Untethered Labs GATEKEEPER Gatekeeper 3.0 -key User Manual GateKeeper print PG1

Untethered Labs, LLC Gatekeeper 3.0 -key GateKeeper print PG1

User Manual

Download: Untethered Labs GATEKEEPER Gatekeeper 3.0 -key User Manual GateKeeper print PG1
Mirror Download [FCC.gov]Untethered Labs GATEKEEPER Gatekeeper 3.0 -key User Manual GateKeeper print PG1
Document ID3818714
Application IDx8Q8+3xvdJqymFa8wcOkng==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize394.94kB (4936731 bits)
Date Submitted2018-04-17 00:00:00
Date Available2018-04-17 00:00:00
Creation Date2018-03-15 17:41:01
Producing SoftwareAdobe Acrobat Pro 9.3.4
Document Lastmod2018-04-13 14:29:53
Document TitleGateKeeper_print_PG1
Document CreatorAdobe Acrobat Pro 9.3.4
Document Author: Sivash Persaud

Q. At what distance does the GateKeeper typically lock and unlock the computer?
The operating distance is 3 - 30 feet in the typical office environment. The range can be
adjusted in the software to meet your specific needs.
Q. What happens after the battery runs out?
You can replace the battery by opening the back of the GateKeeper. It is a standard coin
cell CR2450 battery that can be found in any store.
Q. Can I use my computer’s Bluetooth with the Halberd?
Yes. For certain Win 10 computers, you may be able to use the internal Bluetooth.
However, the best performance is guaranteed with the USB dongle included here.
Q. What does the red light on the GateKeeper mean?
A blinking red light means that the battery is running low and should be r eplaced.
Important Safety Instructions
Do not drop, place, or submerge product in water or any other liquid.
Use this unit only as intended in this manual.
Do not operate the unit if damaged.
Do not attempt to disassemble or repair the unit.
Changes or modifications to the product are not authorized by Untethered Labs, Inc.
For answers to other questions related to support,
partnerships or bulk purchasing, please contact us at
w w w. g kac c ess. c o m
The GateKeeper is a Lock and Key system for your computer. Using the GateKeeper
device, the user can automatically lock or unlock their computer based on proximity.
Simply walk away to lock your computer.
Walk back to unlock it.
GateKeeper Enterprise
software can be used to
manage all GateKeepers
Slide off the
battery cover
Download the latest version:
Install battery, “+” side
Close the back
on a company-wide
- Admin Console
Automatically lock your
Automatically unlock
computer when you walk
your computer by simply
away. 100% security at
walking up to it.
Run the software then follow the
on-screen prompts to install.
all times.
Use GateKeeper Server
Use a PIN along with the
Application to manage all
GateKeeper to log on using
GateKeeper activity on
2-Factor Authentication.
your network.
- Plug USB lock into the
- Click on "Pair Key" in the
- Place GateKeeper key on
top of the USB lock, then
follow the prompts.
- Multiple users per computer
- Audit Logs
Email us at
to get started with
GateKeeper Enterprise.
Helpful tips
For best performance, please keep the Key AND Lock in clear line of sight.
Make sure that there are no obstructions between the Key and Lock.
Use your Android or iOS phone in addition
We recommend placing the USB Lock on the most visible and straight-line path
to where you usually keep your GateKeeper Key.
to the Halberd for authenticating on
to your computer.
Contact us at info@gkaccess.com
to get priority access.
User Manual
The user manual with detailed instructions for installing and operating the GateKeeper
software, GateKeeper apps, and the GateKeeper hardware can be found at
GateKeeper Halberd
Low Battery Indicator
Size: 61 mm x 30 mm x 10 mm
Size: 18 mm x 15 mm x 6 mm
Windows 7, 8, 8.1, and 10
Android 4.3 or higher
USB Lock
Battery Cover
Expected battery life: 3 to 6
Compatible with USB 2.0 and
Mac OS X
iOS 7 or higher
CR2450 Battery
USB 3.0
Range: Up to 30 feet
Bluetooth 4.0 enabled
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : Sivash Persaud
Create Date                     : 2018:03:15 17:41:01+08:00
Modify Date                     : 2018:04:13 14:29:53+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2018:04:13 14:29:53+08:00
Creator Tool                    : Adobe Acrobat Pro 9.3.4
Format                          : application/pdf
Title                           : GateKeeper_print_PG1
Creator                         : Sivash Persaud
Document ID                     : uuid:2799fd65-e14f-40e4-bf29-19057474b110
Instance ID                     : uuid:1573af39-3e7b-4b6c-95a6-61936b5c32d5
Producer                        : Adobe Acrobat Pro 9.3.4
Page Count                      : 3
For                             : Siddharth Potbhare,
Bounding Box                    : 1 -1 650 432
Container Version               : 11
Creator Version                 : 20
EXIF Metadata provided by EXIF.tools

Navigation menu