VELUX America 833429 Remote Control User Manual 1

VELUX America Inc. Remote Control 1

Contents

User manual 1

Download: VELUX America 833429 Remote Control User Manual 1
Mirror Download [FCC.gov]VELUX America 833429 Remote Control User Manual 1
Document ID1220889
Application IDoWgp14Ov0R7Zup6H13O/QA==
Document DescriptionUser manual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize219.8kB (2747472 bits)
Date Submitted2009-12-30 00:00:00
Date Available2009-12-30 00:00:00
Creation Date2009-12-10 12:43:31
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2009-12-10 12:43:37
Document TitleUser manual 1
Document CreatorAdobe InDesign CS4 (6.0.4)

VSE/VCE
KLR 100
ENGLISH: User manual
ESPAÑOL: Manual del usuario
FRANÇAIS : Notice d'utilisation
VAS 452169-2009-12
English
User manual
Español
Manual del usuario
Français
Notice d'utilisation
2 VELUX
4-73
74-143
144-212
VELUX 3
Contents
Congratulations on your new VELUX product
In order to make the best use of your product please read these instructions on
operation and maintenance.
Important information / Warnings
6-7
44-45
46
45
46-47
48
49
50
Extending the system
Getting started
Initial set-up
Remote control functions
8-9
10-11
Operation
Locating and operating a product
- One skylight
- More than one skylight
Closing the skylight automatically
Choosing positions
Disabling rain sensor
12-14
12
13-14
15
16
17
Menu functions
Menu guide
Navigating through the menus
Changing language
Room, Group and Zone
- Creating a Room
- Editing a Room
- Creating a Group
Naming
Programs
- My program
- Program under Shortcut P1/P2
Time and date
Keypad lock
4 VELUX
Display
- Display light
- Sleep mode
Rearranging order
Access code
Software version
Clearing remote control settings
ENGLISH
18
19
20
21
22-23
24-25
26-27
28-29
30-41
31-35
36-41
42
43
Registering new products
Using additional activation controls
- Copying to a new remote control
- Copying to a remote control in operation		
Security key
52-53
54-59
56-57
58-59
60-61
Resetting
Resetting and preparing for registration
Resetting the remote control
Adjusting the opening
62
63
64-65
Fitting of holder for remote control
66-67
Use and maintenance
Power failure / Mislaid remote control
Maintenance
68
69
Further information
Display symbols
Display texts
Glossary
70
71
72
ENGLISH
VELUX 5
Important information / Warnings
Please keep instructions for future reference and hand them over to any new
user.
Safety
• Before operating ensure that the skylight with electrical products can be
and is operated without risk of damage to property or injury to people or
animals.
• For personnel safety never have head, hand, arm or any other body part out
of or through the opening of the skylight without first having switched off
main power supply.
• Children must not be allowed to play with the skylight and its electrical
products. The remote control should be kept out of reach of children. Do not
allow children near an open skylight.
• If repair or adjustment work is needed, disconnect from main power supply
and ensure that it cannot be reconnected unintentionally.
• The main power supply cable is for indoor use only.
• It is recommended that a remote control be placed in the room where the
skylight and its electrical products have been installed.
• If the skylight is positioned within reach, the opening of the skylight operator must be adjusted to reduce the maximum size of the opening (see section
Adjusting the opening). Failure to make such adjustment can result in serious
injury or death.
• Make sure that the insect screen is installed before putting the skylight into use.
Function
• If the rain sensor gets wet, the skylight automatically closes.
• Disabling the rain sensor while the skylight is open creates a risk of water to
the interior of the building.
• To prevent the skylight from closing because of very fine/weak rain, fog or
dew, the rain sensor is equipped with a heating element to keep the surface
dry.
• If the rain sensor is activated, the skylight will close within approximately
30 seconds. If the skylight is activated with the remote control or another
activation control, it will take up to one minute until the skylight is completely closed. Therefore, in case of sudden rain, water may enter the room
before the skylight is closed.
• In case of snow and/or ice, the operation of the skylight may be blocked
resulting in damage to the skylight.
6 VELUX
ENGLISH
Product
• This product has been designed for use with genuine VELUX products.
Connection to or use with other products may cause damage, malfunction
or injury.
• Electrical products must be disposed of in conformity with all local codes,
ordinances, rules and regulations for electronic waste and not with household waste.
• Used remote control batteries have to be disposed of in conformity with the
relevant environmental regulations and ordinances.
• Expected lifetime of the remote control battery: Approx 1 year.
• The packaging can be disposed of with usual household waste.
• Radio frequency band: 2.4 GHz.
• Radio frequency range: 110 yards (100 m) free field. Depending on building
construction, the indoor range is approx 30 ft (10 m). However, constructions with reinforced concrete, metal ceilings and plaster walls with steel
members may reduce the range.
Maintenance and service
• Disconnect from main power supply before carrying out any maintenance,
repair, adjustment or service work to the skylight or products connected to it
and ensure that it cannot be reconnected unintentionally during this time.
• Maintenance and installation must be carried out in consideration to Health
and Safety at work requirements.
• If main power supply cable is damaged, it must be replaced by a qualified
electrical installer in accordance with all local codes, ordinances, rules and
regulations.
• Spare parts are available through VELUX. Please provide information from
the data plate.
• If you have any technical questions, please contact VELUX.
FCC ID: XSG833429 and IC ID: 8642A-863765: Remote control
FCC ID: XSG863765 and IC ID: 8642A-863765: Skylight operator
This device complies with part 15 of the FCC and RSS-210 of the IC rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
ENGLISH
VELUX 7
Initial set-up
Auto set-up
 roducts to be operated with the remote control must be
registered in the remote control. Registration, however,
depends on whether the remote control is new or whether
it is already used for operating other products.
Prepare products
for registration and
press Register
within 10 minutes
Register
"Register" to start registration.
P1
P2
Auto set-up
• If the remote control is already in operation, proceed
with section Registering new products.
• If the remote control is new, proceed as follows.
 hen the initial set-up has been completed, the registered
products will appear in the display.
Press
Info
Registration is running. This can take up to two minutes.
 he display shows "Completed" when all products have
been registered.
Note: If the display shows "Failed", remove the batteries
from the remote control. Prepare the products for registration, see section Resetting and preparing for registration.
Repeat the initial set-up.
 lide off the battery cover of remote control as shown.
Insert the three batteries supplied (type AA, 1.5 volt).
Replace cover.
Auto set-up
Completed
House
No. 1
Window
language

Choose
language:
to highlight your language.
Press
Press
"Enter" to confirm your choice.
 repare products for registration.
Disconnect the main power supply to the products for
1 minute and then reconnect it. The products can now be
registered in the remote control within the next 10 minutes.
8 VELUX
ENGLISH
Eesti
English
Español
Français
 he display shows one of the registered products.
to see the other registered products.
Press
Menu
Locate
P1
P2
Enter
P1
P2
 or use of more than one remote control, all products must
be registered in one of the remote controls, see above.
Then the information must be copied from this remote
control to the other remote controls, see section Using
additional activation controls.
 ote: The opening of the skylight operator must be
adjusted if your skylight is positioned within reach, see
section Adjusting the opening.
ENGLISH
VELUX 9
Remote control functions
House
No. 1
Window
The display indicates which product is being operated, which menu function is being used etc. The
top line of the display states the chosen area. Products are as default shown under the area House.
The bottom line of the display states the function
of the two selection keys.
Note: The display shows the last product operated.
The word "Window" is used for both windows and
skylights.
Selection, navigation and program keys
Selection keys
- for activating the menu and confirming the chosen
menu function.
