VTech Telecommunications 80-6684-00 1.9GHz Cordless Phone (Base with Bluetooth) User Manual 1

VTech Telecommunications Ltd 1.9GHz Cordless Phone (Base with Bluetooth) 1

UserManual.wiki >

VTech Telecommunications >

80-6684-00 User Manual >

Contents

User Manual 1

User’s manual TL91178/TL91278/TL91378TL91278/TL91378TL91378 DECT 6.0 cordless telephone with Bluetooth®wireless technology

Model #: TL91178 (one handset) TL91278 (two handsets) TL91378 (three handsets) Type: DECT 6.0 cordless telephone with Bluetooth wireless technologySerial #: Purchase date: Place of purchase: Both the model and serial number of your AT&T product can be found on the bottom of the telephone base. Save your sales receipt and original packaging in case it is necessary to return your telephone for warranty service. Congratulations on your purchase of this AT&T product.Before using this AT&T product, please read the Important safety information on pages 72-74 of this manual.Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

Before you beginyou must install and charge the battery. See page 9 for Battery installation instructions.Please read and follow these instructions carefully:• Use only the supplied rechargeable battery or replacement battery.• Observe the proper polarity orientation between the battery and handset during battery installation.• Do not dispose of the battery in a fire. Check with local codes for special disposal instructions.• Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.• Exercise care in handling batteries in order not to create a short circuit with conductive materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm.• Charge the supplied battery or replacement battery with this product only in accordance with the instructions and limitations specified in this manual.• Do not disassemble your telephone. There are no user-serviceable parts inside. Refer to qualified service personnel for servicing.• To prevent fire or shock hazard, do not expose this product to To prevent fire or shock hazard, do not expose this product to water or any type of moisture.

Telephone baseBattery for cordless handset(1 for TL91178)(2 for TL91278)(3 for TL91378)Cordless handset(1 for TL91178)(2 for TL91278) (3 for TL91378)Charger for cordless handset with power adapter installed(1 for TL91278)(2 for TL91378)Battery compartment cover(1 for TL91178)(2 for TL91278)(3 for TL91378)User's manual Quick start guideUser’s manual TL91178/TL91278/TL91378 DECT 6.0 cordless telephone with BLUETOOTH®wireless technologyQuick start guideTL91178/TL91278/TL91378 DECT 6.0 cordless telephone with BLUETOOTH®wireless technologyWall mount bracket Telephone line cord Power adapter for telephone baseParts checklistYour telephone package contains the following items.

User’s manual TL91178/TL91278/TL91378 DECT 6.0 cordless telephone with Bluetooth®wireless technologyGetting startedQuick reference guide handsethandset ............................................ 1 telephone base ............................ 3Handset status icons ....................... 4Installation ............................................ 5Telephone base installation ......... 7Charger installation .......................... 8Battery installation & charging ........................................... 9Installation options ...............................10BluetoothIntroducing Bluetooth ...................15Glossary of terms ............................16Bluetooth setup ...............................17Handset settingsHandset main menu .......................20Handset settings ..............................21Telephone operationHandset operation ..........................26Options while on calls ..................32Chain dialing ......................................35 Intercom ...............................................36Call transfer using intercom ......38DirectoryAbout the directory ........................40Creating directory entries ...........41Directory review ...............................43 Directory search ...............................44To dial, delete or edit entries ...................................45Caller IDCaller ID operation ..........................47To review the caller ID history ..............................................52Appendix A, Alert tones and lights ...................54Appendix B, Handset display screen messages ......................................55Appendix C,Expansion handset ...............................58Adding & registering handsets .....59Replacing a handset ............................60 Table of contents

Appendix D, Troubleshooting ...............................61Appendix E,Maintenance.......................................71Appendix F, Important safety information ....72Appendix G, FCC Part 68 and ACTA..................75Appendix H, FCC Part 15 ........................................77Appendix I, Limited warranty ..............................78Appendix J, Technical specifications ...............81Index ...................................................83Table of contents

