VTech Telecommunications 80-7296-00 1.9GHz CORDLESS PHONE User Manual LS6315 X CIB 120209 draft 0 Eng FCC

VTech Telecommunications Ltd 1.9GHz CORDLESS PHONE LS6315 X CIB 120209 draft 0 Eng FCC

UserManual.wiki >

VTech Telecommunications >

80-7296-00 User Manual >

Users Manual 1

1. Users Manual 1
2. Users Manual 2

Users Manual 1

User’s manualwww.vtechphones.comModels: LS6315/LS6315-2

Congratulationson purchasing your new VTech product. Before using this telephone, please read the Important safety instructions on page 51 of this manual.This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech telephone. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature rich VTech product. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com.In Canada, please visit www.vtechcanada.com.The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR® label indicating it meets the latest energy GHſEKGPE[IWKFGNKPGU

Table of contentsiGetting started .............................. 1Parts checklist.................................1Telephone base and charger installation.................................... 2Battery installation .......................... 3Battery charging.............................. 4Installation options .......................... 5Tabletop to wall-mount installation ................................... 5Wall-mount to tabletop installation.................................... 6Telephone base layout .................... 7Handset layout ................................ 8Telephone settings ..................... 11Ringer volume (telephone base)... 11Ringer volume (handset)............... 11Ringer tone.................................... 11LCD language ............................... 12Clear voicemail.............................. 12Key tone ........................................ 13Set date/time ................................. 13CID time synchronization .............. 14Home area code............................ 14Dial mode ...................................... 15Website.......................................... 15Telephone operation................... 16Make a call ................................... 16Predial a call.................................. 16Answer a call ................................. 16End a call....................................... 16Speakerphone............................... 16Volume .......................................... 16Mute .............................................. 17Temporary ringer silencing............ 17Temporary tone dialing.................. 17Find handset.................................. 18Call waiting.................................... 18Equalizer........................................ 18Chain dialing.................................. 19Redial list....................................... 20Dial a redial entry .......................... 20Delete from redial list .................... 20Multiple handset use ..................... 20Intercom ........................................ 21Answer an incoming call during an intercom call.......................... 21Transfer/share call using intercom ..................................... 22Push to talk (PTT) ......................... 23PTT On/Off.................................... 23PTT to a single handset ................ 24PTT to all handsets ....................... 25Answer PTT................................... 26Switch a one-to-one PTT to intercom ................................. 26End PTT ........................................ 27Answer an incoming call during PTT ................................. 27Directory........................................ 28Store a directory entry................... 29Character chart .............................30Search the directory...................... 31Alphabetical search....................... 31Dial a directory entry ..................... 31Edit a directory entry ..................... 32Delete from the directory............... 33Call log .......................................... 34Memory match .............................. 34Missed calls indicator ................... 35Review the call log ....................... 35View dialing options ...................... 36Dial a call log entry ....................... 36

iiTable of contentsSave a call log entry to the directory ............................... 37Delete from the call log ................. 38Call log display screen messages...................................38Appendix...................................... 39Handset display screen messages................................... 39Handset and telephone base indicators ................................... 41Battery........................................... 42Expand your telephone system..... 43Add and register a handset (optional) ....................................43Replace a handset ........................ 44Troubleshooting............................. 45Important safety instructions......... 51Precautions for users of implanted cardiac pacemakers.. 52Operating range ............................ 52Maintenance.................................. 53About cordless telephones............54The RBRC® seal............................ 54Warranty........................................ 55FCC, ACTA and IC regulations ..... 576GEJPKECNURGEKſECVKQPU ................ 59Index .............................................60

1Telephone line cordParts checklistYour telephone contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.Quick start guideTelephone baseTelephone base power adapterUser’s manualHandset(1 for LS6315, 2 for LS6315-2)Charger and charger adapter(1 for LS6315-2)Battery(1 for LS6315, 2 for LS6315-2)Battery compartment cover(1 for LS6315, 2 for LS6315-2)Getting startedTo purchase replacement batteries or power adapters, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.

