VTech Telecommunications 80-0765-00 DECT 6.0 Corded/Cordless Phone - Base Unit User Manual manual

VTech Telecommunications Ltd DECT 6.0 Corded/Cordless Phone - Base Unit manual

User Manual

Complete user’s manualCL84107/CL84207/CL84257/CL84307/CL84357DECT 6.0 corded/cordless telephone/answering system with caller ID/call waitingBC
Congratulationson your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information section on pages 142-143 of this manual. Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.This telephone meets the California Energy Commission regulations for energy consumption. Your telephone is set up to comply with the energy-conserving standards right out of the box. No further action is necessary.This telephone system is compatible with certain AT&T DECT 6.0 cordless headsets and speakerphones. Visit www.telephones.att.com/accessories for a list of compatible cordless headsets and speakerphones. Model number: CL84107 (one handset) CL84207/CL84257 (two handsets) CL84307/CL84357 (three handsets)Type: DECT 6.0 corded/cordless telephone/answering system with caller ID/call waitingSerial number: ________________________________________________________Purchase date: _______________________________________________________Place of purchase: ____________________________________________________________Both the model and serial numbers of your AT&T product can be found on the bottom of the telephone base. Save your sales receipt and original packaging in case it is necessary to return your telephone for warranty service. ¸¿¸Ã»ÂÁ¸Æ¼·¸ÁǼ踷ʼǻÇ»¼Æ¿ÂºÂ»´É¸Ÿ·È¶¸·Á¼Ƹ´Á·¼ÁǸŹ¸Å¸Á¶¸when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license.© 2017 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China.The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR® label indicating it meets the ¿´Ç¸ÆÇ¸Á¸ÅºÌ¸ï¶¼¸Á¶ÌºÈ¼·¸¿¼Á¸Æ
Parts checklistYour telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.Quick start guideAbridgeduser’s manualAbridged user’s manualCL84107/CL84207/CL84257/CL84307/CL84357DECT 6.0 corded/cordless telephone/answering system with caller ID/call waitingTelephone line cordPower adapter for telephone baseTelephone base Corded handset with coiled handset cord attachedCordless handset(1 for CL84107)(2 for CL84207/CL84257)(3 for CL84307/CL84357)Charger for cordless handset with power adapter installed (1 for CL84107)(2 for CL84207/CL84257)(3 for CL84307/CL84357)Battery for cordless handset(1 for CL84107)(2 for CL84207/CL84257)(3 for CL84307/CL84357)THIS SIDE UP / CE CÔTÉ VERS LE HAUTBattery Pack / Bloc-piles :BT183342/BT283342 (2.4V 400mAh Ni-MH)WARNING / AVERTISSEMENT :DO NOT BURN OR PUNCTURE BATTERIES.NE PAS INCINÉRER OU PERCER LES PILES.Made in China / Fabriqué en chine CR1349Battery compartment cover (1 for CL84107)(2 for CL84207/CL84257)(3 for CL84307/CL84357)CL84107/CL84207/CL84257/CL84307/CL84357Quick start guide
Complete user’s manualCL84107/CL84207/CL84257/CL84307/CL84357DECT 6.0 corded/cordless telephone/ answering system with caller ID/call waitingTable of contentsGetting startedQuick reference guide - handset......... 1Quick reference guide - telephone base.................................................................. 4Installation ......................................................... 8Telephone base and charger installation................................................... 9Battery installation and charging .... 10Line power mode (no AC power)...... 14To make a call during a power failure ......................................................... 14To answer a call during a power failure ......................................................... 14Installation options.....................................15Tabletop to wall-mount installation...............................................15Wall-mount to tabletop installation...............................................17Telephone settingsHandset settings ......................................... 19Ringer volume.........................................20Ringer tone................................................20Set date/time...........................................21LCD language...........................................22Caller ID announce...............................23Set speed dial voicemailnumber .....................................................24Voicemail (visual message waiting) indicator...................................................24Clear voicemail indicator .................25Rename handset .................................26Key tone ......................................................26Use caller ID to automatically set date and time...............................27Home area code .................................... 27Dial mode ...................................................28Web address.............................................28QUIET mode..............................................29Telephone base settings........................30Ringer volume..........................................31Ringer tone.................................................31Set date/time.......................................... 32LCD language...........................................33Caller ID announce...............................34Set speed dial voicemail number .....................................................35Voicemail (visual message waiting) indicator...............................35Clear voicemail indicator ................36Rename base ...........................................36Key tone ...................................................... 37Use caller ID to automatically set date and time............................... 37Home area code ....................................38Dial mode ...................................................39Web address.............................................39Telephone operationTelephone operation ............................... 40Making a call............................................ 40On hook dialing (predialing)......... 40Answering a call .................................... 40Ending a call.............................................. 41ÈÇÂÂæ........................................................ 41Temporary ringer silencing............ 41Handset speakerphone ....................42Last number redial...............................42Equalizer......................................................43
Options while on calls ............................. 44Volume control...................................... 44Call waiting............................................... 44Mute.............................................................. 44Chain dialing .............................................45Temporary tone dialing ................... 46Blind transfer ...........................................47Multiple handset useMultiple handset use................................ 49Handset locator .................................... 49Join a call in progress........................ 49Intercom............................................................50Answer an incoming call during an intercom call...................51Call transfer using intercom ................ 52Push-to-talk (PTT)...................................... 53ÈÅÁ©ÂÁÂÅÂæ ................................53PTT call to a single device...............54PTT call to multiple devices...........56Answer a PTT call.................................. 57Change a one-to-one PTT call to an intercom call ............................ 57Answer an incoming call during a PTT call .................................58Make an outgoing call during a PTT call .................................58End or leave a PTT call.......................58DirectoryAbout the directory...................................59Shared directory....................................59Capacity.......................................................59Create directory entries.........................60Create a new directory entry........60Add a predialed telephone number to the directory............... 61Review the directory.................................62Review directory entries..................62Search by name .....................................63Dial, delete or edit directory entries.......................................................... 64Display dial................................................ 64Delete a directory entry.................. 64Edit a directory entry .........................65Speed dial.........................................................66Assign a speed dial number...........66Reassign a speed dial number .....67Assign your speed dial voicemail number..............................67Delete a speed dial number...........68Make a call using speed dial...........68Check your voicemail using speed dial ................................................68Caller IDAbout caller ID...............................................69Information about caller ID with call waiting ..................................69Caller ID log .....................................................70How the caller ID log works ...........70Missed (new) call indicator.............70Caller ID operation.......................................71Memory match........................................71Review the caller ID log..................... 72View dialing options............................ 73Dial a caller ID log entry.................... 73Delete caller ID log entries ............. 73Save a caller ID log entry to the directory...................................74Reasons for missing caller ID information ............................................... 75Smart call blockerAbout Smart call blocker.......................76Call categories ........................................76About Smart call blocker....................... 77Call controls.............................................. 77Call block settings.......................................78¬¸Ç¬À´ÅÇ¶´¿¿µ¿Â¶¾¸ÅÂÁÂæ .......78Control calls without numbers....78Control other calls................................79Block list ......................................................79Allow list ......................................................83Star name list...........................................87Screening announcement ..............89Allowed calls ................................................... 91Allow calls without numbers......... 91Allow other calls..................................... 91Blocked calls...................................................92Block calls without numbers.........92Block other calls.....................................92Screen calls without numbers............93Accept call once.....................................93
Send call to answering system...................................................... 94End call ........................................................ 94Screen other calls .......................................95Accept call once.....................................96Always accept..........................................96Block call .....................................................97Send call to answering system.......................................................97Answering systemAnswering system settings..................99Announcement.......................................99ÁÆʸÅÂÁÂæ .......................................102Voice guide..............................................103Call screening........................................104Number of rings...................................105Remote access code........................ 106Message alert tone............................107Message recording time ............... 108About the answering system........... 109Answering system and voicemail indicators...................... 109Using the answering system and voicemail together.............. 109Message capacity ...............................110Voice prompts.......................................110Call screening.........................................110Call intercept...........................................111Base ringer................................................111¸ÀÃÂŴż¿ÌÇÈÅÁ¼ÁºÂæÇ»¸message alert tone .........................111Message playback..................................... 112Options during playback................ 113Delete all old messages..................114Recording and playing memos ........ 115Record a memo.................................... 115Play back a memo .............................. 115Base message counter displays......116Message counter displays............. 116Remote access.............................................117AppendixAdding and registering handsets/headsets/speakerphones.............119Register a handset to the telephone base.................................. 119Deregistering handsets ........................120Deregister all handsets from the telephone base ........................120Alert tones and lights............................. 121Handset screen icons....................... 121Telephone base screen icons...... 121Handset alert tones ..........................122Telephone base alert tones.........122Lights...........................................................123Screen display messages.....................124Troubleshooting.........................................127Maintenance.................................................136Important safety information.......... 137Especially about cordless telephones............................................138Precautions for users of implanted cardiac pacemakers .........................................138Pacemaker patients..........................138ECO mode................................................138Especially about telephone answering systems.........................138FCC Part 68 and ACTA............................139FCC Part 15 .................................................... 140California Energy Commission battery charging testing instructions ............................................. 141Limited warranty .......................................142¸¶»Á¼¶´¿Æø¶¼è¶´Ç¼ÂÁÆ.......................144DECT 6.0 digital technology........ 144Telephone operating range........144«¸·¸èÁ¼Áº¿ÂÁºÅ´Áº¸coverage and clarity ..................... 144HD audio................................................... 144Simulated full-duplex handset speakerphone ...................................144IndexIndex...................................................................145
1TONE /a>Af Press to switch to tone dialing temporarily during a call if you have pulse service (page 45).f While entering names, press to change the next letter to upper or lower case.Quick reference guide - handsetOFF/CANCELf During a call, press to hang up (page 40).f While in a menu, press to cancel an operation, back up to the previous menu, or exit the menu display; or press and hold this button to exit to idle mode.f When the handset is ringing, press to mute the ringer temporarily (page 40).f Press and hold while the telephone is not in use to erase the missed call indicator.REDIAL/PAUSEf Press repeatedly to view the last 10 numbers dialed (page 41).f While entering numbers, press and holdto insert a dialing pause. 1f While reviewing a caller ID log entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it (page 72).f Press and hold to set (page 23) or dial your voicemail number (page 67).PHONE/FLASHf Press to make or answer a call (page 39).f During a call, press to answer an incoming call when you receive a call waiting alert (page 43).f During message playback, press to call back the caller if the caller’s number is available (page 118).Getting startedCHARGE indicatorf On when the handset is charging in the charger. MENU/SELECTf When the handset is not in use, press to show the menu. f While in the menu, press to select an item or save an entry or setting.PUSH TO TALKf Press to initiate a one-to-one (page 53) or one-to-group broadcast (page 55).f Press and hold to broadcast to a group of system devices (page 55).
Getting started2Quick reference guide - handsetTCID/VOLUMEf Press TCID to show caller ID log when the handset is not in use (page 71).f Press to scroll down while in menus.f While entering names or numbers, ßÆÆÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìf Press to decrease the listening volume when on a call (page 43), or to decrease the message playback volume (page 118)./SPEAKERf Press to make or answer a call using the speakerphone (page 39).f Press to switch between the speakerphone and the handset (page 39).QUIET# (pound key)f Press repeatedly to display other dialing options when reviewing a caller ID log entry (page 71).f Press and hold to enter the QUIET mode setting screen, or to deactivate QUIETmode (page 28).SDIR/VOLUMEf Press SDIR to show directory entries when the handset is not in use (page 61).f Press to scroll up while in menus.f While entering names or numbers, press to move the cursor to the right. f Press to increase the listening volume when on a call (page 43), or to increase the message playback volume (page 118).MUTE/DELETEf During a call, press to mute the microphone (page 44).f When the handset is ringing, press to mute the ringer temporarily (page 40).f While reviewing the caller ID log, directory, redial memory, block list, allow list or star name list, press to delete an individual entry (page 71, page 61, page 41 and page 88, espectively).f While predialing, press to delete digits (page 39).f During message or announcement playback, press to delete the playing message or the recorded announcement (page 118 and page 106, respectively).CALL BLOCKf Press to block the incoming call when the telephone is ringing or during the call (page 39).f When the handset is not in use, press to show the Smart call blocker menu (page 80).
Getting started3Quick reference guide - handsetMain menu• Play messages (page 117)• Answering sys (page 104)• Smart call blk (page 77)• Directory (page 58)• Caller ID log (page 69)• Intercom (page 49)• Ringers (page 19)• Set date/time (page 20)• Settings (page 18)• Web address (page 27)Using menus:f Press MENU/SELECT to show the menu.f Press TCID or SDIR to scroll through menu items.f Press MENU/SELECTÇÂ¶ÂÁèÅÀÂÅƴɸ¶»´Áº¸ÆÇÂ´»¼º»¿¼º»Ç¸·À¸ÁÈ¼Ç¸Àf Press OFF/CANCEL to cancel an operation, back up to the previous menu, or exit the menu display.The > symbol highlights a menu item.Main menu>Play messagesAnswering sys
Getting started4Quick reference guide - telephone base FLASH/PTTf Press to initiate a one-to-one (page 53) or one-to-group broadcast (page 55).f Press and hold to broadcast to a group of system devices (page 55).f During a call, press to answer an incoming call when you receive a call waiting alert (page 43).CANCELf While in a menu, press to cancel an operation, back up to the previous menu, or exit the menu display; or press and hold to exit to idle mode.f When the telephone base is ringing, press to mute the ringer temporarily (page 40).f Press and hold while the telephone is not in use to erase the missed call indicator. CALL BLOCKf Press to block the incoming call when the telephone is ringing or during the call (page 76).f When the telephone base is not in use, press to show the Smart call blocker menu (page 78).REDIAL/PAUSEf Press repeatedly to view the last 10 numbers dialed (page 41).f While entering numbers, press and hold to insert a dialing pause. /ANS ON/OFFf Press to turn the built-in answering ÆÌÆǸÀÂÁÂÅÂæôº¸#SDIRf Press SDIR to show directory entries when the telephone is not in use (page 61).f Press to scroll up while in menus and lists.f While entering names or numbers, press to move the cursor to the right. TCIDf Press TCID to show caller ID log when the telephone is not in use (page 71).f Press to scroll down while in menus and lists.f While entering names or numbers, ßÆÆÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìMENU/SELECTf When the telephone is not in use, press to show the menu. f While in the menu, press to select an item or save an entry or setting.
Getting started5Quick reference guide - telephone baseSKIPf Press to skip a message (page 118)./PLAY/STOPf Press to start or stop message playback (page 118)./REPEATf During playback, press to repeat the playing message (page 118).f During playback, press twice to play the previous message (page 118)./SPEAKERf Press to make or answer a call using the speakerphone (page 39).MUTE/DELETEf During a call, press to mute the microphone (page 44).f When the telephone is ringing, press to mute the ringer temporarily (page 40).f While reviewing the caller ID log, directory, redial memory, block list, allow list or star name list, press to delete an individual entry.f While predialing, press to delete digits.f During message or announcement playback, press to delete the playing message or announcement.f Press twice to delete all old messages when the telephone is not in use (page 119).MICf Microphone.1f Press and hold to set (page 34) or to dial your voicemail number (page 67).QUIET# (pound key)f Press repeatedly to display other dialing options when reviewing a caller ID log entry (page 72).f Press and hold to enter the QUIETmode setting screen, or to deactivate QUIET mode (page 28).TONE /a>Af Press to switch to tone dialing temporarily during a call if you have pulse service (page 45).f While entering names, press to change the next letter to upper or lower case.
Getting started6Quick reference guide - telephone baseSVOL/TVOLf During message playback or call screening, press to adjust the listening volume (page 118).f While in idle mode, press to adjust the base ringer volume.f When on a call, press to adjust the listening volume./FIND HSf While the telephone is idle, press to page all handsets (page 48).IN USE indicatorf On when the telephone is in use, or when the answering system is answering an incoming call.f On when a handset is being registered.f Flashes when there is an incoming call or when all handsets are being deregistered. f Flashes when another telephone is in use on the same line.
Getting started7Main menu• Play messages (page 117)• Answering sys (page 104)• Smart call blk (page 77)• Directory (page 58)• Caller ID log (page 69)• Intercom (page 49)• Ringers (page 30)• Set date/time (page 31)• Settings (page 29)• Web address (page 38)The > symbol highlights a menu item.>Play messages Answering sysSTMain menuUsing menus:f Press MENU/SELECT to show the menu.f Press TCID or SDIR to scroll through menu items.f Press MENU/SELECTÇÂ¶ÂÁèÅÀÂÅƴɸ¶»´Áº¸ÆÇÂ´»¼º»¿¼º»Ç¸·À¸ÁÈ¼Ç¸Àf Press CANCEL to cancel an operation, back up to the previous menu, or exit the menu display.Quick reference guide - telephone base
Getting started8See pages 7-8 for easy instructions.You must install and charge the battery before using the telephone. STOP!Install the telephone base close to a telephone jack and a power outlet not ¶ÂÁÇÅ¿¿¸·µÌ´Ê´¿¿ÆʼǶ»»¸Ǹ¿¸Ã»ÂÁ¸µ´Æ¸¶´Áµ¸ÿ´¶¸·ÂÁ´ë´ÇÆÈŹ´¶¸or vertically mounted on the wall (see page 14). For optimum range and better reception, place the telephone base in a central and open location.If you subscribe to high-speed Internet service (DSL - digital subscriber ¿¼Á¸Ç»ÅÂȺ»ÌÂÈÅǸ¿¸Ã»ÂÁ¸¿¼Á¸ÌÂÈÀÈÆÇ¼ÁÆÇ´¿¿´¬¥è¿Ç¸Åµ¸Çʸ¸ÁÇ»¸telephone line cord and the telephone wall jack (see the following page). The è¿Ç¸ÅßɸÁÇÆÁ¼Ƹ´Á·¶´¿¿¸Å¢Ãŵ¿¸ÀÆ¶´ÈƸ·µÌ¬¥¼ÁǸŹ¸Å¸Á¶¸©¿¸´Æ¸¶ÂÁÇ´¶ÇÌÂÈÅ¬¥ƸÅɼ¶¸ÃÅÂɼ·¸Å¹ÂÅÀŸ¼Á¹ÂÅÀ´Ç¼ÂÁ´µÂÈÇ¬¥è¿Ç¸ÅÆYour product may be shipped with protective stickers covering the handset and telephone base displays - remove them before use.For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.Avoid placing the telephone base and charger too close to:f Communication devices such as television sets, VCRs, or other cordless telephones.f Excessive heat sources.f §Â¼Æ¸ÆÂÈŶ¸ÆÆȶ»´Æ´ʼÁ·ÂÊʼǻÇÅ´ï¶ÂÈÇƼ·¸ÀÂÇÂÅÆÀ¼¶ÅÂʴɸÂɸÁÆŸ¹Å¼º¸Å´ÇÂÅÆÂÅëÈŸƶ¸ÁÇ¿¼º»Ç¼Áºf Excessive dust sources such as a workshop or garage.f Excessive moisture.f Extremely low temperature.f Mechanical vibration or shock such as on top of a washing machine or workbench.Installation
Getting started9Telephone base and charger installationInstall the telephone base and charger, as shown below.The telephone base is ready for tabletop use. If you want to change to wall-mounting, see Installation options on page 14 for details.IMPORTANT INFORMATION• Use only the power adapter(s) supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com or call1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.•»¸ÃÂʸÅ´·´ÃǸÅÆ´Å¸¼ÁǸÁ·¸·ÇÂµ¸¶ÂÅŸ¶Ç¿ÌÂż¸ÁǸ·¼Á´ɸÅǼ¶´¿ÂÅëÂÂÅmount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.Telephone base installationCharger installationPlug the large end of the telephone base power adapter into a power outlet not controlled by a wall switch.Plug one end of the telephone line cord into a telephone jack ÂÅ´¬¥è¿Ç¸ÅIf you have DSL high-speed ¢ÁǸÅÁ¸ÇƸÅɼ¶¸´¬¥è¿Ç¸Å(not included) is required.Route the telephone line cord through this slot.Plug the other end of the telephone line cord into the telephone jack on the back of the telephone base.Plug the small end of the telephone base power adapter into the power adapter jack on the back of the telephone base.Route the power adapter cord through this slot.Raise the antenna.Plug the power adapter into a power outlet not controlled by a wall switch.
Getting started10Battery installation and chargingInstall the battery, as shown below. Once you have installed the battery, the screen indicates the battery status (see the following table). If necessary, place the handset in its charger to charge the battery. For best performance, keep the handset in the charger when not in use. The battery is fully charged ´ì¸Å»ÂÈÅÆ¹¶ÂÁǼÁÈÂÈÆ¶»´Åº¼Áº¬¸¸Ç»¸Ç´µ¿¸ÂÁôº¸ %¹ÂÅµ´ÇǸÅÌoperating times.If the screen shows Place in charger and ë´Æ»¸Æ, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time. The following table summarizes the battery charge indicators and actions to take.Battery indicators Battery status ActionThe screen is blank, or shows Place in charger and ë´Æ»¼ÁºBattery has no or very little charge. The handset cannot be used.Charge without interruption(at least 30 minutes).The screen shows Low battery andë´Æ»¼ÁºBattery has enough charge to be used for a short time.Charge without interruption(at least 30 minutes).The screen shows HANDSET X.Battery is charged. To keep the battery charged, place the handset in the charger when not in use.Step 1Plug the battery connector securely into the socket inside the handset battery compartment. Insert the supplied battery with the label THIS SIDE UP facing up, as indicated.Note: If you are on a phone call in low battery mode, you hear four short beeps every minute. THIS SIDE UP / CE CÔTÉVERS LE HAUTBattery Pack / Bloc-piles :BT183342/BT283342 (2.4V 400mAh Ni-MH)WARNING / AVERTISSEMENT:DO NOT BURN OR PUNCTURE BATTERIES.NE PAS INCINÉRER OU PERCER LES PILES.Made in China / Fabriqué en chine CR1349THIS SIDE UP
Getting started11Battery installation and chargingStep 3Charge the handset by placing it face forward in the charger. The CHARGE light on the top of the handset is on during charging.IMPORTANT INFORMATION• Use only the supplied rechargeable battery or replacement battery (model BT183342/BT283342).To order, visit our website at www.telephones.att.com or call1 (800) 222-3111.In Canada, dial 1 (866) 288-4268.• If you do not use the handset for a long time, disconnect and remove the battery to prevent possible leakage.ì¸ÅÌÂÈ¼ÁÆÇ´¿¿ÌÂÈÅǸ¿¸Ã»ÂÁ¸ÂÅÃÂʸÅŸÇÈÅÁÆ¹Â¿¿ÂʼÁºa power outage, the handset and base will prompt you to set the date and time. For instructions on setting the date and time using a cordless handset or the telephone base, see Set date/time on page 20 and page 31, respectively. To skip setting the date and time, press OFF/CANCEL on a cordless handset or CANCEL on the telephone base.Step 2¿¼ºÁÇ»¸¶ÂɸÅë´Ç´º´¼ÁÆÇÇ»¸µ´ÇǸÅÌ¶ÂÀôÅÇÀ¸ÁÇÇ»¸ÁÆ¿¼·¸¼ÇÈÃÊ´Å·Æuntil it clicks into place.SET DATEMM/DD/YYSET TIMEHH:MM --ÔTÉVERS LE HAUT:2.4V 400mAh Ni-MH)MENT:URE BATTERIES.CER LES PILES.ine CR1349
Getting started12Battery installation and chargingì¸ÅÇ»¸·´Ç¸´Á·ǼÀ¸ƸÇǼÁº¼Æ·ÂÁ¸ÂÅƾ¼Ãø·Ç»¸telephone base then prompts if you want to set Smart call blocker. Press MENU/SELECT to start the Smart call blocker setup via voice guide. To skip the setup, press CANCELon the telephone base. For more details, see Smart call blocker on page 67.Voice guide to set Smart call blocker:If you choose to set Smart call blocker via voice guide, you hear a voice prompt, “Hello! This voice guide will assist you with the basic setup of Smart call blocker...”. Listen to the instructions and then choose one of the following options.On the telephone base:f Press 1¼¹ÌÂÈÊ´ÁÇÇÂÇÈÅÁÂæ·¸¹´È¿Ç¶´¿¿ƶŸ¸Á¼ÁºƸÇǼÁºÆ´Á·´¿¿ÂÊ´¿¿incoming calls to get through;f Press 2 if you want to screen calls with telephone numbers that are not saved in your directory, allow list and star name list; orf Press 3 if you only want to screen calls that do not display a phone number.If you select option 2 to screen all incoming calls, we recommend that you add the phone numbers of your family members and friends, and desired businesses to your Directory (see page 46) or Allow list (see page 76), or add their names to the Star name list (see page 82). This will avoid Smart call blocker to screen their calls.ì¸ÅÇ»¸¬À´ÅÇ¶´¿¿µ¿Â¶¾¸ÅƸÇǼÁº¼Æ·ÂÁ¸ÂÅƾ¼Ãø·the telephone base will prompt if you want to set up the answering system. Press MENU/SELECT to start the answering system setup via voice guide. For more details, see Voice guide on page 103. To skip the setup, press CANCEL on the telephone base.Voice guide setSmart call blk?Setting upSmart call blk...Voice guide toset up Ans sys?Note: Voice guides to set Smart call blocker and answering system are only available on the telephone base.
Getting started13Line power mode (no AC power)This telephone provides minimal functionality during a power failure. When AC power is not available, the screen is blank and many telephone features do not function. Only touch-tone dialing and corded handset volume adjustment are supported. The telephone uses power from the telephone line to enable you to make and answer calls using the corded handset and dialing keys.ì¸ÅÌÂÈ¼ÁÆÇ´¿¿ÌÂÈÅǸ¿¸Ã»ÂÁ¸ÂÅÇ»¸ÃÂʸÅŸÇÈÅÁÆ¹Â¿¿ÂʼÁº´ÃÂʸÅoutage, the telephone base or cordless handset will prompt you to set the date and time. For instructions, see Set date/time on page 20 and page 31 for details. To skip setting the date and time, press OFF/CANCEL on a cordless handset or CANCEL on the telephone base.To make a call during a power failure1. ¥¼ìÇ»¸¶ÂÅ·¸·»´Á·Æ¸Ç´Á·Ê´¼Ç¹ÂÅ´·¼´¿ÇÂÁ¸»¸ƶŸ¸Á·¼Æÿ´ÌÆBase Check AC power.2. Slowly dial a telephone number using the dialing keys. Wait to hear each key tone upon inputting a digit before pressing the next dialing key.To answer a call during a power failuref ¥¼ìÇ»¸¶ÂÅ·¸·»´Á·Æ¸ÇNote: The screen does not show incoming caller ID information during a power failure.
Getting started14Installation optionsThe telephone base comes with a mount bracket set for tabletop use. If you want to mount your telephone on a wall, rotate the mount bracket down so the telephone can connect with a standard dual-stud telephone wall-mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronics retailers. You might need a professional to install the mounting plate. Tabletop to wall-mount installationTo install the telephone base in the wall-mount position, make sure that you èÅÆÇÈÁÿȺÇ»¸Ǹ¿¸Ã»ÂÁ¸¿¼Á¸¶ÂÅ·´Á·ÃÂʸÅ´·´ÃǸÅ¹ÅÂÀÇ»¸Ǹ¿¸Ã»ÂÁ¸wall jack and power outlet. Make sure they are plugged into their jacks on the telephone base and routed through the channels. 1. Pull the integrated wall-mount bracket and release it from the tabletop orientation, as shown below. Rotate it down into wall-mount position and then push it into the telephone base until it clicks into place.Rear viewWall-mount
Getting started15Installation options3. If necessary, bundle the telephone cord and power adapter cord, and secure them with twist ties. Plug the power adapter and telephone line into the wall outlets. 4. Align the mounting studs on the mounting plate with the mounting holes on the bracket and press the telephone base down until it clicks securely into place.2. Slide the handset tab upward. Rotate the handset tab by 180 degrees. The protruding edge of the handset tab holds the corded handset in place when the telephone is mounted on the wall.Handset tabSwitch hook
Getting started16Installation optionsWall-mount to tabletop installationTo change the telephone base from the wall-mount position to tabletop position:1. Remove the telephone base from the wall. 2. If necessary, untie the bundled telephone cord and power adapter cord. Make sure that you unplug the power adapter and telephone line cord from the wall outlets before you begin.3. Push, as indicated by arrows in the illustration, until the bracket is released, and then rotate it upward until it clicks into the tabletop position. TabletopWall-mountSide viewRear view
Getting started17Installation options5. Make sure the telephone line cord and power adapter cord are securely plugged into their jacks on the back of the telephone base. Plug the power adapter and telephone line into the wall outlets.4. Slide the handset tab upward. Rotate the handset tab by 180 degrees.Handset tabSwitch hook
18Handset settingsUse the menu to change the telephone settings. 1. Press MENU/SELECT on the handset when it is not in use to enter the main menu.2. Press TCID or SDIR to scroll to the feature to be changed. When scrolling through the menu, the > symbol indicates the selected menu item.3. Press MENU/SELECT to select the highlighted item.Note: Press OFF/CANCEL to cancel an operation, back up to the previous menu or exit the menu display. Press and hold OFF/CANCEL to return to idle mode.Go to Answering system settings starting on page 104 for instructions on how to use a system handset to modify the answering system settings, as shown below.Setting PageAnnouncement (play, record and delete) 104-106ÁÆʸÅÂÁÂæ 107Call screening 115Number of rings 110Remote access code 111Message alert tone 112Message recording time 113Telephone settings>Play messagesAnswering sys
19Telephone settingsHandset settingsRinger volumeYou can set the ringer volume level to one of six levels or ÇÈÅÁÇ»¸żÁº¸ÅÂæ°»¸ÁÇ»¸żÁº¸Å¼ÆÂæ appears on the screen.1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Ringers, then pressMENU/SELECT.3. Press MENU/SELECT again to select Ringer volume.4. Press TCID or SDIR to sample each volume level.5. Press MENU/SELECT to save your preference. There is ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸ƶŸ¸ÁŸÇÈÅÁÆÇÂÇ»¸previous menu.Notes:f The handset ringer volume also determines the ringer volume for intercom calls.f If the ringer volume is set to off, that handset is silenced for all incoming calls. However, the handset still plays the paging tone when responding to the handset locator.f If the ringer volume is set to off, the caller ID will not be announced and the screen will briefly display Caller ID won’t be announced.Ringer toneYou can choose one of ten ringer tones.1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Ringers, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Ringer tone, then pressMENU/SELECT.4. Press TCID or SDIR to sample each ringer tone.5. Press MENU/SELECT to save your preference. There is a confirmation tone and the screen returns to the previous menu.Note: If you turn off the ringer volume, you will not hear ringer tone samples.>Ringer volumeRinger tone>RingersIntercomRINGER VOLUMERINGER TONE>Tone 1>Ringer toneRinger volume
Telephone settings20Handset settingsSet date/timeThe answering system announces the day and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. The year must be set so that the day of the week can be calculated from the caller ID information. You can turn ÂæÇ»¸·´Ç¸´Á·ǼÀ¸ƸÇǼÁºÆ¹Ç»¸¶´¿¿¸Å¢ƸÅɼ¶¸´Á·ƸÇÇ»¸·´Ç¸´Á·time manually (see Use caller ID to automatically set date and time on page 26).ì¸Å´ÃÂʸÅ¹´¼¿ÈŸÂÅ»´Á·Æ¸ÇŸº¼ÆÇŴǼÂÁÇ»¸ÆÌÆǸÀÃÅÂÀÃÇÆÌÂÈÇÂƸÇthe date and time. To set the date and time manually:1. When the handset is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Set date/time and then press MENU/SELECT.3. Press TCID or SDIR to select the month, then press MENU/SELECT, or enter the number using the dialing keys.4. Press TCID or SDIR to select the day, then press MENU/SELECT, or enter the number using the dialing keys.5. Press TCID or SDIR to select the year, or enter the number using the dialing keys, then press MENU/SELECT to move on to set the time.6. Press TCID or SDIR to select the hour, then press MENU/SELECT, or enter the number using the dialing keys.7. Press TCID or SDIR to select the minute, then press MENU/SELECT, or enter the number using the dialing keys.8. Press TCID or SDIR to highlight AM or PM, or press 2 for AM or 7 for PM. Then, press MENU/SELECTÇÂ¶ÂÁèÅÀ»¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁtone and the screen returns to the previous menu. Note: If the clock is not set when a message is recorded, the system announces, “Time and day not set,” before it plays the message.SET DATEMM/DD/YYSET TIMEHH:MM -- Ringers>Set date/time
21Telephone settingsHandset settingsLCD languageYou can select the language used for all screen displays. 1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press MENU/SELECT to choose LCD language.4. Press TCID or SDIR to highlight English,Françaisor Español, then press MENU/SELECT. The screen prompts Set English/ Français/ Español as LCD language?.5. Press MENU/SELECTÇÂ¶ÂÁèÅÀ»¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁtone and the screen returns to the previous menu.Note: If you accidentally change the LCD language to French or Spanish, you can reset it back to English without going through the French or Spanish menus. When in idle mode, press MENU/SELECT once on the handset, then enter 364#. There is a confirmation tone.LCD LANGUAGE>EnglishSet Francais asLCD language?
