VTech Telecommunications 80-7296-00 1.9GHz CORDLESS PHONE User Manual LS632X X CIB 120209 draft 0 re Eng FCC

VTech Telecommunications Ltd 1.9GHz CORDLESS PHONE LS632X X CIB 120209 draft 0 re Eng FCC

Contents

Users Manual 2

User’s manualwww.vtechphones.comModels: LS6325/LS6325-2/LS6325-3/LS6325-4/ LS6325-5/LS6326-5
Congratulationson purchasing your new VTech product. Before using this telephone, please read the Important safety instructions on page 62 of this manual.This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech telephone. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature rich VTech product. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com.In Canada, please visit www.vtechcanada.com.The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR® label indicating it meets the latest energy GHſEKGPE[IWKFGNKPGU
Table of contentsiGetting started .............................. 1Parts checklist.................................1Telephone base and charger installation....................... 2Battery installation .......................... 3Battery charging..............................4Installation options .......................... 5Tabletop to wall-mount installation ................................... 5Wall-mount to tabletop installation .................................... 6Telephone base layout .................... 7Handset layout ................................ 8Telephone settings ..................... 10Ringer volume (telephone base)... 10Ringer volume (handset)............... 10Ringer tone.................................... 10LCD language ............................... 11Clear voicemail.............................. 11Key tone ........................................ 12Set date/time ................................. 12Home area code............................ 13Dial mode ...................................... 13Answering system settings ....... 14Answering system set up .............. 14Answer ON/OFF............................ 14Call screening ............................... 15Number of rings............................. 15Remote access code .................... 16Message alert tone........................ 16Announcement .............................. 16Play your announcement ............. 17Record your own announcement .......................... 17Delete your announcement ........... 17Telephone operation................... 18Make a call ................................... 18Predial a call.................................. 18Answer a call ................................. 18End a call....................................... 18Speakerphone............................... 18Volume .......................................... 18Make a call using speed dial......... 18Mute .............................................. 19Temporary ringer silencing............ 19Temporary tone dialing.................. 19Find handset.................................. 19Call waiting .................................... 20Chain dialing.................................. 20Redial list....................................... 21Dial a redial entry .......................... 21Delete from redial list .................... 21Multiple handset use ..................... 21Intercom ........................................ 22Answer an incoming call during an intercom call.......................... 22Share an outside call..................... 23Directory........................................ 24Store a directory entry................... 25Character chart .............................26Search the directory...................... 27Alphabetical search....................... 27Dial a directory entry ..................... 27Edit a directory entry ..................... 28Delete from the directory............... 28Speed dial ..................................... 29Store a speed dial entry ................ 29Dial a speed dial number .............. 29Delete a speed dial entry .............. 30About caller ID............................... 30Memory match .............................. 31Call log .......................................... 31
iiTable of contentsMissed calls indicator ................... 32Review the call log ....................... 32View dialing options ......................33Dial a call log entry .......................33Save a call log entry to the directory ...............................34Delete from the call log ................. 35Call log display screen messages................................... 35Answering system operation..... 36Answering system and voicemail ....................................36Message capacity ......................... 36New message indication ............... 37Call intercept ................................. 37Message playback ........................ 37Delete all messages...................... 38Record and play memos ............... 39Message window displays.............40Remote access ............................. 41Appendix...................................... 42Handset display screen messages................................... 42Handset and telephone base indicators ................................... 44Battery........................................... 45Expand your telephone system..... 46Add and register a handset (optional) .................................... 46Replace a handset ........................ 47Troubleshooting............................. 48Important safety instructions......... 55Precautions for users of implanted cardiac pacemakers.. 56Operating range ............................ 56Maintenance.................................. 57About cordless telephones............ 58The RBRC® seal............................ 58Warranty ........................................ 59FCC, ACTA and IC regulations ..... 616GEJPKECNURGEKſECVKQPU ................ 63Index ............................................. 64
1Telephone line cordParts checklistYour telephone contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.Quick start guideTelephone baseTelephone base power adapterUser’s manualHandset(1 for LS6325, 2 for LS6325-2, 3 for LS6325-3 and LS6325-4)Charger and charger adapter(1 for LS6325-2, 2 for LS6325-3 and 3 for LS6325-4)Battery(1 for LS6325, 2 for LS6325-2, 3 for LS6325-3, 4 for LS6325-4)Battery compartment cover(1 for LS6325, 2 for LS6325-2, 3 for LS6325-3 and 4 for LS6325-4)Getting startedTo purchase replacement batteries or power adapters, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.
