VTech Telecommunications 80-4282-00 User Manual USER GUIDE

Download:
Mirror Download [FCC.gov]
Document ID	28711
Application ID	K6EGjwjKI2zxN1GMWQmVjg==
Document Description	USER GUIDE
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.78kB (47222 bits)
Date Submitted	1999-03-23 00:00:00
Date Available	1999-04-23 00:00:00
Creation Date	2001-07-02 07:14:50
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-07-02 07:14:50
Document Title	USER GUIDE

VTECH ENGINEERING CANADA LIMITED
TITLE
Electrical Specification
MODEL
SPP-ID970/1,ID975/6,A973/4
SPP-ID970/1,975/6
SPP-A973/4
Electrical Specification
Document ID: CPX94-1L
Note: All rights reserved. No part of this publication may be reproduced or transmitted in any form or by
any means. The only controlled copy of this document is kept in electronic form on the VTECH computer
network. All printed copies are uncontrolled documents and are not updated. This Procedure is the
property of VTECH Engineering Canada Ltd., and shall be returned upon request
Prepared By
Title
Approved By
Title
Guy Pothiboon
Project Manager
Reference: 00F2
Revision: 2.0
This document is proprietary to VTECH ENGINEERING CANADA LTD.
Specifications are preliminary and are subject to change without notice.
Page: 1 of 8
28711
VTECH ENGINEERING CANADA LIMITED
TITLE
Electrical Specification
MODEL
SPP-ID970/1,ID975/6,A973/4
Revision History
Revision No
1.0
2.0
Description
Page
First Release
• Changed Model numbers to reflect
the Official Product Numbers from
SONY
• Changed DC Electrical
Characteristics
• Base Standby Time Max TBD to
Min 7
•
Base Continuous Talk Time Max
TBD to Min 7
• Changed Audio Specification
• Receive Volume to provide
typical rating of 12 instead of
Minimum rating of 12
• Changed RF Parameters
• Image Rejection from 60 to 55
• Receiver Muting –107 to –106
• Added RF parameters
• Channel Spacing
• Radiated Field Strength
• Receive Frequency
• Transmit Frequency Stability
• Sensitivity
rd
• 3 Order Intercept Point
• Adjacent Channel Rejection
• Aggregate Data Rate
Reference: 00F2
All
Title Page
and Headers
Effective Date
Jan 25,’99
Feb 19,’99
Revision: 2.0
This document is proprietary to VTECH ENGINEERING CANADA LTD.
Specifications are preliminary and are subject to change without notice.
Page: 2 of 8
28711
VTECH ENGINEERING CANADA LIMITED
TITLE
Electrical Specification
MODEL
SPP-ID970/1,ID975/6,A973/4
Reference: 00F2
Revision: 2.0
This document is proprietary to VTECH ENGINEERING CANADA LTD.
Specifications are preliminary and are subject to change without notice.
Page: 3 of 8
28711
VTECH ENGINEERING CANADA LIMITED
TITLE
Electrical Specification
MODEL
SPP-ID970/1,ID975/6,A973/4
Electrical Specifications
1.1 Operating Conditions
Parameter
Operating Temperature Range
Base Unit Operating Voltage (AC Voltage, 60Hz)
Base Unit Operating Voltage (AC Adapter Output)
Handset Operating Voltage
Notes:
1.
Typical value represents the nominal testing value
2.
NiCd Battery should not be operated above 40 °C.
3.
Handset operates from a 3-cell NiCd Battery.
Min
96
3.2
Typ
25
120
1,3
3.6
Max
40
144
4.2
Units
°C
Vrms
Vdc
Vdc
1.2 DC Electrical Characteristics
Specifications marked with * are guaranteed at the nominal testing temperature and voltage on all units
with the use of automated production test equipment (ATE)
Parameter
Low Battery Detection Threshold (HS)
Handset Standby Time
Handset Continuous Talk Time
Base Unit Standby Time – POTS Mode
Base Unit Continuous Talk Time – POTS Mode
Fast Charge – Handset Battery
Slow Charge – Handset Battery
Spare Battery Charge
Min
Typ
3.5
Max
TBD
TBD
120
60
30
Units
Vdc
Days
Hours
Hours
Hours
mA
mA
mA
1.3 Audio Specification
Specifications marked with * are guaranteed at the nominal testing temperature and voltage on all units
with the use of automated production test equipment (ATE).
Parameter
Min
Typ
Max
Transmit Objective Loudness Rating (TOLR)
-40
-46
-53
1,2
Receive Objective Loudness Rating (ROLR)
51
+46
41
Sidetone Objective Loudness Rating (SOLR)
+3
+8
+19
Receive volume adjustment range
12
TBD
TBD
Transmit Direction Acoustic Overload (into microphone)
105
Receive Direction Acoustic Overload (from receiver)
105
Transmit Direction Noise
20
2,5
Receive Direction Noise
40
Peak Acoustic Pressure
130
Notes:
1. Tested using 0kft of simulated telephone line
2. Tested at normal (low) volume level
3. Base unit connected to 0kft of simulated telephone line terminated with 900Ω
4. Acoustic level that results in 5% THD, measured at 1kHz through a 5kHz lowpass filter
Reference: 00F2
Revision: 2.0
