Universal Scientific PCBAG2345 802.11b Wireless LAN PCMICA Card User Manual I

Universal Scientific Industrial Co., Ltd. 802.11b Wireless LAN PCMICA Card I

UserManual.wiki >

Universal Scientific >

PCBAG2345 User Manual

User Manual

System Product Contract Mfg Business Division Document No. Rev. 1.0Project No. Cost down pc_cardUser Manual for PCBAG-02,03,04,05 PC CARDSOURCE ORGANIZATION: USI COM/PDV/HWPrepared by: Jinfang Date: May, 6, 2003Checked by: Sunmoon Date: May, 6, 2003Approved by: Date: Concurrence: Date:

Universal Scientific Industrial Corp.. Doc No. Rev 1.0Document released by COM/RD/SZ Date. 2003/05/6 Page 2Description User manual for PCBAG-02,03,04,05 PC CARDThe content of this document is to be treated as strictly confidential and is not to be disclosed, reproduced or used, except as authorizedi n writing by Universal Scientific Industrial Co. ,Ltd. Copyright © 2003 Universal Scientific Industrial Co. ,Ltd.Change SheetRev. DateDescription of change Approval & Date1.0 2003/5/6 Page All Initial

Universal Scientific Industrial Corp.. Doc No. Rev 1.0Document released by COM/RD/SZ Date. 2003/05/6 Page 4Description User manual for PCBAG-02,03,04,05 PC CARDThe content of this document is to be treated as strictly confidential and is not to be disclosed, reproduced or used, except as authorizedi n writing by Universal Scientific Industrial Co. ,Ltd. Copyright © 2003 Universal Scientific Industrial Co. ,Ltd.OverviewThis document is for a user who wants to install PCBAG-02~05 PC CARD in Notebook/PCdesk , the user can read the document to configure his wireless PC Card.Software RequirementOS: Windows95,98,2K,NT,XPSoftware Package: Wireless Client Manager Ver:2.125 NDIS Driver Ver: 12/06/2002,7.81.0.308Hardware RequirementPCBAG-02~05 PC CARD.PC running in win95,98,2k,NT,XP .Cardbus controller in PC or PCMCIA interface in Notebook Installationz Install the Client Manager Ver2.125 in your host.z Insert PC Card in to the PC Card slot of host PC (Note: connect PC Card to PC Desk via adapterof pcmcia – cardbus) z Install NDIS Driver 7.81.0.308 based on setup guide .Execute the Configuration ProgramThere are two ways to start the configuration program.z After installation NDIS driver, insert the card into PC host, the program will be executedautomatically, and display a tray icon

Universal Scientific Industrial Corp.. Doc No. Rev 1.0Document released by COM/RD/SZ Date. 2003/05/6 Page 5Description User manual for PCBAG-02,03,04,05 PC CARDThe content of this document is to be treated as strictly confidential and is not to be disclosed, reproduced or used, except as authorizedi n writing by Universal Scientific Industrial Co. ,Ltd. Copyright © 2003 Universal Scientific Industrial Co. ,Ltd.z Start the program in the Start->Programs, click the icon “wireless Client Manager” to run theprogram, after that, popup following dialog in the screen

Universal Scientific Industrial Corp.. Doc No. Rev 1.0Document released by COM/RD/SZ Date. 2003/05/6 Page 8Description User manual for PCBAG-02,03,04,05 PC CARDThe content of this document is to be treated as strictly confidential and is not to be disclosed, reproduced or used, except as authorizedi n writing by Universal Scientific Industrial Co. ,Ltd. Copyright © 2003 Universal Scientific Industrial Co. ,Ltd.To press scan, you can scan the network nameSelect ProfileUse this screen to:

Universal Scientific Industrial Corp.. Doc No. Rev 1.0Document released by COM/RD/SZ Date. 2003/05/6 Page 11Description User manual for PCBAG-02,03,04,05 PC CARDThe content of this document is to be treated as strictly confidential and is not to be disclosed, reproduced or used, except as authorizedi n writing by Universal Scientific Industrial Co. ,Ltd. Copyright © 2003 Universal Scientific Industrial Co. ,Ltd.Basic TroubleShootingPower LED on, Link LED offThis LED status indicates normal operation:• The Wireless Client Adapter is powered on • The Link LED indicates there is no activity on the wireless network. The absence of activity on the Wireless Network Interface might be related to the fact that:• You moved out of Wireless Range of the Base Station(s) that could provide access to theselected network. • There are no Wireless Client Stations in the Wireless Range of your computer to participate inthe selected Peer-to-Peer Group. • The Base Station(s) that could provide access to the selected network has (have) a problem(e.g. power is off).Power LED on, Link LED flickeringThis LED status indicates normal operation:• The Wireless Client Adapter is powered on • The Link LED indicates activity on the wireless network. If the radio of your PCBAG PC Card seems to communicate with other radio devices, but does notsucceed in actually connecting to the network (i.e. the power and radio LED shows normal activity),you may need to verify whether your operating system installed the correct Network ProtocolSettings.Both LEDs blink once every 10 secondsThis LED indicates that the PCBAG PC Card is powered on and working properly, but it is not able toestablish a wireless connection to the wireless network. Possible causes might be:• Your wireless station is outside the Wireless Range of the Base Station(s) that could provide

