Contents
- 1. 2ABBNLE5LIT_Regulatory statements
- 2. 2ABBNLE5LIT_User manual_0405
2ABBNLE5LIT_User manual_0405
LE5 LITE BODY WORN CAMERA LED LIGHTS The LE5 Lite is an easy to operate wearable video camera designed specifically for law enforcement and security professionals. STATUS LIGHT Fast Blink Blue: Solid Red: Solid Blue: Slow Blink Blue: Camera is turning On. Camera is in smartphone mode. Camera will communicate with a smartphone. Camera is recording video and audio. Camera is low on battery power or memory is almost full. Camera is recording video and audio. Camera is not recording. Battery is out of power or memory is full. Camera is installing firmware. Do not turn the camera Off or disconnect it from power or the camera firmware update may fail and cause the camera to become unresponsive. Camera is connected and in queue to download. Camera is downloading video. CHARGING LIGHT Solid Red: Solid Green: Battery is charging. Battery is fully charged. Slow Blink Green: Fast Blink Yellow: Solid Yellow: Slow Blink White: Detailed Specifications Video Resolution Recording Speed Recording Format Lens Field of View Recording Life Storage Capacity Video Storage Weight (no clip) Dimensions (no clip) Input Temperature 1080 (FHD), 720 (HD) or 848x480 (SD) 30 Frames Per Second MPEG-4, H.264 Codec, AVI container 95 degrees (diagonal) Up to 6 hours at SD Resolution* 32 GB (non-removable) 28 hours at SD Resolution* 2.7 oz 2.52” x 2.2” x .95” DC 5V -4°F - 122°F * Environmental conditions may increase or decrease specification NEED HELP? Phone: 888-285-4548 (24/7/365) Email: support@vievu.com Rev2 VIEVU….. 645 Elliott Ave W Ste 370 Seattle WA 98119…. LE5 LITE INSTRUCTIONS FIRST TIME SOFTWARE SETUP 1. SELECT YOUR SOFTWARE Go to www.vievu.com/LE5litesetup and complete the sign-up process. After sign-up is complete, you will receive a welcome email with additional information. CONNECT TO SMARTPHONE WEARING THE CAMERA The camera must be worn with the LED lights facing up. The ideal position to attach the camera is level with the sternum but it will vary depending on the user. HINT: Use the smartphone app to confirm placement on your body. 2. INSTALL SOFTWARE ON COMPUTER The welcome email will contain a link to the software to install. Contact VIEVU at 888-285-4548 if you need assistance. ACTIVATE SMARTPHONE MODE Press and hold the smartphone button on the side of the camera for 3 seconds. The status light will blink blue while activating and change to solid red when complete. You may now connect to the camera using a smartphone. DEACTIVATE SMARTPHONE MODE Press and hold the smartphone button on the side of the camera for 3 seconds. Smartphone mode will turn off. The status light will turn off. 3. ASSIGN CAMERA IN SOFTWARE All cameras must be assigned before use. NOTE: While in smartphone mode, you can switch to recording video by sliding the record switch down. NOTE: Failure to assign the camera will prevent downloading videos. Using the supplied cable, connect the 2 large USB connectors to the computer. Connect the small connector to the bottom of the camera. Click the ‘Assign Camera’ button in the software. For complete steps, consult the User Guides found in the welcome email. The LE5 Lite is designed to turn off between recordings. In order to interact with the camera using a smartphone, the camera needs to be switched into smartphone mode. NOTE: Deactivate smartphone mode as soon as possible for maximum battery life. RECORDING VIDEO DOWNLOADING VIDEO USING THE CAMERA DOWNLOAD WITH CABLE 1. Using the supplied cable, connect the 2 large USB connectors to the computer. Connect the small connector to the bottom of the camera. 2. Login to the VIEVU software and click ‘Download’. Consult the User Guide found at www.vievu.com/support for complete steps. MOUNTING OPTIONS The camera includes one universal attachment clip and one cable. The clip can rotate 360 degrees. The clip locks every 90 degrees, adjust the position by twisting the clip. If the clip becomes loose, you may need to tighten the locking screw using a Philips screwdriver. To maintain compliance with FCC RF exposure guidelines for body worn operation, do not use accessories contain metallic components. START RECORDING 1. Slide the record switch down. 2. The camera will turn on. The status light will blink green while recording. STOP RECORDING 1. Slide the record switch up. 2. The camera will turn off. MULTIDOCK DOWNLOAD Insert the camera into an available port on the MultiDock. The status light will turn blue when the camera is in queue to download. The light will change to blinking blue when video files are being downloaded. The light will turn off when the download process is complete.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Jason Wine Create Date : 2017:03:13 17:12:30+08:00 Modify Date : 2017:03:13 17:12:30+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2017:03:13 17:12:30+08:00 Creator Tool : Adobe Acrobat Pro 9.5.5 Format : application/pdf Title : 11 Creator : Jason Wine Document ID : uuid:01462d3c-f140-4978-a4bd-ac031bfe340b Instance ID : uuid:cdce0d14-34da-4611-9d18-db4bf9cb92c9 Producer : Adobe Acrobat Pro 9.5.5 Page Count : 2 For : vivian, Bounding Box : -12 0 828 432 Container Version : 11 Creator Version : 14EXIF Metadata provided by EXIF.tools