Universal Electronics 5550 UEI RF4CE USB Dongle 2012 User Manual Pairing insturctions 03
Universal Electronics Inc UEI RF4CE USB Dongle 2012 Pairing insturctions 03
User Manual
Remote and RF Adapter Pairing IN ORDER FOR THE REMOTE CONTROL AND RF ADAPTER TO COMMUNICATE, THEY MUST BE PAIRED. FOLLOW THE INSTRUCTIONS BELOW TO PAIR THE KEYBOARD REMOTE CONTROL WITH THE RF ADAPTER. IN ORDER FOR THE REMOTE CONTROL AND RF ADAPTER TO COMMUNICATE, THEY MUST BE PAIRED. FOLLOW THE INSTRUCTIONS BELOW TO PAIR THE KEYBOARD REMOTE CONTROL WITH THE RF ADAPTER. Insert RF Adapter into an open USB port Insert RF Adapter into an open USB port Press the PAIR button on the RF adapter Press the PAIR button on the RF adapter PAIR USB USB Press and hold SETUP and NAVIGATE UP buttons simultaneously for 3 seconds Press and hold SETUP and NAVIGATE UP buttons simultaneously for 3 seconds If pairing is successful, the POWER key on the remote will blink twice If pairing is successful, the POWER key on the remote will blink twice The POWER key on the remote will blink rapidly while the remote is in RF pairing mode The POWER key on the remote will blink rapidly while the remote is in RF pairing mode If pairing is not successful, repeat steps 2-5.. Si el televisor no se apaga, repita este proceso utilizando el siguiente código para su marca de TV. ©Copyright Universal Electronics 2012 Clear Pairing Information YOU MAY HAVE TO CLEAR PAIRING INFORMATION IF YOU WISH CREATE A NEW REMOTE/RF ADAPTER PAIRING. HERE IS HOW TO CLEAR PAIRING INFORMATION ON THE RF ADAPTER AND REMOTE. YOU MAY HAVE TO CLEAR PAIRING INFORMATION IF YOU WISH CREATE A NEW REMOTE/RF ADAPTER PAIRING. HERE IS HOW TO CLEAR PAIRING INFORMATION ON THE RF ADAPTER AND REMOTE. With the RF Adapter plugged into a USB port and powered on, press and hold the PAIR button for 5 seconds until the LED blinks 4 times. With the RF Adapter plugged into a USB port and powered on, press and hold the PAIR button for 5 seconds until the LED blinks 4 times. PAIR Press and hold SETUP and NAV DOWN on the remote control simultaneously until the POWER button blinks four times to confirm pairing information has been cleared. Press and hold SETUP and NAV DOWN on the remote control simultaneously until the POWER button blinks four times to confirm pairing information has been cleared. PAIR Federal Communication Commission Interference Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. ©Copyright Universal Electronics 2012
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Create Date : 2012:11:20 16:26:36-07:00 Creator : Adobe Illustrator CS5.1 Modify Date : 2012:11:26 16:29:29-08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Title : Pairing insturctions 03 Metadata Date : 2012:11:26 16:29:29-08:00 Creator Tool : Adobe Illustrator CS5.1 Thumbnail Width : 256 Thumbnail Height : 156 Thumbnail Format : JPEG Thumbnail Image : (Binary data 14524 bytes, use -b option to extract) Instance ID : uuid:402a63e9-fef8-446e-9775-edca4e78c2b4 Document ID : xmp.did:AD31A70B7233E211BF08F1BBC404D6D7 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:AC31A70B7233E211BF08F1BBC404D6D7 Derived From Document ID : xmp.did:AC31A70B7233E211BF08F1BBC404D6D7 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved, saved, saved, saved History Instance ID : xmp.iid:5B2B535DA7D6E1118618D7A56FC1A725, xmp.iid:3767F1D666D7E111AB73B3CE5F94F756, xmp.iid:54864ABC2C2DE211B6CAC03C8778EFFB, xmp.iid:AC31A70B7233E211BF08F1BBC404D6D7, xmp.iid:AD31A70B7233E211BF08F1BBC404D6D7 History When : 2012:07:25 15:23:31-07:00, 2012:07:26 15:35:43-07:00, 2012:11:12 16:54:53-08:00, 2012:11:20 16:26:08-08:00, 2012:11:20 16:26:30-08:00 History Software Agent : Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1 History Changed : /, /, /, /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 612.000000 Max Page Size H : 792.000000 Max Page Size Unit : Points Font Name : FuturaBT-ExtraBlack, MyriadPro-Regular, MyriadPro-BoldCond, ZurichBT-BlackExtended Font Family : Futura XBlk BT, Myriad Pro, Myriad Pro, Zurich BlkEx BT Font Face : Extra Black, Regular, Bold Condensed, Black Font Type : TrueType, Open Type, Open Type, TrueType Font Version : mfgpctt-v1.52 Tuesday, January 12, 1993 3:49:39 pm (EST), Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, mfgpctt-v1.52 Wednesday, January 13, 1993 4:28:00 pm (EST) Font Composite : False, False, False, False Font File Name : FUTURAXK.TTF, MyriadPro-Regular.otf, MyriadPro-BoldCond.otf, ZURCHKE.TTF Plate Names : Cyan, Magenta, Yellow, Black, Black 2 2 Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Red : 234 Swatch Groups Colorants Green : 249 Swatch Groups Colorants Blue : 255 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 9.90 Page Count : 2 For : Alvarado, Cesar, Bounding Box : 28 -787 1313 -12 Container Version : 11 Creator Version : 15EXIF Metadata provided by EXIF.tools