United Integrated Services WAT-110 WIRELESS AI TRANSDUCER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1133668
Application ID	iC/mx2HlnYUguThbXDwqQQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.4kB (179972 bits)
Date Submitted	2009-07-03 00:00:00
Date Available	2009-07-06 00:00:00
Creation Date	2009-06-16 15:41:35
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2009-06-16 15:41:35
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	levenhuang

Wireless AI Transducer User's Manual
Product Name:
Model No:
Wireless AI Transducer
WAT-110
Input Power: 4~ 20mA
Features Description ::
1.
2.
3.
4.
WAT-110(Wireless AI Transducer) is connected to the industrial control instrument.
Wireless transmission of 4 ~ 20mA analog signal.
Wireless analog signal converter WAT-110 and the wiring is 4 ~ 20mA signal loop serial.
WAT-110(Wireless AI Transducer) is By 4 ~ 20mA current signal conversion work out 3V DC
power supply.
5. Easy to install and configure, Linked with the instrumentation wiring. In the initial use of the
back simply click on Settings button connected with the repeater.
6. WAT-110(Wireless AI Transducer) has a magnet base, can be adsorbed on the iron outside the
box. Foundation stop plate can be fixed on the pillar approach.
Outline Dimensions :
Feature Locator :
1.
2.
3.
4.
Foundation stop plate
State of LED window
Outlet wires
(SET) Setting button
Installation Hints :
1. Need to first WAT-110 (Wireless AI Transducer) and industrial control instrumentation of 4 ~
20mA signal loop connecting thread, we will then start using.
2. WAT-110 (Wireless AI Transducer) leads two features excellent line and described as follows:
a. Black wire
Signal input 4~ 20mA (negative)
b. Red wire
Signal input 4~ 20mA (positive)
2. To match GTF200-FL (Gas detection equipment) as an example, the wiring diagram that is as
follows:
3. The WAT-110 (Wireless AI Transducer) properly then after the loop, after the first power, such
as 3 to 5 minutes to allow (WAT-110) within the first Gold capacitor charging, and then press
(WAT-110) of the SET button at the bottom of, Then press the setting button of WR-110
(Wireless repeater) bottom. Wait for 30 seconds to 1 minute. If LED indicator light flash three
times that means linking success. If LED indicator light flash two times that means fail.
4. Join to link with Gateway, please reference user manual of WCC-110 (Wireless console
controller).
5. Foundation stop plate can be fixed on the pillar approach, the fixed as follows plans:
Troubleshooting:
1. Problem : When link with WR-110 (Wireless repeater), there is no display of LED indicator
light for WAT-110 (Wireless AI Transducer) to flash two or three times.
Solution : a. .Need to confirm with the industrial control instrumentation of the 4 ~ 20mA
signal loop lines connected to a good wiring is correct and there is 4 ~ 20mA
signals, the supply of electricity.
b. May be not press set button, need to link with repeater again.
c. If the above handles are invalid, please contact with agency.
2. Problem : Unable to link with WR-110 (wireless repeater).
Solution: a. It needs to confirm the distance between WAT-110 (Wireless AI Transducer)
and WR-110 (Wireless repeater). Wireless connects in non-camouflage straight
line effective range 10 meters. May pull closer between both distance test to have
a look first, whether to have the improvement segment condition.
Specification:
Wireless AI Transducer
Model No.
WAT-110
Electrical Specification
Transmit Frequency
2.4GHz
Modulation
GFSK
Transmit Power
0 dBm
Channel spacing
1 MHz
Channel NO.
81 Channel(2401~2481Mhz)
Range of operation
10 meters
Operating voltage
3.0V DC
Current (typical)
Working:
(Power from Current Loop)
14mA Peak
Standby:
1 uA Max
Input Signal (Current )
4-20mA *1
Display Type
Red LED indicator
Operation Interface
Push button switch for setting
Environmental Requirement
Operating temperature
-20°C to 60°C
Storage temperature
-20°C to 70°C
Humidity
90% RH Max. Non-Condensing
Mechanical Specification
Dimension (WxHxD, mm)
40x80x22
Weight
36g
Pin Assignment
Pin 1- (Red )
Positive 4-20mA Signal Input
Pin 2- (White)
Negative 4-20mA Signal Input
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
–
–
–
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
–
Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Canada Warning
"Industry Canada regulatory information Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference,
including
interference that may cause undesired operation of the device.""The user is cautioned that this
device should be used only as specified within this manual to meet RF exposure
requirements. Use of this device in a manner inconsistent with this manual could lead to
excessive RF exposure conditions."

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : levenhuang
Create Date                     : 2009:06:16 15:41:35+08:00
Modify Date                     : 2009:06:16 15:41:35+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Title                           : <4D6963726F736F667420576F7264202D20303931313635525FAD5EA4E55FA8CFA5CEBBA1A9FAAED15F5741542D3131305FB54CBD75C3FEA4F1B054B8B9C2E0B4ABBEB95F323030395F30A14B>
Creator                         : levenhuang
Document ID                     : uuid:d754b9d5-1c30-47b1-8850-9d6865d03e35
Instance ID                     : uuid:121d66c7-2feb-41f1-a50c-0c6526a6e686
Page Count                      : 5

EXIF Metadata provided by EXIF.tools