VTech Telecommunications 80-7279-00 1.9GHz CORDLESS PHONE User Manual 21Aug09 EL52200 300 400 CIB 8 19 09

VTech Telecommunications Ltd 1.9GHz CORDLESS PHONE 21Aug09 EL52200 300 400 CIB 8 19 09

Contents

Users Manual 2

User’s manualEL52200/EL52300/EL52400DECT 6.0 cordless telephone/answering system with caller ID/call waiting
© 2009 Advanced American Telephones. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China.Congratulationson purchasing your new AT&T product. Before using this AT&T product, please read Important safety information on page 66 of this user’s manual. Please thoroughly read the user’s manual for all the feature operations and troubleshooting information you need to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.Model #: EL52200 (two handsets)EL52300 (three handsets)EL52400 (four handsets)Type: DECT 6.0 cordless telephone with answering systemSerial #: ________________________________________________________________Purchase date: __________________________________________________________Place of purchase: ______________________________________________________Both the model and serial number of your AT&T product can be found on the bottom of the telephone base.The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR® label indicating it meets the latest energy efficiency guidelines.Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license.
Parts checklistYour telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.Wall-mount bracketQuick start guideTelephone line cordCharger for cordless handset with power adapter installed(1 for EL52200)(2 for EL52300)(3 for EL52400)Telephone base Cordless handset(2 for EL52200)(3 for EL52300)(4 for EL52400)Battery compartment cover(2 for EL52200)(3 for EL52300)(4 for EL52400)Battery for cordless handset(2 for EL52200)(3 for EL52300)(4 for EL52400)User’s manualPower adapter for telephone base
iUser’s manualEL52200/EL52300/EL52400DECT 6.0 cordless telephone/answering system with caller ID/call waitingTable of contentsGetting startedTelephone overview..............................2Indicator lights and alert tones......4Screen icons.............................................5Telephone base and charger installation...........................................6Battery installation and charging ..8Wall-mount installation ...................10Telephone settingsMenu overview.....................................13Handset settings .................................14Answering system settings............18Telephone base ringer volume ....22Telephone operationMaking, answering and ending a call....................................................23Options while on calls......................25Redial........................................................28Handset locator...................................29Intercom ..................................................30Call transfer using intercom..........31DirectoryDirectory overview .............................32Directory storage ................................33Reviewing the directory...................35Dialing, deleting and editing a directory entry............................36Speed dial locations..........................38Caller ID operationCaller ID overview ..............................40Reviewing call history.......................43Returning a call and deleting an entry..............................................44Saving a caller ID history entry in the directory....................................45Answering system operationAnswering system and voicemail ...........................................46Answering system overview..........47Message playback ..............................49Recording and playing memo.......51Message window displays ..............52Remote access.....................................53AppendixDisplay screen messages................55Troubleshooting...................................57Maintenance..........................................65Important safety information........66
iiFCC part 68 and ACTA .....................68FCC part 15............................................69Limited warranty .................................70Technical specifications...................72Index..........................................................73Remote access wallet card............75
1Install the telephone base close to a telephone wall jack and an electrical outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (page 10). For optimum range and better reception, place the telephone base in a central and open location.If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (page 6). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.Your product may be shipped with a protective sticker covering the handset or telephone base display - remove it before use.For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.Avoid placing the telephone base too close to:Communication devices such as: television sets, VCRs, or other cordless telephones.Excessive heat sources.Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting.Excessive dust sources such as a workshop or garage.Excessive moisture.Extremely low temperature.Mechanical vibration or shock such as on top of the washing machine or work bench.•••••••You must install and charge the handset battery before using the cordless handset.See pages 8-9 for easy instructions.
2Getting startedTelephone overviewREDIAL/PAUSEPress repeatedly to view the last 20 numbers dialed (page 28).While entering numbers, press and hold to insert a dialing pause (pages 23 and 33).PHONE/FLASHPress to make or answer a call (page 23).During a call, press to answer an incoming call when you receive a call waiting alert (page 25).1While reviewing a caller ID history entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory (page 43).MUTE/DELETEDuring a call, press to mute the microphone (page 25).While predialing, press to delete digits (page 23).While reviewing the redial list, directory or caller ID history, press to delete an individual entry (pages 28, 36 and 44).TONEDuring a call, press to send touch-tone signals (page 26).SPEAKERPress to turn on the handset speakerphone, press again to resume normal handset use (page 24).INTPress to initiate an intercom conversation or transfer a call (pages 30 and 31).DIR/VOLUMEPress to scroll up while in menus (page 13).Press to increase the listening volume (pages 25, 48 and 49).Press to show directory entries when the telephone is not in use (page 35).While entering names or numbers in the directory, press to move the cursor to the left (page 33).CID/VOLUMEPress to scroll down while in menus (page 13).Press to decrease the listening volume (pages 25, 48 and 49).Press to show the caller ID history when the telephone is not in use (page 43).While entering names or numbers in the directory, press to move the cursor to the right (page 33).MENU/SELECTPress to display the menu (page 13).Once in the menu, press to select an item or save an entry or setting (page 13).OFF/CLEARDuring a call, press to hang up (page 24).While using menus, press to cancel an operation, back up to the previous menu, or exit the menu display (page 13).Press and hold while the telephone is not in use to erase the missed calls indicator (page 42).#Press repeatedly to display other dialing options when reviewing a caller ID history entry (page 43).
3Getting startedUsing menusPress MENU/SELECT to enter the main menu.Press DIR or CID to scroll through menu items.Press MENU/SELECT to select or modify an item.Press OFF/CLEAR to cancel an operation, back up to the previous menu, or exit the menu display.Telephone overviewMain menuPLAY NEW MSGS (page 49)ANSWERING SYS (page 18)DIRECTORY (page 32)CALL LOG (page 40)RINGERS (page 14)SETTINGS (pages 14-17)>PLAY NEW MSGSANSWERING SYS> indicates the feature you want to select. ANSWER ON/OFFPress to turn the built-in answering system on or off (page 47).Message windowNumber of messages.During playback, message number currently playing. PLAY/STOPPress to start or stop message playback (page 50). DELETEPress to delete the message currently playing (page 50).Press twice to delete all old messages when the telephone is not in use (page 50). REPEATPress to repeat a message (page 50).Press twice to play the previous message (page 50). SKIPPress to skip a message (page 50). HANDSET LOCATORPress to make handsets beep so you can locate them (page 29). VOLUMEWhile the telephone is not in use, press to adjust the telephone base ringer volume (page 22).During call screening or message playback, press to adjust the listening volume (pages 48and 50).
4Getting startedIndicator lights and alert tonesHandset indicator lightsTelephone base indicator lightsHandset alert tonesOne beep A key is pressed.One long beep Start recording.Two short beeps Command has failed.-OR-You have reached the beginning or end of the list.Three short beeps Out of range while the handset is on a call.Three short high-pitched beeps The telephone has completed the command successfully.Four short beeps Low battery warning.Telephone base alert tonesBeeps every 10 seconds Message alert.Four short beeps You have reached the minimum or maximum volume.CHARGE lightOn when the handset is charging in the telephone base or charger.Backlight (lighted display and dial pad)On when the handset is lifted from the telephone base or charger.On when a key is pressed. SPEAKER lightOn when the speakerphone is in use. ANS ON/OFF lightOn when the answering system is on.IN USE lightOn when the handset is in use or when the answering system is answering an incoming call.Flashes when another telephone on the same line is in use.Flashes quickly when there is an incoming call.
5Getting startedScreen icons(flashing)Low battery; place handset in telephone base or charger to recharge. or or Indicates the battery voltage level.(animated display)or(animated display)Battery is charging.The speakerphone is in use.The handset ringer is turned off.New voicemail received from the telephone service provider.Answering system is turned on.New message in the answering system.Missed and unreviewed calls.Microphone is muted.10/16MSG # Number of messages currently playing. (XX/YY; XX is the number of new messages; YY is the total number of all messages.)MSG #10/16HANDSET 116 MISSED CALLS10:30PM
6Getting startedIf you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.Follow the steps below to install the telephone. NOTE: The telephone base comes ready for tabletop use without installing the wall-mount bracket. If you want to mount your telephone on a wall, refer to Wall-mount installation on page 10 for details.Telephone base and charger installationTelephone line cordDSL filter (not included) required if you have DSL high-speed Internet service.Telephone wall jackPlug one end of the telephone line cord into the TEL LINE jack on the bottom of the telephone base.2.Plug the other end of the telephone line cord into a telephone wall jack.4.Plug the small end of the larger power adapter into the POWERjack on the bottom of the telephone base.1.Electrical outlet not controlled by a wall switchPlug the large end of the larger power adapter into an electrical outlet not controlled by a wall switch.5.Route the cords through the slots.3.
7Getting startedIMPORTANT INFORMATION:Use only the power adapters provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.••Telephone base and charger installationPlug the large end of the smaller power adapter into an electrical outlet not controlled by a wall switch.Ensure the small end of the smaller power adapter is plugged in the jack on the bottom of the charger.
8Getting startedBattery installation and chargingBattery installationInstall the battery as shown below.IMPORTANT INFORMATION:Use only the supplied rechargeable battery or replacement battery (model BT8001). To order, visit our website at www.telephones.att.com, or call 1 (800) 222-3111.In Canada, dial 1 (866) 288-4268.To replace the battery, press the tab and slide the battery compartment cover downwards. Lift out the old battery and disconnect it from the handset. Follow the instructions above to install and charge the new battery.Charge the handset by placing it face up in the telephone base or charger. The CHARGElight is on when charging.4.Align the cover flat against the battery compartment, then slide it upwards until it clicks into place.3.Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label. 1. Insert the supplied battery with the label THIS SIDE UP facing up as indicated.2.
9Getting startedBattery installation and chargingBattery chargingOnce you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the charger when not in use. The battery is fully charged after 16 hours of continuous charging. See Technical specifications on page 72 for battery operating times.If the screen is blank, you need to charge the handset without interruption for at least 10 minutes to give the handset enough charge to use the telephone for a short time. The screen shows LOW BATTERY and the backlight is off until you have charged the battery without interruption for at least one hour. The following table summarizes the battery charge indicators and actions to take.Battery indicators Battery status ActionThe screen is blank. Battery has no charge and the handset cannot be used.Charge without interruption until the screen shows HANDSET X (at least 10 minutes).The screen shows PLACE IN CHARGER and flashesBattery has very little charge and the handset cannot be used.Charge without interruption until the screen shows HANDSET X (at least four minutes).The screen shows LOW BATTERY and flashes.Battery has enough charge to be used for a short time.Charge without interruption until the screen shows HANDSET X (at least one hour).The screen shows HANDSET Xand the battery icon shows , or .Battery is charged. To keep the battery charged, place it in the telephone base or charger when not in use.NOTE: If you are on a call in low battery mode, you hear four short beeps every minute.Battery status icon11/20HANDSET 116 MISSED CALLS10:30PM
10Getting startedWall-mount installationThe telephone base comes ready for tabletop use (see Telephone base and charger installation on page 6). If you want to mount your telephone on a wall, use the provided wall-mount bracket to connect with a standard dual-stud telephone wall-mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronics retailers. Professional assistance may be required to install the mounting plate.Tabletop to wall-mount installationTo install the telephone base in the wall-mount position, make sure you first unplug the power adapter from the electrical outlet and unplug the telephone line cord from the wall outlet.Plug one end of the telephone line cord into the TEL LINE jack on the bottom of the telephone base. Plug the small end of the larger power adapter into the POWER jack on the bottom of the telephone base.Position the telephone base as shown below. Insert the extended tabs of the wall-mount bracket into the slots on the back of the telephone base. Push the telephone base down until it clicks securely in place.Route the telephone line cord through the wall-mount bracket hole. Route the power cord out of the bottom of the telephone.1.2.3.Slots for wall-mount bracket installationDSL filter (not included) required if you have DSL high-speed Internet service.