- for locating the Room, the Group, the Zone or the product to be operated.
House
No. 1
Window
Menu
Locate
Menu
Locate
P1
P2
P1
P2
P1
P2
P1
P2
The current function of the individual selection key is
stated directly above in the display.
Navigation keys
- for scrolling up and down in the product or menu list.
- for scrolling through the time intervals to set the
remote control to close the skylight automatically.
Shortcut keys P1/P2
Keys for operating the product chosen
- for activating a program by pressing just one key.
Keys for operating a product or a Group of products
OPEN/UP or
CLOSE/DOWN
Short key pressure: Product will travel to maximum top or
bottom position.
Long key pressure: Product will travel to pre-set position.
See section Choosing positions.
Stop and status key
STOP / STATUS
Short key pressure: The product in operation stops or the
status is shown.
Long key pressure: All products in operation stop.
10 VELUX
ENGLISH
ENGLISH
VELUX 11
Locating and operating a product
To be able to operate a product (eg a roller shade), you first
have to locate the product in question in the display.
The examples show the easiest way to find the product
you want to operate.
One skylight
More than one skylight
With one electrical product
The skylight (indicated as "Window" in the remote display)
is equipped with a skylight operator only and therefore you
do not have to locate the product first.
Press
to start operation.
House
No. 1
Window
Menu
With one electrical product
Locate
House
Three skylights are equipped with skylight operators only.
No. 2
Window
The example shows how to locate and open skylight No. 2.
The skylight is equipped with a skylight operator and a
roller shade.
Press
to find the roller shade (indicated as "Blind").
Press
to start operation.
12 VELUX
ENGLISH
to find skylight No. 2 (indicated as "Window").
Press
to open the skylight.
Menu
Locate
P1
P2
Note: You can rearrange the order of the individual
products, Groups, Rooms and Zones displayed, see section
Rearranging order.
With more than one electrical product
The example shows how to locate and operate the roller
shade.
Press
House
No. 1
Blind
Menu
Locate
P1
P2
ENGLISH
VELUX 13
Locating and operating a product
Closing the skylight automatically
More than one skylight
	When a skylight has been opened with the remote control,
you can set it to close again automatically after a certain
time.
For instance you might want to air your house briefly
when returning home. The possible settings are: Disabled,
5 min, 10 min, 15 min, 20 min, 30 min, 45 min and 60 min.
	With more than one electrical product
	One skylight is equipped with a skylight operator. In
addition, all five skylights are each equipped with a roller
shade.
Press
 ocate skylight No. 1 (indicated as "Window").
to open the skylight.
Press
No. 1
Window
Menu
No. 1
Window
Locate
 he display shows the icon
and the text "Auto Close".
Start item 3 within 5 seconds, otherwise the skylight will
not close automatically.
Auto Close
P1
P2
House
 isplays the list of product types within the area House.
and highTo operate one of the roller shades, press
light "Blind".
Press
"Enter".
to highlight roller shade "No. 3".
"Enter".
Press
to start operation.
14 VELUX
Running
Window
Blind
Enter
Back
P1
P2
No. 1
No. 2
No. 3
No. 4
 ress
Press
Locate
Running
Menu
"Locate".
House
House
	The example shows how to locate and operate roller
shade No. 3.
 he example shows how to time skylight No. 1 (indiT
cated as "Window" in the remote display) to close after
10 minutes.
Enter
P1
Scroll via
through the time options and choose
"in: 10 min".
Auto Close
in: 10 min
P1
Blind
 he display shows the icon
skylight is closed.
and counts down until the
Back
P2
P2
House
No. 1
Window
Closes in 10 min
Menu
Locate
If you close the skylight earlier than chosen, the function
will be cancelled.
 ote: Registered products can be set to operate autoN
matically via Programs.
ENGLISH
ENGLISH
VELUX 15
Choosing positions
Disabling rain sensor
	A product or a Group of products can be set to travel to
a certain position.
	If the rain sensor gets wet, the skylight operator automatically closes the skylight within 30 seconds.
	The example shows how to set a roller shade to close by
50%.
	If you want to open the skylight even if it is raining, you
must disable the rain sensor. When the rain sensor is disabled, the skylight can only open up to 50% of its normal
opening distance.
	The example shows how skylight No. 1 (indicated as "Window" in the remote display) is opened even if it is raining.
 ocate the product in question, see section Locating and
operating a product.
House
 ote: If the rain sensor is disabled and "Auto Close" is not
set, see section Closing the skylight automatically, the
skylight will not close automatically for a period of
60 minutes. After this period, the skylight will remain
open as long as the rain sensor is dry.
No. 2
Blind
 roduct chosen is displayed. The example shows roller
shade No. 2 (indicated as "Blind").
Menu
Locate
P1
P2
House
Go to position
 ress and hold key
and watch the display. Each black
spot corresponds to the roller shade closing in 10% increments. Five black spots thus correspond to it closing by
50%.
 elease key
ition chosen.
and the roller shade will travel to the pos-
 ote: A short key pressure will make the roller shade travel
to maximum top or bottom position.
	Some decoration and sunscreening products can be
operated in two ways. For instance, a Venetian blind can
be drawn up and down and its slats can be tilted. Once the
with
product has been located, choose Tilt or Turn
the navigation keys
16 VELUX
ENGLISH
50% down
	Locate the skylight (indicated as "Window").
to open the skylight.
Press
No. 1
Window
Menu
Locate
information
 he display shows that the operation cannot be executed
because the skylight operator has been limited by the rain
sensor. You are asked whether the rain sensor is to be
disabled temporarily.
Press
"Yes" to disable the rain sensor temporarily.
Yes
Disable
rain sensor
temporarily?
P1
No
P2
	The rain sensor will now be disabled for 60 minutes.
When the skylight is closed, the rain sensor will be enabled again.
If the skylight is set to close automatically, the rain sensor
will only be disabled until the skylight is closed automatically.
	Note: It is recommended to set the skylight to close
automatically to reduce the risk of water to the interior of
the building.
ENGLISH
VELUX 17
Menu guide
Navigating through the menus
Guide to the menu functions of the remote control.
Additional information about the individual function is provided in the
relevant section.
	The example shows how to find the menu item Room by
means of menu choices.
Press
"Menu".
Group
Rearrange order
Rename
Clear
Enter
House
No. 1
Window
Menu
Back
Display
Access code
menu
Keypad lock
House settings
p. 22-25
p. 26-27
p. 46-47
p. 28-29
p. 50
 isplays a list of menu items under Menu.
to highlight "House settings".
Press
Press
Enter
Back
p. 20
p. 44-45
p. 42
p. 48
p. 43
"Enter" to confirm your choice.
System settings
Program settings
Back
Displays a list of menu items under House settings.
Press
Press
to highlight "Room".
"Enter" to confirm your choice.
 ou can now proceed with the menu functions under menu
item Room.
User settings
Locate
P1
P2
House settings
User settings
System settings
Program settings
Enter
Back
P1
P2
House settings
Room
Group
Rearrange order
Rename
Enter
Back
P1
P2
System settings
Register product
Copy system
Security key
Configure
Software version
Enter
Back
p. 52-53
p. 56-57
p. 60-61
Enable
p. 31-39
Record
Delete
Rename
Rearrange order
Enter
ENGLISH
Back
House
 his way of choosing menu items is shown as follows
in the rest of the instructions:
p. 49
program settings
18 VELUX
Menu
User settings
Language
Locate
Time and date
Enter
No. 1
Window
menu
House settings
Room
House
Press
Scroll through the menus:
"Menu".