Telephone settings22Handset settingsCaller ID announceThe caller ID announce feature lets you know who’s calling without having to look at the display. When you have an incoming call, the handset and/or base speaks “Call from...” and the name of the caller based on the directory or caller ID information. If the caller’s name is private or unknown, the phone number up to the last 11 digits will be announced. If the caller’s phone number is also private or unknown, no information will be announced. The default setting is On.ÂÇÈÅÁÂÁÂÅÂæÇ»¸¶´¿¿¸Å¢´ÁÁÂÈÁ¶¸¹¸´ÇÈŸ1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Caller ID annc, then press MENU/SELECT.4. Press TCID or SDIR to scroll to the desired option, then press MENU/SELECT.f ¬¸Ç´¿¿¨Á¨æ - Change the setting for the base and all handsets.f Local handset - Change the setting for that handset only (when programming from a cordless handset only).f Base - Change the setting for the telephone base only.5. Press TCID or SDIR to highlight On or Off, then press MENU/SELECT. There is a confirmation tone and the screen returns to the previous menu. If you change the setting for ¬¸Ç´¿¿¨Á¨æ,the screen shows CID Annc ON/OFF on all HS & BS.Notes: f To use the caller ID announce feature, you must subscribe to caller ID service from your telephone service provider.f If you have paired an AT&T TL80133 DECT 6.0 cordless speakerphone to the telephone base, the caller ID announce setting for all devices also applies to the cordless speakerphone. When the setting is On, the cordless speakerphone speaks “Call from...” and the name of the caller based on the directory or caller ID information during an incoming call. If the caller’s name is unavailable, the phone number up to the last 11 digits will be announced.f When there are up to five handsets registered, the telephone system supports caller ID announce for all handsets. If six or more handsets are registered, the system supports caller ID announce for the first four registered handsets only.f This feature does not announce information for call waiting calls.f It takes at least 2 rings for the phone to receive caller ID information and announce it. If the phone is answered before the end of the second ring, the phone won’t have time to announce the caller’s information.f Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.f Caller ID announce is available in English only.HS CID ANNOUNCE>OnCALLER ID ANNC>Local handset LCD language>Caller ID annc
23Telephone settingsHandset settingsSet speed dial voicemail numberThis feature lets you save your voicemail number for easy access when you press and hold the 1key.To save your voicemail number:1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Voicemail #, then press MENU/SELECT.4. Press the dialing keys to enter the voicemail access number provided by your telephone service provider (up to 30 digits).f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìor right.f Press MUTE/DELETE to erase a digit.f Press and hold MUTE/DELETE to erase all digits.f Press REDIAL/PAUSE to enter a three-second dialing pause (a p appears).5. Press MENU/SELECTÇÂƴɸ»¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸»¸ƶŸ¸Ádisplays Voicemail # saved, and then returns to the previous menu.Voicemail (visual message waiting) indicator¢¹ÌÂÈÆȵƶżµ¸ÇÂ´ɼ¶¸À´¼¿ƸÅɼ¶¸Âæ¸Å¸·µÌÌÂÈÅtelephone service provider, this feature provides a visual indication when you have new voicemail messages. New voicemail and the icon appear on the handset screen.Notes:f This feature does not indicate new messages recorded on your phone’s built-in answering system.f For more information about the difference between your answering system and voicemail, see page 114.Caller ID annc>Voicemail #VOICEMAIL #800-222-3111_Voicemail #savedAMHANDSET 1New voicemail10:21PM 2/11
Telephone settings24Clear voicemail indicatorUse this feature when the telephone indicates there is new voicemail but there is none. For example, when you have accessed your voicemail while ´Ê´Ì¹ÅÂÀ»ÂÀ¸»¼Æ¹¸´ÇÈŸÂÁ¿ÌÇÈÅÁÆÂæÇ»¸·¼Æÿ´Ì¸·New voicemailand the icon; it does not delete your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal to turn on the indicator.ÂÀ´ÁÈ´¿¿ÌÇÈÅÁÂæÇ»¸Á¸Êɼ¶¸À´¼¿¼Á·¼¶´ÇÂÅ1. Press MENU/SELECT when in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Clr voicemail, then press MENU/SELECT. The screen shows Reset Voicemail Indicator?.4. Press MENU/SELECT again to turn the voicemail indicator Âæ»¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸ƶŸ¸ÁŸÇÈÅÁÆÇÂthe previous menu.Notes:f Your telephone service provider voicemail may alert you to new messages with a stutter (broken) dial tone. Contact your telephone service provider for more details.f For information about using your voicemail service, contact your telephone service provider.Handset settings Voicemail #>Clr voicemailReset VoicemailIndicator?
25Telephone settingsRename handset The default handset name is HANDSET. You can create your own handset name for each system handset.1. When the handset is idle, press MENU/SELECT.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Rename handset, then press MENU/SELECT.4. Change the handset name when prompted.f Use the dialing keys and the chart on page 60 to enter a name (up to 11 characters). Press a key repeatedly until the desired character appears on the screen.f Press TCID or SDIR ÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅżº»Çf Press MUTE/DELETE to backspace and delete a character.f Press and hold MUTE/DELETE to delete all characters.5. Press MENU/SELECT to save the setting and return to the previous menu. »¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸Key toneThe handset is set to beep with each key press. You can adjust the key tone É¿ÈÀ¸ÂÅÇÈÅÁ¼ÇÂæ¢¹ÌÂÈÇÈÅÁÂæÇ»¸¾¸ÌÇÂÁ¸Ç»¸Å¸´Å¸ÁÂµ¸¸ÃÆÊ»¸Áyou press keys. 1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Key tone, then press MENU/SELECT.4. Press TCID or SDIR to select the desired volume or ¨æ.5. Press MENU/SELECT to save your preference. There is ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸ƶŸ¸ÁŸÇÈÅÁÆÇÂÇ»¸previous menu. Handset settings Clr voicemail>Rename handsetRENAME HANDSETHANDSET____Rename handset>Key toneKEY TONE
Telephone settings26Handset settingsUse caller ID to automatically set date and timeIf you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. Follow the steps below to turn the CID time sync¹¸´ÇÈŸÂÁÂÅÂæ»¸·¸¹´È¿ÇƸÇǼÁº¼ÆOn.1. When the handset is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press TCID or SDIR to scroll to CID time sync, then press MENU/SELECT.4. Press TCID or SDIR to highlight On or Off, then press MENU/SELECT to save. There is a confirmation tone and the screen returns to the previous menu. Home area codeIf you dial seven digits to make a local call (no area code required), enter your area code into the telephone as the home area code. When you receive a call from within your home area code, the caller ID log only displays the seven digits of the telephone number.This feature makes it easy for you to place a call from the caller ID log. If you dial 10 digits to make a local phone call, do not use this home area code feature. If you do, you cannot place local calls from your caller ID log, as they will have only seven digits.To set the home area code:1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Home area code,then press MENU/SELECT»¸ƶŸ¸ÁµÅ¼¸ëÌÆ»ÂÊÆOnly for 7digit dial from CID.4. Use the dialing keys to enter a three-digit home area code. f Press MUTE/DELETE to delete a digit.f Press and hold MUTE/DELETE to delete all digits. 5. Press MENU/SELECTÇÂƴɸ»¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸ƶŸ¸Áshows Area code will not show in CIDµÅ¼¸ëÌµ¸¹ÂŸŸÇÈÅÁ¼ÁºÇÂÇ»¸previous menu.Note: If in the future, your telephone service provider requires you to dial 10 digits to make a local call (area code plus telephone number), you need to delete your home area code and dial out locally from the call ID log. With the home area code displayed, press and hold MUTE/DELETE until the digits are deleted, and then press MENU/SELECT. The home area code is restored to its default setting of _ _ _ (empty). Key tone>CID time sync CID TIME SYNC>On CID time sync>Home area codeHOME AREA CODE___
27Telephone settingsHandset settingsDial modeThe dial mode is preset to tone dialing. If you have pulse (rotary) service, you must change the dial mode to pulse dialing before using the telephone. To set the dial mode:1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Dial mode, then press MENU/SELECT.4. Press TCID or SDIR to select Touch-tone or Pulse, then press MENU/SELECT. The screen shows DIAL MODE is touch-tone or DIAL MODE is pulse. There is a confirmation tone and the screen returns to the previous menu.Web addressUse this feature to view the AT&T website address.1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Web address, then press MENU/SELECT. Home area code>Dial modeDIAL MODE>Touch-tone>Web addressSettingswww.telephones.att.com
Telephone settings28Handset settingsQUIET modeWhen QUIET mode is turned on, the telephone silences all sounds during the set period of time (1-12 hours). However, the handset locator paging tone and any sound-generating operations initiated by users, such as making calls using Ç»¸Æø´¾¸ÅûÂÁ¸ÂÅƸÇǼÁºżÁº¸ÅÉ¿ÈÀ¸ʼ¿¿ÆÂÈÁ·´ÆÁÂÅÀ´¿ì¸ÅÌÂÈturn on QUIET mode, this feature activates immediately and the answering system turns on automatically. When QUIET mode is on, the answering system takes calls and records messages without broadcasting them. To turn QUIET mode on:1. Press and hold QUIET # in idle mode to enter the QUIET mode setting screen. The screen shows Quiet: _ _ hours (1-12 hours).2. Use the dialing keys to enter the desired number of hours (1-12) you would like to turn on QUIET mode, then press MENU/SELECT²ÂÈÅƶŸ¸ÁµÅ¼¸ëÌshows Answering sys is ON and then Quiet mode on.ÂÇÈÅÁª®¢À·¸Âæf While QUIET mode is on, press and hold QUIET #. The screen then shows ªÈ¼¸ÇÀ·¸¼ÆÂæ´Á·ÌÂÈ»¸´Å´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸ NOTES:f If you change the base ringer, handset ringer, ringer volume, key tone, or caller ID announce features when QUIET mode is on, the sample plays but the feature is still muted after saving the setting.f After QUIET mode is turned off or the set period of time has expired, all muted features will be activated again.f The PTT function is not available when QUIET mode is on.f When QUIET mode is on, the handset does not ring when there is an incoming intercom call, but the handset which initiates the intercom call does have the calling tone as normal.f When QUIET mode is on, and Smart call blocker is on and in screening mode, all screened calls will be sent to the answering system after screening. For more information on Smart call blocker, see page 77.
29Telephone settingsTelephone base settingsUse the menu to change the telephone settings. 1. Press MENU/SELECT on the telephone base when it is not in use to enter the main menu.2. Press TCID or SDIR to scroll to the feature to be changed. When scrolling through the menu, the >symbol indicates the selected menu item.3. Press MENU/SELECT to select the highlighted item.Note: Press CANCEL to cancel an operation, back up to the previous menu or exit the menu display. Pressand hold CANCEL to return to idle mode.>Play messages Answering sysST
Telephone settings30Telephone base settingsRinger volume²ÂÈ¶´ÁƸÇÇ»¸żÁº¸ÅÉ¿ÈÀ¸¿¸É¸¿ÇÂÂÁ¸¹ƼË¿¸É¸¿ÆÂÅÇÈÅÁÇ»¸żÁº¸ÅÂæ°»¸ÁÇ»¸żÁº¸Å¼ÆÂæ appears on the screen. 1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Ringers, then press MENU/SELECT.3. Press MENU/SELECT again to select Ringer volume.4. Press TCID or SDIR to sample each volume level.5. Press MENU/SELECT to save your preference. There is ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸ƶŸ¸ÁŸÇÈÅÁÆÇÂÇ»¸previous menu.Notes:f The telephone base ringer volume also determines the ringer volume for intercom calls.f If the ringer volume is set to off, the telephone base is silenced for all incoming calls.f If the ringer volume is set to off, the caller ID will not be announced and the screen will briefly display Caller ID won’t be announced.Ringer toneYou can choose one of ten ringer tones.1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Ringers, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Ringer tone, then pressMENU/SELECT.4. Press TCID or SDIR to sample each ringer tone.5. Press MENU/SELECT to save your preference. There is a ¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸ƶŸ¸ÁŸÇÈÅÁÆÇÂÇ»¸ßɼÂÈÆÀ¸ÁÈNote: If you turn off the ringer volume, you will not hear ringer tone samples. RINGER TONE>Tone 1 Ringer volume>Ringer toneSTSTIntercom>RingersST>Ringer volumeRinger toneSTRINGER VOLUMEST
31Telephone settingsTelephone base settingsSet date/timeThe answering system announces the day and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. The year must be set so that the day ¹Ç»¸ʸ¸¾¶´Áµ¸¶´¿¶È¿´Ç¸·¹ÅÂÀÇ»¸¶´¿¿¸Å¢¼Á¹ÂÅÀ´Ç¼ÂÁ²ÂÈ¶´ÁÇÈÅÁÂæthe date and time settings of the caller ID service and set the date and time manually (see Use caller ID to automatically set date and time on page 36).ì¸Å´ÃÂʸÅ¹´¼¿ÈŸÇ»¸ÆÌÆǸÀÃÅÂÀÃÇÆÌÂÈÇÂƸÇÇ»¸·´Ç¸´Á·ǼÀ¸To set the date and time manually:1. When the telephone base is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Set date/time and then press MENU/SELECT.3. Press TCID or SDIR to choose the month, then press MENU/SELECT, or enter the number using the dialing keys.4. Press TCID or SDIR to choose the day, then press MENU/SELECT, or enter the number using the dialing keys.5. Press TCID or SDIR to choose the year, or enter the number using the dialing keys, then press MENU/SELECT to move on to set the time.6. Press TCID or SDIR to choose the hour, then press MENU/SELECT, or enter the number using the dialing keys.7. Press TCID or SDIR to choose the minute, then press MENU/SELECT, or enter the number using the dialing keys.8. Press TCID or SDIR to highlight AM or PM, or press 2 for AM or 7 for PM.Then, press MENU/SELECTÇÂ¶ÂÁèÅÀ»¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸screen returns to the previous menu.Note: If the clock is not set when a message is recorded, the system announces, “Time and day not set,”before it plays the message.SET DATE MM/DD/YY Ringers>Set date/timeSET TIMEHH:MM --STSTST
Telephone settings32Telephone base settingsLCD languageYou can select the language used for all screen displays. 1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press MENU/SELECT to choose LCD language.4. Press TCID or SDIR to highlight English,Françaisor Español, then press MENU/SELECT. The screen prompts Set English/Français/Español as LCD language?.5. Press MENU/SELECTÇÂ¶ÂÁèÅÀ»¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸screen returns to the previous menu.Note: If you accidentally change the LCD language to French or Spanish, you can reset it back to English without going through the French or Spanish menus. Press MENU/SELECT on the telephone base, then enter 364#. There is a confirmation tone.>LCD language Caller ID anncST LCD LANGUAGE>EnglishST
33Telephone settingsTelephone base settingsCaller ID announceThe caller ID announce feature lets you know who’s calling without having to look at the display. When you have an incoming call, the handset and/or base speaks “Call from...” and the name of the caller based on the directory or caller ID information. If the caller’s name is private or unknown, the phone number up to the last 11 digits will be announced. If the caller’s phone number is also private or unknown, no information will be announced. The default setting is On.ÂÇÈÅÁÂÁÂÅÂæÇ»¸¶´¿¿¸Å¢´ÁÁÂÈÁ¶¸¹¸´ÇÈŸ1. Press MENU/SELECT in idle mode to enter themain menu.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Caller ID annc, then press MENU/SELECT.4. Press TCID or SDIR to scroll to the desired option, then press MENU/SELECT.f ¬¸Ç´¿¿¨Á¨æ - Change the setting for the base and all handsets.f Base - Change the setting for the telephone base only.5. Press TCID or SDIR to highlight On or Off, then press MENU/SELECT. There is a confirmation tone and the screen returns to the previous menu. If you change the setting for ¬¸Ç´¿¿¨Á¨æ, the screen shows CID Annc ON/OFF on all HS & BS.Notes: f To use the caller ID announce feature, you must subscribe to caller ID service from your telephone service provider.f If you have paired an AT&T TL80133 DECT 6.0 cordless speakerphone to the telephone base, the caller ID announce setting for all devices also applies to the cordless speakerphone. When the setting is On, the cordless speakerphone speaks “Call from...” and the name of the caller based on the directory or caller ID information during an incoming call. If the caller’s name is unavailable, the phone number up to the last 11 digits will be announced.f This feature does not announce information for call waiting calls.f It takes at least 2 rings for the phone to receive caller ID information and announce it. If the phone is answered before the end of the second ring, the phone won’t have time to announce the caller’s information.f Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.f Caller ID announce is available in English only. LCD language>Caller ID anncST CALLER ID ANNC>Set all On/OffST
Telephone settings34Set speed dial voicemail numberThis feature lets you save your voicemail number for easy access when you press and hold the 1key. 1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Voicemail #, then press MENU/SELECT.4. Use the dialing keys to enter the voicemail access number provided by your telephone service provider.f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìor right.f Press MUTE/DELETE to erase a digit.f Press and hold MUTE/DELETE to erase all digits.f Press REDIAL/PAUSE to enter a three-second dialing pause (a p appears).5. Press MENU/SELECTÇÂƴɸ»¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸»¸ƶŸ¸Ádisplays Voicemail # saved and then returns to the previous menu.Voicemail (visual message waiting) indicator¢¹ÌÂÈÆȵƶżµ¸ÇÂ´ɼ¶¸À´¼¿ƸÅɼ¶¸Âæ¸Å¸·µÌÌÂÈÅtelephone service provider, this feature provides a visual indication when you have new voicemail messages. New voicemail and the icon appear on the telephone base screen.Notes:f This feature does not indicate new messages recorded on your phone’s built-in answering system.f For more information about the difference between your answering system and voicemail, see page 114. Telephone base settings Caller ID annc>Voicemail #ST VOICEMAIL #800-222-3111_10:21PM 08/08MSG # 1BASENew voicemail
35Telephone settingsTelephone base settingsClear voicemail indicator Use this feature when the telephone indicates there is new voicemail but there is none. For example, when you have accessed your voicemail while away from home. »¼Æ¹¸´ÇÈŸÂÁ¿ÌÇÈÅÁÆÂæÇ»¸·¼Æÿ´Ì¸·New voicemailand the icon; it does not delete your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal to turn on the indicators.ÂÀ´ÁÈ´¿¿ÌÇÈÅÁÂæÇ»¸Á¸Êɼ¶¸À´¼¿¼Á·¼¶´ÇÂÅÆ1. Press MENU/SELECT when in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Clr voicemail, then press MENU/SELECT.The screen shows Reset Voicemail Indicator?.4. Press MENU/SELECT´º´¼ÁÇÂÇÈÅÁÇ»¸ɼ¶¸À´¼¿¼Á·¼¶´ÇÂÅÂæ»¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸ƶŸ¸ÁŸÇÈÅÁÆÇÂÇ»¸ßɼÂÈÆÀ¸ÁÈNotes:f Your telephone service provider voicemail may alert you to new messages with a stutter (broken) dial tone. Contact your telephone service provider for more details.f For information about using your voicemail service, contact your telephone service provider.Rename baseYou can create a new name for the telephone base.1. When the telephone is idle, press MENU/SELECT.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Rename base, then press MENU/SELECT.4. Change the telephone base name when prompted.f Press TCID or SDIR ÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìor right.f Use the dialing keys to enter a name (up to 11 characters). Each time you press a key, a character on that key appears. Additional key presses produce other characters on that key. See the chart on page 56.f Press MUTE/DELETE to backspace and delete a character.f Press and hold MUTE/DELETE to delete all characters.5. Press MENU/SELECT to save the setting and return to the previous menu. »¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸RENAME BASE BASE_________ Clr voicemail>Rename baseSTReset VoicemailIndicator? Voicemail #>Clr voicemailST
Telephone settings36Telephone base settingsKey toneThe telephone base is set to beep with each key press. You can adjust the ¾¸ÌÇÂÁ¸É¿ÈÀ¸ÂÅÇÈÅÁ¼ÇÂæ¢¹ÌÂÈÇÈÅÁÂæÇ»¸¾¸ÌÇÂÁ¸Ç»¸Å¸´Å¸ÁÂµ¸¸ÃÆwhen you press keys. 1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Key tone, then press MENU/SELECT.4. Press TCID or SDIR to select the desired volume or ¨æ.5. Press MENU/SELECT to save your preference. There ¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸ƶŸ¸ÁŸÇÈÅÁÆÇÂÇ»¸previous menu.Use caller ID to automatically set date and timeIf you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. Follow the steps below to turn the CID time sync¹¸´ÇÈŸÂÁÂÅÂæ»¸·¸¹´È¿ÇƸÇǼÁº¼ÆOn.1. When the telephone base is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press TCID or SDIR to scroll to CID time sync, then press MENU/SELECT.4. Press TCID or SDIR to highlight On or Off, then press MENU/SELECT to save. There is a confirmation tone and the screen returns to the previous menu. Key tone>CID time syncST CID TIME SYNC >OnST Rename base>Key toneSTKEY TONET
37Telephone settingsTelephone base settingsHome area codeIf you dial 7 digits to make a local call (no area code required), enter your area code into the telephone as the home area code. When you receive a call from within your home area code, the caller ID log only displays the 7 digits of the telephone number.This feature makes it easy for you to place a call from the caller ID log. If you dial 10 digits to make a local phone call, do not use this home area code feature. If you do, you cannot place local calls from your caller ID log, as they will have only 7 digits.To set the home area code:1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Home area code, then press MENU/SELECT»¸ƶŸ¸ÁµÅ¼¸ëÌÆ»ÂÊÆOnly for 7digit dial from CID.4. Use the dialing keys to enter a three-digit home area code.f Press MUTE/DELETE to delete a digit.f Press and hold MUTE/DELETE to delete all digits. 5. Press MENU/SELECTÇÂƴɸ»¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸ƶŸ¸Áshows Area code will not show in CIDµÅ¼¸ëÌµ¸¹ÂŸŸÇÈÅÁ¼ÁºÇÂÇ»¸previous menu.Note: If in the future, your telephone service provider requires you to dial 10 digits to make a local call (area code plus telephone number), you need to delete your home area code and dial out locally from the caller ID log. With the home area code displayed, press and hold MUTE/DELETE until the digits are deleted, and then press MENU/SELECT. The home area code is now restored to its default setting of _ _ _ (empty). HOME AREA CODE___ CID time sync>Home area codeST
Telephone settings38Telephone base settingsDial modeThe dial mode is preset to tone dialing. If you have pulse (rotary) service, you must change the dial mode to pulse dialing before using the telephone. To set the dial mode:1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Settings, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Dial mode, then press MENU/SELECT.4. Press TCID or SDIR to select Touch-tone or Pulse, then press MENU/SELECT. The screen shows DIAL MODE is touch-tone or DIALMODE is pulse. There is a confirmation tone and the screen returns to the previous menu.Web addressUse this feature to view the AT&T website address.1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Web address, then press MENU/SELECT.www.telephones.att.com Settings>Web addressST Home area code>Dial mode DIAL MODE >Touch-toneSTST
39Telephone operationMaking a callUsing a cordless handset:f Press PHONE/FLASH or /SPEAKER, then enter the telephone number. The screen displays the elapsed time as you talk (in hours, minutes and seconds).Using the telephone base:f ¥¼ìÇ»¸¶ÂÅ·¸·»´Á·Æ¸ÇÂÅßÆÆ /SPEAKER, then enter the telephone number. The screen displays the elapsed time as you talk (in hours, minutes and seconds).Note: Pressing PHONE/FLASH or /SPEAKER to access services from your telephone service provider does not affect the elapsed time.On hook dialing (predialing)Using a cordless handset:1. Enter the telephone number. Press MUTE/DELETE to make corrections when entering the phone number.2. Press PHONE/FLASH or /SPEAKER.Using the telephone base:1. Enter the telephone number. Press MUTE/DELETE to make corrections when entering the phone number.2. Press /SPEAKERÂÅ¿¼ìÇ»¸¶ÂÅ·¸·»´Á·Æ¸ÇAnswering a callUsing a cordless handset:f Press PHONE/FLASH or /SPEAKER. -OR-f Press any dialing key (0-9,TONE or #).Using the telephone base:f ¥¼ìÇ»¸¶ÂÅ·¸·»´Á·Æ¸ÇÂÅßÆÆ /SPEAKER. -OR-f Press any dialing key (0-9,TONE or #).Note: Smart call blocker is set to on by default. If your directory, allow list, star name list, and block list are empty, all calls will be classified as unknown calls. The telephone will screen all calls and ask callers to announce their names or press the pound key (#) before the calls ring on your telephone. We recommend that you set up your directory, allow list, star name list, and block list before using your telepone with the Smart call blocker feature. See About Smart call blocker on page 77.Telephone operation06:30PM 8/06Speaker 0:00:30Elapsed timeElapsed timePhone 0:00:306:30AM 8/06
Telephone operation40Telephone operationEnding a callUsing a cordless handset:• Press OFF/CANCEL or return the handset to the charger.Using the telephone base:• Return the corded handset to the telephone base, or press /SPEAKER.ÈÇÂÂæA call ends automatically when you put the cordless handset in the charger.Temporary ringer silencingUsing a cordless handset:Press OFF/CANCEL or MUTE/DELETE while the telephone is ringing to silence the ringer temporarily on that handset only. »¼ÆÇÈÅÁÆÂæÇ»¸żÁº¸ÅʼǻÂÈÇ·¼Æ¶ÂÁÁ¸¶Ç¼ÁºÇ»¸¶´¿¿»¸next incoming call rings normally at the preset volume.Using the telephone base:Press CANCEL or MUTE/DELETE while the telephone is ringing to silence the ringer temporarily on the telephone µ´Æ¸ÂÁ¿Ì»¼ÆÇÈÅÁÆÂæÇ»¸żÁº¸ÅʼǻÂÈÇ·¼Æ¶ÂÁÁ¸¶Ç¼Áºthe call. The next incoming call rings normally at the preset volume.Note: The telephone base and all handsets ring when there is an incoming call unless the ringer volume is turned off on that device.Ringer mutedRinger muted
Telephone operation41Telephone operationHandset speakerphoneDuring a call, press /SPEAKER to switch between handsfree speakerphone and normal handset use. Press OFF/CANCEL to hang up.Notes:f When you use the speakerphone, the key pad of the handset and the /SPEAKER button are lit.f The speakerphone uses more power than the normal handset. If the handset battery becomes very low while you are using the speakerphone, the call remains in speakerphone mode until you hang up or the battery becomes depleted. f After installing a battery into the handset, the screen may show Low battery. If you use the speakerphone at this time, the battery may become depleted. Follow the battery charging instructions in the Battery installation and charging section on pages page 10- 11.Last number redialEach handset and the telephone base stores the last 10 telephone numbers dialed (up to 30 digits each).To view the 10 most recently dialed numbers:Using a cordless handset:f To display the most recently called number, press REDIAL/PAUSE.f To view up to 10 recently called numbers, press REDIAL/PAUSE,then TCID,SDIR or REDIAL/PAUSE repeatedly.The handset beeps twice at the end of the list. Press OFF/CANCEL to exit.Using the telephone base:f To display the most recently called number, press REDIAL/PAUSE.f To view up to 10 recently called numbers, press REDIAL/PAUSE, then TCID,SDIR or REDIAL/PAUSErepeatedly.The telephone base beeps twice at the end of the list. Press CANCEL to exit.REDIAL #1/10 888-883-2445 STRedial #1/10888-883-2445
Telephone operation42Telephone operation To redial a number:Using a cordless handset:f To dial the displayed number, press PHONE/FLASH or /SPEAKER.-OR-f Press PHONE/FLASH or /SPEAKER, then press REDIAL/PAUSE repeatedly to view the redial memory. Press MENU/SELECT to dial the displayed number.Using the telephone base:f Â·¼´¿Ç»¸·¼Æÿ´Ì¸·ÁÈÀµ¸Å¿¼ìÇ»¸¶ÂÅ·¸·»´Á·Æ¸ÇÂÅßÆÆ /SPEAKER.-OR-f ¥¼ìÇ»¸¶ÂÅ·¸·»´Á·Æ¸ÇÂÅßÆÆ /SPEAKER. Then, press REDIAL/PAUSE repeatedly to view the redial memory. Press MENU/SELECT to dial the displayed number.To delete a redial entry:Using a cordless handset:f While the screen displays the desired number, press MUTE/DELETE to delete the number from the redial memory. Using the telephone base:f While the screen displays the desired number, press MUTE/DELETE to delete the number from the redial memory. EqualizerThe handset and base equalizers enable you to change the quality of the audio to best suit your hearing.Using a cordless handset:While on a call or intercom call, press MENU/SELECT on the cordless handset to select the equalizer setting Treble 1,Treble 2,Bass or Natural (the default setting). The current setting is shown on the handset screen for two seconds.Using the telephone base:1. While on an outside call, press MENU/SELECT.2. Press TCID or SDIR to scroll to Equalizer and then press MENU/SELECT.3. Press TCID or SDIR to select Treble 1,Treble 2,Bass or Natural (the default setting), then press MENU/SELECT to store the setting.Notes:f If you switch the call between the handset and the speakerphone by pressing /SPEAKER, the audio setting remains unchanged. f The current equalizer setting remains unchanged until a new setting is selected.