2Telephone base and charger installationInstall the telephone base and charger(s) as shown below. Make sure that the electrical outlet is not controlled by a wall switch. If you subscribe to DSL (digital subscriber line) high-speed Internet service through your telephone line, you must install a &5.ſNVGTDGVYGGPVJGVGNGRJQPGNKPGEQTFCPFVJGVGNGRJQPGYCNNLCEM6JGſNVGTRTGXGPVUPQKUGCPFcaller ID problems caused by DSL interference. Contact your DSL service RTQXKFGTHQTOQTGKPHQTOCVKQPCDQWV&5.ſNVGTUTelephone baseTelephone wall jackChargerUse only the power adapters supplied with this product. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.The power adapters are intended to be correctly oriented in a vertical or ƀQQTOQWPVRQUKVKQP6JGRTQPIUCTGPQVFGUKIPGFVQJQNFVJGRNWIKPRNCEGKHit is plugged into a ceiling, under-the-table or cabinet outlet.••Getting startedElectrical outlet not controlled by a wall switchIf you have DSL high speed Internet service, a DSL filter (not included) is required.Telephone line cordTelephone base power adapter Charger adapter
3Getting startedCHARGElightBattery installation Install the battery as shown below. If the battery compartment cover is on the handset, press on the indentation and slide the cover to remove.Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label.Place the battery with the label THIS SIDE UP facing up and the wires inside the battery compartment.#NKIPVJGEQXGTƀCVCICKPUVVJGDCVVGT[EQORCTVOGPVVJGPUNKFGKVVQYCTFUthe center of the handset until it clicks into place.Charge the handset by placing it in the telephone base or charger. The CHARGE light is on when the handset charges.1.2.3.4.5.13245If the handset will not be used for a long time, disconnect and remove the battery to prevent possible leakage.To purchase replacement batteries, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.••
4Getting startedBattery chargingOnce you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 16 hours of continuous charging. See the table on page 51 for battery operating times.If the screen is blank, you need to charge the handset without interruption for at least 10 minutes to give the handset enough charge to use the telephone for a short time. When the battery is low, the handset shows Low batteryCPFCƀCUJKPI icon. If you are on a call in low battery mode, the handset has four short beeps to alert you.The following table summarizes the battery charge indicators and actions to take.Battery indicators Battery status ActionThe screen is blank. Battery has no charge and the handset cannot be used.Charge without interruption (at least 10 minutes).The screen shows Place in charger and ƀCUJGUBattery has very little charge and the handset cannot be used.Charge without interruption (at least four minutes).The screen shows Low battery and ƀCUJGU6JGJCPFUGVbeeps four times every minute.Battery has enough charge to be used for a short time.Charge without interruption until the screen shows HANDSET X(about 30 minutes).The screen shows HANDSET X.Battery is charged. To keep the battery charged, place it in the telephone base or charger when not in use.If you do not plug in the battery into the handset and place it in the telephone base or charger, the screen displays No battery.
5Getting startedInstallation optionsYour telephone base is ready for tabletop use. If you want to mount yourtelephone on a wall, use the provided wall-mount bracket to connect with a standard dual-stud telephone wall-mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronics retailers. You may need a professional to install the mounting plate.Tabletop to wall-mount installation Plug one end of the telephone line cord into the TEL LINE jack on the bottom of the telephone base. Plug the small end of the larger power adapter into the POWER jack on the bottom of the telephone base.Position the telephone base as shown below. Insert the extended tabs of the wall-mount bracket into the slots on the back of the telephone base. Push the telephone base down until it clicks securely in place.Route the telephone line cord through the wall-mount bracket hole and plug it into the telephone wall jack. Route the power cord out of the bottom of the telephone and plug it into an electrical outlet not controlled by a wall switch.Align the holes on the bracket with the standard wall plate and slide the bracket down until it locks securely. Bundle the telephone line cord and power adapter cord neatly with a twist tie.1.2.3.4.1 234
6Getting startedWall-mount to tabletop installationIf the telephone line cord and power adapter cord are bundled, untie VJGOſTUVSlide the black wall-mount bracket up and remove it from the wall plate. 7PRNWIVJGVGNGRJQPGNKPGEQTFQT&5.ſNVGTHTQOVJGYCNN7PRNWIVJGpower adapter from the power outlet.Slide the telephone base up and remove it from the wall-mount bracket.See Telephone base and charger installation on page 2.1.2.3.4.
7Getting started/FIND HANDSETPress to page all system handsets (page 21).Message windowShows the number of messages and other answering system information (page 46).X/DELETEPress to delete the message currently playing (page 43).When the phone is not in use, press twice to delete all previously reviewed messages (page 45)./ANS ON/OFFPress to turn the answering system on or off (page 15)./PLAY/STOPPress to play messages (page 43).Press to stop message playback (page 43)./VOL and VOL/Press to adjust the volume during playback (page 43).When the phone is not in use, press to adjust the telephone base ringer volume (page 10).IN USE lightFlashes when there is an incoming call, or another telephone sharing the same line is in use.On when the handset is in use.Telephone base layout/SKIPPress to skip to the next message (page 43)./REPEATPress to repeat a message or press twice to play the previous message (page 43).
8Getting startedVOL/ (volume/directory)Press to enter the directory when the telephone is not in use (page 34).While in a menu, press to scroll up.During a call, press to increase the listening volume (page 19).Handset layoutCHARGE lightOn when the handset is charging in the telephone base or charger (page 3).1While reviewing a call log entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory (page 39)./FLASHPress to make or answer a call (page 19).During a call, press to answer an incoming call when you receive a call waiting alert (page 21).REDIAL/PAUSEPress to review the redial list (page 23). While dialing or entering numbers into the directory, press and hold to insert a dialing pause (page 19).(speakerphone)Press to make or answer a call (page 19).During a call, press to switch between speakerphone and handset (page 19).TONEWhile you have set the dial mode to pulse and on a call, press to temporarily change to tone dial mode (page 20).
