VStarcam Technology WS WiFi Smart Socket User Manual User manual

Shenzhen Vstarcam Technology Co., Ltd. WiFi Smart Socket User manual

User_manual

Wi-Fi Smart Socket User ManaulSwitch functionReset: Connecting socket to power, Long press the switch for3 to 5 seconds until the indicator light flashes ofSwitch on/off the power of socketBacklight indicatorProcessstatusbacklightstatusInternetConnectingSlowly blinking inblue lightWaiting for WiFi configurationFast blinking in blueInternet connection processingStop blinking in blueInternet connection successfulNormalworkingConstantly on in blueInternet connection successful andsocket is power onOff in blueInternet connection fail and socketis power offProduct SetupThe free Eye4Smart App is required to operate your WiFiSmart Socket. There are three options for you to downloadthe Eye4Smart App.Option 1: Go to http://www.eye4smart.com to find theEye4Smart App, download it and register new account.Option 2: Scan the code below to directly download page, andregister new account.Option 3: It’s available on the Appstore and Google Playstorefor Android and iOS devices.(1)Ensure your iOS / Android device is connected to theinternet using a Wi-Fi network.(2) Open the App store/Google Playstore on your phone.(3)Search for “Eye4Smart” in the App store/Google Playstore.(4)Download the Eye4Smart App to your phone.(5)Register new account in Eye4Smart App.Smart Socket ConfigurationBefore you can use your WiFi Smart Socket, it must be setupusing your Android/iOS device. Initial setup must beperformed using your 2.4GHz Wi-Fi network(currently notsupport 5GHz Wi-Fi network). Plug the socket in to ensure itspairing mode (Slowly blinking in blue ligh). If no, please longpress the power-switch button until LED fast blinking to enterpairing mode. Then follow the steps below one by one.Step1：Once connected to your Wi-Fi network, openthe Eye4Smart app. On the Home page, select the “+“icon in the socket section. There are two ways toadd the device.Option 1: “scan to add”Tap the “Scan to add“section at the bottom ofthe screen. Scan the QR code on the socket or onthe QR code card, go to the second step.
Option 2: “others”Select the “others”,then go to “smart socket”button. Follow the steps on screen to the secondstep.Step 2: The connection operation steps of different mobileplatforms are as follows:Input the connectedhome WiFi pass code,then go to next step.Please follow theinstruction shown iniphone,connect theWiFi to@SOCKET_XXXX, thengo back to APP, selectthe home WiFi, inputpass code, then go tonext step.App would go discovering automatically, name the deviceand click “Add it”to the following automatic networking pairingstatus. The smart socket would turn on the APP home page oncebinding successfully.
Manual connectionIf pairing not automatically successful, the “Manualconnection” button would pomp up, and you may click itto turn out phone WiFi setting page. Select the socket hotpot @SOCKET_XXXX, go back to APP to find “Add it” andclick it.Remark: In case binding failure,you will need to checkthe network, default te socket by long pressing thesocket switch till fast blinking in blue,and then repeatthe Connecting to the Eye4Smart App section.Step3：Once pairing successfully, go back to HOME page totest the socket.FCC Warning StatementChanges or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority tooperate the equipment. This equipment has been tested andfound to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interferencein a residential installation. This equipment generates usesand can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may causeharmful interference to radio communications. However,there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmfulinterference to radio or television reception, which can bedetermined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or moreof the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment andreceiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician forhelp.FCC Radiation Exposure StatementThe antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all personsand must not be co-located for operating in conjunction with any other antenna ortransmitter.

Navigation menu