VTech Telecommunications 80-4282-00 Cordless Telephone User Manual USERS GUIDE

VTech Telecommunications Ltd Cordless Telephone USERS GUIDE

UserManual.wiki >

VTech Telecommunications >

80-4282-00 User Manual >

Contents

1. USER GUIDE
2. USERS GUIDE

USERS GUIDE

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 1 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeInternal Product Specification for thePDLci MK3900 MHz Single-Line Digital Cordless Telephonewith Caller ID, Base Speakerphone & TADRevision History:Revision Description Page EffectiveDateA Draft Release All Apr 16/99B Incorporate Comments All May 14/990 Initial Release All June 8/99All rights reserved. No part of this document may be reproduced, loaned, or transmitted in any form or byany means without authorization in accordance with VTECH policies and administrative procedures. Thisdocument remains the property of VTECH Engineering Canada Ltd., and must be returned upon request.Prepared By Maria Liao Approved By Gary RogalskiTitle Project Manager Title Engineering Manager

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 2 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeContents1 Overview.......................................................................................................................... 61.1 General Description...................................................................................................... 61.2 Regulatory Standards................................................................................................... 61.3 Preliminary Feature List................................................................................................ 71.4 Cosmetic Styling......................................................................................................... 121.4.1 Base Unit Line Drawing ...........................................................................................................131.4.2 Handset Line Drawing .............................................................................................................142 Functional Layouts ....................................................................................................... 152.1 Handset Functional Layout......................................................................................... 152.1.1 Handset LED Indicators...........................................................................................................152.1.2 Handset Key Descriptions .......................................................................................................152.1.3 Liquid Crystal Display ..............................................................................................................172.1.4 Keypad and LCD Illumination ..................................................................................................172.1.5 Headset Jack...........................................................................................................................172.2 Base Unit Functional Layout....................................................................................... 182.2.1 Base Unit LED Indicators.........................................................................................................182.2.2 Base Unit Key Descriptions .....................................................................................................192.2.3 Seven-Segment LED Display ..................................................................................................203 User Interface Specification......................................................................................... 213.1 IDLE Mode ................................................................................................................. 213.2 Dialling ....................................................................................................................... 223.2.1 Live Dialling..............................................................................................................................223.2.2 Redial.......................................................................................................................................223.2.3 Directory Dialling (Handset).....................................................................................................233.2.4 Dialling with Special Purpose Keys (Option) ...........................................................................233.2.5 Tone/Pulse Dialling..................................................................................................................243.3 TALK Mode ................................................................................................................ 243.3.1 Caller ID with Call Waiting (CIDCW) .......................................................................................243.3.2 Flash........................................................................................................................................243.3.3 Call Termination.......................................................................................................................253.3.4 Three-Way Conference ...........................................................................................................253.4 Incoming Call ............................................................................................................. 263.4.1 Normal Ringing ........................................................................................................................263.4.2 Ringing with Caller ID Data......................................................................................................263.4.3 Memory Match Ringing............................................................................................................273.4.4 Answer Call..............................................................................................................................273.5 Hold............................................................................................................................283.5.1 Place Call on Hold ...................................................................................................................283.5.2 Release Hold ...........................................................................................................................283.5.3 Automatic Hold Release ..........................................................................................................293.5.4 CIDCW during Hold.................................................................................................................29

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 3 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice3.6 Intercom ..................................................................................................................... 293.6.1 Page to Initiate Intercom..........................................................................................................293.6.2 Paging during a Call.................................................................................................................303.6.3 Ring Detection during Intercom ...............................................................................................313.6.4 Transfer Call via Intercom .......................................................................................................313.6.5 CIDCW during Paging with Line on Hold.................................................................................323.6.6 CIDCW during Intercom with Line on Hold..............................................................................333.7 Caller ID Functions..................................................................................................... 333.7.1 Review Caller ID Records........................................................................................................343.7.2 Call Back..................................................................................................................................353.7.3 Program Caller ID Data into Directory.....................................................................................353.7.4 Delete Caller ID Data...............................................................................................................373.8 PROGRAM Mode....................................................................................................... 383.8.1 Program Handset Directory .....................................................................................................393.8.2 Program One-Touch Memory Dialling Keys (Option) ..............................................................413.8.3 Program Home Area Code......................................................................................................413.8.4 Program Additional Area Codes ..............................................................................................423.8.5 Configure Handset Ringer Setting...........................................................................................433.8.6 Configure VMWI Setting ..........................................................................................................453.9 Memory Review and Modification............................................................................... 453.9.1 Handset Directory....................................................................................................................463.9.2 Handset Memory Key Entries (Option)....................................................................................493.9.3 Redial.......................................................................................................................................493.10 Voice Announce (Option) ........................................................................................... 503.10.1 Add Announcement .............................................................................................................513.10.2 Review Announcements......................................................................................................513.10.3 Modify Announcements .......................................................................................................523.10.4 Program Announcement Settings........................................................................................533.11 Special Features ........................................................................................................ 543.11.1 Call Timer ............................................................................................................................543.11.2 Easy-Answer........................................................................................................................543.11.3 Handset On-Cradle / Off-Cradle ..........................................................................................543.11.4 Key Beep .............................................................................................................................553.11.5 Line In Use Indication ..........................................................................................................553.11.6 Visual Message Waiting Indication (VMWI) ........................................................................553.11.7 Handset Speakerphone (Option).........................................................................................553.11.8 No Telephone Line Connected............................................................................................563.12 User Indication and Priority ........................................................................................ 563.12.1 Status Tones........................................................................................................................563.12.2 LCD Messages ....................................................................................................................573.12.3 LEDs....................................................................................................................................584 ITAD Operation.............................................................................................................. 604.1 ITAD Local Operation................................................................................................. 604.1.1 Activating the Answering Machine...........................................................................................614.1.2 Answering Incoming Calls .......................................................................................................614.1.3 Privacy Screening (Option)......................................................................................................62

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 4 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice4.1.4 Recording Incoming Messages ...............................................................................................634.1.5 Call-Screening .........................................................................................................................634.1.6 Recording Memos....................................................................................................................644.1.7 Reviewing Messages / Memos................................................................................................644.1.8 Deleting Messages ..................................................................................................................654.1.9 Special Features......................................................................................................................664.1.10 Configuring the ITAD ...........................................................................................................674.2 Remote Operation of ITAD........................................................................................ 724.2.1 Accessing Remote Operation..................................................................................................734.2.2 Voice Menu for Remote Control ..............................................................................................734.2.3 Activating the Answering Machine...........................................................................................744.2.4 Recording Memos....................................................................................................................754.2.5 Reviewing Messages...............................................................................................................754.2.6 Deleting Messages ..................................................................................................................774.2.7 Modifying & Confirming Greetings...........................................................................................774.3 User Indication and Priority ........................................................................................ 774.3.1 Seven-Segment LED Display ..................................................................................................774.3.2 Audible Status Indication .........................................................................................................784.3.3 Status Tones............................................................................................................................784.3.4 LEDs........................................................................................................................................795 RF Link Operation......................................................................................................... 805.1 RF Link Data .............................................................................................................. 805.2 Security Code............................................................................................................. 805.3 RF Channel Selection................................................................................................. 805.4 Handset Out of Range Detection................................................................................ 815.5 Link Recovery............................................................................................................. 816 Power Management ...................................................................................................... 826.1 Battery........................................................................................................................ 826.2 Low Battery Indication ................................................................................................ 826.3 Spare Battery Charger ............................................................................................... 826.4 POTS Mode Operation............................................................................................... 826.5 Power Interruption...................................................................................................... 837 Electrical Specifications............................................................................................... 847.1 Operating Conditions.................................................................................................. 847.2 DC Electrical Characteristics ...................................................................................... 847.3 Audio Specifications ................................................................................................... 857.4 Telephone Line Interface Specifications..................................................................... 857.5 Calling Line Identification Specifications..................................................................... 867.6 Radio Specifications................................................................................................... 867.7 Frequency Allocation Tables ...................................................................................... 877.7.1 Base Unit Frequencies ............................................................................................................877.7.2 Handset Frequencies...............................................................................................................887.8 Safety Specifications.................................................................................................. 89

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 5 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice7.9 Factory Settings (Product Level) ................................................................................ 898 Detailed Electrical Specifications................................................................................ 918.1 Chassis Temperature................................................................................................. 918.2 Detailed DC Electrical Characteristics ........................................................................ 918.3 Detailed Audio Specifications ..................................................................................... 928.4 Detailed Telephone Line Interface Specifications....................................................... 928.5 Detailed Radio Specifications..................................................................................... 928.6 Product Reliability....................................................................................................... 938.7 EEPROM Parameter Settings .................................................................................... 93

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 6 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice1 OverviewThis specification defines the functional and electrical performance requirements of the PDLci MK3 900MHz digitalcordless telephone. The PDLci MK3 is intended to be compatible with most type of central office equipment in usein Canada, the United States and South America.1.1 General DescriptionThe PDLci MK3 is a digital cordless telephone. It is based on the design of the latest generation of the VTECH ThePDLci MK3 is part of the VTECH‘s latest generation of 900 MHz digital cordless telephones. The current generationof 900 MHz digital cordless telephone product is based on the VTECH PDL MK2 design. The new digital productswill be designed using the AM79C493 ASIC which is the third generation of the ‘49x series from AMD. This ASIChas been optimised for functionality and cost.The design of the VTECH PDLci MK3 is based on the Sony CPX-953 model of single-line digital cordless telephone.The major changes required include the incorporation of a newly designed ADPCM TAD, a new mechanical chassis,speakerphone in the base, support for both contact and inductive charging of handset battery, and other optionalfeatures such as handset speakerphone, voice announce, call-waiting deluxe, and special purpose dialling (e.g. pay-per-use) keys.1.2 Regulatory StandardsAs a requirement for sale in the United States, the PDLci MK3 will comply with the electrical specifications definedin the following documents:• FCC Part 15 Radio Emissions Requirements• FCC Part 68 Telephone Line Interface Requirements• UL 1459 Safety RequirementsAs a requirement for sale in Canada, the PDLci MK3 will comply with the electrical specifications defined in thefollowing documents:• IC RSS-210 Radio Emissions Requirements• IC CS-03 Telephone Line Interface Requirements• CSA 225 Safety RequirementsIn addition to the above mandatory regulations, the recommendations provided in EIA 470-B, TIA 571, TIA 631 andIEC 801-2 will be used as a guideline.The caller ID features will meet the protocol requirements specified in the following Bellcore documents:• TR-NWT-001401 Issue 1 Visual Message Waiting Indicator• TR-NWT-000030 Issue 2 Voiceband Data Transmission Interface Generic Requirements• TR-NWT-000031 Issue 4 CLASS Feature: Calling Number Delivery• TR-NWT-001188 Issue 1 CLASS Feature: Calling Name Delivery Generic RequirementsThe caller waiting deluxe features will meet the protocol requirements specified in the following Bellcore document:• GR-416-CORE Issue 1 CLASS Feature: Call Waiting Deluxe

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 7 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice1.3 Preliminary Feature ListThe PDLci MK3 will offer many of the same features as the Sony CPX-953, with only a few unique features to thisphone. In addition to the standard features, the PDLci MK3 also offers a number of optional features that may beavailable on selected models. In the subsequent sections of this document, description related to these optionalfeatures will be identified in italics.DESCRIPTION STANDARD FEATURE OPTIONAL FEATURESystem General900 MHz digital (ADPCM) Y# channels 30Channel selection autoDTMF dialing Y# security codes 16.8MDigital scramble voice Y# lines 1Battery specification 3.6V, 600mAhHandsetMechanical /CosmeticRetractable antenna YFixed antenna NBacklit keypad YBacklit LCD YReversible handset charging at desktop YReversible handset charging at wall mount YVolume switch N2.5mm headset jack YHandset speakerphone N YBelt clip YFeaturesAny key answer (except OFF) N# ringer types 4Ringer off Y# speed dial entries 50# digits in speed dial entry 32Auto hang-up when handset returned to cradle YExtension-in -use indication Y# ringer volume controls 3# ear-piece volume controls 4Out-of-range indicator (LCD display/LED) LCDMemory match ringing YTelephone cord connection check YBase AC power check YMulti-handset NMessage waiting indication(LCD display/LED) LCD

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 8 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeDESCRIPTION STANDARD FEATURE OPTIONAL FEATUREBattery low indication(LCD display/LED) LCD# redial 1Battery standby time >7 daysBattery talking time >7 hoursLine hold YMic muting YLine flash (ms) 650 msCaller ID (type) Type II Type 2.5Handset intercom with base YPause dialing YHandset privacy from interruption NHandset conference mode NArea code preset YSpeakerphone N YCID voice announce N YPay-per-use N YOne-touch memory dialling N YKeysNumerical keys 12CHANNEL NHOLD N /MUTEMUTE Y /HOLDPHONE ON /FLASHOFF YFLASH /PHONEPROGRAM YMEMORY NCID NREDIAL /PAUSECANCEL/DELETE NINTERCOM YPAUSE /REDIALLINE 1 NLINE 2 NPRV NCONF NPPU keys N 3QUICKMEM keys N 2Receiver Volume (up & down) YSPEAKERPHONE N YSELECT YBACK (<) YFORWARD (>) YLEDs

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 9 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeDESCRIPTION STANDARD FEATURE OPTIONAL FEATURESpeakerphone N backlitLine 1Line 2Base UnitMechanical /CosmeticBacklit keypad NBacklit LCD NAllow reversible handset charging at desktop YAllow reversible handset charging at wall mount YSpare battery charger YTone/pause switch YRinger volume switch YFeaturesAny key answer(except OFF) N# ringer types 1# speed dial entries 10Extension-in-use indication N# ringer volume controls 3# speaker volume control 8Ringer on/off YMemory match ringing YSpeakerphone YWall mountable YPage/handset locator YIntercom YMessaging waiting indication (LCD display/LED) LEDConferencing NPrivacy from interruption NAC power failure back-up with spare battery YStandby time with spare batteryTalking Time with spare battery# redial 0Tone/pulse dialing YLine hold YMic muting YLine Flash (ms) 650 msCID (type) – incoming call only NHandset intercom with base YPause dialing NCID voice announce N YPay-per-use NKeysNumerical keys 0HOLD with LED

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 10 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeDESCRIPTION STANDARD FEATURE OPTIONAL FEATUREMUTE with LEDFLASH YPROGRAM NMEMORY NCID NREDIAL NCANCEL/DELETE NINTERCOM with LEDPAUSE YLINE 1 NLINE 2 NOFF NPAGE NSPK PHONE (on/off) with LEDCONF NPRV NSpeaker Volume (up & down) YPPU keys 0LEDsSpare battery redCharge redIn use redNew call N redMessage redCIDFeaturesCID type II 2.5# CID storage 50Repeat indication/counter counterLCD display matrix 2*16# characters 15# digits for call-back 11Private CID display YTransmission CID display YUnavailable CID display YNew call display YDisplay CID tel # YDisplay CID name YDisplay CID time YDelete CID data YSave CID to speed dial entry YKeysADDITION DISPLAY NERASE/DELETE N

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 11 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeDESCRIPTION STANDARD FEATURE OPTIONAL FEATUREFORWARD NBACKWARD NTIME/DATE NITADFeaturesRecording time 17# incoming messages 99# mail boxes 3 4Private mail box NOGM recording YLine selection for OGM NVoice menu & operating guide YDay and time setting YRinger setting 2,4,6, toll saverCall screening YFactory pre-set security code YProgrammable YAudio messaging alert Y2-way conferencing recording YAnnounce-only YRemote ITAD operation YNew message display YPrivacy screening N YKeysANSWERING MACHINE ON/OFF with LEDMAILBOX 1 with LEDMAILBOX 2 with LEDMAILBOX 3 with LEDMAILBOX 4 N with LEDPLAY/STOP NPAUSE NSKIP /FASTREPEAT /SLOWFAST /SKIPSLOW /REPEATRECORD /MEMOERASE YMEMO /RECORDTIME /SETMENU YSELECT YSET /TIMEMessage Waiting (VMWI)FSK detection Y

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 12 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeDESCRIPTION STANDARD FEATURE OPTIONAL FEATUREStutter dial detection N Y1.4 Cosmetic StylingLine drawings for the PDLci MK3 base unit and handset are in the following sections.

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 13 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice1.4.1 Base Unit Line Drawing

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 14 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice1.4.2 Handset Line Drawing

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 15 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice2 Functional Layouts2.1 Handset Functional Layout2 abc 3 def5 jkl4 ghi 6 mno8 tuv0 oper #PGMHOLD/MUTE INT.COM1tone*FLASH9 wzyz7 pqrsREDIAL/PAUSEPHONE SPKR OFFSELECTFigure 1 - Handset Keypad Layout2.1.1 Handset LED IndicatorsSpeakerphone LED - this LED illuminates steadily as backlighting for the <SPKR> key when thehandset is activated.2.1.2 Handset Key Descriptions<◄ > and < ►> keys - these keys are generally used for menu navigation or scrolling memory data.The <◄ > key moves to the left or previous selection while the < ►> key moves to the right ornext selection. (On some models, <◄ > may be designated as <▼> and < ►> may be designatedas <▲>.) All menu selection or data review will wrap around when scrolled continuously. Duringinput/data editing, <◄ > will erase the character at the cursor while < ►> will move the cursor tothe next position. In the IDLE mode, pressing these keys will access the caller ID log.<SELECT> key - this key is generally used during menu navigation or reviewing memory data to enterthe current menu selection or select the displayed memory record for operation. In the IDLEmode, pressing this key will access the handset directory.<PHONE> key - this key is used to enter the TALK mode. If the handset is already in the TALKmode, pressing this key will generate a hook-flash on the PSTN line. This key is active in all of thehandset operating modes.