9Getting startedHandset layoutMENU/SELECTPress to show the menu.While in a menu, press to select an item, or save an entry or setting.OFF/CLEARDuring a call, press to hang up (page 19).While the handset is ringing, press to silence the ringer temporarily (page 20).While the telephone is not in use, press and hold to erase the missed calls indicator (page 38).During programming, press to exit without making changes.#Press repeatedly to show other dialing options when reviewing a call log entry (page 39).MUTE/REMOVEWhile on a call, press to mute the microphone (page 20).While reviewing the call log, directory or redial list, press to delete an individual entry (page 41, 36 and 23 respectively).Press to delete digits when predialing (page 19).EQDuring an outside call, intercom call, message or announcement playback, press to change the audio quality to best suit your hearing. (page 21).VOL/CID (volume/caller ID)Press to review the call log when the telephone is not in use (page 38).While in a menu, press to scroll down.During a call, press to decrease the listening volume (page 19).
10Ringer volume (handset)You can set the ringer volume or turn the ringer off. When the ringer is off, appears on the screen.Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Ringers, then press MENU/SELECT.Press MENU/SELECT to select >Ringer volume.Press /VOL or VOL/CID to adjust the volume. A sample of each ringer volume plays as you scroll through the choices.Press MENU/SELECTVQEQPſTO[QWTUGNGEVKQPCPF[QWJGCTCEQPſTOCVKQPVQPG1.2.3.4.5.The setting also determines the ringer volume of the intercom call and paging tone. However, paging volume ranges between level 4 to 6 only.Ringer toneYou can choose from different ringer tones.Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Ringers, then press MENU/SELECT.Press /VOL or VOL/CIDto select >Ringer tone, then press MENU/SELECT.Press /VOL or VOL/CID to select the desired ringer tone or melody. A sample of each ringer tone plays as you scroll through the choices.Press MENU/SELECTVQEQPſTO[QWTUGNGEVKQPCPF[QWJGCTCEQPſTOCVKQPVQPG1.2.3.4.5.If you turn off the ringer volume, you will not hear ringer tone samples.Telephone settings>Ringers Settings>Ringer volume Ringer tone Ringer volume>Ringer toneRINGER TONE>Tone 1Ringer volume (telephone base)Press or on the telephone base to adjust the ringer volume when the telephone is not in use. When you set the ringer volume to zero, the base ringer is off and the system announces, “Base ringer is off.”•RINGER VOLUME
11Telephone settingsLCD languageYou can select English,Français or Español to be used in all screen displays.Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Settings, then press MENU/SELECT.Press MENU/SELECT to select >LCD language.Press /VOL or VOL/CID to scroll through the choices.Press MENU/SELECTVQEQPſTO[QWTUGNGEVKQPCPF[QWJGCTCEQPſTOCVKQPVQPG1.2.3.4.5.Clear voicemailIf you subscribe to voicemail service offered by your telephone service provider, New voicemail and appear on the handset when you have new voicemail messages. Contact your telephone service provider for more information and assistance about using your voicemail service.After you have listened to all new voicemail messages, the indicators on the handset turn off automatically.Use the clear voicemail feature when the telephone indicates that there is new voicemail but there are none (for example, when you have accessed your voicemail while away from home). Clearing the voicemail waiting indicator only turns off the indicators; it does not delete your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal to turn on the indicators. To manually turn off these indicators:Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Settings, then press MENU/SELECT.Press /VOL or VOL/CID to select >Clr voicemail, then press MENU/SELECT. The screen shows Turn off indicator? Press MENU/SELECTVQEQPſTO[QWTUGNGEVKQPCPF[QWJGCTCEQPſTOCVKQPVQPG1.2.3.4.Your telephone service provider may alert you of new messages with a stutter (broken) dial tone. Contact your telephone service provider for details.Voicemail is different from answering system messages recorded in your answering system. For more information about the difference, see page 42.••>Clr voicemail Key toneTurn offindicator?>LCD language Clr voicemail LCD LANGUAGE>English
12Telephone settingsKey toneYou can turn the key tone on or off.Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Settings, then press MENU/SELECT.Press /VOL or VOL/CID to select >Key tone, then press MENU/SELECT.Press /VOL or VOL/CID to choose On or Off.Press MENU/SELECTVQEQPſTO[QWTUGNGEVKQPCPF[QWJGCTCEQPſTOCVKQPVQPGSet date/timeThe answering system announces the date and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. However, the year must be correct so that the day of the week can be calculated from the caller ID information. You can turn off the date and time settings of the caller ID service and use your own settings for each incoming call (see the CID time synchronizationsection on the following page).Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Settings, then press MENU/SELECT.Press /VOL or VOL/CID to select >Set date/time,then press MENU/SELECT.Press /VOL or VOL/CID to select >Date & time,then press MENU/SELECT.Press the dialing keys (0-9) to enter a two-digit number or press /VOL or VOL/CID until the screen displays the correct date. Press MENU/SELECTto advance.Repeat step 5 until the date and time are set. There is a EQPſTOCVKQPVQPG1.2.3.4.5.1.2.3.4.5.6.>Key tone Set date/timeKEY TONE>On>Set date/time Home area codeSET DATE12/25/09SET TIME10:45 AMIf the date and time are not set when a message is recorded, the system announces, “Time and date not set.” before each message plays.>Date & time CID time sync
