United Integrated Services WTS-110 WIRELESS TEMPERATURE SENSOR User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1126175
Application ID	LuDfmdhrKkPQLWP+cO9qqw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.99kB (162384 bits)
Date Submitted	2009-06-18 00:00:00
Date Available	2009-06-19 00:00:00
Creation Date	2009-06-16 13:41:38
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2009-06-16 13:41:38
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	anitachou

Wireless Temperature Sensor User's Manual
Product Name:
Wireless Temperature Sensor
Model No: WTS-110
Input Power: 3V DC
Features Description:
1. Wireless transmission of ambient temperature signals to the repeater, we can see that
WTS-110 (Wireless Temperature Sensor) department placed ambient temperature values.
2. Use CR2032 type Li-ion batteries, battery power is insufficient to inform the host will
automatically operate a very low power; the battery can be used for more than one and half
years.
3. Easy link, when install at the first time to press the set button on the side of product binding
with repeater.
Outline Dimensions:
Feature Locator:
1.
2.
3.
4.
Foundation stop plate
State of LED window
battery holder
(SET) Setting button
Installation Hints:
1. Need to WTS-110 (Wireless Temperature Sensor) Foundation stop plate installed on the walls
of the room to detect in order to start using.
2. WTS-110 (Wireless Temperature Sensor) Battery installation instructions are as follows maps,
Add spin to open the battery holder, and then can be closed.
(Attention: CR2032 Battery Positive side up)
3. WTS-110 (Wireless Temperature Sensor) mounted to the Foundation stop plate described
below map, linked to the drop of a good position to.
4. WTS-110 (Wireless Temperature Sensor) by pressing the SET button at the bottom, and then
press the WR-110 (wireless repeater) at the bottom of the SET button, Wait for 30 seconds to
1 minute. If LED indicator light flash three times that means linking success. If LED indicator
light flash two times that means fail.
5. Join to link with Gateway, please reference user manual of WCC-110 (Wireless console
controller).
6. Under the Foundation stop plate can map the location of locking screw holes in order to pay
Gum adhesive or screw fixed way, Easy DIY installation of WTS-110(Wireless Temperature
Sensor) fixed at any location in the room. .
Troubleshooting:
1. Problem : When link with WR-110 (Wireless repeater), there is no display of LED
indicator light for WTS-110 (Wireless Temperature Sensor) to flash two or
three times.
Solution : a. Need to make sure the battery is good there is electricity, the installation of the
battery positive and negative direction is correct.
b. May be not press set button, need to link with repeater again.
c. If the above handles are invalid, please contact with agency.
2. Problem : Unable to link with WR-110 (wireless repeater).
Solution : a. It needs to confirm the distance between WTS-110 (Wireless Temperature
Sensor) and WR-110 (Wireless repeater). Wireless connects in non-camouflage
straight line effective range 10 meters. May pull closer between booth's distance
tests to have a look first, whether to have the improvement segment condition.
Specification:
Wireless Temperature Sensor
Model No.
WTS-110
Electrical Specification
Transmit Frequency
2.4GHz
Modulation
GFSK
Transmit Power
0 dBm
Channel spacing
1 MHz
Channel NO.
81 Channel(2401~2481Mhz)
Range of operation
10 meters
Operating voltage
3.0V DC
Current (typical)
Working:
14mA Peak
Standby:
1 uA Max
Battery Type
CR2032
Battery Quantity (PCS)
Sensor Type
NTC THERMISTOR
Sensor Detect Range
-20°C to 60°C
Display Type
Red LED indicator
Operation Interface
Push button switch for setting
Environmental Requirement
Operating temperature
-20°C to 60°C
Storage temperature
-20°C to 70°C
Humidity
90% RH Max. Non-Condensing
Mechanical Specification
Dimension (WxHxD, mm)
34x66x15
Weight (No Battery)
23 g
Weight (Include Battery)
26 g
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
–
–
–
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
–
Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : anitachou
Create Date                     : 2009:06:16 13:41:38+08:00
Modify Date                     : 2009:06:16 13:41:38+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : anitachou
Title                           : <4D6963726F736F667420576F7264202D20303931313633525FAD5EA4E55FA8CFA5CEBBA1A9FAAED15F5754532D3131305FB54CBD75B7C5ABD7B0BBB4FABEB95F323030395F30365F3039A14B>
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:b75fefd3-be8c-4911-87b1-0db415275b8b
Instance ID                     : uuid:48da3a21-c8c3-4ecc-8e2c-21fbcf0ef5d7
Page Count                      : 5

EXIF Metadata provided by EXIF.tools