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 16 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice<OFF> key - this key is used to exit all modes of operation and return the phone to the IDLE mode.<PGM> key - this key is used to enter the PROGRAM mode. This key is only active in the IDLEmode; it has no function in the TALK mode.<HOLD/MUTE> key – this key combines the function of hold and mute. The key will function as<MUTE> if pressed and released within one second or as <HOLD> if held longer than one second.<MUTE> is valid during the TALK (or handset SPEAKERPHONE) or INTERCOM mode todisable the microphone in the mouthpiece or handset speakerphone. If the microphone is alreadymuted, pressing the key a second time will cancel the mute. <MUTE> is not available during thehandset HOLD mode.<HOLD> is valid during the TALK (or handset SPEAKERPHONE) mode to place a call on hold.<REDIAL/PAUSE> key – this key is used for last number redial or to insert a pause during dialling.This key will function as <REDIAL> when the handset is off-hook and no other dialling keys havebeen pressed. After the line is connected and one or more dialling digits have been sent, this keywill function as <PAUSE>.<REDIAL> is valid in the TALK (or handset SPEAKERPHONE) or PROGRAM mode. Duringthe TALK (or handset SPEAKERPHONE) mode, <REDIAL> will dial the contents of the redialbuffer. This key is also active in the PROGRAM mode for storing the redial buffer into a directoryentry.<PAUSE> is valid during TALK (or handset SPEAKERPHONE), or PROGRAM mode. In allcases, pressing this key will insert a 2-second pause into the dialling sequence. In the PROGRAMmode, the pause will be stored as a special digit in the phone number of a directory entry.<INT.COM> key - this key is used to initiate an intercom with the base speakerphone. The handset mayinitiate by first paging the base, or respond to a page from the base. In either case, the phone willenter the INTERCOM mode. This key is active in the IDLE or handset HOLD mode.<TONE/*> key - this key is used to initiate temporary DTMF dialling. This key is only active in theTALK mode, and only if the default dialling method is pulse.Receiver volume keys - these keys are used to adjust the volume of the earpiece receiver or handsetspeakerphone. There are four different levels of volume available. The volume will change only ifthe volume control key is held down for at least one second.<SPKR> key - this key is used to enter the handset SPEAKERPHONE mode. This key is active in theTALK, INTERCOM or SPEAKERPHONE mode only. If the handset is in TALK or INTERCOMmode, pressing this key will activate the handset speakerphone. If the handset is already in theSPEAKERPHONE mode, pressing this key will generate a hook-flash on the PSTN line.Special purpose keys – these keys are used for billed services (pay-per-use functions), call-waitingdeluxe operations, or one-touch memory dialling. In all cases, pressing such a key will enterTALK mode and dial the string that has been configured for the key. For the per-per-use andcall-waiting deluxe keys, the associated dial string will be pre-programmed at the factory. Theone-touch memory dialling keys will be user-configured. The per-per-use keys are valid duringany operating mode; the one-touch memory dialling keys are valid during IDLE, TALK (or

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 17 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticehandset SPEAKERPHONE), HOLD, and INTERCOM modes; the call waiting deluxe keys arevalid during TALK (or handset SPEAKERPHONE), HOLD or INTERCOM modes.2.1.3 Liquid Crystal DisplayThe liquid crystal display (LCD) is a two-row by 16-character alphanumeric type display, with an additional row foricons/status at the bottom. The display will be as follows:2.1.4 Keypad and LCD IlluminationGenerally, the backlight on the keypad and LCD illuminates if the <PHONE> or <PGM> key is pressed when thehandset is not in use, or when any of the DTMF keys or the <PHONE> key is pressed when the phone is off-hook.After a key is pressed, the illumination remains on for ten (10) seconds and then automatically turns off. Pressingany key during or after the ten-second interval restarts the ten-second timer. The backlight will not illuminate whenthe <OFF> key is pressed since user is assumed to have completed the desired phone operation. When the phone isoff-hook, the backlight will also not be activated by the <REDIAL> key.Backlight illumination also occurs during handset ringing for incoming calls. The backlighting follows the cadenceof the ringing signal (i.e., illumination when ring on and no illumination when ring off). After termination of ringing,if the call is not answered, the illumination goes off and remains off until a key is pressed or another call is received.If the call is answered, the illumination remains on for ten seconds (ten-second timer restart as a result of pressing akey) and then turns off automatically provided no other keys are pressed.Backlight illumination turns off immediately after handset is placed on cradle.2.1.5 Headset JackThe handset is equipped with a jack that is capable of mating with a 2.5 mm plug headset (optional headsetpurchased separately). When the headset is plugged in, the earpiece receiver and handset microphone aredisconnected and redirected to the headset earpiece and microphone. The audio will be reconnected back to thehandset ear- and mouthpiece when the headset is unplugged from the jack.ABCDEFGHIJKLMNOQ1234567890123456NEWOLDAMPM8818.8818 88

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 18 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice2.2 Base Unit Functional LayoutVOLUMECHARGINGMUTESPAREBATTERY IN USE NEW CALL DELETEINTERCOM/PAGE SPEAKERPHONETIME/SET SELECT MENUANSWER ON/OFFmemo231REPEAT SKIPMAIL BOXPLAY/STOPHOLDFLASHFigure 2 - Base Unit Layout2.2.1 Base Unit LED IndicatorsCharging LED - this LED illuminates steadily when the handset is resting in the base unit cradle andthe handset battery is being charged.Spare Battery LED - this LED illuminates steadily when the handset is resting in the base unit cradleand the handset battery is being charged. It will blink slowly when the phone is operating in POTSmode.In Use LED - this LED illuminates steadily when the handset is in the TALK (or handsetSPEAKERPHONE) mode. It will blink quickly during an incoming ring. It will blink slowlywhen a call is on hold during the handset HOLD mode.Mute LED - this LED illuminates steadily when the base speaker is muted.Speakerphone LED - this LED illuminates steadily when the base is in the SPEAKERPHONE mode.It will blink slowly when a call is on hold during the base HOLD mode.

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 19 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeIntercom/Page LED - this LED illuminates steadily when the base is in INTERCOM mode. It willblink slowly during a page when intercom is initiated.Mailbox LEDs – these LEDs illuminates steadily when there are old messages in the correspondingmailboxes. They will blink slowly if there are new messages.New Call LED - this LED illuminates steadily when there are new calls in the handset caller ID log.Message LED - this LED blinks when there is voice mail waiting from the CO.Hold LED - this LED illuminates steadily when a call is placed on hold from the base unit.2.2.2 Base Unit Key Descriptions<SPKR> key - this key is used to enter the base SPEAKERPHONE mode. If the base speakerphone isalready engaged, pressing this key a second time will return the phone to the IDLE mode. Thiskey is active in all of the base operating modes.<INT.COM> key - this key is used to initiate an intercom with the handset. If the base is already in theINTERCOM mode, pressing this key a second time will terminate the intercom.<FLASH> key - this key is used to generate a hook flash on the PSTN line during the baseSPEAKERPHONE mode. It can be used to insert a hook flash into a speed dial entry during thebase PROGRAM mode. This key is not valid in any other modes.<MUTE> key – this key is used to disable the base microphone during the base SPEAKERPHONE orINTERCOM mode. If the microphone is already muted, pressing the key a second time will cancelthe mute. <MUTE> is not available during the base HOLD mode.<HOLD> key - this key is used to place a call on hold during the base SPEAKERPHONE mode.<MENU> key - this key is used to program various answering machine features.<TIME/SET> key - this key is used to announce the current time or to confirm the selected item orreview the current settings.<SELECT> key - this key is used to select different options in the menu setting mode.<MEMO> key - this key is used to record an outgoing message or a memo.<ERASE> key - this key is used to delete individual or all the messages in a mailbox.<ANSWER ON/OFF> key - this key is used to enable or disable the answering machine to answerincoming calls.<SKIP/QUICK> key - this key is used to skip forward a message during playback of messages in amailbox, or to increase the playback speed during message review.<REPEAT/SLOW> key - this key is used to repeat or playback the previous message in a mailbox, or todecrease the playback speed during message review.Mailbox keys – these keys are used for to initiate and stop playback of incoming messages in thecorresponding mailboxes.

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 20 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeSpeaker volume keys – these keys are used to adjust the volume of the base speaker. There are eightdifferent levels of volume available. If the up/down adjustment keys are held down, the volumewill be increased/decreased continuously through the eight levels at a rate of four levels/second.Ringer switch – this switch, located on the side of the base unit, is used to set the base ringer volume(high, low or off).Tone/Pulse switch - this switch, located on the side of the base unit, is used to set the default methodof dialling to either PULSE or DTMF. The Tone/Pulse switch is read when the phone goes off-hook; it cannot be used to change the dialling method once a call is in progress.2.2.3 Seven-Segment LED DisplayA two-digit display on the base unit provides visual indication of the ITAD operation. Each digit utilises a seven-segment red LED display as follows:8

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 21 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice3 User Interface SpecificationThis section provides the details of the PDLci MK3 user interface and includes a description of all the operatingmodes of the phone. The operation of the ITAD is described separately in Section 4. The main operating modes ofthe phone are:• IDLE• TALK / handset SPEAKERPHONE / base SPEAKERPHONE• RINGING• handset HOLD / base HOLD• INTERCOM• handset PROGRAM / base PROGRAM• MEMORY REVIEWThese operating modes can be triggered by the following events:• Keys pressed on the handset• Keys pressed on the base• Receiving an incoming call from the PSTN• Replacing the handset onto the base cradle• Removing the handset from the base cradle• A timeout (where appropriate)For this section, the following are to be noted:• A <Digit> key can be any of the <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, <9>, and <0> keys• A <Dial> key can be a <Digit> key, the <*> key, or the <#> key• When more than one function is mapped to the same key, the details of the condition to invoke thedifferent functions are described in Sections 2.1.2and 2.2.2. The user interface description is thissection references the keys as if they are independent.• When navigating the menu on the LCD, the selected menu item is highlighted by blinking the entry onthe display. However, the selected item is shown in BOLD in the user interface description below.3.1 IDLE ModeThe phone is in the IDLE mode when it is not in use by the user and there is no incoming signal from the telephoneline. In this state, the phone is on-hook and the handset operates in power conservation mode. The handset isgenerally asleep with its transmitter and receiver turned off. It will wake up periodically and power up the receiverbriefly to check for transmission from the base.The phone can go from any of its operating mode to the IDLE mode. When the <OFF> key is pressed or the handsetis placed on the base unit cradle, the phone will exit its current operating mode and go back to the IDLE modewithout sending an error beep.

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 22 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice3.2 DiallingThere are two basic ways that a number can dialled out from the phone – dialling digits as they are entered on thekeypad (live dialling), or dialling a string that has been stored in memory. In the latter case, the string may be anentry in the handset directory or base speed dial list, contents of the redial buffer (handset or base), or a caller IDrecord (handset only).During dialling, the LCD will display a “dial monitor” to indicate the dialling in progress. Starting with the first digitdialled, subsequent digits will be appended to the dial string displayed as they are dialled. The dial monitor will bedisplayed for ten seconds after each <Dial> key pressed. After ten seconds , the dial monitor will be and replaced bythe call timer on the display.Pressing <OFF> during handset dialling or <SPKR> during base dialling will return the phone to the IDLE mode.3.2.1 Live DiallingTo initiate live dialling, press either the <PHONE> on the handset or <SPKR> on the base to seize the line. Thedigits to be dialled will be sent 800 ms after the line has been seized or when the first digit is pressed, whicheveroccurs later.Besides the <Dial> keys, <FLASH>, <PAUSE> are also valid for dialling. The dial data will be stored in theappropriate redial buffer (depending where the dialling is initiated).3.2.2 RedialThe <REDIAL> key will redial the last phone number dialled when the key is pressed immediately after the phone isoff-hook. After any other keys have been dialled, <REDIAL> will no longer be valid. If the redial buffer is empty,the dialling unit will go back to the TALK with an error beep.The base and handset will each have its own independent redial buffer. The redial buffer can hold up to 32 dialleddigits. When the dialled string exceeds 32 digits, all existing data will be deleted and the redial buffer will becomeempty.TALK 2<3>TALK 2735131TALK 0:00’45. . .TALK 0:00’00<7><2>10-second delayTALK 273TALK 27<1><5><PHONE>+ Base In Use LED on

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 23 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice3.2.3 Directory Dialling (Handset)To dial from the handset directory, the phone must be in the MEMORY REVIEW mode to select the appropriatedirectory entry. When <SELECT> is pressed during the directory menu display to initiate the dialling, the phone willautomatically seize the line and start sending the pre-configured dial string after a 2-second delay.3.2.4 Dialling with Special Purpose Keys (Option)Some models may be equipped with special purpose keys on the handset that are used for dialling pre-configuredsequence of digits. These keys can be used for one of the following:• accessing billed services (PPU)• initiating call waiting deluxe (CWD) operations in response to CID during call waiting• one-touch memory dialling (QuickMEM)The pay-per-use (PPU) and call waiting deluxe keys are factory configured while the one-touch memory diallingkeys are user-configured.TALK 12-second delay+ Base In Use LED onTALK 0:00’00TALK 12123456789TALK 0:00’25. . . diallingVTECH ELECTRONC273-5131 DIAL EDIT ERASE273-5131<SELECT><SELECT>10-second delayTALK 2TALK 0:00’15...TALK 0:00’00<REDIAL>TALK 273<PHONE>dialling

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 24 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeWhen a <PPU> or <QuickMEM> key is pressed, the phone will go into the TALK mode and dial the digit stringassociated with the key. A dial monitor will be displayed to show the dialling sequence. If the phone has been inthe INTERCOM mode, the intercom will first be terminated (with a key beep sounding at the base).3.2.5 Tone/Pulse DiallingThe phone will support three dialling methods: pulse, tone (DTMF), and temporary DTMF. The pulse or tonedialling mode can be set as the default dialling method by the switch located on the base unit. The default diallingmode must be set before entering the TALK mode of operation; it is not possible to change the default dialling modewhile a call is in progress.Temporary DTMF dialling mode is only available when the default method is set to pulse. In that case, pressing the<Tone/*> key will initiate temporary DTMF dialling such that all subsequent digits dialled will be in DTMF(including <*> and <#>). Temporary DTMF dialling will continue until the phone returns to the IDLE mode, atwhich point the default pulse dialling resumes.During DTMF dialling, the <Tone/*> key will dial the DTMF <*> digit. During Pulse dialling, the <#> key has nofunction and will be ignored (even though a key-beep will be generated).3.3 TALK ModeThe TALK and SPEAKERPHONE modes on the handset and the SPEAKERPHONE mode on the base are the mainoperating modes on the phone. In all cases, the phone is off-hook and dialling is possible. In the handset TALK (orSPEAKERPHONE) mode, an RF link is available between the handset and the base and both the transmit andreceive audio paths are open for voice communication.A call timer is available on the handset during the TALK or SPEAKERPHONE mode to show the call duration.3.3.1 Caller ID with Call Waiting (CIDCW)When caller ID data is detected during a call, the call waiting alert will be sounded and the data will be displayed for20 seconds. The alert will occur on the unit or units (i.e. handset or base or both) that are active on the call.3.3.2 FlashWhen the <FLASH> key is pressed during the handset TALK (or base SPEAKERPHONE) mode, a hook flash willbe generated on the telephone line. The LCD display will be cleared during the flash operation. The <FLASH> keywill be invalid until the flash is completed. After a flash, the call timer on the handset will be reset.If <OFF> (or <SPKR> on the base) is pressed or handset is back on the cradle during flashing, the phone will returnto the IDLE mode.Flashing from handset:JOHN SMITH1-212-345-67893.3AM+ call waiting alertcaller ID with call waiting<FLASH > TALK 0:00’00TALK0:25’15

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 25 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeIf the phone is in the handset SPEAKERPHONE mode, a hook flash can also be generated by pressing the <SPKR>key on the handset.During call waiting, pressing <FLASH> will connect the user to the new call (the original call will be placed on holdat the CO). The new call will remain connected until <FLASH> is pressed again to switch back to the first call.3.3.3 Call TerminationHanging up at handset:Hanging up at base:• From the base SPEAKERPHONE mode, press <SPKR> to terminate the call.• The phone will enter the IDLE mode and the base Speakerphone LED will be off.3.3.4 Three-Way ConferenceWhen the handset is active on a call (handset TALK or SPEAKERPHONE mode), the base can join in on the call bypressing <<SPKR>. Similarly, when the base is active on a call (base SPEAKERPHONE mode), the handset canjoin in on the call be pressing <PHONE>.From the base SPEAKERPHONE mode:From the handset TALK mode:TALK 0:02’11on cradleor<OFF>+ Base In Use LED offTALK 0:00’00<PHONE>+ Base In Use LED on< FLASH >+ Base In Use LED stays onTALK 0:03’45TALK 0:00’00line flash

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 26 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice3.4 Incoming Call3.4.1 Normal RingingWhen ringing is detected, the phone will enter the RINGING mode and ringing indication will be made on both thehandset and the base. The indication will include ringer sound and a message on handset LCD. In addition, the baseIn Use LED will blink quickly. All indication will stop and the phone will return to the IDLE mode when theincoming ringing signal terminates.3.4.2 Ringing with Caller ID DataWhen base unit detects the caller ID data that accompanies an incoming call, it will send the data to handset fordisplay and storage.At the handset, the data will be recorded as the most recent entry in the caller ID log. The repeat counter of therecord will be set to “1” by default. If the data of the incoming call matches a previous record already in the log, theprevious record will be deleted but the repeat counter of the current record will be modified accordingly. Themaximum value of the repeat counter is nine, after which it will reset to zero.If the log is already full (maximum of 50 records), the oldest entry will first be deleted to accommodate the incomingdata.Within the log, the records are classified as either “new” or “old” in accordance with the following:TALK 0:02’12TALK 0:02’11<SPKR>+ Base Speakerphone LED on**RINGING**+ Handset ringerring detection+ Base ringer+ Base In Use LED blinking+ Handset ringerring detection caller ID detection+ Base ringer+ Base In Use LED blinking**RINGING** JOHN SMITH1-212-345-67893.3PM**RINGING**5-seconddelay