13Telephone settingsCID time synchronizationFollow the steps below to turn the CID time sync feature on or off. The dedault setting is On.Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Settings, then press MENU/SELECT.Press /VOL or VOL/CID to select >Set date/time,then press MENU/SELECT.Press /VOL or VOL/CID to select >CID time sync,then press MENU/SELECT.Press /VOL or VOL/CID to select On or Off, then press MENU/SELECTVQEQPſTO[QWTUGNGEVKQPCPF[QWJGCTCEQPſTOCVKQPVQPG1.2.3.4.5.>Set date/time Home area code CID TIME SYNC>On Date & time>CID time syncHome area codeIf you dial your local calls using only seven digits (area code not required), you can program your home area code so that when you receive a call within your local area, the telephone number is automatically stored without the area code in the call log.Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Settings, then press MENU/SELECT.Press /VOL or VOL/CID to select >Home area code, then press MENU/SELECT.Use the dialing keys to enter the desired home area code.Press MUTE/REMOVE to delete a digit.Press and hold MUTE/REMOVE to delete the entire entry.5. Press MENU/SELECTVQEQPſTO[QWTUGNGEVKQPCPF[QWJGCTCEQPſTOCVKQPVQPG1.2.3.4.••If, in the future, your telephone service provider requires you to dial the area code when making a local call, or, if you move to a location that requires it, delete the home area code you have already programmed, following the steps above. After you have deleted the home area code, _ _ _ will appear in the display.HOME AREA CODE ___ >Home area code Dial mode
14Telephone settingsDial modeThe dial mode is preset to tone dialing. If you have pulse (rotary) service, you must change the dial mode to pulse dialing before using the telephone.Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Settings, then press MENU/SELECT.Press /VOL or VOL/CID to select >Dial mode,then press MENU/SELECT.Press /VOL or VOL/CID to choose Tone or Pulse.Press MENU/SELECTVQEQPſTO[QWTUGNGEVKQPCPF[QWJGCTCEQPſTOCVKQPVQPG1.2.3.4.5.While on a call in pulse dialing mode, press TONE to temporarily change to tone dial mode.>Dial mode -End of list-DIAL MODE>ToneWebsiteUse this feature to view the VTech website address.Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Website, then press MENU/SELECT.Press OFF/CLEAR to return to idle mode.1.2.3. Settings>Websitewww.vtechphones.com
15Answering system settingsAnswering system set upYou must use a system handset to change your answering system settings.Answer ON/OFFThe answering system must be turned on to answer and record messages.When the answering system is turned on, the /ANS ON/OFF light on the telephone base will be on and ANS ON will display on the handset.To turn on or off with the telephone base: Press /ANS ON/OFF to turn the built-in answering system on or off. When the answering system is turned on, it announces, “Calls will be answered.” When the answering system is turned off, it announces, “Calls will not be answered.”To turn on or off with a handset:Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Answering sys, then press MENU/SELECT.Press /VOL or VOL/CID to select >Answer ON/OFF, then press MENU/SELECT.Press /VOL or VOL/CID to choose On or Off, then press MENU/SELECT.•1.2.3.4.Answering system settingsIf you want to turn on or off the answering system when it has no recording time left, Memory full shows on the handset.
16Answering system settingsCall screeningYou can listen at the telephone base to a caller leaving a message. If you want to turn off the call screening feature, set the call screening off on the handset. Remember to increase the volume in order to hear your messages during playback.To turn on or off with a handset:Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Answering sys, then press MENU/SELECT.Press /VOL or VOL/CID to select >Ans sys setup, then press MENU/SELECT.Press MENU/SELECT to select >Call screening.Press /VOL or VOL/CID to choose On or Off, then press MENU/SELECT.Number of ringsYou can choose from two, four, or six rings; or toll saver. With toll saver selected, the answering system answers after two rings when you have new messages, and after four rings when you have no new messages. This enables you to check for new messages and avoid paying unnecessary long distance charges if you are calling from out of your local area.Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Answering sys, then press MENU/SELECT.Press /VOL or VOL/CID to select >Ans sys setup, then press MENU/SELECT.Press /VOL or VOL/CID to select ># of rings, then press MENU/SELECT.Press /VOL or VOL/CID to choose from 6,4,2 or TOLL SAVER, then press MENU/SELECT VQEQPſTO[QWTUGNGEVKQP1.2.3.4.5.1.2.3.4.5.If call screening is set to on while the answering system is answering a call, you can press VOL/ once on the telephone base to temporarily turn the call screening off. If call screening is set to off while the answering system is answering a call, you can press /VOL once on the telephone base to temporarily turn the call screening on. Press /VOL to temporarily increase the volume or VOL/ to temporarily decrease the volume to level 1 during call screening.••
17Answering system settingsRemote access code A two-digit security code is required to access the answering system remotely from any touch tone telephone. The preset code is 19. You can set the code from 00 to 99.Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Answering sys, then press MENU/SELECT.Press /VOL or VOL/CID to select >Ans sys setup, then pressMENU/SELECT.Press /VOL or VOL/CID to select >Remote code, then press MENU/SELECT.Press the dialing keys (0-9) to enter the code or /VOL or VOL/CID to select from 00 to 99, then press MENU/SELECT VQEQPſTOMessage alert toneThe telephone base beeps every 10 seconds to alert you of new messages. The tone stops when all new messages have been reviewed.Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Answering sys, then press MENU/SELECT.Press /VOL or VOL/CID to select >Ans sys setup, then press MENU/SELECT.Press /VOL or VOL/CID to select >Msg alert tone, then press MENU/SELECT.Press /VOL or VOL/CID to select from On or Off, then press MENU/SELECT VQEQPſTO[QWTUGNGEVKQPAnnouncementThe telephone is preset with a greeting that answers calls with “Hello, please leave a message after the tone.” You can use this preset announcement, or replace it with your own. 1.2.3.4.5.1.2.3.4.5.The answering system must be turned on for the message alert tone to function. Press any key on the telephone base (except /FIND HANDSET) to temporarily silence the message alert tone.••
