Usafe UBHS-H5 Amazon Basics Bluetooth Stereo Headset with Microphone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2024494
Application ID	+2byZF7EzWMsGlEDRxWplw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.54kB (256717 bits)
Date Submitted	2013-07-24 00:00:00
Date Available	2014-01-20 00:00:00
Creation Date	2017-10-26 13:10:11
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-26 13:10:11
Document Title	Microsoft PowerPoint - Manual_rtte [호환 모드]
Document Creator	PScript5.dll Version 5.2.2
Document Author:	BDC5C1BEB8ED

Quick Setup Guide
UBHS-H5
Quick Setup Guide
UBHS-H5
Features
Power ON / OFF,
Talk
Volume Up / Down
Play / Pause,
EQ-Mode
Built-In
Microphone
Next / Previous
Quick Setup Guide
UBHS-H5
Power ON/OFF
▮ Press and hold Power/Talk button for 2 seconds to switch
the headset on or off.
▮ Power ON/OFF voice prompt is Hello / Bye .
Pairing and Connection
▮ While the headset is off, press and hold Talk for 4 seconds
to start pairing mode.
▮ Once the headset is in pairing mode, select UBHS-H5
among discovered Bluetooth devices on the phone.
When being connected , voice prompt is Connected .
Using EQ effect
Note: 2 types of EQ effect are programmed in the order below.
▮ While in Play / Pause mode
mode, long click the ▶■ button to
select the EQ effect of your choice.
1. Normal - No EQ effect is applied.
2. Bass - enhances low-frequency sound to provide rich and
deep
p bass tones.
3. Live - Delivers natural and soft sound field effect simulating
that of a live performance.
Quick Setup Guide
UBHS-H5
Easy pairing
▮ UBHS-H5 supports easy pairing . When pairing , there is
no need to enter the 0000 .
※ Host device also has to support easy pairing.
Connecting the Headset
▮ Connecting from the phone: Among registered Bluetooth
devices on the phone, select UBHS-H5 .
▮ Connecting from the headset: Through auto-connect
function, the headset automatically connects to the last
device it was connected to when powered on.
Resetting the Headset
▮ In case the headset needs to be reset, press Play , Talk
and Volume Up buttons together simultaneously.
Quick Setup Guide
UBHS-H5
Multi Point
▮ Multi-point enables your headset to maintain an active
connection with two mobile phones. This means your headset is
ready when you want to make or take calls from either your
personal or your work phone
phone.
▮ Before setting up multi-point mode, at least one other Bluetooth
enabled device should be stored in the headset's pairing list.
▮ The headset will recognize the Bluetooth devices based on
priority. By default, the first paired Bluetooth device will be the first
priority device and the other Bluetooth device will be second
priority.
Quick Setup Guide
UBHS-H5
Listening to music
To:
Play/Pause
Select a song
Answer a call while playing
music
Change the volume
Do this:
1. Press ▶■ button to launch the phone s MP3 player and
to start listening to music.
2. While MP3 player is in use, press ▶■ button to pause or
to resume play.
p y
3. Double Click ▶■ button to end music playback.
While MP3 player is in use, press ◀◀ or ▶▶ buttons to
select songs.
1. When receiving a call, press Talk button to answer the
call.
2. Press Talk button while on the phone to end the call
3. When receiving a call, press ▶■ button to reject the call.
- Music will resume playing when the call is rejected
rejected.
Use + / - buttons to adjust the volume level.
Making phone call
To:
Do this:
Voice dial
Press the Talk button once to activate voice dial.
Redial
Double click Talk button to redial last number.
Answer a call
End a call
When receiving a call, press Talk button to answer the
call.
While talking on the phone, press Talk button to end
the call.
Refuse a call
While receiving a call, press Play/Pause button to
refuse the call.
Change the volume
Use + / - buttons to adjust the volume level.