11Getting startedWall-mount installationPlug the other end of the telephone line cord into the telephone wall jack. Plug the large end of the larger power adapter into an electrical outlet not controlled by a wall switch.4.Align the holes on the wall-mount bracket with the wall-mounting plate and slide the bracket down until it locks securely. Bundle the telephone line cord and power adapter cord neatly with twist ties.5.DSL filter (not included) required if you have DSL high-speed Internet service.DSL filterDSL filter
12Getting startedWall-mount installationWall-mount to tabletop installationTo change the telephone base from the wall-mount position to tabletop position, follow the steps below.Unplug the large end of the larger power adapter from the electrical outlet.Slide and remove the wall-mount bracket from the wall-mounting plate. If the telephone line cord and power adapter cord are bundled, untie them first. Unplug the end of the telephone line cord from the telephone wall jack.1.2.Lift the telephone base up to detach it from the wall-mount bracket.3.Refer to Telephone base and charger installation on page 6 to reinstall the telephone base.4.
13Menu overviewUse the menu to change the telephone settings.Press MENU/SELECT in idle mode (when the telephone is not in use) to enter the main menu.Press DIR or CID to scroll until the > is next to the feature you want to select.Press MENU/SELECT to select or save the highlighted item.-OR-Press OFF/CLEAR to cancel an operation, back up to the previous menu or exit the menu display.-OR-Press and hold OFF/CLEAR to cancel an operation and return to idle mode.-OR-If no key is pressed after 30 seconds, the handset automatically cancels an operation and returns to idle mode.NOTE: The menus PLAY NEW MSGS,ANSWERING SYS,DIRECTORY,CALL LOG,CLR VOICEMAIL,SET DATE/TIME,HOME AREA CODE and DIAL MODE are stored in the telephone base, and are shared by all handsets. Changes made to them on any one handset apply to all.1.2.3.Main menuPLAY NEW MSGSANSWERING SYSDIRECTORYCALL LOGRINGERSSETTINGSCALL SCREENING# OF RINGSREMOTE CODEMSG ALERT TONEPLAY MESSAGESANNOUNCEMENTDEL ALL OLDRECORD MEMOANSWER ON/OFFANS SYS SETUPRINGER VOLUMERINGER TONELCD LANGUAGECLR VOICEMAILKEY TONESET DATE/TIMEHOME AREA CODEDIAL MODEThe handset is in idle mode.11/20HANDSET 116 MISSED CALLS10:30PM> indicates the feature you want to select.>PLAY NEW MSGSANSWERING SYSTelephone settings
14Telephone settingsHandset settingsRinger volumeUse this feature to set the handset ringer volume level (1-6), or turn the ringer off. When the ringer is off, appears on the handset screen. Press MENU/SELECT in idle mode to enter the main menu.Press DIR or CID to scroll to >RINGERS. Press MENU/SELECT.Press MENU/SELECT to select >RINGER VOLUME.Press DIR or CID to sample each volume level.Press MENU/SELECT to save your preference and return to the main menu.NOTES:Changing the handset ringer volume does not affect the base ringer volume. For more information on the base ringer volume, see Telephone base ringer volume on page 22.The handset ringer volume also determines the ringer volume of intercom calls (see Intercom on page 30).If the handset ringer volume is set to off, that handset is silenced for all incoming calls, but that handset still has the paging tone when initiating the handset locator feature (see Handset locator on page 29).While the telephone is ringing, pressing OFF/CLEAR or MUTE/DELETE silences the ringer temporarily on that handset only (see Temporary ringer silencing on page 23).Ringer toneUse this feature to choose one of 10 ringer tones for the handset.Follow steps 1 and 2 in Ringer volume on this page.Press DIR or CID to scroll to >RINGER TONE, then press MENU/SELECT.Press DIR or CID to sample each ringer tone.Press MENU/SELECT to save your preference and return to the main menu.NOTE: If you turn off the ringer volume, you will not hear ringer tone samples.LCD languageUse this feature to select the language used for all screen displays.Press MENU/SELECT in idle mode to enter the main menu.Press DIR or CID to scroll to >SETTINGS.Press MENU/SELECT twice to select >LCD LANGUAGE.Press DIR or CID to select ENGLISH,FRANÇAIS or ESPAÑOL.Press MENU/SELECT to save your preference and return to the main menu.1.2.3.4.5.••••1.2.3.4.1.2.3.4.5.RINGER VOLUMERINGER TONE1LCD LANGUAGEENGLISH
15Telephone settingsHandset settingsVoicemail (visual message waiting) indicatorIf you subscribe to a voicemail service offered by your telephone service provider, this feature provides a visual indication when you have new voicemail messages. NEW VOICEMAIL and appear on the handset screen.NOTES:Your telephone service provider might alert you to new voicemail messages with a stutter (broken) dial tone. Contact your telephone service provider for more details.This feature does not indicate new messages recorded on your telephone’s built-in answering system.For more information about the difference between your answering system and voicemail, see Answering system and voicemail on page 46.Clear voicemail indicationUse this feature when the telephone indicates there is new voicemail but there is none. This may occur, for example, when you have accessed your voicemail while away from home. This feature only turns off the displayed NEW VOICEMAIL message and icon; it does not delete your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal to turn on the indicator. To manually turn off the new voicemail indicator:Press MENU/SELECT when in idle mode to enter the main menu.Press DIR or CID to scroll to >SETTINGS, then press MENU/SELECT.Press DIR or CID to scroll to >CLR VOICEMAIL, then press MENU/SELECT. The screen shows TURN OFF INDICATOR?Press MENU/SELECT to turn the voicemail indication off, or press OFF/CLEAR to cancel the procedure.NOTES:Your telephone service provider might alert you to new voicemail messages with a stutter (broken) dial tone. Contact your telephone service provider for more details.For information about using your voicemail service, contact your telephone service provider for assistance.•••1.2.3.4.••11/20HANDSET 1NEW VOICEMAIL10:30PMTURN OFFINDICATOR?
16Telephone settingsHandset settingsKey toneThe handset is factory programmed to beep with each key press. If you turn off the KEY TONE, there are no beeps when you press keys.Press MENU/SELECT in idle mode to enter the main menu.Press DIR or CID to scroll to >SETTINGS, then press MENU/SELECT.Press DIR or CID to scroll to >KEY TONE, then press MENU/SELECT.Press DIR or CID to select ON or OFF.Press MENU/SELECT to save your preference and return to the main menu.Set date/timeThe answering system announces the date and time of each message received prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call (see About caller ID on page 40). However, the year must be set so that the day of the week can be calculated from the caller ID information.Follow the steps below to set the month, day, year and time.Follow steps 1 and 2 in Key tone on this page.Press DIR or CID to scroll to >SET DATE/TIME, then press MENU/SELECT.Press DIR or CID to select the month, or use the dial pad keys to enter the correct number (01-12), then press MENU/SELECT to confirm.Press DIR or CID to select the day, or use the dial pad keys to enter the correct number (01-31), then press MENU/SELECT to confirm.Press DIR or CID to select the year, or use the dial pad keys to enter the correct number (01-99), then press MENU/SELECT to confirm.Press DIR or CID to select the hour, or use the dial pad keys to enter the correct number (01-12), then press MENU/SELECT to confirm.Press DIR or CID to select the minute, or use the dial pad keys to enter the correct number (00-59), then press MENU/SELECT to confirm.Press DIR or CID to select AM or PM, then press MENU/SELECT to confirm. There is a confirmation tone.1.2.3.4.5.1.2.3.4.5.6.7.8.KEY TONEONSET DATE--/--/--SET TIME--:-- --
17Telephone settingsHome area codeIf you dial seven digits to make a local call (no area code required), enter your area code into the telephone as the home area code. When you receive a call from within your home area code, the caller ID history only displays the seven digits of the telephone number.This feature makes it easy for you to place a call from the caller ID history. If you dial 10 digits to make a local telephone call, do not use this home area code feature. If you do, you will not be able to place calls from your caller ID history as they have only seven digits.Press MENU/SELECT in the idle mode to enter the main menu.Press DIR or CID to scroll to >SETTINGS, then press MENU/SELECT.Press DIR or CID to scroll to >HOME AREA CODE, then press MENU/SELECT.Press the dial pad keys to enter a three-digit home area code. Press MUTE/DELETE to delete digits while entering.Press MENU/SELECT to save the setting and return to the main menu.NOTE: If, in the future, your telephone service provider requires you to dial 10 digits to make a local call (area code + telephone number), you will need to delete your home area code. Follow steps 1 through 3 above, while the home area code displaying, press and holdMUTE/DELETE. The home area code is now restored to its default setting of _ _ _ (empty).Dial modeUse this feature to choose tone (touch-tone) or pulse (dial-pulse) dialing. The factory setting is TONE. Change this to PULSE only if you do not have touch-tone dialing service.Follow steps 1 and 2 in Home area code on this page.Press DIR or CID to scroll to >DIAL MODE, then press MENU/SELECT.Press DIR or CID to select TONE or PULSE.Press MENU/SELECT to save the setting and return to the main menu.NOTE: If you have dial-pulse (rotary) dialing service only, refer to Temporary tone dialingon page 26 to temporarily switch from dial-pulse to touch-tone dialing during a call.1.2.3.4.5.1.2.3.4.Handset settingsHOME AREA CODE_ _ _DIAL MODETONE
18Telephone settingsAnswering modeUnless you change it, the answering system is on and ready to record messages. You can turn the answering system off, but if you do so, the answering system does not answer calls and record incoming messages.Press MENU/SELECT when in idle mode to enter the main menu.Press DIR or CID to scroll to >ANSWERING SYS, then press MENU/SELECT.Press DIR or CID to scroll to >ANSWER ON/OFF, then press MENU/SELECT.Press DIR or CID to select between ON and OFF, then press MENU/SELECT to confirm the setting. A confirmation tone sounds.NOTES:If the answering system is off and there is an incoming call, the system answers after 10 rings and announces to the caller, “Please enter your remote access code.” For more information about remote access, see Remote access on page 53.You can also turn the answering system on or off from the telephone base. Refer to Turning the answering system on or off at the telephone base on page 47 for details.Outgoing announcementOutgoing announcements are the messages callers hear when calls are answered by the answering system. The telephone has a pre-recorded outgoing announcement, “Hello. Please leave a message after the tone.” You can use this announcement, or record your own announcement.You can record an announcement up to 90 seconds. The system does not record any announcement shorter than two seconds.To record a new outgoing announcementUse the following steps to record an outgoing announcement with a recording of your own.Press MENU/SELECT when in idle mode to enter the main menu.Press DIR or CID to scroll to >ANSWERING SYS, then press MENU/SELECT.Press DIR or CID to scroll to >ANNOUNCEMENT, then press MENU/SELECT. The system announces, “To play, press 2. To record, press 7.”Press 7. The system announces “Record after the tone, press 5 when you are done.”1.2.3.4.••1.2.3.4.ANSWER ON/OFFON>ANNOUNCEMENTDELETE ALL OLD2-PLAY 3-DELETE5-STOP 7-RECORDAnswering system settings