18Answering system settingsPlay your announcement Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Answering sys, then press MENU/SELECT.Press MENU/SELECT to select >Announcement.The handset announces, “To play, press 2. To record, press 7.” Press 2to play.Record your own announcement Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Answering sys, then press MENU/SELECT.Press MENU/SELECT to select >Announcement.The handset announces, “To play, press 2. To record, press 7.” Press 7to record.The handset announces, “Record after the tone. Press 5 when you are done.”After the tone, speak towards the microphone of the handset.Press 5YJGPſPKUJGFThe answering system automatically plays back the newly recorded announcement. Press 5 to stop the playback at any time; 2 to replay the recorded announcement; or 7 to record again if desired.Delete your announcementPress MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Answering sys, then press MENU/SELECT.Press MENU/SELECT to select >Announcement.The handset announces, “To play, press 2. To record, press 7.” Press 3to delete your own recorded announcement. The handset announces, “Announcement deleted.”1.2.3.4.1.2.3.4.5.6.7.8.1.2.3.4.Your announcement can be up to 90 seconds in length.Announcements shorter than two seconds will not be recorded.••When your announcement is deleted, calls are answered with the preset announcement.
42Answering system and voicemailYour telephone has separate indicators for two different types of voice messages: those left on its built-in answering system and those left at your service provider’s voicemail. Your telephone’s built-in answering system messages and voicemail messages are separate. Each alerts you to new messages differently. If and New voicemail display on the handset, your telephone service provider is indicating that it has new voicemail for you. To listen to your voicemail, you typically dial an access number provided by your telephone service provider, followed by a security code or PIN.To listen to messages recorded on your digital answering system, press /PLAY/STOP on the telephone base (page 43).Some service providers bundle or combine multiple services like voicemail and call waiting, so you may not be aware that you have voicemail. To check what services you have and how to access them, contact your telephone service provider.You can use your telephone answering system and voicemail together by setting your built-in answering system to answer before voicemail answers. To learn how to program your voicemail settings, contact your telephone service provider. If you are on a call, or if the answering system is busy recording a message and you receive another call, the second caller can leave a voicemail message by following the instruction below.Set your answering system to answer calls at least two rings earlier than your voicemail is set to answer. For example, if your voicemail answers after six rings, set your answering system to answer after four rings. Some voicemail providers may program the delay before answering calls in seconds instead of rings. In this case, allow six seconds per ring when determining the appropriate setting. Message capacityThe answering system can record and store up to 99 messages. Each message can be up to four minutes in length. The total storage capacity for the announcement, messages and memos is approximately 14 minutes. The actual recording time depends on individual message characteristics. Messages remain available for replay until you delete them.••Answering system operation
43Answering system operationNew message indication6JGOGUUCIGYKPFQYQPVJGVGNGRJQPGDCUGƀCUJGUCPF shows on the handset when there are new answering system messages.If the new message alert tone is turned on, the telephone base beeps every 10 seconds when there are unreviewed messages. Call interceptIf you want to talk to the person whose message is being recorded, press /FLASH or on the handset. Message playbackIf you have new messages, the telephone plays only the new messages QNFGUVſTUV+HVJGTGCTGPQPGYOGUUCIGUVJGVGNGRJQPGRNC[UDCEMCNNOGUUCIGUQNFGUVſTUVOn the handset, if you have both new and old messages, you can play either new or old messages.When playback begins, you hear the total number of messages followed by the day and time of the message. After the last message, the telephone announces, “End of messages.”To play messages with the telephone base:Press /PLAY/STOP to listen to messages. Options during playback:Press /VOL or VOL/ to adjust the speaker volume.Press /SKIP to skip to the next message.Press /REPEAT to repeat the message currently playing. Press /REPEAT twice to listen to the previous message.Press X/DELETE to delete the current message. The system advances to the next message.Press /PLAY/STOP to stop.1.•••••
44Answering system operationMessage playback (continued)To play messages with a handset:Press MENU/SELECT when the handset is not in use.Press MENU/SELECT to select >Play messages. If you have either new or old messages, the messages play automatically. If you have both new and old messages:To play new messages, press MENU/SELECT to select >Play new msgs.To play old messages, press VOL/CID to select >Play old msgs,then press MENU/SELECT.Options during playback:Press /VOL or VOL/CID to adjust the speaker volume.Press EQ to adjust the handset message playback audio quality.Press 6 to skip to the next message.Press 4 to repeat the message currently playing. Press 4 twice to listen to the previous message.Press 3 to delete the current message. The system advances to the next message.Press 5 to stop.1.2.••••••••When the answering system has less than three minutes of recording time left, the remaining time is announced.When the telephone is not in use, if FCPFPWODGTQTOGUUCIGUCTGƀCUJKPIalternately in the message window or the handset displays Rec mem full, the memory is full. Delete some messages to make room for more. You can only delete old messages, which are messages you have played.•••