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 27 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice• if there is new data in CID log previouslycall is not answered – data is “new”call is answered – data is “new”• if there is no new data in CID log previouslycall is not answer – data is “new”call is answered – data is “old”, is offAfter the incoming record is added to the caller ID log, if there is new data in the log, the New Call LED on the basewill blink. Otherwise, the New Call LED will be off.3.4.3 Memory Match RingingWhen received caller ID data matches with one of the entries in the handset directory, the phone will change to adifferent ringer sound to notify the user that the call is coming from an acquaintance. A match is assumed if the lastseven digits of the incoming call are identical to those on one of the directory entries.The memory match ringer is distinguished from the normal ringer and will be changed from the second ring onwards.3.4.4 Answer CallWhen either unit (handset or base) answer an incoming call, the ringing will terminate on both units.Answering a call from the handset:Besides using the <PHONE> key, the user may also press a number of other keys on the handset to answer theincoming call (see Section 3.11.2).Answering a call from the base:<PHONE>+ Handset ringerringdetectioncaller ID detection+ Base ringer+ Base In Use LED blinkingJOHN SMITH1-212-345-6789 TALK 0:00’00**RINGING**+ Base ringer off+ Base In Use LED on+ Base New Call LED off+ Base New Call LED blinking + Handset ringer off<SPKR>+ Handset ringerringdetectioncaller ID detection+ Base ringer+ Base In Use LED blinkingJOHN SMITH1-212-345-6789**RINGING**+ Base ringer off+ Base In Use LED off+ Base Speakerphone LED on+ Base New Call LED off+ Base New Call LED blinking + Handset ringer off

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 28 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeIf there are no new calls in the caller ID log prior to the incoming call, the New Call LED will remain off becausethe received data will be regarded as old (see Section 3.4.2).3.5 HoldA call can be placed on hold from the unit (handset or base) that is active on the call. The phone differentiatesbetween the handset HOLD mode and the base HOLD mode based on where the hold was initiated. During theHOLD mode, all keys will be ignored except <INT.COM> and <PHONE> on the handset, and <INT.COM> and<SPKR> on base.3.5.1 Place Call on HoldHolding from handset (handset HOLD):Holding from base (base HOLD):3.5.2 Release HoldEither the handset or the base can release a call that has been placed on hold, regardless of where the hold wasinitiated. If the handset releases a call that was placed on hold by the base, the call timer displayed on the handsetwill start from zero.From handset HOLD mode:orHOLD<HOLD>+ Base Speakerphone LED blinking slowlyTALK 0:02’16HOLD 0:02’15<PHONE>+ Base In Use LED onHOLD 0:02’12TALK 0:02’11<HOLD>+ Base In Use LED blinking slowly

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 29 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeFrom base HOLD mode:or3.5.3 Automatic Hold ReleaseWhen off-hook is detected on a parallel telephone set, the phone will release the hold and go back to the IDLE modeunless the off-hook is detected during intercom or paging with the line on hold.3.5.4 CIDCW during HoldWhen caller ID data is detected while a line is on hold, the data will be displayed on the handset LCD for 20seconds, after which HOLD will be redisplayed. The caller ID data will not be redisplayed when the call is releasedfrom hold.3.6 Intercom3.6.1 Page to Initiate IntercomEither the handset or base can page its partner unit to initiate an intercom (paging will not be available if handset isresting on the cradle). The paged unit will be alerted with a paging sound (one-minute alert for handset and a singlepage sound for the base). The initiating unit can cancel the page (<INT.COM> for the base, or <OFF>or on-cradle forthe handset) or the page can time-out. In either case, the phone will return to the IDLE mode.HOLD 0:02’15<SPKR>+ Base In Use LED off+ Base Speakerphone LED onTALK 0:00’00HOLD <PHONE>+ Base In Use LED onHOLD <SPKR>+ Base Speakerphone LED on+ call waiting alertcaller ID with call waiting5-secdelayHOLD 0:25’15 HOLD 0:25’35JOHN SMITH1-212-345-67893.3AM

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 30 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeIf the base pages the handset, the phone will enter the INTERCOM mode if the handset respond to the page bypressing <INT.COM>. However, if the handset pages the base, the phone will enter the INTERCOM modeautomatically after the single page, with no additional response from the base required. In the latter case, the basepaging alert will be sounded even if the base ringer has been turned off.Pressing <INT.COM> on the base or <OFF> on the handset (or handset on-cradle) will terminate the intercom. Whenone unit ends the intercom, a key beep will sound on the partner unit to confirm the termination.When ringing is detected during paging, the paging will stop and the phone will go to the RINGING mode.Base initiating intercom:Handset initiating intercom:3.6.2 Paging during a CallWhen a unit (handset or base) page its partner unit while it is active on a call, the initiating unit will receive a busyindication via a busy tone. The LCD will also briefly display a BUSY message (for 5 seconds), after which anyprevious display will be resumed.Handset initiating intercom:<INT.COM>+ Base paging sound+ Base Intercom LED blinking**PAGING** INTERCOM<OFF >or<INT.COM >+ Base Intercom LED on+ Base Intercom LED off+ Base key beep**PAGING**<INT.COM>+ Base Intercom LED blinkingINTERCOM<INT.COM><INT.COM >or<OFF>+ Base Intercom LED on+ Base Intercom LED off+ Handset paging sound+ Handset key beep

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 31 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeBase initiating intercom:• Press <INT.COM> to page the handset (phone is in the handset TALK mode)• Base busy tone will sound for five (5) seconds; phone will remain in the handset TALK mode3.6.3 Ring Detection during IntercomIf ringing is detected while the phone is in the INTERCOM mode, the handset LCD will display a **RINGING**message followed by caller ID data. The ringer will only sound at the base and the ringing level will be lowregardless of the ringer setting.If either unit ends the intercom, the phone will change to the RINGING mode and the ringer levels will resume to thenormal ringing settings. Alternatively, if the handset or base answers the call, the intercom will also be terminatedand the phone will change to the handset TALK (or SPEAKERPHONE) or the base SPEAKERPHONE modeaccordingly.3.6.4 Transfer Call via IntercomThe intercom can be used to co-ordinate the transfer a call between the handset and base and vice-versa. If<INT.COM> is pressed at the handset during the handset TALK mode, or if <INT.COM> is pressed at the base duringthe base SPEAKERPHONE mode, the call is first placed on hold before the intercom is initiated.During the intercom, pressing <PHONE> on handset will switch the phone to the handset TALK mode while pressing<SPKR> on base will switch the phone to the base SPEAKERPHONE mode. The call timer will restart from0:00’00 if the call was transferred between the handset and base.BUSY<INT.COM>+ Handset busy toneBUSY<INT.COM>BUSY<INT.COM>5 sectimeoutring detection caller ID detection+ Base ringer (low vol)+ Base In Use LED blinking rapidly <SPKR >+ Base Intercom LED off+ Base In Use LED on+ Base Intercom LED off+ Base In Use LED off+ Base Speakerphone LED on<PHONE >**RINGING**TALK0:00’00INTERCOM JOHN SMITH1-212-345-67893.3AM

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 32 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeIf the page times out (handset only) or it is cancelled by the paged unit (using <OFF> in the case of the handset or<INT.COM> in the case of the base), the phone will return to the appropriate HOLD mode.Switching from base to handset:Switching from handset to base:3.6.5 CIDCW during Paging with Line on HoldWhen caller ID data is detected during paging with a line on hold, the handset LCD will briefly display the data (for20 seconds), after which the previous **PAGING** message will be resumed unless the paging has timed out. Thecall waiting alert will also be heard in addition to the paging sound.Handset being paged:<INT.COM>+ Base paging sound+ Base Intercom LED blinking**PAGING** 0:02’16HOLD 0:02’15INTERCOM 0:02’32<SPKR >+ Base Intercom LED on+ Base Intercom LED off+ Base In Use LED off+ Base Speakerphone LED on**PAGING**HOLD <INT.COM>+ Base Intercom LED blinkingINTERCOM 0:00’00<INT.COM>TALK 0:00’35<PHONE >+ Base Intercom LED on+ Base In Use LED on+ Handset paging sound

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 33 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice3.6.6 CIDCW during Intercom with Line on HoldWhen caller ID data is detected during intercom with a line on hold, the call waiting alert will be sounded. Inaddition, the handset LCD will briefly display the data (for 20 seconds), after which the previous INTERCOMmessage will be resumed.3.7 Caller ID FunctionsEach displayed caller ID record contains the following information:• Name (up to 15 ASCII characters), displayed on the first line of the LCD• Phone number (details of display format below), displayed on the second line of the LCD• Time and date stamp (time in 12-hour format), displayed on the right half of the icon/status line at thebottom of the LCD• Repeat counter (single-digit, from 1 to 9), displayed in reversed video as the 16th character of thesecond line (only available when reviewing a caller ID record from the log)Alternatively, it may contain one of the following messages if the incoming caller ID record indicates out-of-area,private, or long distance, and the name or the name and phone number data is unavailable:• OUT OF AREA• PRIVATEINTERCOM 0:25’35+ call waiting alertcaller ID with call waiting5-secdelay+ Handset paging sound + Handset paging soundJOHN SMITH1-212-345-67893/3 8:35 AMINTERCOM 0:25’15JOHN SMITH 21-212-345-6789PM0210.22605**PAGING** 0:25’35+ call waiting alertcaller ID with call waiting5-secdelay+ Handset paging sound + Handset paging soundJOHN SMITH1-212-345-67893/3 8:35 AM**PAGING** 0:25’15

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 34 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice• LONG DISTANCEIf there are errors detected in the incoming caller ID data (indicated by an invalid checksum), a TRANSMISSIONERROR message will be displayed on the LCD when the data is received. However, the record will not be storedinto the handset caller ID log.Where there is a phone number available in the incoming caller ID data, the number will be in one of two formats –direct dial number (DDN) or dial number (DN). For DDN, all the digits in the data will be displayed withoutmodifications, only adding “-“ in the appropriate places as separators (e.g. 12123456789 becomes 1-212-345-6789while 3456789 becomes 345-6789). For DN, the number of digits displayed for the phone number is determinedbased on matching the area code of the incoming call (where available from the local telephone company) with thearea code(s) configured in the phone. If the area code matches the home area code, the call is assumed to be localand the seven-digit phone number is displayed (e.g. 2123456789 becomes 345-6789). Alternatively, if the area codematches one of the local area codes, the complete ten-digit phone number is displayed (e.g. 2123456789 becomes212-345-6789). Otherwise, the call is assumed to be long-distance, and phone number displayed will include thepreceding “1” for long distance dial (e.g. 2123456789 becomes 1-212-345-6789).While a caller ID record is being reviewed (from the log) on the handset, additional operation that can be performedon the data includes dialling the displayed number, programming the data into the directory, or erasing the record.3.7.1 Review Caller ID RecordsFrom the IDLE mode, the phone can enter the handset MEMORY REVIEW mode to review the caller ID log. Thereview operation can be initiated by using either <◄ > or < ►> to begin scrolling through the data (<◄ > will startfrom the most recent while < ►> will start from the oldest record).During review of caller ID data, only <SELECT>, <◄ >, < ►>, <PHONE>, and <PGM> will be valid.< ►>or<◄><◄ ><◄ ><◄ ><◄ >< ►><◄ >+ Handset key beep+ Base New Call LED off+ Base New Call LED blinking20 sec timeoutor<OFF>NEW 02 OLD 02JOHN SMITH 31-212-345-6789NEW0210.22PMEND OF LISTNEW0211JOHN SMITH 31-212-345-6789NEW0210.22PMLONG DISTANCENEW0210.22PMVTECH ELECTRONC1273-5131NEW0210.23AMPRIVATENEW0210.23PM

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 35 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeWhile the data is displayed, the LCD will clear and the handset will go back to the IDLE mode after a 20-secondtimeout with no operation, or when<OFF> is pressed, or if the handset is placed on the cradle. If ringing is detectedduring data display, the handset will go to the RINGING mode.Once all the new caller ID records have been reviewed, the records will be marked as “old data” as soon as thereview operation is completed. However, if there are still records that have not been reviewed when the reviewoperation is terminated, the new data will remain as “new”, even if some has just been reviewed.It will be possible to review the caller ID data on the handset even if the base is in the base SPEAKERPHONEmode.3.7.2 Call BackDuring display of a caller ID record, the data can be selected for call back and the numbers can be easily dialledwithout re-entering the digits on the keypad. The area code(s) configured for the phone will be used to determine thedigit string to be dialled (e.g. whether a preceding “1” for long distance calling is required) so user intervention tocorrect the dialled number can be minimised. If no home area code has been configured, a NO AREA CODEmessage will be displayed on the LCD and the phone will return to the IDLE mode with an error beep.3.7.3 Program Caller ID Data into DirectoryDuring display of a caller ID record, the data can be selected for programming into the directory. The data can beedited prior to storing into the directory (see Section 3.8.1 for details on movement of the cursor and characterinput).TALK 12-second delay+ Base In Use LED onTALK 0:00’00TALK 2735131TALK 0:00’25. . . diallingVTECH ELECTRONC273-5131 DIAL PGM ERASE273-5131<►><SELECT>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 36 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeThe number of digits in the phone number can be modified by pressing <#> repeatedly until the phone number withthe correct number of digits appears in the display.Area code in caller ID record matching home area code:Area code in caller ID record not matching home area code:If name data is not available, "OUT OF AREA", or "PRIVATE", the display will prompt for a name for the directoryentry. If number data is not available, "OUT OF AREA", "PRIVATE", or “LONG DISTANCE”, the display willprompt for a dial string for the directory entry.If memory is full, a MEMORY FULL message will be displayed along with an error beep and the display willsubsequently return to the caller ID record. If no home area code has been configured, a NO AREA CODE messagewill be displayed on the LCD and the phone will return to the IDLE mode with an error beep.JOHN SMITH212-345-6789JOHN SMITH1-212-345-6789JOHN SMITH345-6789<#>JOHN SMITH1-212-345-6789<#><#><#>+ Handset confirmation beep<SELECT>or<PGM>JOHN SMITH12123456789DIAL PGM ERASE1-212-345-6789JOHN SMITH 31-212-345-6789 DIAL PGM ERASE1-212-345-6789<►><SELECT>JOHN SMITH112123456789JOHN SMITH112123456789<6><SELECT>or<PGM><1>JOHN SMITH112123456789JOHN SMITH1121234567896<◄><SELECT>JOHN SMITH1-345-6789JOHN SMITH212-345-6789JOHN SMITH1-212-345-6789<#>JOHN SMITH345-6789<#><#><#>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 37 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice<OFF> will cancel the programming operation and the display will return to the caller ID record. If the handset isplaced on the cradle, the phone will change to the IDLE mode.3.7.4 Delete Caller ID DataOnce reviewed, caller ID data can be deleted from the handset caller ID log. If all data has been reviewed (i.e. nonew calls), an option will be provided in the menu to delete all the records in the log. Otherwise, only the currentrecord that is being reviewed can be erased.Erasing a single record:Once a caller ID record is deleted, a confirmation beep will be sounded and the next (older) record will be displayed.When the last record in the log has been deleted, an END OF LIST message will be displayed on the LCD.Erasing all caller ID data:<SELECT>+ Handset confirmation beepERASE NO YES273-5131ERASE NO YES273-5131JOHN SMITH121234567896DIAL PGM ERASE273-5131DIAL PGM ERASE273-5131VTECH ELECTRONC273-5131 DIAL PGM ERASE273-5131< ►><SELECT>< ►><SELECT>< ►>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 38 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeThe delete operation will be cancelled if <OFF> is pressed or user selects not to erase the record(s). In these cases,the LCD will go back to caller ID review and re-display the current record. On the other hand, if the handset isreplaced on the cradle or the delete operation times-out after 20 seconds, the phone will return to the IDLE modewith a key beep.3.8 PROGRAM ModeThe PROGRAM mode provides the capability for the user to configure the following data:• Handset directory entries (up to 50)• Base speed dial list entries (up to 10)• Home area code• Local area codes (up to 5)• Handset ringer type• Handset ringer volume• VMWI setting• Voice announce setting (option)All user-configured data will be stored in non-volatile memory.NEW 00 OLD 00<SELECT>+ Handset confirmation beepERASE NO YES ALL273-5131ERASE NO YES ALL273-5131 DIAL PGM ERASE273-5131DIAL PGM ERASE273-5131VTECH ELECTRONC273-5131 DIAL PGM ERASE273-5131< ►><SELECT>< ►><SELECT>< ►>ALL ERASE NO YES273-5131ERASE NO YES ALL273-5131 ALL ERASE NO YES273-5131< ►><SELECT>< ►>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 39 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeGenerally, programming can only be initiated if the phone is in the IDLE mode (except for programming caller IDdata into the handset directory, see Section 3.7.3). However, it will be possible to program the handset directoryduring the base SPEAKERPHONE mode, or program the base speed dial list during the handset TALK (orSPEAKERPHONE) mode.After <PGM> is pressed to enter the handset PROGRAM mode, only the <SELECT>, < ►>, <◄ >, <#>, <*> and<PHONE> keys will be valid. Once the phone is in the PROGRAM mode, there is a 20-second time-out for keyinput.Pressing <SELECT> or <PGM> at the end of the programming sequence will complete the operation. If there are noinput errors, the new data will be stored into memory and the phone will return to the IDLE mode with a confirmationbeep. Otherwise, in the event of an input time-out or a programming error, an error beep will be sounded and thephone will go to the IDLE mode.If there is an incoming ring or page during the PROGRAM mode, the ringer or paging alert will be sounded but theprogramming operation can continue. The display of the caller ID data associated with the incoming call will bepostponed until the current programming sequence is completed or if <PHONE> is pressed. In the latter case, thephone will abort the programming and go to the TALK mode.3.8.1 Program Handset DirectoryStart of programming:Each directory entry includes a name and the associated telephone number. The maximum number of directoryentries is 50 (less if there are longer entries). If memory is full, a MEMORY FULL message will be displayed alongwith an error beep and phone will go to the IDLE mode.The name can be up to 16 alphanumeric characters. The alphanumeric characters can be entered via the<Dial> keys;additional keys that are acceptable during the name entry phase include <SELECT>, < ►>, <◄ >, and <PHONE>(< ►> is not valid until at least one character has been entered). By pressing a <Dial> key repeatedly, a series ofdifferent characters can be entered from the same key as follows:<1> = 1DIRECTORY AREARINGER<PGM>ENTER NAME<SELECT>DIRECTORY AREARINGER<PGM> DIRECTORY AREARINGER<►><◄>DIRECTORY AREARINGER<►><◄><OFF>MESSAGE WAITINGLIGHT-OFF RESET<#>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 40 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice<2> = A  B  C  2  A<3> = D  E  F  3  D<4> = G  H  I  4  G<5> = J  K  L  5  J<6> = M  N  O  6  M<7> = P  Q  R  S  7  P<8> = T  U  V  8  T<9> = W  X  Y  Z  9  W<0> = 0<*> = *<#> = &  ‘  ,  -  .  # &During data entry, the cursor location is represented by the blinking character on the display. Generally, if adifferent <Dial> key is pressed, the cursor will advance to the next position automatically. However, the cursor canalso be moved using the < ►> and <◄ > keys. < ►> will move the cursor forward if the next character to be entereduses the same <Dial> key as the previous character. <◄ > will shift the cursor to the left and erase the character atthe previous position. <SELECT> or <PGM> will complete the name input and continue to telephone number input.The telephone number typically includes up to 16 dial digits, including <FLASH> and <PAUSE>. A longer number,one with up to 32 dial digits, can also be accommodated. However, each entry that has an extended telephonenumber (i.e. beyond 16 dial digits) will decrease the total number of entries available in the directory by one (e.g. thedirectory will have a maximum of 25 entries if all entries have extended telephone numbers). When the 17th digit isentered, the display will scroll as follows:Valid keys that can be used to enter the dial string include <Dial>, <REDIAL>, <FLASH> and <PAUSE> (<FLASH>is only valid as the very first digit); additional keys that are acceptable during the telephone number input phaseinclude <SELECT>, <◄ >, <PHONE>, and <PGM>. The cursor will advance each time a valid input key is pressed.<◄ > will shift the cursor to the left and erase the digit at the previous position. If <REDIAL> is pressed but theredial buffer is empty, an error beep is sounded as warning but telephone number input will continue.12345678901234567ENTER NAME J<5><6><6><6>JOHJOJOHNJOHN_ <6><6><4><4><SELECT>JOHNJOHNN <◄ ><6><6><SELECT>or<PGM>ENTER NUMBER