19Telephone settingsSpeak towards the microphone on the handset.Press 5 when you finish the recording.NOTE: If the answering system memory is full, when you press 7in step 4, the answering system announces, “Memory is full.” You must delete some messages before you can record a new announcement.To play the current outgoing announcementUse the following steps to listen to the current outgoing announcement.Follow steps 1-3 in To record a new outgoing announcement on page 18.Press 2 to play the current announcement from the speakerphone.Press DIR/VOLUME to increase or press CID/VOLUMEto decrease the message playback volume.Press SPEAKER to switch between speakerphone and handset earpiece.To delete your outgoing announcementUse the following steps to delete the outgoing announcement you recorded.Follow steps 1-3 in To record a new outgoing announcement on page 18.Press 2 to play the current announcement.Press 3 during playback to delete your recorded announcement.If your announcement is deleted, calls are answered with the pre-recorded announcement, “Hello. Please leave a message after the tone.”5.6.1.2.••1.2.3.RECORD ANNC...5-STOP2-PLAY 3-DELETE5-STOP 7-RECORD2-PLAY 3-DELETE5-STOP 7-RECORDAnswering system settings
20Telephone settingsCall screening setupUse this menu to choose whether incoming messages are played through the speaker on the telephone base while they are being recorded.To change the settings:Press MENU/SELECT when in idle mode to enter the main menu.Press DIR or CID to scroll to >ANSWERING SYS, then press MENU/SELECT.Press DIR or CID to scroll to >ANS SYS SETUP. Press MENU/SELECT.Press MENU/SELECT to select >CALL SCREENING.Press DIR or CID to choose between ON and OFF.Press MENU/SELECT to confirm your setting. A confirmation tone sounds.NOTE: For more details about the feature call screening, see Call screening on page 48.Number of ringsUse this feature to set the answering system to answer an incoming call after two, four, or six rings. You can also select toll saver, which is explained below. Unless you change it, the answering system answers an incoming call after four rings.To set the number of rings:Follow steps 1-3 in Call screening setup on this page.Press DIR or CID to scroll to ># OF RINGS, then press MENU/SELECT.Press DIR or CID to scroll and choose among 2,4,6 or TOLL SAVER.Toll saver - the answering system answers a call after two rings if you have new messages, and after four rings when there are no new messages. This feature allows you to check for new messages and avoid paying long distance charges if you are calling from out of your local area.Press MENU/SELECT to confirm your setting. A confirmation tone sounds.NOTE: If you subscribe to a voicemail service offered through your telephone service provider, see Answering system and voicemail on page 46.1.2.3.4.5.6.1.2.3.•4.CALL SCREENINGON# OF RINGS4Answering system settings
21Telephone settingsAnswering system settingsRemote access codeTo access your answering system remotely from any touch-tone telephone, you need to enter a two-digit number (10-99). Unless you change it, the remote access code is 19.To change the remote access code:Press MENU/SELECT when in idle mode to enter the main menu.Press DIR or CID to scroll to >ANSWERING SYS, then press MENU/SELECT.Press DIR or CID to scroll to >ANS SYS SETUP, then press MENU/SELECT.Press DIR or CID to scroll to >REMOTE CODE, then press MENU/SELECT.Press DIR or CID to change the remote access code.Press MENU/SELECT to confirm your setting. A confirmation tone sounds.NOTE: For more details about the feature remote access, refer to Remote access on page 53.Message alert toneWhen the message alert tone is set to ON, and there is at least one new message, the telephone base beeps every 10 seconds. Unless you change it, the message alert tone is set to off.To change the setting:Follow steps 1-3 in Remote access code on this page.Press DIR or CID to scroll to >MSG ALERT TONE, then press MENU/SELECT.Press DIR or CID to choose between ON and OFF.Press MENU/SELECT to confirm your setting. A confirmation tone sounds.NOTES:The message alert tone beeps only if all the conditions below are met:Answering system is on.Message alert tone setting is on.There are new messages.To temporarily turn off the message alert tone, see Temporarily turning off the message alert tone on page 48.1.2.3.4.5.6.1.2.3.4.•–––•REMOTE CODE19MSG ALERT TONEON
22Telephone settingsTelephone base ringer volumeUse the following step to set the ringer volume level (1-6), or turn the ringer off.When the telephone is not in use, press VOLUMEon the telephone base to adjust the ringer volume. A sample of the ringer sounds as you adjust the volume. The telephone base announces, “Base ringer is off” when you set the volume to 0.•
23Making, answering and ending a callTelephone operationMaking a callTo make a call:Press PHONE/FLASH, then wait for the dial tone.-OR-Press SPEAKER to use the speakerphone, then wait for the dial tone.Use the dial pad keys to enter the telephone number.On-hook dialing (predialing):Use the dial pad keys to enter the telephone number.Press REDIAL/PAUSE to insert a three-second dialing pause.Press MUTE/DELETE to make corrections.Press PHONE/FLASH to call.-OR-Press SPEAKER to call using the speakerphone.-OR-Press and hold OFF/CLEAR to return to the idle mode.NOTE: Pressing PHONE/FLASH to access services from your telephone service provider does not affect the elapsed time.Temporary ringer silencingWhile the telephone is ringing, press OFF/CLEAR or MUTE/DELETE to silence the ringer temporarily on that handset only.This turns off the ringer without disconnecting the call. The next incoming call rings normally at the preset volume.NOTE: Unless the ringer volume is turned off on that handset, each handset rings when there is an incoming call.Answering a callPress any dial pad key (also known as Any Key Answer) or PHONE/FLASH.-OR-Press SPEAKER to use the speakerphone.1.2.1.••2.••PHONE 0:01:30 888-722-7702The screen displays the elapsed time as you talk (in hours, minutes and seconds).888-722-7702RINGER MUTE
24Telephone operationSpeakerphoneDuring a call, press SPEAKER to switch between speakerphone and normal handset use.Press OFF/CLEAR to hang up.NOTES:The speakerphone uses more power than the normal handset. If the handset battery becomes very low while you are using the speakerphone, the call remains in speakerphone mode until you hang up or the battery becomes depleted. When the battery is very low, you cannot switch a call from normal handset use to speakerphone mode.If you use the speakerphone during LOW BATTERY mode, the handset is not lit except for the SPEAKER button.After installing the battery in the handset, the screen may show LOW BATTERY. If you use speakerphone at this time, the battery may become depleted. Follow the instructions in Battery installation and charging on page 8.Ending a callPress OFF/CLEAR.-OR-Put the handset in the telephone base or charger to end the call automatically (also known as Auto Off).•••••Making, answering and ending a callSPEAKER 0:01:30 888-722-7702
25Telephone operationOptions while on callsVolume controlWhile on a call, press DIR/VOLUME to increase or press CID/VOLUME to decrease the listening volume.When the volume reaches the minimum or maximum setting, you hear two beeps.NOTE: The handset earpiece volume setting (1-5) and speakerphone volume setting (1-6) are independent.MuteUse the mute function to turn off the microphone. You can hear the caller, but the caller does not hear you.To mute the call:Press MUTE/DELETE. When mute is on, the handset screen shows MUTED for a few seconds and the MUTE icon appears until you turn off mute.To un-mute the call:Press MUTE/DELETE and then resume speaking. When mute is off, MICROPHONE ON appears temporarily on the handset screen.-OR-Mute is automatically canceled when you end the call.Flash/call waitingFor more information on caller ID with call waiting, refer to About caller ID on page 40. If you subscribe to call waiting service provided by your telephone service provider, you hear a beep if someone calls you while you are already on a call.Press PHONE/FLASH to put your current call on hold and take the new call.Press PHONE/FLASH anytime to switch back and forth between calls.NOTES:Press PHONE/FLASH to access other telephone service provider subscriber services, as described by your telephone service provider.The telephone cannot display the information if another telephone on the same line is in use. Make sure all extensions are not in use.••••••PHONE 0:01:30MUTED
26Telephone operationOptions while on callsTemporary tone dialingIf you have dial-pulse (rotary) dialing service only, use this feature to temporarily switch from dial-pulse to touch-tone dialing during a call.Dial the number during a call.Press TONE . The telephone sends touch-tone signals.The telephone automatically returns to pulse dial mode after you end the call.Chain dialingUse this feature to dial numbers stored in the directory or caller ID history while you are on a call.Chain dialing is useful if you need to access numbers other than telephone numbers (such as bank account numbers or access codes) from the directory or caller ID history.To access the directory while on a call:Press MENU/SELECT.Press DIR or CID to scroll to >DIRECTORY, then press MENU/SELECT.Press DIR or CID to scroll or press the dial pad keys to find the desired entry (see To search by name on page 35).Press MENU/SELECT. The telephone automatically dials the displayed number.To access the caller ID history while on a call:Press MENU/SELECT.Press DIR or CID to scroll to >CALL LOG, then press MENU/SELECT.Press DIR or CID to scroll to the desired entry. (If necessary, refer to step 2 in To view the dialing options on page 43.)Press MENU/SELECT. The telephone automatically dials the displayed number.1.2.3.•1.2.3.4.•1.2.3.4.PHONE 0:01:30 888-722-7702>DIRECTORYCALL LOGCharlie Johnson888-883-244511/20ROBERT BROWN800-360-4121 8:30PM
27Telephone operationOptions while on callsTo access the redial list while on a call:Press REDIAL/PAUSE.Press DIR or CID to scroll to the number you want to dial.Press MENU/SELECT. The handset automatically dials the displayed number.NOTES:While on a call, you cannot edit a directory entry or copy a caller ID entry into the directory.If the directory or caller ID history is in use, the screen shows NOT AVAILABLE AT THIS TIME.Press and hold OFF/CLEAR to exit directory, caller ID history or redial list and return to the call without dialing the displayed number.Join a call in processIf a handset is already on a call and you would like to join the call:Press PHONE/FLASH or SPEAKER on another system handset.To exit the call:Press OFF/CLEAR or place the handset in the telephone base or charger.The call is terminated once all handsets hang up.NOTE: You can only use two system handsets at the same time on an outside call.•1.2.3.•••••REDIAL 888-722-7702
28Telephone operationRedialThe handset can store the 20 numbers recently called from this handset in the redial list.To review numbers in the redial listPress REDIAL/PAUSE in idle mode.Press DIR or CID to scroll through the 20 recently called numbers (up to 30 digits each). The handset beeps twice at the beginning or end of the list.Press OFF/CLEAR to exit the redial list.To call a number from the redial listUse the steps 1 and 2 in To review numbers in the redial list on this page to scroll to the desired number.Press PHONE/FLASH.-OR-Press SPEAKER to use the speakerphone.To delete a number in the redial listUse the steps 1 and 2 in To review numbers in the redial list on this page to scroll to a number.Press MUTE/DELETE to delete the displayed number from the redial list.To call the number most recently called (last number redial)Press PHONE/FLASH, then wait for the dial tone.-OR-Press SPEAKER to use the speakerphone, then wait for the dial tone.Press REDIAL/PAUSE The screen shows the number most recently called.Press MENU/SELECT. The handset automatically dials the displayed number.-OR-Wait at least two seconds. The handset automatically dials the displayed number.-OR-Press and hold OFF/CLEAR to return to the call without dialing the number most recently called.1.2.3.1.2.1.2.1.2.3.REDIAL 888-722-7702REDIAL 888-722-7702PHONE 0:00:10PHONE 0:00:18888-722-7702