House settings
No. 1
Window
Menu
Locate
P1
P2
Room
ENGLISH
VELUX 19
Changing language
Room, Group and Zone
	You can change the display text language.
To make it easier to locate and operate the products it
is recommended to link each product to a Room and/or
a Group. Products are as default shown under the area
House.
The example shows how to change it into French.
House
Room 2
No. 1
Window
Press
Scroll through the menus:
"Menu".
Room 1
Menu
Locate
P1
P2
Definition of Room
A Room consists of one or more products of any type
located in the same physical room, eg bedroom or kitchen.
A product can be assigned to one Room only.
User settings
Language
language
Dansk
English
Français
Deutsch
 he display shows a list of languages. The current lanT
guage has been ticked.
Room 1
Enter
Back
P1
P2
 ress
Press
to highlight a new language.
"Enter" to confirm your choice.
A Group consists of at least two products of the same type
(eg two roller shades).
In each Room, a Group "All" with all products of the same
type is automatically created to make it easier to locate
and operate products of the same type simultaneously.
language
Dansk
English
Français
Deutsch
Room 2
Definition of Group
Groups created across more Rooms are called Zones.
Enter
Back
P1
P2
Room 1
Room 2
Information
The display shows that the change has been saved.
20 VELUX
ENGLISH
Sauvegardé
Français
Definition of Zone
A Group created across more Rooms.
You can create a Zone consisting of for instance all roller
shades on the skylights of the house facing west and
south.
ENGLISH
VELUX 21
Creating a Room
	Rooms are created to make it easier to locate and operate
your products.
 he example shows two rooms
with two skylights (indicated as
"Window" in the remote display)
in each. Below it is shown how
to create Room 1 by moving the
relevant products from House to
Room 1.
House
No. 1
Window
Press
Menu
"Menu".
More
Continue
P1
P2
Save new Room
Undo product
Undo new Room
Displays a list of options.
Press
Press
to highlight "Save new Room".
"Enter" to confirm your choice.
Highlight one of the other options to undo your choice.
Locate
Enter
Back
P1
P2
Information
Room created
Scroll through the menus:
House settings
Room
Create
Product from
areas, here the area House.
3 Displays theto highlight
the area with the product to be as	Press
signed to Room 1 first.
Press
"Enter" to confirm your choice.
• P
 ress
"More" to move additional products to Room 1.
You will return to the list in item 4. Repeat items 4-5 until
the relevant products have been moved to Room 1.
• Press
"Continue" to proceed.
No. 1
Continue
House
House
Window
Displays the product chosen.
 isplays a list of all products in House. The product type,
in this case skylights (indicated as "Window"), appears in
the display. The individual products can be identified by
pressing
for a short period of time. This will activate
the product briefly.
Press
Press
22 VELUX
to highlight the product to be moved to Room 1.
"Enter" to confirm your choice.
ENGLISH
House
Enter
Back
P1
P2
The display shows that a new Room has been created.
 he display asks whether you want the remaining products
to be assigned to the next Room.
• Press
"Yes" to save the remaining products in
Room 2.
• Press
"No" to return automatically to the list in
item 3 and possibly create more Rooms.
Note: When creating Room 1, Room 2 will automatically
be created.
Information
Save all remaining
products in next
Room
Yes
No
Information
Room created
House
Window
No. 1
No. 2
No. 3
Enter
Back
P1
P2
The display shows that a new Room has been created.
 ote: Numbers are assigned in
the order in which the products
are moved to the Room in question.
Room 1
ENGLISH
Room 2
VELUX 23
Editing a Room
	You can edit the Rooms you have created, ie one or more
products can be moved from one Room to another.
 he example shows how the skylight operator in skylight
No. 1 (indicated as "Window" in the remote display) can be
moved from Room 1 to Room 2.
 isplays a list of the individual products within the product
type in question.
Press
to highlight the product to be moved. The individual products can be identified by pressing
for a
short period of time. This will activate the product briefly.
Press
Room 1
No. 1
Window
Press
Scroll through the menus:
"Menu".
House settings
Room
Menu
Locate
P1
P2
"Enter" to confirm your choice.
 isplays a list of Rooms in which the product can be
placed.
to highlight the Room in which the product is to
Press
be placed.
Press
"Enter" to confirm the new location of the
product.
Window
No. 1
No. 2
No. 3
Enter
Back
P1
P2
Place in
Room 1
Room 2
Room 3
Enter
Back
P1
P2
information
Rooms modified
Edit
The display shows that several Rooms have been modified.
Move from
Displays a list of the Rooms created.
Press
to highlight the Room from which the product is
to be moved.
"Enter" to confirm your choice.
Press
 isplays a list of product types in the Room from which the
product is to be moved.
To choose the product type skylight operator, press
and highlight "Window".
Press
"Enter" to confirm your choice.
24 VELUX
ENGLISH
Room 1
Room 2
Room 3
Enter
Back
P1
P2
 roups are edited according to the same principle as
Rooms.
 ote: Numbers are assigned in the order in which the
products are moved to the Room in question.
Room 1
Window
Blind
Enter
Back
P1
P2
ENGLISH
VELUX 25
Creating a Group
	To make it easier to locate and operate products of the
same type simultaneously, you can create a Group.
 he example shows a room with four
skylights, each with a skylight oper2
ator. It is shown how to create Group
1 consisting of the skylight operators
Room 1
on the two skylights No. 3 and No. 4
(indicated as "Window" in the remote
display). The example presupposes
that Room 1 has been created.
Note: A number of Groups, "All" each consisting of all
products of the same type in the Room in question, was
created automatically when Room 1 was created, see section Room, Group and Zone.
Press
Scroll through the menus:
to highlight the product to be included in Group 1.
Press
The individual products can be identified by pressing
for a short period of time. This will activate the product
briefly.
Press
No. 1
Window
"Menu".
Menu
Locate
P1
P2
 he display asks whether additional products are to be
moved to Group 1.
• Press
Enter
Back
P1
P2
Information
"Save" to create Group 1.
House settings
Group
Create
Add more to Group
or save Group
More
Save
P1
P2
Displays a list of the Rooms created.
to highlight the Room in which Group 1 is to be
Press
created.
Press
"Enter" to confirm your choice.
Room 1
Room 2
Room 3
Enter
Back
P1
P2
 roups are edited according to the same principle as
Rooms.
26 VELUX
ENGLISH
Group 1
Room 1
Window
Blind
Displays a list of the product types in Room 1.
To choose the product type skylight operator, press
highlight "Window".
Press
"Enter" to confirm your choice.
Group 1 created in
Room 1
 he display shows that Group 1 has been created in
Room 1.
Room 1
Window
No. 1
No. 2
No. 3
No. 4
Information
Product from
"Enter" to confirm your choice.
"More" to move additional products to Group
• P
 ress
1. You will return to the list in item 5. Repeat items 5-6
until these products have been moved to Group 1.
Room 1
	A Group created across more Rooms is shown in the
display as a Zone.
 isplays a list of the individual products within the product
type in question.
to
Enter
Back
P1
P2
 ote: When operating Groups a delayed execution of
commands might occur. If you want a particular product to
respond at once, this product must be operated individually.
ENGLISH
VELUX 27
Naming
Rename
 ou can change the name of House and the names of the
automatically numbered Rooms, Zones, Groups, products
and Programs into more personal names.
The example shows how to change Room 1 into Kitchen.
Room 1
 ote: When you have used the function Rename, autoN
matic renumbering is disabled.
Press
Scroll through the menus:
Press
Press
to highlight the character required.
"Enter" after each character.
