Universal Electronics 2051 Star Choice URC 551 IR/UHF Remote Control User Manual Star Choice IRC URC IR UHF Rev 2 3

Universal Electronics Inc Star Choice URC 551 IR/UHF Remote Control Star Choice IRC URC IR UHF Rev 2 3

Owners Manual Part 1

Star Choice IRC 551 IR Remote ControlandStar Choice URC 551 IR/UHF Remote ControlTélécommande IRC 551 IR de Star ChoiceetTélécommande URC 551 IR/UHF de Star ChoiceUsers GuideGuide d'utilisationStarchoice.comMotorola 551 IR_IR-UHF Rev 2.3.fm Page 1 Friday, May 26, 2006 12:27 PM
2TABLE OF CONTENTSIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Key Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Installing Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9If You Have More Than One Satellite Receiver. . . . . . . . . . . . . . . . . 10Programming Device Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Programming TV/VCR Combo Control . . . . . . . . . . . . . . . . . . . . . . .13Searching for Your Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Checking the Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Programming Channel Control Lock . . . . . . . . . . . . . . . . . . . . . . . . 15Unlocking Channel Control. . . . . . . . . . . . . . . . . . . . . . . . . . . 16Locking Channel Control to SAT . . . . . . . . . . . . . . . . . . . . . . .16Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Unlocking Volume Control for a Single Device (Individual Volume Unlock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Unlocking All Volume Control (Global Volume Unlock) . . . . . 17Locking Volume Control To One Mode (Global Volume Lock) 17Using the Master Power Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Programming the Master Power Key . . . . . . . . . . . . . . . . . . . 18Using the Master Power Key. . . . . . . . . . . . . . . . . . . . . . . . . .19Clearing the Master Power Key . . . . . . . . . . . . . . . . . . . . . . .19Re-Assigning Device Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19Disabling DVD and AUX Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Disabling DVD and AUX Modes . . . . . . . . . . . . . . . . . . . . . . . .20Enabling DVD and AUX Modes. . . . . . . . . . . . . . . . . . . . . . . . . 21Clearing Custom Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . .21Removing Volume Lock and Channel Lock Programming . . . 21Removing All Custom Programming. . . . . . . . . . . . . . . . . . . .21FCC Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Table Des Matières . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24Manufacturer’s Codes (Codes des fabricants) . . . . . . . . . . . . . . . . 50Setup Codes for TVs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Setup Codes for Audio Amplifiers. . . . . . . . . . . . . . . . . . . . . . 58Setup Codes for Audio Amp/Tuners . . . . . . . . . . . . . . . . . . . .59Setup Codes for Miscellaneous Audio . . . . . . . . . . . . . . . . . . 63Setup Codes for Cable Boxes/Converters . . . . . . . . . . . . . . .64Setup Codes for DVD Players . . . . . . . . . . . . . . . . . . . . . . . . . 65Setup Codes for DVRs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71Setup Codes for Satellite Receivers . . . . . . . . . . . . . . . . . . .72Setup Codes for TV/DVD Combos . . . . . . . . . . . . . . . . . . . . . .74Setup Codes for TV/VCR Combos . . . . . . . . . . . . . . . . . . . . . .75Setup Codes for VCRs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76Motorola 551 IR_IR-UHF Rev 2.3.fm Page 2 Friday, May 26, 2006 12:27 PM
3INTRODUCTIONThe Star Choice IRC 551 IR and Star Choice URC 551 IR/UHF Remote Controls by Universal Electronics are our latest generation universal remote controls. Their sophisticated technology allows you to consolidate up to five of your original home entertainment remote controls into one easy-to-use product. Moreover, they’re packed with advanced features such as: • Preprogrammed control to operate the satellite receiver supplied by your satellite service provider • Dedicated keys to control popular functions on your DVR (Digital Video Recorder) • Programmable Master Power key for master on/off control of your home entertainment equipment with a