Telephone operation43Volume controlUsing a cordless handset:You can set the listening volume to one of six levels. While on a call, press TCID/VOLUME to decrease or press SDIR/VOLUME to increase the listening volume.Using the telephone base:You can set the listening volume to one of eight levels. While on a call, press TCID to decrease or SDIR to increase the listening volume.Notes:f Handset and speakerphone volume settings are independent.f When the volume reaches the minimum or maximum setting, you hear two beeps.Call waitingIf you subscribe to call waiting service from your telephone service provider, and someone calls while you are already on a call, you hear two beeps. • Press PHONE/FLASH on the handset or FLASH/PTT on the telephone base to put your current call on hold and take the new call.• Press PHONE/FLASH on your handset or FLASH/PTT on the telephone base at any time to switch back and forth between calls.Note: If the Smart call blocker feature is on and in screening mode, and you receive a call waiting call: f If you have already picked up a screened call, the telephone checks whether the call waiting call’s number can be found in the directory, block list or allow list. It also checks whether the caller name is in the star name list. After that, the telephone displays the caller ID information or Blocked call accordingly. You can press PHONE/FLASH or /SPEAKER to take the new call, or press CALL BLOCK on the handset or telephone base to block it. f If the telephone is screening a call, the call waiting call will be ignored and logged as missed call in the caller ID log.Options while on calls
Telephone operation44Options while on callsMute®Æ¸Ç»¸ÀÈǸ¹ÈÁ¶Ç¼ÂÁÇÂÇÈÅÁÂæÇ»¸À¼¶ÅÂûÂÁ¸²ÂÈcan hear the caller, but the caller cannot hear you. To mute a call:• While on a call, press MUTE/DELETE on the handset or the telephone base. When mute is on, the handset or telephone base shows Muted for a few seconds. The MUTE icon displays on the handset screen or the MUTE/DELETE button lights up on the base until you turn it off.To end mute a call:• Press MUTE/DELETE again. When mute is off, Microphone ON appears temporarily on the handset or telephone base.Chain dialingUse this feature to initiate a dialing sequence from the numbers in the directory, caller ID log or redial memory while you are on a call. Chain dialing is useful when you wish to access other numbers (such as bank account numbers or access codes) from the directory, caller ID log or redial list. Using a cordless handset:To access the directory while on a call:1. Press MENU/SELECT.2. Press TCID or SDIR to scroll to Directory and then press MENU/SELECT.3. Press TCID or SDIR to scroll to the desired number. 4. Press MENU/SELECT to dial the number shown. To access the caller ID log while on a call:1. Press MENU/SELECT.2. Press TCID or SDIR to scroll to Caller ID log, then press MENU/SELECT.3. Press TCID or SDIR to scroll to the desired number. 4. Press MENU/SELECT to dial the number shown. To access the redial list while on a call:1. Press REDIAL/PAUSE to show the most recently dialed number. 2. Press TCID or SDIR to scroll to the desired number, or press REDIAL/PAUSE repeatedly to find the desired number. Then, press MENU/SELECT to dial the number shown.REDIAL #1/10800-360-4121Phone 0:01:20Charlie Johnson6:30AM 8/06888-883-2445Charlie Johnson>Directory Intercom
Telephone operation4506:30AM 8/06Speaker 0:01:20Charlie Johnson>Directory IntercomST888-883-2445Charlie JohnsonSTOptions while on callsUsing the telephone base:To access the directory while on a call:1. Press MENU/SELECT.2. Press TCID or SDIR to scroll to Directory and then press MENU/SELECT.3. Press TCID or SDIR to scroll to the desired number. 4. Press MENU/SELECT to dial the number shown. To access the caller ID log while on a call:1. Press MENU/SELECT.2. Press TCID or SDIR to scroll to Caller ID log, then press MENU/SELECT.3. Press TCID or SDIR to scroll to the desired number. 4. Press MENU/SELECT to dial the number shown. To access the redial list while on a call:1. Press REDIAL/PAUSE to show the most recently dialed number. 2. Press TCID or SDIR to scroll to the desired number, or press REDIAL/PAUSE repeatedly to find the desired number. Then, press MENU/SELECT to dial the number shown.Notes:f You cannot edit a directory entry while on a call. For more details about the directory, see the Directory section starting on page 58.f You cannot copy a caller ID entry into the directory while on a call. For more details about the caller ID log, see page 69.f If you press REDIAL/PAUSE while on a call, you can only view the 10 most recently dialed numbers and you cannot erase the entries. For more details about the redial memory, see page 41.f Press OFF/CANCEL on the handset or CANCEL on the telephone base to exit redial, directory or caller ID log when on a call.Temporary tone dialingIf you have pulse (rotary) service only, you can switch from pulse to touch-tone dialing temporarily during a call. This is useful if you need to send touch-tone signals to access your telephone banking or long distance services. 1. During a call, press TONE .2. Use the dialing keys to enter the desired number. The telephone sends touch-tone signals.3. The telephone automatically returns to pulse dialing after you end the call.REDIAL #1/10 800-360-4121ST
Telephone operation46Options while on callsBlind transfer°»¼¿¸ÂÁ´ÁÂÈÇƼ·¸¶´¿¿ÌÂÈ¶´ÁÇÅ´Áƹ¸ÅÇ»¸¶´¿¿ÇÂ´Æø¶¼è¶·¸É¼¶¸ÂÅ´ÁÌdevice without notifying them.To transfer an outside call from a handset:1. During the call, press MENU/SELECT.2. Press MENU/SELECT to choose Transfer.f If you have one handset and no other registered devices, the outside call is put on hold and your handset shows Transferring call.... The telephone base rings and shows Transfer from HANDSET X.f If you have other registered device(s) or more than one handset, your screen shows TRANSFER TO:. Use the dialing keys to enter a specific device number (0 for the telephone base, 1-9 for handsets 1-9, TONE followed by 0-2 for handsets 10-12, or TONE followed by # for all devices), or press TCID or SDIR to scroll to the desired device and press MENU/SELECT.The outside call is put on hold and your handset screen shows Transferring call... or Transferring call to all.... The other device rings and shows Transfer from HANDSET X (HANDSET represents the handset name, X represents the handset number).3. To answer the call on the destination handset, press PHONE/FLASHor /SPEAKERÂ´ÁÆʸÅÇ»¸¶´¿¿ÂÁÇ»¸Ǹ¿¸Ã»ÂÁ¸µ´Æ¸¿¼ìÇ»¸corded handset or press /SPEAKER. The initiating handset shows Call transferred and goes to idle mode.Phone 0:00:12 6:30AM 8/06>Transfer IntercomTRANSFER TO:>HANDSET 2
Telephone operation47Options while on callsTo transfer an outside call from the telephone base:1. During the call, press MENU/SELECT.2. Press MENU/SELECT, then press to TCID or SDIR chooseTransfer.f If your have one handset and no other registered devices, the outside call is put on hold and the telephone base shows Transferring call.... The handset rings and shows Transfer from BASE 0 (BASE represents the base name).f If you have other registered device(s) or more than one handset, the telephone base shows TRANSFERTO:. Use the dialing keys to enter a specific handset number (1-9 for handsets 1-9, TONE followed by0-2 for handsets 10-12, or TONE followed by # for all handsets), or press TCID or SDIR to scroll to the desired handset and press MENU/SELECT.The outside call is put on hold and the telephone base shows Transferring call... or Transferring call to all.... The other handset(s) rings and shows Transfer from BASE 0 (BASE represents the base name).3. To answer the call on the destination handset, press PHONE/FLASH or /SPEAKER. The telephone base shows Call transferred and goes to idle mode.Notes:f To cancel the transfer and return to the external call before the blind transfer call is answered, press OFF/CANCEL,PHONE/FLASH or /SPEAKER on your handset, or CANCEL or /SPEAKER on your telephone base.f If the other device does not answer the transfer within 30 seconds, the transfer ends and the initiating device rings while showing No response to transfer. If it does not pick up within 30 seconds, the device returns to idle mode and the outside call ends.06:30AM 8/06Speaker 0:00:12>Transfer IntercomSTTRANSFER TO:>HANDSET 2ST
Multiple handset useHandset locatorThe handset locator feature is useful if you misplace any handsets. To start the paging tone: f Press /FIND HS on the telephone base to start the paging tone on all handsets for 60 seconds. Note: If you press OFF/CANCEL or MUTE/DELETE on a handset, the ringer of that handset stops, but the paging to the rest of the handsets continues.To stop the paging tone:f Press PHONE/FLASH,/SPEAKER, or any dialing key (0-9,TONE or #) on the handset(s). -OR-f Press /FIND HS,MUTE/DELETE or CANCEL on the telephone base.Join a call in progressWhen a handset or the telephone base is already on a call and you would like to join the call, press PHONE/FLASH or /SPEAKER on your handset or /SPEAKER on your telephone base, or lift the corded handset. To end the call using a cordless handset, press OFF/CANCEL or place the handset in the charger. To end the call using the telephone base, press /SPEAKER or return the corded handset to the telephone base. The call does not end until all handsets and the telephone base hang up.Note: You can use up to four system handsets and the telephone base at the same time on an outside call. Multiple handset use48** Paging **
Multiple handset use49IntercomUse the intercom feature for conversations between two handsets, a handset and the telephone base, or a handset/telephone base and a cordless headset/speakerphone (sold separately). You can buy additional expansion handsets (model AT&T CL80107), cordless headsets and speakerphones for this telephone base to expand your telephone system (up to 12 handsets or 10 cordless handsets and two cordless headsets/speakerphones).Using a cordless handset:1. Press MENU/SELECT in idle mode to enter the main menu. Press TCID or SDIR to scroll to Intercom, then press MENU/SELECT.f If you have one handset and no other registered devices, the handset shows Calling base.f If you have other registered device(s) or more than one handset, the handset shows INTERCOM TO:. Use the dialing keys to enter a specific device number (0 for the telephone base, 1-9 for handsets 1-9, TONE followed by 0-2 for handsets 10-12, # for a single headset/speakerphone, # followed by 1 or 2 for headset/speakerphone 1 or 2, or TONE followed by # for all devices), or press TCID or SDIR to scroll to the desired device and press MENU/SELECT. Your handset screen shows Calling HANDSET X, Calling BASE 0,Callingheadset or Calling all devices.The destination device(s) rings and shows HANDSET is calling,HANDSET X is calling or HANDSET X is calling all (HANDSET represents the handset name,X represents the handset number).2. To answer the intercom call, press PHONE/FLASH,/SPEAKER or any dialing key (0-9,TONE , or #) on the called device. On the called telephone base, press /SPEAKER or any dialing key (0-9,TONE , or #ÂÅ¿¼ìÇ»¸corded handset. Both devices now show Intercom.3. To end the intercom call, one party presses OFF/CANCEL or places the cordless handset back in the charger, presses CANCEL on the telephone base, or hangs up the corded handset. The other party hears four beeps. Both devices display Intercom ended.Using the telephone base:1. When the telephone base is not in use, press MENU/SELECT in idle mode to enter the main menu, then press TCID or SDIR to scroll to Intercom and press MENU/SELECT.f If you have one handset and no other registered devices, the telephone base shows Calling HANDSET X.Calling BASE 0HANDSET Xis callingIntercom 11:35AM 12/02 Calling HANDSET X
Multiple handset use50Intercom• If you have other registered device(s) or more than one handset, the telephone base shows INTERCOM TO:. Use the dialing keys to enter a specific handset number (1-9 for handsets 1-9, TONE followed by 0-2for handsets 10-12, # for a single headset/speakerphone, # followed by 1 or 2 for headset/speakerphone 1 or 2, or TONE followed by # for all devices), or press TCID or SDIR to scroll to the desired handset and press MENU/SELECT. The telephone base shows Calling HANDSET X orCalling all handsets. The destination handset(s) rings and shows Base is calling, BASE 0 is calling or BASE 0 is calling all.2. To answer the intercom call, press PHONE/FLASH,/SPEAKER or any dialing key (0-9,TONE , or #)on the destination handset. Both the base and the handset now show Intercom.3. To end the intercom call, one party presses OFF/CANCEL or places the cordless handset back in the charger, presses CANCEL on the telephone base, or hangs up the corded handset. The other party hears four beeps. Both devices display Intercom ended.Notes:f Before the intercom call is answered, you can cancel it by pressing OFF/CANCEL on the handset or CANCEL on the telephone base.f If the called device is not answered within 100 seconds, or if it is in use, on a call or out of range, the initiating device shows No answer. Try again..f To temporarily silence the intercom ringer, press OFF/CANCEL or MUTE/DELETE on the handset, or press CANCELor MUTE/DELETE on the telephone base.f You can only use one pair of devices at a time to make intercom calls.f For cordless headsets and speakerphones, refer to the corresponding user’s manual on how to answer and end an intercom call.f If a total of two cordless headset(s) and/or speakerphone(s) are registered to the telephone base, they appear as HEADSET 1 and HEADSET 2, respectively, in the intercom menu.Answer an incoming call during an intercom callIf you receive an outside call during an intercom call, there is a two-beep call waiting tone.f To answer the call, press PHONE/FLASH on the cordless handset. You can ´¿ÆÂ¿¼ìÇ»¸¶ÂÅ·¸·»´Á·Æ¸ÇÂÅßÆÆ /SPEAKER on the telephone base. The intercom call ends automatically. The party on the intercom call hears four beeps. Other system devices can also answer the incoming call by pressing PHONE/FLASH or /SPEAKER on the handset, or pressing /SPEAKERÂÅ¿¼ì¼ÁºÇ»¸¶ÂÅ·¸·»´Á·Æ¸ÇÂÁÇ»¸Ǹ¿¸Ã»ÂÁ¸µ´Æ¸f To end the intercom call without answering the incoming call, press OFF/CANCEL on the handset or CANCEL on the telephone base. You can also return the corded handset back to the telephone base.Note: For cordless headsets and speakerphones, refer to the corresponding user’s manual on how to answer an incoming call during an intercom call.10:01PM 10/15IntercomBASE 0is calling
Multiple handset use51Call transfer using intercomUse the intercom feature to transfer an outside call to another system handset or the telephone base. You can also share an outside call with another system handset or the telephone base.To transfer or share an outside call using intercom:Using a cordless handset:1. During the call, press MENU/SELECT.2. Press TCID or SDIR to scroll to Intercom and press MENU/SELECT.3. Choose the device(s) you would like to transfer the call to using the options from Step 1 on page 46. 4. When the destination device picks up, your handset shows Intercom and the outside call is put on hold. You have the following options: f You can transfer the call. Press MENU/SELECT, then press TCID or SDIR to scoll to Transfer. Press MENU/SELECT again. The handset shows Calltransferred. The other device automatically connects to the outside call. f You can let the other device join you on the outside call in a three-way conversation. Press MENU/SELECT.Press TCID or SDIR to highlight Share call, then press MENU/SELECT.f You can end the intercom call and continue the outside call with your handset. Press PHONE/FLASH on your handset (the ended intercom call party hears four beeps).Using the telephone base:1. During the call, press MENU/SELECT. Press TCID or SDIR to scroll to Intercom, then press MENU/SELECT.2. Choose the handset(s) you would like to transfer the call to using the options from Step 1 on page 46- 47. 3. When the destination handset(s) picks up, the telephone base shows Intercomand the outside call is put on hold. Then, you have the following options: f You can transfer the call. Press MENU/SELECT twice to choose Transfer. The telephone base shows Call transferred. The other handset automatically connects to the outside call. f You can let the other handset join you on the outside call in a three-way conversation. Press MENU/SELECT. Press TCID or SDIR to highlight Share call, then press MENU/SELECT.f You can end the intercom call and continue the outside call with the telephone base. Press CANCEL on the telephone base (the ended intercom call party hears four beeps).>Transfer Share callST>Transfer Share call
Multiple handset use52Push-to-talk (PTT)You can directly broadcast messages to the speakerphone of any device. Press and holdPUSH TO TALK on a handset or FLASH/PTT on the telephone base to begin two-way communication.f While talking to another device, Press and holdPUSH TO TALK on the handset or FLASH/PTT on the Ǹ¿¸Ã»ÂÁ¸µ´Æ¸´Á·Ÿ¿¸´Æ¸Ê»¸ÁÌÂÈ´Å¸èÁ¼Æ»¸·speaking, so that the other person can respond.f Only one device can talk at a time. f Only one PTT session can be active at a time.f While PTT is in use between two devices, other devices cannot use the intercom feature but can access the answering system.f When you attempt to place a PTT call to another device which is accessing the answering system or on an intercom call or outside call, your device screen shows Not available at this time.ÈÅÁ©ÂÁÂÅÂæUsing a cordless handset:1. Press PUSH TO TALK when the handset is not in use. The PUSH TO TALK menu displays.2. Press TCID or SDIR to highlight PTT On/Off, then press MENU/SELECT.3. Press TCID or SDIR to choose On or Off, then press MENU/SELECT.Using the telephone base:1. Press FLASH/PTT when the telephone base is not in use. The PUSH TO TALK menu displays.2. Press TCID or SDIR to highlight PTT On/Off, then press MENU/SELECT.3. Press TCID or SDIR to choose On or Off, then press MENU/SELECT.Note: The handset or the telephone base screen displays No Incoming PTT when PTT is turned off.PUSH TO TALK>PTT On/OffSTPUSH TO TALK>PTT On/OffPTT
Multiple handset use53Push-to-talk (PTT)PTT call to a single deviceUsing a cordless handset:1. There are a few ways to begin a PTT call to a single device. When the handset is not in use:f If you have one handset, press and hold PUSH TO TALK.f If you have more than one handset: Press PUSH TO TALK on the handset. Then, use the dialing keys to enter the destination device number.-OR- Press PUSH TO TALK on the handset. Press TCID or SDIR to highlight the destination device number, then press MENU/SELECT or PUSH TO TALK.The handset shows Connecting to HANDSET X... (HANDSET represents the handset name, Xrepresents the destination handset number) or Connecting to BASE 0... (BASE represents the base name)for a few seconds. Whenthe connection is made, both your and the destination device screens display Press and hold [PTT] to talk.2. Press and hold PUSH TO TALK. A chirp indicates your microphone is on. Speak towards the device. Your voice is broadcast to the destination device.While you are speaking, your handset shows PTT To handset: X or PTT To base.3. Release PUSH TO TALK after speaking. Both devices beep once again and the screens show Press and hold [PTT] to talk, then, you can press and hold PUSH TO TALK to continue speaking or the destination device can respond (see Answer a PTT call on page 56).4. To end the PTT call, press OFF/CANCEL or place the cordless handset in the charger. The handset shows Push to talk Ended for a few seconds.PUSH TO TALK>HANDSET XConnecting toHANDSET X...Press and hold[PTT] to talkPTT Tohandset: X
Multiple handset use54Push-to-talk (PTT)Using the telephone base:1. There are a few ways to begin a PTT call to a single handset. When the telephone base is not in use:f If you have one handset, press and hold FLASH/PTT.f If you have more than one handset: Press FLASH/PTT, then, use the dialing keys to enter the destination handset number. -OR-Press TCID or SDIR to highlight the destination handset number, then press MENU/SELECT or FLASH/PTT.The telephone base shows Connecting to HANDSET X...(HANDSET represents the handset name, Xrepresents the destination handset number) for a few seconds. When the connection is made, both the telephone base and destination handset display Press and hold [PTT] to talk.2. Press and hold FLASH/PTT. A chirp indicates your microphone is on. Speak towards the telephone base. Your voice is broadcast to the destination handset.While you are speaking, the telephone base shows PTT To handset: X.3. Release FLASH/PTT after speaking. Both devices beep once again and the screens show Press and hold [PTT] to talk. Then, you can press and hold FLASH/PTT to continue speaking or the destination device can respond (see Answer a PTT call on page 56).4. To end the PTT call, press CANCEL. The telephone base shows Push to talk Ended for a few seconds.PTT Tohandset: XConnecting toHANDSET X...Press and hold[PTT] to talkPUSH TO TALK>HANDSET XST
Multiple handset use55Push-to-talk (PTT)PTT call to multiple devicesWhen there are multiple handsets registered to the phone system, PTT ÆÈÃÃÂÅÇÆÂÁ¸ÇÂºÅÂÈÃ¶´¿¿Æ©ÆÈÃÃÂÅÇÆ´À´Ë¼ÀÈÀ¹ÂÁ¸ÇÂèɸ¶´¿¿ÆÊ»¸ÁÂÁ¸ÇÂèɸ»´Á·Æ¸ÇÆ´Å¸Ÿº¼ÆǸŸ·´Á·´À´Ë¼ÀÈÀ¹ÂÁ¸ÇÂ¹ÂÈÅ¶´¿¿ÆÊ»¸ÁƼËÂÅÀŸ»´Á·Æ¸ÇÆ´Å¸Ÿº¼ÆǸŸ·»¸èÅÆÇ¹ÂÈÅŸº¼ÆǸŸ·handsets will be eligible to use this feature. Other handsets can only use PTT for one-to-one calls. To call multiple devices using a cordless handset:1. You have three ways to call multiple devices. When the handset is not in use:f Press and hold PUSH TO TALK until the handset shows Connecting to group....f Press PUSH TO TALK. Press TCID or SDIR to choose Group. Press MENU/SELECT or PUSH TO TALK, then your handset shows Connecting to group....f Press PUSH TO TALK. Press TONE followed by #(pound key). Thehandset shows Connecting to group....When the connection is made, both the caller and the destination parties hear a beep. The speakerphones on all other devices automatically activate.2. You need to press and hold PUSH TO TALK when you want to speak. Speak towards the handset. Your voice is broadcast to all eligible devices.3. Release PUSH TO TALK after speaking.4. Any device can reply (see Answer a PTT call on page 56).To call multiple devices using the telephone base:1. You have three ways to call multiple handsets. When the telephone base is not in use:f Press and hold FLASH/PTT until the screen shows Connecting to group....f Press FLASH/PTT. Press TCID or SDIR to choose Group. Press MENU/SELECT or FLASH/PTT, then the telephone base shows Connecting to group....f Press FLASH/PTT. Press TONE followed by # (pound key). The screen shows Connecting to group....When the connection is made, both the caller and the destination parties hear a beep. The speakerphones on all other devices automatically activate.2. You need to press and hold FLASH/PTT when you want to speak. Speak towards the telephone base. Your voice is broadcast to all devices.3. Release FLASH/PTT after speaking.4. Any handset can reply (see Answer a PTT call on page 56).Note: After PUSH TO TALK on the handset or FLASH/PTT on the telephone base is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK on the handset or FLASH/PTT on the telephone base within 10 seconds, the PTT call ends automatically.
Multiple handset use56Push-to-talk (PTT)Answer a PTT callYou can respond to a PTT call, as described below.1. When your device receives a PTT call, it beeps and shows Press and hold[PTT] to talk.2. When the other party is speaking, your speakerphone light is on, and your device shows:• PTT From HS X To HS XÇ»¸èÅÆÇX represents the initiating handset number, and the second X represents your handset number; a maximum of four handset numbers appear).-OR-• PTT From HS X To Base (X represents the initiating handset number) or PTT From HS X To Base & HS XÇ»¸èÅÆÇX represents the initiating handset number, and the second X represents your handset number; a maximum of four handset numbers appear).-OR-• PTT From Base To HS X (the X represents your handset number; a À´Ë¼ÀÈÀ¹èɸ»´Á·Æ¸ÇÁÈÀµ¸ÅÆ´Ãø´Å3. °»¸ÁÌÂÈÅÆø´¾¸ÅûÂÁ¸¿¼º»Ç¼ÆÂæÇ»¸ƶŸ¸ÁÆ»ÂÊÆPress and hold[PTT] to talk), press and hold PUSH TO TALK on your handset or FLASH/PTT on your telephone base. You will hear a chirp. Speak towards the device.f While you are speaking, your device shows PTT To Base,PTT To Handset: X (Xrepresents the handset numbers of one or more ·¸ÆǼÁ´Ç¼ÂÁ»´Á·Æ¸ÇÆ´À´Ë¼ÀÈÀ¹èɸ»´Á·Æ¸ÇÁÈÀµ¸ÅÆ´Ãø´ÅÂÅPTT To Base & Handset: X (Xrepresents the handset numbers of one or more destination handsets; a maximum of four handset numbers appear).f Your voice is broadcast to all destination devices.ì¸ÅÆø´¾¼ÁºŸ¿¸´Æ¸PUSH TO TALK on your handset or FLASH/PTTon your telephone base²ÂÈÅ·¸É¼¶¸ʼ¿¿µ¸¸Ãì¸ÅÇ»¸µ¸¸Ã¼¹ÌÂÈÅÆø´¾¸ÅûÂÁ¸¿¼º»Ç¼ÆÂæÌÂÈ¶´Ápress and hold PUSH TO TALK on your handset or FLASH/PTT on your telephone base to continue speaking, or the destination device can respond.Change a one-to-one PTT call to an intercom callYou can convert a one-to-one PTT session to an intercom call. 1. When your device shows Press and hold [PTT] to talk, press MENU/SELECT.The screen shows Intercom.2. Press MENU/SELECT. Your device displays Calling base,Calling BASE 0or Calling HANDSET X»¸·¸ÆǼÁ´Ç¼ÂÁ·¸É¼¶¸µÅ¼¸ëÌÆ»ÂÊÆPush to talk Ended and then HANDSET is calling,HANDSET X is calling, Base is calling or BASE 0 is calling. The destination device rings.
Multiple handset use57Answer an incoming call during a PTT callWhen you receive an outside call during PTT, there is an alert tone.f During a one-to-one PTT call, press PHONE/FLASH on your handset or /SPEAKER on the telephone base. The PTT call ends automatically and the outside call is answered.f During a one-to-group PTT call, press PHONE/FLASH on the initiating handset or /SPEAKER on the initiating telephone base. The PTT call ends automatically and the outside call is answered.f During a one-to-group PTT call, press PHONE/FLASH on any one of the destination handsets, or press /SPEAKER on the destination telephone base. That device answers the outside call. The PTT call continues for the rest of the PTT participants.f To leave the PTT call without answering the incoming call, press OFF/CANCEL on your handset or CANCEL on your telephone base.The telephone continues to ring.Make an outgoing call during a PTT callf During a one-to-one PTT call, press PHONE/FLASH on your handset or /SPEAKER on your telephone base to get a dial tone. The PTT call ends automatically.f During a one-to-group PTT call, press PHONE/FLASH on the initiating handset or /SPEAKER on the initiating telephone base. The PTT call ends automatically and you get a dial tone.f During a one-to-group PTT call, press PHONE/FLASH on any one of the destination handsets or press /SPEAKER on the destination telephone base. That device gets a dial tone. The PTT call continues for the rest of the PTT participants.End or leave a PTT callThe initiating device can end the PTT call. If any one of the destination devices leaves the PTT call, the call continues until all participants or the initiator hangs up.Press OFF/CANCEL on the handset or place the handset in the charger, or press CANCEL on the telephone base. The screen shows Push to talk Ended.Note: After PUSH TO TALK on the handset or FLASH/PTT on the telephone base is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK on the handset or FLASH/PTT on the telephone base within 10 seconds, the PTT call ends automatically.Push-to-talk (PTT)3. Press PHONE/FLASH or any dialing key (0-9, #or TONE ) on the destination handset, or press /SPEAKER or any dialing key (0-9, #or TONE ) on the telephone base or lift the corded handset to answer. Both devices show Intercom.4. To end the intercom call, press OFF/CANCEL on your handset or place the handset in the charger, or press CANCEL on the telephone base. Both screens show Intercom ended.
58About the directoryShared directoryThe directory is shared by all handsets and the telephone base. Changes made to the directory from any device apply to all.Note:f Only one handset or the telephone base can review the directory at a time. If another device tries to enter the directory, the screen shows Not available at this time.f Directory entries can also be saved to the allow list or block list. See Allow list on page 85 and Block list on page 82.f When Smart call blocker is on, calls with numbers saved in the directory will get through and ring on your telephone. If a number saved in the directory is also saved in the block list, calls with this number will be blocked.CapacityThe directory can store up to 50 entries, with a maximum of 15 alphanumeric characters (including spaces) for names and 30 digits for telephone ÁÈÀµ¸ÅÆ¶ÂÁɸÁ¼¸ÁÇƸ´Å¶»¹¸´ÇÈŸ¶´Á»¸¿ÃÌÂÈèÁ·´Á··¼´¿ÁÈÀµ¸ÅÆquickly (page 62).If you try to save an entry when there are already 50 entries, the screen shows Directory full. You cannot store a new number until you delete one.DirectoryCharlie Johnson888-883-2445
Directory59Create directory entriesCreate a new directory entryUsing a cordless handset or the telephone base:1. Press MENU/SELECT in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Directory, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Add contact, then press MENU/SELECT.4. Use the dialing keys to enter a telephone number (up to 30 digits) when prompted.f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìor right.f Press MUTE/DELETE on the handset or on the telephone base to erase a digit.f Press and hold MUTE/DELETE on the handset or the telephone base to erase all digits.f Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a p appears).-OR-Copy a number from the redial list by pressing REDIAL/PAUSE, then TCID,SDIR or pressing REDIAL/PAUSE repeatedly to locate the number. Press MENU/SELECT to copy the number.5. Press MENU/SELECT to move on to the name.• The display shows Number already saved if the number is already in the directory. You cannot save the same number twice.6. Use the dialing keys to enter a name (up to 15 characters) when prompted. Each time you press a key, the character on that key appears. Additional key presses produce other characters on that key. See the chart on the following page.f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìor right.f Press 0 to add a space.f Press MUTE/DELETE on the handset or the telephone base to erase a character.f Press and hold MUTE/DELETE on the handset or the telephone base to erase all characters.f Press TONE to change the next letter to upper or lower case. Smart call blk>DirectoryReview>Add contactENTER NUMBER888-883-2445_SavedENTER NAMERobert Brown_
Directory607. Press MENU/SELECT to store your new directory entry. There is a ¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸ƶŸ¸ÁÆ»ÂÊÆSaved to directory. To change the entry later, see page 64.Add a predialed telephone number to the directoryYou can save a predialed telephone number to the directory. 1. Enter the telephone number when in idle mode.2. Follow the steps in Edit a directory entry on page 64.Create directory entriesNote: The first letter of every word is a capital letter. The remaining letters in a word start as lower case letters, as shown in the chart below.DialingkeysCharacters by number of key presses123456789101111.-‘()*#&/,2ABCabc23DEFdef34GHI ghi45JKLjkl56MNOmno67PQRSpqr s78TUVtuv89WXYZwxyz90space 0*#
Directory61Review the directoryReview directory entriesUsing a cordless handset or the telephone base:1. Press SDIRÊ»¸Á¼Á¼·¿¸À·¸»¸ÆÈÀÀ´ÅÌƶŸ¸ÁÆ»ÂÊÆµÅ¼¸ëÌ´Á·Ç»¸ÁÇ»¸èÅÆÇ¸ÁÇÅÌ¼ÁÇ»¸·¼Å¸¶ÇÂÅÌÆ»ÂÊÆ -OR-Press MENU/SELECT when in idle mode, then press TCID or SDIR to scroll to Directory. Press MENU/SELECT twice.2. Press TCID or SDIR to browse through the directory. Entries appear ´¿Ã»´µ¸Ç¼¶´¿¿ÌµÌÇ»¸èÅÆÇ¿¸ÇǸÅ¼ÁÇ»¸Á´À¸Notes: f If the telephone number in the directory exceeds 15 digits, < appears in front of the telephone number. Press TONEto move towards the end of the telephone number or press # (pound key) to move towards the beginning of the telephone number.f Directory empty appears if there are no directory entries.