45Answering system operationDelete all messagesTo delete all messages with the telephone base:Press X/DELETE when the phone is not in use. The telephone announces, “To delete all old messages, press DELETEagain.” Press X/DELETE again. All previously heard messages are erased and the telephone announces, “All old messages deleted.”To delete all messages with a handset:Press MENU/SELECT to show the menu when the handset is not in use.Press /VOL or VOL/CID to select >Answering Sys, then press MENU/SELECT.Press /VOL or VOL/CID to select >Delete all old, then press MENU/SELECT. The handset shows Delete all old messages?Press MENU/SELECTVQEQPſTO[QWTUGNGEVKQPRecord and play memosMemos are your own recorded messages used as reminders for yourself or others using the same answering system. You can record your own memos using a system handset. Playback and delete them in the same way as incoming messages.To record a memo:Press MENU/SELECT when the handset is not in use.Press /VOL or VOL/CID to select >Answering Sys, then press MENU/SELECT.Press /VOL or VOL/CID to select >Record memo, then press MENU/SELECT.The handset announces, “Record after the tone. Press 5 when you are done.” After the tone, speak towards the microphone of the handset.Press 5YJGPſPKUJGFTGEQTFKPI6JGJCPFUGVCPPQWPEGU“Recorded.”1.2.1.2.3.4.1.2.3.4.5.“Memory is full” is announced if you record a memo when the memory is full.Each memo can be up to four minutes in length.Memos shorter than two second are not recorded.•••
46Answering system operationWhen the memory is full, the answering system answers incoming calls after 10 rings and announces, “Memory is full. Enter the remote access code.” Window display Description0No messages.1-9 9 Total number of old messages recorded. Current message number during old message playback.0-99ƀCUJKPI 9JGPVKOGCPFFCVGCTGPQVUGVKVƀCUJGU0, total number of new messages recorded, or total number of old messages recorded.The telephone base may have lost and regained power. The clock needs to be set.1-9 9 & F (alternating) Memory is full with total number of messages recorded.1-8 Telephone base speaker volume level while adjusting.-- The system is answering a call, or recording a memo or announcement.Telephone is answering a call or being accessed remotely.The answering system is being programmed.0-6 Telephone base ringer level while adjusting.Message window displays
47Answering system operationIf you do not press any keys after you enter the remote access code, all new messages play. If there are no new messages, all old messages play.Once the new messages have played, the telephone announces the help menu options. If you do not press any key within 20 seconds, the remote access call automatically disconnects.When the answering system is turned off, the telephone answers after 10 rings, and announces, “Please enter your remote access code.”•••Remote accessA two-digit security code is required to access the answering system remotely from any touch tone telephone. The preset code is 19; see Remote access code on page 17 to change it. Dial your telephone number from any touch tone telephone.When the system plays your announcement, enter the two-digit security code. You can also enter one of the following remote commands.Hang up or press 8 to end the call.1.2.3.4.Command Function1Play all messages.2Play only new messages.3Delete the current message (during playback).33 Delete all old messages.4Repeat the current message (during playback).5Stop.*5 Hear a list of remote commands.6Skip to the next message (during playback).*7 Record a new announcement.8End the call.0Turn the answering system on or off.
48Handset display screen messagesAlready saved The telephone number entered is already stored in the directory.Call log empty There are no call log entries.Calling handset X(for models with three or more handsets)Calling other handset(for models with two handsets)Calling another handset.Directory empty There are no directory entries.Directory full The directory is full.Ended You have just ended a call.Handset X is calling(for models with three or more handsets)Calling other handset(for models with two handsets)Another system handset is calling.Incoming call There is an incoming call.Intercom The handset is on an intercom call.Intercom ended You have just ended an intercom call.Line in use A system handset or another telephone on the same line is in use.Low battery The battery needs to be recharged.Microphone ON MUTE is turned off and the person on the other end can hear you. Muted You have turned off the handset microphone. The other party cannot hear you but you can hear the other party.Memory full Answering system has no recording time left.New voicemail There are new voicemail messages from your telephone service provider.No batteryNo battery is installed. Follow the directions for battery installation on page 3to install the battery before charging.No line There is no telephone line connected.Appendix
49AppendixHandset display screen messagesNo signal,call endedCommunication between handset and telephone base is lost during a call.Not availableat this timeOne handset is already viewing the call log or directory and another handset attempts to review it.Out of range ORNo pwr at baseThe handset cannot communicate with the telephone base. Check the telephone base power connection or move closer.** Paging ** The system handset is being paged.Phone The handset is on a call.Place in chargerThe battery is very low. Place the handset in the telephone base or charger for recharging.Rec mem full Answering system has no recording time left.Rec mem low Answering system has less than 3 minutes recording time left.Ringer off The ringer is muted temporarily during an incoming or intercom call.Saved Your selection has been saved.Speaker The handset speakerphone is in use.Unable to call. Try againYou have attempted to make an intercom call, but the handset you are calling is in the directory, in the call log, out of range or on an outside call.Unable to save You are attempting to save a caller ID entry with no name or number.XX Missed calls There are unreviewed calls in your call log.XX New messages There are new messages in the answering system.