single keystroke • An Instant Tune-In key for assignment to your favorite channels • Channel Lock to lock channel selection only to the satellite receiver • Volume Lock to lock volume controls to one mode or individual modes • Device Key Re-Assignment to remotely control a second (duplicate) device • Code Search to help program control of older or discontinued components • Color-coded keys to quickly locate popular functions • Code library for popular video and audio devices Before using the product, you need to install the enclosed batteries and also perform some programming to operate the specific home entertainment devices you wish to control. Please follow the instructions detailed in this manual to set up the unit and then start enjoying your new remote control and satellite service. Motorola 551 IR_IR-UHF Rev 2.3.fm Page 3 Friday, May 26, 2006 12:27 PM
4FEATURES AND FUNCTIONSUse the illustrations below to locate features on the Star Choice IRC 551 IR and Star Choice URC 551 IR/UHF Remote Controls and then study the Key Charts (on the next three pages) to learn how they function. To find out what type of devices can be controlled by each device key after programming, see “Device Table” on page 8. Star Choice URC 551 IR/UHF Remote ControlMotorola 551 IR_IR-UHF Rev 2.3.fm Page 4 Friday, May 26, 2006 12:27 PM
5Star Choice IRC 551 IR Remote ControlMotorola 551 IR_IR-UHF Rev 2.3.fm Page 5 Friday, May 26, 2006 12:27 PM
6Key Charts Key FunctionPress POWER once to turn on or off a home entertainment device. For MASTER POWER control, see “Using the Master Power Key” on page 18. Press AUDIO, AUX, DVD, SAT, or TV once to select a home entertainment device to control. Also see “Device Table” on page 8. Each device key has an embedded LED (red light) that blinks upon selection and indicates the remote control is working and (after programming) is sending signals. Use GUIDE to display the program guide. Press INTERACTIVE once to display the Interactive menu. (For future interactive applications)Use INFO to display the current channel and program information. Use the cursor keys to move the cursor in the program guide and menu screens and to navigate within the interactive service. Use ENTER/OK to choose options, PPV events, and to tune programs from the program guide. Use EXIT to exit out of your satellite receiver’s menu and guide. Use A, B, C or D to access additional satellite features. (For future interactive applications). Use VOL+ (or VOL-) to raise (or lower) the audio volume. Motorola 551 IR_IR-UHF Rev 2.3.fm Page 6 Friday, May 26, 2006 12:27 PM
7In GUIDE mode, use FAVOURITES to cycle through your favourite-channels listings. The default is All Channels.While watching TV, use FAVOURITES to step through the pre-set favourite channels listing you selected in Guide mode.Use CH+ (or CH-) to select the next higher (or lower) channel. For DVD players, use these keys to skip forward (or reverse) through chapters. For amplifiers/receivers, use these keys to select the next higher (or lower) preset station. Press MUTE once to turn the sound off or on. Press LAST Ch once to recall the last channel. Press INTERESTS to display the Interests menu.Press PPV to access Pay Per View services.Use BROWSE to display the current program title at the bottom of the screen. BROWSE also activates the navigator buttons S, T, W, Xto preview the program titles on other channels or at a later time.Press LOCKS to display the Parental Controls menu.Press OPTIONS to access the Options menu of your satellite receiver.Use to command your recording to Skip Back in steps of 10 second- (default) intervals. Not available on the Star Choice IRC 551 IR Remote Control.Key FunctionMotorola 551 IR_IR-UHF Rev 2.3.fm Page 7 Friday, May 26, 2006 12:27 PM