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 41 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice<SELECT> or <PGM> will complete the telephone number input and the new entry will be stored into the handsetdirectory.3.8.2 Program One-Touch Memory Dialling Keys (Option)In models include one or more user-programmable, one-touch memory dialling keys on the handset, the user canconfigure the desired digit string to be dialled when the associated memory key is pressed. Programming a<QuickMEM> key is similar to adding a directory entry and is initiated from the same menu sequence.If a <QuickMEM> key is pressed in place of a <Dial> key as the first alphanumeric character during the name input,the user is prompted to input the telephone number that will be associated with the selected key. The limitations ofthe digit string that can be entered will be the same as those for the telephone number in a directory entry.3.8.3 Program Home Area CodeThe home area code is configured to facilitate proper display of the phone number in the caller ID record. The homearea code is compared to the area code of the incoming caller ID data to determine when a seven-digit display isappropriate.If no area code has been configured for the phone, a NO AREA CODE message will display for 20 seconds on thehandset LCD when the phone first powers on.Start of programming:Entering the area code:ENTER AREA CODEHOME LOCAL<SELECT>ENTER AREA CODE212Not previously programmed Previously programmedDIRECTORY AREARINGER DIRECTORY AREARINGER<►><SELECT>DIRECTORY AREARINGER<PGM>ENTER NAME<SELECT><QuickMEM>ENTER NUMBER

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 42 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeThe home area code is three-digit long. Only the <Digit> keys can be used for entering the area code; additionalkeys that are acceptable during the area code input phase include <SELECT>, <◄ >, <PHONE>, and <PGM>. Thecursor will advance each time a valid input key is pressed. <◄ > will shift the cursor to the left and erase the digit atthe previous position.<SELECT> or <PGM> will complete the home area code input and the data will be stored into memory. <SELECT>will be ignored until all three digits have been entered. Pressing <PGM> prior to completion of all three digits willbe a programming error.3.8.4 Program Additional Area CodesBesides the home area code, up to five additional local area codes can be configured for the phone. Similar to thehome area code, these local area codes are used to facilitate display of the phone number in the caller ID data. Thelocal area codes are compared to the area code of the incoming caller ID data to determine when a ten-digit displayis appropriate.Start of the programming:Entering the area code:HOME LOCALDIRECTORY AREARINGER DIRECTORY AREARINGER< ►><SELECT>HOME LOCAL#1 #2 #3 #4 #5303 #1 #2 #3 #4 #5416< ►><SELECT>#1 #2 #3 #4 #5 ENTER AREA CODE<SELECT><►>< ►>ENTER AREA CODEENTER AREA CODE212Not previously programmedPreviously programmedENTER AREA CODE6ENTER AREA CODE60<0><SELECT>or<PGM>ENTER AREA CODE604<4><6>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 43 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeEach local area code is three-digit long. Only the <Digit> keys can be used for entering the area code; additionalkeys that are acceptable during the area code input phase include <SELECT>, <◄ >, <PHONE>, and <PGM>. Thecursor will advance each time a valid input key is pressed. <◄ > will shift the cursor to the left and erase the digit atthe previous position.<SELECT> or <PGM> will complete the local area code input and the data will be stored into memory. <SELECT>will be ignored until all three digits have been entered. Pressing <PGM> prior to completion of all three digits willbe a programming error. However, if the <PGM> key is pressed when the entry is cleared via repeated <◄ > on thecurrent data, this will erase the selected local area code from memory.3.8.5 Configure Handset Ringer SettingThe handset ringer settings include the ringer type and ringer volume. The user can select a ringer type from one offour types or turn the handset ringer off. The ringer volume can also be set to one of three loudness level.Configuring the handset ringer type:ENTER AREA CODEENTER AREA CODE403Not previously programmedPreviously programmedENTER AREA CODE7ENTER AREA CODE71<1><SELECT>or<PGM>ENTER AREA CODE718<8><7>+ Handset confirmation beep

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 44 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeWhen the menu selection is made to program the ringer type, the current setting will be displayed. Immediately aftera key input to select the ringer type (<1>, <2>, <3>, <4>), the selected ringer will sound to provide auditoryfeedback (no key beep will be generated). If <0> to turn off the ringer, there will be no ringer sounded but a keybeep will provide input confirmation.Configuring the handset ringer volume:DIRECTORY AREARINGERDIRECTORY AREARINGER DIRECTORY AREARINGER< ►>< ►>RINGER 2SELECTEDRINGER 1SELECTED<SELECT>RINGER 4SELECTEDRINGER OFFSELECTED...<0><4><SELECT>or<PGM><1>RINGER TYPE VOL<SELECT>+ Handset confirmation beep

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 45 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeWhen the menu selection is made to program the ringer volume, the current setting will be displayed. The <◄ > and<◄ > keys are used to increase or decrease the volume respectively. Immediately after the key input, the ringer willsound at the corresponding level to provide auditory feedback (no key beep will be generated). Increasing thevolume beyond the highest level or decrease it beyond the lowest level will cause an error beep to sound, butprogramming can continue.3.8.6 Configure VMWI SettingThe setting(s) for the VMWI (see Section 3.11.6 for further details on the VMWI feature) can be modified in thehandset PROGRAM mode to clear the VMWI or reset the VMWI detection mechanism.Clearing the VMWI will turn off base Message LED and clear MESSAGE WAITING display from handset LCD.The indication will remain off until another message waiting signal is received from the local telephone company.The VMWI detection mechanism can be reset to use both FSK and stutter dial tone detection where the latter optionis available. This operation will also clear the VMWI (base Message LED and handset LCD message).3.9 Memory Review and ModificationThe phone has a number of parameters that are stored in memory. They include user-configured data (handsetdirectory, base speed dial list, home area code, local area codes, ringer type, and ringer volume) as well as systemupdated data (caller ID log, and handset/base redial buffers). The data associated with these parameters can be<SELECT>DIRECTORY AREARINGER<PGM> MESSAGE WAITINGLIGHT-OFF RESET<#>MESSAGE WAITINGLIGHT-OFF RESET<►>+ Handset confirmation beep+ Handset confirmation beepDIRECTORY AREARINGERDIRECTORY AREARINGER DIRECTORY AREARINGER< ►>< ►>)))<SELECT><SELECT>or<PGM>))RINGER TYPE VOL<SELECT>< ►>RINGER TYPE VOL)< ►>< ►>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 46 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticereviewed, and often modified, explicitly. In some cases, the data can be accessed for review during the IDLE modethrough separate menu operation. In other cases, the data can only be reviewed by entering the PROGRAM modeand selecting the appropriate parameter. During the PROGRAM mode, any current setting/data for the parameterwill be displayed. The user can then modify, or sometimes delete, the data for the parameter within the PROGRAMmode.Data Review Modify DeleteUser-programmedHandset Directory menu, from IDLE mode menu, during review menu, during reviewHandset Memory Keys menu, from IDLE mode menu, during review function not availableHome Area Code during programming during programming function not availableLocal Area Codes during programming during programming during programmingRinger Type during programming during programming function not availableRinger Volume during programming during programming function not availableSystem-updatedCaller ID Log menu, from IDLE mode function not available menu, during reviewHandset Redial Buffer <REDIAL>, from IDLEmode function not available <REDIAL>, during reviewThe following subsections describe the details of the MEMORY REVIEW mode (where the data review andmodification operations are accomplished outside of the PROGRAM mode). They include the handset directory andhandset redial buffer. The caller ID log is described separately in Section 3.7.3.9.1 Handset DirectoryWhile a directory entry is being reviewed on the handset, additional operation that can be performed on the dataincludes dialling the displayed number, modifying the data, or erasing the entry.3.9.1.1 Review DirectoryThe directory on the handset can be reviewed from the IDLE mode by using <SELECT> to begin scrolling throughthe data.+ Handset key beepTELELINK1234567PP2366789VTECH ELECTRONC2735131 BILL W16173506678A MAJOR01185223457890DIRECTORY < ►><SELECT>< ►>< ►>END OF LIST VTECH ELECTRONC2735131<◄ >< ►>< ►>20 sec timeoutor<OFF>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 47 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeDuring review of directory entries, only <SELECT>, <◄ >, < ►>, <Dial>, and <PHONE> will be valid.If the telephone number in the directory entry has more than 16 digits, the display will change after a brief 2-seconddelay to show the complete phone number.The entries can be scrolled in sequence or an index can be used for navigation within the directory. The order ofscrolling the entries using < ►> will be as follows:1: A to Z2: other ASCII code3: *, #4: 0 to 9If a <Dial> key is pressed anytime during display of a directory entry, the input will be used as index and update thedisplay to show the first entry that matches the index. The mapping of the <Dial> keys to the alphanumericcharacters for indexing will be based on the scheme for character input (see Section 3.8.1).While the data is displayed, the LCD will clear and the handset will go back to the IDLE mode after a 20-secondtimeout with no operation, or when<OFF> is pressed, or if the handset is placed on the cradle. If ringing is detectedduring data display, the handset will go to the RINGING mode.3.9.1.2 Modify Directory EntriesDIAL ERASE EDIT1234567PP2366789VTECH ELECTR2735131<SELECT>2-sec delay(no other operation)TELELINK1234567PP2366789 1234567PP2366789451892633<◄ >ELI JACOBS2735131END OF LIST DIANA KDAVID JONES16173506678DIRECTORY D ALDER3457890<SELECT>D ALDER3457890 J TANAKA<3>or< ►><3><3>or< ►><3>or< ►><3>or< ►><5>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 48 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeWhen editing the data in a directory entry, the movement of the cursor and the method for alphanumeric characterinput will be identical to the directory data input during the handset PROGRAM mode (see Section 3.8.1). If theediting sequence completes successfully, the directory entry will be updated in memory with the modification.<OFF> will cancel the edit operation and the data in the stored entry will be redisplayed. If the handset is placed onthe cradle, the phone will change to the IDLE mode.3.9.1.3 Delete Directory EntriesOnce a directory entry is deleted, a confirmation beep will be sounded and the next directory entry will be displayed.When the last entry has been deleted, an END OF LIST message will be displayed on the LCD.The delete operation will be cancelled if <OFF> is pressed or user selects not to erase the entry. In this case, theLCD will go back to directory entry review and re-display the current entry. On the other hand, if the handset isreplaced on the cradle or the delete operation times-out after 20 seconds, the phone will return to the IDLE modewith a key beep.<SELECT>+ Handset confirmation beepERASE NO YES273-5131ERASE NO YES273-5131JOHN SMITH121234567896DIAL EDIT ERASE273-5131DIAL EDIT ERASE273-5131VTECH ELECTRONC273-5131 DIAL EDIT ERASE273-5131<►><SELECT><►><SELECT><►>+ Handset confirmation beep<SELECT>or<PGM>JOHN SMITH12123456789DIAL EDIT ERASE1-212-345-6789JOHN SMITH1-212-345-6789 DIAL EDIT ERASE1-212-345-6789< ►><SELECT>JOHN SMITH112123456789JOHN SMITH112123456789<6><SELECT>or<PGM><1>JOHN SMITH112123456789JOHN SMITH112123456789JOHN SMITH1121234567896 <◄ ><SELECT>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 49 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice3.9.2 Handset Memory Key Entries (Option)The mapping of the handset memory keys are maintained as special entries within the handset directory. While theyare not part of the 50 named entries that are available for general user definition, they are stored and can bereviewed and modified using the same menu sequence (though with some additional restrictions).3.9.2.1 Review Handset Memory Key EntriesThe digit string that has been programmed to each memory key can be reviewed from the IDLE mode by using<SELECT> to begin scrolling the directory. During the display of any directory entries, pressing a <QUICKMEM>key will update the display to show the entry associated with the selected key.The memory keys are identified by “MEMORY x” in the directory, where “x” is a single digit (starting from “1”)that refers to each memory dialling key. Thus, it will also be possible to view these entries by scrolling to theportion of the handset directory with the “M” entries.If ringing is detected during data display, the handset will go to the RINGING mode.3.9.2.2 Modify Handset Memory Key EntriesThe digit string assigned to a key can be modified by reprogramming the <QUICKMEM> key (see Section 3.8.2) orby selecting to edit the data when reviewing the memory key entry. With the latter approach, unlike a typicaldirectory entry, the name of a memory key entry (“MEMORY x”) cannot be modified; the user will only be able tochange the telephone number. Pressing <SELECT> or <PGM> will complete the edit operation and program thenew digit string to the associated <QUICKMEM> key.<OFF> will cancel the edit operation and the data in the stored entry will be redisplayed. If the handset is placedon the cradle, the phone will change to the IDLE mode.3.9.2.3 Delete Handset Memory Key EntriesThere is no explicit operation to delete handset memory key entries once they have been entered. However, the digitstring can be cleared when modifying the memory key entry.3.9.3 Redial3.9.3.1 Review Handset Redial Buffer+ Handset key beepMEMORY 12735131A MAJOR01185223457890DIRECTORY<QuickMEM><SELECT>< ►>20 sec timeoutor<OFF>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 50 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeIf the contents of the redial buffer has more than 16 digits, the lower row in the LCD will also be used to display thecomplete number. The display of the redial buffer will clear after five seconds and the phone will go back to theIDLE mode. If a key is pressed during the display, it will be treated as input during the IDLE mode and the phonewill change state accordingly. Similarly, if ringing is detected during the display, the phone will change to theRINGING mode.It will be possible to review the redial buffer on the handset even if the base is in use.3.9.3.2 Delete Redial NumberIf the <REDIAL> key is pressed twice within five seconds when the phone is in the IDLE mode, the contents of theredial buffer will be erased (this operation is valid even if the buffer is already empty). The deletion operation isavailable for both the handset and base redial buffers. After the redial buffer is cleared, the phone will go back to theIDLE mode with a confirmation beep.3.10 Voice Announce (Option)The voice announce feature provides an audio announcement of an incoming call over the base and handsetspeakerphone. The announcement is based on the incoming caller ID data and can be one of three types: user-recorded names, pre-recorded generic announcements, or numeric announcement.When the voice announce feature is enabled, the phone number portion of the caller ID data determines which typeof announcement is made. When the number of the calling party matches one of the entries in the handset directory(the matching is based on the last seven digits of the phone number), the voice tag associated with the entry will beplayed. The voice tag is recorded by the user to identify the directory entry (generally the name will be used). Itmay be recorded when the entry is created, or added subsequently.If no match for the caller number can be found in the handset directory, the caller ID data indicates a private orout-of-area caller, or the call has been intercepted by the Privacy Manager at the local telephone company (whereavailable), a standard announcement that corresponds to “Unknown Caller”, “Private Caller” or “PrivacyManager, press ‘1’ to continue”, respectively, will be made. These three standard announcements are pre-programmed on the phone.16042735131<REDIAL>5-sectimeout<SELECT>+ confirmation beep16042735131<REDIAL>< 5 sec<REDIAL>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 51 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeThe “Unknown Caller” announcement will not be used for no matched entries if numeric announcements areenabled. In this case, or if no announcement message has been recorded for a matched entry, numericannouncement of the digits of the incoming number will be made.Caller ID announcement will be made if the phone is in the RINGING mode. The announcement is made during thefour-second interval between the second and third incoming rings. Subsequent ringing will be suppressed until thevoice announcement is completed. The announcement will not be made if the base or handset is in theSPEAKERPHONE or INTERCOM mode.3.10.1 Add AnnouncementThe recording is done via the mouthpiece microphone. The recording time will be for two seconds; however, anyleading or trailing silence will be removed when the recording is stored into memory for subsequent replays.After recording is completed, the user can select to play back the recording. If the user selects to play the recordedmessage, the announcement will be made at the base speakerphone (and the handset speakerphone, whereavailable).3.10.2 Review AnnouncementsReview of the user-recorded announcements is available in the MEMORY REVIEW mode, during the display ofdirectory entries. A small “V” symbol in the lower right-hand corner of the LCD will be shown if the entry has anassociated voice tag. The voice tag can be accessed if <#> is pressed when the entry is displayed. The user will begiven an option for audio playback of the associated announcement. Similar to the playback during the recordingphase, the audio will be played on the base speakerphone ( and handset speakerphone, where available).ENTER NUMBERRECORDING RECORD AFTER BEEPRECORD NAMEYES NOPLAYYES NO REDO<SELECT>PLAYYES NO REDOPLAYYES NO REDO<SELECT><SELECT>recordingbeepentering phonenumber< ►>. . .+ Handset confirmation beep2 sec< ►>recordingbeep<SELECT>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 52 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeIf an entry does not have a voice tag recorded, an error beep will sound if the user attempts to access theannouncement via <#>. However, the phone will remain in the MEMORY REVIEW mode and the current directoryentry will continue to be displayed on the LCD.3.10.3 Modify AnnouncementsModification of user-recorded announcements includes changing the current recording for a directory entry, andadding a new recording to an entry (no previous voice tag). These operations are available during the MEMORYREVIEW mode, when editing individual directory entries.+ voice tag playback<#>< ►>2-seconddelay+ Handset error beep<#>NO NAME RECORDEDA MAJOR01185223457890A MAJOR BILL W16173506678TELELINK1234567PP2366789 < ►>BILL W16173506678