50AppendixHandset and telephone base indicatorsHandset lightsOn when the handset speakerphone is in use.CHARGE On when the handset is charging in the telephone base or charger.Telephone base lightsIN USE On when the telephone line is in use.On when the answering system is answering a call.On when you are registering a handset.Flashes quickly when there is an incoming call.Flashes when another telephone sharing the same line is in use.Flashes when you are deregistering all handsets./ANS ON/OFF On when the answering system is turned on.$CVVGT[UVCVWUƀCUJGUYJGPVJGDCVVGT[KUNQYCPFneeds charging.Battery status - animates when the battery is charging.Speakerphone is in use.Handset ringer off.New voicemail received from your telephone service provider.ANS ON Answering system is turned on.New answering system messages.NEW New call log entries.MUTE Microphone is muted.Message number currently playing and total number of messages recorded.Handset icons1/13
51AppendixBatteryIt takes up to 16 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:Operation Operating timeWhile in handset use (talking*) Up to seven hoursWhile in speakerphone mode (talking*) 7RVQſXGJQWTUWhile not in use (standby**) Up to seven days*Operating times vary depending on your actual use and the age of the battery. **Handset is not charging or in use.The battery needs charging when:A new battery is installed in the handset.The handset beeps.A battery is properly installed and the screen is blank.Low battery or Place in charger shows on the handset screen.CAUTION:6QTGFWEGVJGTKUMQHſTGQTKPLWT[TGCFCPFHQNNQYVJGUGKPUVTWEVKQPUUse only the battery(ies) provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.&QPQVFKURQUGQHVJGDCVVGT[KGUKPCſTG%JGEMYKVJNQECNYCUVGOCPCIGOGPVcodes for special disposal instructions.Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.Exercise care in handling batteries in order not to create a short circuit with conductive materials.%JCTIGVJGDCVVGT[KGURTQXKFGFYKVJQTKFGPVKſGFHQTWUGYKVJVJKURTQFWEVQPN[KPCEEQTFCPEGYKVJVJGKPUVTWEVKQPUCPFNKOKVCVKQPUURGEKſGFKPVJKUOCPWCNObserve proper polarity orientation between the battery and metallic contacts.6QRTGXGPVſTGQTUJQEMJC\CTFFQPQVGZRQUGVJKURTQFWEVVQYCVGTQTCP[V[RGQHmoisture.•••••••••••
52AppendixExpand your telephone systemThe handsets provided with your telephone system are pre-registered. Each handset is assigned a number that shows on the handset display. Additional handsets registered to the telephone system are assigned in sequential order. For instance, if the telephone system already has HANDSET 1 and HANDSET 2, the new registered handset is assigned HANDSET 3. This VGNGRJQPGU[UVGOCEEQOOQFCVGUWRVQſXGJCPFUGVUAdd and register a handset (optional)You can add new handsets (LS6305, purchased separately) to your telephone system, but each handset must be registered with the VGNGRJQPGDCUGDGHQTGWUG9JGPſTUVRWTEJCUGFGCEJGZRCPUKQPhandset shows 1.Press FIND HS on base 4sec and 2.Then press # on handsetalternately. You may need to charge the handset before registering to the telephone base. For more details on battery charging, see the table on page 4.To register a handset:Place the unregistered handset in the telephone base or charger. If 1.Press FIND HS on base 4sec and 2.Then press # on handset do not appear alternately on the handset screen after a few seconds, remove the handset and place it in the telephone base or charger again.On the telephone base, press and hold /FIND HANDSET for about four seconds (until the red IN USE light on the telephone base turns on) and then release the button. On the handset, press #and the handset shows Registering...Please wait. It takes about 10 seconds to complete the registration. The handset shows HANDSET X Registered and you hear a beep when the registration completes.1.2.3.If the registration fails, the handset shows 1.Press FIND HS on base 4 secand 2.Then press # on handset alternately. To reset the handset, remove the handset from the telephone base and place it back in. Try the registration process again.You cannot register a handset if any other system handset is in use.••
53AppendixReplace a handsetIf you want to replace a handset or re-assign the designated handset number of a registered handset, you must deregister all the handsets and then individually register each handset.To make deregistration easier, read all of the instructions on this page before you begin.To deregister all handsets:Press and hold /FIND HANDSET on the telephone base for about 10 seconds (until the IN USE light on the telephone base turns on and UVCTVUVQƀCUJVJGPTGNGCUG /FIND HANDSET.Press and release /FIND HANDSET again. You must press /FIND HANDSET while the IN USENKIJVKUUVKNNƀCUJKPI6JGIN USE light ƀCUJGUHQTCRRTQZKOCVGN[UGXGPUGEQPFUThe deregistration process takes about 10 seconds to complete. All handsets show 1.Press FIND HS on base 4sec and 2.Then press # on handsetalternately when the deregistration completes.If deregistration fails, you may need to reset the telephone and try again.To reset:Pick up the registered handset and then press /FLASH.Press OFF/CLEAR and place the handset back in the telephone base.-OR-Unplug the power from the telephone base, then plug it back in.1.2.3.1.2.1.You cannot deregister a handset if any system handset is in use.
