Universal Electronics 62400 NevoCL User Manual NevoQ50 Quick Start Guide

Download:
Mirror Download [FCC.gov]
Document ID	857948
Application ID	tcXP7AAfOOb4SlI76S/4FA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	96.72kB (1208993 bits)
Date Submitted	2007-10-22 00:00:00
Date Available	2007-10-22 00:00:00
Creation Date	2007-10-02 15:13:58
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2007-10-11 17:14:59
Document Title	NevoQ50 Quick Start Guide.fm
Document Creator	PScript5.dll Version 5.2
Document Author:	Stefanie Henke

NevoQ50 provides fully-customizable control of all of your home theater
devices. Its touch-sensitive screen is software-based, so your installer/
integrator can include just those controls you actually use.
Before You Use NevoQ50
Please ensure your Nevo Q50 is fully charged before use.
NevoQ50 Universal
Controller
Charging Cradle
AC Power
Adapter; varies
by country
To charge your Nevo Q50:
1. Connect the power adapter to the
charging cradle and plug the adapter
into a wall outlet.
2. Power on and dock NevoQ50 to begin
charging the battery. If it has not
already been charged, it will take 3-4 hours to fully charge the battery the
first time.
Recharging NevoQ50
Nevo Q50 has a built-in Lithium-ion rechargeable battery. NevoQ50 beeps and
displays a warning message when the battery is running low. You should dock
Nevo Q50 at this time to charge the battery.
You can dismiss the warning message by clicking OK; if you do so and the
battery power becomes critically low, NevoQ50 will beep and display a
critical low battery warning message. You cannot dismiss this message and
should dock NevoQ50 immediately.
To dock Nevo Q50, simply set the controller in the charging cradle. When it
is correctly docked, the blue light will appear on the bottom of the remote.
About Battery Life
As with all battery-operated devices, battery life will vary depending on
use. It is a good practice to keep NevoQ50 in its charging cradle when you
are not using it.
Getting to Know NevoQ50
NevoQ50 offers the following types of controls:
Touchscreen: To use the touchscreen, gently touch the buttons that appear
on it. If you prefer, slide the stylus from its storage port on the bottom of
NevoQ50:
Using the stylus, gently tap buttons on
the touchscreen to control your home
theater and home automation devices.
You may prefer to always use the stylus
when you are configuring settings. Talk
with your installer/integrator for more
Stylus
information on these settings.
NevoQ50 Keys: The keys on
NevoQ50 have been customized
to your preference by your
installer/integrator. An
additional set of unlabeled
keys (function keys) appear
immediately below the
touchscreen, above the hard
buttons. A label appears on the
touchscreen above them to
indicate the functions assigned
to those keys.
LEFT SIDE
On/Off Switch
up=ON
down=OFF
USB Port
Function
Keys
Hard
Keys
BACK
RIGHT SIDE
Reset
Button
Toggle Wheel
Programmable
Home Key
Move the toggle wheel up and down to move between the screens. Press the
toggle wheel in to return to the first page of the current page collection.
Note: The On/Off Switch must be moved completely into the up or down
position to turn Nevo Q50 on or off.
Caring for NevoQ50
Use only the stylus to switch Nevo Q50 on or off. Avoid using sharp objects.
Clean your remote with a soft, damp cloth using a gentle, non-caustic cleaner.
CAUTION:Do not use a caustic or abrasive cleaner. This may damage the
surface of your controller.
For more information, contact
your installer/integrator:
Installer/integrator: attach your
business card or business
sticker here.
NOTICE: Nevo, NevoStudio, NevoQ50, NevoStudio Pro and NevoConnect are registered
trademarks or trademarks of Universal Electronics Inc., in the United States and/or other
countries. Other product and company names may be trademarks of their respective
companies.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet or a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help
Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that
may cause undesired operation.
This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be
used with this equipment. Operation with non-approved equipment or unshielded cables is likely
to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of the manufacturer could void the user’s
authority to operate this equipment.
FCC ID: MG362400
IC ID: 2575A-URC6240
Copyright © 2007 Universal Electronics Inc
All rights reserved.
Document version NQ50QGP101007
Corporate Headquarters
Universal Electronics
6101 Gateway Drive
Cypress, CA 90630-4841
www.uei.com
International Headquarters
Universal Electronics
Institutenweg 21
7521 PH Enschede
The Netherlands
www.uei.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2007:10:02 15:13:58-07:00
Author                          : Stefanie Henke
Modify Date                     : 2007:10:11 17:14:59-07:00
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : NevoQ50 Quick Start Guide.fm
Creator                         : Stefanie Henke
Document ID                     : uuid:db5c9cfb-423b-4078-9913-2b7c7adbf634
Instance ID                     : uuid:766a5231-45db-43f1-9e02-230e20eec77d
Page Count                      : 5
Page Mode                       : UseThumbs

EXIF Metadata provided by EXIF.tools