8Device Table NOTE: Please refer to the table below when performing the instructions in “Programming Device Control” on page 11 or “Programming TV/VCR Combo Control” on page 13.Use to command your recording to Skip Forward in steps of 30-second (default) intervals. Note: In GUIDE mode, pressing Skip Forward advances the guide by 24-hour increments.Not available on the Star Choice IRC 551 IR Remote Control.Press DVR LIST once to display a list of recorded shows on your DVR.Not available on the Star Choice IRC 551 IR Remote Control.Press GO BACK to return to watching TV or the previous menu. Use REC, REW, PLAY, FFWD, STOP, and PAUSE to control a VCR, DVD player, or a DVR (after selecting a desired device).Note: In GUIDE mode, pressing FFWD advances the guide by 6-hour increments. Use the keypad numbers (1-9, and 0) to directly tune channels (e.g., 09). For amplifiers/receivers, use the keypad numbers to select inputs 1 through 10. Press ASPECT once to change the aspect ratio of the show you are watching. (Not available on all set-top boxes.)Not available on the Star Choice IRC 551 IR Remote Control.Use VIDEO SOURCE to watch TV or video programs on a desired device.Press HELP to access the Help menu.Key FunctionMotorola 551 IR_IR-UHF Rev 2.3.fm Page 8 Friday, May 26, 2006 12:27 PM
9After programming, the Star Choice IRC 551 IR and Star Choice URC 551 IR/UHF Remote Controls can control the following types of devices: INSTALLING BATTERIES1. On the back of the remote control, push the tab and lift off the battery cover.Device Key Controls these types of devices Satellite ReceiverAudio Amplifier, Tuner, Receiver, Satellite Receiver, Television Television, Satellite Receiver, Audio Amplifier, Audio ReceiverDVD Player, VCR, TV-DVD Combos, TV-VCR Combos, Audio Amplifier, Audio Receiver, Satellite Receiver Telev ision ❶❷❸Motorola 551 IR_IR-UHF Rev 2.3.fm Page 9 Friday, May 26, 2006 12:27 PM
102. Locate the two (2) enclosed AA batteries. Match the + and - marks with those in the battery case, then insert them. 3. Align the cover’s keys with the case’s holes and press the cover back into place. The tab should click when the cover is locked.NOTE: When batteries need replacement, the remote control ceases to operate. Replace the batteries and the unit is restored to its full functionality, complete with your favorite settings. IF YOU HAVE MORE THAN ONE SATELLITE RECEIVERYour remote control address is set at the factory to 0000 to control all of the functions on your Motorola satellite receiver. However, if you have more than one satellite receiver, you may want to prevent the remote control in one room from affecting the satellite receiver in another room. To prevent this kind of interference, you must “pair” each remote control with each receiver by assigning a new “address” to each combination. This “address” assignment is made using your remote control as follows:1. Turn on the TV.4. Test the remote control by pressing any mode key (e.g., TV). If the batteries are inserted correctly, the LED (red light) blinks once.2. Press the SAT key to select the remote control’s SAT mode. 3. Press the Options key to display the Options screen on your TV. 4. On the Options screen, use the S, T, W, X keys to highlight the Change System Settings/System Setup option, then press ENTER. 5. On the Systems Setting /Setup screen, use the S, T, W, X keys to highlight the Change Installation Settings/System Settings option, then press ENTER. (Applies to DSR 5xx, 207, 317 receivers.)Motorola 551 IR_IR-UHF Rev 2.3.fm Page 10 Friday, May 26, 2006 12:27 PM
11Note: An addressed remote control will only work with the satellite receiver that has the same remote control address that it is paired with. PROGRAMMING DEVICE CONTROLThe Star Choice IRC 551 IR and Star Choice URC 551 IR/UHF Remote Controls are preprogrammed to operate a Motorola satellite receiver, a Sony TV, a Sony DVD player, a Panasonic audio amplifier (as an AUX device), and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps; otherwise skip this section.NOTE: For TV/VCR Combo control, skip this section and perform the instructions on “Program-ming TV/VCR Combo Control” on page 13. Also refer to “Device Table” on page 8 to find 6. On the System Settings screen, use the S, T, W, X keys to highlight the Installation Settings option, then press ENTER. (Applies to DSR 5xx, 207, 317 receivers.)7. On the Installation Settings screen, use the S, T, W, X keys to highlight the Remote Control Address option, then press ENTER. 8. Press and hold the SAT key on your Remote Control until it flashes. 9. Using the remote control’s number key pad, enter the dedicated code listed below for each address: • ADDRESS 0: Press 00869• ADDRESS 1: Press 01870• ADDRESS 2: Press 01871• ADDRESS 3: Press 01872• ADDRESS 4: Press 01873• ADDRESS 5: Press 01874• ADDRESS 6: Press 01875• ADDRESS 7: Press 0187610. Press ENTER to confirm the new remote address and pair it with the satellite receiver. The Current Address window will now display the new address. Motorola 551 IR_IR-UHF Rev 2.3.fm Page 11 Friday, May 26, 2006 12:27 PM