3Getting startedCHARGElightBattery installation Install the battery as shown below. If the battery compartment cover is on the handset, press on the indentation and slide the cover to remove.Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label.Place the battery with the label THIS SIDE UP facing up and the wires inside the battery compartment.#NKIPVJGEQXGTƀCVCICKPUVVJGDCVVGT[EQORCTVOGPVVJGPUNKFGKVVQYCTFUthe center of the handset until it clicks into place.Charge the handset by placing it in the telephone base or charger. The CHARGE light is on when the handset charges.1.2.3.4.5.13245If the handset will not be used for a long time, disconnect and remove the battery to prevent possible leakage.To purchase replacement batteries, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.••

4Getting startedBattery chargingOnce you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 16 hours of continuous charging. See the table on page 42 for battery operating times.If the screen is blank, you need to charge the handset without interruption for at least 10 minutes to give the handset enough charge to use the telephone for a short time. When the battery is low, the handset shows Low batteryCPFCƀCUJKPI icon. If you are on a call in low battery mode, the handset has four short beeps to alert you.The following table summarizes the battery charge indicators and actions to take.Battery indicators Battery status ActionThe screen is blank. Battery has no charge and the handset cannot be used.Charge without interruption (at least 10 minutes).The screen shows Place in charger and ƀCUJGUBattery has very little charge and the handset cannot be used.Charge without interruption (at least four minutes).The screen shows Low battery and ƀCUJGU6JGJCPFUGVbeeps four times every minute.Battery has enough charge to be used for a short time.Charge without interruption until the screen shows HANDSET X(about 30 minutes).The screen shows HANDSET X.Battery is charged. To keep the battery charged, place it in the telephone base or charger when not in use.If you do not plug in the battery into the handset and place it in the telephone base or charger, the screen displays No battery.

5Getting startedInstallation optionsYour telephone base is ready for tabletop use. If you want to mount yourtelephone on a wall, use the provided wall-mount bracket to connect with a standard dual-stud telephone wall-mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronics retailers. You may need a professional to install the mounting plate.Tabletop to wall-mount installation Plug one end of the telephone line cord into the TEL LINE jack on the bottom of the telephone base. Plug the small end of the larger power adapter into the POWER jack on the bottom of the telephone base.Position the telephone base as shown below. Insert the extended tabs of the wall-mount bracket into the slots on the back of the telephone base. Push the telephone base down until it clicks securely in place.Route the telephone line cord through the wall-mount bracket hole and plug it into the telephone wall jack. Route the power cord out of the bottom of the telephone and plug it into an electrical outlet not controlled by a wall switch.Align the holes on the bracket with the standard wall plate and slide the bracket down until it locks securely. Bundle the telephone line cord and power adapter cord neatly with a twist tie.1.2.3.4.1 234

6Getting startedWall-mount to tabletop installationIf the telephone line cord and power adapter cord are bundled, untie VJGOſTUVSlide the black wall-mount bracket up and remove it from the wall plate. 7PRNWIVJGVGNGRJQPGNKPGEQTFQT&5.ſNVGTHTQOVJGYCNN7PRNWIVJGpower adapter from the power outlet.Slide the telephone base up and remove it from the wall-mount bracket.See Telephone base and charger installation on page 2.1.2.3.4.

7Getting startedIN USE lightFlashes when there is an incoming call, or another telephone sharing the same line is in use.On when the handset is in use.Telephone base layout/FIND HANDSETPress to page all system handsets (page 18).

8Getting startedVOL/ (volume/directory)Press to enter the directory when the telephone is not in use (page 31).While in a menu, press to scroll up.During a call, press to increase the listening volume (page 16).Handset layoutCHARGE lightOn when the handset is charging in the telephone base or charger (page 3).1While reviewing a call log entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory (page 36)./FLASHPress to make or answer a call (page 16).During a call, press to answer an incoming call when you receive a call waiting alert (page 18).REDIAL/PAUSEPress to review the redial list (page 20). While dialing or entering numbers into the directory, press and hold to insert a dialing pause (page 16).(speakerphone)Press to make or answer a call (page 16).During a call, press to switch between speakerphone and handset (page 16).TONEWhile you have set the dial mode to pulse and on a call, press to temporarily change to tone dial mode (page 17).