29Telephone operationThe handset locator feature is useful if you misplace any handsets.To start the paging tone:Press HANDSET LOCATOR on the telephone base to start the paging tone on all handsets for 60 seconds.To stop the paging tone:Press PHONE/FLASH,SPEAKER, or any dial pad key (0-9, , or #) on the handset(s).-OR-Press HANDSET LOCATOR on the telephone base.NOTE: If you press OFF/CLEAR or MUTE/DELETE on a handset, the ringer of the handset is silenced but the paging tone continues.•••Handset locator
30Telephone operationTo make and answer an intercom callUse the intercom feature for conversation between handsets.Press INT on your handset when not in use.If you have a two-handset system (EL52200), your handset screen shows CALLING OTHER HANDSET.If you have more than two handsets (EL52300 or EL52400), your screen shows INTERCOM TO: Use the dialing keys (1-3 or 1-4) to select the other handset. Your handset screen shows CALLING HANDSET X.The other handset rings and its screen shows either OTHER HANDSET IS CALLING (EL52200) or HANDSET X IS CALLING (EL52300 or EL52400).To answer the intercom call, press PHONE/FLASH,SPEAKER,INT, or any dial pad keys (0-9, #, ) on the other handset. Both handsets now show INTERCOM.To end an intercom call, press INT,OFF/CLEAR, or place the handset back in the telephone base or charger. Both handsets now show INTERCOM ENDED.NOTES:Before the intercom call is answered, you can cancel the intercom call by pressing OFF/CLEAR or INT on your originating handset.If the other handset is not answered within 60 seconds or if it is in the directory or caller ID history mode, or is on a call, or is out of range, your originating handset shows UNABLE TO CALL TRY AGAIN.Pressing OFF/CLEAR or MUTE/DELETE temporarily silences the intercom ringer.You can use a maximum of four handsets at a time. When two handsets are used on an intercom call, use two other system handsets for an outside call or another intercom call.To answer an incoming call during an intercom callIf you receive an incoming outside call during an intercom call, there is an alert tone.To answer the call:Press PHONE/FLASH. The intercom call ends automatically.To end the intercom call without canceling the incoming call:Press OFF/CLEAR.To let the answering system answer the incoming call:Do nothing. If the answering system is on, it answers the incoming call after the number of rings you have set.1.•••2.3.•••••••IntercomINTERCOM TO:CALLINGHANDSET XINTERCOM
31Telephone operationCall transfer using intercomUse the intercom feature to transfer an outside call to another system handset.During a call, press INT.If you have a two-handset system (EL52200), the outside call is put on hold and your handset screen shows CALLING OTHER HANDSET. The other handset rings and its screen shows OTHER HANDSET IS CALLING.If you have more than two handsets (EL52300 or EL52400), your screen shows TRANSFER TO: Use the dial pad keys to enter a handset number. The outside call is put on hold and your handset screen shows CALLING HANDSET X. The other handset rings and its screen shows HANDSET X IS CALLING.To answer the intercom call on the other handset, press PHONE/FLASH,SPEAKER,INT, or any dial pad keys (0-9, #, ). The outside call is still on hold and both handsets now show INTERCOM. You can now have a private conversation between the system handsets.NOTES:To cancel the transfer and return to the external call before the intercom call is answered, press and hold OFF/CLEAR, or press PHONE/FLASH or INT on your handset.If the other handset does not answer the intercom call within 60 seconds, or if the other handset is in the directory or caller ID history mode, or is out of range, the calling handset shows UNABLE TO CALL TRY AGAIN on its screen and automatically returns to the external call.From this intercom call, you have the following options:You can let the other handset join you on the outside call in a three-way conversation. Press and hold INT on the calling handset.You can transfer the call. Press OFF/CLEAR, or place your handset back in the telephone base or charger. Your screen shows CALL TRANSFERED. The other handset automatically connects to the outside call.You can switch between the outside call (OUTSIDE CALLappears on the screen) and the intercom call (INTERCOM appears on the screen). Press INT on your handset to switch.The other person can end the intercom call by pressing OFF/CLEAR,or by placing the other handset back in the telephone base or charger. The outside call continues with the original system handset.1.••2.••3.••••TRANSFER TO:CALLINGHANDSET XINTERCOMPHONE 0:00:20CALL TRANSFERED
32Directory overviewShared directoryThe directory is stored in the telephone base, and is shared by all handsets. Changes made to the directory on any one handset apply to all.NOTE: Only one handset can review the directory at a time. If another handset attempts to enter the directory, the screen shows NOT AVAILABLE AT THIS TIME.Directory memory capacityThe directory can store up to 100 entries, with a maximum of 15 alphanumeric characters (including spaces) for the names and 30 digits for the telephone numbers. A convenient search feature can help you find and dial numbers quickly (see To search by name on page 35).If there are already 100 entries, the screen shows LIST FULL.You cannot store a new number until you delete one.If the directory is empty, when you access it, the screen shows DIRECTORY EMPTY.Exiting the directoryPress OFF/CLEAR to cancel an operation, back up to the previous menu, or exit the menu display. Press and holdOFF/CLEAR to return to the idle mode.If you pause for too long while creating or reviewing an entry, the procedure times out and you have to begin again.Speed dial overviewThis telephone has 10 speed dial locations where you can assign telephone numbers from the directory you wish to dial numbers using fewer keys than usual. For more details, refer to Speed dial locations on page 38.If a directory entry is also in a speed dial location, while reviewing the directory, the number of speed dial location will be with that directory entry.The speed dial locations are in the telephone base and is shared by all handsets. Changes made to the entries in the speed dial locations on any one handset apply to all.NOTE: Only one handset can access the speed dial locations at a time. If another handset attempts to access the speed dial locations, the screen shows NOT AVAILABLE AT THIS TIME.DirectoryCharlie Johnson888-883-2445LIST FULL07Charlie Johnson888-883-2445Indicates this directory entry is also in the seventh speed dial location.
33DirectoryDirectory storagePress MENU/SELECT in idle mode to use the main menu.-OR-You can also store a number in the directory while predialing. Do the following:While the handset is in idle mode, use the dial pad keys to enter the telephone number (up to 30 digits).Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a P appears).Press MUTE/DELETE to make corrections.Skip to step 6.Press DIR or CID to scroll to >DIRECTORY, then press MENU/SELECT.Press DIR or CID to highlight >ADD CONTACT.Press MENU/SELECT.Enter the telephone number when prompted.Copy a number from redial:Press REDIAL/PAUSE.Press DIR or CID or press REDIAL/PAUSE repeatedly to locate the number to copy.Press MENU/SELECT to copy the number.-OR-Use the dial pad keys to enter a number (up to 30 digits).Press DIR or CID to move the cursor to the left or right.Press and hold REDIAL/PAUSE to enter a three-second dialing pause(a P appears).Press MUTE/DELETE to erase digits.Press and hold MUTE/DELETE to erase all digits.Press MENU/SELECT to save the number in the display.Enter the name when prompted. Use the dial pad keys and refer to Character chart on page 34 to enter a name (up to 15 characters). Each time you press a key, the character on that key appears. Additional key presses produce other characters on that key.Press # to add a space.Press DIR or CID to move the cursor to the left or right.Press MUTE/DELETE to erase characters.Press and hold MUTE/DELETE to erase all characters.1.a.••b.2.3.4.5.•a.b.c.•––––6.7.••••ENTER NUMBER888-883-2445_ENTER NAMECharlie Johnson_
34DirectoryCharacter chart:DialKeyCharacters by number of key press12345678910111.-‘() #&/ , 12ABCabc 23DEFde f 34GH I gh i 45JKL j kl 56MNOmn o 67PQRS pq r s 78TUV t uv89WX Y Zw x y z 900#spaceNOTE: The first letter of every word is capitalized. The remaining letters in a word start as lower case letters shown in the chart above.Press MENU/SELECT to store your new directory entry. The screen shows SAVED and then SET SPEED DIAL?Press MENU/SELECT to assign a speed dial location to this entry.-OR-Press OFF/CLEAR to store the entry in the directory without assigning a speed dial location to this entry (skip the following steps). You can assign it later (see To assign or reassign a speed dial location to a directory entry on page 38).Press DIR or CID to scroll to an empty speed dial location.Press MENU/SELECT to confirm. The new entry appears.NOTE: The screen shows ALREADY SAVED if the number is already in the directory. You cannot save the same number.•8.9.10.11.>1: <EMPTY>2: Robert Brown01Charlie Johnson888-883-2445Directory storage
35DirectoryReviewing the directoryTo review directory entriesPress DIR when in idle mode to show the first entry in the directory. DIRECTORY EMPTY appears if there are no directory entries.-OR-You can also show the first entry in the directory by pressing MENU/SELECT when in idle mode. Press DIR or CID to scroll to >DIRECTORY, then press MENU/SELECT twice.Press DIR or CID to browse through the directory. Entries appear alphabetically by the first letter in the name.NOTE: If the telephone number in the directory exceeds 15 digits, < appears in front of the telephone number. Press TONE to move towards the end of the telephone number or press # to move towards the beginning of the telephone number.To search by namePress DIR when in idle mode to show the first entry in the directory.When an entry appears, press the dial pad keys (2-9) to start a name search (alphabetical search).The directory shows the first name beginning with the first letter associated with the dial pad key if there is an entry in the directory that begins with that letter.To see other names that start with the letters on the same dial pad key, keep pressing the key. The names appear in alphabetical order.For example, if you have the names Jennifer, Jessie, Kevin and Linda in your directory:If you press 5 (JKL) once, Jennifer displays.If you press 5 (JKL) twice, Jessie displays.If you press 5 (JKL) three times, Kevin displays.If you press 5 (JKL) four times, Linda displays.If you press 5 (JKL) five times, Jennifer displays again.NOTES:If there is no name matching the first letter of the key you press, the directory shows a name that matches the following letters of the key.If you press a key (2-9) and no name starts with the letters on that key, the directory shows the entry that matches the next letter in the directory.1.2.1.2.3.•••••••Christine Smith888-722-770201Charlie Johnson888-883-244501Charlie Johnson888-883-2445
36DirectoryTo dial a directory numberPress DIR when in idle mode.Press DIR or CID to browse through the directory and find the desired entry.-OR-Use the alphabetical search to find the desired entry. Refer to steps 2 and 3 in To search by name on page 35.Press PHONE/FLASH or SPEAKER to dial the displayed telephone number from the directory.To delete a directory entryFollow steps 1 and 2 in To dial a directory number on this page to find the entry.Press MUTE/DELETE. The screen shows DELETE CONTACT?Press MENU/SELECT to delete the displayed entry from the directory. Once deleted, you cannot retrieve that entry.-OR-Press OFF/CLEAR to exit and leave the entry intact.NOTE: If the directory entry you deleted is also in the speed dial location, the telephone will automatically clear the speed dial location that entry occupied.To edit a directory entryFollow steps 1 and 2 in To dial a directory number on this page to find the desired entry.Press MENU/SELECT to modify the entry. To edit the name, press DIR or CID to scroll to >NAME.Press MENU/SELECT to show EDIT NAME. Follow step 7 in Directory storage on page 33 to edit the characters.-OR-To edit the number, press DIR or CID to scroll to >NUMBER. Press MENU/SELECT to show EDIT NUMBER.Follow step 5 in Directory storage on page 33 to edit the digits.1.2.3.1.2.3.1.2.3.Dialing, deleting and editing a directory entryRobert Brown800-360-4121PHONE 0:00:20Robert BrownRobert Brown800-360-4121EDIT>NAMEEDIT>NUMBER01Charlie Johnson888-883-2445
