Unisen KP-Y4073821 Wireless Electric Pen User Manual

Unisen Limited Wireless Electric Pen

User Manual

WIRELESS ELECTRIC PEN
1. Installation:     Connect the USB RECEIVER and mini PC with supplied USB CABLE : male end is inserted into USB port of MINI PC and another end connected to USB  RECEIVER, as shown below:MINI PCREAR VIEW OF WIHTEBOARDUSB PORTEXTEND USB CABLESUPPORTER FOR USB CABLE
2. Install battery as shown below3. Write on electric whiteboard with pen tip and confirm by pressing  pen tailRF2.4GUSB RECEIVERWIRELESSELE TRIC P  C ENREARVIEW OF WHITEBOARD
4. Re-pair: in case of lost connection with USB RECEIVER or replace either of wireless     electric pen or USB RECEIVER with new part, you need to do re-pair procedure as below:    1. Re-plug USB RECEIVER    2. Hold pen tail and pen tip for about 2 seconds, then release them    3. LED will flash 2 times slowly and it means both pen and USB RECEIVER pairs successfully5. Specifications: .RF 2.4connection .Max wireless distance 10M  .Power supply:DC 1.5V, alkaline battery 1pcs .Size: ø21*179mm .Weight: 30g6. Package: .wireless electric pen    1 .user manual                  1 .Alkaline battery             1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. CAN RSS-Gen/CNR-Gen.- English: This device complies with Industry Canada licence-exempt RSSs standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, includinginterference that may cause undesired operation of the device.- French:Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnem ent.

Navigation menu