Back
P1
P2
Locate
P1
P2
Save
KITCHEN
 ave the new name by choosing in the list when the
last character has been entered.
"Enter".
Press
CDEFGHI
Enter
P1
JK
Back
P2
Rename
Displays a list with House, Room, Zone, Group and Product.
Press
Press
JKLMNO
Rename
Menu
Information
Rename
GHI
Enter
No. 1
Window
"Menu".
House settings
Enter the new name using the list of characters.
to highlight "Room".
"Enter" to confirm your choice.
Room
Zone
Group
Product
Enter
Back
P1
P2
 he display shows that the new name has been
saved.
Saved
Area
Room 1
Room 2
Room 3
 isplays a list of the names automatically given to the
Rooms.
Press
Press
to highlight "Room 1".
"Enter" to confirm your choice.
Enter
Back
P1
P2
Rename
Room 1 A
ABCDEFGHI
 isplays a list of characters including the save function
the delete function
and the space character
28 VELUX
ENGLISH
Enter
Back
P1
P2
ENGLISH
VELUX 29
Programs
My program
	A program contains a sequence of commands on how and
when the products are to be operated.
	There are three different program types:
• M
 y program
A personal program that will be activated automatically
without using the remote control.
For instance you can record a morning program to
run up the roller shades in the bedroom and open the
skylights between 7 and 7.15 am on weekdays from
October to April.
• P
 rogram under Shortcut P1/P2
A personal program that can be activated by using the
shortcut keys.
For instance you can record and save a program under
shortcut key P1 to close all skylights in the house and
draw all blinds down by 50%.
	My program is an automatically activated program which
contains a sequence of operating commands for one or
more products. The sequence is automatically activated at
a pre-set time within a period defined by a starting date
and an end date.
	The example shows how to program skylight No. 1 (indicated as "Window" in the remote display) to open
at 6.30 pm and close again at 10.00 pm each Monday for
12 months.
Press
House
No. 1
Window
Menu
"Menu".
Scroll through the menus:
Program settings
Record
My program
 ote: If the current time and date has not been set
already, please do so before choosing "My program", see
section Time and date.
• S
 ynergy program
A pre-defined program for control of exterior
sunscreening products optimised for the European
countries and based on local conditions.
Locate
 ocate the skylight. The relevant product can be identiL
fied by pressing
for a short period of time. This will
activate the product briefly.
"Select" to choose the product.
Press
house
Window
No. 1
No. 2
No. 3
Select
Back
P1
P2
house
Window
 he display shows the selected product.
"Enter" to confirm your choice.
• Press
• Press
"Edit" to select additional products from the
list.
No. 1
Enter
Edit
P1
P2
Position
Set position
Save position
30 VELUX
ENGLISH
 ress
Press
to highlight "Set position".
"Enter" to confirm your choice.
ENGLISH
Enter
Back
P1
P2
VELUX 31
My program
Set day
Set Position
Monday
100% open
 ress
to set the opening position of the skylight.
100% corresponds to fully open.
Press
"Enter" to confirm your setting.
Enter
Back
P1
P2
11
 he display shows the chosen day of the week.
"Enter" to confirm your choice.
• Press
• Press
"Edit" to return to item 10 in case of additions or changes.
Enter
Edit
P1
P2
Position
Set position
Save position
 ress
Press
to highlight "Save position".
"Enter" to confirm your choice.
Save
Enter
Back
P1
P2
12
 he display shows various options.
to highlight "Add functions" to set the closing
Press
position of the skylight plus the day and time for closing.
Press
"Enter" to confirm your choice.
Save program
Add functions
Cancel recording
Enter
Back
P1
P2
Set time
0 0:30 pm
 ress
to set the time for the skylight to be opened.
First choose minutes.
Press
"Enter" to change to hours.
Enter
Back
P1
P2
House
Window
13
Set time
No. 1
 he display shows the latest selected product.
"Enter" to continue.
Press
Repeat items 5-11, only this time applied to the closing
settings.
Enter

The
display shows various options.
to highlight "Add functions" to add add• Press
itional operating commands for the skylight or other
products to the program.
"Enter" to return to item 13.
Press
• Press
to highlight "Save program" to save the
program as it is.
Press
"Enter" to save the program.
Save program
Add functions
Cancel recording
Edit
P1
P2
0 6:3 0 pm
 ress
Press
to set hours.
"Enter" to confirm your setting.
Enter
Back
P1
P2
Set day
to select the day of the week for the skylight
10 Ptoress
be opened.
Press
32 VELUX
"Select".
ENGLISH
Monday
Tuesday
Wednesday
Thursday
Select
Back
P1
P2
14
ENGLISH
Save
Enter
Back
P1
P2
VELUX 33
My program
Information
Rename
15

The
display automatically suggests the name "My
program 1".
"Enter" to save the name.
Press
Follow the instructions in section Naming to change this
name.
Save
My program 1
ABC
DEFG HI
Enter
Back
P1
 he display asks whether to enable the program or to
keep it disabled.
to highlight "Enable".
Press
Press
"Select" to confirm your choice.
 he display shows that My program 1 is enabled in the
chosen period.
P2
my program 1
16
19
My program 1
enabled
from 2008.01.01
to 2008.12.31
Enable
Disable
Select
Back
P1
P2
	 Choose "Enable" under menu item Program settings
to get a full list of all recorded programs that can be
activated automatically. The list comprises both enabled
and disabled programs. The enabled programs have been
ticked and the disabled programs can be enabled any
time you want.
Note: For solar products, automatically activated programs may result in a quick discharge of the battery due
to frequent operation of the products.
Set starting and end date to enable the program.
Set date
Starting date
2008.01.01
Starting date:
17
Press
Press
"Edit" to choose a starting date.
"Enter" to confirm your setting.
Enter
Edit
P1
P2
Set date
End date
2008.12.31
End date:
18
 ress
Press
34 VELUX
"Edit" to choose an end date.
"Enter" to confirm your setting.
ENGLISH
Enter
P1
Edit
P2
ENGLISH
VELUX 35
Program under Shortcut P1/P2
A program under Shortcut P1/P2 contains a sequence
Set Position
of operating commands for one or more products. The
sequence is activated by pressing shortcut key P1 or P2.
You can record up to eight programs, four under each of
the shortcut keys. The programs can be set to be executed immediately, with a delay or at a certain time.
100% open
ress
to set the opening position of the skylight.
6 P100%
corresponds to fully open.
Press
 he example shows how to program skylight No. 1
(indicated as "Window" in the remote display) to open
immediately and close again after 1 hour and 30 minutes
(delay) by a single pressure on shortcut key P1.
P1
P2
Position
Set position
Save position
No. 1
Window
Locate
"Menu".
 ress
Press
to highlight "Save position".
"Enter" to confirm your choice.
Enter
Back
P1
P2
Scroll through the menus:
Program settings
Record
Shortcut P1/P2
 ote: If the current time and date has not been set alN
ready, please do so before choosing "Shortcut P1/P2", see
section Time and date.
Back
House
Menu
Press
"Enter" to confirm your setting.
Enter
 ocate the skylight. The relevant product can be identiL
fied by pressing
for a short period of time. This will
activate the product briefly.
Press
"Select" to select the product.
 he display shows the selected product.
• Press
"Enter" to confirm your choice.
• Press
"Edit" to select additional products from the
list.
House
Window
No. 1
No. 2
No. 3
Time control
Select
Back
P1
P2
he display shows two time setting options.
8 TPress
to highlight "Delay", ie the time that will pass
from pressing P1 till the product will be activated.
Press
"Enter" to confirm your choice.