This document is proprietary to VTECH ENGINEERING CANADA LTD.
Specifications are preliminary and are subject to change without notice.
Units
dB
dB
dB
dB
dBspl
dBspl
dBrnC
dB(A)
dBspl
Page: 4 of 8
28711
VTECH ENGINEERING CANADA LIMITED
TITLE
Electrical Specification
MODEL
SPP-ID970/1,ID975/6,A973/4
5. Handset isolated from sound input and mechanical disturbances
6. Tested at high volume level
1.4 Telephone Line Interface Specification
Specifications marked with * are guaranteed at the nominal testing temperature and voltage on all units
with the use of automated production test equipment (ATE).
Parameter
DTMF Frequency Tolerance
DTMF Low Group Tone Level
DTMF High Group Tone Level
DTMF Combined Tone Level
DTMF High Group Pre-emphasis (Twist)
Pulse Dialing Break Duration
Pulse Dialing Make Duration
Pulse Dialing Rate
2,3
Ring Detection Frequency
Ring Response Voltage
Ring No-Response Voltage
Min
-1.5
-7.5
-5.5
Typ
-5.0
-3.0
2.0
60
40
10
15
40
Max
+1.5
-4.0
-2.0
+2.0
4.0
68
25
Units
dBm
dBm
dBm
dB
ms
ms
pps
Hz
Vrms
Vrms
Notes:
The above specification are derived from the TIA/EIA-470-B publication
1. Measured across a 900Ω terminating impedance
2. The ringer must ring with signals within this range
3. Measured with a frequency of 20Hz
4. The ringer must not ring with signals within this range
Reference: 00F2
Revision: 2.0
This document is proprietary to VTECH ENGINEERING CANADA LTD.
Specifications are preliminary and are subject to change without notice.
Page: 5 of 8
28711
VTECH ENGINEERING CANADA LIMITED
TITLE
Electrical Specification
MODEL
SPP-ID970/1,ID975/6,A973/4
1.5 Calling Line Identification Specification
Parameter
Receive Space Frequency
Receive Mark Frequency
Receive Baud Rate
Mark FSK Detector Sensitivity
Space FSK Detector Sensitivity
FSK Detector Twist
CAS Detection Sensitivity
Channel Seizure Delays
Immunity to Stuffed Mark Bits
CAS
Frequency limits
Lower Tone
Upper Tone
Dynamic Range (per tone)
Twist
Tone Duration
ACK
Signal Duration
Min
2178
1188
1188
-32
-36
-10
-32
300
360
Units
Hz
Hz
Baud
dBm
dBm
dB
dBm
Bits
Bits
75
2236.5
2887.5
-14
<6
85
Hz
Hz
dBm
dB
mS
55
65
mS
2023.5
2612.5
-32
Typ
2200
1200
1200
2130
2130
Max
2222
1212
1212
-12
-32
+10
Notes: The above specification have been derived from the following Bellcore standards
• Bellcore TR-NWT-000030 Issue 2
"Voiceband Data Transmission Interface Generic Requirements"
•
•
Bellcore TR-NWT-000031 Issue 4
"CLASS Feature: Calling Number Delivery"
Bellcore TR-NWT-001188 Issue 1
"CLASS Feature: Calling Name Delivery Generic Requirements"
Reference: 00F2
Revision: 2.0
This document is proprietary to VTECH ENGINEERING CANADA LTD.
Specifications are preliminary and are subject to change without notice.
Page: 6 of 8
28711
VTECH ENGINEERING CANADA LIMITED
TITLE
Electrical Specification
MODEL
SPP-ID970/1,ID975/6,A973/4
1.6 Radio Specification
Number of RF Channels
Handset Transmission Frequency Range
Base Transmission Frequency Range
Channel Spacing
Image Rejection (RF)
Receiver Muting Level
RF Radiated Field Strength
Receive Frequency
Transmit Frequency Stability
Sensitivity for 1/1000 bit errors
rd
3 Order Intercept Point
Adjacent Channel Rejection
Aggregate Data Rate
30
923.1 – 927.75 MHz
902.3 –906.65 MHz
300 KHz
> 55 dB
Between -109 dBm and -106 dBm
< 94 dBuV/m @ 3 meters
10.7 MHz
+/-10 KHz, 0 to 50c
Less than or equal to -105 dBm @
antenna
> 55 dB
> 50 dB
48 Kbps
Note: For spurious rejection measurements, RF level of the desired signal is set to provide 25dB SINAD (CCITT). The
rejection is the relative level of the interference signal above the desired to reduce the SINAD to 20dB (CCITT)
Reference: 00F2
Revision: 2.0
This document is proprietary to VTECH ENGINEERING CANADA LTD.
Specifications are preliminary and are subject to change without notice.
Page: 7 of 8
28711
VTECH ENGINEERING CANADA LIMITED
TITLE
Electrical Specification
MODEL
SPP-ID970/1,ID975/6,A973/4
1.7 Regulatory Specifications
•
The circuit must meet the radio frequency emission requirements defined in FCC regulations Part 15
and IC RSS-210.
•
The circuit must meet telephone interface requirements defined in FCC part 68 and IC CS-03
standards.
Reference: 00F2
Revision: 2.0
This document is proprietary to VTECH ENGINEERING CANADA LTD.
Specifications are preliminary and are subject to change without notice.
Page: 8 of 8
28711

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:07:02 07:14:50
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:07:02 07:14:50+01:00
Page Count                      : 8

EXIF Metadata provided by EXIF.tools