Getting started1MENU/SELECTPress to show the menu. While in the menu, press to select an item or save an entry or setting.Quick reference guide - handsetDELETE/MUTEDuring a call, press to mute microphone (page 33). While reviewing the caller ID history, press to delete an individual entry, or press and hold to clear the caller ID history (page 53). While predialing, press to delete digits (pages 26 & 28).REDIAL/PAUSEPress to view redial memory (page 30). While entering numbers, press and hold to insert a dialing pause (page 45).SPEAKERPress to turn on the handset speakerphone. Press again to resume normal handset use (page 30).HOME/FLASHPress to make or answer a HOME call.Flashes rapidly when there is rapidly when there is an incoming HOME call. Flashes slowly when a HOME call is on hold.During a HOME call, press to receive an incoming call if call waiting is activated (page 26). CELLULARPress to make or answer a CELLULAR call.Flashes rapidly when there is an incoming CELLULAR call.Flashes slowly when a CELLULAR call is on hold.During a CELLULAR call, press to receive an incoming call if call waiting is activated (page 29).OFF/CLEARDuring a HOME or CELLULAR line call, press to end the call.While in a menu, press to cancel an operation, back up to the previous menu, or exit the menu display.CHARGE indicatorOn when the handset is charging in the telephone base or charger. DIR / CID Press DIR to show directory entries (page 45). Press to scroll up while in menus. While entering names or numbers, press to move the cursor to the right. Press to increase the listening volume when on a call.Press CID to show caller ID history (page 52). Press to scroll down while in menus. While entering names or numbers, press to move the cursor to the left.Press to decrease the listening volume when on a call.HOLDPress to put the HOME or CELLULAR call on hold (page 34).

Getting started2Feature menuFeature menuDIRECTORY (page 40)CALL LOG (page 47)INTERCOM (page 36) - This feature is not available on model TL91178.RINGER VOLUME (page 21)RINGER TONE (page 22)KEY TONE (page 23)LANGUAGE (page 23)CLR VOICEMAIL (page 24)HOME AREA CODE (page 25) Using menusPress or to scroll through menu items.Press MENU/SELECT to select or save changes to a highlighted menu item.Press OFF/CLEAR to cancel an operation, back up to the previous menu, or exit the menu display.The > symbol shows a highlighted menu item.Quick reference guide - handset>DIRECTORYCALL LOG

Getting started3IN USE indicatorOn when the handset is in use, or when you are registering a handset.Flashes when another telephone is in use on the same line, or when you are de-registering handsets from the telephone base.Flashes quickly when there is an incoming call. •••Quick reference guide - telephone base VOICEMAIL indicatorFlashes when you have new voicemail on your HOME line (offered by your telephone service provider). The indicator does not support voicemail on your CELLULAR line. HANDSET LOCATORPress to make handsets beep so you can locate them (page 31). BluetoothPress and hold to enable the Bluetooth feature on the telephone base (page 17).On when the telephone base is paired and connected with a cellular phone. Flashes when the Bluetooth feature is activated and waiting for pairing and connection. •••

Getting started4Handset status iconsHANDSET 110:21 AM 11/23 25 MISSED CALLS NEWMUTEHOME line - on steady when the HOME line is in use. CELLULAR line - on steady when the CELLULAR line is in use. BLUETOOTH - on steady when a cellular phone is connected with the telephone base. NEW VOICEMAIL - new voicemail received on your HOME line. SPEAKERPHONE - the speakerphone is in use. Ringer off - the handset ringer is turned off. Battery status - battery is charging (animated display). Battery status - low battery (flashing); place handset in telephone base or charger to recharge. MUTE Microphone is muted.NEW Missed and unreviewed calls.

