Universal Scientific UNA900 WWAN Module User Manual User Guide UNA900 v1 1 20120417

Download:
Mirror Download [FCC.gov]
Document ID	1680202
Application ID	/0A+DdlixfPDvwJyufVlVA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	308.02kB (3850208 bits)
Date Submitted	2012-04-20 00:00:00
Date Available	2012-10-17 00:00:00
Creation Date	2012-04-17 14:52:39
Producing Software	GPL Ghostscript 9.02
Document Lastmod	2012-04-17 14:52:39
Document Title	User_Guide_UNA900_v1.1_20120417
Document Creator	PDFCreator Version 1.2.2
Document Author:	Admin

User Guide for UNA Module & Socket EVB
USI P/N
Department
Date
Version
8500-002990-00
MP
2012/04/16
V1.1
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
Content
1.
FCC Regulations..................................................................................................1
2.
RF Exposure Information ..................................................................................2
3.
Information of Installed Module.......................................................................3
4.
Guide to Use .........................................................................................................4
1) Function of Socket EVB V21 ..........................................................................4
2) Configure the Socket EVB ..............................................................................6
3) Insert the SIM card ............................................................................................8
4) Place the Module ...............................................................................................9
5) Connect the antenna ......................................................................................10
6) Download setting.............................................................................................11
7) Manual control module model .....................................................................12
8) Rework list for PCM Codec...........................................................................13
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
1. FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiated
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
2. RF Exposure Information
This Modular Approval is limited to OEM installation for mobile and fixed
applications only. The antenna installation and operating configurations of this
transmitter, including any applicable source-based time-averaging duty factor,
antenna gain and cable loss must satisfy MPE categorical Exclusion
Requirements of §2.1091.
The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons, must not be collocated
or operating in conjunction with any other antenna or transmitter, except in
accordance with FCC multi-transmitter product procedures.
The end user has no manual instructions to remove or install the device and a
separate approval is required for all other operating configurations, including
portable configurations with respect to 2.1093 and different antenna
configurations.
Maximum antenna gain allowed for use with this device is 2 dBi.
When the module is installed in the host device, the FCC ID label must be
visible through a window on the final device or it must be visible when an
access panel, door or cover is easily re-moved. If not, a second label must be
placed on the outside of the final device that contains the following text:
“Contains FCC ID: IXM-UNA900”.
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
3. Information of Installed Module
Module Name
UNA_900
FCC ID
IXM-UNA900
HW Version
V2.1
SW Version
MAUI.11A.W11.12.MP.V67.F1
GSM Band
GSM 850, E-GSM 900, DCS 1800, PCS 1900
UMTS Band
FDD I, FDD VIII
GSM Feature
Release 99
GPRS
Release 6, Multi-slot class 12
EDGE
Release 6, Multi-slot class 12
UMTS Feature
HSDPA, HSUPA (UMTS Release 6)
AT Command
3GPP TS 27.007, 27.005
SIM/USIM
Support 3V and 1.8V
Interface
USB 2.0 high speed
Operating Temperature
Frequency
Stability
covers
temperature range of -20° to +50°C
Operating Voltage
3.5 ~ 4.2V
operating
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
4. Guide to Use
1) Function of Socket EVB V21
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
Function
Description
Available
USB PORT
Connect to Host PC
Power supply IN
Optional Connect to external Power supply input
UART1
Download Firmware
RF SMA connector
Connect to external Antenna
Connector for Debug
Connector for Debug
Module on/off
Switch for module on/off
SIM card
Connect to SIM card
JTAG
Connect to JTAG Debug tool
MICK IN
Connect to MIC
SPK OUT
Connect to Line out
J51
MP test connector
J52
MP test connector
Unavailable
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
2) Configure the Socket EVB
Default JUMP Setting :
Component reference
Function
Jump 1-2
J40
(Default) Enable VBAT_M1
Yes
J41
(Default) Enable POSCAP in Circuit on VBAT_M1
Yes
Component reference
J42
Function
Jump 1-2
(Default) Output +3.3V for module
Jump 3-4
Yes
Output +4.2V for module
a. Required : Select either J42 Jump1-2 or Jump 3-4
Component reference
J45
Function
PWRKEY low level input to turn on Module
Jump 4-3
Yes
Download Key :
Component reference
J31
Function
Enable Download through USB
Jump 1-2
Yes
a. Follow software download user guide
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
Jump setting reference:
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
3) Insert the SIM card
To use a UNA module, you need to install:
a. A live SIM card (with an active account), or
b. A test SIM card for use with call box (for example ,an Agilent 8960 ..)
To install the SIM card:
a. Place the Socket EVB face-up(as shown) – the SIM slot is on right side.
b. Note the location of the notched corner of the card in the following image.
b. Inset the SIM card into the slot.
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
4) Place the Module
After inserting the SIM card, insert the module:
a. Place the Socket EVB face-up(as shown) – the socket is in the center.
b. Notice the pin 1 location on the socket.
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
5) Connect the antenna
After installing the Module ,connect the supplied antenna to the EVB
a. Place the Socket EVB face-up. The antenna connector on the bottom side.
b. Connect the antenna to the adapter.
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
6) Download setting
a. Connect the USB cable between EVB & PC.
b. Connect the RS232 cable between EVB UART & PC.
c. Plug in the Jump.
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
7) Manual control module model
Component reference
Function
J45-4
PWRKEY input to turn on Module
J45-2
USB_EN control pin to turn on Module
Jump 4-3
a. Follow UNA IO application design notes
b. Switch Module on/off (SW3) from left side to right side to off auto control before use
manual control.
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.
8) Rework list for PCM Codec
a. Place 0R on R148 & R149 on bottom side.
b. Take off R18,R16 ,Q63,Q62 as red block . Place 0R on R155,R142 as black block.
The information contained herein is the exclusive property of Universal Scientific Industrial Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of USI Co., Ltd.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 15
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : 93bd3a18-8ab5-11e1-0000-3283b5169cfa
Producer                        : GPL Ghostscript 9.02
Keywords                        : ()
Modify Date                     : 2012:04:17 14:52:39+08:00
Create Date                     : 2012:04:17 14:52:39+08:00
Creator Tool                    : PDFCreator Version 1.2.2
Document ID                     : 93bd3a18-8ab5-11e1-0000-3283b5169cfa
Format                          : application/pdf
Title                           : User_Guide_UNA900_v1.1_20120417
Creator                         : Admin
Description                     : ()
Author                          : Admin
Subject                         : 

EXIF Metadata provided by EXIF.tools