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 53 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeDuring the edit operation, the first <SELECT> or <PGM> pressed completes the name modification while a second<SELECT> or <PGM> completes the telephone number modification (see Section 3.9.1.2). Once the number inputis complete, the RECORD NAME YES NO menu selection will be available for the user to add a voice tag if noprevious recording has been. Otherwise, a PLAY NAME YES NO REDO menu option will be available for the userto change the voice tag (strictly playback without re-recording the name will also possible without generating anerror). Similar to the operation to add announcement, recording will be done via the mouthpiece microphone. Therecording time will be for four seconds and any leading or trailing silence will be removed when the recording isstored into memory for subsequent replays. Playback of the recording will be done via the base and handsetspeakerphone.If the user does not want to make any changes to the voice tag associated with the directory entry, selecting “no”for playback to exit the edit operation.3.10.4 Program Announcement SettingsThe user has the capability to enable or disable the voice announcement feature. The settings available includes:• Turn on all (name, numeric and standard) types of voice announcements<SELECT><SELECT>< ►><SELECT><SELECT><SELECT>recordingbeep< ►>+ Handset confirmation beep< ►>recordingbeepPLAY NAMEYES NO REDORECORD AFTER BEEP PLAY NAMEYES NO REDOPLAY NAMEYES NO REDO<SELECT>< ►>PLAY NAMEYES NO REDO PLAY NAMEYES NO REDO RECORDINGA MAJOR01185223457890A MAJOR01185223457890A MAJOR01185223457890A MAJOR01185223457890DIAL EDIT ERASE01185223457890DIAL EDIT ERASE01185223457890

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 54 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice• Turn on name (and standard announcements)• Turn off voice announcements3.11 Special Features3.11.1 Call TimerWhile the phone is connected on a line, a call timer will display to indicate the duration of the call. The call timer isshown on the second line of the LCD as follows:The maximum count of the timer is 9 hours 59 minutes and 59 seconds (9:59’59) after which the timer will be reset(0:00’00). The timer will be started when the call is first connected (i.e. excludes dial time for outgoing calls). Ingeneral, the count of the timer will be maintained even if the mode of the phone changes, as long as the line is stillseized (e.g. from TALK to HOLD to INTERCOM and back to TALK). However, the timer will be reset subsequentto a hook flash or when the active unit is switched (e.g. from handset to base or vice-versa) during a call.3.11.2 Easy-AnswerThe easy-answer feature facilitates in-the-dark answering of incoming calls. When the phone is in the RINGINGmode and the handset is off-cradle, pressing any key on the handset, except <MUTE>, <OFF>, and the <Vol> keys,will answer the call.If ringing is detected when the handset is non-idle (e.g. in the INTERCOM, PROGRAMMING, or MEMORYREVIEW mode, or dialling during the TALK mode), this feature is not available.On models equipped with the Voice Announce feature, if the incoming call has been intercepted by the PrivacyManager at the local telephone company (where available), the user is required to press “1” to access the PrivacyManager.3.11.3 Handset On-Cradle / Off-CradleDepending on the operating mode of the phone, replacing the handset on the base unit cradle or lifting the handsetoff the cradle may result in the phone changing to a different mode. In all cases, a key beep will be sounded at thehandset to indicate the change in the cradle status.< ►>ALL NAME-ONLYOFF< ►>DIRECTORY AREARINGER ANNOUNCE ALL NAME-ONLYOFF+ Handset confirmation beepALL NAME-ONLYOFF<SELECT><SELECT>TALK 0:02’11

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 55 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeHandset on-cradle during the TALK mode, the INTERCOM mode, or when the handset is paged is similar topressing <OFF>. The phone will change to the IDLE mode. On the other hand, when the handset goes on cradleduring the RINGING or handset HOLD mode, the phone will remain in the current operating mode.Handset off-cradle during the base SPEAKERPHONE or the base HOLD mode is similar to pressing <PHONE>.The phone will change to the handset TALK mode. On the other hand, when the handset goes off cradle during theRINGING mode, the phone will remain in the RINGING mode.3.11.4 Key BeepA key beep will be generated each time a key on the handset or base keypad is pressed. The beep provides audibleconfirmation for the key input. The only exception is the handset volume adjustment keys.A key beep will also be generated for non-keypad actions including handset on-cradle, handset off-cradle, andintercom termination.3.11.5 Line In Use IndicationDuring the IDLE mode, if an extension phone connected to the same telephone line goes off-hook, a LINE IN USEmessage will be displayed on the handset LCD. The message will remain on the display until the extension phonegoes back on-hook.3.11.6 Visual Message Waiting Indication (VMWI)The visual message waiting indication feature will notify a user who subscribes to voice mail at the local telephonecompany that there are messages available. Frequency shift-keying (FSK) signal (and optionally stutter dial tone)detection will be used to decode the VMWI signal transmitted by the telephone company. Upon detection of amessage waiting status from the CO, the Message LED on the base will be blink and MESSAGE WAITING will bedisplayed on the handset LCD.OptionIf the stutter dial tone detection option is available, the method of VMWI detection is initialised to use both FSK andstutter dial tone detection. However, once the phone detects the stutter dial tone, it will subsequently use only thismethod. The detection method can be explicitly re-initialised to again include FSK detection. The re-initialisationwill also occur after an AC power result.3.11.7 Handset Speakerphone (Option)The handset speakerphone can be used during the TALK or INTERCOM mode. The audio will be disconnectedfrom the earpiece receiver and mouthpiece microphone and redirected to the speakerphone.To activate the speakerphone via <SPKR>, the handset must already be in the TALK or INTERCOM mode(<SPKR> is not valid during the IDLE mode). While the speakerphone is engaged, other handset operations willremain the same as in the TALK or INTERCOM mode with the following additions:• <SPKR> during the handset SPEAKERPHONE mode will generate a hook flash• <PHONE> will disconnect the speakerphone and redirect the audio back to the earpiece receiver andmouthpiece microphone.• <OFF> will terminate the line or intercom connection, disengage the speakerphone, and return thephone to the IDLE mode.

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 56 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeThe handset Speakerphone LED will be on during operation in the handset SPEAKERPHONE mode.3.11.8 No Telephone Line ConnectedIf the phone is in the IDLE mode and detects there is no telephone line connected to the base unit, aCHECK TEL. LINE message will be displayed on the handset LCD to prompt the user to check the line connection tothe base unit.3.12 User Indication and Priority3.12.1 Status TonesName Description Tone Generated Priority SectionHandsetRinger • generated during incoming call• there are four types of ringer sounds (user-programmable)• ringer volume is user-programmable4 sec off, 2 sec on; repeat 2 3.4Paging • generated when base pages the handset 0.56 sec off, 0.56 sec on 1 3.6Busy • generated if base is in SPEAKERPHONE modewhen handset pages the base 2 kHz: 0.5 sec on, 0.5 sec off;repeat 5 times 33.6.2Key beep • generated whenever a key is pressed or whenhandset goes on or off cradle 2 kHz: 40 ms on 4 3.11.4Error beep • generated when an erroneous function isattempted or programming is aborted• key beep will be omitted when this tone is sent2 kHz: 50ms off, 50 ms on;repeat 5 times 3Confirmationbeep • generated a programming command iscompleted successfully 2 kHz: key beep + 0.5 sec off,0.5 sec on 33.8TALK 0:01’55SPEAKERPHONE0:01’56<SPKR> <PHONE> TALK 0:01’57<OFF><SPKR>SPEAKERPHONE0:01’57line flash

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 57 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeName Description Tone Generated Priority SectionOut of rangealert 1 • generated when out of range is first detected 2 kHz: 100 ms on, 900 ms off;repeat for 30 sec 15.4Out of rangealert 2 • generated after out of range alert 1 has beensent for 30 sec 2 kHz: 100 ms on, 400 ms off;repeat 30 sec 15.4Call waiting • announces an incoming call during TALK mode• generated at low volume level• this tone will interrupt other tones (previous tonewill continue after call waiting tone is completed)2 kHz: 250 ms off, 40 ms on,40 ms off, 40 ms on, 250 msoff23.3.1Low battery • generated when low battery condition is detectedon the handset (during non-IDLE mode) 2 kHz: 40 ms on, 3 sec off;repeat 5 times for each call oreach operation attempted56.2BaseRinger • generated during incoming call• only one type of ringer sound on base• ringer volume is adjusted by slide switch on base2 sec off, 4 sec on; repeat 2 3.4Paging • generated when handset pages the base 0.56 sec off, 0.56 sec on 1 3.6Busy • generated if base is in SPEAKERPHONE modewhen handset pages the base 2 kHz: 0.5 sec on, 0.5 sec off;repeat 5 times 33.6.2Key beep • generated whenever a key is pressed 2 kHz: 40 ms on 4 3.11.4Max/minvolume alert • generated when maximum or minimum volumesetting is reached when the setting is adjusted• key beep will be omitted when this tone is sent2 kHz: 50 ms off, 50 ms on;repeat 3 times 3Call waiting • announces an incoming call duringSPEAKERPHONE mode• sent at low volume level• this tone will interrupt other tones in progress(tone will be resumed after call waiting tone iscompleted)2 kHz: 250 ms off, 40 ms on,40 ms off, 40 ms on, 250 msoff23.6.43.12.2 LCD MessagesName Description Priority Section**RINGING** • displayed during incoming call 33.4TALK • displayed during handset TALK mode 43.3SPEAKERPHONE • displayed during handset SPEAKERPHONE mode 33.11.7MUTING • displayed when handset microphone is muted 32.1.2HOLD • displayed during (handset & base) HOLD mode 33.4.4BUSY • displayed if base is in SPEAKERPHONE mode when handset pagesthe base 23.6.2LINE IN USE • displayed when a parallel phone is off-hook 83.11.5**PAGING** • displayed when handset or base pages the other 23.6INTERCOM • displayed during INTERCOM mode 33.6OUT OF RANGE • displayed when handset out of range is detected 25.4BATTERY LOW • displayed when low battery on the handset is detected 56.2MESSAGE WAITING • displayed when VMWI signal from CO is detected 7 3.11.6CHECK TEL. LINE • displayed when the phone cannot detect a telephone line connected tothe base 83.11.8

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 58 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeName Description Priority SectionCHECK AC POWER • displayed when phone is operating in POTS mode 66.4NO AREA CODE • displayed when an operation requires access to the home area codeand no code has been configured for the phone 33.7MEMORY FULL • displayed when no additional new entries can be programmed into thehandset directory 33.8.1CHANNEL SEARCHING • displayed when handset is trying to re-establish connection with thebase 15.5FOUND CHANNEL x • displayed when handset successfully re-establishes connection withthe base on channel number “x” 25.5TRANSMISSION ERROR • displayed when error is detected in the CID data received from CO 33.73.12.3 LEDsName Description SectionHandsetSpeakerphone • on steady when handset speakerphone is engaged 3.11.7BaseIn Use • blinks quickly during RINGING mode (40 ms on, 40 ms off; repeat)• blinks slowly during handset HOLD mode (0.5 sec on, 0.5 sec off; repeat)• on steady when handset is in the TALK or SPEAKERPHONE mode3.4Charging • on steady when handset is resting in cradle and the handset battery ischarging 6.1Spare Battery • blinks when phone is operating in POTS mode (0.5 s on, 0.5 s off; repeat)• on steady when spare battery is installed in base6.3 &6.4New Call • blinks when there is new caller ID data to be reviewed on the handset (0.5 son, 0.5 s off; repeat) 3.4.2 &3.7.1Message • blinks when there is voice mail waiting from the CO (0.5 s on, 0.5 s off; repeat) 3.11.6Speakerphone • blinks during base HOLD mode (0.5 sec on, 0.5 sec off; repeat)• on steady during base SPEAKERPHONE mode3.4.4Intercom • blinks when paging (0.5 s on, 0.5 s off; repeat)• on steady during INTERCOM mode3.6Hold • on steady during base HOLD mode 3.5Mute • on steady when base microphone is muted 2.2.2

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 59 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice4 ITAD OperationThe PDLci MK3 provides an advanced, integrated telephone-answering device (ITAD) that employs ADPCMencoding of the voice messages. The answering device includes three (optionally four) mailboxes for storingincoming messages. The ITAD can be operated locally, using keys available on the base unit, or remotely, viaDTMF key inputs when calling in from another telephone.The ITAD provides storage for up to 18 minutes of recording of incoming messages and memos (with silencecompression) or 99 messages in total.With the exception of turning on the answering machine and accessing remote operation, all other functionsdescribed in the following subsections are available only when the ITAD has been activated. The main modes ofoperation for the ITAD include answering incoming calls, recording memos, reviewing stored messages, andconfiguring settings.When the ITAD is connected to an incoming call, various non-ITAD keys or events can cause the current answeringmachine function to terminate and the ITAD to release any connection to the telephone line:• If <PHONE> on the handset or <SPRK> on the base is pressed, the phone will go into the TALKmode.• If <INT.COM> on the handset is pressed (either to initiate an intercom, or in response to a page fromthe base), the phone will go into the INTERCOM mode.• If a parallel telephone set goes off-hook, the phone will go into the IDLE mode.For all remaining other ITAD functions, it will be possible for the phone to operate in the TALK (or handsetSPEAKERPHONE), handset HOLD, handset PROGRAM, or MEMORY REVIEW mode even when the ITAD isin-use. However, phone operations that involve the use of the base speakerphone will cause the answering machinefunction to terminate:• If <SPRK> on the base is pressed, the phone will go into the base SPEAKERPHONE mode.• If <INT.COM> on the handset is pressed (either to initiate an intercom, or in response to a page fromthe base), the phone will go into the INTERCOM mode.4.1 ITAD Local OperationA number of keys on the base unit are provided for local access to ITAD functions. These keys include:• <ANSWER ON/OFF>• <MEMO>• <MENU>• <SELECT>• <TIME/SET>• <MAILBOX #1>• <MAILBOX #2>• <MAILBOX #3>• <MAILBOX #4> (option)• <ERASE>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 60 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice• <REPEAT/SLOW>• <SKIP/QUICK>A <Mailbox> key refers to the key for any one of the three (optionally four) mailboxes - <MAILBOX #1>,<MAILBOX #2>, <MAILBOX #3> (or <MAILBOX #4>).Pressing a <Mailbox> key during any local ITAD operation will exit the current function. There is also a no-activitytimeout (20 seconds unless otherwise noted). In either case, a termination beep will be sounded to indicate currentoperation is terminated.4.1.1 Activating the Answering MachineAfter power up, the answering machine will be automatically turned on and is available to answer incoming calls. Itcan subsequently be deactivated and re-activated by the user. When the answering machine is off, all <ITAD> keyswill be ignored except for <ANSWER ON/OFF>.Activating the ITAD:Deactivating the ITAD:If the answering machine is turned on and configured to allow incoming messages but memory is full (see Section4.1.9.3), the ITAD will be deactivated automatically. In this case, the Answer LED will remain lit and the 7-segmentdisplay will indicate memory full by alternately blinking Fand the total number of new messages.4.1.2 Answering Incoming CallsWhen the ITAD is activated, an incoming call that has not been answered after a pre-determined number of rings willbe routed to the answering machine. The ITAD will answer the call and play an outgoing message (OGM) to greetthe caller. The answering machine can be configured to allow the caller to leave a message after the greeting, or justplay the announcement. For announce-only, the OGM will be played twice to ensure the caller does not miss themessage.There is a different OGM associated with normal and announce-only answering. Furthermore, the user can select tohave a personal greeting or use the standard (pre-recorded) greeting in each case. When there are no custom OGMthat has been recorded, the ITAD will use the default standard greeting.The standard greetings are:<ANSWER ON/OFF> Answeringmachine on+ Answer LED onITAD off<ANSWER ON/OFF> Answeringmachine off+ Answer LED offITAD on

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 61 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeDuring ringing period, all the <ITAD> keys except for <ANSWER ON/OFF> will be ignored. If the answeringmachine is turned on while the phone is in the RINGING mode, the ring counter that is used to determine when theITAD answers the call will start its count from the time the <ANSWER ON/OFF> key is pressed.While the OGM is being played, the user can answer the incoming call by pressing <PHONE> on the handset or<SPRK> on the base. The ITAD will terminate the announcement and the phone will go into the TALK mode.Alternatively, if a parallel telephone set goes off-hook, the announcement will also be terminated and the phone willgo into the IDLE mode.If another call is received (call-waiting signal detected) while the answering machine is recording an incomingmessage, the recording will continue and the first call will remain connected.Even when the answering machine is deactivated, it will answer an incoming call after ten rings. The ITAD willprovide a “Please enter your security code” announcement to allow access to remote ITAD operations.4.1.3 Privacy Screening (Option)The privacy screening feature allows the answering machine to intercept calls that come in from unknown orblocked callers. Only models equipped with four mailboxes may offer this optional feature. When this feature isenabled (and the ITAD is not set to announce-only answering), the phone uses the caller ID information todetermine which calls will be routed to the answering machine automatically. Since the CID information is receivedbetween the first and second rings, the phone will ring once before the call is answered by the ITAD. The caller willhear the pre-recorded privacy screening OGM as follows (this OGM is separate from the normal or announce-onlyOGM):If the caller leaves a message, it will be placed in mailbox #4.If the privacy screening option is not available or if the feature is disabled, operation of mailbox #4 (whereavailable) will be identical to the remaining three mailboxes.Hello, I'm unable to answeryour call right now. Pleaseleave your name, number andmessage after the tone.Hello, I'm unable to answeryour call right now. Pleasecall again. Thank you.default normal OGM default announce-only OGMYou are calling from a privateor unidentified phonenumber. Please leave amessage with your name &phone numberafter the tone.