12out which devices can be programmed onto each device key. 1. Turn on a device and, if applicable, insert video media, (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2. 3. Use the “Manufacturer’s Codes (Codes des fabricants)” starting on page 50) to locate the type of device and brand name and then enter the first five-digit code for your device. If performed correctly, the selected mode key blinks twice. NOTE: If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again. NOTE: If the device does not have a POWER key, press the(Play) key. 5. Repeat steps 1 through 4 for each device you want the remote control to operate. For future reference, write down each working device code in the boxes on the following page. AUX Code Device Type:___________________ DVD Code Device Type:___________________ AUDIO Code 2. On the remote control, press and hold a device key (i.e., AUDIO, AUX, DVD, SAT, or TV ) until the selected mode key blinks twice.4. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try searching for the code (see “Searching for Your Code” on page 14). Motorola 551 IR_IR-UHF Rev 2.3.fm Page 12 Friday, May 26, 2006 12:27 PM
13Device Type:___________________ TV Code Device Type:___________________ PROGRAMMING TV/VCR COMBO CONTROL If you own a TV/VCR Combo, perform the following instructions to control this device: 1. Turn on your TV/VCR Combo and insert a video cassette. 3. Use the “Manufacturer’s Codes (Codes des fabricants)” starting on page 50 to locate the brand name and enter the first five-digit code for your TV/VCR Combo. If you perform this procedure correctly, the AUX key blinks twice. NOTE: If the AUX key did not blink twice after enter-ing the codes last digit, repeat steps 2 through 3 and try entering the same code again. If you’ve located a TV/VCR setup code that works for your TV/VCR Combo and a separate TV code is also listed, you’ll need to program this code into the remote control to access vol-ume control (see “Programming Device Con-trol” starting on page 11). 5. For future reference, write down each working device code in the boxes below:TV/VCR Code 2. On the remote control, press and hold AUX until it blinks twice. 4. Aim the remote control at your TV/VCR Combo and press POWER once. The device should turn off. If it does not respond, repeat steps 2 through 3, trying each code listed for your brand until you find one that works. If it still does not respond, try searching for the code (“Searching for Your Code” starting on page 14). Motorola 551 IR_IR-UHF Rev 2.3.fm Page 13 Friday, May 26, 2006 12:27 PM
14TV Code (if used)SEARCHING FOR YOUR CODEIf your home entertainment device does not respond to the Star Choice IRC 551 IR and Star Choice URC 551 IR/UHF Remote Controls after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV: 1. Turn on your TV.7. To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate key (e.g., AUX, DVD, AUD, or SAT) for the device you are searching for. CHECKING THE CODESIf you have set up the Star Choice IRC 551 IR and Star Choice URC 551 IR/UHF Remote Controls by searching for your device code (on the previous page), you may need to find out which five-digit code is operating your equipment. 2. On the remote control, press and hold TV for three seconds. TV blinks twice. 3. Enter 9 9 1. The TV key blinks twice. 4. Aim the remote control at the TV and press POWER once. 5. Press CH+ one or more times and stop when the TV turns off. NOTE: In the search mode, the remote control sends IR codes from its library to the selected device, starting with the most popular code first. 6. Press TV once to lock in the code. The TV key blinks twice. Motorola 551 IR_IR-UHF Rev 2.3.fm Page 14 Friday, May 26, 2006 12:27 PM