Delay
Starting time
Enter
Back
P1
P2
House
Window
delay
No. 1
Enter
Edit
P1
P2
ress
to set the relevant delay. First choose minutes.
9 PChoose
0 minutes if you want the skylight to open immediately.
Press
"Enter" to change to hours.
00 h 00 min
Enter
Back
P1
P2
delay
Position
Set position
Save position
 ress
Press
36 VELUX
to highlight "Set position".
"Enter" to confirm your choice.
ENGLISH
00 h 00 min
Enter
Back
P1
P2
ress
10 PPress
to set hours.
"Enter" to confirm your setting.
ENGLISH
Enter
Back
P1
P2
VELUX 37
Program under Shortcut P1/P2
delay
Save
11
 he display shows various options.
to highlight "Add functions" to set the closing
Press
position and time of the skylight.
Press
"Enter" to confirm your choice.
Save program
Add functions
Cancel recording
Enter
Back
P1
P2
00 h 30 min
16
 ress
Press
to set the delay. First choose minutes.
"Enter" to change to hours.
Enter
Back
P1
P2
delay
House
Window
01 h 30 min
No. 1
12
 he display shows the latest selected product.
"Enter" to continue.
Press
Enter
Edit
P1
position
 ress
Press
to highlight "Set position".
"Enter" to confirm your choice.
to set hours.
"Enter" to confirm your setting.
P2
Back
P1
P2
display shows various options.
18 T• he
to highlight "Add functions" to add addPress
Set position
Save position
13
17
 ress
Press
Enter
Enter
Back
P1
P2
itional operating commands for the skylight or other
products to the program.
Press
"Enter" to return to item 12.
• Press
to highlight "Save program" to save the
program as it is.
Press
"Enter" to save the program.
Set position
Save
Save program
Add functions
Cancel recording
Enter
Back
P1
P2
0% open
14
 ress
to set the closing position of the skylight. 0%
corresponds to fully closed.
Press
"Enter" to confirm your setting.
Rename
Enter
Back
P1
P2
Time control
15
 he display shows two time setting options.
to highlight "Delay", ie the time that will pass
Press
from pressing P1 till the product will be activated.
Press
"Enter" to confirm your choice.
38 VELUX
ENGLISH
19
 he display automatically suggests the name
"Shortcut 1".
"Enter" to save the name.
Press
Follow the instructions in section Naming to change this
name.
Delay
Starting time
Save
Shortcut 1
ABC
Enter
P1
DEFGHI
Back
P2
Information
Enter
Back
P1
P2
20 The display shows that Shortcut 1 has been saved.
ENGLISH
Shortcut 1
saved
under P1/P2
VELUX 39
Program under Shortcut P1/P2
	 Interrupting a program under Shortcut P1/P2
Activating a program under Shortcut P1/P2
 ou can activate any one of the personal shortcut
programs by pressing the shortcut key P1 or P2. You can
still use the various functions of the remote control at the
same time as one or more programs have been activated.
Icon
indicates that a program has been activated. A
shortcut program in progress can be interrupted as
follows:
House
 elow four shortcut programs have been recorded under
shortcut key P1. The example shows how to activate the
program under Shortcut 3 via shortcut key P1.
No. 1
Window
House
 ress P1 three times to activate the program under
Shortcut 3.
Note: Max time interval between each key pressure:
2 seconds. Otherwise the shortcut program that happens
to be highlighted will be activated.
Press
P1
or
P2
to find the shortcut program in progress.
No. 1
Window
Menu
Locate
P1
P2
Menu
Locate
P1
P2
shortcut p1
The activated shortcut program has been ticked.
Press
Press
to highlight the program in question.
"Stop" to interrupt the program.
Shortcut 1
Shortcut 2
Shortcut 3
Shortcut 4
Stop
Back
P1
P2
shortcut p1
Shortcut 1
Shortcut 2
Shortcut 3
Shortcut 4
 hortcut 3 is highlighted in the display and the program
automatically starts.
40 VELUX
ENGLISH
Start
Back
P1
P2
ENGLISH
VELUX 41
Time and date
Keypad lock
	Time and date must be set manually the first time the
remote control is to be used. The time and date format
can be set in item 4 by choosing "Set format".
House
 he example shows how to set the time. The date is set
correspondingly by choosing "Date" in item 3.
Press
Scroll through the menus:
User settings
 ress
Press
No. 1
Window
Menu
"Menu".
	The keypad can be locked so that products cannot be operated without unlocking the keypad. The stop key can
still be used.
Locate
Time and date
Time and date
to highlight "Clock".
"Enter" to confirm your choice.
Clock
Date
Enter
Back
P1
P2
to highlight "Set time".
"Enter" to confirm your choice.
Scroll through the menus:
Time
 ress
Press
Press
"Menu".
User settings
No. 1
Window
Menu
Locate
P1
P2
Keypad lock
Keypad lock
Set time
Set format
House
Enter
Back
P1
P2
Disable
Enable
 ress
to highlight "Enable".
Press
"Enter" to confirm your choice.
The keypad lock is immediately activated.
Enter
Back
P1
P2
Set Time
Using the keypad even if it is locked:
11: 0 0 a m
 ress
Press
to set minutes.
"Enter" to change to hours.
 ress
Press
to set hours.
"Enter" to confirm your settings.
Enter
Back
P1
P2
Set Time
 ime is shown automatically when the remote control is
in sleep mode. See section Display.
42 VELUX
ENGLISH
 essage as shown.
"Menu". Press
"Locate".
Press
The keypad has temporarily been unlocked.
The keypad will automatically be locked again 20 seconds
after it has been used.
Keypad lock
Menu
P1
Press
Menu
and then
Locate
Locate
P2
11: 0 0 a m
Enter
Back
P1
P2
 ote: The keypad lock can be deactivated by choosing
"Disable" in item 3.
ENGLISH
VELUX 43
Display
Display light
Sleep mode
	In standard settings, the light in the display is turned on
when the keypad is activated and turned off again after
20 seconds. If you do not want any light in the display and
you want to prolong the battery lifetime, you can opt out
of this.
The example shows how to turn off the light in the display.
Press
"Menu".
House
	The life of the batteries can be prolonged by setting the
remote control to go into sleep mode. When it has been
set to go into sleep mode, the light in the display will be
turned off 20 seconds after the latest key pressure. Time
is shown.
No. 1
Window
	Press any key to activate the remote control again. However, the stop key can be used at any time.
Menu
Locate
P1
P2
Scroll through the menus:
User settings
Display
Display
Display light
Sleep mode
 ress
Press
to highlight "Display light".
"Enter" to confirm your choice.
Enter
P1
	The example shows how to set the remote control to go
into sleep mode.
Press
No. 1
Window
Menu
"Menu".
Scroll through the menus:
User settings
Display
Back
P2
House
3	Press
Press
to highlight "Sleep mode".
"Enter" to confirm your choice.
Display
Display light
Sleep mode
Enter
Back
P1
P2
Display light
Sleep mode
On
Off
 ress
Press
to highlight "Off".
"Enter" to confirm your choice.
 ote: The light in the display can be turned on by choosing
"On" in item 4.
Locate
On
Off
Enter
Back
P1
P2
	Press
Press
to highlight "On".
"Enter" to confirm your choice.
Enter
Back
P1
P2
03:43 am
	When the remote control is in sleep mode, time is shown.
	Note: Choose "Off" in item 4 if you do not want the
remote control to go into sleep mode.
44 VELUX
ENGLISH
ENGLISH
VELUX 45
Rearranging order
 ou can rearrange the order of the individual products,
Groups, Rooms and Zones displayed.