39Handset display screen messagesAlready saved The telephone number entered is already stored in the directory.Call log empty There are no call log entries.Calling handset X(for models with three or more handsets)Calling other handset(for models with two handsets)Calling another handset.Directory empty There are no directory entries.Directory full The directory is full.Ended You have just ended a call.Handset X is calling(for models with three or more handsets)Calling other handset(for models with two handsets) Another system handset is calling.Incoming call There is an incoming call.Intercom The handset is on an intercom call.Intercom ended You have just ended an intercom call.Line in use A system handset or another telephone on the same line is in use.Low battery The battery needs to be recharged.Microphone ON MUTE is turned off and the person on the other end can hear you. Muted You have turned off the handset microphone. The other party cannot hear you but you can hear the other party.Memory full Answering system has no recording time left.New voicemail There are new voicemail messages from your telephone service provider.No batteryNo battery is installed. Follow the directions for battery installation on page 3to install the battery before charging.No line There is no telephone line connected.Appendix

40AppendixHandset display screen messagesNo signal,call endedCommunication between handset and telephone base is lost during a call.N ot a vaila bleat this timeOne handset is already viewing the call log or directory and another handset attempts to review it.Out of range ORNo pwr at baseThe handset cannot communicate with the telephone base. Check the telephone base power connection or move closer.** Paging ** The system handset is being paged.Phone The handset is on a call.Pla c e in chargerThe battery is very low. Place the handset in the telephone base or charger for recharging.Ringer off The ringer is muted temporarily during an incoming or intercom call.Saved Your selection has been saved.Speaker The handset speakerphone is in use.Unable to call. Try againYou have attempted to make an intercom call, but the handset you are calling is in the directory, in the call log, out of range or on an outside call.Unable to save You are attempting to save a caller ID entry with no name or number.XX Missed calls There are unreviewed calls in your call log.

41AppendixHandset and telephone base indicatorsHandset lightsOn when the handset speakerphone is in use.CHARGE On when the handset is charging in the telephone base or charger.Telephone base lightsIN USE On when the telephone line is in use.On when you are registering a handset.Flashes quickly when there is an incoming call.Flashes when another telephone sharing the same line is in use.Flashes when you are deregistering all handsets.$CVVGT[UVCVWUƀCUJGUYJGPVJGDCVVGT[KUNQYCPFneeds charging.Battery status - animates when the battery is charging.Speakerphone is in use.Handset ringer off.New voicemail received from your telephone service provider.New answering system messages.NEW New call log entries.MUTE Microphone is muted.Handset icons

$42AppendixBatteryIt takes up to 16 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:Operation Operating timeWhile in handset use (talking*) Up to seven hoursWhile in speakerphone mode (talking*) 7RVQſXGJQWTUWhile not in use (standby**) Up to seven days*Operating times vary depending on your actual use and the age of the battery. **Handset is not charging or in use.The battery needs charging when:A new battery is installed in the handset.The handset beeps.A battery is properly installed and the screen is blank.Low battery or Place in charger shows on the handset screen.CAUTION:6QTGFWEGVJGTKUMQHſTGQTKPLWT[TGCFCPFHQNNQYVJGUGKPUVTWEVKQPUUse only the battery(ies) provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.&QPQVFKURQUGQHVJGDCVVGT[KGUKPCſTG%JGEMYKVJNQECNYCUVGOCPCIGOGPVcodes for special disposal instructions.Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.Exercise care in handling batteries in order not to create a short circuit with conductive materials.%JCTIGVJGDCVVGT[KGURTQXKFGFYKVJQTKFGPVKſGFHQTWUGYKVJVJKURTQFWEVQPN[KPCEEQTFCPEGYKVJVJGKPUVTWEVKQPUCPFNKOKVCVKQPUURGEKſGFKPVJKUOCPWCNObserve proper polarity orientation between the battery and metallic contacts.6QRTGXGPVſTGQTUJQEMJC\CTFFQPQVGZRQUGVJKURTQFWEVVQYCVGTQTCP[V[RGQHmoisture.•••••••••••$

