Usafe UBHS-PH1 BLUETOOTH STEREO HEADSET User Manual Microsoft PowerPoint PH1 v 0 2
Usafe Co.,Ltd BLUETOOTH STEREO HEADSET Microsoft PowerPoint PH1 v 0 2
Usafe >
USERS MANUAL
UBHS-PH1 User Manual Caution 1. Do not put the headset near a fire to avoid danger of explosion. 2. Do not drop or apply excessive force to the headset. It may cause damage. 3. In case of malfunction, do not attempt to repair. Please contact the nearest service center or the place of purchase immediately. 4. If the headset gets wet, avoid any heat or electrical current, and contact the nearest service center or the place of purchase immediately. 5. Keep out of children’s reach. 6. Do not use chemical products (example: Bleach) to clean the product. 7. Do not use any unauthorized charging device. 8. When storing the product for an extended period of time, store in a dry place and avoid extreme temperatures. 9. In order to avoid any danger caused by radio interference, do not use the headset where its use is forbidden. 10. Your battery and the mobile device may require recycling in accordance with the local laws. Please contact your local authorities for more information. 11. Do not discard your battery or mobile device in the trash. 12. If you use any medical device (pacemaker, hearing aids etc…), please consult your medical device manufacturer to make sure that the correct functioning of your medical device is not affected by RF energy emitted by the Bluetooth Headset. Your doctor may be able to assist you in obtaining this information. 13. Our product satisfies Bluetooth Core Specification Version 2.0+EDR. Some Bluetooth devices may not be compatible with the headset. For further information about compatibility, please contact the concerned manufacturer, or our customer service center. 14. Using the headset at full volume may damage your hearing. 15. Strong static electricity may damage the product. Please use your caution when operating the headset. 16. Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 17. In case of malfunction due to electrostatic discharge just reset the product (ON/OFF of power button may be required) to resume normal operation. Company’s Indemnification 1. Manufacturers, retailers, agencies are not responsible for any bodily harm, intentional damages and damages caused by the user’s lack of care. 2. This user manual was written based on present product specification. 3. All specification may be modified without prior notice. Features Microphone 3.5mm Audio Jack USB Port Backward Volume up Talk Button Forward Volume down Play/Pause Power On/Off Press and hold button for 3 seconds to switch the headset on or off. While the headset is off, press and hold for 5 seconds to start pairing mode. Connecting the Headset Connecting from the phone: Among registered Bluetooth devices on the phone, select ‘Lubix PH1’. Connecting from the headset: Through auto-connect function, the headset automatically connects to the last device it was connected to when powered on. Making Phone Calls Make a new call: Enter desired number on the phone and double click headset to start a new call. Last Number Redial: Double click button on the button to redial last number. Answer a call: When receiving a call, press Ending a call: While talking on the phone, press button to answer the call. button to end the call. Volume Control: Use ‘+’ / ’-’ buttons to adjust the volume level. Listening to Music Play/Pause 1. Press ‘▶■’ button to launch the phone’s MP3 player and to start listening to music. 2. While MP3 player is in use, press ‘▶■’ button to pause or to resume play. 3. Press and hold ‘▶■’ button to end music playback. Song Selection While MP3 player is in use, press ‘◀◀’ or ‘▶▶’ buttons to select songs. Rewind/Forward While music is playing, press and hold ‘◀◀’ or ‘▶▶’ buttons to rewind or forward the song. Answering Call While Listening to Music 1. When receiving a call, press button to answer the call. 2. Press button while on the phone to end the call 3. When receiving a call, press ▶■ button to reject the call. - Music will resume playing when the call is rejected. Volume Control Use ‘+’ / ’-’ buttons to adjust the volume level. 3D Sound Using 3D Sound 5 types of 3D sound effect are programmed in the order below. While in Play/Pause mode, press the button to select the 3D sound effect of your choice. Types of 3D Sound Effect 1. Normal: No 3D sound effect is applied. ※ Two beeping sound will indicate that the headset is in Normal mode. 2. Provides comfortable and persistent listening environment by taking distractible sound away from ears and head when using earphones. 3. Delivers natural and soft 3D sound field effect simulating that of a live performance. 4. Widely spread main vocal and center-placed instruments by providing a panoramic 3D audio image. 5. Not only delivers wide stereo sound image, but also enhances low-frequency sound to provide rich and deep bass tones. Headset Specification Bluetooth Version: Version 2.0 + EDR Supported Profiles: A2DP, AVRCP, HFP, HSP Frequency Spectrum: 2.4~2.4835GHz Working Distance: 10m Operating Temperature: -20 ~ 50°C Operating Time: Talk 6 hours / Music 5 hours Standby Time: 100 hours Product Size: 59(L) x 25(W) x 11(H) mm Product weight: 12g (Pendant only) FCC Compliance Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received. Including interference that may cause undesired operation. Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio Frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 5 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:6c35fde0-74ad-4298-9a49-39ed2f63555c Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2007:07:30 14:43:31+09:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2007:08:08 18:14:40+09:00 Metadata Date : 2007:08:08 18:14:40+09:00 Document ID : uuid:e32ac3d1-1e81-4be0-96c8-9cd8b21eaed6 Instance ID : uuid:241c1265-1af8-4902-81e0-81388b8a50e8 Format : application/pdf Title : Microsoft PowerPoint - PH1 user manual v.0.2.ppt Creator :EXIF Metadata provided by EXIF.toolsAuthor :