In the example, three Rooms have been created. It shows
how to rearrange the order of the roller shades (indicated
as "Blind" in the remote display) in Room 2.
 isplays a list of the individual products of the chosen
product type. The individual products can be identified by
pressing
for a short period of time. This will activate
the product briefly.
to highlight the product in question.
Press
Press
"Enter" to confirm your choice.
Rearrange order
No. 1
No. 2
No. 3
Enter
Back
P1
P2
Room 1
Rearrange order
No. 1
Window
Menu
Press
Scroll through the menus:
"Menu".
House settings
P1
Rearrange order
Locate
P2
Product
Rearrange order
 isplays a list of the Rooms created containing the prodD
ucts in question.
Press
to highlight the Room in which the order of the
individual products is to be rearranged.
Press
"Enter" to confirm your choice.
Room 1
Room 2
Room 3
Enter
Back
P1
P2
 he list of the individual products of the chosen product
type is still displayed.
to move the chosen product.
Press
Press
"Enter" to confirm the rearranged order.
 he display asks whether the order of more products is to
be rearranged or whether the changes made until now are
to be saved.
• Press
"More" to rearrange the order of more products. You will return to the list in item 5. Repeat items
5-7 until the required order of products has been
obtained.
• Press
"Save" to save the rearranged product order.
No. 1
No. 3
No. 2
Enter
Back
P1
P2
Information
Save new order
or rearrange more
products
Save
More
P1
P2
Information
Rearrange order
Displays a list of the product types in Room 2.
Press
to highlight the product type where the order of
the individual products is to be rearranged.
Press
"Enter" to confirm your choice.
46 VELUX
ENGLISH
Window
Blind
Enter
Back
P1
P2
Order rearranged
The display shows that the order has been rearranged.
ENGLISH
VELUX 47
Access code
Software version
	You can choose a personal access code to protect your
personal settings, for instance against unintentional deletion of programs. The access code must consist of four
digits from 0 to 9.
Press
Scroll through the menus:
"Menu".
User settings
 ress
Press
	When addressing technical inquiries to VELUX, you will be
asked to provide the version number of the software in the
remote control. To find this proceed as follows:
House
No. 1
Window
Menu
Locate
P1
P2
Access code
Access code
to highlight "Select/Change".
"Enter" to confirm your choice.
Select / Change
Delete
Room 1
Enter
Back
P1
P2
Access code
 ress
Press
Press
to choose the first digit.
"Enter" to go to the next digit.
"Enter" when the last digit has been chosen.
Enter code
1 ***
Enter
Back
P1
P2
No. 1
Window
Press
Scroll through the menus:
"Menu".
System settings
Menu
Locate
P1
P2
Software version
software version
Access code
Confirm code
1 2 3 4
Press
"Save" to confirm and save the code.
Save
Back
P1
P2
004.000.000.076
 he display shows a code, for instance 004.XXX.XXX.XXX.
The first three digits are the version number.
Press
"Back" to return to the previous menu.
Back
P1
P2
System settings
Copy system
Security key
Configure
Software version
 very time you now choose Menu, you must enter the acE
cess code before you can proceed.
 ote: The access code can be cancelled by choosing
"Delete" in item 3.
48 VELUX
ENGLISH
The display shows the previous menu.
ENGLISH
Enter
Back
P1
P2
VELUX 49
Clearing remote control settings
	When clearing the remote control settings, all personal
settings for eg Rooms, Zones, Groups and Programs and
all personal names are deleted. The products, however,
remain registered in the remote control.
Room 1
No. 1
Window
Menu
Press
Select the submenu:
"Menu".
Locate
P1
P2
House settings
House settings
 isplays a list of menu items.
to highlight "Clear".
Press
Press
"Enter" to confirm your choice.
Group
Rearrange order
Rename
Clear
Enter
Back
P1
P2
Clear
 he display asks whether you want to clear all Groups,
Rooms, Zones, Programs and personal names you might
have created.
"Yes" to confirm your choice.
• Press
• Press
"No" to cancel your choice.
Clear all Groups/
Rooms/Zones/
Programs/Names
Yes
P1
No
P2
The remote control settings are cleared.
50 VELUX
ENGLISH
ENGLISH
VELUX 51
Registering new products
	When a new additional product has been installed, it can
be registered in a remote control already in operation.
This new product can for instance be another skylight, a
Venetian blind or a roller shade.
Information
	The example shows how to register a new roller shade
(indicated as "Blind" in the remote display) in the remote
control and place it in Room 1.
Now the product must be placed.
7a
 repare the product for registration.
Disconnect the main power supply for 1 minute and then
reconnect it. The product can now be registered in the
remote control within the next 10 minutes.
7b
House
No. 1
Window
 ress
ation.
"Menu" in the remote control already in oper-
Menu
Locate
P1
P2
System settings
System settings
Register product
Copy system
Security key
Configure
to highlight "Register product".
"Enter" to confirm your choice.
Enter
Back
P1
P2
Auto set-up
Registration is running. This can take up to two minutes.
52 VELUX
ENGLISH
House
No. 1
Blind
If no Rooms have been created, the product is automatically placed in House.
Operation can start.
If Rooms have been created, the product has to be
placed in the appropriate Room.
The display shows a list of new products. The individual
for a short
products can be identified by pressing
period of time. This will activate the product briefly.
to highlight the product to be placed.
Press
Press
"Enter" to confirm your choice.
Menu
Locate
P1
P2
New products
Blind
No. 1
Enter
P1
P2
Place in
Select the submenu:
 ress
Press
 he display shows that the new product has been regisT
tered.
New products
registered
 isplays a list of the Rooms created.
to highlight the Room in which the product is
Press
to be placed.
Press
"Enter" to confirm your choice.
Room 1
Room 2
New Room
Enter
Back
P1
P2
Information
 he display shows that the Room has been modified.
Operation can start.
Room modified
 here more than one remote control is used, new prodW
ucts can also be operated with these. To do this, register
the new products in each remote control by repeating
items 2-9 for each of them.
ENGLISH
VELUX 53
Using additional activation controls
Products and remote control settings can be copied
from one remote control to another. Copying depends
on whether the remote control to be copied to is new or
already in operation.
• C
 opying to a new remote control
How to copy the contents from one remote control to
another remote control not yet in operation.
• Copying to a remote control in operation
How to copy the contents from one remote control to
another remote control where the two remote controls
have not registered the same products.
Note: When copying between two VELUX remote
controls, all registered products and personal settings
are copied, apart from personal programs that cannot be
copied.
54 VELUX
ENGLISH
ENGLISH
VELUX 55
Copying to a new remote control
Step 2: Register products in remote control B
	You can copy the contents from a remote control already in
operation to a new one so that the latter can also operate
the products registered.
	The example shows how to copy the products and the
personal settings from a remote control A in operation to a
new remote control B not yet in operation.
Insert the three batteries supplied
(type AA, 1.5 volt) into the remote
control as shown.
Language
Step 1: Prepare remote control A for copying
Select the submenu:
Menu
"Menu".
Locate
P1
P2
 ress
"Register" to start registration of each product.
Please disregard the information in the display.
Prepare products
for registration and
press Register
within 10 minutes
Register
Info
The display now indicates that copying is in progress.
System settings
System settings
Register product
Copy system
Security key
Configure
Enter
Auto set-up
House
No. 1
Window
Press
 he language chosen in remote control A is automatically
chosen for remote control B.
"Enter".
Press
Eesti
English
Español
Français
 ress
Press
to highlight "Copy system".
"Enter" to confirm your choice.
