VStarcam Technology WS WiFi Smart Socket User Manual User manual

Download:
Mirror Download [FCC.gov]
Document ID	3963642
Application ID	hvPIDolpQ19ieqn3Q8nTIA==
Document Description	User_manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	31.25kB (390686 bits)
Date Submitted	2018-08-15 00:00:00
Date Available	2018-08-15 00:00:00
Creation Date	2018-07-31 16:54:15
Document Lastmod	2018-07-31 16:54:15
Document Title	User_manual
Document Creator	WPS Office
Document Author:	Yas

Wi-Fi Smart Socket User Manaul
Switch function
Reset: Connecting socket to power, Long press the switch for
3 to 5 seconds until the indicator light flashes of
Switch on/off the power of socket
Backlight indicator
Process
status
Internet
backlight
status
Slowly blinking in
blue light
Waiting for WiFi configuration
Connecting Fast blinking in blue
Internet connection processing
Stop blinking in blue
Internet connection successful
Constantly on in blue
Internet connection successful and
socket is power on
Off in blue
Internet connection fail and socket
is power off
Normal
working
Product Setup
The free Eye4Smart App is required to operate your WiFi
Smart Socket. There are three options for you to download
the Eye4Smart App.
Option 1: Go to http://www.eye4smart.com to find the
Eye4Smart App, download it and register new account.
Option 2: Scan the code below to directly download page, and
register new account.
Option 3: It’s available on the Appstore and Google Playstore
for Android and iOS devices.
(1)Ensure your iOS / Android device is connected to the
internet using a Wi-Fi network.
(2) Open the App store/Google Playstore on your phone.
(3)Search for “Eye4Smart” in the App store/Google Playstore.
(4)Download the Eye4Smart App to your phone.
(5)Register new account in Eye4Smart App.
Smart Socket Configuration
Before you can use your WiFi Smart Socket, it must be setup
using your Android/iOS device. Initial setup must be
performed using your 2.4GHz Wi-Fi network(currently not
support 5GHz Wi-Fi network). Plug the socket in to ensure its
pairing mode (Slowly blinking in blue ligh). If no, please long
press the power-switch button until LED fast blinking to enter
pairing mode. Then follow the steps below one by one.
Step1：Once connected to your Wi-Fi network, open
the Eye4Smart app. On the Home page, select the “+
“ icon in the socket section. There are two ways to
add the device.
Option 1: “scan to add”
Tap the “Scan to add“ section at the bottom of
the screen. Scan the QR code on the socket or on
the QR code card, go to the second step.
Option 2: “others”
Select the “others”,then go to “smart socket”
button. Follow the steps on screen to the second
step.
Step 2: The connection operation steps of different mobile
platforms are as follows:
Input the connected
home WiFi pass code,
then go to next step.
Please follow the
instruction shown in
iphone,connect the
WiFi to
@SOCKET_XXXX, then
go back to APP, select
the home WiFi, input
pass code, then go to
next step.
App would go discovering automatically, name the device
and click “Add it” to the following automatic networking pairing
status. The smart socket would turn on the APP home page once
binding successfully.
Manual connection
If pairing not automatically successful, the “Manual
connection” button would pomp up, and you may click it
to turn out phone WiFi setting page. Select the socket hot
pot @SOCKET_XXXX, go back to APP to find “Add it” and
click it.
Remark: In case binding failure,you will need to check
the network, default te socket by long pressing the
socket switch till fast blinking in blue,and then repeat
the Connecting to the Eye4Smart App section.
Step3：Once pairing successfully, go back to HOME page to
test the socket.
FCC Warning Statement
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment. This equipment has been tested and
found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to pr
ovide a separation distance of at least 20 cm from all persons
and must not be colocated for operating in conjunction with any other antenna or
transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 3
Author                          : Yas
Comments                        : 
Company                         : 
Create Date                     : 2018:07:31 16:54:15+08:54
Creator                         : WPS Office
Modify Date                     : 2018:07:31 16:54:15+08:54
Producer                        : 
Source Modified                 : D:20180731165415+08'54'
Subject                         : 
Title                           : 
Trapped                         : false

EXIF Metadata provided by EXIF.tools