37Directory-OR-To assign or reassign a speed dial location, press DIRor CID to scroll to >SPEED DIAL. Press MENU/SELECT to show the speed dial list. Do the following:To assign a speed dial location to this entry, press DIR or CID to scroll to an empty speed dial location.-OR-To reassign another speed dial location to this entry, press DIR or CIDto scroll to another speed dial location. Press MENU/SELECT. The screen shows REPLACE?Press MENU/SELECT to confirm. The screen shows the updated entry.••4.Dialing, deleting and editing a directory entryEDIT>SPEED DIAL07Charlie883-2445
38DirectorySpeed dial locationsTo assign or reassign a speed dial location to a directory entryWhile reviewing the directory, you can use the steps in To edit a directory entryon page 36 to assign or reassign a speed dial location to a directory entry.You can also follow the steps below to use the main menu to assign or reassign a speed dial location to a directory entry.Press MENU/SELECT in idle mode.Press DIR or CID to scroll to >DIRECTORY. Press MENU/SELECT.Press DIR or CID to scroll to >SPEED DIAL. Press MENU/SELECT.To assign a speed dial location, press DIR or CID to scroll to an empty speed dial location.-OR-To reassign another speed dial location, press DIR or CID to scroll to another speed dial location.Press MENU/SELECT to show the directory.Press DIR or CID to browse through the directory and find the desired entry.-OR-Use the alphabetical search to find the desired entry. Refer to steps 2 and 3 in To search by name on page 35.Press MENU/SELECT to confirm. The name (up to 12 characters) of the desired directory entry appears in the selected speed dial location.Press OFF/CLEAR to return to idle mode or repeat steps 4-7 to fill in other speed dial locations.NOTES:If the directory is empty, when you press MENU/SELECT in step 5, the screen shows DIRECTORY EMPTY.If the speed dial location you selected is occupied, the new directory entry you selected replaces the old one. Take caution not to replace entries you do not wish to delete from the speed dial locations.1.2.3.4.5.6.7.8.••>SPEED DIALREVIEW>1: <EMPTY>2: Robert BrownCharlie Johnson888-883-2445>1: Charlie John2: Robert Brown
39DirectoryTo clear a speed dial locationPress MENU/SELECT in idle mode.Press DIR or CID to scroll to >DIRECTORY. Press MENU/SELECT.Press DIR or CID to scroll to >SPEED DIAL. Press MENU/SELECT.Press DIR or CID to scroll to a speed dial location.Press MUTE/DELETE. The screen shows UNASSIGN?Press MENU/SELECT to confirm and clear the selected speed dial location. <EMPTY> appears in that speed dial location.NOTE: Clearing the speed dial locations does not affect the entries in the directory.To dial a speed dial numberWhen in idle mode, press and hold a dial pad key (0 through 9)to choose the desired speed dial location and show the entry in it.Press PHONE/FLASH or SPEAKER to dial the displayed telephone number.NOTE: If the speed dial location you selected is empty, the screen shows the speed dial location with <EMPTY> in the speed dial list.1.2.3.4.5.6.1.2.Speed dial locationsCharlie JohnUNASSIGN?>1: <EMPTY>2: Robert Brown>1: Charlie John2: Robert Brown
40Caller ID overviewAbout caller IDThis product supports caller ID services provided by most telephone service providers. Depending on your service subscription, you may see the caller’s number, or the caller’s name and number that are sent by the telephone service provider after the first or second ring. Caller ID allows you to see the name, number, date and time of calls.Information about caller ID with call waiting:Caller ID with call waiting lets you see the name and telephone number of the caller before answering the call, even while on another call. It may be necessary to change your telephone service to use this feature. Contact your telephone service provider if:You have both caller ID and call waiting, but as separate services (you may need to combine these services).You have only caller ID service, or only call waiting service.You don’t subscribe to caller ID or call waiting services.There are fees for caller ID services. In addition, services may not be available in all areas.This product can provide information only if both you and the caller are in areas offering caller ID service and if both telephone service providers use compatible equipment. The time and date are sent by the telephone service provider along with the call information.The caller ID information may not be available for every incoming call. The callers may intentionally block their names and/or telephone numbers.NOTE: You can use this product with regular caller ID service, or you can use this product’s other features without subscribing to either caller ID or combined caller ID with call waiting service.About home area codeSee Home area code on page 17 to determine if you should enter your area code. Entering the area code changes how numbers are displayed in the caller ID history and makes returning a call from the caller ID history easier (see To dial a number from caller ID history on page 44).•••Caller ID operation11/20Christine Smith888-722-770210:30PM
41Caller ID operationHow caller ID history (call log) worksThe telephone stores caller ID information about the last 50 incoming calls in the telephone base. Entries are stored in reverse chronological order. The telephone deletes the oldest entry when the log is full to make room for new calls. This information is common to all handsets, so changes made in any handset are reflected in all other handsets. If you answer a call before the information appears on the screen, it does not show in the caller ID history.Review the caller ID history to find out who called, to easily return the call, or to copy the caller’s name and number into your directory.XX NEW CALL(S) appears if there are new caller ID history entries (including missed and unreviewed calls). CALLLOG EMPTY appears if there are no records in the caller ID history.NOTES:Only one handset can review the caller ID history at a time. If another handset attempts to enter the caller ID history, it shows NOT AVAILABLE AT THIS TIME.Each entry may have up to 24 digits for the telephone number and 15 characters for the name. If the telephone number has more than 15 digits, only the last 15 digits appear. The caller ID information might not be available for every incoming call. The callers might intentionally block their names and/or telephone numbers.Memory matchIf the incoming telephone number is an exact match with a telephone number in your directory, the name that appears on the screen matches the corresponding name in your directory.For example, if Christine Smith calls, her name appears as Chris if this is how you entered into your directory.NOTE: The number shown by your caller ID is in the format sent by the telephone service provider. The telephone service provider usually delivers ten-digit telephone numbers (area code plus telephone number). If the telephone number of the caller does not exactly match a number in your directory, the name appears as it is delivered by the telephone service provider. For example, if the telephone service provider includes the area code and the directory number does not, the name appears as delivered by the telephone service provider.•••Caller ID overviewCaller’s nameCaller’s numberAppears when the call is missed and unreviewed.Date of callTime of call11/20Christine Smith888-722-770210:30PM11/20Chris888-722-770210:30PM
42Caller ID operationMissed (new) calls indicatorWhen a handset is in idle mode and has calls that have not been reviewed, its screen shows XX MISSED CALLS.All unreviewed entries are counted as missed (new) calls. Each time you review a caller ID history entry marked NEW,the number of missed (new) calls decreases by one.If you do not want to review the missed (new) calls one by one, but you still want to keep them in the caller ID history, you can press and hold OFF/CLEAR for four seconds when the handset is idle. All the entries in the caller ID history are considered old (reviewed), and the missed (new) calls counter is reset to 0.Reasons for missing caller ID informationThere are also occasions when other information or no information shows for various reasons:On-screen message ReasonPRIVATE NAME The caller prefers not to show the telephone name.PRIVATE NUMBER The caller prefers not to show the telephone number.PRIVATE CALLER The caller prefers not to show the name and the telephone number.UNKNOWN NAME Your telephone service provider cannot determine the caller’s name.UNKNOWN NUMBER Your telephone service provider cannot determine the caller’s telephone number.UNKNOWN CALLER Your telephone service provider cannot determine the caller’s name and telephone number. Calls from other countries may also generate this message.11/20HANDSET 116 MISSED CALLS10:30PM11/20HANDSET 110:30PMCaller ID overview
43Caller ID operationReviewing call historyTo review the caller ID historyWhen a handset is in idle mode, press CID to review the caller ID history in reverse chronological order starting with the most recent call.-OR-You can also review the caller ID history by pressing MENU/SELECT, then press DIR or CID to scroll to >CALL LOG, then press MENU/SELECT twice.Press DIR or CID to scroll through the list. A double beep sounds when the list reaches the beginning or end of the caller ID history.Press OFF/CLEAR to exit the caller ID history.To view the dialing optionsAlthough the caller ID history entries received typically have 10 digits (the area code plus the seven-digit number), in some areas, you might need to dial only the seven digits, or 1 plus the seven digits, or 1 plus the area code plus the seven digits. You can follow the steps below to change the number of digits that you dial from or store in the directory:Follow steps 1 and 2 in To review the caller ID history on this page to find the entry.Before dialing or saving the telephone number in the directory, press # repeatedly to show different dialing options for local and long distance numbers.-OR-Before dialing or saving the telephone number in the directory, press 1 repeatedly if you need to add or remove 1 in front of the telephone number.NOTE: If you do not need to dial the area code for local calls, make sure to program your home area code (see Home area code on page 17).1.2.3.1.2.11/20Christine Smith888-722-770211:30PM11/20Robert Brown800-360-412110:45PMPress # -> 1-800-360-4121Press # -> 360-4121Press # -> 1-360-4121Press # -> 800-360-4121Press 1 -> 1-800-360-4121Press 1 -> 800-360-412111/20Robert Brown800-360-412110:45PM
44Caller ID operationReturning a call and deleting an entryTo dial a number from caller ID historyPress CID when in idle mode.Press DIR or CID to browse through the caller ID history and find the entry.Press PHONE/FLASH or SPEAKER to dial the displayed telephone number from the caller ID history.-OR-If you need to add or remove the area code or a 1 at the beginning of the number, do the following:Press # or 1. For details, refer to step 2 in To view the dialing options on page 43.Press PHONE/FLASH or SPEAKER to dial the displayed telephone number.To delete an entry from caller ID historyPress CID when in idle mode.Press DIR or CID to browse through the caller ID history and find the entry.Press MUTE/DELETE to delete the displayed entry from the caller ID history. Once deleted, you cannot retrieve that entry.To delete all entries from caller ID historyPress MENU/SELECT in idle mode.Press DIR or CID to scroll to >CALL LOG. Press MENU/SELECT.Press DIR or CID to scroll to >DEL ALL CALLS. Press MENU/SELECT. The screen shows DELETE ALL CALLS?Press MENU/SELECT to delete all entries from the caller ID history. Once deleted, you cannot retrieve an entry.-OR-Press OFF/CLEAR to exit and leave all entries in the caller ID history intact.1.2.3.a.b.1.2.3.1.2.3.4.11/20Christine Smith888-722-770210:30PMPHONE 0:01:30 722-7702>DEL ALL CALLSREVIEWDELETE ALL CALLS?