Universal Scientific Industrial Corp.. Doc No. Rev 1.0Document released by COM/RD/SZ Date. 2003/05/6 Page 13Description User manual for PCBAG-02,03,04,05 PC CARDThe content of this document is to be treated as strictly confidential and is not to be disclosed, reproduced or used, except as authorizedi n writing by Universal Scientific Industrial Co. ,Ltd. Copyright © 2003 Universal Scientific Industrial Co. ,Ltd.• NetBEUI • IPX/SPX To verify your network protocol settings:1. Click Start, select Settings, then select Control Panel. 2. Double-click the Network icon to open the Network properties window. 3. Display the list of network components installed protocols for your wireless network interface.o When using Windows 95/98, scroll down the list of items in the tab Configuration. o When using Windows NT, select the tab Protocols. 4. Contact your network administrator for information about: o Which protocols should be included in the list. o What property settings should apply for each of these protocols. 5. (Optional) Click the: o Add button to add a missing protocol. o Properties button to view/modify the protocol settings. Another Device does no longer workIn case another device does no longer work after you installed the PCBAG PC Card , you may haverun into a Hardware Conflict. You can verify whether this is caused by the wireless network interface,simply by removing the interface and rebooting the computer:• When the problem persists, the problem is not caused by the wireless network interface. • When the other device functions properly again after removing the wireless network interface,one of the following two causes may apply: o The resources were already claimed upon booting the device, by a resource setting in

Universal Scientific Industrial Corp.. Doc No. Rev 1.0Document released by COM/RD/SZ Date. 2003/05/6 Page 14Description User manual for PCBAG-02,03,04,05 PC CARDThe content of this document is to be treated as strictly confidential and is not to be disclosed, reproduced or used, except as authorizedi n writing by Universal Scientific Industrial Co. ,Ltd. Copyright © 2003 Universal Scientific Industrial Co. ,Ltd.the BIOS or CMOS of your computer, or o The driver software of the conflicting device did not notify the Windows NT operatingsystem of its claim upon specific resources. This means that if you selected resources that appeared to be available according to theWindows NT Diagnostics program, these settings were already claimed by theconflicting device. In both cases you are encouraged to try alternative values for your wireless network interface to seewhether these new values might help solving your problem. Upon doing so, you are advised to changeonly one parameter at a time.CAUTION: To maintain compliance with FCC’s RF exposure guidelines, this equipmentshould be installed and operated with minimum distance 20cm between the radiator andyour body. Use on the supplied antenna. Unauthorized antenna, modification, orThis device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that mayFCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 

Universal Scientific Industrial Corp.. Doc No. Rev 1.0Document released by COM/RD/SZ Date. 2003/05/6 Page 15Description User manual for PCBAG-02,03,04,05 PC CARDThe content of this document is to be treated as strictly confidential and is not to be disclosed, reproduced or used, except as authorizedi n writing by Universal Scientific Industrial Co. ,Ltd. Copyright © 2003 Universal Scientific Industrial Co. ,Ltd.Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no changeto the antenna or the device is permitted. Any change to the antenna or thedevice could result in the device exceeding the RF exposure requirements andvoid user’s authority to operate the device.FCC INFORMATIONThe Federal Communication Commission Radio Frequency InterferenceStatement includes the following paragraph:The equipment has been tested and found to comply with the limits for a ClassB Digital Device, pursuant to part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instruction, may causeharmful interference to radio communication. However, there is no grantee thatinterference will not occur in a particular installation. If this equipment dose causeharmful interference to radio or television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following measures:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.--Consult the dealer or an experienced radio/TV technician for help.The user should not modify or change this equipment without written approval form U n i v e r s a lScientific Industrial Co., Ltd. .Modification could void authority to use thisequipment.

Universal Scientific Industrial Corp.. Doc No. Rev 1.0Document released by COM/RD/SZ Date. 2003/05/6 Page 16Description User manual for PCBAG-02,03,04,05 PC CARDThe content of this document is to be treated as strictly confidential and is not to be disclosed, reproduced or used, except as authorizedi n writing by Universal Scientific Industrial Co. ,Ltd. Copyright © 2003 Universal Scientific Industrial Co. ,Ltd.Technical SupportTechnical Contact :Universal Scientific Industrial Co., Ltd. ( Headquarters )Address : 135, Lane 351, Taiping Rd., Sec. 1, Tsao Tuen, Nan Tou, TaiwanUSI Taipei Office : 10F, 420, Keelung Road, Sec. 1, Taipei, TaiwanContact Person : Ray HuangTelephone : +886-2-2345-5006, Ext.119Fax : +886-2-2345-5191Email : rayhwang@ms.usi.com.twTechnical Contact in the US :Address : 685A Jarvis Drive, Morgan Hill, CA 95037, USATelephone : +1-408-776-1966Fax : +1-408-778-5509Website : www.usi.com.tw

Navigation menu