43AppendixExpand your telephone systemThe handsets provided with your telephone system are pre-registered. Each handset is assigned a number that shows on the handset display. Additional handsets registered to the telephone system are assigned in sequential order. For instance, if the telephone system already has HANDSET 1 and HANDSET 2, the new registered handset is assigned HANDSET 3. This VGNGRJQPGU[UVGOCEEQOOQFCVGUWRVQſXGJCPFUGVUAdd and register a handset (optional)You can add new handsets (LS6305, purchased separately) to your telephone system, but each handset must be registered with the VGNGRJQPGDCUGDGHQTGWUG9JGPſTUVRWTEJCUGFGCEJGZRCPUKQPhandset shows 1.Press FIND HS on base 4sec and 2.Then press # on handsetalternately. You may need to charge the handset before registering to the telephone base. For more details on battery charging, see the table on page 4.To register a handset:Place the unregistered handset in the telephone base or charger. If 1.Press FIND HS on base 4sec and 2.Then press # on handset do not appear alternately on the handset screen after a few seconds, remove the handset and place it in the telephone base or charger again.On the telephone base, press and hold /FIND HANDSET for about four seconds (until the red IN USE light on the telephone base turns on) and then release the button. On the handset, press #and the handset shows Registering...Please wait. It takes about 10 seconds to complete the registration. The handset shows HANDSET X Registered and you hear a beep when the registration completes.1.2.3.If the registration fails, the handset shows 1.Press FIND HS on base 4 secand 2.Then press # on handset alternately. To reset the handset, remove the handset from the telephone base and place it back in. Try the registration process again.You cannot register a handset if any other system handset is in use.••

44AppendixReplace a handsetIf you want to replace a handset or re-assign the designated handset number of a registered handset, you must deregister all the handsets and then individually register each handset.To make deregistration easier, read all of the instructions on this page before you begin.To deregister all handsets:Press and hold /FIND HANDSET on the telephone base for about 10 seconds (until the IN USE light on the telephone base turns on and UVCTVUVQƀCUJVJGPTGNGCUG /FIND HANDSET.Press and release /FIND HANDSET again. You must press /FIND HANDSET while the IN USENKIJVKUUVKNNƀCUJKPI6JGIN USE light ƀCUJGUHQTCRRTQZKOCVGN[UGXGPUGEQPFUThe deregistration process takes about 10 seconds to complete. All handsets show 1.Press FIND HS on base 4sec and 2.Then press # on handsetalternately when the deregistration completes.If deregistration fails, you may need to reset the telephone and try again.To reset:Pick up the registered handset and then press /FLASH.Press OFF/CLEAR and place the handset back in the telephone base.-OR-Unplug the power from the telephone base, then plug it back in.1.2.3.1.2.1.You cannot deregister a handset if any system handset is in use.

45AppendixTroubleshooting+H[QWJCXGFKHſEWNV[YKVJ[QWTVGNGRJQPGRNGCUGVT[VJGUWIIGUVKQPUDGNQYFor Customer Service, visit our website at www.vtechphones.com, or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.My telephone does not work at all.Make sure the battery is installed and charged correctly (page 3-4). For optimum daily performance, return the handset to the telephone base or charger after use.Make sure the power adapter is securely plugged into an outlet not controlled by a wall switch./CMGUWTGVJGVGNGRJQPGNKPGEQTFKURNWIIGFſTON[KPVQVJGVGNGRJQPGDCUGCPFVJGtelephone wall jack.Unplug the electrical power to the telephone base. Wait for approximately 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to synchronize.Charge the battery in the handset for up to 16 hours.If the battery is completely depleted, it can take up to 10 minutes to charge the handset before Low battery appears on the screen (page 4).Remove and re-insert the battery. If that still does not work, it might be necessary to purchase a new battery.Disconnect the telephone base from the telephone wall jack and plug in a working telephone. If the other telephone does not work, the problem is probably in the wiring or the local service. Call your telephone service provider.There is no dial tone.First, try all the above suggestions.Move the handset closer to the telephone base. It might be out of range.The telephone line cord might be malfunctioning. Install a new telephone line cord.Disconnect the telephone base from the telephone wall jack and connect a different telephone. If there is no dial tone on this telephone either, the problem is in your wiring or local service. Contact your telephone service provider.I cannot dial out.First, try all the above suggestions.Make sure there is a dial tone before dialing. It is normal if the handset takes a second or two to synchronize with the telephone before producing a dial tone. Wait an extra second before dialing.If the other telephones in your home are having the same problem, the problem is in the wiring or local service. Contact your telephone service provider.Eliminate any background noise. Mute the cordless handset before dialing, or dial from another room in your home with less background noise.••••••••••••••••