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 62 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice4.1.4 Recording Incoming MessagesWhen the ITAD is enabled to allow the recording of incoming message, the caller can begin recording after theOGM and the start-of-recording alert. Unless otherwise directed by the caller, the message will be stored in mailbox#1. The caller can select a different mailbox (i.e. mailbox #2 or #3) by entering “*2” or “*3” (DTMF only) at theremote telephone during the OGM playback.Recording will be terminated when one of the following is detected:• silence in excess of six (6) seconds• three (3) consecutive busy tones or continuous busy tone for five (5) seconds from the telephone line• “*0” (DTMF tone) from the telephone line• <PHONE> on handset or <SPRK> on base is pressed• a parallel telephone set goes off-hookThe maximum allowable length of an incoming message is four (4) minutes. If the maximum length is reached or ifmemory becomes full during recording, recording will also be terminated automatically.Extended period of silence at the end of the recording will be removed in the stored message. If the incomingmessage is less than two seconds long, it will not be regarded as a valid message. Otherwise, it will be stored intomemory along with a time- and day-stamp and the appropriate ITAD message counters (i.e., the total number ofmessages in all the mailboxes and the number of new messages in the selected mailbox) will be incremented by one.The updated number of messages will be indicated on the 7-segment display.When the recording is terminated, the ITAD will release the telephone line connection. The phone will stay off-hookand go into the TALK mode if the user has pressed the <PHONE> or <SPRK> key to intercept the call; in all othercases, the phone will go into the IDLE mode.4.1.5 Call-ScreeningWhen the ITAD answers a call and call-screening is enabled, the user will be able to hear the voices (to and from thecaller) on the base speakerphone (assuming the volume level is sufficient loud). The user can choose to talk to thecaller anytime after the ITAD has answered the call by one of the following: pressing <PHONE> on the handset,removing the handset from the cradle, pressing <SPKR> on the base, or picking up an extension phone. The ITADwill halt its operation and release its connection to the line (the handset, base or extension phone that has picked upthe call will be connected instead). If the ITAD has been recording an incoming message, it will stop recordingimmediately but the message will still be stored into the mailbox.start-of-recordingalert“*2”or“*3”< 4 minutesNormal OGMMailbox 2 (3),now recordingRecording incomingmessage

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 63 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice4.1.6 Recording MemosThe user records the memo by speaking into the microphone in the base unit. During the recording, the 7-segmentdisplay will indicate the recording time in seconds. When the duration exceeds 99 seconds, the display will flash 99.There is no silence detection during memo recording. The recording will be terminated only when the user presses a<Mailbox> key or when the length of the memo reaches four (4) minutes. If memory becomes full during recording,recording will also be terminated automaticallyIf the memo is less than two seconds long, it will not be regarded as a valid message. Otherwise, it will be storedinto memory along with a time-and day-stamp and the appropriate ITAD message counters (i.e., the total number ofmessages in all the mailboxes and the number of new messages in the selected mailbox) will be incremented by one.The updated number of messages will be indicated on the 7-segment display.4.1.7 Reviewing Messages / MemosWhen the ITAD is not actively engaged in an operation (e.g. playing OGM, recording incoming message or memo,or changing configuration), the 7-segment display will blink a count to indicate the total number of new messagesand memos stored in the answering machine. (The display will indicate a steady 0if there are no new messages inany mailboxes.) All messages stored (new or old) can be reviewed by selecting to play back messages in a mailbox.At the start of recording playback, the ITAD will announce the number of messages available in the selectedmailbox. Generally, only the new messages in the mailbox will be played during message review. However, if thereare no new messages in the mailbox, the ITAD will play back the old messages. A message will be considered oldafter it has been reviewed (played back completely or if it has been skipped through by the user deliberately). Theplayback sequence for the messages will be first-in-first-out (FIFO). During playback, the 7-segment display willindicate the number of the current message. The count display will blink if the message is new, or it will be onsteady otherwise. A start-of-recording alert will sound prior to the start of each message, while the time- and day-stamp that indicates the time of recording will be announced at the end of each message.Mailbox with new messages only:<MEMO>start-of-recordingalert< 4 minutesPlease selectmailbox Now recording recording memo< Mailbox>playback completeor<SKIP>Mailbox 1. You have 3new messages<MAILBOX 1>End of messagesplaying backnew message #1 playing backnew message #2playing backnew message #3playback completeor<SKIP>playback completeor<SKIP>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 64 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeMailbox with new and old messages:Mailbox with old messages only:The <SKIP> and <REPEAT> keys can be used to skip forward and backwards, respectively, within the messagesequence during playback. Pressing <SKIP> will jump to the start of the next message. Pressing <REPEAT> withinthe first two seconds of a message will replay the previous message; otherwise, the current message will be replayed.Pressing a <Mailbox> key during playback will exit before all messages in the mailboxes have been reviewed. Atermination beep will be sounded to indicate review has been terminated.At the end of message review (“End of Messages” announcement), if the ITAD has less than five minutes ofrecording time available, it will alert the user to the actual time remaining. The time will be rounded to the nextlowest minute, or seconds if there is less than one minute (e.g. “Remaining recording time is 3 minutes”).4.1.8 Deleting MessagesMessages can be deleted after they have been reviewed. The current message can be deleted by pressing <ERASE>at any point during the playback. If there are no new messages in a mailbox, the user is provided with the option todelete all the messages in that mailbox. Otherwise, only the current message being played back can be erased.Erasing a single message:playback completeor<SKIP>Mailbox 1. You have 3old messages<MAILBOX 1>End of messagesplaying backold message #1 playing backold message #2playing backold message #3playback completeor<SKIP>playback completeor<SKIP>playback completeor<SKIP>Mailbox 1. You have 3 newmessages & 1 old message<MAILBOX 1>End of messagesplaying backnew message #1 playing backnew message #2playing backnew message #3playback completeor<SKIP>playback completeor<SKIP>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 65 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeErasing all messages in a mailbox:After messages have been deleted, the appropriate ITAD message counters (i.e., the total number of messages in allthe mailboxes and the number of old messages in the affected mailbox) will be decremented accordingly. Theupdated number of messages will be indicated on the 7-segment display.4.1.9 Special Features4.1.9.1 Audible Message AlertWhen the ITAD is enabled and audible-message alert is enabled, the ITAD will provide a periodic message alert (anaudible beep every ten seconds) whenever there are new messages present in any of the mailboxes. If the userpresses an <ITAD> key while the alert is on, all future alerts for the current message will be suppressed. Themessage alert will resume when another new message is received. In addition, when the phone is operating in thebase SPEAKERPHONE mode, the alert will also be disabled temporally.4.1.9.2 Variable Playback SpeedThe ITAD provides the capability to adjust playback speed during message review. While a message is being playedback, pressing and holding the <QUICK> or <SLOW> key will change the playback speed accordingly. At thehigher speed, playback will be at 200% of the normal rate while at the slower speed, playback will be at 50% of thenormal rate. The playback will remain at the adjusted speed for the duration of the key pressed (minimum is onesecond). Normal playback speed will resume after the key is released.4.1.9.3 Memory FullIf the remaining recording time available is less than 30 seconds or the total number of messages in all the mailboxesexceeds 99, the ITAD will provide a memory-full indication on the 7-segment display by alternating between F andthe number of new messages. No incoming messages or memos can be recorded until existing messages are deleted.If a user attempts to record a memo, the ITAD will provide a “Memory full” warning.When memory is full, the answering machine will be automatically deactivated. In this case, it will answer anincoming call after ten rings with a “Memory full. Please enter your security code” announcement.<ERASE> Please selectmailbox<MAILBOX x> All old messageshave been erasedhold≥ 2 sectermination beep<ERASE> Message has beenerasedno moremessages inmailbox<Mailbox> End of messagesplaying backmessagetermination beep

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 66 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeThe memory-full condition in the answering machine will be maintained until a sufficient number of messages havebeen deleted to provide a minimum of 30 seconds of recording time.4.1.9.4 Day and Time AnnouncementWhen the answering machine is idle and the <TIME> key is pressed, the current setting for the day of the week andtime of the day will be announced.4.1.10 Configuring the ITADThe ITAD provides a number of parameters that can be set by the user to customise its configuration. They include• personalised greetings (normal and announce-only OGM)• security code for remote ITAD operation• audible message alert enable/disable• day of the week and time• announce-only enable/disable• call-screening enable/disable• number of rings to wait before ITAD answers a call.• privacy-screen enable/disable (option)All parameters are set to a default value from the factory (see Section 7.9 for factory settings). User can choose tomodify one or more settings by using the <MENU> key (pressing this key repeatedly will access the differentparameters in turn). To facilitate the configuration process, the ITAD provides a menu that includes voice promptsto guide the user through the programming sequence. In addition, after each configuration change, a voice indicationwill also be provided to confirm the new setting.Once <MENU> is pressed to invoke the configuration menu, the ITAD will continue to cycle through each parametersetting with repeated pressing of the <MENU> key. Any parameters that have been modified via <SET> during theprocess will be stored . The ITAD will exit the configuration menu with a termination beep when a <Mailbox> key<MENU> Set outgoingmessage Set security code<MENU> Set audiblemessage alert<MENU>Set number ofrings Set call-screening<MENU> Set announce-only<MENU><MENU>Set day and time<MENU><MENU>Set privacyscreening<MENU>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 67 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeis pressed (this also applies when a <Mailbox> key is pressed as part of setting the outgoing message). There is alsoa no-activity timeout (one minute during day and time setting, 20 seconds otherwise) after which the ITAD will exitthe configuration menu automatically.4.1.10.1 Personal GreetingsPersonal greetings can be recorded to replace the standard OGM for both normal and announce-only answering. Theanswering mode that is currently set for the ITAD will determine which greeting will be recorded during ITADconfiguration: if announce-only is enabled, the user will be able to record the announce-only greeting and ifannounce-only is disabled, the user will be able to record the normal greeting.4.1.10.2 Security CodeOutgoing messagehas been erased<ERASE>start-of-recordingalert<MENU> Set outgoingmessage<MENU> Now recording<RECORD><Mailbox>. . .termination beep< 90 secrecording OGMplaying back OGM<Mailbox>termination beep

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 68 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice4.1.10.3 Audible Message AlertWhen <SELECT> is pressed repeatedly during audible message alert configuration, the menu will cycle through theavailable options: on → off → on (the first option presented is always the current setting). While the options areannounced, the 7-segment LED display will also indicate the corresponding values (0N, or 0F).4.1.10.4 Day and TimeThe ITAD maintains day-of-the-week and time-of-the-day settings that are used for time-stamping incomingmessages and memos. The settings will need to be set upon initial power-up or after a power interruption (the 7-segment display will indicate (L).<MENU> Set audiblemessage alert<MENU> Audible messagealert is on<SET>Audible messagealert is off<Mailbox>Off<SET><SELECT>On<SELECT>. . .termination beep<SELECT><SELECT><MENU> Set security code<MENU> Security code is 19<SET>Security code is 33 <Mailbox>33<SET><SELECT>19<SELECT>. . .termination beep<SELECT>. . .

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 69 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeWhen <SELECT> is pressed repeatedly during time and day configuration, the menu will first cycle through the day-of-the-week options: Monday → Tuesday → … → Sunday → Monday. After a day is selected, the menu will cyclethrough the hour-of-the-day options: 1 AM → 2 AM → … → 11 AM → 12 PM → 1 PM → … → 12 AM → 1 AM.Finally, after an hour has been selected, the menu will cycle through the minute-of-the-hour options (00 → 01 → …→ 59 → 00). In all cases, the first option presented in the menu is always the current setting. While the options areannounced, the 7-segment LED display will also indicate the corresponding values.4.1.10.5 Announce-Only<MENU> Set day and time<MENU> Monday, 1:28 PM<SET>Friday<Mailbox>1 PM<SET><SELECT>Monday<SELECT>. . .termination beep<SELECT>. . .<SELECT>Friday, 9:05 AM9 AM. . .<SELECT> <SELECT>05<SET><SET>28<SELECT>. . .<SELECT>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 70 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeWhen <SELECT> is pressed repeatedly during announce-only configuration, the menu will cycle through theavailable options: on → off → on (the first setting presented is always the current configuration). While the optionsare announced, the 7-segment LED display will also indicate the corresponding values (0N, or 0F).4.1.10.6 Call-ScreeningWhen <SELECT> is pressed repeatedly during call-screening configuration, the menu will cycle through theavailable options: on → off → on (the first setting presented is always the current configuration). While the settingsare options, the 7-segment LED display will also indicate the corresponding values (0N, or 0F).4.1.10.7 Number of RingsThe ITAD can be configured to answer an incoming call after two, four or six rings. In addition, a toll-saver settingis available whereby an incoming call will be answered after two rings only if there are new messages/memos storedin the ITAD, or four rings otherwise. The toll-saver feature is provided to help user avoid long distance chargeswhen retrieving messages remotely (see Section 4.2.1) by allowing the user to hang up quickly when the ITAD doesnot answer the call on the second ring (i.e. no new messages).<MENU> Set announce-only<MENU> Announce-only is on<SET>Announce-only isoff<Mailbox>Off<SET><SELECT>On<SELECT>. . .termination beep<SELECT><MENU> Set call-screening<MENU> Call-screening is on<SET>Call-screening isoff<Mailbox>Off<SET><SELECT>On<SELECT>. . .termination beep<SELECT>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 71 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice When <SELECT> is pressed repeatedly during number of rings configuration, the menu will cycle through theavailable options: 2 → 4 → 6 → toll saver → 2 (the first setting presented is always the current configuration).While the settings are announced, the 7-segment LED display will also indicate the corresponding values (2, 4, 6, orTS).4.1.10.8 Privacy-Screening (Option)When <SELECT> is pressed repeatedly during privacy-screening configuration, the menu will cycle through theavailable options: on → off → on (the first setting presented is always the current configuration). While thesettings are options, the 7-segment LED display will also indicate the corresponding values (0N, or 0F).4.2 Remote Operation of ITADRemote ITAD operation provides the capability to control many of the functions of the answering machine bydialling in from another telephone. The user must call in from a telephone connected to a different phone line (i.e.<MENU> Set number ofrings<MENU> Number of ringsselected is six<SET>Number of ringsselected is two<Mailbox>Two<SET><SELECT>Toll-saver<SELECT>. . .termination beep<SELECT><MENU> Set call-screening<MENU> Call-screening is on<SET>Call-screening isoff<Mailbox>Off<SET><SELECT>On<SELECT>. . .termination beep<SELECT>