Directory62Search the directorySearch by nameUsing a cordless handset or the telephone base: 1. Press SDIR¼Á¼·¿¸À·¸ÇÂÆ»ÂÊÇ»¸èÅÆÇ¿¼ÆǼÁº¼ÁÇ»¸·¼Å¸¶ÇÂÅÌ2. When an entry appears, press the dialing keys (0-9) to start a name Ƹ´Å¶»»¸·¼Å¸¶ÇÂÅÌÆ»ÂÊÆÇ»¸èÅÆÇÁ´À¸µ¸º¼ÁÁ¼ÁºʼǻÇ»¸èÅÆÇletter associated with the dialing key, if there is an entry in the directory beginning with that letter. Press TCID or SDIR to scroll through the directory. 3. To see other names starting with the letters on the same dialing key, keep pressing the key. The names appear in alphabetical order. For example, if you have the names Jennifer,Jessie,Kevin and Linda in your directory:f If you press 5 (JKL) once, you see Jennifer. Press TCID and you see Jessie.f If you press 5 (JKL) twice, you see Kevin.f If you press 5 (JKL) three times, you see Linda.f If you press 5 (JKL) four times, you see 5 and then the directory entry µ¸º¼ÁÁ¼Áºʼǻ!ÂÅÇ»¸Á¸ËÇ¶¿ÂƸÆÇ¸ÁÇÅÌ´ì¸Å!f If you press 5 (JKL)èɸǼÀ¸ÆÌÂÈƸ¸Jennifer again.Notes:f If there is no name matching the first letter of the key you press, the directory shows a name matching the following letters of the key.f If you press a key (0-9) and no name starts with any of the letters on that key, the directory shows the entry matching the next letter in the directory.
Directory63Dial, delete or edit directory entriesTo dial, delete or edit a directory entry (name and number), the entry must be displayed on the screen. Use Review the directory (page 61) orSearch by name (page 62) to show an entry. Display dialTo dial a displayed number from the directory:Press PHONE/FLASH or /SPEAKER on the handset.-OR-On the telephone base, lift the corded handset or press /SPEAKER.Delete a directory entryUsing a cordless handset:To delete the displayed directory entry, press MUTE/DELETE.The screen displays Delete contact?. Press MENU/SELECT to ¶ÂÁèÅÀ»¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸ƶŸ¸Á·¼Æÿ´ÌÆContact deleted. You cannot retrieve a deleted entry.Using the telephone base:To delete the displayed directory entry, press MUTE/DELETE. The screen displays Delete contact?.Press MENU/SELECTÇÂ¶ÂÁèÅÀ»¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁtone and the screen displays Contact deleted. You cannot retrieve a deleted entry.Robert BrownDelete contact?Robert BrownDelete contact?
Directory64Dial, delete or edit directory entriesEdit a directory entryUsing a cordless handset or the telephone base:1. When a directory entry displays, press MENU/SELECT. The screen shows EDIT NUMBER along with the phone number to be edited. If you only want to edit the name, skip to Step 3. 2. To edit the number:f Press the dialing keys to add digits.f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìor right.f Press MUTE/DELETE on the handset or the telephone base to erase a digit.f Press and hold MUTE/DELETE on the handset or the telephone base to erase all digits.f Press and hold REDIAL/PAUSE to add a three-second dialing pause (a p appears).3. Press MENU/SELECT to move on to the name. The screen shows EDIT NAME along with the name to be edited. 4. To edit the name:f Press the dialing keys to add characters (page 60).f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅżº»Çf Press MUTE/DELETE on the handset or the telephone base to erase a character.f Press and hold MUTE/DELETE on your handset or your telephone base to erase all characters.5. Press MENU/SELECT to save the entry»¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸screen shows Saved to directory.Linda Miller888-722-7702EDIT NUMBER888-883-2445_EDIT NAMERobert Brown_Robert Brown888-883-2445
Directory65Speed dialThe telephone system has 10 speed dial locations (2-9 and 0, location 1 is reserved for voicemail) where you can store the telephone numbers you wish to dial more quickly. You can store up to 30 digits in each location. Speed dial assignments can only be selected from the existing directory entries, with the exception of 1, which must be manually entered. In the directory, speed dial locations except for 1 are indicated by their number on the µÂÇÇÂÀ¿¸ì»´Á·¶ÂÅÁ¸Å¹Ç»¸¸ÁÇÅÌÂÁÇ»¸»´Á·Æ¸Çscreen and bottom right hand corner on the telephone base screen.Assign a speed dial numberUsing a cordless handset or the telephone base:1. When the telephone is idle, press MENU/SELECT.2. Press TCID or SDIR to scroll to Directory. Press MENU/SELECT.3. Press TCID or SDIR to scroll to Speed dial. PressMENU/SELECT.4. Press TCID or SDIR to choose your desired speed dial location (2-9, 0), then press MENU/SELECT. The screen briefly shows Copy from Directory... and then displays the directory list.5. Press TCID or SDIR to scroll to the phone number you wish to assign to the selected speed dial location.6. Press MENU/SELECT to save the setting. There is a confirmation tone and the screen returns to the speed dial list.-OR-1. When the telephone is idle, press and hold the desired speed dial location (2-9,0), then press MENU/SELECT. The screen briefly shows Copy from Directory... and then displays the directory list. 2. Press TCID or SDIR to scroll to the phone number you wish to assign to the selected speed dial location.3. Press MENU/SELECT to save the setting. There is a confirmation tone and the screen returns to the speed dial list.Robert Brown888-883-24452Speed dial locationSTSpeed dial locationRobert Brown888-883-24452 Answering sys>Directory Add contact>Speed dial>2:Robert Brown 3:<Unassigned>
Directory66Speed dialReassign a speed dial numberUsing a cordless handset or the telephone base:1. When the telephone is idle, press MENU/SELECT.2. Press TCID or SDIR to scroll to Directory. Press MENU/SELECT.3. Press TCID or SDIR to scroll to Speed dial. PressMENU/SELECT.4. Press TCID or SDIR to choose the location you wish to reassign, then press MENU/SELECT to show the directory entry.5. Press MENU/SELECT again.6. Press MENU/SELECT to select Change SD. The screen briefly shows Copy from Directory... and then displays the directory list.7. Press TCID or SDIR to scroll to the phone number you wish to reassign to the selected speed dial location.8. Press MENU/SELECT to save the setting and return to the speed dial list. There is a confirmation tone. Assign your speed dial voicemail numberSee the Set speed dial voicemail number sections on page 23 and page 34 for instructions on assigning your speed dial voicemail number.Robert Brown888-883-24452Copy fromDirectory...Linda Miller888-722-77022
Directory67Speed dialDelete a speed dial numberUsing a cordless handset or the telephone base:1. When the telephone is idle, press MENU/SELECT.2. Press TCID or SDIR to scroll to Directory. PressMENU/SELECT.3. Press TCID or SDIR to scroll to Speed dial. PressMENU/SELECT.4. Press TCID or SDIR to scroll to the location you wish to delete the speed dial number from, then:• Press MUTE/DELETE on the handset or the telephone base to delete the displayed speed dial number. There is a confirmation tone and the screen shows Speed dial empty before returning to the speed dial list.-OR-i. Press MENU/SELECT to show the directory entry. ii. Press MENU/SELECT again.iii. Scroll to Clear SD and then press MENU/SELECT to delete the displayed speed dial number. There is a confirmation tone and the screen shows Speed dial empty before returning to the speed dial list.Make a call using speed dialUsing a cordless handset or the telephone base: When in idle mode, press and hold the dialing key (2-9, 0) corresponding to the assigned location you wish to call.-OR-1. Press MENU/SELECT when in idle mode. 2. Press TCID or SDIR to scroll to Directory, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Speed dial, then press MENU/SELECT.4. Press TCID or SDIR to scroll to the desired location and then press PHONE/FLASH or /SPEAKER on the cordless handset, or press /SPEAKER or lift the corded handset on the telephone base.Check your voicemail using speed dialUsing a cordless handset or the telephone base:Press and hold the 1key on a cordless handset or the telephone base to dial your voicemail number. If you are using the telephone base, the speakerphone is used to dial out. You may switch to corded handset mode by picking up the corded handset.Linda Miller888-722-77022Speed dialempty>2:<Unassigned> 3:<Unassigned>
68About caller ID»¼ÆÃÅ·ȶÇÆÈÃÃÂÅÇÆ¶´¿¿¸Å¢ƸÅɼ¶¸ÆÂæ¸Å¸·µÌÀÂÆÇǸ¿¸Ã»ÂÁ¸ƸÅɼ¶¸providers. Caller ID allows you to see the name, number, date and time of calls. »¸´É´¼¿´µ¿¸¶´¿¿¸Å¢¼Á¹ÂÅÀ´Ç¼ÂÁʼ¿¿´Ãø´Å´ì¸ÅÇ»¸èÅÆÇÂÅƸ¶ÂÁ·żÁºInformation about caller ID with call waitingCaller ID with call waiting lets you see the name and telephone number of the caller before answering the call, even while on another call.It may be necessary to change your telephone service to use this feature. Contact your telephone service provider if: f You have both caller ID and call waiting, but as separate services (you may need to combine these services).f You have only caller ID service, or only call waiting service.f You don’t subscribe to caller ID or call waiting services.There are fees for caller ID services. In addition, services may not be available in all areas.This product can provide information only if both you and Ç»¸¶´¿¿¸Å´Å¸¼Á´Å¸´ÆÂæ¸Å¼Áº¶´¿¿¸Å¢ƸÅɼ¶¸´Á·¼¹µÂÇ»telephone service providers use compatible equipment. The time and date, along with the call information, are from the telephone service provider.Caller ID information may not be available for every incoming call. Callers may intentionally block their names and/or telephone numbers. You can only view a maximum of 15 digits of every caller ID log entry. To view caller ID log entries with numbers between 16 and 24 digits, you must save the entry to the directory (see page 73).Note: You can use this product with regular caller ID service, or you can use this product’s other features without subscribing to caller ID or combined caller ID with call waiting service. Caller IDCHRISTINE SMITH888-883-2445NEW10/1510:01AMCHRISTINE SMITH888-883-2445NEW10/1510:01AM
Caller ID69Caller ID logHow the caller ID log worksThe telephone stores caller ID information about the last 50 incoming calls in the telephone base. Entries are stored in reverse chronological order. The phone deletes the oldest entry when the log is full to make room for new calls. This information is common to the telephone base and all handsets, ÆÂ¶»´Áº¸ÆÀ´·¸ÈƼÁº´ÁÌ»´Á·Æ¸ÇÂÅÇ»¸Ǹ¿¸Ã»ÂÁ¸µ´Æ¸´Å¸Ÿ븶Ǹ·¼Áall other devices. If you answer a call before the information appears on the screen, it does not show in the caller ID log.Note: Each entry may have up to 24 digits for the phone number and 15 characters for the name.Missed (new) call indicatorWhen a handset or the telephone base is in idle mode and has new or missed calls, its screen shows XX Missed calls.All new and missed entries are counted as missed calls. Each time you review a new caller ID log entry (indicated by NEW on the screen), the missed calls message goes away. When there is a new unanswered call, the missed calls message displays again. The number of missed calls includes all new and missed entries that have not been reviewed. If you do not want to review the missed calls one by one, but still want to keep them in the caller ID log, you can press and hold OFF/CANCEL on the handset for four seconds when the handset is idle, or press and holdCANCEL on the telephone base for four seconds when Ç»¸Ǹ¿¸Ã»ÂÁ¸µ´Æ¸¼Æ¼·¿¸²ÂÈʼ¿¿»¸´Å´¶ÂÁèÅÀ´Ç¼ÂÁtone. All the entries in the caller ID log become old (reviewed already), and the missed calls message goes away.MSG # 1 10:01PM 10/15BASE6 Missed callsMSG # 1 10:01PM 10/15NEWRobert Brown888-883-2445STRobert Brown888-883-2445NEW10/1509:30 AM HANDSET 110/156 Missed calls10:01AM
Caller ID70Caller ID operationMemory matchIf the incoming telephone number matches the last 7 digits of a telephone number in your directory, the name that appears on the screen matches the corresponding name in your directory. For example, if Christine Smith calls, her name appears as Chris if this is how you entered it into your directory.Note: The number shown in the caller ID log will be in the format sent by the telephone service provider. The telephone service provider usually delivers ten-digit phone numbers (area code plus telephone number). If the telephone number of the caller does not match a number in your directory, the name will appear as it is delivered by the telephone service provider. CHRIS888-883-244510/1510:01AM NEWChris888-883-2445NEW10/1510:01AM
Caller ID71Caller ID operationReview the caller ID log«¸É¼¸ÊÇ»¸¶´¿¿¸Å¢¿ÂºÇÂèÁ·ÂÈÇÊ»Â¶´¿¿¸·ÇÂŸÇÈÅÁÇ»¸¶´¿¿or to copy the caller’s name and number into your directory. Caller ID log empty appears if there are no records in the caller ID log.Using a cordless handset or the telephone base:1. When the handset or the telephone base is in idle mode, press TCID to review the caller ID log in reverse chronological order starting with the most recent call.-OR-Review the caller ID log by pressing MENU/SELECT.Press TCID or SDIR to scroll to Caller ID log, then press MENU/SELECT twice to select Review.2. Press TCID or SDIR to scroll through the list.3. Press OFF/CANCEL on the handset or CANCEL on the telephone base to exit the caller ID log.You hear a double beep when the list reaches the beginning or end of the caller ID log. Note: Only one handset or the telephone base can review the caller ID log at a time. If another device tries to enter the directory or caller ID log, it shows Not available at this time.10:01PM 10/15MSG # 1BASE6 Missed callsDirectory>Caller ID logSTAMNEW10/1510:21PM 10/15NEWCHRISTINE SMITH888-883-2445Date of callCaller’s nameCaller’s numberAppears if it is a new or missed call.Time of callSTCHRISTINE SMITH888-883-2445NEW10:01AM 10/15Caller’s nameCaller’s numberAppears if it is a new or missed call.Date of callTime of call HANDSET 16 Missed calls10:01AM 10/15 Directory>Caller ID log
Caller ID72Caller ID operationView dialing optionsAlthough the incoming caller ID log entries have 10 digits (the area code plus the seven-digit number), in some areas, you may need to dial only the seven digits, 1 plus the seven digits, or 1 plus the area code plus the seven digits. You can change and store the number of digits that you dial in the caller ID log.While reviewing the caller ID log, press # (pound ¾¸ÌŸø´Ç¸·¿ÌÇÂÆ»ÂÊ·¼æ¸Å¸ÁÇ·¼´¿¼ÁºÂÃǼÂÁÆfor local and long distance numbers before dialing or saving the telephone number in the directory.Press 1 repeatedly if you need to add or remove 1 in front of the telephone number before dialing or saving it in the directory.When the number is in the correct format for dialing, call the number by pressing PHONE/FLASH or /SPEAKER on the cordless handset, or press /SPEAKER or lift the corded handset on the telephone base.To save the number to the directory, see Save a caller ID log entry to the directory on the next page.Dial a caller ID log entryUsing a cordless handset or the telephone base:1. When in the caller ID log, press TCID or SDIR to browse.2. Press PHONE/FLASH or /SPEAKER on the cordless handset, or press /SPEAKERÂÅ¿¼ìÇ»¸¶ÂÅ·¸·»´Á·Æ¸ÇÂÁÇ»¸Ǹ¿¸Ã»ÂÁ¸µ´Æ¸to dial the displayed entry.Delete caller ID log entriesUsing a cordless handset or the telephone base:To delete an entry:f Press MUTE/DELETE on the handset or the telephone base to delete the shown entry.To delete all entries:1. Press MENU/SELECT when in idle mode.2. Press TCID or SDIR to scroll to Caller ID log, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Del all calls, then press MENU/SELECT.4. When the screen shows Delete all calls?, press MENU/SELECTÇÂ¶ÂÁèÅÀ»¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸ƶŸ¸ÁŸÇÈÅÁÆÇÂÇ»¸ßɼÂÈÆÀ¸ÁÈ883-24451-883-2445888-883-24451-888-883-2445883-24451-883-2445888-883-24451-888-883-2445Press #Press 1
Caller ID73Caller ID operationSave a caller ID log entry to the directoryUsing a cordless handset or the telephone base:1. When in the caller ID log, press TCID or SDIR to browse.2. Press MENU/SELECT to select an entry. On the telephone base, you need to press MENU/SELECT again to select Directory.3. When the screen displays EDIT NUMBER, use the dialing keys to edit the number.f Press TCID or SDIR to move the cursor to the left or right.f Press MUTE/DELETE on the handset or the telephone base to backspace and erase a digit.f Press and hold MUTE/DELETE on the handset or the telephone base to erase the entire entry.f Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a p appears).4. Press MENU/SELECT to move to the name. 5. When the screen displays EDIT NAME, use the dialing keys (page 60) to edit the name.f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅżº»Çf Press MUTE/DELETE on the handset or the telephone base to erase a character.f Press and hold MUTE/DELETE on the handset or the telephone base to erase all characters.f Press #(pound key) to move the last word to the front. For example, Johnson Charlie becomes Charlie Johnson when you press #(pound key).f Press TONE to change the next letter to upper or lower case.6. Press MENU/SELECT when done. The screen shows Saved to directory.Notes: f You may need to change how a caller ID number is dialed if the entry does not appear in the correct format. Caller ID numbers may appear with an area code that is not necessary for local calls, or without a 1 that is necessary for long distance calls (see View dialing options on the previous page).f If the caller’s name you received from the telephone service provider is all in capital letters, the first letter of every word remains a capital letter, while other letters become lower case. However, the next letter after the prefix “Mac”, “Mc”, “D’”, “C’” or “O’”, is kept as a capital letter. For example, the “D” in “MacDonald” is kept as a capital letter. Another exception is that “VAN DER” will be changed to “Van der”.f If the telephone number from the caller ID information has already been saved in the directory under a different name, the new name will overwrite the old one.
Caller ID74Caller ID operationSave a caller ID log entry to the allow list1. When in the caller ID log, press TCID or SDIR to browse.2. When the desired entry displays, press MENU/SELECT.3. Press TCID or SDIR to choose Allow list, then press MENU/SELECT.4. When the screen displays EDIT NUMBER, use the dialing keys to edit the number.f Press TCID or SDIR to move the cursor to the left or right.f Press MUTE/DELETE to backspace and erase a digit.f Press and hold MUTE/DELETE to erase the entire entry.f Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a p appears).5. Press MENU/SELECT to move to the name. 6. When the screen displays EDIT NAME, use the dialing keys (page 60) to edit the name.f Press TCID or SDIR to move the cursor to the left or right.f Press 0 to add a space.f Press MUTE/DELETE to erase a character.f Press and hold MUTE/DELETE to erase all characters.f Press #(pound key) to move the last word to the front. For example, Johnson Charlie becomes Charlie Johnson when you press #(poundkey).f Press TONE to change the next letter to upper or lower case.7. Press MENU/SELECT when done. The screen shows Saved to allow list.Save a caller ID log entry to the block list1. When in the caller ID log, press TCID or SDIR to browse.2. When the desired entry displays, press MENU/SELECT.3. Press TCID or SDIR to choose Block list, then press MENU/SELECT.4. When the screen displays EDIT NUMBER, use the dialing keys to edit the number.f Press TCID or SDIR to move the cursor to the left or right.f Press MUTE/DELETE to backspace and erase a digit.f Press and hold MUTE/DELETE to erase the entire entry.f Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a p appears).5. Press MENU/SELECT to move to the name. 6. When the screen displays EDIT NAME, use the dialing keys (page 60) to edit the name.f Press TCID or SDIR to move the cursor to the left or right.f Press 0 to add a space.
Caller ID75Caller ID operationf Press MUTE/DELETE to erase a character.f Press and hold MUTE/DELETE to erase all characters.f Press #(pound key) to move the last word to the front. For example, Johnson Charlie becomes Charlie Johnson when you press #(poundkey).f Press TONE to change the next letter to upper or lower case.7. Press MENU/SELECT when done. The screen shows Saved to block list.Save a caller ID log entry to the star name list1. When in the caller ID log, press TCID or SDIR to browse.2. When the desired entry displays, press MENU/SELECT.3. Press TCID or SDIR to choose Star name list, then press MENU/SELECT.4. When the screen displays Star this name? and the caller’s name, press MENU/SELECTÇÂ¶ÂÁèÅÀ»¸screen shows Saved to star name list.Star this name?Bayriver Eleme
Caller ID76Reasons for missing caller ID informationThere are occasions when other information or no information shows for various reasons:On-screen message ReasonPRIVATE NUMBER The caller prefers not to show the telephone number.PRIVATE NAME The caller prefers not to show the name.PRIVATE CALLER The caller prefers not to show the phone number and name. UNKNOWN NUMBER Your telephone service provider cannot determine the caller’s number.UNKNOWN NAME Your telephone service provider cannot determine the caller’s name.UNKNOWN CALLER Your telephone service provider cannot determine the caller’s name and telephone number. Calls from other countries may also generate this message.
77Smart call blockerAbout Smart call blocker*If you have subscribed to caller ID service, then you can use Smart call blocker ÇÂè¿Ç¸Åŵ¶´¿¿ÆǸ¿¸À´Å¾¸Ç¼Áº¶´¿¿Æ´Á·ÈÁÊ´ÁǸ·¶´¿¿Æ¹ÂÅÌÂÈÊ»¼¿¸´¿¿ÂʼÁºwelcome calls to get through.You can set up your lists of welcome callers and unwelcome callers. Smart call blocker allows calls from your welcome callers to get through, and it blocks calls from your unwelcome callers.For other unknown calls, you can allow these calls, block these calls, or forward these calls to the answering system.°¼Ç»ÆÂÀ¸¸´ÆÌ¶ÂÁèºÈŴǼÂÁÆÌÂÈ¶´ÁƸÇÇÂÂÁ¿Ìè¿Ç¸Åŵ¶´¿¿ÆµÌ´Æ¾¼ÁºÇ»¸callers to press the pound key (#) before the calls are put through to you. You can also set Smart call blocker to screen unknown calls by asking the callers to record their names and press the pound key (#ì¸ÅÌÂÈÅ¶´¿¿¸Åcompletes the request, your telephone rings and announces the caller’s name. You can then choose to block or answer the call, or you can forward the call to the answering system. If the caller does not respond or record his/her name, the call is blocked from ringing through. When you add your welcome callers to your Allow list, they will bypass all screening and ring directly to your handsets.Notes:f Smart call blocker is on and in default screening mode, once you install your telephone. It will screen all incoming calls and asks callers to announce their names. We recommend that you set up your directory, allow list, and star name list before using your telephone with Smart call blocker. This can avoid calls from your business associates, family members and friends to go through the screening process. See Directory on page 59, Allow list on page 85 and Star name liston page 88.f °¼Ç»¶´¿¿ƶŸ¸Á¼Áº´¶Ç¼É¸¬À´ÅÇ¶´¿¿µ¿Â¶¾¸ÅƶŸ¸ÁÆ´Á·è¿Ç¸ÅÆ´¿¿¼Á¶ÂÀ¼Áº¶´¿¿Æ¹ÅÂÀÁÈÀµ¸ÅÆÂÅÁ´À¸ÆÇ»´Ç´Å¸ÁÂÇ̸Çsaved in your directory, allow list, block list, or star name list. You can easily add incoming phone numbers to your allow list and block list. This allows you to build up your lists of allowed and blocked numbers, and Smart call blocker will know how to deal with these calls when they come in again.f ÂÇÈÅÁÂæ¬À´ÅÇ¶´¿¿µ¿Â¶¾¸ÅƸ¸¬¸Ç¬À´ÅÇ¶´¿¿µ¿Â¶¾¸ÅÂÁÂæ on page 80.* Includes licenced QaltelTM technology.QaltelTM is a trademark of Truecall Group Limited.
78Smart call blockerAbout Smart call blockerCall categories´¿¿Æ´Å¸¶¿´ÆƼ踷¼ÁÇÂ¹ÂÈÅ¶´Ç¸ºÂż¸ÆWelcome callsWelcome calls are calls with telephone numbers saved in your allow list or directory, and not in your block list. Welcome calls also include calls with caller names saved in your star name list.§ÂǸ»¸Å¸´Å¸À´ÁÌÂź´Á¼Í´Ç¼ÂÁÆ¿¼¾¸ƶ»Â¿ÆÀ¸·¼¶´¿ÂﶸÆ´Á·û´ÅÀ´¶¼¸ÆÇ»´ÇÈƸŵ¶´¿¿ÆÇÂcommunicate important information to you. Robocall uses an autodialer to deliver pre-recorded messages. By entering the name of the organizations into the star name list, it ensures these calls will ring through when you only know the caller names but not their numbers.Unwelcome callsUnwelcome calls are calls with telephone numbers saved in your block list, and you want to block their calls.Calls without numbersCalls without numbers are calls that are “out of area“ or with numbers set to “Private“.Uncategorized callsUncategorized calls include calls with absent caller ID number, calls with numbers that are not in your directory, allow list, or block list, or calls with caller ID names that are not in your star name list.Note: The allow list stores up to 200 entries, the block list stores up to 1,000 entries, and the star name list stores up to 10 names.Call controlsf Smart call blocker is set to on, and to screen calls without numbers and ÈÁ¶´Ç¸ºÂż͸·¶´¿¿ÆµÌ·¸¹´È¿Ç°»¸Á¬À´ÅÇ¶´¿¿µ¿Â¶¾¸Å¼ÆÂÁÇ»¸èÅÆÇżÁºof all incoming calls will be muted.f If your directory, allow list, star name list and block list are empty when ¬À´ÅÇ¶´¿¿µ¿Â¶¾¸Å¼ÆÂÁ´¿¿¶´¿¿Æʼ¿¿µ¸¶¿´ÆƼ踷´ÆÈÁ¾ÁÂÊÁ¶´¿¿Æ»¸telephone will screen all calls and asks callers to announce their names.f ¢¹¬À´ÅÇ¶´¿¿µ¿Â¶¾¸Å¼ÆÂæ´¿¿¼Á¶ÂÀ¼Áº¶´¿¿ÆżÁºÆ¼Á¶¿È·¼ÁºÁÈÀµ¸ÅÆƴɸ·in the block list.f If QUIET mode is on, all incoming calls will be sent to the answering system even if Smart call blocker is on.
79Smart call blockerAbout Smart call blockerSmart call blocker handles calls in the following ways:Call category Call controlWelcome calls AllowThe telephone rings when there is an incoming call with number saved in your allow list or directory, but not in your block list. Robocalls with caller names saved in your star name list will also ring.Unwelcome calls BlockThe telephone does not ring when there is an incoming call with number saved in your block list, and the call will be rejected.Calls without numbersf You can set to screen, allow, or block all calls of this call category, or to send these calls to the answering system. Screening with caller name is the default setting. To change the setting, see Control calls without numberson page 80.Screening with caller name(default settings)The telephone plays the screening announcement, and then ask the caller to say his/her name before the call rings on your telephone. You can then answer the call, and hear the caller’s name announced. You can decide whether to accept or reject the call, or to forward the call to the answering system.Screening without caller nameIf you have selected this option, the telephone plays the screening announcement, and then ask the caller to press the pound key (#) before the call rings on your telephone. You can then answer the call.AllowIf you have selected this option, the telephone allows the calls to get through and ring. The caller’s name and number, if available, will be saved to the allow list.Answering systemIf you have selected this option, the telephone forwards the calls to the answering system without ringing.BlockIf you have selected this option, the telephone rejects the calls with block announcement without ringing. The caller’s name and number, if available, will be saved to the block list.Uncategorized callsf You can set to screen, allow, or block all calls of this call category, or to send these calls to the answering system. Screening with caller name is the default setting. To change the setting, see Control uncategorized calls on page 81.