46AppendixTroubleshootingLow battery shows on screen.Place the handset in the telephone base or charger for recharging.Remove and reinstall the battery and use it until fully depleted, then recharge the handset in the telephone base or charger for up to 16 hours.If the above measures do not correct the problem, replace the battery.The battery does not charge in the handset or the handset battery does not accept charge.Make sure the handset is placed in the telephone base or charger correctly. The CHARGE light on the handset should be on.Remove and reinstall the battery, then charge for up to 16 hours.If the handset is in the telephone base or charger but the CHARGE light on the handset is not on, refer to The CHARGE light is off in this section.If the battery is completely depleted, it can take up to 10 minutes to charge the handset before Low battery appears on the screen (page 4).Purchase a new battery. Refer to the Battery section (page 42).The CHARGE light is off.Clean the charging contacts on the handset and telephone base each month with a pencil eraser or a dry non-abrasive fabric.Make sure the power adapter and telephone line cord are plugged in correctly and securely.Unplug the power adapter. Wait for 15 seconds before plugging it back in. Allow up to one minute for the handset and telephone base to reset.The telephone does not ring when there is an incoming call.Make sure the handset ringer volume is not set to the lowest level (page 11) and the telephone base ringer volume is not set to zero (page 11). Make sure the telephone line cord and power adapter are plugged in properly (page 2).The handset may be too far from the telephone base. Move it closer to the telephone base.There may be too many extension phones on the telephone line to allow all of them to ring simultaneously. Unplug some of them.If the other telephones in your home are having the same problem, the problem is in the wiring or local service. Contact your telephone service provider.Other electronic products can cause interference to your cordless telephone. Install your telephone as far away as possible from electronic devices such as: wireless routers, radios, cellular telephones, digital telephones, intercoms, room monitors, televisions, VCRs, personal computers, kitchen appliances, and other cordless telephones.•••••••••••••••••

51AppendixImportant safety instructionsWhen using your telephone equipment, basic safety precautions should always be followed to TGFWEGVJGTKUMQHſTGGNGEVTKEUJQEMCPFKPLWT[KPENWFKPIVJGHQNNQYKPIRead and understand all instructions. Follow all warnings and instructions marked on the product.Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water.Do not place this product on an unstable table, shelf, stand or other unstable surfaces.Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This product should not be placed in any area where proper ventilation is not provided. This product should be operated only from the type of power source indicated on the marking NCDGN+H[QWCTGPQVUWTGQHVJGV[RGQHRQYGTUWRRN[KP[QWTJQOGQTQHſEGEQPUWNV[QWTFGCNGTor local power company. Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on. Never push objects of any kind into this product through the slots in the telephone base or handset because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the telephone base or handset other VJCPURGEKſGFCEEGUUFQQTUOC[GZRQUG[QWVQFCPIGTQWUXQNVCIGUQTQVJGTTKUMU+PEQTTGEVreassembling can cause electric shock when the product is subsequently used. Do not overload wall outlets and extension cords. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions:When the power supply cord or plug is damaged or frayed.If liquid has been spilled onto the product. If the product has been exposed to rain or water.If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation.If the product has been dropped and the telephone base and/or handset has been damaged.If the product exhibits a distinct change in performance.Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning.Do not use the telephone to report a gas leak in the vicinity of the leak.Only put the handset of your telephone next to your ear when it is in normal talk mode.6JGRQYGTCFCRVGTUCTGKPVGPFGFVQDGEQTTGEVN[QTKGPVGFKPCXGTVKECNQTƀQQTOQWPVRQUKVKQPThe prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.SAVE THESE INSTRUCTIONS1.2.3.4.5.6.7.8.9.10.11.12.A.B.C.D.E.F.13.14.15.16.

52AppendixPrecautions for users of implanted cardiac pacemakersCardiac pacemakers (applies only to digital cordless telephones):Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:Pacemaker patientsShould keep wireless telephones at least six inches from the pacemaker.Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON.Should use the wireless telephone at the ear opposite the pacemaker.WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones.Operating rangeThis cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance - which can vary with the locations of the telephone base and handset, the weather, and the NC[QWVQH[QWTJQOGQTQHſEGWhen the handset is out of range, the handset displays Out of range OR No pwr at base.If there is a call while the handset is out of range, it might not ring, or if it does ring, the call might not connect well when you press /FLASH. Move closer to the telephone base, then press /FLASH toanswer the call. If the handset moves out of range during a telephone conversation, there might be interference.To improve reception, move closer to the telephone base.•••

53AppendixMaintenanceTaking care of your telephoneYour cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatmentPlace the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid waterYour telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower.Electrical stormsElectrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electrical appliances during storms. Cleaning your telephoneYour telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or a mild soap. Do not use excess water or cleaning solvents of any kind.Remember that electrical appliances can cause serious injury if used when you are wet or standing in the water. If the telephone base should fall into the water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORD FROM THE WALL. Then remove the telephone by the unplugged cords.