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 72 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticenot an extension phone that is on the same line as the PDLci MK3). In addition, the calling telephone must supporttouch-tone signalling in order to transmit he DTMF tones required to access the various options.The functions that are available via remote operations include activating/deactivating the answering machine,reviewing (and deleting) messages, recording memo, and modifying personal greetings.During remote operation, entering "*0" on the touch-tone keypad of the remote telephone or pressing a <Mailbox>key on the base unit will terminate the current operation and the ITAD will disconnect the line. The ITAD will alsoexit remote operation and hang up after a 20-second, no-activity timeout.4.2.1 Accessing Remote OperationTo access the ITAD operations available from a remote telephone, the user must call in and dial the correct securitycode when the ITAD answers the call and plays the appropriate greeting or prompt.When the “#” key is dialled during the announcement, the announcement will be muted for two seconds to allow thecaller to dial the two-digit security code. It will also be possible to enter the security code during the recording of anincoming message. In this case, the caller must dial the “#” key to interrupt the recording and dial the security code.The recording will be stopped after a valid security code has been entered, and the recorded incomplete message willbe deleted.The ITAD will disconnect the line automatically after three attempts to dial the correct security code have failed(dialling a single "#" will not be regarded as an error entry). If “#*”, “*#”, “##” or “**” is entered, the first digit isignored. The two-second muting time will be counted from the second key.4.2.2 Voice Menu for Remote ControlThe ITAD provides two pre-recorded voice menus to help the user navigate the remote operation options. A simplevoice menu list the key sequence for accessing the most commonly used operations, while an advance voice menu isavailable to list the key sequence for the remaining operations available. The simple voice menu will be played ineight seconds after the caller has entered a valid security code and the ITAD announced the number of new messagesor anytime the caller dials “*5”. The ITAD will change to play the advance menu if “*5” is pressed (again) duringthe simple voice menu.Hello, I’m unable toanswer your call …2/4/6 rings“#”entersecurity codeYou have 2 newmessages8-second delayor“*5”call toITADOGM mutedITADvoice menuPlease enter yoursecurity code10 ringsITAD offITAD onconfirmation beep

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 73 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeSimple voice menu:Advance voice menu:While the voice menu is being played, dialling any function key sequence will interrupt the voice menu and causesthe ITAD to perform the associated function immediately.4.2.3 Activating the Answering MachineActivating the ITAD:Deactivating the ITAD:Press "#1" to play mailbox 1Press "#2" to play mailbox 2Press "#3" to play mailbox 3Press "#8" to play mailbox 4Press "#5" to stopPress "#4" to repeat the messagePress "#6" to skip the messagePress "#9" to erase the messagePress "*5" for other functionsPress "#7" to review outgoing messagePress "*7" to record outgoing messagePress "*8" to record memoPress "#4" twice to repeat previousmessagePress "#0" to turn the system on or offPress "*5" for other functionsPress "#6" to skip the messagePress "#9" to erase the messagePress "*5" for other functions“#0”Answeringmachine on+ Answer LED onITAD off

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 74 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice4.2.4 Recording MemosThe maximum length of the memo is four (4) minutes. If memory becomes full during recording, recording will beterminated automatically.If the memo is less than two seconds long, it will not be regarded as a valid message. Otherwise, it will be storedinto memory along with a time-and day-stamp and the appropriate ITAD message counters (i.e., the total number ofmessages in all the mailboxes and the number of new messages in the selected mailbox) will be incremented by one.The updated number of messages will be indicated on the 7-segment display.If memory is already full or the total number of messages is 99 when “*8” is dialled, no new memos will be accepted.In that case, the ITAD will provide a "Memory full" announcement.4.2.5 Reviewing MessagesThe caller can select to review the messages in a desired mailbox by dialling the function key sequence thatcorresponds to the desired mailbox (“#1”, “#2”, and “#3” for mailboxes 1, 2 and 3 respectively; “#8” can be used toaccess mailbox 4 where the privacy screening option is available). At the start of recording playback, the ITAD willannounce the number of messages available in the selected mailbox. Generally, only the new messages in themailbox will be played during message review. However, if there are no new messages in the mailbox, the ITAD willplay back the old messages. A message will be considered old after it has been reviewed (played back completely orif it has been skipped through by the user deliberately). The playback sequence for the messages will be first-in-first-out (FIFO). The time- and day-stamp that indicates the time of recording will be announced at the end of eachmessage.Mailbox with new messages only:“#0”Answeringmachine off+ Answer LED offITAD on4 minutesor*5”“*8”start-of-recordingalertPlease selectmailbox Now recording recording memo“1”pr2 pr3recordingcompleted

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 75 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeMailbox with new and old messages:Mailbox with old messages only:The function key sequences “#6” and “#4” can be used to skip forward and backwards, respectively, within themessage sequence during playback. Dialling “#6” will jump to the start of the next message. Dialling “#4” withinthe first two seconds of a message will replay the previous message; otherwise, the current message will be replayed.playback completeor“#6”You have 3 newmessages“#1”or “#2”or “#3”End of messagesplaying backnew message #1 playing backnew message #2playing backnew message #3playback completeor“#6”playback completeor“#6”playback completeor“#6”You have 3 new messages& 1 old messageEnd of messagesplaying backnew message #1 playing backnew message #2playing backnew message #3playback completeor“#6”playback completeor“#6”“#1”or “#2”or “#3”playback completeor“#6”You have 3 oldmessages“#1”or “#2”or “#3”End of messagesplaying backold message #1 playing backold message #2playing backold message #3playback completeor“#6”playback completeor“#6”

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 76 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeDialling “#5” during playback will exit before all messages in the mailboxes have been reviewed. A terminationbeep will be sounded to indicate review has been terminated.Playback will be muted if “#” or “*” is dialled during message review. During this time, the ITAD will wait foradditional digits dialled to complete a function key sequence. The ITAD will resume playback if no additional digitis dialled after a two-second timeout.4.2.6 Deleting MessagesMessages can be deleted after they have been reviewed. The current message can be deleted by dialling the “#9” keysequence at any point during the playback.4.2.7 Modifying & Confirming GreetingsChanging OGM:Reviewing OGM:4.3 User Indication and Priority4.3.1 Seven-Segment LED DisplayLED Display Description Priority Section0steady • indicates no new messages in any mailbox 4.1.71.. 98 blinking • indicates total number of new messages in allmailboxes• available when ITAD is on or off4.1.70.. 99 alternating • indicates memory full or total number of messages 4.1.9.3<ERASE> Message has beenerasedno moremessages inmailbox End of messagesplaying backmessage“#1”or “#2”or “#3”90 secor*5”“*7”start-of-recordingalertNow recording recording OGM recordingcompletedtermination beep“#7”playing back OGM

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 77 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeLED Display Description Priority Section& Fexceeds 99• number displayed corresponds to the number ofnew messages1.. 99 counting • indicates recording duration in seconds duringOGM/memo recording 4.1.10.1& 4.1.699 blinking • indicates recording time has exceeded 99 seconds 4.1.10.1& 4.1.61.. 99 on steady • indicates current message number in selectedmailbox during message playback 4.1.700 .. 99 steady • indicates current security code during remoteaccess code configuration4.1.10.2Asteady • indicates ITAD is set for announcement only 4.1.20N or 0F on for 1 sec • indicates when feature is enabled or disabled duringITAD configuration 4.1.10[L alternating withnormal display • indicates clock needs to be reset after power failure 6.5-- steady • indicates an incoming call is being answered orbase speakerphone is in-use 4.1.2-- blinking • indicates programming of ITAD menu items inprogress 4.1.102, 4, 6 orTS• indicates number of rings during ITAD configuration 4.1.10.74.3.2 Audible Status IndicationMessage Description Priority SectionAnsweringmachine on• Announced when ITAD is activated 4.1.1Answeringmachine off• Announced when ITAD is deactivated 4.1.1Memory full • Announced if memory is full when recording ofnew messages/memos is attempted 4.1.9.3End of messages • Announced when all messages (new or old, asappropriate) in the selected mailbox has beenplayed4.1.7Remainingrecording time isxx minutes/seconds• Announced at the end of message review whenthe amount of recording time remaining is lessthan 5 minutes4.1.74.3.3 Status TonesName Description Tone Generated SectionKey beep • generated whenever a valid key is pressed• sent prior to voice prompt2 kHz: 40 ms onTermination beep • generated a programming command iscompleted successfully or redial is erased 2 kHz: key beep + 0.5 sec off,0.5 sec on

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 78 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeName Description Tone Generated SectionStart-of-recordingalert • generated to signify start of recording 2 kHz: 1 sec on 4.1.4,4.1.6 &4.1.7Message alert • generated when there are new messages andthe audible message alert feature is enabled 4.1.9.14.3.4 LEDsName Description SectionAnswer • on steady when answering machine is on 4.1.1Mailbox #1 • blinks when there are new messages stored in mailbox #1• on steady when there are old messages stored in mailbox #14.1.7Mailbox #2 • blinks when there are new messages stored in mailbox #2• on steady when there are old messages stored in mailbox #24.1.7Mailbox #3 • blinks when there are new messages stored in mailbox #3• on steady when there are old messages stored in mailbox #34.1.7Mailbox #4 • blinks when there are new messages stored in mailbox #4• on steady when there are old messages stored in mailbox #44.1.7

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 79 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice5 RF Link OperationThe radio frequency (RF) link is a full-duplex communication path between the PDLci MK3 base and the handsetunits. It is used to transfer both audio (voice) and data between the base and handset. There are a total of 30 RFchannels available for communication. Only one channel may be selected as the active channel at any instant, thoughthere are provisions to select to a different active channel when there are perceived interference on the currentchannel.5.1 RF Link DataData is transmitted over the RF link between the handset and the base unit in packets. A fixed frame format is usedto provide for the simultaneous transmission of three logical channels – voice, control and frame synchronisationdata. The voice channel contains analog voice signals that have been are digitised using 32 kbps ADPCM dataencoding; the control data are generally operational commands from the base to handset and vice-versa; and theframe synchronisation data facilitates reception of the packet over the RF link. For improved security, the voice andcontrol data is scrambled prior to transmission; descrambling must be done at the receiving end prior to furtherprocessing of the voice and control data.When the phone is in the IDLE mode, the base and handset will listen for data transmission from the other relating tothe initiation of the PHONE, RINGING, PROGRAM or INTERCOM mode. If the handset is away from the cradle,the handset will be in the power-conservation mode of operation, in which the on-board electronics are essentially“asleep” but will wake up periodically to check for incoming data transmitted from the base. The handset will detectcommands sent from the base within one (1) second (maximum ringing delay), while the base will detect commandssent from the handset within 200 ms (maximum on/off-hook delay).5.2 Security CodeAll data communication over the RF link will include a security code as required by FCC Part 15. When a frame isreceived over the RF link, the security code is contained in the packet (part of the control channel) will be verifiedbefore any data is processed. This prevents the handset from receiving commands from another base unit and vice-versa.The handset and base units will use an identical, 24-bit security code that is factory-configured. The security code isstored in the non-volatile memory on both units and cannot be modified by the user.5.3 RF Channel SelectionIn order for the handset and base unit to communicate over the RF link, the selection of the active channel must besynchronised between the two units. An active channel is initially selected during the PDLci MK3 initialisationprocess. If the RF link subsequently degrades during operation, recovery involves the selection of a newcommunication channel that is automatically initiated and no user-intervention will be required.Regardless of the phone’s operating mode, both the handset and base units are constantly monitoring the quality ofthe active communication channel. Even when the handset is in power-conservation mode, the base is periodicallytransmitting link-status messages to the handset to verify the integrity of the RF link. The handset will also respondperiodically to the link-status message to provide feedback to the base unit.When the link is operational, the assessment of the channel quality is done based on the error rate detected on theincoming frames. While the voice channel is transparent, the control channel includes an error control mechanism.

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 80 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeIf the error rate of the incoming data is beyond an acceptable threshold, either the handset or the base canindependently initiate a channel change.The best channel out of the remaining 29 channels will be selected as the new channel. (If no improved channel canbe identified, the units will remain on the existing active channel and scanning for a new channel will begin againafter a brief delay.) If a new channel is selected and a link can be maintained in spite of a degraded link condition,the change to a new channel will occur in a co-ordinated manner. Otherwise, the handset and base unit will attemptthe link recovery procedure.5.4 Handset Out of Range DetectionWhen the RF link is broken between the handset and the base, the handset will provide both a visual and audiblealert. The audible alert consists of two separate alarm tones, and each will be sounded for 30 seconds for totalduration of 60 seconds. The LCD will continue to display the OUT OF RANGE message until either the RF link isre-established or the battery becomes dead.If the handset was in the TALK mode when out-of-range was detected, and the link is re-established during thesounding of the alarm (i.e. within 60 seconds), the handset will resume in the TALK mode and the conversation willbe continued. Otherwise, the line will be dropped and the phone will return to the IDLE mode.5.5 Link RecoveryThe RF link between the handset and base can be broken because the handset has gone out-of-range or because ofthe active channel selection at the handset and base are out of synchronisation. In either case, the units will attemptto re-establish communication with each other. The base unit will continuously transmit packets on the differentchannels while the handset scans all the channels for an incoming packet from the base. To prevent a deadlockcondition, the rates with which the units cycle through the channels are different between the handset and the base.With the handset scanning at a significantly faster rate than the base, the handset will have multiple chances ofreceiving the base transmission and responding to it before the base changes to transmit on another channel.During the link recovery procedure, the LCD will continuously display the CHANNEL SEARCHING message. Whenthe link is re-established successfully, the LCD will display the FOUND CHANNEL x message for five (5) seconds,where “x” identifies the (newly selected) active channel.detectout-of-range+ Handset Out-of-Range alarm 1OUT OF RANGE OUT OF RANGEOUT OF RANGE 30 sec+ Handset Out-of-Range alarm 2 + Handset error beep30 sec

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 81 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice6 Power ManagementThe PDLci MK3 is powered by a battery pack in the handset and by AC power (primary) or battery pack (backup) inthe base unit.6.1 BatteryThe handset operates from a three-cell, 600 mAh battery pack which is rechargeable. There are no connectorsattached to the battery pack. When fully charged, the battery will provide a minimum of seven (7) hours of operationin the TALK mode, three (3) hours of operation in handset SPEAKERPHONE mode, or seven (7) days of operationin the IDLE mode before requiring recharge. The battery pack will recharge automatically whenever the handset isplaced in the cradle of the base unit. (The Charge LED will lit to indicate the battery is being charged.) In addition,the battery pack can also be recharged via a compatible remote charger.6.2 Low Battery IndicationThe phone will provide both audible and visual warning when low battery condition in the handset is detected. Whenthe handset determines that the battery is running low, the LCD will display the icon. In addition, the LCDwill display a BATTERY LOW message for fifteen (15) seconds and an audible alert will be made if the handset is ina non-IDLE mode. The low battery alarm will be repeated every three (3) seconds for up to five times during theactive call or operation. The user may press any key during the fifteen-second alarm interval to suppress the messagedisplay and audible alert. Except for the continued display of the low-battery icon, the remaining low-batteryindication will not be repeated until the phone goes off-hook or begins another operation after returning to the IDLEstate.6.3 Spare Battery ChargerThe PDLci MK3 is equipped with a separate battery charger in the base unit that can be used to charge a sparebattery pack (optionally purchased). The Spare Battery LED will illuminate when a battery pack is placed in thecharger. The spare battery pack can also be used as backup power source for the base unit, as described in Section6.4.6.4 POTS Mode OperationThe PDLci MK3 provides a mode of operation that emulates a plain old telephone set (POTS). It allows the baseunit to maintain operation during AC power outages or any situation where the AC power is removed from the baseunit when there is a charged battery installed in the spare battery compartment.To indicate the phone is operating in POTS mode, the handset LCD will display a CHECK AC POWER message andthe base Spare Battery LED will blink.+ Handset low battery alarmdetect low batteryTALK 0:03’45 BATTERY LOW

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 82 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeDuring POTS mode operation, all handset functions will be available during except for intercom with the base, butall base speakerphone and ITAD functions will be inhibited:• If the handset has been active on a call, it will remain connected to the line.• If the base has been active on a call, it will be disconnected; the call will be dropped unless the handsethas previously been in a three-way conference.• If the call has been placed on hold by the base, the call will remain on hold and the handset can releasethe hold to pick up the call.• If an intercom has been set up between the handset and base, the intercom will be terminated.The phone will have no audible or visual indication when a low battery condition is detected on the spare batteryduring POTS mode operation.6.5 Power InterruptionEither the handset or base unit may occasionally suffer from power interruption during operation. The handsetpower supply may be interrupted if the battery is physically removed from the compartment. Alternatively, thehandset battery may be completely drained of its charges. In the base unit, the power supply is interrupted when ACpower is unavailable.In either case, the PDLci MK3 provides the capability to recover from the power interruption. Operation in thehandset SPEAKERPHONE or TALK mode will be maintained through a brief power interruption (up to 125 ms induration) to the base unit. In all other instances, the affected unit will be reset to allow the handset and base unit tore-establish RF communication and resume operation in the IDLE mode. The critical information that must beavailable to allow quick restoration of RF communication is the security code and the last active RF channel. Onboth the handset and base unit, this information will be restored directly from non-volatile memory.All directory entries, redial information, caller ID log and area code(s) configuration will be retained through apower interruption to the handset. However, the ringer type, volume, and receiver volume settings will be reset tothe default values when the power resumes. Similarly, the speakerphone volume setting will be reset after a powerinterruption to the base unit.For the ITAD, all messages in the mailboxes, user-recorded announcements as well as configuration for theanswering machine will be retained through a power interruption. After the power resumes, the ITAD will have abrief initialisation period (the -- indication will flash on the 7-segment display) before normal ITAD operation canresume (phone operation is available during this time). In addition, the real time clock will need to be reset by theuser (the [L indication will show on the 7-segment display to remind the user).