80Smart call blockerCall block settings¬¸Ç¬À´ÅÇ¶´¿¿µ¿Â¶¾¸ÅÂÁÂæThe Smart call blocker feature is set to on by default.1. Press CALL BLOCK on the handset when it is not in use, and then press MENU/SELECT to select SCB On/Off.-OR-Press MENU/SELECT to enter the main menu when the handset is not in use. Press TCID or SDIR to scroll to Smart call blk, then press MENU/SELECT twice.2. Press TCID or SDIR to highlight On or Off, then press MENU/SELECT to save the setting. You hear a confirmation tone. Control calls without numbersUse this setting to control “out of area” or “Private” calls. You can choose to allow or reject these calls directly. You can also choose to screen them with or without learning the callers’ names before you decide whether to answer or reject these calls. Moreover, you can forward these calls to the answering system.To change the setting: 1. Press CALL BLOCK on the handset when it is not in use.-OR-Press MENU/SELECT to enter the main menu when the handset is not in use. Press TCID or SDIR to scroll to Smart call blk, then press MENU/SELECT.2. Press TCID or SDIR to scroll to Calls w/o num, then press MENU/SELECT.3. Press TCID or SDIR to choose one of the following options, then press MENU/SELECT.f Screening - ask the caller to press the pound key (#)or to say his/her name before the call rings on your telephone.f Allow - allow the calls to get through and ring.f Answering sys - forward the calls to the answering system without ringing.f Block - reject the calls with block announcement. Answering sys>Smart call blk Answering sys>Smart call blk>SCB On/Off Block listCALLS W/O NUM>Screening Star name list>Calls w/o num
81Smart call blockerCall block settings4. If you select Screening, press TCID or SDIR to choose one of the following options, then press MENU/SELECT.f w/ Caller name - ask the caller to say his/her name before the call rings on your telephone. You can then answer the call, and hear the caller’s name announced. You can decide whether to answer or reject the call, or to forward the call to the answering system.f w/o Caller name - ask the caller to press the pound key (#) before the call rings on your telephone. You can then answer the call.Control uncategorized callsUse this setting to control calls with numbers that are not on your directory, allow list or block list, or have no caller ID number display. You can choose to allow or reject these calls directly. You can also choose to screen them with or without learning the callers’ names before you decide whether to answer or reject these calls. Moreover, you can forward these calls to the answering system.To change the setting: 1. Press CALL BLOCK on the handset when it is not in use.-OR-Press MENU/SELECT to enter the main menu when the handset is not in use. Press TCID or SDIR to scroll to Smart call blk, then press MENU/SELECT.2. Press TCID or SDIR to scroll to Uncategorized, then press MENU/SELECT.3. Press TCID or SDIR to choose one of the following options, then press MENU/SELECT.f Screening - ask the caller to press the pound key (#)or to say his/her name before the call rings on your telephone.f Allow - allow the calls to get through and ring.f Answering sys - send the calls to the answering system without ringing.f Block - reject the calls with block announcement.4. If you select Screening, press TCID or SDIR to choose one of the following options, then press MENU/SELECT.f w/ Caller name - ask the caller to say his/her name before the call rings on your telephone. You can then answer the call, and hear the caller’s name announced. You can decide whether to answer or reject the call, or to forward the call to the answering system.SCREENING>w/ Caller name Calls w/o num>Uncategorized Answering sys>Smart call blkUNCATEGORIZED>ScreeningSCREENING>w/ Caller name
82Smart call blockerCall block settingsf w/o Caller name - ask the caller to press the pound key (#) before the call rings on your telephone. You can then answer the call.Note: «ÂµÂ¶´¿¿Æʼ¿¿µ¸¶¿´ÆƼ踷´ÆÈÁ¶´Ç¸ºÂż͸·¶´¿¿ÆIf you select Screening, the telephone screens and è¿Ç¸ÅÆÇ»¸Æ¸¶´¿¿Æ¢Ç´Æ¾ÆÇ»¸¶´¿¿¸ÅÇÂßÆÆÇ»¸ÃÂÈÁ·¾¸Ì#) or announces his/her name before putting the call through to you. There may be robocalls that you do not want to miss. For example, robocalls with announcements or notices from schools or pharmacies. You can set up your star name list with these caller names to allow their calls to get through to you. See Star name list on page 88.Block listAdd numbers that you want to prevent their calls from ringing through. The block list stores up to 1,000 entries.Add a block entry:1. Press CALL BLOCK on the handset when it is not in use.-OR-Press MENU/SELECT to enter the main menu when the handset is not in use. Press TCID or SDIR to scroll to Smart call blk, then press MENU/SELECT.2. Press TCID or SDIR to scroll to Block list, and then press MENU/SELECT.3. Press TCID or SDIR to scroll to Add new entry, then press MENU/SELECT.4. When the screen displays ENTER NUMBER, use the dialing keys to enter a number (up to 30 digits).f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅżº»Çf Press MUTE/DELETE to erase a digit.f Press and hold MUTE/DELETE to erase all digits.f Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a p appears).-OR-Copy a number from the redial list by pressing REDIAL/PAUSE. Then, press TCID, SDIR or REDIAL/PAUSEŸø´Ç¸·¿ÌÇÂèÁ·Ç»¸·¸Æ¼Å¸·ÁÈÀµ¸Å©Å¸ÆÆMENU/SELECT to copy the number.5. Press MENU/SELECT to move on to the name.f The screen shows Number already saved if the number is already in the block list. You cannot save the same number twice.6. When the screen displays ENTER NAME, use the dialing keys to enter a name (up to 15 characters). Press a key repeatedly until the desired ¶»´Å´¶Ç¸Å´Ãø´ÅÆ»¸èÅÆÇ¶»´Å´¶Ç¸Å¹¸É¸ÅÌÊÂÅ·¼Æ¶´Ã¼Ç´¿¼Í¸·f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅżº»Çf Press 0 to add a space.f Press MUTE/DELETE to erase a character.f Press and hold MUTE/DELETE to erase all characters.f Press TONE to change the next letter to upper or lower case.7. Press MENU/SELECT to store your block entry.ENTER NAME Salesman_
83Smart call blockerCall block settingsNotes:f Numbers saved in your directory can also be saved to the block list.f If you save a block entry that has already been saved to the allow list, the entry in the allow list will be removed.Review block list:1. Press CALL BLOCK on the handset when it is not in use.-OR-Press MENU/SELECT to enter the main menu when the handset is not in use. Press TCID or SDIR to scroll to Smart call blk, then press MENU/SELECT.2. Press TCID or SDIR to scroll to Block list, and then press MENU/SELECT.3. Press MENU/SELECT to choose Review.4. Press TCID or SDIR to browse through the block entries.Note: Block list is empty appears if there are no block entries.Save a caller ID log entry to block list:1. Search for the desired caller ID log entry (see Review the caller ID log on page 71).2. When the desired entry displays, press MENU/SELECT.3. Press TCID or SDIR to scroll to Block list, then press MENU/SELECT.4. The handset displays EDIT NUMBER. Use the dialing keys to edit the number, when necessary.f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅżº»Çf Press MUTE/DELETE on the handset to backspace and erase a digit.f Press and hold MUTE/DELETE to erase the entire entry.f Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a pappears).5. Press MENU/SELECT to move to the name. The screen displays EDIT NAME.6. Use the dialing keys to add or edit the name.f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅżº»Çf Press 0 to add a space.f Press MUTE/DELETE to erase a character.f Press and hold MUTE/DELETE to erase all characters.f Press # (pound key) to move the last word to the front. For example, Johnson Charlie becomes Charlie Johnson when you press # (pound key).7. Press MENU/SELECT when done and the screen shows Saved to block list.>Review Add new entrySalesman888-883-2445
84Smart call blockerCall block settingsEdit a block entry: 1. Search for the desired entry in the block list (see Review block list on page 83).2. When the desired entry displays, press MENU/SELECT.The screen displays EDIT NUMBER along with the phone number to be edited. If you only want to edit the name, skip to Step 4.3. To edit the number:f Use the dialing keys to enter digits. f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅright.f Press MUTE/DELETE on the handset to erase a digit.f Press and hold MUTE/DELETE to erase all digits.f Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a p appears).4. Press MENU/SELECT to move on to the name. The screen displays EDIT NAME along with the name to be edited.5. To edit the name:f Use the dialing keys to enter characters.f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅżº»Çf Press 0 to add a space.f Press MUTE/DELETE to erase a character.f Press and hold MUTE/DELETE to erase all characters.6. Press MENU/SELECT to save the entry. The screen displays Saved to block list.Delete a block entry: 1. Search for the desired entry in the block list (see Review block list on page 83).2. When the desired entry displays, press MUTE/DELETE on the handset. The screen shows Delete entry?.3. Press MENU/SELECT to confirm. The screen show Entry deleted, and the next entry displays. You cannot retrieve a deleted entry.Salesman888-883-2445 EDIT NUMBER888-883-2445_ EDIT NAME TV Salesman_
85Smart call blockerCall block settingsDelete all block entries: 1. Press CALL BLOCK on the handset when it is not in use.-OR-Press MENU/SELECT to enter the main menu when the handset is not in use. Press TCID or SDIR to scroll to Smart call blk, then press MENU/SELECT.2.Press TCID or SDIR to scroll to Block list, and then press MENU/SELECT.3. Press TCID or SDIR to highlight Delete all, then press MENU/SELECT. Thescreen shows Delete all in block list?.4. Press MENU/SELECT again to confirm. The screen displays Deleted. There is a confirmation tone.Allow listAdd numbers that you want to allow their calls to get through to you. The allow list stores up to 200 entries.Add an allow entry: 1. Press CALL BLOCK on the handset when it is not in use.-OR-Press MENU/SELECT to enter the main menu when the handset is not in use. Press TCID or SDIR to scroll to Smart call blk, then press MENU/SELECT.2. Press TCID or SDIR to scroll to Allow list, and then press MENU/SELECT.3. Press TCID or SDIR to scroll to Add new entry, then press MENU/SELECT.4. When the screen displays ENTER NUMBER, use the dialing keys to enter a number (up to 30 digits).f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅżº»Çf Press MUTE/DELETE to erase a digit.f Press and hold MUTE/DELETE to erase all digits.f Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a pappears).-OR-Copy a number from the redial list by pressing REDIAL/PAUSE. Then, press TCID, SDIR or REDIAL/PAUSEŸø´Ç¸·¿ÌÇÂèÁ·Ç»¸·¸Æ¼Å¸·ÁÈÀµ¸Å©Å¸ÆÆMENU/SELECT to copy the number.5. Press MENU/SELECT to move on to the name.f The display shows Number already saved if the number is already in the allow list. You cannot save the same number twice.
86Smart call blockerCall block settings6. When the screen displays ENTER NAME, use the dialing keys to enter a name (up to 15 characters). Press a key Ÿø´Ç¸·¿ÌÈÁǼ¿Ç»¸·¸Æ¼Å¸·¶»´Å´¶Ç¸Å´Ãø´ÅÆ»¸èÅÆÇcharacter of every word is capitalized.f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅżº»Çf Press 0 to add a space.f Press MUTE/DELETE to erase a character.f Press and hold MUTE/DELETE to erase all characters.f Press TONE to change the next letter to upper or lower case.7. Press MENU/SELECT to store your allow entry.Notes:f Numbers saved in your directory can also be saved to the allow list.f If you save an allow entry that has already been saved to the block list, the entry in the block list will be removed.Review allow list:1. Press CALL BLOCK on the handset when it is not in use.-OR-Press MENU/SELECT to enter the main menu when the handset is not in use. Press TCID or SDIR to scroll to Smart call blk, then press MENU/SELECT.2. Press TCID or SDIR to scroll to Allow list, and then press MENU/SELECT.3. Press MENU/SELECT to choose Review.4. Press TCID or SDIR to browse through the allow entries.Note: Allow list is empty appears if there are no allow entries.Save a caller ID log entry to allow list:1. Search for the desired caller ID log entry (see Review the caller ID log on page 71).2. When the desired entry displays, press MENU/SELECT.3. Press TCID or SDIR to scroll to Allow list, then press MENU/SELECT.4. The handset displays EDIT NUMBER. Use the dialing keys to edit the number, when necessary.f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅżº»Çf Press MUTE/DELETE on the handset to backspace and erase a digit.f Press and hold MUTE/DELETE to erase the entire entry.f Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a pappears).>Review Add new entryChris888-883-2445ENTER NAME Chris_
87Smart call blockerCall block settings5. Press MENU/SELECT to move to the name. The screen displays EDIT NAME.6. Use the dialing keys to add or edit the name.f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅżº»Çf Press 0 to add a space.f Press MUTE/DELETE to erase a character.f Press and hold MUTE/DELETE to erase all characters.f Press # (pound key) to move the last word to the front. For example, Johnson Charlie becomes Charlie Johnson when you press # (pound key).7. Press MENU/SELECT when done and the screen shows Saved to allow list.Edit an allow entry: 1. Search for the desired entry in the allow list (see Review allow list on page 86).2. When the desired entry displays, press MENU/SELECT.The screen displays EDIT NUMBER along with the phone number to be edited. If you only want to edit the name, skip to Step 4.3. To edit the number:f Use the dialing keys to enter digits. f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅright.f Press MUTE/DELETE on the handset to erase a digit.f Press and hold MUTE/DELETE to erase all digits.f Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a p appears).4. Press MENU/SELECT to move on to the name. The screen displays EDITNAME along with the name to be edited.5. To edit the name:f Use the dialing keys to enter characters.f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅżº»Çf Press 0 to add a space.f Press MUTE/DELETE to erase a character.f Press and hold MUTE/DELETE to erase all characters.6. Press MENU/SELECT to save the entry. The screen displays Saved to allow list.Chris888-883-2445 EDIT NUMBER888-883-2445_ EDIT NAME Chris Smith_
88Smart call blockerCall block settingsDelete an allow entry: 1. Search for the desired entry in the allow list (see Review allow list on page 86).2. When the desired entry displays, press MUTE/DELETE on the handset. The screen shows Delete entry?.3. Press MENU/SELECT to confirm. The screen show Entry deleted, and the next entry displays. You cannot retrieve a deleted entry.Delete all allow entries: 1. Press CALL BLOCK on the handset when it is not in use.-OR-Press MENU/SELECT to enter the main menu when the handset is not in use. Press TCID or SDIR to scroll to Smart call blk, then press MENU/SELECT.2.Press TCID or SDIR to scroll to Allow list, and then press MENU/SELECT.3. Press TCID or SDIR to highlight Delete all, then press MENU/SELECT. Thescreen shows Delete all in allow list?.4. Press MENU/SELECT again to confirm. The screen displays Deleted. There is a confirmation tone.Star name listThere are many organizations like schools, medical offices, and pharmacies that use robocalls to communicate important information to you. Robocall uses an autodialer to deliver pre-recorded messages. By entering the name of the organizations into the star name list, it ensures these calls will ring through when you only know the caller names but not their numbers.If the first 15 characters of the incoming caller ID’s name match a name saved in your star name list, the call will get through and ring. The star name list stores up to 10 names.Add a star name entry:1. Press CALL BLOCK on the handset when it is not in use.-OR-Press MENU/SELECT to enter the main menu when the handset is not in use. Press TCID or SDIR to scroll to Smart call blk, then press MENU/SELECT.2 Press TCID or SDIR to scroll to Star name list, and then press MENU/SELECT.3. Press TCID or SDIR to scroll to Add new entry, then press MENU/SELECT.
89Smart call blockerCall block settings4. When the screen displays ENTER NAME, use the dialing keys to enter a name (up to 15 characters). Press a key Ÿø´Ç¸·¿ÌÈÁǼ¿Ç»¸·¸Æ¼Å¸·¶»´Å´¶Ç¸Å´Ãø´ÅÆ»¸èÅÆÇcharacter of every word is capitalized.f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅżº»Çf Press 0 to add a space.f Press MUTE/DELETE to erase a character.f Press and hold MUTE/DELETE to erase all characters.f Press TONE to change the next letter to upper or lower case.5. Press MENU/SELECT to store your star name entry. The display shows Name already saved if the name is already in the star name list. You cannot save the same name twice.Review star name list:1. Press CALL BLOCK on the handset when it is not in use.-OR-Press MENU/SELECT to enter the main menu when the handset is not in use. Press TCID or SDIR to scroll to Smart call blk, then press MENU/SELECT.2. Press TCID or SDIR to scroll to Star name list, and then press MENU/SELECT.3. Press MENU/SELECT to choose Review.4. Press TCID or SDIR to browse through the star name entries.Note: Star name list is empty appears if there are no star name entries.Save a caller ID log entry to star name list:1. Search for the desired caller ID log entry (see Review the caller ID log on page 71).2. When the desired entry displays, press MENU/SELECT.3. Press TCID or SDIR to scroll to Star name list, then press MENU/SELECT.4. The handset displays Star this name?, and the caller ID name of the caller.5. Press MENU/SELECT, and the screen shows Saved to star name list.ENTER NAMEBayriver Eleme_>Review Add new entryBayriver ElemenStar this name?Bayriver Elemen
90Smart call blockerCall block settingsEdit a star name entry: 1. Search for the desired entry in the star name list (see Review star name list on page 89).2. When the desired entry displays, press MENU/SELECT. The screen displays EDIT NAME along with the name to be edited.3. To edit the name:f Use the dialing keys to enter characters.f Press TCID or SDIRÇÂÀÂɸÇ»¸¶ÈÅÆÂÅÇÂÇ»¸¿¸ìÂÅright.f Press 0 to add a space.f Press MUTE/DELETE to erase a character.f Press and hold MUTE/DELETE to erase all characters.6. Press MENU/SELECT to save the entry. The screen displays Saved to star name list.Delete a star name entry: 1. Search for the desired entry in the star name list (see Review star name list on page 89).2. When the desired entry displays, press MUTE/DELETE on the handset. The screen shows Delete entry?.3. Press MENU/SELECT to confirm. The screen show Entry deleted, and the next entry displays. You cannot retrieve a deleted entry.Delete all star name entries: 1. Press CALL BLOCK on the handset when it is not in use.-OR-Press MENU/SELECT to enter the main menu when the handset is not in use. Press TCID or SDIR to scroll to Smart call blk, then press MENU/SELECT.2.Press TCID or SDIR to scroll to Star name list, and then press MENU/SELECT.3. Press TCID or SDIR to highlight Delete all, then press MENU/SELECT. Thescreen shows Delete all in star name list?.4. Press MENU/SELECT again to confirm. The screen displays Deleted. There is a confirmation tone.Bayriver Elemen ENTER NAMEBay River Elem_
91Smart call blockerCall block settingsScreening announcementIf you have set to screen calls without numbers and/or screen uncategorized calls, the callers of one or all of the following incoming call categories will hear a screening announcement.f Calls that are “out of area“ or with numbers set to “Private“.f Calls with numbers that are not on your directory, allow list, or block list, or with absent caller ID number.f Calls with caller ID names that are not on your star name list.The telephone has two screening options, and each option has its default screening announcements.Screening with caller name - “Hello. Calls to this number are being screened by ¬À´ÅÇ¶´¿¿µ¿Â¶¾¸Å©¿¸´Æ¸Æ´ÌÌÂÈÅÁ´À¸´ì¸ÅÇ»¸ÇÂÁ¸Ç»¸ÁßÆÆÃÂÈÁ·×-OR-Screening without caller name -“Hello. Calls to this number are being screened µÌ¬À´ÅÇ¶´¿¿µ¿Â¶¾¸Å¢¹ÌÂÈÔŸ´¹´À¼¿Ì´¹Å¼¸Á·ÂÅ¼ÁɼǸ·¶´¿¿¸Åÿ¸´Æ¸ßÆÆÃÂÈÁ·ÇÂµ¸¶ÂÁÁ¸¶Ç¸·¢¹ÌÂÈÔŸ´Æ¿¼¶¼ÇÂÅÿ¸´Æ¸»´ÁºÈÃÁÂÊ×You can use these announcements, or record your own name to replace “this number” in both announcements. Please refer to Record your name for all screening announcement on page 92.Play your current announcement of screening with caller name:1. Press CALL BLOCK on the handset when it is not in use.-OR-Press MENU/SELECT to enter the main menu when the handset is not in use. Press TCID or SDIR to scroll to Smart call blk, then press MENU/SELECT.2. Press TCID or SDIR to scroll to Screening annc, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Play annc, then press MENU/SELECT.4. Press MENU/SELECT again to select w/ Caller name. PLAY ANNC>w/ Caller name Rec your name>Play annc Uncategorized>Screening annc
92Smart call blockerCall block settingsPlay your current announcement of screening without caller name:1. Press CALL BLOCK on the handset when it is not in use.-OR-Press MENU/SELECT to enter the main menu when the handset is not in use. Press TCID or SDIR to scroll to Smart call blk, then press MENU/SELECT.2. Press TCID or SDIR to scroll to Screening annc, thenpress MENU/SELECT.3. Press TCID or SDIR to scroll to Play annc, then press MENU/SELECT.4. Press TCID or SDIR to scroll to w/o Caller name, then press MENU/SELECT.Record your name for all screening announcements:1. Press CALL BLOCK on the handset when it is not in use.-OR-Press MENU/SELECT to enter the main menu when the handset is not in use. Press TCID or SDIR to scroll to Smart call blk, then press MENU/SELECT.2. Press TCID or SDIR to scroll to Screening annc, then press MENU/SELECT.3. Press MENU/SELECT to select Rec your name. The system announces, “Record after the tone. Press 5when you are done.”4. Speak towards the handset to record your name. Press 5 to end recording. The announcement with your recorded name plays.To listen to the announcement with your recorded name again, scroll to Play annc and press MENU/SELECT.Reset all your screening announcements:1. Press CALL BLOCK on the handset when it is not in use.-OR-Press MENU/SELECT to enter the main menu when the handset is not in use. Press TCID or SDIR to scroll to Smart call blk, then press MENU/SELECT.2. Press TCID or SDIR to scroll to Screening annc, then press MENU/SELECT. Uncategorized>Screening annc PLAY ANNC>w/o Caller name Rec your name>Play annc
93Smart call blockerCall block settings3. Press TCID or SDIR to scroll to Reset annc, then press MENU/SELECT. The screen shows Reset to default annc?.Press MENU/SELECT´º´¼ÁÇÂ¶ÂÁèÅÀ»¸ƶŸ¸ÁÆ»ÂÊÆAnnc. reset to default before returning to the previous menu. -OR-While an announcement is playing, press MUTE/DELETE.The screen shows Annc. Deleted before returning to the previous menu.Your name will be deleted from all the screening announcements, and the telephone will use the default screening announcements described on page 91.If Smart call blocker is on, the following types of incoming calls can get through to you and ring on your telephone system:f Calls with numbers saved in your allow list.f Calls with numbers saved in your directory, but not on your block list.f Calls with caller ID names saved in your star name list.Note: °»¸Á¬À´ÅÇ¶´¿¿µ¿Â¶¾¸Å¼ÆÂæ´¿¿¼Á¶ÂÀ¼Áº¶´¿¿Æʼ¿¿żÁºÂÁÌÂÈÅǸ¿¸Ã»ÂÁ¸ÆÌÆǸÀ¼Á¶¿È·¼Áº¶´¿¿Æʼǻnumbers saved in the block list.Allow calls without numbersIf Smart call blocker is on, and you have set to allow calls without numbers, the following type of incoming calls will ring on your telephone system.f Calls that are “out of area“ or with numbers set to “Private“. Allow list>Screening annc Play annc>Reset anncChris888-883-2445NEW10/1510:01AMCALLS W/O NUM>Allow>SCB On/Off Block listStar name list>Calls w/o num
94Smart call blockerAllowed callsAllow uncategorized callsIf Smart call blocker is on, and you have set to allow uncategorized calls, the following type of incoming calls will ring on your telephone system.f Calls with numbers that are not on your directory, allow list or block list, or with absent caller ID number.f Calls with caller ID names that are not on your star name list.Note: If you have set to allow all uncategorized calls, the caller’s numbers will not be saved to the allow list. If you want to save the caller’s number to your allow list or block list, you can retrieve the number from caller ID log and save it to the allow list or block list. See Save a caller ID log entry to the block list on page 83 and Save a caller ID log entry to the allow list on page 86. If you want to retrieve the name from caller ID log and save it to the star name list. See Save a caller ID log entry to the star name list on page 89.UNCATEGORIZED>Allow>SCB On/Off Block listCalls w/o num>Uncategorized
95Smart call blockerBlocked callsIf Smart call blocker is on, incoming calls with numbers saved in your block list will not ring. The telephone plays the block announcement “Calls to this number are being screened by Smart call blocker. The number you are calling is not accepting your call. Please hang up.” to the caller, and the call will be terminated.§ÂǸ¢¹¬À´ÅÇ¶´¿¿µ¿Â¶¾¸Å¼ÆÂæ¼Á¶ÂÀ¼Áº¶´¿¿ÆʼǻÁÈÀµ¸ÅÆƴɸ·¼ÁÌÂÈÅµ¿Â¶¾¿¼ÆÇʼ¿¿żÁºÂÁÌÂÈÅtelephone system.Block calls without numbersIf Smart call blocker is on, and you have set to block calls without numbers, the following type of incoming calls will not ring, and the calls will be terminated.f Calls that are “out of area“ or with numbers set to “Private“.The telephone plays the block announcement “Calls to this number are being screened by Smart call blocker. The number you are calling is not accepting your call. Please hang up.” to the caller.Note: The telephone can respond to remote access code while it is playing the block announcement. This allows you to access your answering system from an unknown number remotely. See Remote access on page 122.Block uncategorized callsIf Smart call blocker is on, and you have set to block uncategorized calls, the following type of incoming calls willnot ring, and the calls will be terminated.f Calls with numbers that are not on your directory, allow list or block list, or with absent caller ID number.f Calls with caller ID names that are not on your star name list.The telephone plays the block announcement “Calls to this number are being screened by Smart call blocker. The number you are calling is not accepting your call. Please hang up.” to the caller.Notes:f If you have set to block all uncategorized calls, the caller’s numbers will not be saved to the block list. If you want to save the caller’s number to your allow list or block list, you can retrieve the number from caller ID log and save it to the allow list or block list. See Save a caller ID log entry to the block list on page 83 and Save a caller ID log entry to the allow list on page 86. You can also retrieve the name from caller ID log and save it to the star name list. See Save a caller ID log entry to the star name list onpage 89.f The telephone can respond to remote access code while it is playing the block announcement. This allows you to access your answering system from an unknown number remotely. See Remote access on page 122.Blocked call888-883-2445NEW10/1510:01AMCALLS W/O NUM>Block>SCB On/Off Block listStar name list>Calls w/o numUNCATEGORIZED>Block>SCB On/Off Block listCalls w/o num>Uncategorized
96Smart call blockerScreen calls without numbersIf Smart call blocker is on, and your telephone is set to screen calls without number, the telephone will not ring when receiving incoming calls that are “out of area“ or with numbers set to “Private“. It plays a screening announcement to the caller and asks the caller to respond before putting the call through to you.The telephone has two screening options. You can set your Smart call blocker to screen these calls by asking the callers to record their names and then press the pound key (#). Alternatively, you can screen these calls by only asking the callers to press the pound key (#).Screen calls without numbers and ask for caller names (default screening mode)When the telephone is screening a call, the caller hears the telephone announces “Hello. Calls to this number are being screened by Smart call µ¿Â¶¾¸Å©¿¸´Æ¸Æ´ÌÌÂÈÅÁ´À¸´ì¸ÅÇ»¸ÇÂÁ¸Ç»¸ÁßÆÆÃÂÈÁ·×ì¸ÅÇ»¸caller completes the request, the telephone announces to the caller “Please wait a moment while your call is connected.”. The telephone starts ringing and announces the caller’s name. The telephone screen displays Screened calland you can pick up the call. The telephone will then ask whether you want to answer or reject the call, or to forward the call to the answering system.Screen calls without numbers and do not ask for caller namesWhen the telephone is screening a call, the caller hears the telephone announces “Hello. Calls to this number are being screened by Smart call blocker. ¢¹ÌÂÈÔŸ´¹´À¼¿Ì´¹Å¼¸Á·ÂÅ¼ÁɼǸ·¶´¿¿¸Åÿ¸´Æ¸ßÆÆÃÂÈÁ·ÇÂµ¸¶ÂÁÁ¸¶Ç¸·¢¹ÌÂÈÔŸ´Æ¿¼¶¼ÇÂÅÿ¸´Æ¸»´ÁºÈÃÁÂÊ×ì¸ÅÇ»¸¶´¿¿¸ÅßÆƸÆÇ»¸ÃÂÈÁ·¾¸Ì(#), the telephone announces to the caller “Please wait a moment while your call is connected.”. The telephone starts ringing, and you can answer the call. This ƸÇǼÁº¸Á´µ¿¸ÆÌÂÈÇÂè¿Ç¸ÅÈÁÊ´ÁǸ·¶´¿¿ÆÇ»´ÇÈƸÆ´ÈÇ·¼´¿¸ÅÆÇÂ·¸¿¼É¸Åßrecorded messages, for example, robocalls and telemarketing calls.Notes:f Screening and asking for caller name is the default setting for calls without numbers. To change the setting, see Control calls without numbers on page 80.f In default screening mode, Smart call blocker screens and filters all incoming calls from numbers or names that are not yet saved in your directory, allow list, block list, or star name list. You can easily add incoming phone numbers to your allow list and block list. This allows you to build up your lists of allowed and blocked numbers, and Smart call blocker will know how to deal with these calls when they come in again.f The telephone announces to the caller with “Hello. Calls to this number are being screened by Smart call blocker...” If you have recorded your name in the screening announcements, your recorded name will replace “this number” in the announcements. See Screening announcement on page 91.f If the caller hangs up before the call is screened, or without leaving his/her name while the call is being screened, the call will be logged as missed call in the caller ID log.f While a call is being screened, you can press or /SPEAKER to stop screening and answer the call.Screened callPRIVATE CALLER10/1510:01AMCall blockScreening...10/1510:01AM
