VIEVU LE5LIT WEARABLE VIDEO CAMERA User Manual 2ABBNLE5LIT Regulatory statements

Download:
Mirror Download [FCC.gov]
Document ID	3347818
Application ID	oKgOEF3IpWsKCoJhwem4BQ==
Document Description	2ABBNLE5LIT_Regulatory statements
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.18kB (77214 bits)
Date Submitted	2017-04-06 00:00:00
Date Available	2017-04-07 00:00:00
Creation Date	2016-11-22 09:45:04
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2017-02-15 08:06:37
Document Title	2ABBNLE5LIT_Regulatory statements
Document Creator	Adobe InDesign CS4 (6.0.6)

FCC CLASS B NOTICE
FCC rev2
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications to this product not authorized by
VIEVU® could void the electromagnetic compatibility (EMC) and wireless
compliance and negate your authority to operate the product. This
product has demonstrated EMC compliance under conditions that
include the use of compliant peripheral devices and shielded cables
between system components. It is important that you use compliant
peripheral devices and shielded cables between system components to
reduce the possibility of causing interference to radios, televisions, and
other electronic devices. This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled environment for body-worn
configuration in direct contact to the phantom. This device meets the
government’s requirements for exposure to radio waves. This device is
designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. The exposure
standard for wireless devices employing a unit of measurement is known
as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6W/kg. The FCC has granted an Equipment Authorization for this
device with all reported SAR levels evaluated as in compliance with the
FCC RF exposure guidelines. SAR information on this device is on file with
the FCC and can be found under the Display Grant section of
www.fcc.gov/oet/ea/fccid after searching FCC ID: 2ABBNLE5LIT
LIMITED WARRANTY
Product Warranty. Company warrants to purchaser that the Products
purchased here under shall be free from defects in materials and
workmanship and shall conform in all material respect to the specifications
for a period of ninety (90) days from the date of delivery thereof, provided
the Product in question has been stored and used in accordance with
ordinary industry practices and conditions. The use of non-Company
branded or approved accessories or replacement parts may result in
damage not covered by warranty. Company does not warrant that
the operation of the products will be uninterrupted or error free.
Remedies. In the event that a Product does not comply with
the product warranty set out above and such non-conforming
Product is returned to Company within the warranty period by
Purchaser freight prepaid, Company will repair or replace such
non-conforming Product at no additional charge to Purchaser; the
repaired or replaced Product will be returned to Purchaser, freight prepaid.
Disclaimer of Warranties. The foregoing express warranties are limited to
company and are not transferable and are in lieu of any other warranty by
Company with respect to Products furnished hereunder. Company grants
no other warranty, either express or implied, including without limitation,
warranties or merchantability or fitness for a particular purpose.
Limitation of Liability. Company shall in no event be liable for any indirect,
incidental, special or consequential damages arising out of or relating
to the sale or use of its products, whether or not Company has advance
notice of the possibility of such damages. If company breaches any
provision of this agreement, purchaser’s sole and exclusive maximum
liability, whether based in contract, tort or otherwise, shall not in any
event exceed the contract price for the particular products.
Video Recovery Disclaimer: Purchaser is responsible for maintaining all
evidence and videos taken with Company products. Purchaser
should download all videos from Company products before returning
to Company for repair or
replacement. Purchaser shall indemnify
Company for any evidence or videos that cannot be recovered from
products.
Caution: Risk of explosion or fire if battery is disassembled, punctured,
cut, crushed, short-circuited, incinerated, or exposed to water, fire, or
high temperatures. Properly dispose of used batteries in accordance
with local regulations.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2016:11:22 09:45:04+08:00
Creator                         : Adobe InDesign CS4 (6.0.6)
Modify Date                     : 2017:02:15 08:06:37-08:00
Trapped                         : False
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Metadata Date                   : 2017:02:15 08:06:37-08:00
Creator Tool                    : Adobe InDesign CS4 (6.0.6)
Format                          : application/pdf
Document ID                     : uuid:71f4232e-2c5b-4f04-a33f-417defc9df4a
Instance ID                     : uuid:92d51640-695d-43f2-ad43-bc9486c98863
Producer                        : Adobe PDF Library 9.0
Page Count                      : 2

EXIF Metadata provided by EXIF.tools