Unitech Electronics MC7354 Single Modular User Manual

Unitech Electronics Co., Ltd. Single Modular

Contents

User manual

TB160
10.1” Rugged Tablet Computer
Quick Start Guide
Version 1.0
Accessory
TB160
Power Adapter
Stylus
2-Point Carrying Handle
4-point Handstrap
*
For more detailed tablet computer setting, please go to www.ute.com to download the user manual and the
configuration manager utility.
Overview
1. Front camera
2. FN key
3. F1 key
4. F2 key
5. Touch screen
6. Barcode trigger
7. Battery LED
8. Wi-Fi LED
9. FN LED
10. Power LED
11. Power key
12. Volume –
13. Volume +
14. Home key
15. DC-IN jack
16. RS-232
17. Securing holes
18. Rear camera
19. Battery
20. Barcode reader
21. NFC sensing area
22. Expansion bay
23. Stylus holder
24. Kensington lock
25. Pass-through
26. Docking connector
27. USB 2.0
28. Micro-HDMI
29. MicroSD slot
30. Battery Switch
31. Micro SIM slot
32. USB 3.0
33. Audio jack
34. Ethernet
35. Tether hole
Note To prevent damage or malfunction,always dry the touch screen when wet .
2-Point Shoulder Strap
Hitch D-rings (Attaching straps)
Regulatory Compliance Statements
Quick start Guide
QR code card
TB160
10.1” Rugged Tablet Computer
Quick Start Guide
Version 1.0
Charging
*
For more detailed tablet computer setting, please go to www.ute.com to download the user manual and the
configuration manager utility.
Power On
1. Flip open the DC-IN cover to expose the DC-IN jack.
2. Connect the AC adapter to the DC-IN port.
3. After charging,disconnect the AC adapter.
4. Replace th DC-IN cover by angling the rear side at an angle.
5. Press the front open end down in the compartment to seal
in place.
MicroSD Card
SIM Card
1. Open th I/O compartment cover.
2. Switch the DIP switch to the ON position.
3. Install the external battery cover over the battery connector.
4. Press and hold the power button until the screen lights.
The device runs through the start up sequence and powers up.
1. Unlock the latch.
2. Open the I/O compartment cover.
3. Take the microSD card from its packaging.
4. Insert the microSD card into th slot,making sure the beveled
edge is aligned in the slot.
5. Press in until an audible click sounds.
1. Unlock the latch.
2. Open the I/O compartment cover.
3. Take the SIM card from its packaging.
4. Insert the SIM card into th slot,making sure the beveled
edge is aligned in the slot.
5. Press in until an audible click sounds.
: 40
A4
(105mm*148mm)
1173G
:
:
+/- 0.2mm
:

Navigation menu