45Caller ID operationSaving a caller ID history entry in the directoryPress CID when in idle mode.Press DIR or CID to browse through the caller ID history and find the desired entry.If you need to add or remove the area code or a 1 at the beginning of the number, press # or 1. For details, refer to step 2 in To view the dialing options on page 43.Press MENU/SELECT. The screen shows EDIT NUMBER.Use the dial pad keys to modify the telephone number (up to 30 digits).Press DIR or CID to move the cursor to the left or right.Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a P appears).Press MUTE/DELETE to erase digits.Press and hold MUTE/DELETE to erase all digits.Press MENU/SELECT to save the number in the display. The screen shows EDIT NAME.Use the dial pad keys and refer to Character chart on page 34 to modify the name (up to 15 characters).Press # to add a space.Press DIR or CID to move the cursor to the left or right.Press MUTE/DELETE to erase characters.Press and hold MUTE/DELETE to erase all characters.Press MENU/SELECT to confirm.NOTES:The screen shows ALREADY SAVED if the number is already in the directory. You cannot save the same number.If the directory is full, the screen shows LIST FULL.If neither the name nor number is provided, UNABLE TO SAVE appears.1.2.•3.4.••••5.6.••••7.•••11/20Christine Smith888-722-770210:30PMEDIT NUMBER722-7702_EDIT NAMEChris_
46Answering system operationAnswering system and voicemailYour telephone has separate indicators for two different types of voice messages: those left on its built-in answering system and those left at your service provider’s voicemail (fees may apply). Your telephone’s built-in answering system messages and voicemail messages are separate. Each alerts you to new messages differently.If and NEW VOICEMAIL display on the handset, your telephone service provider is indicating that it has new voicemail for you. To listen to your voicemail, you typically dial an access number provided by your telephone service provider, followed by a security code or PIN.To listen to messages recorded on your digital answering system, press PLAY/STOP on the telephone base (see Message playback on page 49).Some service providers bundle or combine multiple services like voicemail and call waiting, so you may not be aware that you have voicemail. To check what services you have and how to access them, contact your telephone service provider.You can use your telephone answering system and voicemail together by setting your built-in answering system to answer before voicemail answers. To learn how to program your voicemail settings, contact your telephone service provider. If you are on a call, or if the answering system is busy recording a message and you receive another call, the second caller can leave a voicemail message by following the instructions below.Set your answering system to answer calls at least two rings earlier than your voicemail is set to answer. For example, if your voicemail answers after six rings, set your answering system to answer after four rings. Some voicemail providers may program the delay before answering calls in seconds instead of rings. In this case, allow six seconds per ring when determining the appropriate setting.••
47Answering system operationAnswering system overviewVoice promptsThe system provides voice prompts to guide you through recording outgoing announcements and remote access.Turning the answering system on or off at the telephone basePress ANSWER ON/OFF to turn the answering system on or off. If the answering system is turned on, it announces “Calls will be answered.” If the answering system is turned off, it announces “Callswill not be answered.”If the answering system is on, the ANS ON icon displays on the handset screen and the ANSWER ON/OFFlight on the telephone base is on.NOTES:If the answering system is off and there is an incoming call, the system answers after 10 rings and announces to the caller, “Please enter your remote access code.” For more information about remote access, see Remote access on page 53.You can also turn the answering system on or off from the handset. Refer to Answering modeon page 18 for details.Message capacityThe answering system can record up to 99 messages, depending on the length of each message. Individual messages can be up to four minutes, and the approximate recording time is 14 minutes. The actual recording time depends on individual message characteristics. Messages remain available for replay until you delete them.If the answering system has less than five minutes of recording time left, the remaining time is announced at the end of messages playback.If the memory is full, the number of message and F are flashing alternatively in the message window, and REC MEM FULL appears on the handset screen. You must delete some messages before recording new ones.New message indicationWhen there are new messages (including memos) on the answering system, the number of messages stored flashes in the message window on the telephone base and the icon and XX NEW MESSAGES appear on the screen of each system handset. If the new message alert tone is turned on, the telephone base beeps every 10 seconds when there are new messages.•••11/20HANDSET 116 NEW MESSAGES10:30PM
48Answering system operationCall screeningIf CALL SCREENING is ON (see Call screening setupon page 20), the incoming messages on your telephone are played through the speaker on the telephone base while they are being recorded.While call screening, to adjust the playback volume to a comfortable level (1-8):Press VOLUME on the telephone base.Call interceptWhile call screening, you can press PHONE/FLASH orSPEAKER on the handset to stop recording and speak to the caller.Temporarily turning off the message alert toneFollow the step below to temporarily silence the message alert tone:When the telephone base is in idle mode, press any telephone base key (except HANDSET LOCATOR).The message alert tone is re-activated with the next incoming message.NOTE: When the telephone base is in idle mode, if you press DELETE to temporarily silences the message alert tone, there is a voice prompt to direct you to press DELETEagain to delete all old messages (see To delete all old messages on page 50). If you are not going to delete all old messages, wait at least 5 seconds to allow the telephone base to return to idle mode.••Answering system overview
49Answering system operationMessage playbackTo listen to messagesIf there are new messages, the system plays back only the new messages (oldest first). If there are no new messages, the system plays back all old messages (oldest first).When playback begins, the total number of messages is announced. Before each message, you hear the day and time it was received. After the last message, you hear “End of messages.” If the system has less than five minutes of recording time left, you hear the remaining time.NOTE: If the date and time is not set when a message is recorded, the system announces, “Time and date not set” before the message is played. To set the date and time, see Set date/time on page 16.To listen to messages at the handset:Press MENU/SELECT when in idle mode to enter the main menu.Press DIR or CID to scroll to >ANSWERING SYS, then press MENU/SELECT twice to select >PLAY MESSAGES.-OR-To play back the new messages only, press MENU/SELECTto select >PLAY NEW MSGS.The system announces the number of messages, then begins playback. The message sequence is shown on the handset’s screen. Options during message playback:Press DIR/VOLUME to increase or press CID/VOLUME to decrease the message playback volume.Press SPEAKER to switch between speakerphone and handset earpiece.Press 4 to repeat the message. Press twice to hear the previous message.Press 6 to skip to the next message.Press 3 to delete the message.Press 5 to stop the playback.NOTE: If there is no message in the answering system, the screen shows NO MESSAGES when in step 2 above.1.2.3.••••••MSG # 1/163-DELETE 5-STOP4-REPEAT 6-SKIP10:30PM
50Answering system operationMessage playbackTo listen to messages at the telephone base:Press PLAY/STOP on the telephone base to listen to the messages.The system announces the number of messages, then begins playback. The message sequence is shown on the message window. Options during message playback:Press VOLUME to adjust the message playback volume (1-8).Press REPEAT to repeat the message. Press twice to hear the previous message.Press SKIP to skip to the next message.Press DELETE to delete the message.Press PLAY/STOP to stop the playback.NOTE: If there is no message in the answering system, when in step 2 above, the system announces, “You have no messages.”To delete all old messagesUse this feature to delete all old messages. Once deleted, you cannot retrieve the deleted messages. New (unheard) messages cannot be deleted until you have listened to them.To delete all old messages at the handset:Press MENU/SELECT when in idle mode to enter the main menu.Press DIR or CID to scroll to >ANSWERING SYS, then press MENU/SELECT.Press DIR or CID to scroll to select >DELETE ALL OLD.Press MENU/SELECT. The screen shows DELETE ALL OLD MSGS?Press MENU/SELECT to confirm. The screen shows ALL OLD MSGS DELETED!and a confirmation tone sounds.-OR-Press OFF/CLEAR to exit and leave all old messages intact.To delete all old messages at the telephone base:Press DELETE on the telephone base. The system announces, “To delete all old messages, press DELETE again.”Press DELETE within five seconds. The system announces, “All old messages deleted.”1.2.•••••1.2.3.4.5.1.2.>DELETE ALL OLDRECORD MEMO
51Answering system operationRecording and playing memoMemos are messages you record yourself. They are saved, played back and deleted exactly like incoming messages. You can record a memo as a reminder to yourself, or leave a message for someone else using the same telephone.To record a memoUse the following steps to record a memo.Press MENU/SELECT when in idle mode to enter the main menu.Press DIR or CID to scroll to >ANSWERING SYS, then press MENU/SELECT.Press DIR or CID to scroll to >RECORD MEMO.Press MENU/SELECT. The system announces, “Record after the tone. Press 5 when you are done.”Speak towards the microphone on the handset after a long beep. You can record a memo up to four minutes. Memos shorter than two seconds are not recorded.Press 5 to stop recording. The system announces, “Recorded“ to confirm the recording has finished.NOTE: If the answering system memory is full, when you press MENU/SELECT in step 4, the answering system announces, “Memory is full.”To play back memosMemos are stored as messages. See Message playback on page 49 for instructions on playback and deletion.1.2.3.4.5.6.RECORD MEMO...5-STOP
52Answering system operationMessage window displaysThe message window displays the total number of messages. See the table below for other message window displays.0No messages.0-99(flashing)Total number of messages and memos. The number flashes when there are new (unreviewed) messages.After a power failure, the number in the message window flashes to indicate the clock needs to be set.••1-99 Total number of messages and memos.Current message number during old message playback.••1-99(flashing)Total number of messages and memos. The number flashes when there are new (unreviewed) messages.Current message number during new message playback.••1-99 and F(alternating)Memory is full. Messages must be deleted before new messages can be recorded.-- A system handset is on a call.The answering system is being programmed by a system handset.The answering system is answering a call or recording a memo or announcement.The answering system is being accessed remotely.••••0-6Telephone base ringer volume while adjusting.1-8Speaker volume level of the telephone base while adjusting.
53Answering system operationRemote accessUse the remote access feature to access the answering system remotely by dialing your home telephone number from any touch-tone telephone.To remotely access the answering systemDial your telephone number from any touch-tone telephone.When the answering system answers, enter the two-digit remote access code (19, unless you have changed it; refer to Remote access code on page 21). The answering system automatically announces the number of messages (new and/or old) if there are any.If there are new messages, the answering system automatically begins to play them.-OR-If there are no new messages, the answering system automatically plays a list of remote commands (help menu).You can also enter the remote commands:Play back all messages1Press to listen to all messages. If there are new messages, the system plays back only the new messages (oldest first). If there are no new messages, the system plays back all old messages (oldest first).Play back new messages2Press to listen to new messages only.Delete a message3Press during a message playback to delete the current message.Delete all old messages33Press to delete all old messages.Replay current message4Press during a message playback to repeat the current message.Replay previous message4 4Press to listen to the previous message.Stop5Press to stop playback and recording.Play back help menu* 5Press to listen to a list of remote commands.Skip to next message6Press during playback to skip the current message and advance to the next message.Record a announcement* 7Press to record a new announcement.Turn system on or off0Press to turn the answering system on or off.Exit8 or hang upPress to end remote access (the call is terminated).1.2.3.4.