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 83 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice7 Electrical SpecificationsThis section contains the electrical specifications of the PDLci MK3. The specifications as stated are guaranteed atroom temperature.The specifications are validated via automated production test equipment (ATE) or manual testing, both inaccordance with VTECH‘s standard test set-up and procedure for each parameter. Parameters verified by the ATE(marked with *) are tested on every production unit at the board-level or final test stations. To protect againstvariation in the test equipment and allow for performance drift over time, the test limits for the ATE may be morerestricted than the range specified here. The remaining parameters are confirmed during design validation orregulatory certification and re-verified with testing on random samples.7.1 Operating ConditionsParameter Min Typ Max Units7.1.1 Operating Temperature Range 0 251402°C7.1.2 Base Unit Operating Voltage (AC Voltage, 60Hz) 96 1201144 Vrms7.1.3 Base Unit Operating Voltage (AC Adapter Output) 91Vdc7.1.4 Handset Operating Voltage33.2 3.614.2 VdcNotes: 1. Typical value represents the nominal testing value2. Handset battery should not be operated above 40°C3. Handset operates from a 3-cell NiCd battery7.2 DC Electrical CharacteristicsParameter Min Typ Max Units7.2.1 Handset Standby Time 7 Days7.2.2 Handset Continuous Talk Time (no speakerphone) 7 Hours7.2.3 Handset Speakerphone Continuous Talk Time 3 Hours7.2.4 Handset Talk Time - low battery detection to shutdown 15 Minutes7.2.5 Base Unit Standby Time – POTS Mode 5 Hours7.2.6 Base Unit Continuous Talk Time – POTS Mode 4 Hours7.2.7 Handset Battery Charge Time116 Hours7.2.8 Spare Battery Charge Time 24 HoursNotes: 1. Contact charging

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 84 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice7.3 Audio SpecificationsParameter Min Typ Max Units7.3.1 *Transmit Objective Loudness Rating (TOLR) @ 0 kft1,2 -40 -46 -53 dB7.3.2 *Receive Objective Loudness Rating (ROLR) @ 0 kft 1,2 51 46 41 dB7.3.3 *Sidetone Objective Loudness Rating (SOLR) @ 0 kft 1,3 19 8 3 dB7.3.4 *Receive Volume Adjustment Range 12 dB7.3.5 *Transmit Direction Acoustic Overload (into microphone)4103 dBspl7.3.6 *Receive Direction Acoustic Overload (from receiver)4103 dBspl7.3.7 Transmit Direction Noise520 dBrnC7.3.8 Peak Acoustic Pressure6130 dBsplNotes: 1. Tested using 0 kft of simulated telephone line2. Tested at normal (low) volume level3. Base unit connected to 0 kft of simulated telephone line terminated with 900 Ω4. Acoustic level that results in 5% THD, measured at 1 kHz through a C-message filter5. Handset isolated from sound input and mechanical disturbances6. Tested at high volume level7.4 Telephone Line Interface SpecificationsParameter Min Typ Max Units7.4.1 *DTMF Frequency Tolerance -1.5 +1.5 %7.4.2 *DTMF Low Group Tone Level1-7.5 -5.0 -4.0 dBm7.4.3 *DTMF High Group Tone Level1-5.5 -3.0 -2.0 dBm7.4.4 DTMF Combined Tone Level1+2.0 dBm7.4.5 DTMF High Group Pre-emphasis (Twist) 2.0 4.0 dB7.4.6 Pulse Dialling Break Duration260 ms7.4.7 Pulse Dialling Make Duration240 ms7.4.8 Pulse Dialling Rate 10 pps7.4.9 Hook Switch Flash Duration2650 ms7.4.10 Ring Detection Frequency3,4 15 68 Hz7.4.11 Ring Response Voltage440 Vrms7.4.12 Ring No-Response Voltage525 VrmsNotes: 1. Measured across a 900 Ω terminating impedance2. Value can be changed via EEPROM setting (typical value shown is default setting)3. The ringer must ring with signals within this range4. Measured with a frequency of 20 Hz

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 85 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice5. The ringer must not ring with signals within this range7.5 Calling Line Identification SpecificationsParameter Min Typ Max Units7.5.1 Receive Space Frequency 2178 2200 2222 Hz7.5.2 Receive Mark Frequency 1188 1200 1212 Hz7.5.3 Receive Baud Rate 1188 1200 1212 Baud7.5.4 Mark FSK Detector Sensitivity -32 -12 dBm7.5.5 Space FSK Detector Sensitivity -36 -32 dBm7.5.6 FSK Detector Twist -10 10 dB7.5.7 CAS Detection Sensitivity -32 dBm7.5.8 Channel Seizure Delays 300 Bits7.5.9 Immunity to Stuffed Mark Bits 360 BitsCAS7.5.10 Frequency Limits – Lower Tone 2033.5 2130 2236.5 Hz7.5.11 Frequency Limits – Upper Tone 2612.5 2130 2887.5 Hz7.5.12 Dynamic Range (per tone) -32 -14 dBm7.5.13 Twist <6 dB7.5.14 Tone Duration 75 85 msACK7.5.15 Signal Duration 55 65 ms7.6 Radio SpecificationsParameter Min Typ Max Units7.6.1 Number of RF Duplex Channels130 -7.6.2 Base Unit Transmission Frequency 902.30 906.65 MHz7.6.3 Handset Transmission Frequency 923.10 927.75 MHz7.6.4 Transmitter Frequency Stability (over temperature range) -12.5 +12.5 kHz7.6.5 *Handset Recovered Acoustic Level - RF Test Signal2,3 95 97 99 dBspl7.6.6 *Base Unit Recovered Audio Level - RF Test Signal2.4 -11 -10 -9 dBv7.6.7 *Receiver Sensitivity – 100% Data Reception -102 -105 dBm7.6.8 Receiver Muting Level -109 -107 dBm7.6.9 Adjacent Channel Rejection (at 300 kHz offset)550 55 dB7.6.10 Image Rejection555 60 dB7.6.11 *Clear Channel Detection Level -105 dBm

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 86 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeParameter Min Typ Max Units7.6.12 *Deviation648 kHzNotes: 1. A duplex channel includes one base-to-handset frequency and one handset-to-base frequency2. RF test signal: 1 kHz audio signal FM modulated onto an RF carrier with ±25 kHz deviation3. Acoustic level into artificial ear tested at normal (low) volume level4. Measured at telephone line interface across 900 Ω termination5. RF level of desired signal set to provide 25 dB SINAD (CCITT); rejection is relative level ofinterference signal above desired signal to reduce SINAD to 20 dB (CCITT)6. Measured peak-to-peak7.7 Frequency Allocation TablesThe RF channels for the PDLci MK3 are allocated in fixed pairs as indicated in the tables below. The duplexfrequency is maintained at 22.75 MHz for 19 of the 30 channels and 17.95 MHz for the remaining 11 channels.7.7.1 Base Unit FrequenciesChannel # Transmit Frequency Receive Frequency Rx LO Frequency1 902.30 MHz 925.05 MHz 914.35 MHz2 902.60 MHz 925.35 MHz 914.65 MHz3 902.90 MHz 925.65 MHz 914.95 MHz4 903.20 MHz 925.95 MHz 915.25 MHz5 903.50 MHz 926.25 MHz 915.55 MHz6 903.80 MHz 926.55 MHz 915.85 MHz7 904.10 MHz 926.85 MHz 916.15 MHz8 904.40 MHz 927.15 MHz 916.45 MHz9 904.70 MHz 927.45 MHz 916.75 MHz10 905.00 MHz 927.75 MHz 917.05 MHz11 902.45 MHz 925.20 MHz 914.50 MHz12 902.75 MHz 925.50 MHz 914.80 MHz13 903.05 MHz 925.80 MHz 915.10 MHz14 903.35 MHz 926.10 MHz 915.40 MHz15 903.65 MHz 926.40 MHz 915.70 MHz16 903.95 MHz 926.70 MHz 916.00 MHz17 904.25 MHz 927.00 MHz 916.30 MHz18 904.55 MHz 927.30 MHz 916.60 MHz19 904.85 MHz 927.60 MHz 916.90 MHz20 905.15 MHz 923.10 MHz 912.40 MHz21 905.45 MHz 923.40 MHz 912.70 MHz

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 87 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeChannel # Transmit Frequency Receive Frequency Rx LO Frequency22 905.75 MHz 923.70 MHz 913.00 MHz23 906.05 MHz 924.00 MHz 913.30 MHz24 906.35 MHz 924.30 MHz 913.60 MHz25 906.65 MHz 924.60 MHz 913.90 MHz26 905.30 MHz 923.25 MHz 912.55 MHz27 905.60 MHz 923.55 MHz 912.85 MHz28 905.90 MHz 923.85 MHz 913.15 MHz29 906.20 MHz 924.15 MHz 913.45 MHz30 906.50 MHz 924.45 MHz 913.75 MHz7.7.2 Handset FrequenciesChannel # Transmit Frequency Receive Frequency Rx LO Frequency1 925.05 MHz 902.30 MHz 913.00 MHz2 925.35 MHz 902.60 MHz 913.30 MHz3 925.65 MHz 902.90 MHz 913.60 MHz4 925.95 MHz 903.20 MHz 913.90 MHz5 926.25 MHz 903.50 MHz 914.20 MHz6 926.55 MHz 903.80 MHz 914.50 MHz7 926.85 MHz 904.10 MHz 914.80 MHz8 927.15 MHz 904.40 MHz 915.10 MHz9 927.45 MHz 904.70 MHz 915.40 MHz10 927.75 MHz 905.00 MHz 915.70 MHz11 925.20 MHz 902.45 MHz 913.15 MHz12 925.50 MHz 902.75 MHz 913.45 MHz13 925.80 MHz 903.05 MHz 913.75 MHz14 926.10 MHz 903.35 MHz 914.05 MHz15 926.40 MHz 903.65 MHz 914.35 MHz16 926.70 MHz 903.95 MHz 914.65 MHz17 927.00 MHz 904.25 MHz 914.95 MHz18 927.30 MHz 904.55 MHz 915.25 MHz19 927.60 MHz 904.85 MHz 915.55 MHz20 923.10 MHz 905.15 MHz 915.85 MHz21 923.40 MHz 905.45 MHz 916.15 MHz22 923.70 MHz 905.75 MHz 916.45 MHz23 924.00 MHz 906.05 MHz 916.75 MHz

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 88 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeChannel # Transmit Frequency Receive Frequency Rx LO Frequency24 924.30 MHz 906.35 MHz 917.05 MHz25 924.60 MHz 906.65 MHz 917.35 MHz26 923.25 MHz 905.30 MHz 916.00 MHz27 923.55 MHz 905.60 MHz 916.30 MHz28 923.85 MHz 905.90 MHz 916.60 MHz29 924.15 MHz 906.20 MHz 916.90 MHz30 924.45 MHz 906.50 MHz 917.20 MHz7.8 Safety SpecificationsParameter Min Typ Max Units7.8.1 HI POT current15mANotes: 1. Current drawn when 1 kV is applied simplex on tip and ring for 60 s7.9 Factory Settings (Product Level)The default factory settings for the telephone are as follows:Parameter Setting7.9.1 Handset Ringer Volume 3 (high)7.9.2 Handset Ring Type 17.9.3 Handset Receiver Volume 27.9.4 Base Ringer Volume High7.9.5 Base Speaker Volume 17.9.6 Dial Mode Tone7.9.7 Directory Locations All locations empty7.9.8 Speed Dial Locations All locations empty7.9.9 Caller ID Records All records cleared7.9.10 Visual Message Waiting Indicator Cleared7.9.11 Flash time (650 ms)7.9.12 Pulse Dialling Break Duration (60 ms)7.9.13 Pulse Dialling Make Duration (40 ms)7.9.14 Voice Announcement (all)7.9.15 ITAD – Answering Machine On/Off (on)

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 89 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeParameter Setting7.9.16 ITAD – Mailboxes All mailboxes empty7.9.17 ITAD – Personalised Greetings All messages cleared7.9.18 ITAD – Call screening (enabled)7.9.19 ITAD – Number of rings (4)7.9.20 ITAD – PIN 197.9.21 ITAD – Day & Time (Monday, 12:00AM)7.9.22 ITAD – Audible Message Alert (disabled)7.9.23 ITAD – Announce Only (disabled)7.9.24 ITAD – Privacy Screening (disabled)

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 90 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice8 Detailed Electrical Specifications8.1 Chassis TemperatureParameter Min Typ Max Units8.1.1 AC Adapter Case Surface Temperature1,2 50 °C8.1.2 Handset Chassis Surface Temperature1,3 35 °C8.1.3 Base Chassis Surface Temperature1,3 35 °CNotes: 1. Ambient temperature = 25°C2. Operate continuously for 24 hours at rated load of 150 mA8.2 Detailed DC Electrical CharacteristicsSpecifications marked with * are guaranteed at the nominal testing temperature and voltage on all units with the useof automated production test equipment (ATE)Parameter Min Typ Max Units8.2.1 *Base Unit Current - Standby Mode1,2 35 45 55 mA8.2.2 *Base Unit Current - Talk Mode1,2 55 65 75 mA8.2.3 *Handset Current - Sleep Sub-mode33412mA8.2.4 *Handset Current - Wake Sub-mode 38 60 mA8.2.5 *Handset Current - Talk Mode 58 95 mA8.2.6 Handset Sleep Duration - Standby Mode ms8.2.7 Handset Wake Duration - Standby Mode 95 ms8.2.8 *Reset Threshold (HS) – voltage falling/shutdown 3.5 Vdc8.2.9 *Reset Threshold (HS) – voltage rising 3.4 Vdc8.2.10 *Battery Dead Shutdown (HS) 3.2 Vdc8.2.11 Handset Charge Current 60 mA8.2.12 Spare Battery Charge Current 30 mA8.2.13 *Loaded Cradle Charge Contact Voltage43.3 4.3 V8.2.14 *Loaded Spare Battery Charge Contact Voltage41.7 2.5 VNotes: 1. DC current from 9 V power supply2. Cradle and spare battery charge currents = 0 mA3. Average current per cycle (not MCU current consumption)4. Voltage measured across a 50 Ω charge circuit load resistor

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 91 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without notice8.3 Detailed Audio SpecificationsSpecifications marked with * are guaranteed at the nominal testing temperature and voltage on all units with the useof automated production test equipment (ATE).Parameter Min Typ Max Units8.3.1 *Transmit Objective Loudness Rating (TOLR) @ 9 kft1,2 -38 -44 -51 dB8.3.2 *Transmit Objective Loudness Rating (TOLR) @ 15 kft1,2 -36 -42 -49 dB8.3.3 *Receive Objective Loudness Rating (ROLR) @ 9 kft 3,,4 53 48 43 dB8.3.4 *Receive Objective Loudness Rating (ROLR) @ 15 kft 3,4 55 50 45 dB8.3.5 *Sidetone Objective Loudness Rating (SOLR) @ 9 kft 5 19 8 3 dB8.3.6 *Sidetone Objective Loudness Rating (SOLR) @ 15 kft 5 19 8 3 dB8.3.7 Receive Direction (Handset Background) Noise6,7 40 dB(A)Notes: 1. Tested in accordance with EIA 470-B, paragraph 4.2.1.22. Transmit frequency response, when tested in accordance with EIA 470-B, paragraph 4.2.1.3, meetsrequirements in table 33. Tested at normal (low) volume level, in accordance with EIA 470-B, paragraph 4.2.2.24. Transmit frequency response, when tested in accordance with EIA 470-B, paragraph 4.2.2.3, meetsrequirements in table 45. Tested in accordance with EIA 470-B, paragraph 4.2.3.2, methods (d) and (e)6. Tested at normal (low) volume level7. Handset isolated from sound input and mechanical disturbances8.4 Detailed Telephone Line Interface SpecificationsSpecifications marked with * are guaranteed at the nominal testing temperature and voltage on all units with the useof automated production test equipment (ATE).Parameter Min Typ Max Units8.4.1 Off Hook AC Impedance1600 Ω8.4.2 Off Hook DC Resistance2220 ΩNotes: 1. Measured at 1 kHz, -20 dBVoc with 20 mA loop current applied to tip and ring2. Measured with 20 mA loop current applied to tip and ring8.5 Detailed Radio SpecificationsSpecifications marked with * are guaranteed at the nominal testing temperature and voltage on all units with the useof automated production test equipment (ATE).Parameter Min Typ Max Units8.5.1 RF Channel Spacing 150 kHz8.5.2 IF Frequency 10.70 MHz

VTECH ENGINEERING CANADA LTD.TITLE Internal Product SpecificationMODEL PDLci MK3 - 900MHz Single-Line Digital Cordless Telephonewith Caller ID, Speakerphone & Base KeypadReference: PRC 00FN Revision: 0 Page: 92 of 92This document is proprietary to VTECH ENGINEERING CANADA LTD.49371.DOCSpecifications are preliminary and are subject to change without noticeParameter Min Typ Max Units8.5.3 *Handset Transmit Power -7.5 -2.5 dBm8.5.4 *Base Unit Transmit Power -7.5 -2.5 dBm8.5.5 *Handset FM Peak Deviation; Acoustic Test Tone123 25 27 kHz8.5.6 *Base Unit FM Peak Deviation; Audio Test Tone224 25 26 kHz8.5.7 Base & Handset FM Peak Deviation - Overload Level340 kHz8.5.8 *Base FSK Peak Deviation - Data 35 40 45 kHz8.5.9 *Handset FSK Peak Deviation - Data 30 40 55 kHz8.5.10 Receiver Sensitivity – 25 dB SINAD4-110 dBm8.5.11 Intermodulation5,6 55 60 dB8.5.12 Co-channel Rejection -14 -10 dB8.5.13 Open Field Range – clear talking Metres8.5.14 Open Field Range – useable Metres8.5.15 Minimum Channel Searching Time msNotes: 1. Acoustic test tone: 1 kHz tone, 97 dBspl at artificial mouth output2. Audio test tone: 1 kHz tone, -5 dBV open circuit voltage from 900 Ω source3. Overload level corresponds to acoustic overload of 103 dBspl (transmit and receive)4. Measured through a CCITT audio weighting filter5. RF level of desired signal set to provide 25 dB SINAD (CCITT); rejection is relative level ofinterference signal above desired signal to reduce SINAD to 20 dB (CCITT)6. Interfering carriers injected at ±600 kHz and ±1200 kHz offset from the desired signal.8.6 Product ReliabilityThe product will be designed to meet guidelines specified by document WAQ9082.8.7 EEPROM Parameter SettingsThese settings will be available after Prototype Assembly.