15For example, to find out which code is operating your TV: 5. To check for other device codes, repeat steps 1 through 4, but substitute the appropriate key (e.g., AUX, DVD, AUD, or SAT) for the device you are checking. Write down the codes in the appropriate boxes on page 13.PROGRAMMING CHANNEL CONTROL LOCKBy default, the remote control’s channel-control capabilities are locked to the satellite receiver. The affected keys* are 1 through 0, CH+, CH-, ENTER, and LAST. This guarantees that you do not inadvertently change a channel on your TV or VCR. However, you can de-activate this feature to allow full access to these keys in the TV and VCR modes. *NOTE: This feature does not affect the AUDIO mode. 1. On the remote control, press and hold TV until it blinks twice. 2. Enter 9 9 0. The TV key blinks twice.3. To view the code for the first digit, press 1 once. Count the number of times the TV key blinks (e.g., 3 blinks = 3) and write down the number in the leftmost TV Code box on page 13. NOTE: If a code digit is 0, the selected mode key does not blink. 4. Repeat step 3 five more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, 4 for the fourth digit. and 5 for the fifth digit. Finish writing down the code in the TV Code boxes on page 13. Motorola 551 IR_IR-UHF Rev 2.3.fm Page 15 Friday, May 26, 2006 12:27 PM
16Unlocking Channel ControlNow the remote control provides TV and VCR channel-control capabilities while in the TV or VCR mode. Locking Channel Control to SATNow, regardless of what mode you select (except AUDIO), the channel keys only change channels on your satellite receiver. CHANGING VOLUME LOCK Volume Lock allows you to control the volume through the device identified as having your primary speaker(s), regardless of which mode you are using. On the Star Choice IRC 551 IR and Star Choice URC 551 IR/UHF Remote Controls, Global Volume Lock is set to TV, so you can control TV volume while in the AUX, DVD, TV or SAT mode. You can perform Individual Volume Unlock on a selected device to set its volume control for independent operation. NOTE: The audio mode’s (AUDIO) volume controls are active regardless of Volume Lock settings. However, if you lock the volume controls to the AUDIO mode, you have control of the audio device’s volume in all other modes (i.e., AUX, DVD, TV, and SAT). This can be an advantage if, for example, you always listen to home enter-1. On the remote control, press and hold SAT until it blinks twice. 2. Enter 9 7 3. The SAT key blinks twice. 3. Press CH- once. The SAT key blinks four times.1. On the remote control, press and hold SAT until it blinks twice. 2. Enter 9 7 3.The SAT key blinks twice. 3. Press CH+ once. The SAT key blinks twice.Motorola 551 IR_IR-UHF Rev 2.3.fm Page 16 Friday, May 26, 2006 12:27 PM
17tainment devices through your receiver’s speakers.Unlocking Volume Control for a Single Device (Individual Volume Unlock)4. Repeat steps 1 through 3 for each device you want volume to be unlocked. Now, after you select a device that has volume unlocked (e.g., SAT), pressing VOL+, VOL-,or MUTE, controls only that device’s volume.Unlocking All Volume Control (Global Volume Unlock)NOTE: Performing these instructions sets indepen-dent volume control for all programmed devices. Locking Volume Control To One Mode (Global Volume Lock)NOTE: The audio mode’s volume controls are active regardless of Volume Lock settings. However, if you lock the volume controls to the AUDIO mode, you control the audio device’s volume in all other modes (i.e., AUX, DVD, TV, or SAT). This can be an advantage if, for example, you always listen to home entertainment devices through your receiver’s speakers.1. Assuming Global Volume Lock is active, select a mode on the remote control that you want to unlock (e.g., SAT). Press and hold SAT until it blinks twice.2. Enter 9 9 3. SAT blinks twice. 3. Press VOL- once. SAT blinks four times. 1. On the remote control, press and hold a device key (e.g., DVD) until it blinks twice.2. Enter 9 9 3. DVD blinks twice.3. Press VOL+ once. DVD blinks four times. Motorola 551 IR_IR-UHF Rev 2.3.fm Page 17 Friday, May 26, 2006 12:27 PM