Enter
Back
P1
P2
 emote control B can now operate the same products as
remote control A.
 tep 2 must now be completed within the next two minS
utes.
56 VELUX
ENGLISH
ENGLISH
VELUX 57
Copying to a remote control in operation
If you have two remote controls with different products
registered in them, you can copy the contents from one to
the other and vice versa. Then all products can be operated with both remote controls.
The example shows how to copy the products from remote control A to remote control B and at the same time
maintain the settings and the programs of both remote
controls.
Note: With the shown procedure, only the products are
copied from remote control A to remote control B and
vice versa. If you want an exact copy of remote control
A with all personal settings such as Names, Rooms and
Groups, you must proceed differently after step 2. First
reset remote control B, see section Resetting the remote
control. Then copy from remote control A as described in
section Copying to a new remote control.
Step 1: Change security key in remote controls A and B
Change the security key in both remote controls so that
they have the same security key, see section Security key.
Step 2: Register the products in remote control A
Register all products in remote control A by choosing:
Menu
System settings
Register product
If in doubt, see section Registering new products.
Remote control A can now operate both the products
from remote control B and the products it could already
operate.
Step 3: Register the products in remote control B
Register all products in remote control B by choosing:
Menu
System settings
Register product
Remote control B can now also operate both the products
from remote control A and the products it could already
operate.
After this both remote controls can operate all products.
58 VELUX
ENGLISH
ENGLISH
VELUX 59
Security key
	Each remote control and each product have a security key.
To allow for communication between remote control and
products, they must have the same security key. This also
ensures that external activation controls cannot communicate with the products and thus operate the products
unintentionally.
 he example shows how to change the security key in
remote control A and in the products registered in A
(step 1). If you have more than one remote control, the
new security key must also be transferred to these
(step 2).
House
Step 1: Change security key in remote control A
Press
Scroll through the menus:
Menu
"Menu".
System settings
Locate
Security key
 ress
to highlight "Change".
Press
"Enter" to confirm your choice.
The display now indicates that the security key has been
changed.
 he display asks whether the security key of other remote
controls is to be changed.
"No" to finish if this is the only remote control
• Press
being changed.
• Press
"Yes" if there are other remote controls.
Execute step 2 for these.
60 VELUX
ENGLISH
No. 1
Window
Menu
Press
Scroll through the menus:
Locate
"Menu".
System settings
Security key
Security key
House
 tep 2: Change security key in remote control B (and
other)
No. 1
Window
Security key
Change
Receive
Enter
Back
P1
P2
 ress
Press
to highlight "Receive".
"Enter" to confirm your choice.
	The display indicates that the security key is being transferred from remote control A to remote control B.
Change
Receive
Enter
Back
P1
P2
Change
Change security
key in another
remote control
Yes
No
ENGLISH
VELUX 61
Resetting and preparing for registration
Resetting the remote control
	The remote control can be reset to its initial factory settings if you want to delete all registered products and all
programming and start afresh.
The skylight can be reset to its initial factory settings
and then be prepared for registration.
 o reset the skylight, make sure that it has been closed
by inserting a pointed object in the skylight operator
cover hole marked A and pressing briefly.
 hen the skylight is closed, press with a pointed
object through the operator cover hole marked A for
at least 5 seconds. The skylight operator and other
electrical products connected to the skylight will run
briefly back and forth indicating that they are ready to
be registered.
 ote: A reset removes the connection between the
skylight with its electrical products and all remote
controls. Therefore the products cannot be operated
until they have been registered in a remote control
again. To reinstate the connection between product
and remote control after reset, please refer to the
instructions in section Initial set-up.
Slide off the battery cover as shown.
 ress the button on the right side of the remote control
with a pointed object for at least 5 seconds.
Replace the battery cover.
min 5 sec
Information
 ress
"Yes" to confirm that you want to reset the
remote control.
The remote control
will be reset.
Continue?
Yes
No
 he remote control has now been reset. To reinstate the
connection between remote control and products, please
refer to the instructions in section Initial set-up.
62 VELUX
ENGLISH
ENGLISH
VELUX 63
Adjusting the opening
	The skylight can be adjusted to two different openings, depending on the installation height. By default
the opening is about 12" (300 mm), but for in-reach
applications where the skylight is installed less than
8 ft. (2.5 m) from the floor, the shorter 4" (100 mm)
opening must be used.
 hen the skylight is closed, press with a pointed
object through the operator cover hole marked A for
at least 5 seconds. The skylight operator and other
electrical products connected to the skylight will run
briefly back and forth indicating that they are ready to
be registered.
 o change the opening, reset the skylight as described
in items 1 and 2 in section Resetting and preparing for
registration.
 isconnect the main power supply for more than
60 seconds. Reconnect the power, insert a pointed
object in the skylight operator cover hole marked B
and press for at least 10 seconds or until the skylight
opens. Button B must be pressed within 30 seconds
of reconnecting power. The skylight will open to the
opening that was already set in the skylight operator.
	Note: The same procedure applies to a change of
opening from in-reach to out-of-reach applications.
min 5 sec
 o reinstate the connection between skylight and
remote control, register the skylight with its electrical
products in the remote control again. Please refer to
the instructions in section Initial set-up or Registering
new products.
min 10 sec
 hen the skylight stops, press briefly with a pointed
object through operator cover hole marked B to
change this opening to the alternative length. When
the skylight has stopped at the desired opening, press
briefly with a pointed object through operator cover
hole marked A to accept the new opening setting. The
skylight closes.
64 VELUX
ENGLISH
ENGLISH
VELUX 65
Fitting of holder for remote control
	The remote control is provided with a wall-mounted
holder, which can be fitted anywhere in your home.
	If required, the remote control can be fastened with
screws to the holder.
 ote: Check that the remote control can operate the
relevant products from the proposed position before it is
fastened to the holder.
 it the back section to the wall with the two screws supF
plied.
 lace the remote control in the front section. Clip the
white strap around the assembled unit. Hook the assembled unit to the back section at the top. Ensure that
the strap fits into the openings in the sides of the back
section. Lock the unit into place at the bottom.
Fix the unit with screw at the bottom.
 it the back section to the wall with the two screws supF
plied.
 ook the front section onto the back section at the top,
click it into place at the bottom and fix it with a screw.
 lace the remote control in the holder. It is secured by
means of built-in magnets.
66 VELUX
ENGLISH
ENGLISH
VELUX 67
Power failure / Mislaid remote control
Maintenance
Closing skylights
	Switch off the main power supply before proceeding!
In case of power failure
	The chain can be disengaged by removing
the plug in the center of the bottom sash
and turning the screw, with the provided
2.5 mm hex key, clockwise until it stops.
 now and ice
Remove snow and ice to allow melt water to drain off from
and around the skylight.
 leaning the rain sensor
Dirt on the rain sensor may cause operating problems.
Therefore, it is recommended to clean the rain sensor with
a soft wet cloth once or twice a year or when needed.
	Note: The chain can be re-engaged by
executing the above procedure in reverse
order.
	If the remote control has been mislaid
	The sash can be closed by inserting a
pointed object in the operator cover hole
marked A and pressing briefly.
 ote: A battery backup unit can be conN
nected. Please contact VELUX for further
information.
68 VELUX
ENGLISH
ENGLISH
VELUX 69
Display symbols
Display texts
Batteries must be changed within 2 weeks (type AA, 1.5
volt).
Automatic closing has been activated for the product in
question.
Automatic closing has been activated for one of the products
in the remote control.
Automatic registration of product(s) is running.
Battery level low: The batteries in the remote control are running out of
power.
Blocked: Unknown object obstructs operation of product. Remove obstruction to obtain normal operation.