Getting startedInstallation5Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (see page 10). For optimum range and better reception, place the telephone base in a central and open location.You may hear interference if your cellular phone is too close to the telephone base during a CELLULAR call. Make sure that your Bluetooth enabled cellular phone is between one to 12 feet away from the telephone base in order to maintain a clear and consistent connection between your Bluetooth cell phone, telephone base and cell tower.If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter between the telephone base and the telephone wall jack (see the following page). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.Your product may be shipped with a protective sticker covering the handset or telephone base display - remove it before use.For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.STOP! See page 9for easy instructions.You must install and charge the handset battery before using the cordless handset.

6Getting startedInstallationAvoid placing the telephone base too close to:• Communication devices such as: television sets, VCRs, or other cordless telephones.• Excessive heat sources.• Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting.• Excessive dust sources such as a workshop or garage.• Excessive moisture.• Extremely low temperature.• Mechanical vibration or shock such as on top of the washing machine or workbench.

Getting started7Telephone base installationInstall the telephone base as shown below. Make sure that the electrical outlet is not controlled by a wall switch. If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter between the telephone base and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.The telephone base is set for desktop use. If you want to change to the wallIf you want to change to the wall mounting position, install the supplied wall mount bracket to the telephone base. See page 10 for details.7. Raise the antenna.3. Plug one end of the telephone line cord into the telephone jack at the bottom of the telephone base. 2. Route the power cord through the slot next to the telephone jack. Power adapterDSL filter (not included), required if you have DSL high-speed Internet service.Telephone line cord1. Plug the small end of the power adapter into the power jack at the bottom of the telephone base. 5. Plug the other end of the telephone line cord into a telephone jack or a DSL filter. 6. Plug the large end of the power adapter into a power outlet not controlled by a wall switch. 4. Place the cords into the channels.

Getting started8IMPORTANT INFORMATIONUse only the power adapter supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.1.2.Plug the power adapter into an electrical outlet not controlled by a wall switch.�harger installation

Getting started9Battery installation & chargingInstall the battery as shown below. After installing the battery, you can make and receive short calls. Place the handset in the telephone base or charger when not in use. For optimal performance, charge the handset battery for at least 16 hours before use. See the table on page 81 for battery operating times. Step 1Plug the battery securely into the connector inside the handset battery compartment, matching the color-coded label. Insert the supplied battery with the label THIS SIDE UP facing up as indicated. Step 2Step 3Press on the recessed area and slide the battery compartment cover downwards (if necessary).Align the cover flat against the battery compartment cover, then slide it upwards until it clicks into place.Charge the handset by placing it face up in the telephone base or charger. The CHARGE light is on when charging.Step 4IMPORTANT INFORMATIONUse only the supplied rechargeable battery or replacement battery (model BT8001). To order, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.CHARGE light

Getting started10Installation optionsThe telephone base is set for desktop use. It is possible to change to a wall mounting position by installing the provided wall mount bracket. Wall mounting requires a telephone outlet wall mounting plate with mounting studs that may require professional installation. You can purchase the mounting plate from many hardware or consumer electronics retailers. Desktop to wall mount installationBefore you begin, make sure you unplug the telephone line cord and power adapter from the wall outlets. To prevent possible damage, remove the handset from the telephone base.2. Push the telephone base down until it clicks into place on both sides of the bracket. 1. Position the telephone base as shown below, and insert the extended tabs of the bracket into the slots under the telephone base.

Getting started11Installation optionsDesktop to wall mount installation4. Route the telephone line cord through the bracket hole and plug it into the wall jack or a DSL filter (if required). Align the holes on the bracket with the standard wall plate and slide the bracket downward on the mounting studs until the telephone is secure. Plug the power adapter into a power outlet not controlled by a wall switch.3. Bundle the telephone line cord and power adapter cord, and secure them withBundle the telephone line cord and power adapter cord, and secure them with a twist tie before placing them behind the telephone base as shown below. DSL filter (not included), required if you have DSL high-speed Internet service.

Navigation menu