Transfer a call between
connected devices
During a phone conversation, press Talk button twice
to switch the call
between the headset and the phone.
Quick Setup Guide
UBHS-H5
Supports battery status notification at smart phone
▮ iOS
Battery Meter
Quick Setup Guide
UBHS-H5
How to pairing the UBHS-H5
▮ Computer running Windows 7 :
Note: Before you pair the headset with the computer, make sure the computer is equipped
with a Bluetooth radio. Refer to the computer s documentation or contact the computer
manufacturer
f t
for
f more information.
i f
ti
If you do
d nott have
a Bluetooth
Bl t th radio,
di install
i t ll a Bluetooth
Bl t th
USB adapter (dongle).
1 Turn on Bluetooth on the computer. For instructions, see the
computer s documentation or contact the computer manufacturer.
2 Double-click the Bluetooth icon in the system tray, near the clock.
3 Click Add a device.
4 With the headset turned off, press and hold Talk for six seconds. The
LED blinks blue and red rapidly and pairing mode is activated.
5 Double-click the UBHS-H5 icon on the computer or highlight the icon
and click Next.
6 Click Close after the headset has been paired.
Note:
t T
To use the
th headset,
h d t it mustt be
b selected
l t d as default
d f lt recording
di and
d playback
l b kd
device
i on
the computer.
7 Click Start, then click Control Panel.
8 Click Hardware and Sound, then under Sound, click Manage audio
devices.
9 On the Recording
g tab,, select Headset Microphone
Bluetooth Handsfree Audio, then click Set Default.
10 On the Playback tab, select Headset Bluetooth Hands-free Audio,
then click Set Default.
11 Click OK.
Quick Setup Guide
UBHS-H5
How to pairing the UBHS-H5
▮ Computer running Windows Vista :
Note: Before you pair the headset with the computer, make sure the computer is equipped
with a Bluetooth radio. Refer to the computer s documentation or contact the computer
manufacturer for more information.
information If you do not have a Bluetooth radio,
radio install a Bluetooth
USB adapter (dongle).
1 Turn on Bluetooth on the computer. For instructions, see the
computer s documentation or contact the computer manufacturer.
2 Double-click the Bluetooth icon in the system tray, near the clock.
3 Click Add Wireless Device.
4 With the headset turned off, press and hold Talk for six seconds. The
LED blinks blue and red rapidly and pairing mode is activated.
5 Double-click the UBHS-H5 icon on the computer or highlight the icon
and click Next.
6 Click Close after the headset has been paired.
Note: The headset should be automatically selected as the default playback device.
device If the
headset is not the default playback device, complete Steps 7 through 9.
7 Click Start, then click Control Panel.
8 Click Hardware and Sound, then under Sound, click Manage audio
device.
9 On the Playback tab, select Headset 2-Bluetooth Hands-free Audio,
then click Set Default.
10 On the Recording tab, select Headset Microphone 2-Bluetooth
Hands-free Audio, then click Set Default.
11 Click OK.
Quick Setup Guide
UBHS-H5
How to pairing the UBHS-H5
▮ Computer
running Windows XP :
Note: Before you pair the headset with the computer, make sure the computer is equipped
with a Bluetooth radio. Refer to the computer s documentation or contact the computer
manufacturer for more information. If you do not have a Bluetooth radio, install a Bluetooth
USB adapter (dongle).
1 Turn on Bluetooth on the computer. For instructions, see the computer s
documentation or contact the computer manufacturer.
2 Double-click the Bluetooth icon in the system tray, near the clock. My Bluetooth
Places opens.
3 Click Add a New Bluetooth Device. The Add Bluetooth Device Wizard opens.
4 Click Next.
5 With the headset turned off, press and hold Talk for six seconds. The LED blinks
blue and red rapidly and pairing mode is activated.
6 Double-click the UBHS-H5 icon on the computer or highlight the icon and click
Next.
Note: If you are unable to locate the UBHS-H5 icon, click the Search Again button.