54AppendixAbout cordless telephonesPrivacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone base and the cordless handset by radio waves, so there is a possibility that the cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones.Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls cannot be made from the cordless handset if the telephone base is unplugged, switched off or if the electrical power is interrupted. Potential TV interference: Some cordless telephones operate at frequencies that may cause interference to televisions and VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR often reduces or eliminates the interference. Rechargeable batteries: Exercise care in handling batteries in order not to create a short circuit with conducting material such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger.Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture the battery. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.•••••The RBRC® sealThe RBRC® seal on the nickel-metal hydride battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The RBRC® program provides a convenient alternative to placing used nickel-metal hydride batteries into the trash or municipal waste, which may be illegal in your area.VTech’s participation in RBRC®makes it easy for you to drop off the spent battery at local retailers participating in the RBRC® program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERYTM for information on Ni-MH battery recycling and disposal bans/restrictions in your area. VTech’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources.RBRC® is a registered trademark of Rechargeable Battery Recycling Corporation.

55AppendixWarrantyWhat does this limited warranty cover?The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada.What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (“Materially Defective Product”)?During the limited warranty period, VTech’s authorized service representative will repair or replace at VTech’s option, without charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTech’s option, is your exclusive remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or replacement to take approximately 30 days.How long is the limited warranty period?The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer.What is not covered by this limited warranty?This limited warranty does not cover:1. Product that has been subjected to misuse, accident, shipping or other physical damage, KORTQRGTKPUVCNNCVKQPCDPQTOCNQRGTCVKQPQTJCPFNKPIPGINGEVKPWPFCVKQPſTGYCVGTQTQVJGTliquid intrusion; or2TQFWEVVJCVJCUDGGPFCOCIGFFWGVQTGRCKTCNVGTCVKQPQTOQFKſECVKQPD[CP[QPGQVJGTVJCPan authorized service representative of VTech; or3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or4. Product to the extent that the problem is caused by use with non-VTech accessories; or5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or7. Product returned without a valid proof of purchase (see item 2 below); or8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.

$56AppendixHow do you get warranty service?To obtain warranty service in the United States of America, visit www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377. NOTE: Before calling for service, please review the user’s manual - a check of the Product’s controls and features may save you a service call.Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty.What must you return with the Product to get warranty service?Return the entire original package and contents including the Product to the VTech service NQECVKQPCNQPIYKVJCFGUETKRVKQPQHVJGOCNHWPEVKQPQTFKHſEWNV[CPFInclude a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and3. Provide your name, complete and correct mailing address, and telephone number.Other limitationsThis warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTech’s responsibilities regarding the 2TQFWEV6JGTGCTGPQQVJGTGZRTGUUYCTTCPVKGU0QQPGKUCWVJQTK\GFVQOCMGOQFKſECVKQPUVQVJKUNKOKVGFYCTTCPV[CPF[QWUJQWNFPQVTGN[QPCP[UWEJOQFKſECVKQP5VCVG2TQXKPEKCN.CY4KIJVU6JKUYCTTCPV[IKXGU[QWURGEKſENGICNTKIJVUCPF[QWOC[CNUQJCXGother rights, which vary from state to state or province to province..KOKVCVKQPU+ORNKGFYCTTCPVKGUKPENWFKPIVJQUGQHſVPGUUHQTCRCTVKEWNCTRWTRQUGCPFOGTEJCPVCDKNKV[CPWPYTKVVGPYCTTCPV[VJCVVJG2TQFWEVKUſVHQTQTFKPCT[WUGCTGNKOKVGFVQQPGyear from the date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not NKOKVGFVQNQUVRTQſVUQTTGXGPWGKPCDKNKV[VQWUGVJG2TQFWEVQTQVJGTCUUQEKCVGFGSWKROGPVVJGcost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.Please retain your original sales receipt as proof of purchase.1.2.Warranty (continued)$

VTech Telecommunications 80-7296-00 1.9GHz CORDLESS PHONE User Manual LS6315 X CIB 120209 draft 0 Eng FCC

VTech Telecommunications Ltd 1.9GHz CORDLESS PHONE LS6315 X CIB 120209 draft 0 Eng FCC

Contents

Users Manual 1

Navigation menu

Namespaces

Views

Navigation