97Smart call blockerScreen calls without numbersf If Smart call blocker is on and you receive a call waiting call:-After you have picked up a screened call, the telephone checks whether the call waiting number is in the directory, block list or allow list. It also checks whether the caller name is in the star name list. After that, The telephone then displays the caller ID information or “Blocked call” accordingly. You can press or /SPEAKER to take the new call, or press CALL BLOCK on the handset to block it.- While the telephone is screening a call, the new call will be ignored and logged as missed call in the caller ID log. f Robocalls are unable to respond to the screening announcement, and therefore, will not get through and ring. If you want to allow some robocalls to get through, save their names in the star name list. See page 88.f The telephone can respond to remote access code while it is playing the screening announcement. This allows you to access your answering system from an unknown number remotely. See Remote access on page 122. f After you picked up a screened call and the telephone is announcing the caller’s name to you, you can press CALL BLOCK to reject the call directly. The caller’s number will be automatically saved to the block list. You can also press CANCEL/OFF to hang up without selecting a screening option. The caller’s number will not be saved to the block list.Answer call once1. When the telephone starts ringing, and the screen displays Screened call, press or /SPEAKER to pick up the call. If you have turned on the caller ID announce feature, the telephone announces “You have a call from...”´Á·Ç»¸¶´¿¿¸ÅÔÆÁ´À¸ì¸ÅÌÂÈü¶¾¸·ÈÃÇ»¸¶´¿¿Ç»¸telephone announces “Â´ÁÆʸÅÇ»¸¶´¿¿ßÆÆÂƸÁ·Ç»¼Æ¶´¿¿ÇÂÇ»¸´ÁÆʸżÁºÆÌÆǸÀßÆÆ ÂŸø´ÇÇ»¸Æ¸ÂÃǼÂÁÆßÆÆ”.2. Press 1 to answer the call. The telephone number will not be added to your allow list.Note: To turn on or off caller ID announce, see page 22.Send call to answering system1. When the telephone starts ringing, and the screen displays Screened call, press or /SPEAKER to pick up the call. If you have turned on the caller ID announce feature, the telephone announces “You have a call from...”´Á·Ç»¸¶´¿¿¸ÅÔÆÁ´À¸ì¸ÅÌÂÈü¶¾¸·ÈÃÇ»¸¶´¿¿Ç»¸telephone announces “Â´ÁÆʸÅÇ»¸¶´¿¿ßÆÆÂƸÁ·Ç»¼Æ¶´¿¿ÇÂÇ»¸´ÁÆʸżÁºÆÌÆǸÀßÆÆ ÂŸø´ÇÇ»¸Æ¸ÂÃǼÂÁÆßÆÆ”.2. Press 4 to send the caller to the answering system.Note: The caller is sent to the answering system and can leave a message even if the answering system is off.Phone 0:00:12 6:30AM 8/06Screened callPRIVATE CALLER10/1510:01AMScreened callPRIVATE CALLER10/1510:01AM HANDSET 1 1 New message10/1510:01AMANS ON
98Smart call blockerScreen calls without numbersEnd call1. When the telephone starts ringing, and the screen displays Screened call, press or /SPEAKER to pick up the call. If you have turned on the caller ID feature, the telephone announces “You have a call from...” and the ¶´¿¿¸ÅÔÆÁ´À¸ì¸ÅÌÂÈü¶¾¸·ÈÃÇ»¸¶´¿¿Ç»¸Ǹ¿¸Ã»ÂÁ¸announces “Â´ÁÆʸÅÇ»¸¶´¿¿ßÆÆÂƸÁ·Ç»¼Æ¶´¿¿ÇÂÇ»¸´ÁÆʸżÁºÆÌÆǸÀßÆÆ ÂŸø´ÇÇ»¸Æ¸ÂÃǼÂÁÆßÆÆ”.2. If you do not want to take the call, press to end the call.Screened callPRIVATE CALLER10/1510:01AM HANDSET 1 1 New message10/1510:01AMANS ON
99Smart call blockerScreen uncategorized callsIf Smart call blocker is on, and your telephone is set to screen uncategorized calls, the telephone will not ring when receiving the following incoming calls:f Incoming calls with absent caller ID numbers;f Incoming calls with numbers that are not in your directory, allow list, nor block list; orf Incoming calls with names that are not in your star name list.The telephone plays a screening announcement to the caller and asks the caller to respond before putting the call through to you. There are two screening options. You can set your Smart call blocker to screen these calls by asking the callers to record their names and then press the pound key (#). Alternatively, you can screen these calls by only asking the callers to press the pound key (#).Screen uncategorized calls and ask for caller names (default screening mode)When the telephone is screening a call, the caller hears the telephone announces “Hello. Calls to this number are being screened by Smart call µ¿Â¶¾¸Å©¿¸´Æ¸Æ´ÌÌÂÈÅÁ´À¸´ì¸ÅÇ»¸ÇÂÁ¸Ç»¸ÁßÆÆÃÂÈÁ·×ì¸ÅÇ»¸caller completes the request, the telephone announces to the caller “Pleasewait a moment while your call is connected.”. The telephone starts ringing and announces the caller’s name. The telephone screen displays Screened calland you can pick up the call. The telephone will then ask whether you want to answer or reject the call, or to forward the call to the answering system.Screen uncategorized calls without asking for caller namesWhen the telephone is screening a call, the caller hears the telephone announces “Hello. Calls to this number are being screened by Smart call µ¿Â¶¾¸Å¢¹ÌÂÈÔŸ´¹´À¼¿Ì´¹Å¼¸Á·ÂÅ¼ÁɼǸ·¶´¿¿¸Åÿ¸´Æ¸ßÆÆÃÂÈÁ·ÇÂµ¸¶ÂÁÁ¸¶Ç¸·¢¹ÌÂÈÔŸ´Æ¿¼¶¼ÇÂÅÿ¸´Æ¸»´ÁºÈÃÁÂÊ×ì¸ÅÇ»¸¶´¿¿¸ÅßÆƸÆthe pound key (#), the telephone announces to the caller “Please wait a moment while your call is connected.”. The telephone starts ringing, and you ¶´Áü¶¾ÈÃÇ»¸¶´¿¿»¼ÆƸÇǼÁº¸Á´µ¿¸ÆÌÂÈÇÂè¿Ç¸ÅÈÁÊ´ÁǸ·¶´¿¿ÆÇ»´ÇÈƸÆautodialers to deliver pre-recorded messages, for example, robocalls and telemarketing calls.Screened call888-883-244510/1510:01AMSmart call blkScreening...10/1510:01AM
100Smart call blockerNotes:f Screening is the default setting for uncategorized calls. To change the setting, see Control uncategorized calls on page 81.f The telephone announces to the caller with “Hello. Calls to this number are being screened by Smart call blocker...” If you have recorded your name in the screening announcements, your recorded name will replace “this number” in the announcements. See Screening announcement on page 91.f If the caller hangs up before the call is screened, or without leaving his/her name while the call is being screened, the call will be logged as missed call in the caller ID log.f While a call is being screened, you can press or /SPEAKER to stop screening and answer the call.f If Smart call blocker is on and you receive a call waiting call:-After you have picked up a screened call, the telephone checks whether the call waiting number is in the directory, block list or allow list. It also checks whether the caller name is in the star name list. After that, The telephone then displays the caller ID information or “Blocked call” accordingly. You can press or /SPEAKERto take the new call, or press CALL BLOCK on the handset to block it.- While the telephone is screening a call, the new call will be ignored and logged as missed call in the caller ID log. f Robocalls are unable to respond to the screening announcement, and therefore, will not get through and ring. If you want to allow some robocalls to get through, save their names in the star name list. See page 88.f The telephone can respond to remote access code while it is playing the screening announcement. This allows you to access your answering system from an unknown number remotely. See Remote access on page 122.f After you picked up a screened call and the telephone is announcing the caller’s name to you, you can press CALL BLOCK to reject the call directly. The caller’s number will be automatically saved to the block list. You can also press CANCEL/OFF to hang up without selecting a screening option. The caller’s number will not be saved to the block list.Allow call once1. When the telephone starts ringing, and the screen displays Screened call, press or /SPEAKER to pick up the call. If you have turned on the caller ID announce feature, the telephone announces “You have a call from...”´Á·Ç»¸¶´¿¿¸ÅÔÆÁ´À¸ì¸ÅÌÂÈü¶¾¸·ÈÃÇ»¸¶´¿¿Ç»¸telephone announces “Â´ÁÆʸÅÇ»¸¶´¿¿ßÆÆÂ´ÁÆʸÅ´Á·´¿Ê´ÌÆ´¿¿ÂÊÇ»¼ÆÁÈÀµ¸ÅßÆÆÂµ¿Â¶¾Ç»¼ÆÁÈÀµ¸ÅßÆÆÂƸÁ·Ç»¼Æ¶´¿¿ÇÂÇ»¸´ÁÆʸżÁºÆÌÆǸÀßÆÆ ÂŸø´ÇÇ»¸Æ¸ÂÃǼÂÁÆßÆÆ”.2. Press 1 to answer the call. The telephone number will not be added to your allow list.Note: To turn on or off caller ID announce, see page 22.Screen uncategorized callsPhone 0:00:12 6:30AM 8/06Screened call888-883-244510/1510:01AM
101Smart call blockerScreen uncategorized callsAlways allow1. When the telephone starts ringing, and the screen displays Screened call, press or /SPEAKER to pick up the call. If you have turned on the caller ID announce feature, the telephone announces “You have a call from...”´Á·Ç»¸¶´¿¿¸ÅÔÆÁ´À¸ì¸ÅÌÂÈü¶¾¸·ÈÃÇ»¸¶´¿¿Ç»¸telephone announces “Â´ÁÆʸÅÇ»¸¶´¿¿ßÆÆÂ´ÁÆʸÅ´Á·´¿Ê´ÌÆ´¿¿ÂÊÇ»¼ÆÁÈÀµ¸ÅßÆÆÂµ¿Â¶¾Ç»¼ÆÁÈÀµ¸ÅßÆÆÂƸÁ·Ç»¼Æ¶´¿¿ÇÂÇ»¸´ÁÆʸżÁºÆÌÆǸÀßÆÆ ÂŸø´ÇÇ»¸Æ¸ÂÃǼÂÁÆßÆÆ”.2. Press 2 to answer the call. The telephone number will be added to your allow list.Block call1. When the telephone starts ringing, and the screen displays Screened call, press or /SPEAKER to pick up the call. If you have turned on the caller ID announce feature, the telephone announces “You have a call from...”´Á·Ç»¸¶´¿¿¸ÅÔÆÁ´À¸ì¸ÅÌÂÈü¶¾¸·ÈÃÇ»¸¶´¿¿Ç»¸telephone announces “Â´ÁÆʸÅÇ»¸¶´¿¿ßÆÆÂ´ÁÆʸÅ´Á·´¿Ê´ÌÆ´¿¿ÂÊÇ»¼ÆÁÈÀµ¸ÅßÆÆÂµ¿Â¶¾Ç»¼ÆÁÈÀµ¸ÅßÆÆÂƸÁ·Ç»¼Æ¶´¿¿ÇÂÇ»¸´ÁÆʸżÁºÆÌÆǸÀßÆÆ ÂŸø´ÇÇ»¸Æ¸ÂÃǼÂÁÆßÆÆ”.2. Press 3 or CALL BLOCK to block the call. The telephone plays the block announcement “The number you are calling is not accepting your call. Please hang up.” to the caller. The telephone number will be added to your block list.Phone 0:00:12 6:30AM 8/06Screened call888-883-244510/1510:01AMAdded toAllow list10/1510:01AM HANDSET 1 10/1510:01AMScreened call888-883-244510/1510:01AMAdded toBlock list10/1510:01AM
102Smart call blockerSend call to answering system1. When the telephone starts ringing, and the screen displays Screened call, press or /SPEAKER to pick up the call. If you have turned on the caller ID announce feature, the telephone announces “You have a call from...”´Á·Ç»¸¶´¿¿¸ÅÔÆÁ´À¸ì¸ÅÌÂÈü¶¾¸·ÈÃÇ»¸¶´¿¿Ç»¸telephone announces “Â´ÁÆʸÅÇ»¸¶´¿¿ßÆÆÂ´ÁÆʸÅ´Á·´¿Ê´ÌÆ´¿¿ÂÊÇ»¼ÆÁÈÀµ¸ÅßÆÆÂµ¿Â¶¾Ç»¼ÆÁÈÀµ¸ÅßÆÆÂƸÁ·Ç»¼Æ¶´¿¿ÇÂÇ»¸´ÁÆʸżÁºÆÌÆǸÀßÆÆ ÂŸø´ÇÇ»¸Æ¸ÂÃǼÂÁÆßÆÆ”.2. Press 4 to forward the call to the answering system.Note: The call is forwarded to the answering system and the caller can leave a message even if the answering system is off.To screen call,press [SELECT]10/1510:01AMScreened call888-883-244510/1510:01AM HANDSET 1 1 New message10/1510:01AMANS ONScreen uncategorized calls
103Smart call blockerOption while on a callWhen you are on a call and speaking to the caller, and you do not want to continue the call, you can press the CALL BLOCK button on the handset to end the call. The telephone plays the block announcement “The number you are calling is not accepting your call. Please hang up.” to the caller, and the call will be terminated. The caller’s number will be added to your block list.f Press CALL BLOCK on the handset. The screen displays Block and end? and the caller’s number, if available. Press MENU/SELECT to end the call.Notes:f The caller’s number, if available, will be saved to the block list. The screen displays Added to block list after pressing CALL BLOCK on the handset. If caller’s number is not available, the screen displays No number to block..f You can press CALL BLOCK on the handset to end the call even if Smart call blocker is turned off.No numberto block.10/1510:01AM Phone 0:00:0110/1510:01AMBlock and end?Private caller10/1510:01AMBlocking call...10/1510:01AMEnded 0:00:3010/1510:01AM
104Answering system settingsUse the answering system menu of a system handset or the telephone base to set up the announcement message, ÇÈÅÁÂÁÂÅÂæÇ»¸´ÁÆʸżÁºÆÌÆǸÀÂÅÀ¸ÆÆ´º¸´¿¸ÅÇÇÂÁ¸activate call screening, or change the number of rings, remote access code or message recording time. If the ´ÁÆʸżÁºÆÌÆǸÀ¼ÆÂæÊ»¸ÁÌÂÈ¶»´Áº¸´ÁÌƸÇǼÁº¼Áthe answering system setup menu, the answering system automatically turns on. 1. When the device is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.AnnouncementYour outgoing announcement plays when calls are answered by the answering system. The telephone has a default outgoing announcement, “Hello. Please leave a À¸ÆÆ´º¸´ì¸ÅÇ»¸ÇÂÁ¸× You can use this announcement, or record your own. You can record an announcement up to 90 seconds. The system does not record any announcement shorter than two seconds.To play your current outgoing announcement:Using a cordless handset:1. When the handset is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press MENU/SELECT again to select Announcement.4. Press TCID or SDIR to scroll to Play annc, then press MENU/SELECT.Using the telephone base:1. When the telephone base is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press MENU/SELECT again to select Announcement.4. Press TCID or SDIR to scroll to Play annc, then press MENU/SELECT.>Announcement Delete all oldST Record annc>Play anncSTAnswering system Play messages>Answering sys>AnnouncementDelete all old Record annc>Play annc
Answering system105Answering system settingsTo record a new outgoing announcement:Using a cordless handset:1. When the handset is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press MENU/SELECT again to select Announcement.4. Press MENU/SELECT to select Record annc. The system announces, “Record after the tone. Press 5 when you are done.”5. Speak towards the handset to record your announcement. Press 5 to end recording. Your recorded announcement plays.To listen to the recorded announcement again, scroll to Play annc and press MENU/SELECT.Using the telephone base:1. When the telephone base is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press MENU/SELECT again to select Announcement.4. Press MENU/SELECT again to select Record annc. The system announces, “Record after the tone. Press 5 when you are done.”5. Speak towards the telephone base to record your announcement. Press 5 to end recording. Your recorded announcement plays.To listen to the recorded announcement again, scroll to Play annc and press MENU/SELECT.>Record annc Play anncST>Announcement Delete all oldST>Record annc Play annc Record memo>AnnouncementST
Answering system106Answering system settingsTo delete or reset your outgoing announcement:Using a cordless handset:1. When the handset is in idle mode, press MENU/SELECT.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press MENU/SELECT again to select Announcement.4. Press TCID or SDIR to scroll to Play annc, then press MENU/SELECT.5. While the announcement is playing, press MUTE/DELETE to delete the announcement. The system announces, “Announcement deleted” and the screen shows Annc. Deleted.-OR-1. When the handset is in idle mode, press MENU/SELECT.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press MENU/SELECT again to select Announcement.4. Press TCID or SDIR to scroll to Reset annc, then press MENU/SELECT. The screen shows Reset to default annc?.5. Press MENU/SELECT´º´¼ÁÇÂ¶ÂÁèÅÀ»¸ƶŸ¸ÁÆ»ÂÊÆAnnc. reset to default before returning to the previous menu.Using the telephone base:1. When the telephone base is in idle mode, press MENU/SELECT.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press MENU/SELECT again to select Announcement.4. Press TCID or SDIR to scroll to Play annc, then press MENU/SELECT.5. While the announcement is playing, press MUTE/DELETE to delete the announcement. The system announces, “Announcement deleted” and the screen shows Annc. Deleted.-OR-1. When the telephone base is in idle mode, press MENU/SELECT.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press MENU/SELECT again to select Announcement.4. Press TCID or SDIR to scroll to Reset annc, then press MENU/SELECT. The screen shows Reset to default annc?.5. Press MENU/SELECT´º´¼ÁÇÂ¶ÂÁèÅÀ»¸ƶŸ¸ÁÆ»ÂÊÆAnnc. reset to default before returning to the previous menu.When your announcement is deleted, the system answers calls with the default announcement described on page 104. You cannot delete the default announcement.
Answering system107Answering system settingsÁÆʸÅÂÁÂæBy default, the answering system is on and ready to record messages. You ¶´ÁÇÈÅÁÇ»¸´ÁÆʸżÁºÆÌÆǸÀÂæµÈÇ¼¹ÌÂÈ·ÂÆÂÇ»¸´ÁÆʸżÁºÆÌÆǸÀdoes not answer calls and record incoming messages.ÂÇÈÅÁÇ»¸´ÁÆʸżÁºÆÌÆǸÀÂÁÂÅÂæUsing a cordless handset:1. When the handset is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Answer ON/OFF, then press MENU/SELECT.4. Press TCID or SDIR to highlight On or Off, then press MENU/SELECT to save the setting. You hear a confirmation tone. When the answering system is on, the handset shows ANS ON.Using the telephone base:f Press /ANS ON/OFF to turn the answering system ÂÁÂÅÂæ¢¹Ç»¸´ÁÆʸżÁºÆÌÆǸÀ¼ÆÇÈÅÁ¸·ÂÁ¼Çannounces, “Calls will be answered.” If the answering ÆÌÆǸÀ¼ÆÇÈÅÁ¸·Âæ¼Ç´ÁÁÂÈÁ¶¸Æ“Calls will not be answered.”-OR-1. When the telephone base is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Answer ON/OFF, then press MENU/SELECT.4. Press TCID or SDIR to highlight On or Off, then press MENU/SELECT to save the setting. You hear a confirmation tone. Note: If the answering system is off and there is an incoming call, the system answers after 10 rings and announces, “Please enter your remote access code.” For more information about remote access, see page 111. Play messages>Answering sys Record memo>Answer ON/OFF ANSWER ON/OFF>On
Answering system108Answering system settingsVoice guideThis feature is an alternative way for you to do the basic setup of the answering system. You can follow the voice guide to record your own announcement, set the number of rings, and set the message alert tone.This feature is only available on the telephone base.1. When the telephone base is in idle mode, press MENU/SELECT.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Voice guide, then press MENU/SELECT. You hear a voice prompt, “Hello! This voice guide will assist you with the basic setup of your answering system.“4. Setup your answering system by inputting designated numbers, as instructed in the voice guide.Notes:f You can press CANCEL to quit the voice guide at any time.f If the system does not receive any input, it will play an alert message. If there is still no input, it will announce “Sorry, I still have not received any input. If you want to restart the voice guide, please enter the menu and select Voice guide under Answering system. Good bye.”f After a power outage, the system prompts you to set the date and time. After the date and time setting is done or skipped, the system prompts if you want to set up the answering system via voice guide. Press MENU/SELECT to start the setup. Play messages>Answering sysST Answer ON/OFF>Voice guideSTSettingup Ans sys...
Answering system109Call screeningUse this feature to choose whether incoming messages can be heard over the speaker when they are being recorded. If you turn call screening on, you hear the incoming message. While monitoring an incoming message, you can answer the call by pressing PHONE/FLASH on a cordless handset, or pressing /SPEAKERÂÅ¿¼ì¼ÁºÇ»¸¶ÂÅ·¸·»´Á·Æ¸ÇÂÁÇ»¸Ǹ¿¸Ã»ÂÁ¸µ´Æ¸To change the setting: Using a cordless handset:1. When the handset is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Ans sys setup, then press MENU/SELECT.4. Press MENU/SELECT to select Call screening.5. Press TCID or SDIR to choose On or Off.6. Press MENU/SELECT to save the setting. You hear a confirmation tone.Using the telephone base:1. When the telephone base is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Ans sys setup, then press MENU/SELECT.4. Press MENU/SELECT to select Call screening.5. Press TCID or SDIR to choose On or Off.6. Press MENU/SELECT to save the setting. You hear a confirmation tone.Note: For more information on call screening, see page 115.Answering system settingsVoice guide>Ans sys setupST>Call screening# of ringsSTCALL SCREENING>OnST Answer ON/OFF>Ans sys setup>Call screening# of ringsCALL SCREENING>On
Answering system110Answering system settingsNumber of rings²ÂÈ¶´ÁƸÇÇ»¸´ÁÆʸżÁºÆÌÆǸÀÇÂ´ÁÆʸÅ´Á¼Á¶ÂÀ¼Áº¶´¿¿´ì¸ÅÇÊÂǻŸ¸¹ÂÈÅèɸÂÅƼËżÁºÆ²ÂÈ¶´Á´¿ÆÂƸ¿¸¶ÇÇ¿¿ƴɸÅ¢¹Ç¿¿ƴɸÅ¼ÆƸ¿¸¶Ç¸·Ç»¸´ÁÆʸżÁºÆÌÆǸÀ´ÁÆʸÅÆ´¶´¿¿´ì¸ÅÇÊÂżÁºÆÊ»¸ÁÌÂÈ»´É¸Á¸ÊÀ¸ÆÆ´º¸Æ´Á·´ì¸Å¹ÂÈÅżÁºÆÊ»¸ÁÇ»¸Å¸´Å¸ÁÂÁ¸ÊÀ¸ÆÆ´º¸Æ»¼Æ¹¸´ÇÈŸ´¿¿ÂÊÆÌÂÈto check for new messages and avoid paying long distance charges when calling from out of your local area. By default, the answering system answers an ¼Á¶ÂÀ¼Áº¶´¿¿´ì¸Å¹ÂÈÅżÁºÆTo set the number of rings:Using a cordless handset:1. When the handset is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Ans sys setup, then press MENU/SELECT.4. Press TCID or SDIR to scroll to # of rings, then press MENU/SELECT.5. Press TCID or SDIR to choose among 2, 3, 4, 5,6 or Toll saver.6. Press MENU/SELECT to save the setting. You hear a ¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸Using the telephone base:1. When the telephone base is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Ans sys setup, then press MENU/SELECT.4. Press TCID or SDIR to scroll to # of rings, then press MENU/SELECT.5. Press TCID or SDIR to choose 2, 3, 4, 5,6 or Toll saver.6. Press MENU/SELECT to save the setting. You hear a confirmation tone.Notes: f If you subscribe to voicemail service through your telephone service provider, see Answering system and voicemail indicators on page 114.f If you set the number of rings for the answering system as two or three rings, the caller ID announce feature may not have enough time to announce the caller’s full information.f - If Smart call blocker is on, the first ring of all calls will be muted.Call screening># of ringsST# OF RINGS>4STCall screening># of rings# OF RINGS>4
Answering system111Answering system settingsRemote access codeTo access your answering system remotely from any touch-tone phone, you need to enter a two-digit number (00-99). By default, the remote access code is 19.To change the remote access code:Using a cordless handset:1. When the handset is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Ans sys setup, then press MENU/SELECT.4. Press TCID or SDIR to scroll to Remote code, then press MENU/SELECT.5. Use the dialing keys to enter a two-digit number. Press MUTE/DELETE to backspace and delete a digit. 6. Press MENU/SELECT to save the setting. You hear a confirmation tone.Using the telephone base:1. When the telephone base is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Ans sys setup, then press MENU/SELECT.4. Press TCID or SDIR to scroll to Remote code, then press MENU/SELECT.5. Use the dialing keys to enter a two-digit number. Press MUTE/DELETE to backspace and delete a digit. 6. Press MENU/SELECT to save the setting. You hear a confirmation tone. REMOTE CODE19 # of rings>Remote codeST Voice guide>Ans sys setupST # of rings>Remote code Answer ON/OFF>Ans sys setupREMOTE CODE19
Answering system112Answering system settingsMessage alert toneWhen the message alert tone is set to On, and there is at least one new message, the telephone base beeps every 10 seconds. By default, the À¸ÆÆ´º¸´¿¸ÅÇÇÂÁ¸¼ÆƸÇÇÂÂæThere is no audible alert at the handset.To change the setting:Using a cordless handset:1. When the handset is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Ans sys setup, then press MENU/SELECT.4. Press TCID or SDIR to scroll to Msg alert tone, then press MENU/SELECT.5. Press TCID or SDIR to choose On or Off.6. Press MENU/SELECT to save the setting. You hear a confirmation tone.Using the telephone base:1. When the telephone base is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Ans sys setup, then press MENU/SELECT.4. Press TCID or SDIR to scroll to Msg alert tone, then press MENU/SELECT.5. Press TCID or SDIR to choose On or Off.6. Press MENU/SELECT to save the setting. You hear a confirmation tone.Notes:f The message alert tone beeps only if all the following conditions are met:- Answering system is on. - Message alert tone setting is on. - There are new messages.f To temporarily turn off the message alert tone, see page 116. Remote code>Msg alert toneSTMSG ALERT TONE>OnSTRemote code>Msg alert toneMSG ALERT TONE>On
Answering system113Answering system settingsMessage recording timeYou can set the recording time allowed for incoming messages. The message length is three minutes by default. To change the setting:Using a cordless handset:1. When the handset is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Ans sys setup, then press MENU/SELECT.4. Press TCID or SDIR to scroll to Recording time, then press MENU/SELECT.5. Press TCID or SDIR to choose 3 minutes, 2 minutes or1 minute, then press MENU/SELECT to save the setting. You hear a confirmation tone.Using the telephone base:1. When the telephone base is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press TCID or SDIR to scroll to Ans sys setup, then press MENU/SELECT.4. Press TCID or SDIR to scroll to Recording time, then press MENU/SELECT.5. Press TCID or SDIR to choose 3 minutes, 2 minutes or 1 minute, thenpress MENU/SELECT to save the setting. You hear a confirmation tone.>Recording timeMsg alert toneSTRECORDING TIME>3 minutesST>Recording timeMsg alert toneRECORDING TIME>3 minutes
Answering system114About the answering systemAnswering system and voicemail indicators²ÂÈÅǸ¿¸Ã»ÂÁ¸»´ÆƸôŴǸ¼Á·¼¶´ÇÂÅÆ¹ÂÅÇÊÂ·¼æ¸Å¸ÁÇÇÌøÆ¹ɼ¶¸À¸ÆÆ´º¸ÆÇ»ÂƸ¿¸ìÂÁ¼ÇÆµÈ¼¿Ç¼Á·¼º¼Ç´¿´ÁÆʸżÁºÆÌÆǸÀ´Á·Ç»ÂƸ¿¸ì´ÇÌÂÈÅǸ¿¸Ã»ÂÁ¸ƸÅɼ¶¸ÃÅÂɼ·¸ÅÔÆɼ¶¸À´¼¿¹¸¸ÆÀ´Ì´ÃÿÌ²ÂÈÅtelephone’s built-in digital answering system messages and voicemail À¸ÆÆ´º¸Æ´Å¸ƸôŴǸ´¶»´¿¸ÅÇÆÌÂÈÇÂÁ¸ÊÀ¸ÆÆ´º¸Æ·¼æ¸Å¸ÁÇ¿Ìf If and XX New messages show on the handset, and XX New messages shows and /PLAY/STOPë´Æ»¸ÆÂÁthe telephone base, there are new messages in the built-in answering system. To listen to messages recorded on your digital answering system, press /PLAY/STOP on the telephone base (page 118).f If and New voicemail display on the handset and the telephone base, your telephone service provider is indicating that it has new voicemail for you. To listen to your voicemail, dial an access number provided by your telephone service provider, followed by a security code or PIN.Some telephone service providers bundle or combine multiple services like voicemail and call waiting, so you may not be aware that you have voicemail. To check what services you have and how to access them, contact your telephone service provider. ÂÈƸÌÂÈÅɼ¶¸À´¼¿ƸÅɼ¶¸Å´Ç»¸ÅÇ»´ÁÇ»¸´ÁÆʸżÁºÆÌÆǸÀÇÈÅÁÂæthe answering system. To use the answering system rather than your voicemail service, contact your telephone service provider to deactivate your voicemail service. Note: After reviewing all new messages, the number of old messages appears on the message counter.Using the answering system and voicemail togetherYou can also use your telephone answering system and voicemail together by setting your built-in answering system to answer before voicemail answers, as described below. To learn how to program your voicemail settings, contact your telephone service provider. Then, if you are on a call, or if the answering system is busy recording a message and you receive another call, the second caller can leave a voicemail message.Set your answering system to answer calls at least two rings earlier than your voicemail is set to answer. For example, if your voicemail answers ´ì¸ÅƼËżÁºÆƸÇÌÂÈÅ´ÁÆʸżÁºÆÌÆǸÀÇÂ´ÁÆʸÅ´ì¸Å¹ÂÈÅżÁºÆSome voicemail providers may program the delay before answering calls in seconds instead of rings. In this case, allow six seconds per ring when determining the appropriate setting.10:01MSG # 1 10/15BASE1 New message HANDSET 1 1 New message10/1510:01AMANS ON
Answering system115About the answering systemMessage capacityThe answering system can record up to 99 messages, depending on the length of each message. Individual messages can be up to three minutes, and the maximum recording time is approximately 22 minutes. The actual recording time depends on individual message characteristics. Messages remain available for replay until you delete them.When there are messages (including memos) on the answering system, the total number of messages stored shows in the message counter.If the answering system has less than three minutes of Ÿ¶ÂÅ·¼ÁºǼÀ¸¿¸ì¼Ç´ÁÁÂÈÁ¶¸ÆÖ¥¸ÆÆÇ»´ÁǻŸ¸À¼ÁÈǸÆÇÂŸ¶ÂÅ·×before message playback at the handset or the telephone base. Rec mem lowdisplays on the device screen in idle mode. When you turn on the answering system at the telephone base, it announces, “Calls will be answered. Less than three minutes to record.”If the memory is full, the answering system announces, Ö¦¸ÀÂÅÌ¼Æ¹È¿¿×before message playback. The device screen displays Rec mem full in idle mode. Once the memory is full, you cannot turn the answering system back ÂÁ¼¹¼Ç»´Æµ¸¸ÁÇÈÅÁ¸·ÂæÁÂÅ¶´ÁÌÂÈŸ¶ÂÅ·Á¸ÊÀ¸ÆÆ´º¸ÆÈÁǼ¿¿·ÂÁ¸Æhave been deleted. Memory full displays if you want to turn on the answering system on the handset but there is no memory. Voice promptsThe system provides voice prompts to guide you through the setup procedures at the telephone base, message playback, remote access and recording outgoing announcements. Call screeningTo screen a call at the telephone base:If the answering system and call screening are on (see Call screening on page 115), the announcement and the incoming message broadcast at the telephone base when a call is answered by the answering system.Options while a message is being recorded:f Press VOL Tor VOL S on the telephone base to adjust the call screening volume.f Press /PLAY/STOP or CANCEL to temporarily silence the call screening.f Press /PLAY/STOP to temporarily turn on the call screening if call ƶŸ¸Á¼Áº¼ÆƸÇÇÂÂæf ¥¼ìÇ»¸¶ÂÅ·¸·»´Á·Æ¸ÇÂÅßÆÆ /SPEAKER to answer the call.10:01 10/15MSG # 5BASE5 New messages
Answering system116About the answering systemTo screen a call at the handset:While a message is being recorded, the handset shows To screen call, press [SELECT]. Press MENU/SELECT to screen the call.Options while a message is being recorded:f Press TCID/VOLUME or SDIR/VOLUME on the handset to adjust the call screening volume.f Press OFF/CANCEL to temporarily silence the call screening.f Press MENU/SELECT to temporarily turn on the call screening if call ƶŸ¸Á¼Áº¼ÆƸÇÇÂÂæf Press /SPEAKERÇÂÇÈÅÁÂæÇ»¸Æø´¾¸ÅûÂÁ¸´Á·ƶŸ¸ÁÇ»¸¶´¿¿through the handset earpiece.Call interceptWhile screening a call, you can stop recording and speak to the caller by pressing PHONE/FLASH on the cordless handset, pressing /SPEAKER on Ç»¸Ǹ¿¸Ã»ÂÁ¸µ´Æ¸ÂÅ¿¼ì¼ÁºÇ»¸¶ÂÅ·¸·»´Á·Æ¸ÇBase ringerPress VOL Tor VOL S on the telephone base to adjust the ringer volume when the telephone is not in use.You hear a sample of the ringer while adjusting the volume. The telephone base shows «¼Áº¸ÅÂæand when you set the volume to 0.¸ÀÃÂŴż¿ÌÇÈÅÁ¼ÁºÂæÇ»¸À¸ÆÆ´º¸´¿¸ÅÇÇÂÁ¸If the message alert tone is turned on, the telephone base beeps every 10 seconds when there are new messages. Pressing any telephone base key temporarily silences the message alert tone. If you press MUTE/DELETEÊ»¸Á¼Á¼·¿¸À·¸ÇÂǸÀÃÂŴż¿ÌÇÈÅÁÂæÇ»¸message alert tone, there is a voice prompt directing you to press MUTE/DELETE again to delete all old messages. The message alert tone is ǸÀÃÂŴż¿ÌÂæ¨Á¿ÌßÆÆMUTE/DELETE a second time if you wish to erase all old messages in your answering system.The message alert tone resumes when you receive another message.