Limited by rain sensor: It is raining and the rain sensor has been activated.
You can disable the rain sensor temporarily and operate the skylight.
Manual operation: The skylight has been opened manually. Close the skylight manually to allow for electrical operation.
Operational defect: The product has stopped during operation. Check the
product.
Reduced power supply: The power supply to the product has been reduced.
Limited operation.
Operation of a product.
The product or function requested has been ticked.
A program has been activated.
Slats/louvres of a decoration and sunscreening product can
be tilted/turned from 0 to 100%.
A decoration and sunscreening product can be drawn up/
down or opened/closed from 0 to 100%.
A name can be saved, see section Naming.
Deletion of character, see section Naming.
Space character, see section Naming.
70 VELUX
ENGLISH
ENGLISH
VELUX 71
Glossary
Activation control: An object by which you can actively operate an electrical product by means of pressing one or several buttons/keys.
Adjustment: VELUX electrical decoration and sunscreening products are not
adjusted to the skylight size on delivery. When operated the first time, they
will therefore run from bottom to top of the skylight or vice versa without
interruption. After adjustment the product is ready for use.
Configuration: See Preparation for registration.
Memory: The following functions occupy the memory of the remote control:
Room, Group, Rename and Programs. Use of these functions will reduce the
total memory.
Preparation for registration: A product must be registered in an activation
control before it can be operated. When a new product is connected to main
power supply, it will search for an activation control for 10 minutes.
Product: A product, which can be operated with the remote control, such as
a skylight, a roller shade or a Venetian blind.
Registration: A product is registered in an activation control when the
security key of the activation control is assigned to the product.
Repeater: A unit increasing the range of the remote control.
72 VELUX
ENGLISH
ENGLISH
VELUX 73

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.2-c063 53.352624, 2008/07/30-18:12:18
Create Date                     : 2009:12:10 12:43:31+01:00
Metadata Date                   : 2009:12:10 12:43:37+01:00
Modify Date                     : 2009:12:10 12:43:37+01:00
Creator Tool                    : Adobe InDesign CS4 (6.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 512
Thumbnail Height                : 512
Thumbnail Image                 : (Binary data 22748 bytes, use -b option to extract)
Instance ID                     : uuid:bd1a7270-4067-47c6-8e8b-2f72fd873cc2
Document ID                     : xmp.did:572A192672E5DE1194ABEFCEEA5D631D
Original Document ID            : adobe:docid:indd:3d94d51a-b22b-11dd-bdc0-e89b9fb8edc0
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:562A192672E5DE1194ABEFCEEA5D631D
Derived From Document ID        : adobe:docid:indd:3d94d51a-b22b-11dd-bdc0-e89b9fb8edc0
Derived From Original Document ID: adobe:docid:indd:3d94d51a-b22b-11dd-bdc0-e89b9fb8edc0
Derived From Rendition Class    : default
History Action                  : saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:7E14BBEA7398DE11A7CCF4AED46F2271, xmp.iid:0AE660717598DE11A7CCF4AED46F2271, xmp.iid:562A192672E5DE1194ABEFCEEA5D631D, xmp.iid:572A192672E5DE1194ABEFCEEA5D631D, xmp.iid:582A192672E5DE1194ABEFCEEA5D631D, xmp.iid:592A192672E5DE1194ABEFCEEA5D631D
History When                    : 2009:09:03 12:35:04+02:00, 2009:09:03 12:35:04+02:00, 2009:12:10 12:29:24+01:00, 2009:12:10 12:29:24+01:00, 2009:12:10 12:31:26+01:00, 2009:12:10 12:43:13+01:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /metadata, /;/metadata, /, /
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:450E5C4671BADB1180EB94CC397913AE, uuid:994B2AA28F69DB119C01CC16D2A99A56, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:DCB43E29CA28DE11A158F3F09272D9EF, uuid:DCB43E29CA28DE11A158F3F09272D9EF, uuid:DCB43E29CA28DE11A158F3F09272D9EF, uuid:DCB43E29CA28DE11A158F3F09272D9EF, uuid:DCB43E29CA28DE11A158F3F09272D9EF, uuid:C1AB32DAB780DD11AFF99C6516A4BC4A, uuid:C1AB32DAB780DD11AFF99C6516A4BC4A, uuid:DCB43E29CA28DE11A158F3F09272D9EF, uuid:C1AB32DAB780DD11AFF99C6516A4BC4A, uuid:C1AB32DAB780DD11AFF99C6516A4BC4A, uuid:764385B4C180DD11AFF99C6516A4BC4A, uuid:784385B4C180DD11AFF99C6516A4BC4A, uuid:744385B4C180DD11AFF99C6516A4BC4A, uuid:724385B4C180DD11AFF99C6516A4BC4A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:2211B2C7D5ACDD11AE18DEB424FCA50C, uuid:2211B2C7D5ACDD11AE18DEB424FCA50C, uuid:C1AB32DAB780DD11AFF99C6516A4BC4A, uuid:BFAB32DAB780DD11AFF99C6516A4BC4A, uuid:2211B2C7D5ACDD11AE18DEB424FCA50C, uuid:A59018E0EBA6DB118D8DE1CF1D57A0CC, uuid:A69018E0EBA6DB118D8DE1CF1D57A0CC, uuid:A79018E0EBA6DB118D8DE1CF1D57A0CC, uuid:2211B2C7D5ACDD11AE18DEB424FCA50C, uuid:7A4385B4C180DD11AFF99C6516A4BC4A, uuid:6A0E4546AB80DD11AFF99C6516A4BC4A, uuid:99A689640BAFDD118D4ADB5EA09C8E8E
Manifest Reference Document ID  : uuid:BB15DA17568D11DABE5C985CB5EB2284, uuid:984B2AA28F69DB119C01CC16D2A99A56, uuid:D9B43E29CA28DE11A158F3F09272D9EF, uuid:D9B43E29CA28DE11A158F3F09272D9EF, uuid:D9B43E29CA28DE11A158F3F09272D9EF, uuid:D9B43E29CA28DE11A158F3F09272D9EF, uuid:D9B43E29CA28DE11A158F3F09272D9EF, uuid:C0AB32DAB780DD11AFF99C6516A4BC4A, uuid:C0AB32DAB780DD11AFF99C6516A4BC4A, uuid:D9B43E29CA28DE11A158F3F09272D9EF, uuid:C0AB32DAB780DD11AFF99C6516A4BC4A, uuid:C0AB32DAB780DD11AFF99C6516A4BC4A, uuid:754385B4C180DD11AFF99C6516A4BC4A, uuid:774385B4C180DD11AFF99C6516A4BC4A, uuid:734385B4C180DD11AFF99C6516A4BC4A, uuid:714385B4C180DD11AFF99C6516A4BC4A, uuid:C2AB32DAB780DD11AFF99C6516A4BC4A, uuid:C2AB32DAB780DD11AFF99C6516A4BC4A, uuid:C0AB32DAB780DD11AFF99C6516A4BC4A, uuid:BEAB32DAB780DD11AFF99C6516A4BC4A, uuid:C2AB32DAB780DD11AFF99C6516A4BC4A, uuid:C2AB32DAB780DD11AFF99C6516A4BC4A, uuid:794385B4C180DD11AFF99C6516A4BC4A, uuid:690E4546AB80DD11AFF99C6516A4BC4A, uuid:BCAB32DAB780DD11AFF99C6516A4BC4A
Doc Change Count                : 45
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Page Count                      : 37
Creator                         : Adobe InDesign CS4 (6.0.4)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: XSG833429

Navigation menu