7 Select one of the Bluetooth hands-free types shown on the Add a Bluetooth
Device Wizard screen, and click Next.
8 Select the services shown on the wizard screen to use with your Bluetooth
headset, then click Finish.
9 To connect the device, double-click the MAB2 Hands-Free Unit icon or the
UBHS-H5 Stereo Audio icon.
Note: To use the headset, it must be selected as the default recording and playback
device on the computer.
10 Click Start, then click Control Panel.
11 Click Sounds, Speech, and Audio Devices.
12 Click the Sounds and Audio Devices icon.
13 On the Audio tab, select Bluetooth Hands-free Audio or Bluetooth Stereo Audio
in the Sound recording list, and select Bluetooth Hands-free Audio in the Sound
playback list, if it is an option.
Quick Setup Guide
UBHS-H5
How to pairing the UBHS-H5
▮ Mac computer :
Note: Before you pair the headset with the computer, make sure the computer is equipped
with a Bluetooth radio. Refer to the computer s documentation or contact the computer
manufacturer for more information.
information If you do not have a Bluetooth radio,
radio install a Bluetooth
USB adapter (dongle).
1 Turn on Bluetooth on the computer. For instructions, see the
computer s documentation or contact the computer manufacturer.
2 Click the Bluetooth status menu.
3 Click Set up Bluetooth Device. The Bluetooth Setup Assistant opens.
4 Click Continue.
5 Select Headset as the device type, then click Continue.
6 With the headset turned off, press and hold Talk for six seconds. The
LED blinks blue and red rapidly and pairing mode is activated.
7 Select UBHS-H5, then click Continue. The computer gathers
information.
8 Click
Continue.
9 Click Quit when finished.
Note: To use the headset, it must be selected as the default input and output device on
the computer.
10 Click System Preferences, then click Sound.
11 Under Input, select UBHS-H5, then under Output, select
Quick Setup Guide
UBHS-H5
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
con-nected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
Modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC Compliance Information : This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation
Quick Setup Guide
UBHS-H5
IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20 centimeters between the radiator and your body.This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
“This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.”
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Quick Setup Guide
UBHS-H5
LED light messages
Headset Status
LED Status
Power on
Blue LED flashes
Turning off
Recharging
Red LED dims and disappears
Red LED blinks every 5 seconds on
connection state
Red LED stays on
Recharging complete
Blue LED stays on
Pairing mode
Blue and Red LEDs flash in rotation
Connection complete
Blue LED blinks every 5 seconds
Receiving a call
Blue LED blinks every 0
0.5
5 seconds
Talking on the phone
Blue LED blinks every 1 seconds
Low battery
Specification
Headset Status
Bluetooth Version
Frequency Spectrum
Working Distance
Operating Temperature
V3.0
HFP v1.6(HD), HSP v1.2, A2DP v1.2,
AVRCP v1.4
2.4 ~ 2.4835 GHz ISM Band
Up to 10m
14~140°F (-10 ~ +60℃)
Operating Time
Talk 20 hours / Music 15 hours
Standby Time
500 hours
Product Size
5.5(L) x 5.1(W) x 2.4(H) inches
Product weight
2.0 oz ( 57 g )
Average charging time
2 Hours
Supported Profiles
※Note 1 : Battery life varies by volume level and audio content.
2 : The specification is subject to change with the product version.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : 
Create Date                     : 2013:07:19 19:51:59+09:00
Modify Date                     : 2013:07:19 21:04:46+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : 
Title                           : Microsoft PowerPoint - Manual_rtte [호환 모드]
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:07:19 21:04:46+09:00
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Document ID                     : uuid:34c3c641-f4c7-4273-ad8f-657071dc2ed3
Instance ID                     : uuid:15ab7047-0c56-4616-82d6-3d8fa14c0fd5
Page Count                      : 14

EXIF Metadata provided by EXIF.tools