Answering system117Message playbackIf you have new messages, you hear only the new messages in chronological order. If there are no new messages, the system plays back all old messages (in chronological order). If there are both new and old messages, you have the option of playing the new or old messages.When playback begins, the total number of messages is announced. Before each message, you hear the day and time of the recording. If the date and time are not set, you hear, Ö¼À¸´Á··´Ç¸ÁÂÇƸÇ×µ¸¹ÂŸÿ´Ìµ´¶¾ì¸ÅÇ»¸last message, you hear, “End of messages.” If the recording time is less than three minutes, you hear, “Less than three minutes to record” before playback (see Message capacity on page 115).To listen to messages at the telephone base:Press /PLAY/STOP on the telephone base to listen to the messages. f If there are new and old messages, press TCIDor SDIR to select Play new msgs or Play old msgs,then press MENU/SELECT or /PLAY/STOP.f If there are only new or only old messages, they are played automatically.The system announces the number of messages, then begins playback. The message sequence is shown on the telephone base. If there are no recorded messages, the telephone base shows No message and you hear, “You have no message.”To listen to messages on a cordless handset:1. When the handset is in idle mode, press MENU/SELECT to enter the main menu.2. Press MENU/SELECT again to select Play messages.f If there are new and old messages, press TCID or SDIRto select Play new msgs or Play old msgs, then press MENU/SELECT.f If there are only new or only old messages, they are played automatically.The system announces the number of messages, then begins playback. The message sequence is shown on the handset. If there are no recorded messages, the handset shows No message and you hear, “You have no message.”3 New messagesANS ONYou have: >Play new msgs Play old msgs ANS ONCharlie Johnson4-Repeat 6-SkipMSG# 1/310:01AMNEWANS ONAMNEW10:01AM 10/15NEW MSG #1/3Charlie JohnsonNEW>Play new msgs Play old msgs STYou have: 3 New messages
Answering system118Message playbackOptions during playbackWhen a message is playing, you can adjust the playback volume, skip, repeat, pause, stop or delete the message. When messages are playing on the telephone base:f Press VOL Tor VOL S to adjust the message playback volume.f Press /SKIP to skip to the next message.f Press /REPEAT to repeat the message. Press twice to hear the previous message. f Press MUTE/DELETE to delete the message.f Press /PLAY/STOP to stop the playback.f Press /SPEAKER to stop playback. The screen shows Call back?, then press MENU/SELECT,or /SPEAKER to call back the caller if the caller’s number is available. If the dialing format used is not correct, then use the following option to choose the correct dialing format before calling back the caller.f Press MENU/SELECT to pause playback and show the caller ID information, if available. From here, you can press CANCEL to resume playback. You can also press # (pound key) repeatedly to show the desired dialing option (page 72), then press /SPEAKER or MENU/SELECT to call back the caller. If you do not call back within 10 seconds, message playback resumes automatically.When messages are playing on the handset:f Press TCID/VOLUME or SDIR/VOLUME to adjust the message playback volume.f Press 6 to skip to the next message.f Press 4 to repeat the message. Press twice to hear the previous message. f Press MUTE/DELETE to delete the message.f Press 5 or OFF/CANCEL to stop the playback.f Press /SPEAKER to switch between speakerphone mode and handset mode.f Press PHONE/FLASH to stop playback. The screen shows Call back?, then press MENU/SELECT,PHONE/FLASH, or /SPEAKER to call back the caller if the caller’s number is available. If the dialing format used is not correct, then use the following option to choose the correct dialing format before calling back the caller.f Press MENU/SELECT to pause playback and show the caller ID information, if available. From here, you can press OFF/CANCEL to resume playback. You can press # (pound key) repeatedly to show the desired dialing option (page 72), then press PHONE/FLASH or /SPEAKER to call back the caller. If you do not call back within 10 seconds, message playback resumes automatically.Note: The equalizer stays on the same settings until you change it.
Answering system119Message playbackDelete all old messagesYou can only delete old (reviewed) messages. You cannot delete new messages until you review them. You cannot retrieve deleted messages. To delete all old messages on the telephone base:1. When the telephone is idle, press MUTE/DELETE. The screen shows Delete all old messages? and the system announces, ÖÂ·¸¿¸Ç¸´¿¿¿·À¸ÆÆ´º¸Æpress DELETE again.”2. Press MUTE/DELETE again. The system announces, “All old messages deleted.”-OR-1. Press MENU/SELECT when in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys. Press MENU/SELECT.3. Press TCID or SDIR to highlight Delete all old,then press MENU/SELECT. The screen shows Delete all old messages?.4. Press MENU/SELECT again to confirm. The screen displays Deleting... and then All old msgs deleted!.There is a confirmation tone.To delete all old messages on the handset:1. Press MENU/SELECT when in idle mode to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys. Press MENU/SELECT.3. Press TCID or SDIR to highlight Delete all old, then press MENU/SELECT. The screen shows Delete all old messages?.4. Press MENU/SELECT again to confirm. The screen displays Deleting... and then All old msgs deleted!. There is a confirmation tone.Delete allold messages?Deleting... Announcement>Delete all oldST Announcement>Delete all oldDelete allold messages?Deleting...
Answering system120Recording and playing memosMemos are your own recorded messages used as reminders for yourself or others using the same answering system. You can record your own memos using a system handset or the telephone base. Play and delete them in the same way as incoming messages.Record a memoUsing a cordless handset:1. When the handset is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys. Press MENU/SELECT.3. Press TCID or SDIR to highlight Record memo, then press MENU/SELECT. The system announces, “Record after the tone. Press 5 when you are done.” You can record a memo for up to four minutes. 4. Speak towards the handset to record a memo.5. Press 5 to stop recording. The system announces, “Recorded.” The system does not save memos shorter than two seconds.Using the telephone base:1. When the telephone base is in idle mode, press MENU/SELECT to enter the main menu.2. Press TCID or SDIR to scroll to Answering sys, then press MENU/SELECT.3. Press TCID or SDIR to highlight Record memo, then press MENU/SELECT. The system announces, “Record after the tone. Press 5 when you are done.” You can record a memo for up to four minutes.4. Speak towards the telephone base to record a memo.5. Press 5 to stop recording. The system announces, “Recorded.” The system does not save memos shorter than two seconds.Play back a memoPlay memos the same way as messages. See Message playback on page 117. Play messages>Answering sys>Record memo Delete all old5-StopRECORD MEMO... Delete all old>Record memoST>Record memo AnnouncementST
Answering system121Base message counter displaysThe base message counter shows the total number of answering system messages. See the following table for other message counter displays.Message counter displays0No messages.1-99 Total number of messages and memos.--The remote access system is being used.
Answering system122Remote accessYou can reach your answering system remotely by dialing your home telephone number from any touch-tone telephone.To remotely reach your answering system:1. Dial your telephone number from any touch-tone telephone.2. When the system answers, enter the two-digit remote access code (19 is the default code. See page 111 to change it).• The system automatically announces the number of new or old messages (if any), and then begins to play them.3. You can also enter the following remote commands:Remote commands 1 Press to listen to all messages. 2 Press to listen to new messages only. 3 Press to delete the current message (during playback).3 3 Press twice to delete all old messages. 4 Press to repeat the current message (during playback).4 4 Press twice to listen to the previous message. 5 Press to stop any operation (including recording). *5 Press to listen to a list of remote commands. 6 Press to skip to the next message (during playback). *7 Press to record a new announcement. 8 Press to end remote access (the call will be terminated). 0 ©Å¸ÆÆÇÂÇÈÅÁÇ»¸´ÁÆʸżÁºÆÌÆǸÀÂÁÂÅÂæ4. Hang up or press 8 to end the calls.
Answering system123Remote accessCut out and carry the remote access wallet card at the back of this user’s manual for quick reference.Notes:f If you pause for more than four seconds during remote access, you hear a help menu listing all features and commands. If there is no command for another 20 seconds, the call ends automatically.f If the memory is full, the answering system answers after 10 rings and announces, “Memory is full. Enter the remote access code.” Enter your remote access code to access the messages and announcements.f The telephone can respond to remote access code while it is playing the screening announcement or block announcement. This allows you to access your answering system from an unknown number remotely. See Screen calls without numbers on page 96 and Screen uncategorized calls on page 99.
124Adding and registering handsets/headsets/speakerphonesYour telephone can support up to 12 DECT 6.0 cordless handsets, headsets or speakerphones. You can purchase additional handsets (AT&T model CL80107, sold separately) or up to 10 cordless handsets and two cordless headsets or speakerphones (sold separately). Visit www.telephones.att.com/accessories for a list of compatible DECT 6.0 cordless headsets or speakerphones. Each new handset, headset or speakerphone must be registered to the telephone base before use. You must register each handset, headset or speakerphone separately.To register a cordless headset or speakerphone to this telephone system, please refer to the corresponding user’s manual for more details. To register a cordless handset, see below.The handsets provided within your product box are already registered as HANDSET 1, and so forth. Additional handsets are assigned numbers in the sequential order they are registered (up to HANDSET 12). Register a handset to the telephone base1. Before you begin registration, put the handset you wish to register near the telephone base. Make sure the handset shows To register HS, see manual..2. On the telephone base, press MENU/SELECT in idle mode.3. On the telephone base, use TCID or SDIR to scroll to Settings, then press MENU/SELECT.4. On the telephone base, use TCID or SDIR to scroll to Registration, then press MENU/SELECT.5. Press #(pound key) on the handset. Both the handset and the telephone base show Registering... Please waitand the IN USE light turns on. 6. ì¸Å´Ê»¼¿¸µÂÇ»Ç»¸»´Á·Æ¸Ç´Á·Ç»¸Ǹ¿¸Ã»ÂÁ¸base beep and the IN USE¿¼º»ÇÇÈÅÁÆÂæHANDSET X Registered shows on both the handset and telephone base (HANDSET represents the handset name, X represents the handset number). The handset is now registered with the telephone base.If registration fails, Registration failed appears on the handset screen. The handset then shows To register HS, see manual. and the telephone base ŸÇÈÅÁÆÇÂ¼·¿¸À·¸»¼ÆÀ´ÌÇ´¾¸ÈÃÇÂèɸÀ¼ÁÈǸÆÇÂ¶¶ÈÅ©¿¸´Æ¸ÆÇ´ÅÇagain from Step 1.Notes: f You cannot register a handset if any other system handset is in use.f If you try to register more than 12 handsets to the telephone base, the telephone base shows Registration slots are fulland sounds two beeps. AppendixTo register HS,see manual.Registering...Please waitHANDSET XRegistered
Appendix125Deregistering handsetsYou may need to deregister your handsets if:f You have 12 registered handsets and need to replace a handset.-OR-f You wish to change the designated handset number of your registered handsets.²ÂÈÀÈÆÇèÅÆÇ·¸Å¸º¼ÆǸÅ¥¥»´Á·Æ¸ÇÆ´Á·Ç»¸ÁŸº¼ÆǸÅ¸´¶»»´Á·Æ¸ÇÌÂÈwish to use again, one at a time.Please read carefully through all the instructions on this page before beginning the deregistration process.Deregister all handsets from the telephone baseIn addition to the cordless handsets, this operation will also deregister all cordless headsets and speakerphones registered to your telephone base.1. Make sure that all handsets are out of the chargers before you begin deregistration.2. Press and hold /FIND HS on the telephone base for about 10 seconds. The IN USE¿¼º»ÇÇÈÅÁÆÂÁ´ì¸Å´µÂÈÇ¹ÂÈÅƸ¶ÂÁ·ÆKeep holding /FIND HS until the screen shows Deregister all devices? and the IN USE light µ¸º¼ÁÆÇÂë´Æ»«¸¿¸´Æ¸ /FIND HS.3. Immediately press /FIND HS or MENU/SELECT while the IN USE¿¼º»Ç¼ÆÆǼ¿¿ë´Æ»¼Áº¢¹Ç»¸¿¼º»ÇÆÇÂÃÆë´Æ»¼ÁºÆÇ´ÅÇ´º´¼Áʼǻ¬Ç¸Ã1.)4. It takes up to 10 seconds to complete the deregistration process. Before registering the handset again, wait for the cordless handset screen to display To register HS, see manual..5. To register the handset(s) to the telephone base again, follow the registration instructions on the previous page. Notes:f If the deregistration process fails, you may need to reset the system and try again. To reset, unplug the power from the telephone base and plug it back in.f You cannot deregister the handsets if any other system handset is in use. Any call activity will cancel the deregistration process.f Even if the battery is depleted, you can still deregister the handsets by following the steps mentioned above. After the handset is charged for at least 10 minutes, the screen shows To register HS, see manual..
Appendix126Alert tones and lightsHandset screen iconsBattery status - battery is charging (animated display).Battery status¿ÂÊµ´ÇǸÅÌë´Æ»¼Áºÿ´¶¸Ç»¸»´Á·Æ¸Çin the charger to recharge. Speakerphone - the speakerphone is in use.«¼Áº¸ÅÂæÇ»¸»´Á·Æ¸ÇżÁº¸Å¼ÆÂæNew voicemail - you have new voicemail from your telephone service provider.ANS ON Answering system on - the answering system is turned on to answer calls. Message - new message in the built-in answering system.NEW New caller ID log - new and missed calls.MUTE MUTEÇ»¸»´Á·Æ¸ÇÀ¼¶ÅÂûÂÁ¸¼ÆÂæMessage counter - number of message playing/total number of messages.Telephone base screen icons«¼Áº¸ÅÂæÇ»¸Ǹ¿¸Ã»ÂÁ¸µ´Æ¸żÁº¸Å¼ÆÂæNew voicemail - you have new voicemail from your telephone service provider.NEW New caller ID log - new and missed calls.Message counter - Total number of messages.MSG # 110:21PM 10/15MSG # 1NEWNEWMSG # 1/2MSG# 1/310:01AMNEWANS ONMUTE
Appendix127Alert tones and lightsHandset alert tonesOne short beep Tone of each key press, if key tone is turned on. One long beep Indication to begin recording a message, memo or announcement. Two short beeps You are pressing TCID or SDIR on a cordless handset when the volume is already at its highest or lowest setting. -OR-Call waiting tone. -OR-Error tone.ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸(three rising tones)The system has completed the command successfully.Four beeps The other party has ended your intercom call.-OR-The handset has gone out of range from the base during a call.Four short beeps Low battery warning.Telephone base alert tonesOne short beep Tone of each key press, if key tone is turned on. One long beep Indication to begin recording a message, memo or announcement.Indicates the start of message recording during call screening or the end of a message playback session. Two short beeps You are pressing VOL Sor VOL Ton the telephone base when the volume is already at its highest or lowest setting. -OR-Call waiting tone. -OR-Error tone.-OR-Registration slots are full.ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸(three rising tones)The system has completed the command successfully.Four beeps The other party has ended your intercom call.Four short beeps Registration failure tone.Beeps every 10 secondsMessage alert.
Appendix128Alert tones and lightsLightsIN USEOn when the telephone base is in use, or when the answering system is answering an incoming call.On when a handset is being registered.Flashes quickly when there is an incoming call or when handsets are being deregistered.Flashes when another telephone is in use on the same line.CHARGEOn when the handset is charging in the charger./SPEAKEROn when the speakerphone is on.Lighted displayLighted key pad/ANS ON/OFFOn when the answering system is on./PLAY/STOPOn when a message is being played.Flashes when there are new messages.MUTE/DELETEOn when the microphone is muted./SPEAKEROn when the speakerphone is on.
Appendix129Screen display messagesScreen messagesAdded to allow listAn entry has been added to the allow list.Added to block listAn entry has been added to the block list.Added to star name listAn entry has been added to the star name list.BASE 0is callingThe telephone base is calling.BaseCheck AC power»¸µ´Æ¸ÔÆ¶ÂÅ·¸·»´Á·Æ¸Ç¼Æ¿¼ì¸··ÈżÁº´ÁÃÂʸÅ¹´¼¿ÈŸIf there is an AC power failure, it is still possible to dial out and receive incoming calls using the corded handset.Blocked call An incoming call is blocked.Block list is emptyThere are no call block entries.Call block screeningThe telephone is screening an incoming call.CalltransferredYou have transferred an outside call to another device.Caller ID logemptyThere are no entries in the caller ID log.CallingBASE 0The handset is calling the telephone base (for intercom calls).Calling HANDSET X The handset or telephone base is calling another handset (for intercom calls).The telephone base is transferring an outside call to a handset.Call answered The answering system has answered an incoming call.Contact deleted A directory entry is deleted. Directory empty There are no directory entries.Directory full The directory is full. You cannot save any new entries unless you delete some current entries.Ended You have just ended a call.HANDSET Xis callingAnother system handset is calling.Incoming call There is an incoming call.Intercom The device is on an intercom call.Intercom ended The intercom call has just ended.INTERCOM TO: You have started the intercom process, and need to enter the number of the device you wish to call.Line in use An extension phone, or one of the devices is in use.
Appendix130Screen display messagesScreen messagesLow battery The battery is low. You should charge the battery.Microphone ON ¦ÈǸ¼ÆÂæÆÂÇ»¸ÂÇ»¸ÅôÅÇÌ¶´Á»¸´ÅÌÂÈÅɼ¶¸Muted »¸À¼¶ÅÂûÂÁ¸¼ÆÂæ»¸ÂÇ»¸ÅôÅÇÌ¶´ÁÁÂÇ»¸´ÅÌÂÈNew voicemail There are new voicemail messages from your telephone service provider.No battery The handset in the charger has no battery installed.No line There is no telephone line connection.No answer. Tryagain.The device(s) you are trying to transfer a call to is out of range, Âæ»Â¾ÂÅ»´ÆÁÂÃÂʸÅNo caller info The caller information is unavailable.Number alreadysavedThe telephone number you have entered is already in the directory.Not availableat this timeSomeone else is already using the directory or caller ID log.No Incoming PTT »¸¼Á¶ÂÀ¼Áº©¹ÈÁ¶Ç¼ÂÁ¼ÆÇÈÅÁ¸·Âæ»¸»´Á·Æ¸Çʼ¿¿ÁÂÇreceive PTT calls.Out of range ORNo pwr at baseThe telephone base has lost power, or the handset is out of range.** Paging ** The cordless handset is paged by the telephone base.Paging allhandsetsThe telephone base is paging all cordless handsets.Phone The handset or telephone base is on a call.Place in charger The battery is very low. The handset should be charged.Quiet mode on QUIET mode is on.Quiet mode is off ª®¢À·¸¼ÆÇÈÅÁ¸·ÂæRec mem full The system recording memory is full.Rec mem low The system recording time is running short.Recording message The telephone is recording a message.Registering...Please waitHandset registration is in progress.Registrationslots are fullThe telephone base has the maximum of 12 handsets registered to it.Registration failed The handset registration is not successful.Ringer off »¸żÁº¸Å¼ÆÇÈÅÁ¸·ÂæRinger muted »¸żÁº¸Å¼ÆÂæǸÀÃÂŴż¿ÌÊ»¼¿¸Ç»¸·¸É¼¶¸¼ÆżÁº¼Áº
Appendix131Screen display messagesScreen messagesSaved to directoryAn entry has been successfully saved in the directory.Screened call The telephone has collected the caller’s name and is waiting for you to pick up the call.Setup Ans sys... The telephone base is playing voice guide.Speaker The handset or telephone base speakerphone is in use.TRANSFER TO: You have started transferring a call, and need to enter the desired device number or choose all devices.To register HS,see manual.Screen display before handset registration.To screen call, press [SELECT]Press MENU/SELECT to activate call screening on the handset.Unable to call. Line in useFailed phone call (the telephone line is in use). Unable to call. Try againYou try to join a call when there are already four handsets on that call.You try to make an outside call when another device is transferring a call with the intercom feature.XX Missed calls There are new calls in the caller ID log.XX New messages There are new messages in the answering system.
Appendix132Troubleshooting¢¹ÌÂÈ»´É¸·¼ï¶È¿ÇÌʼǻÌÂÈÅûÂÁ¸ÿ¸´Æ¸ÇÅÌÇ»¸¹Â¿¿ÂʼÁºÆȺº¸ÆǼÂÁÆFor Customer Service, visit our website at www.telephones.att.com orcall 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.My telephone doesn’t work at all.f Make sure the power cord is securely plugged in.f Make sure you plug the battery connector securely into the cordless handset.f ¦´¾¸ÆÈŸÌÂÈÿȺÇ»¸Ǹ¿¸Ã»ÂÁ¸¿¼Á¸¶ÂÅ·Ƹ¶ÈŸ¿Ì´Á·èÅÀ¿Ì¼ÁÇÂÇ»¸telephone base and the telephone wall jack.f Charge the battery in the cordless handset for at least 10 hours. For optimum daily performance, return the cordless handset to the charger when not in use.f If the battery is depleted, it may take approximately 30 minutes to charge the handset before it shows Low battery. See page 10 for details. f Reset the telephone base. Unplug the electrical power. Wait for approximately 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.f You may need to purchase a new battery. Please refer to Battery installation and charging in this user’s manual on pages 10-11.The display shows No line. I cannot get a dial tone.f Try all the suggestions, as mentioned above.f If the previous suggestions do not work, disconnect the telephone line cord from your telephone and connect the telephone line cord to another telephone.f If there is no dial tone on that other telephone either, your telephone line cord may be defective. Install a new telephone line cord.f If changing the telephone line cord does not help, the wall jack (or Ç»¸ʼżÁºÇÂÇ»¼ÆÊ´¿¿½´¶¾À´Ìµ¸·¸¹¸¶Ç¼É¸ÅÌÈƼÁº´·¼æ¸Å¸ÁÇÊ´¿¿jack in your home to connect your CL84107/CL84207/CL84257/CL84307/CL84357 telephone, or contact your telephone service provider (charges may apply).I cannot dial out.f Try all the suggestions, as mentioned above.f Make sure you have a dial tone before dialing. The cordless handset may Ç´¾¸´Ƹ¶ÂÁ·ÂÅÇÊÂÇÂèÁ·Ç»¸Ǹ¿¸Ã»ÂÁ¸µ´Æ¸´Á·ÃÅ·ȶ¸´·¼´¿ÇÂÁ¸This is normal. Wait an extra second before dialing.
Appendix133Troubleshootingf Eliminate any background noise. Noise from a television, radio or other appliances may cause the phone to not dial out properly. If you cannot ¸¿¼À¼Á´Ç¸Ç»¸µ´¶¾ºÅÂÈÁ·Á¼ƸèÅÆÇÇÅÌÀÈǼÁºÇ»¸¶ÂÅ·¿¸ÆÆ»´Á·Æ¸Çbefore dialing, or dialing from another room with less background noise.f If other phones in your home are having the same problem, contact your telephone service provider (charges may apply).My cordless handset isn’t performing normally.f Make sure you plug the power cord securely into the telephone base. Plug the ÃÂʸÅ´·´ÃǸÅ¼ÁÇÂ´·¼æ¸Å¸ÁÇÊž¼Áº¸¿¸¶Çż¶´¿ÂÈÇ¿¸ÇʼǻÂÈÇ´Ê´¿¿ÆʼǶ»f Move the cordless handset closer to the telephone base. You may have moved out of range.f Reset the telephone base. Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.f Other electronic products such as HAM radios and other DECT phones, can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.Out of range OR No pwr at base appears on my cordless handset.f Ensure you plug the telephone base in properly and the power is on.f Place the cordless handset closer to the telephone base for synchronization. f Move the cordless handset closer to the telephone base. You may have moved out of range.f Reset the telephone base. Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.f Other electronic products such as HAM radios and other DECT phones, can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.The batteries do not hold a charge.f If the cordless handset is in the charger and the charge light is not on, refer to »¸¶»´Åº¸¿¼º»Ç¼ÆÂæ (page 133).f Charge the battery in the cordless handset for at least 10 hours. For optimum daily performance, return the cordless handset to the charger when not in use.f If the battery is depleted, it may take approximately 30 minutes to charge the handset before it shows Low battery. Refer to the table on page 10 for details.f You may need to purchase a new battery. Please refer to Battery installation and charging in this user’s manual on pages 10-11.
Appendix134TroubleshootingI get noise, static, or weak signals even when I’m near the telephone base.f If you subscribe to high-speed Internet service (DSL - digital subscriber ¿¼Á¸Ç»ÅÂȺ»ÌÂÈÅǸ¿¸Ã»ÂÁ¸¿¼Á¸ÌÂÈÀÈÆÇ¼ÁÆÇ´¿¿´¬¥è¿Ç¸Åµ¸Çʸ¸ÁÇ»¸Ǹ¿¸Ã»ÂÁ¸¿¼Á¸¶ÂÅ·´Á·Ç»¸Ǹ¿¸Ã»ÂÁ¸Ê´¿¿½´¶¾ôº¸%»¸è¿Ç¸Åprevents noise and caller ID problems as a result of DSL interference. Please contact your DSL service provider for more information about ¬¥è¿Ç¸ÅÆf You may be able to improve the performance of your cordless phone by installing your new telephone base as far as possible from any other existing cordless telephone system that may already be installed.f Other electronic products such as HAM radios and other DECT phones, can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.f Do not install this phone near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating.f If you plug your phone in with a modem or a surge protector, plug the ûÂÁ¸ÂÅÀ·¸ÀÆÈź¸ÃÅÂǸ¶ÇÂÅ¼ÁÇÂ´·¼æ¸Å¸ÁÇ¿Â¶´Ç¼ÂÁ¢¹Ç»¼Æ·Â¸Ænot solve the problem, relocate your phone or modem farther apart from ÂÁ¸´ÁÂÇ»¸ÅÂÅÈƸ´·¼æ¸Å¸ÁÇÆÈź¸ÃÅÂǸ¶ÇÂÅf Move your phone to a higher location. The phone may have better reception in a high area.f If other phones in your home are having the same problem, contact your telephone service provider (charges may apply).I experience poor sound quality when using the handset speakerphone. f For increased sound quality while using the handset speakerphone, place Ç»¸»´Á·Æ¸ÇÂÁ´ë´ÇÆÈŹ´¶¸ʼǻÇ»¸·¼´¿ô·¹´¶¼ÁºÈÃI hear other calls while using my phone.f Disconnect the telephone base from the telephone jack, and plug in a ·¼æ¸Å¸ÁÇǸ¿¸Ã»ÂÁ¸¢¹ÌÂÈÆǼ¿¿»¸´ÅÂÇ»¸Å¶´¿¿Æ¶´¿¿ÌÂÈÅǸ¿¸Ã»ÂÁ¸service provider.My cordless handset does not ring when I receive a call.f ¦´¾¸ÆÈŸÇ»´ÇÇ»¸żÁº¸Å¼ÆÁÂÇÂæ«¸¹¸ÅÇÂRinger volume on page 19 in this user’s manual. f Make sure you plug in the telephone line cord securely into the telephone base and the telephone jack. Make sure you plug in the power cord securely.f The cordless handset may be too far from the telephone base.
Appendix135Troubleshootingf Charge the battery in the cordless handset for at least 10 hours. For optimum daily performance, return the cordless handset to the charger when not in use.f You may have too many extension phones on your telephone line to allow all of them to ring simultaneously. Try unplugging some of the other phones.f »¸¿´ÌÂÈÇ¹ÌÂÈÅ»ÂÀ¸ÂÅÂﶸÀ´Ìµ¸¿¼À¼Ç¼ÁºÇ»¸ÂøŴǼÁºÅ´Áº¸Try moving the telephone base to another location, preferably to a higher location.f If other phones in your home are having the same problem, contact your telephone service provider (charges may apply).f Test a working phone at the phone jack. If another phone has the same problem, contact your telephone service provider (charges may apply).f Other electronic products can cause interference with your cordless phone. Try installing your phone as far away as possible from electronic devices such as television sets, VCRs, or other cordless telephones.f Remove the battery. Install the battery again and place the cordless handset in the charger. Wait for the cordless handset to reestablish its connection with the telephone base. Allow up to one minute for this to take place. f Your line cord may be defective. Try installing a new line cord.My calls cut in and out while I’m using my cordless handset.f Other electronic products such as HAM radios and other DECT phones, can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.f Do not install this phone near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating.f If you plug your phone in with a modem or surge protector, plug the phone ÂÅÀ·¸ÀÆÈź¸ÃÅÂǸ¶ÇÂÅ¼ÁÇÂ´·¼æ¸Å¸ÁÇ¿Â¶´Ç¼ÂÁ¢¹Ç»¼Æ·Â¸ÆÁÂÇsolve the problem, relocate your phone or modem farther apart from one ´ÁÂÇ»¸ÅÂÅÈƸ´·¼æ¸Å¸ÁÇÆÈź¸ÃÅÂǸ¶ÇÂÅf Move your telephone base to a higher location. The phone may have better reception when installed in a high area.f If other phones in your home are having the same problem, contact your telephone service provider (charges may apply).
Appendix136Troubleshooting »¸¶»´Åº¸¿¼º»Ç¼ÆÂæf Make sure you plug the power and line cords in correctly and securely.f Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.f Clean the cordless handset, charger’s charging contacts each month with a pencil eraser or cloth.f The battery may not be connected to the handset or is missing completely. Ensure that the battery is installed properly.My caller ID isn’t working.f Caller ID is a subscription service. You must subscribe to this service from your telephone service provider for this feature to work on your phone.f The caller may not be calling from an area that supports caller ID.f Both your and your caller’s telephone service providers must use caller ID compatible equipment.f If you subscribe to high-speed Internet service (DSL - digital subscriber ¿¼Á¸Ç»ÅÂȺ»ÌÂÈÅǸ¿¸Ã»ÂÁ¸¿¼Á¸ÌÂÈÀÈÆÇ¼ÁÆÇ´¿¿´¬¥è¿Ç¸Åµ¸Çʸ¸ÁÇ»¸Ǹ¿¸Ã»ÂÁ¸¿¼Á¸¶ÂÅ·´Á·Ç»¸Ǹ¿¸Ã»ÂÁ¸Ê´¿¿½´¶¾ôº¸%»¸è¿Ç¸Åprevents noise and caller ID problems resulting from DSL interference. Please contact your DSL service provider for more information about ¬¥è¿Ç¸ÅÆSystem does not receive caller ID when on a call.f Make sure you subscribe to caller ID with call waiting features from your telephone service provider. The caller ID feature works only if both you ´Á·Ç»¸¶´¿¿¸Å´Å¸¼Á´Å¸´ÆÂæ¸Å¼Áº¶´¿¿¸Å¢ƸÅɼ¶¸´Á·¼¹µÂÇ»Ǹ¿¸Ã»ÂÁ¸service providers use compatible equipment.System screens all my incoming calls.f Smart call blocker is set to on by default. If your directory, allow list ´Á·µ¿Â¶¾¿¼ÆÇ´Å¸¸ÀÃÇÌ´¿¿¶´¿¿Æʼ¿¿µ¸¶¿´ÆƼ踷´ÆÈÁ¾ÁÂÊÁ¶´¿¿Æ»¸telephone will screen all calls and asks callers to announce their names. We recommend that you set up your directory, allow list and block list before using your telephone with the Smart call blocker feature. See Block list on page 79 and Allow list on page 83.f ÂÇÈÅÁ¬À´ÅÇ¶´¿¿µ¿Â¶¾¸ÅÂæƸ¸¬¸Ç¬À´ÅÇ¶´¿¿µ¿Â¶¾¸ÅÂÁÂæ on page 78.
Appendix137Troubleshooting While screening a call, the telephone suddenly stops screening and connects to the call.f Another handset may have picked up the screening call.f If you have other telephone system sharing the same telephone line, and someone picks up the call on the other telephone system while the screening is in progress, the screening process will be terminated and connect you to the caller.My telephone blocks calls from someone I know.f Check if you have saved the caller’s number in your block list. If yes, remove the number from the list. See Delete a block entry on page 84.Blocking calls with numbers saved in my block list only.f If you want to block calls with numbers saved in your block list only, and allow all other calls to get through to you, change the settings to accept calls without numbers and other calls. See Control calls without numberson page 70 and Control other calls on page 71.Blocking all unknown calls.f If you want to block all unknown calls with numbers that are not in your directory or allow list, change the settings to block calls without numbers and other calls. See Control calls without numbers on page 70 and Control other calls on page 71.Forwarding all unknown calls to the answering system.f If you want to forward all unknown calls with numbers that are not in your directory or allow list to the answering system, see Control calls without numbers on page 70 and Control uncatergorized calls on page 71 to change the settings. Incomplete messages.f If a caller leaves a very long message, part of it may be lost when the system ·¼Æ¶ÂÁÁ¸¶ÇÆÇ»¸¶´¿¿´ì¸ÅÇ»¸À´Ë¼ÀÈÀŸ¶ÂÅ·¼ÁºǼÀ¸ÌÂÈ»´É¸ƸÇf If the caller pauses for longer than seven seconds, the system stops recording and disconnects the call.f If the system’s memory becomes full during a message, the system stops recording and disconnects the call.f ¢¹Ç»¸¶´¿¿¸ÅÔÆɼ¶¸¼ÆɸÅÌÆÂìÇ»¸ÆÌÆǸÀÀ´ÌÆÇÂÃŸ¶ÂÅ·¼Áº´Á·disconnect the call.