54Answering system operationRemote accessHang up to end the call and save all undeleted messages.NOTES:If you do not enter a valid remote access code, the system answers the call automatically.If you pause for more than four seconds during remote access, you hear a help menu listing all features and commands. If there is no command for another 20 seconds, the call ends automatically.If the memory is full, the answering system answers after 10 rings and announces, “Memoryis full. Enter the remote access code.” Enter your remote access code to access the messages and announcements.When the answering system is turned off, the telephone answers after 10 rings, and announces, “Please enter your remote access code.”There is a wallet card listing the remote commands at the back of this user’s manual. Cut it out and keep it in your wallet for quick reference.5.•••••
55AppendixAppendixALREADY SAVED The telephone number you have entered is already stored in the directory.CALL LOG EMPTY You are accessing an empty caller ID history.CALL TRANSFERED An outside call from one handset is transferred to another handset.CALLINGOTHER HANDSET(For EL52200 only)CALLINGHANDSET X(For EL52300 or EL52400)The handset is calling the other (another) handset (for intercom calls).The handset is going to transfer an outside call to the other (another) handset.••CHARGING A handset with a low battery has been placed in the telephone base or charger.CONNECTING... The handset has lost communication with the telephone base.DIRECTORY EMPTY There are no directory entries.ENDED You have just ended a call.OTHER HANDSETIS CALLING(For EL52200 only)HANDSET XIS CALLING(For EL52300 or EL52400)The other (another) handset is calling.INCOMING CALL There is a call coming in.INTERCOM The handset is on an intercom call.INTERCOM ENDED The intercom call has just ended.INTERCOM TO:(For EL52300 or EL52400)You have started the intercom process, and need to enter the number of the handset you wish to call.LINE IN USE An extension telephone on the same line or one of the handsets is in use.LIST FULL The directory is full. You cannot save any new entries unless you delete some current entries.LOW BATTERY The battery needs to be charged.MICROPHONE ON Mute is off so the other party can hear your voice.MUTED The microphone is off.NEW VOICEMAIL There are new voicemail messages.NO LINE There is no telephone line connected.Display screen messages
56AppendixNO MESSAGES No messages in the answering system.NO SIGNAL,CALL ENDEDThe handset is out of range while on a call.NOT AVAILABLEAT THIS TIMESomeone else is already using the directory, caller ID history or answering system.OUTSIDE CALL You have connected to the external call during call transfer. PAGING The telephone base is paging all handsets.PHONE The handset is in use.PLACE INCHARGERThe battery is very low. The handset should be placed in the telephone base or charger.REC MEM FULL The answering system memory is full.RINGER MUTE The ringer is muted temporarily during an incoming call.SAVED The entry is now in the directory.SPEAKER The handset speakerphone is in use.TRANSFER TO:(For EL52300 or EL52400)You have started transferring a call, and need to enter the desired handset number.UNABLE TO CALLTRY AGAINFailed intercom or three-way conversation (there are already two handsets being used).UNABLE TO SAVE When save a caller ID history entry in the directory, neither name nor number is provided.XX MISSED CALLS There are new calls in the caller ID history.XX NEW MESSAGES There are new messages in the answering system.Display screen messages
57AppendixTroubleshootingIf you have difficulty with your telephone, please try the suggestions below. For customer service, or to purchase accessories or replacement parts, visit our website at www.telephones.att.com, or call 1 (800) 222-3111.In Canada, dial 1 (866) 288-4268. The serial number, found on the bottom of your telephone base, is available when contacting customer service. Please retain your sales receipt as your proof of purchase.My telephone doesn’t work at all.Make sure the power cord is securely plugged in.Make sure that the battery connector is securely plugged into the cordless handset.Make sure the telephone line cord is securely and firmly plugged into the telephone base and the telephone wall jack.Charge the battery in the cordless handset for at least 16 hours. For optimum daily performance, return the cordless handset to the telephone base or charger when not in use.If the battery is depleted, it may take approximately ten minutes to charge the handset before it shows HANDSET X, refer to Battery charging on page 9 for details.Reset the telephone base. Unplug the electrical power. Wait for approximately 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.You may need to purchase a new battery. Please refer to Battery installationon page 8.I cannot get a dial tone.First try all the suggestions above.Move the cordless handset closer to the telephone base. You might have moved out of range.If the previous suggestions don’t work, disconnect the telephone base from the telephone jack and connect to a different telephone. If there is no dial tone on that telephone either, the problem is in your wiring or telephone service. Contact your telephone service provider.Your line cord might be malfunctioning. Try installing a new line cord.I cannot dial out.First try all the suggestions in the item I cannot get a dial tone on this page.Make sure you have a dial tone before dialing. The cordless handset may take a second or two to find the telephone base and produce a dial tone. This is normal. Wait an extra second before dialing.•••••••••••••
58AppendixTroubleshootingCheck that all the telephones connected to the same telephone line are hung up.Make sure to set the dial mode to the correct setting (pulse dialing or tone dialing) for the service in your area (see Dial mode on page 17).Eliminate any background noise. Noise from a television, radio or other appliances may cause the telephone to not dial out properly. If you cannot eliminate the background noise, first try muting the cordless handset before dialing, or dialing from another room in your home with less background noise.If the other telephones in your home are having the same problem, the problem is in your wiring or telephone service. Contact your telephone service provider (charges may apply).My cordless handset isn’t performing normally.Make sure the power cord is securely plugged into the telephone base. Plug the power adapter into a different, working electrical outlet not controlled by a wall switch.Move the cordless handset closer to the telephone base. You might have moved out of range.Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.Other electronic products can cause interference to your cordless telephone. Try installing your telephone as far away from these types of electronic devices as possible: television sets, VCRs, or other cordless telephones.CONNECTING... appears on my cordless handset.Ensure that the telephone base is powered up.Place the cordless handset in the telephone base for one minute to allow the cordless handset and base to resynchronize.Move the cordless handset closer to the telephone base. You might have moved out of range.Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.Other electronic products can cause interference to your cordless telephone. Try installing your telephone as far away from these types of electronic devices as possible: television sets, VCRs, or other cordless telephones.•••••••••••••
59AppendixTroubleshootingThe batteries do not hold a charge.If the cordless handset is in the telephone base or charger and the charge light does not come on, refer to the item The charge light is off on this page.Charge the battery in the cordless handset for at least 16 hours. For optimum daily performance, return the cordless handset to the telephone base or charger when not in use.If the battery is depleted, it may take approximately ten minutes to charge the handset before it shows HANDSET X, refer to Battery charging on page 9 for details.You may need to purchase a new battery. Please refer to Battery installationon page 8.The charge light is off.Make sure the power and line cords are plugged in correctly and securely.Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.Clean the cordless handset and telephone base charging contacts each month using a pencil eraser or cloth.I get noise, static, or weak signals even when I’m near the telephone base.If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (see Telephone base and charger installation on page 6). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.You may be able to improve the performance of your cordless telephone by installing your new telephone base as far as possible from any other existing cordless telephone system that may already be installed.Other electronic products can cause interference to your cordless telephone. Try installing your telephone as far away from the following electronic devices as possible: television sets, VCRs, or other cordless telephones.Do not install this telephone near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating.If your telephone is plugged in with a modem or a surge protector, plug the telephone (or modem/surge protector) into a different location. If this doesn’t solve the problem, relocate your telephone or modem farther apart from one another, or use a different surge protector.Relocate your telephone to a higher location. The telephone will likely have better reception when installed in a high area.•••••••••••••
60AppendixTroubleshootingIf the other telephones in your home are having the same problem, the problem is in your wiring or telephone service. Contact your telephone service provider (charges may apply).I experience poor sound quality when using the speakerphone.For increased sound quality while using the speakerphone, place the handset on a flat surface with the dial pad facing up.When using a speakerphone, controlling background noise in your environment is essential. While you are listening to your party, press MUTE/DELETE to temporarily turn your microphone off. When it is your turn to speak, remember to press MUTE/DELETE again to turn the microphone on.Excessive background noise will cause a speakerphone to fade in and out. Try controlling the background noise by turning off any audio devices near the speakerphone. Also, try to avoid interrupting the person at the other end of the conversation while they are speaking. If background noise cannot be controlled, you should terminate speakerphone operation and return to normal handset mode.I hear other calls while using my telephone.Disconnect the telephone base from the telephone jack, and plug in a different telephone. If you still hear other calls, the problem is probably in your wiring or telephone service. Call your telephone service provider (charges may apply).My calls cut in and out while I’m using my cordless handset.Other electronic products can cause interference to your cordless telephone. Try installing your telephone as far away as possible from electronic devices such as wireless routers, or other cordless telephones.Move the handset closer to the base. The operating range may vary with environmental conditions and time of use. There may be places within your environment that a cordless telephone will not work well. If the problem only occurs in certain areas of your environment, you can conclude that there is nothing wrong with the telephone.Do not install this telephone near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating.If your telephone is plugged in with a modem or surge protector, plug the telephone (or modem/surge protector) into a different location. If this doesn’t solve the problem, relocate your telephone or modem farther apart from one another, or use a different surge protector.Relocate your telephone base to a higher location. The telephone will have better reception when installed in a high area.••••••••••
61AppendixTroubleshootingIf the other telephones in your home are having the same problem, the problem is in your wiring or telephone service. Contact your telephone service provider (charges may apply).If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (see Telephone base and charger installation on page 6). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.My cordless handset does not ring when I receive a call.Make sure that the ringer is not turned off. Refer to Ringer volume on page 14.Make sure the telephone line cord is plugged securely into the telephone base and the telephone jack. Make sure the power cord is securely plugged in.The cordless handset may be too far from the telephone base.Charge the battery in the cordless handset for at least 16 hours. For optimum daily performance, return the cordless handset to the telephone base or charger when not in use.You may have too many extension telephones on your telephone line to allow all of them to ring simultaneously. Try unplugging one telephone at a time until the telephone start ringing.The layout of your home or office might be limiting the operating range. Try moving the telephone base to another location, preferably on an upper floor.If the other telephones in your home are having the same problem, the problem is in your wiring or telephone service. Contact your telephone service provider (charges may apply).Test a working telephone at the telephone wall jack. If another telephone has the same problem, the problem is the telephone wall jack. Contact your telephone service provider (charges may apply).Other electronic products can cause interference to your cordless telephone. Try installing your telephone as far away as possible from electronic devices such as wireless routers, or other cordless telephones.Re-install the battery, and place the cordless handset in the telephone base. Wait for the cordless handset to re-establish its connection with the telephone base. Allow up to one minute for this to take place.Your telephone line cord might be malfunctioning. Try installing a new telephone line cord.•••••••••••••
62AppendixTroubleshootingMy caller ID isn’t working.Caller ID is a subscription service. You must subscribe to this service from your telephone service provider for this feature to work on your telephone.Your caller must be calling from an area that supports caller ID.Both your and your caller’s telephone service providers must use caller ID compatible equipment.Make sure the home area code is set correctly in the telephone (see Home area code on page 17).If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter between the telephone line and the telephone wall jack (see Telephone base and charger installation on page 6). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.My telephone does not receive caller ID when on a call.Make sure you subscribe to caller ID with call waiting features provided by your telephone service provider. Caller ID features work only if both you and the caller are in areas offering caller ID service, and if both telephone service providers use compatible equipment.A icon shows on the display and I don’t know why.Your telephone has voicemail indication that is separate from the built-in answering system. If appears on the display, then your telephone has received a signal from your telephone service provider that you have a voicemail message waiting for you to retrieve from your telephone service provider. Contact your telephone service provider for more information on how to access your voicemail.I cannot retrieve voicemail messages.Your telephone has both a built-in answering system and voicemail indication. They are independent features and each alerts you to new messages differently (see Answering system and voicemail on page 46).If you subscribe to voicemail service from your telephone service provider (charges may apply), contact your telephone service provider for more information on how to access your voicemail.Incomplete messages.If a caller leaves a very long message, part of it may be lost when the answering system disconnects the call after four minutes.If the caller pauses for longer than seven seconds, the answering system stops recording and disconnects the call.••••••••••
63AppendixTroubleshootingIf the answering system’s memory becomes full during a message, the answering system stops recording and disconnects the call.If the caller’s voice is very soft, the answering system may stop recording and disconnects the call.Difficulty hearing messages.Press VOLUME to adjust the speaker volume on the telephone base.Press DIR/VOLUME to increase the message playback volume on a handset.The answering system does not answer after correct number of rings.Make sure the answering system is on. When the answering system is on, ANS ON should show on the handset and the ANSWER ON/OFF light is lit on the telephone base (see Answering mode on page 18).If toll saver is selected, the number of rings changes to two when there are new messages (see Number of rings on page 20).If the memory is full or the answering system is off, the answering system answers after 10 rings.In some cases, the answering system is affected by the ringing system used by the telephone service provider. If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail answers (see Answering system and voicemail on page 46). To determine how many rings activate your voicemail, contact your telephone service provider.If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems.The answering system announces “Time and date not set.”You need to reset the date and time (see Set date/time on page 16).The answering system does not respond to remote commands.Make sure to enter your remote access code correctly (see Remote accesson page 53).Make sure you are calling from a touch-tone telephone. When you dial a number, you should hear tones. If you hear clicks, the telephone is not a touch-tone telephone and cannot activate the answering system.The answering system may not detect the remote access code while your announcement is playing. Try waiting until the announcement is over before entering the code.There may be interference on the telephone line you are using. Press dial pad keys firmly.•••••••••••••••
64AppendixTroubleshootingThe answering system does not record messages.Make sure the answering system is on (see Answering mode on page 18).Make sure the memory of the answering system is not full. When the answering machine memory is full, it does not record new messages until some old messages are deleted. If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail answers (see Answering system and voicemail on page 46). To determine how many rings activate your voicemail, contact your telephone service provider.If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems.Outgoing announcement is not clear.When you record your announcement, make sure you speak in a normal tone of voice, towards the microphone on the handset.Make sure there is no background noise (TV, music, etc.) while recording.Common cure for electronic equipment:If the telephone is not responding normally, try resetting the telephone. Do the following in the order listed:Disconnect the power to the telephone base.Disconnect the cordless handset battery, and spare battery, if applicable.Wait a few minutes.Connect power to the telephone base.Re-install the battery, and place the cordless handset into the telephone base.Wait for the cordless handset to re-establish its connection with the telephone base. Allow up to one minute for this to take place.••••••1.2.3.4.5.6.
