User Manual
WIRELESS ELECTRIC PEN 1. Installation: Connect the USB RECEIVER and mini PC with supplied USB CABLE : male end is inserted into USB port of MINI PC and another end connected to USB RECEIVER, as shown below: SUPPORTER FOR USB CABLE EXTEND USB CABLE USB PORT MINI PC REAR VIEW OF WIHTEBOARD 2. Install battery as shown below 3. Write on electric whiteboard with pen tip and confirm by pressing pen tail USB RECEIVER RF2.4G IR EL ES EL EC TR IC PE REARVIEW OF WHITEBOARD 4. Re-pair: in case of lost connection with USB RECEIVER or replace either of wireless electric pen or USB RECEIVER with new part, you need to do re-pair procedure as below: 1. Re-plug USB RECEIVER 2. Hold pen tail and pen tip for about 2 seconds, then release them 3. LED will flash 2 times slowly and it means both pen and USB RECEIVER pairs successfully 5. Specifications: .RF 2.4connection .Max wireless distance 10M .Power supply:DC 1.5V, alkaline battery 1pcs .Size: ø21*179mm .Weight: 30g 6. Package: .wireless electric pen .user manual .Alkaline battery This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. CAN RSS-Gen/CNR-Gen. - English: This device complies with Industry Canada licence-exempt RSSs standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. - French:Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnem ent.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Creation Date--Text : Producer : Corel PDF Engine Version 1.0.0.525 Mod Date--Text : Creator Tool : CorelDRAW 12.0 版 Modify Date : 2015:11:13 10:30:22+08:00 Metadata Date : 2015:11:13 10:30:22+08:00 Format : application/pdf Title : 说明书 Document ID : uuid:5f86b16e-8444-4d4d-9fcd-d9b07a7b0bb7 Instance ID : uuid:821046c1-5f78-4ef1-9f13-f2170016f7cd Page Count : 4 Create Date : D:20151030205604 Creator : CorelDRAW 12.0 版EXIF Metadata provided by EXIF.tools