Appendix138Troubleshooting¼ï¶È¿ÇÌ»¸´Å¼ÁºÀ¸ÆÆ´º¸Æf Press VOL S to increase the telephone base speaker volume.f Press SDIR/VOLUME to adjust the message playback volume on a handset.¬ÌÆǸÀ·Â¸ÆÁÂÇ´ÁÆʸÅ´ì¸ÅÇ»¸¶ÂÅŸ¶ÇÁÈÀµ¸Å¹żÁºÆ• Make sure that the answering system is on. ANS ON should show on the handset and the /ANS ON/OFF light on the telephone base should be on.• If toll saver is activated, the number of rings changes to two when you have new messages stored (page 110).• If the memory is full or the system is off, the system will answer after 10 rings.f ¢ÁÆÂÀ¸¶´Æ¸ÆÇ»¸´ÁÆʸżÁºÆÌÆǸÀ¼Æ´æ¸¶Ç¸·µÌÇ»¸żÁº¼ÁºÆÌÆǸÀused by your telephone service provider.f If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail (page 110). To determine how many rings activate your voicemail, contact your telephone service provider.f If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems.System does not respond to remote commands.• Make sure to enter your remote access code correctly (page 111).• Make sure you are calling from a touch-tone phone. When you dial a number, you should hear tones. If you hear clicks, the phone is not a touch-tone telephone and cannot activate the answering system.• The answering system may not detect the remote access code while your announcement is playing. Try waiting until the announcement is over before entering the code.• There may be interference on the phone line you are using. Press dialing keys firmly.
Appendix139TroubleshootingSystem does not record messages.• Make sure the answering system is on. ANS ON should show on the handset and the /ANS ON/OFF light on the telephone base should be on.• Make sure the memory of the answering system is not full.f If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail (page 110). To determine how many rings activate your voicemail, contact your telephone service provider.f If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems.System announces, “Time and day not set.”• You need to reset the system clock (page 20 or page 31).Outgoing announcement is not clear.• When you record your announcement, make sure you speak in a normal tone of voice, about nine inches from the handset or the telephone base.• Make sure there is no background noise (TV, music, etc.) while recording.New voicemail and show on the screens, and I don’t know why.•Your telephone has both a built-in answering system and voicemail indicator. If New voicemail and appear on the screens, then your telephone has received a signal from your telephone service provider that you have a voicemail message waiting for you to retrieve from them. Contact your telephone service provider for more information on how to access your voicemail.I cannot retrieve voicemail messages.•Your telephone has both a built-in answering system and voicemail indicator. They are independent features and each alerts you to new À¸ÆÆ´º¸Æ·¼æ¸Å¸ÁÇ¿Ìôº¸ ¢¹ÌÂÈÆȵƶżµ¸ÇÂɼ¶¸À´¼¿ƸÅɼ¶¸from your telephone service provider, contact your telephone service provider for more information on how to access your voicemail.I’ve set my LCD language to Spanish or French and I don’t know how to change it back to English.• Press MENU/SELECT once on your handset or base. Then, on the handset or base enter 364#. You hear a confirmation tone.
Appendix140TroubleshootingI subscribe to a nontraditional telephone service that uses my computer to establish connections, and my telephone doesn’t work.f Make sure your computer is powered on.f Make sure your Internet connection is working properly.f ¦´¾¸ÆÈŸÇ»´ÇÇ»¸ÆÂìʴŸ¼Æ¼ÁÆÇ´¿¿¸·´Á·ÅÈÁÁ¼Áº¹ÂÅÌÂÈÅÁÂÁÇÅ´·¼Ç¼ÂÁ´¿telephone service. f Make sure to plug your USB telephone adapter into a dedicated USB port on your computer. Do not plug it into a multiple port USB hub (USB splitter) that is not powered.f In a few rare instances, the USB port on your computer may not have enough power. Try using a USB hub with its own external power supply.f ¢¹ÌÂÈ´Å¸ÈƼÁº´èŸʴ¿¿¼ÇÀ´ÌßɸÁÇ´¶¶¸ÆÆÇÂÌÂÈÅnontraditional telephone service provider. Contact your service provider for more information.Common cure for electronic equipment.If the telephone does not seem to be responding normally, try putting Ç»¸¶ÂÅ·¿¸ÆÆ»´Á·Æ¸Ç¼ÁÇ»¸¶»´Åº¸Å¢¹¼Ç·Â¸ÆÁÂÇèËÇ»¸Ãŵ¿¸À·ÂÇ»¸following (in the order listed):1. Disconnect the power to the telephone base.2. Disconnect the cordless handset battery.3. Wait a few minutes.4. Connect power to the telephone base.5. Remove the battery. Replace the battery and place the cordless handset into the charger.6. Wait for the cordless handset to reestablish its connection with the telephone base. Allow up to one minute for this to take place.
Appendix141MaintenanceTaking care of your telephonef Your cordless telephone contains sophisticated electronic parts, so you must treat it with care.f Avoid rough treatment. f Place the handset down gently. f Save the original packing materials to protect your telephone if you ever need to ship it.Avoid waterf You can damage your telephone if it gets wet. Do not use the handset in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower.Electrical stormsf Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electric appliances during storms.Cleaning your telephonef Your telephone has a durable plastic casing that should retain its luster for À´ÁÌ̸´ÅÆ¿¸´Á¼ÇÂÁ¿Ìʼǻ´ÆÂì¶¿ÂÇ»Æ¿¼º»Ç¿Ì·´ÀøÁ¸·ʼǻʴǸÅÂÅmild soap.f Do not use excess water or cleaning solvents of any kind.Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the telephone base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL. Pull the unit out by the unplugged cords.
Appendix142Important safety informationThis symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this ÃÅ·ȶÇÇÂŸ·È¶¸Ç»¸żƾ¹¼Á½ÈÅÌèŸÂÅ¸¿¸¶Çż¶ƻ¶¾Safety informationf Read and understand all instructions in the user’s manual. Observe all markings on the product.f Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning.f Do not use a telephone in the vicinity of a gas leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. In an inadequately ventilated environment, the user should not plug the phone into a power outlet, nor put a charged handset into the cradle where there are concentrations ¹ë´ÀÀ´µ¿¸ÂÅë´À¸ÆÈÃÃÂÅǼÁºº´Æ¸ÆÆôž¼ÁÆȶ»´Á¸ÁɼÅÂÁÀ¸ÁÇ¶ÂÈ¿·¶Å¸´Ç¸´èŸÂÅ¸ËÿÂƼÂÁ¬È¶»¸ÁɼÅÂÁÀ¸ÁÇÆÀ´Ì¼Á¶¿È·¸À¸·¼¶´¿ÈƸ¹ÂË̺¸ÁʼǻÂÈÇ´·¸ÄȴǸventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc.f Do not use this product near water or when you are wet. For example, do not use it in a wet basement or shower, nor next to a swimming pool, bathtub, kitchen sink, and laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product comes in contact with any liquid, unplug any line or power cord immediately. Do not plug the product back in until it has dried thoroughly.f Install this product in a protected location where no one can trip over any line or power cords. Protect cords from damage or abrasion.f If this product does not operate normally, see the Troubleshooting section on pages 132- 140 of this user’s manual. If you cannot solve the problem, or if the product is damaged, refer to the Limited warranty section on pages 147- 148. Do not open this product except as directed in your user’s manual. Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks.f Replace batteries only as described in your user’s manual (pages 10- 11). Do not burn or puncture batteries — they contain caustic chemicals.f »¸ÃÂʸÅ´·´ÃǸÅÆ´Å¸¼ÁǸÁ·¸·ÇÂµ¸¶ÂÅŸ¶Ç¿ÌÂż¸ÁǸ·¼Á´ɸÅǼ¶´¿ÂÅëÂÂÅÀÂÈÁÇposition. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.f For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.Cautions:f Use only the power adapters provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.f Use only the supplied rechargeable battery or replacement battery (model BT183342/BT283342). To order, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.f ÂßɸÁÇżƾ¹èŸÂÅµ´ÇǸÅÌ¸ËÿÂƼÂÁŸÿ´¶¸ʼǻÇ»¸¶ÂÅŸ¶Çµ´ÇǸÅÌÇÌø¼ÆÃÂƸ¹used batteries according to the instructions.
Appendix143Important safety informationEspecially about cordless telephonesf Privacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone base and the handset by radio waves, so there is a possibility that your cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones.f Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet which is not controlled by a wall switch. Calls cannot be made from the handset ¼¹Ç»¸Ǹ¿¸Ã»ÂÁ¸µ´Æ¸¼ÆÈÁÿȺº¸·ÆʼǶ»¸·ÂæÂÅ¼¹Ç»¸¸¿¸¶Çż¶´¿ÃÂʸÅ¼Æ¼ÁǸÅÅÈÃǸ·f Potential TV interference: Some cordless telephones operate at frequencies that may cause interference to TVs and VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is ¸Ëøż¸Á¶¸·ÀÂɼÁºÇ»¸¶ÂÅ·¿¸ÆÆǸ¿¸Ã»ÂÁ¸¹´ÅÇ»¸Å´Ê´Ì¹ÅÂÀÇ»¸¯ÂÅ¯«ʼ¿¿Âì¸ÁŸ·È¶¸or eliminate the interference. f Rechargeable batteries: This product contains nickel-metal hydride rechargeable batteries. Exercise care in handling batteries in order not to create a short circuit with conductive material such as rings, bracelets and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger.f Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.The RBRC Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickel-metal hydride rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center. You may call 1-800-8-BATTERY for locations accepting spent Ni-MH batteries.RBRC and 1-800-8-BATTERY are registered trademarks of the Rechargeable Battery Recycling Corporation.Precautions for users of implanted cardiac pacemakersCardiac pacemakers (applies only to digital cordless telephones): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:Pacemaker patientsShould keep wireless telephones at least six inches from the pacemaker.Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON.Should use the wireless telephone at the ear opposite the pacemaker.WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones.ECO modeThis power conserving technology reduces power consumption for optimal battery performance. The ECO mode activates automatically whenever the handset is synchronized with the telephone base.Especially about telephone answering systemsÊÂÊ´ÌŸ¶ÂÅ·¼Áº»¼ÆÈÁ¼Ç ·Â¸Æ ÁÂÇÆÂÈÁ·Ê´ÅÁ¼Áº µ¸¸ÃÆ ÇÂ¼Á¹ÂÅÀ Ç»¸ÂÇ»¸ÅôÅÇÌÇ»´ÇÇ»¸call is being recorded. To ensure that you are in compliance with any federal or state regulations regarding recording a telephone call, you should start the recording process and then inform the other party that you are recording the conversation.SAVE THESE INSTRUCTIONS
Appendix144FCC Part 68 and ACTAThis equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this ¸ÄȼÃÀ¸ÁÇ¶ÂÁÇ´¼ÁÆ´ÀÂÁºÂÇ»¸ÅÇ»¼ÁºÆ´ÃÅ·ȶÇ¼·¸ÁǼè¸Å¼ÁÇ»¸¹ÂÅÀ´Ç®¬ª±±±±»¼Æ¼·¸ÁǼè¸ÅÀÈÆÇµ¸ÃÅÂɼ·¸·ÇÂÌÂÈÅǸ¿¸Ã»ÂÁ¸ƸÅɼ¶¸ÃÅÂɼ·¸ÅÈÃÂÁŸÄȸÆÇThe plug and jack used to connect this equipment to premises wiring and the telephone network must comply with the applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See the installation instructions in the user’s manual.The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is ¸Á¶Â·¸·´ÆÇ»¸"Ç»´Á·#Ç»¶»´Å´¶Ç¸ÅÆ¹Â¿¿ÂʼÁºÇ»¸®¬¼ÁÇ»¸ÃÅ·ȶÇ¼·¸ÁǼè¸Å¸º¼¹¼ÆÇ»¸«§¼Æ¢ÁÀÂÆÇµÈÇÁÂÇ´¿¿´Å¸´ÆÇ»¸ÆÈÀ¹´¿¿«§ÆÆ»ÂÈ¿·µ¸èɸ!ÂÅ¿¸ÆÆÂÅÀŸinformation, please contact your telephone service provider.This equipment must not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable the alarm equipment, ¶ÂÁÆÈ¿ÇÌÂÈÅǸ¿¸Ã»ÂÁ¸ƸÅɼ¶¸ÃÅÂɼ·¸ÅÂÅ´ÄÈ´¿¼è¸·¼ÁÆÇ´¿¿¸ÅIf this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited warranty.If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to ÁÂǼ¹ÌÌÂÈµ¸¹ÂŸ¼ÁǸÅÅÈÃǼÁºƸÅɼ¶¸¢¹´·É´Á¶¸ÁÂǼ¶¸¼ÆÁÂÇÃÅ´¶Ç¼¶´¿ÌÂÈʼ¿¿µ¸ÁÂǼ踷´ÆÆÂÂÁas possible. You will be given the opportunity to correct the problem and the telephone service ÃÅÂɼ·¸Å¼ÆŸÄȼŸ·ÇÂ¼Á¹ÂÅÀÌÂÈ¹ÌÂÈÅżº»ÇÇÂ迸´¶ÂÀÿ´¼ÁÇʼǻÇ»¸²ÂÈÅǸ¿¸Ã»ÂÁ¸service provider may make changes in its facilities, equipment, operation, or procedures that could ´æ¸¶ÇÇ»¸ÃÅÂøÅ¹ÈÁ¶Ç¼ÂÁ¼Áº¹Ç»¼ÆÃÅ·ȶÇ»¸Ǹ¿¸Ã»ÂÁ¸ƸÅɼ¶¸ÃÅÂɼ·¸Å¼ÆŸÄȼŸ·ÇÂÁÂǼ¹Ìyou if such changes are planned.If this product is equipped with a corded or cordless handset, it is hearing aid compatible.If this product has memory dialing locations, you may choose to store emergency telephone ÁÈÀµ¸ÅÆ¸ºÿ¼¶¸èŸÀ¸·¼¶´¿¼ÁÇ»¸Æ¸¿Â¶´Ç¼ÂÁÆ¢¹ÌÂÈ·ÂÆÇŸÂÅǸÆÇ¸À¸Åº¸Á¶Ìnumbers, please:«¸À´¼ÁÂÁÇ»¸¿¼Á¸´Á·µÅ¼¸ëÌ¸Ëÿ´¼ÁÇ»¸Ÿ´ÆÂÁ¹ÂÅÇ»¸¶´¿¿µ¸¹ÂŸ»´Áº¼ÁºÈÃ©¸Å¹ÂÅÀÆȶ»´¶Ç¼É¼Ç¼¸Æ¼ÁÂæø´¾»ÂÈÅÆÆȶ»´Æ¸´Å¿ÌÀÂÅÁ¼ÁºÂÅ¿´Ç¸¸É¸Á¼ÁºIndustry CanadaThis device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Privacy of communications may not be ensured when using this telephone.»¸ǸÅÀÓÔ¢ÓÔµ¸¹ÂŸÇ»¸¶¸ÅǼ趴ǼÂÁŸº¼ÆÇŴǼÂÁÁÈÀµ¸ÅÂÁ¿ÌƼºÁ¼è¸ÆÇ»´ÇÇ»¸¢Á·ÈÆÇÅÌ´Á´·´Ǹ¶»Á¼¶´¿Æø¶¼è¶´Ç¼ÂÁÆʸŸÀ¸ÇThe Ringer Equivalence Number (REN) for this terminal equipment is 1.0. The REN indicates the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the ÆÈÀ¹Ç»¸«§Æ¹´¿¿Ç»¸·¸É¼¶¸ÆÁÂÇ¸Ë¶¸¸·èɸThis product meets the applicable Innovation, Science and Economic Development Canada Ǹ¶»Á¼¶´¿Æø¶¼è¶´Ç¼ÂÁÆ
Appendix145FCC Part 15NOTE: This equipment has been tested This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment Âæ´Á·ÂÁÇ»¸ÈƸÅ¼Æ¸Á¶ÂÈÅ´º¸·ÇÂÇÅÌÇÂ¶ÂÅŸ¶ÇÇ»¸¼ÁǸŹ¸Å¸Á¶¸µÌÂÁ¸ÂÅÀŸ¹Ç»¸following measures:f Reorient or relocate the receiving antenna.f Increase the separation between the equipment and receiver.f ÂÁÁ¸¶ÇÇ»¸¸ÄȼÃÀ¸ÁÇ¼ÁÇÂ´ÁÂÈÇ¿¸ÇÂÁ´¶¼Å¶È¼Ç·¼æ¸Å¸ÁÇ¹ÅÂÀÇ»´ÇÇÂÊ»¼¶»Ç»¸Ÿ¶¸¼É¸Åis connected.f Consult the dealer or an experienced radio/TV technician for help.°«§¢§»´Áº¸ÆÂÅÀ·¼è¶´Ç¼ÂÁÆÇÂÇ»¼Æ¸ÄȼÃÀ¸ÁÇÁÂÇ¸ËßÆÆ¿Ì´ÃÃÅÂɸ·µÌÇ»¸ôÅÇÌresponsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone.To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more. This Class B digital apparatus complies with Canadian requirement:CAN ICES-3 (B)/NMB-3(B)
Appendix146California Energy Commission battery charging testing instructionsThis telephone is set up to comply with the energy-conserving standards right out of the box. These instructions are intended for California Energy Commission (CEC) compliance testing only. When the CEC battery charging testing mode is activated, all telephone functions on the cordless handsets, except battery charging, will be disabled.To activate the CEC battery charging testing mode:1. When the telephone base is in idle mode, press and hold /FIND HS. ì¸Å´µÂÈÇƸ¶ÂÁ·ÆÊ»¸ÁÇ»¸IN USE¿¼º»ÇÆÇ´ÅÇÆë´Æ»¼Áº´Á·Ç»¸ƶŸ¸Á·¼Æÿ´ÌÆDeregister all devices?, release /FIND HS, and then press it again or press MENU/SELECT within two seconds.The process takes up to one minute to complete. When the phone successfully enters the CEC battery charging testing mode, all handsets display To register HS, see manual..When the phone fails to enter this mode, repeat the steps mentioned above.To deactivate the CEC battery charging testing mode:1. Unplug the telephone base power adapter from the power outlet, then plug it back in. The telephone base is powered up as normal.2. Register your handsets back to the telephone base. See page 124 for handset registration instructions.
Appendix147Limited warrantyThe AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to our website at www.telephones.att.comor call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.1. What does this limited warranty cover?The manufacturer of this AT&T branded product warrants to the holder of a valid proof of purchase (“CONSUMER” or “you”) that the product and all accessories provided in the sales package (“PRODUCT”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the PRODUCT operating instructions. This limited warranty extends only to the CONSUMER for products purchased and used in the United States of America and Canada.2. What will be done if the PRODUCT is not free from defects in materials and workmanship during the limited warranty period (“materially defective PRODUCT”)?During the limited warranty period, the manufacturer’s authorized service representative will repair or replace at the manufacturer’s option, without charge, a materially defective PRODUCT. If the manufacturer repairs the PRODUCT, they may use new or refurbished replacement parts. If the manufacturer chooses to replace the PRODUCT, they may replace it with a new or refurbished PRODUCT of the same or similar design. The manufacturer will retain defective parts, modules, or equipment. Repair or replacement of the PRODUCT, at the manufacturer’s option, is your exclusive remedy. The manufacturer will return repaired or replacement products to you in working condition. You should expect the repair or replacement to take approximately 30 days.3. How long is the limited warranty period?The limited warranty period for the PRODUCT extends for ONE (1) YEAR from the date of purchase. If the manufacturer repairs or replaces a materially defective PRODUCT under the terms of this limited warranty, this limited warranty also applies to repaired or replacement PRODUCT for a period of either (a) 90 days from the date the repaired or replacement PRODUCT is shipped to you or (b) the time remaining on the original one-year limited warranty; whichever is longer.4. What is not covered by this limited warranty?This limited warranty does not cover:f PRODUCT that has been subjected to misuse, accident, shipping or other physical damage, ¼ÀÃÅÂøÅ¼ÁÆÇ´¿¿´Ç¼ÂÁ´µÁÂÅÀ´¿ÂøŴǼÂÁÂÅ»´Á·¿¼ÁºÁ¸º¿¸¶Ç¼ÁÈÁ·´Ç¼ÂÁèŸʴǸÅÂÅother liquid intrusion; orf ©«¨®Ç»´Ç»´Æµ¸¸Á·´À´º¸··È¸ÇÂŸô¼Å´¿Ç¸Å´Ç¼ÂÁÂÅÀ·¼è¶´Ç¼ÂÁµÌ´ÁÌÂÁ¸other than an authorized service representative of the manufacturer; orf PRODUCT to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; orf PRODUCT to the extent that the problem is caused by use with non-AT&T accessories; orf PRODUCT whose warranty/quality stickers, PRODUCT serial number plates or electronic serial numbers have been removed, altered or rendered illegible; orf PRODUCT purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to products used for rental purposes); orf PRODUCT returned without valid proof of purchase (see item 6); orf Charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit.
Appendix148Limited warranty5. How do you get warranty service?To obtain warranty service, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.NOTE: Before calling for service, please review the user’s manual; a check of the PRODUCT’s controls and features may save you a service call.Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the PRODUCT(s) to the service location. The manufacturer will return repaired or replaced PRODUCT under this limited warranty to you. Transportation, delivery or handling charges are prepaid. The manufacturer assumes no risk for damage or loss of the PRODUCT in transit. If the PRODUCT failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, the manufacturer will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of products that are not covered by this limited warranty.6. What must you return with the PRODUCT to get warranty service? You must:f Return the entire original package and contents including the PRODUCT to the service ¿Â¶´Ç¼ÂÁ´¿ÂÁºʼǻ´·¸Æ¶Å¼ÃǼÂÁ¹Ç»¸À´¿¹ÈÁ¶Ç¼ÂÁÂÅ·¼ï¶È¿ÇÌ´Á·f Include a “valid proof of purchase” (sales receipt) identifying the PRODUCT purchased (PRODUCT model) and the date of purchase or receipt; andf Provide your name, complete and correct mailing address, and telephone number.7. Other limitationsThis warranty is the complete and exclusive agreement between you and the manufacturer of this AT&T branded PRODUCT. It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for this PRODUCT. The warranty exclusively describes all of the manufacturer’s responsibilities regarding the ©«¨®»¸Å¸´Å¸ÁÂÂÇ»¸Å¸ËßÆÆÊ´ÅÅ´ÁǼ¸Æ§ÂÂÁ¸¼Æ´Èǻ¿͸·ÇÂÀ´¾¸À·¼è¶´Ç¼ÂÁÆÇÂÇ»¼Æ¿¼À¼Ç¸·Ê´ÅÅ´ÁÇÌ´Á·ÌÂÈÆ»ÂÈ¿·ÁÂÇŸ¿ÌÂÁ´ÁÌÆȶ»À·¼è¶´Ç¼ÂÁ¬Ç´Ç¸©ÅÂɼÁ¶¼´¿¥´Êżº»ÇÆ»¼ÆÊ´ÅÅ´ÁÇÌº¼É¸ÆÌÂÈÆø¶¼è¶¿¸º´¿żº»ÇÆ´Á·ÌÂÈÀ´Ì´¿ÆÂhave other rights which vary from state to state or province to province.¥¼À¼Ç´Ç¼ÂÁÆ¢Àÿ¼¸·Ê´ÅÅ´ÁǼ¸Æ¼Á¶¿È·¼ÁºÇ»ÂƸ¹èÇÁ¸ÆÆ¹ÂÅ´ôÅǼ¶È¿´ÅÃÈÅÃÂƸ´Á·À¸Å¶»´ÁÇ´µ¼¿¼ÇÌ´ÁÈÁÊżÇǸÁÊ´ÅÅ´ÁÇÌÇ»´ÇÇ»¸©«¨®¼ÆèÇ¹ÂÅÂÅ·¼Á´ÅÌÈƸ´Å¸¿¼À¼Ç¸·to one year from date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall the manufacturer be liable for any indirect, special, incidental, consequential, or similar ·´À´º¸Æ¼Á¶¿È·¼ÁºµÈÇÁÂÇ¿¼À¼Ç¸·ÇÂ¿ÂÆÇÃÅÂèÇÆÂÅŸɸÁȸ¼Á´µ¼¿¼ÇÌÇÂÈƸÇ»¸©«¨®or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this PRODUCT. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.Please retain your original sales receipt as proof of purchase.
Appendix149¸¶»Á¼¶´¿Æø¶¼è¶´Ç¼ÂÁÆOperation Operating time*Talk time (cordless handset) Up to 10 hoursTalk time (cordless handset speakerphone) Up to 5 hoursStandby Up to 7 days* Operating times vary depending on your actual use and the age of the battery. DECT 6.0 digital technology»¸"ÃÅ·ȶÇÆÂæ¸ÅÈÁÆÈÅôÆƸ·Å´Áº¸øŹÂÅÀ´Á¶¸´Á·ÆÂÈÁ·¶¿´Å¼ÇÌ»¼Æ¼Æ´¶»¼¸É¸·Ç»ÅÂȺ»´ÈÁ¼Äȸ´ÁǸÁÁ´·¸Æ¼ºÁ´Á·´·É´Á¶¸Æ¼ÁÁ¼Ƹè¿Ç¸Å¼ÁºǸ¶»Á¿ºÌÁ¼Á·¸Ã¸Á·¸ÁÇ¿´µÂÅ´ÇÂÅÌ»´Æ¶ÂÁèÅÀ¸·Ç»´Ç"ÃÅ·ȶÇÆøŹÂÅÀÈÃÇÂ !Yµ¸ÇǸÅ¼Árange competitions against similarly equipped phones of the leading competition. Now, calls can be taken in the basement, backyard and garage with exceptional sound quality. Telephone operating rangeThis cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over a certain distance — which can vary with the locations of the telephone base and handset, Ç»¸ʸ´Ç»¸Å´Á·Ç»¸¶ÂÁÆÇÅȶǼÂÁ¹ÌÂÈÅ»ÂÀ¸ÂÅÂﶸ«¸·¸èÁ¼Áº¿ÂÁºÅ´Áº¸¶ÂɸŴº¸´Á·¶¿´Å¼ÇÌThis telephone base comes with an antenna which gives much better clarity and covers a longer range than before.HD audioHD audio improves sound quality by expanding and rebuilding frequencies that are lost with traditional phone calls. There is no additional telephone service requirement to use HD audio.It is designed to work with standard telephone service. Your system will automatically enhance all received sound with HD audio.Simulated full-duplex handset speakerphoneThe simulated full-duplex speakerphones on your handset and telephone base allow both ends of a call to speak and be heard at the same time. Optimal performance is subject to external factors and individual usage.RF frequency band 1921.536MHz - 1928.448MHzChannels 5Telephone base voltage(AC voltage, 60Hz)96Vrms - 130VrmsTelephone base voltage(AC adapter output)6VDC @ 600mAHandset voltage 2.4V 400mAh, 2 x AAA Ni-MHCharger voltage(AC adapter output)6VDC @ 100mA
150AAlert toneshandset 127telephone base 127Allow list 85Announcement 104Answering an incoming call during an intercom call 50Answering calls 39Answering system 104–123Assign a speed dial number 65ÈÇÂÂæ BBattery charging 11Battery installation 10Blind transfer 46Block list 82CCaller ID (CID)add entries to phone directory 73, 74delete entries 72dial entries 72review entries 71Call transfer 51Chain dialing 44–45Charger installation 9Clear voicemail indicationhandset 24telephone base 35Clockhandset 20telephone base 31DDay and timehandset 20telephone base 31Deletea caller ID log entry 72a directory entry 63a speed dial number 67Deregistering handsets 125Dialing from a record in the caller ID history 72from the directory 63Directorydial a number 63edit entries 64name search 62new entries 59Display dial 63DSL 9EElapsed time 39Ending a call 40HHandsethandset locator 48quick reference guide 1–2, 2–3ringer tone 19ringer volume 19screen icons 126speakerphone 41temporary ringer silencing 40voicemail indicator 23HD audio 149IImportant safety information 142–143Intercom 49–51LLast number redial 41LCD language 21, 32reset to English 21, 32, 139Lights 128Limited warranty 147–148Line power mode 13MMaintenance 141Make an outgoing call during PTT 57Memory match 70Messagealert tone 112IndexIndex
Index151Indexcounter display 121playback 117–119NNamesenter into directory 59search 62Number of rings 110OOn-hook dialing (predialing) 39Outgoing announcement 104PPaging tone 48Phonebook 58Power adapter 9Predialing 39Push-to-talk 52–57QQuick reference guide 1–4, 2–5Quiet mode 28RReassign a speed dial number 66Receiving calls 39Recharging 11Redial 41–42Registering handsets 124Remote access 122–123Ringer silencing 40Ring tone optionshandset 19telephone base 30SSafety information 142–143Screen display messages 129–131Smart call blocker 77–108Allow calls 79Block calls 79Calls without numbers 79Screen uncategorized calls 99¬¸Ç¬À´ÅÇ¶´¿¿µ¿Â¶¾¸ÅÂÁÂæ$Uncategorized calls 79Speakerphone 41Speed dialdelete a number 67edit a number 66enter a number 65set voicemail number 23, 34Star name list 88T¸¶»Á¼¶´¿Æø¶¼è¶´Ç¼ÂÁÆ %Telephone basequick reference guide 4–5ringer tone 30screen icons 126voicemail indicator 34Temporary ringer silencing 40Timehandset 20telephone base 31Troubleshooting 132–139UUnwelcome calls 79VVisual message waiting indicatorhandset 23telephone base 34Voice guide 11, 12, 108Voicemail 34, 114quick access 23, 34, 67Voice prompts 115Volume controlhandset 19, 43, 118telephone base 30, 43, 118WWarranty 147–148Welcome calls 79
Use the following wallet card to help you remember commands to control your answering system from any touch-tone telephone.Remote access wallet cardFold here.Cut along dotted line.Action Remote commandPlay all messages............................................1Play new messages .......................................2Delete current message ............................3Delete all old messages .............................33Repeat current message...........................4Listen to previous message ....................44Stop .........................................................................5Help menu ............................................................*5Skip current message ..................................6Record announcement................................*7End remote access call ...............................8 (or hang up)Turn system off or on ..................................0Call your phone number, then enter your two-digit access code (preset to 19).Models: CL84107/CL84207/CL84257/CL84307/CL84357Type: DECT 6.0 corded/cordless telephone/answering system withcaller ID/call waiting© 2017 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China.
© 2017 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. QaltelTM is a trademark of Truecall Group Limited.RBRC and 1-800-8-BATTERY are registered trademarks of the Rechargeable Battery Recycling Corporation.Printed in China. Issue 1.0 AT&T 03/17.www.telephones.att.com

Navigation menu