65AppendixMaintenanceTaking care of your telephoneYour cordless telephone contains sophisticated electronic parts, so it must be treated with care.Avoid rough treatment.Place the handset down gently.Save the original packing materials to protect your telephone if you ever need to ship it.Avoid waterYour telephone can be damaged if it gets wet. Do not use the handset in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower.Electrical stormsElectrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electric appliances during storms.Cleaning your telephoneYour telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or mild soap.Do not use excess water or cleaning solvents of any kind.••••••••Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the telephone base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL. Then pull the telephone out by the unplugged cords.
66AppendixImportant safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock.Safety informationRead and understand all instructions in the user’s manual. Observe all markings on the product.Avoid using a telephone during a thunderstorm. There might be a slight chance of electric shock from lightning.Do not use a telephone in the vicinity of a gas leak. If you suspect a gas leak, report it immediately, but use a telephone away from the area where gas is leaking. If this product is a cordless model, make sure the base is also away from the area.Do not use this product near water, or when you are wet. For example, do not use it in a wet basement or shower, or next to a swimming pool, bathtub, kitchen sink, or laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product comes in contact with any liquids, unplug any line or power cord immediately. Do not plug the product back in until it has dried thoroughly.Install this product in a protected location where no one can trip over any line or power cords. Protect cords from damage or abrasion.If this product does not operate normally, read Troubleshooting on page 57 in this user’s manual. If you cannot solve the problem, or if the product is damaged, refer to Limited warranty on page 70. Do not open this product except as may be directed in your user’s manual. Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks.Replace batteries only as described in Battery installation and charging on page 8 in your user’s manual. Do not burn or puncture batteries — they contain caustic chemicals.The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if they are plugged into a ceiling or an under-the-table/cabinet outlet. CAUTION: Use only the power adapters provided with this product. To obtain a replacement, visit our website at www.telephones.att.com, or call 1 (800) 222–3111.In Canada, dial 1 (866) 288-4268.Especially about cordless telephonesPrivacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone base and the handset by radio waves, so there is a possibility that your cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones.Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet which is not controlled by a wall switch. Calls cannot be made from the handset if the telephone base is unplugged, switched off or if the electrical power is interrupted.••••••••••
67AppendixImportant safety informationPotential TV interference: Some cordless telephones operate at frequencies that may cause interference to TVs and VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference.Rechargeable batteries: This product contains nickel-metal hydride rechargeable batteries. Exercise care in handling batteries in order not to create a short circuit with conductive material such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger.Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.The RBRC™ Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickel-metal hydride rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center. Or you may call 1 (800) 8- BATTERY for locations accepting spent Ni-MH batteries.Precautions for users of implanted cardiac pacemakersCardiac pacemakers (applies only to digital cordless telephones): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:Pacemaker patientsShould keep wireless telephones at least six inches from the pacemaker.Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON.Should use the wireless telephone at the ear opposite the pacemaker.WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones.Especially about telephone answering systemsTwo-way recording: This unit does not sound warning beeps to inform the other party that the call is being recorded. To ensure that you are in compliance with any federal or state regulations regarding recording a telephone call, you should start the recording process and then inform the other party that you are recording the conversation.SAVE THESE INSTRUCTIONS••••••
68AppendixFCC part 68 and ACTAThis equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request.The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with the applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See Installation Instructions in the user’s manual.The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your telephone service provider.This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable the alarm equipment, consult your telephone service provider or a qualified installer.If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty.If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone service provider is required to notify you if such changes are planned.If this product is equipped with a corded or cordless handset, it is hearing aid compatible.If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:Remain on the line and briefly explain the reason for the call before hanging up.Perform such activities in off-peak hours, such as early morning or late evening.Industry CanadaOperation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation.The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met.The Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five.This product meets the applicable Industry Canada technical specifications.••
69AppendixFCC part 15This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules.These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone.To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20cm (8 inches) or more.This Class B digital apparatus complies with Canadian ICES-003.••••
70AppendixLimited warrantyThe AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to: In the United States of America, call 1 (800) 222-3111 or visit www.telephones.att.com; In Canada, call 1 (866) 288-4268.What does this limited warranty cover?The manufacturer of this AT&T-branded product warrants to the holder of a valid proof of purchase (“CONSUMER” or “you”) that the product and all accessories provided in the sales package (“PRODUCT”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the PRODUCT operating instructions. This limited warranty extends only to the CONSUMER for products purchased and used in the United States of America and Canada.What will be done if the PRODUCT is not free from defects in materials and workmanship during the limited warranty period (“materially defective PRODUCT”)?During the limited warranty period, the manufacturer’s authorized service representative repairs or replaces at the manufacturer’s option, without charge, a materially defective PRODUCT. If the manufacturer repairs the PRODUCT, they may use new or refurbished replacement parts. If the manufacturer chooses to replace the PRODUCT, they may replace it with a new or refurbished PRODUCT of the same or similar design. The manufacturer retains the defective parts, modules, or equipment. Repair or replacement of the PRODUCT, at the manufacturer’s option, is your exclusive remedy. The manufacturer returns the repaired or replacement products to you in working condition. You should expect the repair or replacement to take approximately 30 days.How long is the limited warranty period?The limited warranty period for the PRODUCT extends for ONE (1) YEAR from the date of purchase. If the manufacturer repairs or replaces a materially defective PRODUCT under the terms of this limited warranty, this limited warranty also applies to repaired or replacement PRODUCT for a period of either (a) 90 days from the date the repaired or replacement PRODUCT is shipped to you or (b) the time remaining on the original one-year limited warranty; whichever is longer.What is not covered by this limited warranty?This limited warranty does not cover:PRODUCT that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion; orPRODUCT that has been damaged due to repair, alteration, or modification by anyone other than an authorized service representative of the manufacturer; orPRODUCT to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; orPRODUCT to the extent that the problem is caused by use with non-AT&T accessories; orPRODUCT whose warranty/quality stickers, PRODUCT serial number plates or electronic serial numbers have been removed, altered or rendered illegible; orPRODUCT purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to products used for rental purposes); orPRODUCT returned without a valid proof of purchase (see item 6 below); orCharges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit.1.2.3.4.••••••••
71AppendixHow do you get warranty service?To obtain warranty service in the United States of America, visit www.telephones.att.com or call 1 (800) 222-3111; in Canada, dial 1 (866) 288-4268. NOTE: Before calling for service, please review the user’s manual. A check of the PRODUCT’s controls and features might save you a service call.Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the PRODUCT(s) to the service location. The manufacturer will return repaired or replaced PRODUCT under this limited warranty. Transportation, delivery or handling charges are prepaid. The manufacturer assumes no risk for damage or loss of the PRODUCT in transit. If the PRODUCT failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, the manufacturer notifies you and requests that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of products that are not covered by this limited warranty.What must you return with the PRODUCT to get warranty service?You must:Return the entire original package and contents including the PRODUCT to the service location along with a description of the malfunction or difficulty; andInclude a “valid proof of purchase” (sales receipt) identifying the PRODUCT purchased (PRODUCT model) and the date of purchase or receipt; andProvide your name, complete and correct mailing address, and telephone number.Other limitationsThis warranty is the complete and exclusive agreement between you and the manufacturer of this AT&T branded PRODUCT. It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for this PRODUCT. The warranty exclusively describes all of the manufacturer’s responsibilities regarding the PRODUCT. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification.State/Provincial Law Rights: This warranty gives you specific legal rights, and you might also have other rights that vary from state to state or province to province.Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the PRODUCT is fit for ordinary use) are limited to one year from date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation might not apply to you. In no event shall the manufacturer be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the PRODUCT or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this PRODUCT. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion might not apply to you.Please retain your original sales receipt as proof of purchase.5.6.a.b.c.7.Limited warranty
72AppendixTechnical specificationsRF frequency band 1921.536MHz — 1928.448MHzChannels 5Operating temperature 32°F — 122°F0°C — 50°CTelephone base voltage(AC voltage, 60Hz)96 — 130VrmsTelephone base voltage(DC adapter output)DC6V @400mAHandset voltage DC2.4 — 3.2VBattery 2.4V 400mAh Ni-MHCharger voltage(AC adapter output)AC6V @300mAOperating time* Talk time (handset): up to seven hoursTalk time (speakerphone): up to five hoursStandby: up to five days* Operating times varies depending on your actual use and the age of the battery.DECT 6.0 digital technologyThe AT&T DECT 6.0 products offer unsurpassed range performance and sound clarity. This is achieved through a unique antenna design and advances in noise-filtering technology. An independent laboratory has confirmed that AT&T DECT 6.0 products perform up to 45% better in range competitions. Now calls can be taken in the basement, backyard and garage with exceptional sound quality.Telephone operating rangeThis cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance — which can vary with the locations of the telephone base and handset, the weather, and the construction of your home or office.Extended range and clarityThis telephone base comes with an antenna which gives much better clarity and covers a longer range than before.
73AppendixIndexAAlert tones, 4Alphabetical search, 35Answer a call, 23Answer an incoming call during an intercom call, 30Answering mode, 18Answering system, 46–54Answering system and voicemail, 46Answering system settings, 18–21Any key answer, 23Area code, 17, 40, 43Auto off, 24BBase ringer volume, 22Battery charging, 9Battery installation, 8CCaller ID, 40Caller ID history (call log), 41–45Call intercept, 48Call screening, 20, 48Call transfer, 31Call waiting, 25, 40Chain dialing, 26Character chart, 34Charger installation, 7DDate and time, 16Delete all entries from caller ID history, 44Delete messages, 49, 50, 53Dial a directory number, 36Dial a number from caller ID history, 44Dial a speed dial number, 39Dialing options, 43Dial mode, 17Directory, 32–39Directory storage, 33Display screen messages, 55DSL filter, 6, 10EElapsed time, 23End a call, 24FFlash, 25HHandset locator, 29Handset ringer tone, 14Handset ringer volume, 14IImportant safety information, 66Indicator lights, 4Intercom call, 30KKey tone, 16LLanguage, 14Last number redial, 28Limited warranty, 70MMaintenance, 65Make a call, 23Memo, 51Memory match, 41Menu, 13–21Message alert tone, 21
74AppendixMessage playback, 49Message window displays, 52Mute, 25NNumber of rings, 20, 46OOperation time, 72Outgoing announcement, 18PPause, 23, 33Power adapter, 6Predialing, 23RReasons for missing caller ID information, 42Recording time, 47Redial, 28Remote access, 53Remote access code, 21Remote access wallet card, 75Remote commands, 53Repeat messages, 49, 50, 53SScreen icons, 5Skip messages, 49, 50, 53Speakerphone switching, 19, 24, 49Speed dial, 34, 37, 38–39TTabletop installation, 6Technical specifications, 72Temporarily turning off the message alert tone, 48Temporary ringer silencing, 23Temporary tone dialing, 26Three-way conversation, 27, 31Toll saver, 20Troubleshooting, 57VVoicemail, 15, 46Voice prompts, 47Volume control, 19, 25, 48, 49, 50WWall-mount installation, 10Index
AppendixFold here.Cut along dotted line.Action Remote commandPlay all messages .....................1Play new messages..................2Delete the message.................3 (during message playback)Delete all old messages ........33Repeat or go back....................4Call your telephone number, then enter your two-digit remote access code (preset to 19).EL52200/EL52300/EL52400 DECT 6.0 cordless telephone/answering system with caller ID/call waiting© 2009 Advanced American Telephones. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China.Stop..................................................5Help menu ....................................*5Skip the message......................6Record announcement ...........*7Turn system on or off .............0End remote access call ..........8 (or hang up)Remote access wallet cardThe wallet card below lists the commands needed to control your answering system from any touch-tone telephone.
© 2009 Advanced American Telephones. All rights reserved.AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219.Printed in China. Issue 1 AT&T 08/09.www.telephones.att.com

Navigation menu