18Now, when you press VOL+, VOL-,or MUTE, the volume of the selected device (e.g., TV) is controlled regardless of mode.USING THE MASTER POWER KEY The Star Choice IRC 551 IR and Star Choice URC 551 IR/UHF Remote Controls have a unique feature that allows you to sequentially turn up to five of your home entertainment devices on or off with a single key press. NOTE: The MASTER POWER (POWER) default setting is the SAT mode. If it is not programmed, only the satellite receiver and television turn on or off. In any other mode, pressing MASTER POWER (POWER) once turns the selected device on or off. Programming the Master Power Key5. Repeat step 4 up to four more times to add the second, third, fourth, and fifth device, as desired. 1. On the remote control, press and hold a device key, (e.g., SAT) until it blinks twice.2. Enter 9 9 3. SAT blinks twice.3. Select a mode (e.g., TV or AUDIO) which you want to use to control the volume. The selected device key blinks twice.1. On the remote control, press and hold a device key (e.g., DVD) until it blinks twice.2. Enter 9 9 5. DVD blinks twice.3. Press POWER once.4. For the first device you want in the power on sequence, press a device key (e.g., AUDIO) once. Then press POWER once. Motorola 551 IR_IR-UHF Rev 2.3.fm Page 18 Friday, May 26, 2006 12:27 PM
19Using the Master Power KeyYou see the devices turn on or off according to the programmed sequence.Clearing the Master Power KeyRE-ASSIGNING DEVICE KEYS The Star Choice IRC 551 IR and Star Choice URC 551 IR/UHF Remote Controls can be set up to control a second device of an already-assigned type. For example, to have the unit control a TV, a Satellite Receiver, and two DVD players, re-assign the unused AUX key to operate the second DVD Player as follows: NOTE: AUX is preset at the factory to control an Pana-sonic audio amplifier. Performing the steps below overwrites those settings. The AUX key is now ready to be programmed for your second DVD player. See “Programming Device Control” 1. After programming, point the remote control at the devices. Press the key for a device (e.g., DVD) once. 2.Press and hold POWER for 1.5 seconds to sequentially turn the programmed home entertainment devices on or off. 1. On the remote control, press and hold a device key (e.g., DVD) until it blinks twice. 2. Enter 9 9 5. The last-selected device key blinks twice. 3. Press and release the MASTER POWER key.1. On the remote control, press and hold AUX until it blinks twice. 2. Enter 9 9 2. AUX blinks twice.3. Press DVD once, then press AUX once. The AUX key blinks twice. Motorola 551 IR_IR-UHF Rev 2.3.fm Page 19 Friday, May 26, 2006 12:27 PM
20on page 11. To re-assign other device keys, repeat these and substitute the key sequence using the following chart: NOTE: Only one device can be assigned to an unused device key at a time. To re-assign another unused device key, substitute it for the AUX key above and then perform the sequence. For example, to re-assign an unused AUDIO key as a second DVD key, perform AUDIOÆ9Æ9Æ2ÆDVDÆAUDIO. When a re-assignment is done, the selected device key (e.g., AUDIO) blinks twice to confirm your choice. At that time, you need to program device control (see “Programming Device Control” on page 11). DISABLING DVD AND AUX MODESIf you do not have a DVD player or auxiliary device (such as an audio amplifier) connected to your home entertainment system, you may want to disable the DVD and AUX modes. To disable DVD and AUX modes, perform the following steps:Disabling DVD and AUX ModesNote: A disabled DVD or AUX key does not blink when you press it. The disabled key does not send a code when MASTER POWER is acti-vated.To Re-Assign Perform Key Sequence AUX as 2nd AUDIO keyAUXÆ9Æ9Æ2ÆAUDIOÆAUX AUX as 2nd TV keyAUXÆ9Æ9Æ2ÆTVÆAUX AUX as 2nd SAT keyAUXÆ9Æ9Æ2ÆSATÆAUX AUX back to AUXAUXÆ9Æ9Æ2ÆAUXÆAUX 1. Press and hold the mode key (either DVD or AUX) until the key blinks twice.2. Enter 9 9 9. 3. The mode key you have selected (either DVD or AUX) blinks twice.4. Repeat steps 1 through 3 above for the other key you wish to disable (either DVD or AUX).Motorola 551 IR_IR-UHF Rev 2.3.fm Page 20 Friday, May 26, 2006 12:27 PM

Navigation menu