54AppendixTroubleshooting+H[QWJCXGFKHſEWNV[YKVJ[QWTVGNGRJQPGRNGCUGVT[VJGUWIIGUVKQPUDGNQYFor Customer Service, visit our website at www.vtechphones.com, or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.My telephone does not work at all.Make sure the battery is installed and charged correctly (page 3-4). For optimum daily performance, return the handset to the telephone base or charger after use.Make sure the power adapter is securely plugged into an outlet not controlled by a wall switch./CMGUWTGVJGVGNGRJQPGNKPGEQTFKURNWIIGFſTON[KPVQVJGVGNGRJQPGDCUGCPFVJGtelephone wall jack.Unplug the electrical power to the telephone base. Wait for approximately 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to synchronize.Charge the battery in the handset for up to 16 hours.If the battery is completely depleted, it can take up to 10 minutes to charge the handset before Low battery appears on the screen (page 4).Remove and re-insert the battery. If that still does not work, it might be necessary to purchase a new battery.Disconnect the telephone base from the telephone wall jack and plug in a working telephone. If the other telephone does not work, the problem is probably in the wiring or the local service. Call your telephone service provider.There is no dial tone.First, try all the above suggestions.Move the handset closer to the telephone base. It might be out of range.The telephone line cord might be malfunctioning. Install a new telephone line cord.Disconnect the telephone base from the telephone wall jack and connect a different telephone. If there is no dial tone on this telephone either, the problem is in your wiring or local service. Contact your telephone service provider.I cannot dial out.First, try all the above suggestions.Make sure there is a dial tone before dialing. It is normal if the handset takes a second or two to synchronize with the telephone before producing a dial tone. Wait an extra second before dialing.If the other telephones in your home are having the same problem, the problem is in the wiring or local service. Contact your telephone service provider.Eliminate any background noise. Mute the cordless handset before dialing, or dial from another room in your home with less background noise.••••••••••••••••
55AppendixTroubleshootingLow battery shows on screen.Place the handset in the telephone base or charger for recharging.Remove and reinstall the battery and use it until fully depleted, then recharge the handset in the telephone base or charger for up to 16 hours.If the above measures do not correct the problem, replace the battery.The battery does not charge in the handset or the handset battery does not accept charge.Make sure the handset is placed in the telephone base or charger correctly. The CHARGE light on the handset should be on.Remove and reinstall the battery, then charge for up to 16 hours.If the handset is in the telephone base or charger but the CHARGE light on the handset is not on, refer to The CHARGE light is off in this section.If the battery is completely depleted, it can take up to 10 minutes to charge the handset before Low battery appears on the screen (page 4).Purchase a new battery. Refer to the Battery section (page 51).The CHARGE light is off.Clean the charging contacts on the handset and telephone base each month with a pencil eraser or a dry non-abrasive fabric.Make sure the power adapter and telephone line cord are plugged in correctly and securely.Unplug the power adapter. Wait for 15 seconds before plugging it back in. Allow up to one minute for the handset and telephone base to reset.The telephone does not ring when there is an incoming call.Make sure the handset ringer volume is not set to the lowest level (page 10) and the telephone base ringer volume is not set to zero (page 10). Make sure the telephone line cord and power adapter are plugged in properly (page 2).The handset may be too far from the telephone base. Move it closer to the telephone base.There may be too many extension phones on the telephone line to allow all of them to ring simultaneously. Unplug some of them.If the other telephones in your home are having the same problem, the problem is in the wiring or local service. Contact your telephone service provider.Other electronic products can cause interference to your cordless telephone. Install your telephone as far away as possible from electronic devices such as: wireless routers, radios, cellular telephones, digital telephones, intercoms, room monitors, televisions, VCRs, personal computers, kitchen appliances, and other cordless telephones.•••••••••••••••••
56AppendixTroubleshootingTest a working telephone at the telephone wall jack. If another telephone has the same problem, the problem is in the telephone wall jack. Contact your telephone service provider.The telephone line cord may be malfunctioning. Install a new telephone line cord.Reinstall the battery and place the handset in the telephone base or charger.Wait for the handset to synchronize with the telephone base. Allow up to one minute for this to take place.My handset beeps and is not performing normally.Make sure the power cord is securely plugged into the telephone base. Plug the telephone base into a different working electrical outlet not controlled by a wall switch.Move the handset closer to the telephone base. It may be out of range.Reset the telephone base by unplugging the electrical power to the base. Wait for 15 seconds and plug it back in again. Allow up to one minute for the cordless handset and the telephone base to synchronize.Other electronic products can cause interference to your cordless telephone. Install your telephone as far away from these electronic devices as possible: wireless routers, radios, radio towers, pager towers, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless telephones.There is interference during a telephone conversation.My calls fade out when I am using the cordless handset.The handset may be out of range. Move it closer to the telephone base.If you subscribe to high-speed Internet service (digital subscriber line - DSL) through [QWTVGNGRJQPGNKPG[QWOWUVKPUVCNNC&5.ſNVGTDGVYGGPVJGVGNGRJQPGDCUGCPFVJGVGNGRJQPGYCNNLCEM6JGſNVGTRTGXGPVUPQKUGCPFECNNGT+&RTQDNGOUECWUGFD[DSL interference. Contact your DSL service provider for more information about &5.ſNVGTUAppliances or other cordless telephones plugged into the same circuit as the telephone base can cause interference. Try moving the appliance or telephone base to another outlet.Other electronic products can cause interference to your cordless telephone. Install your telephone as far away as possible from the following electronic devices: wireless routers, radios, radio towers, pager towers, cellular telephones, digital telephones, intercoms, room monitors, televisions, VCRs, personal computers, kitchen appliances, and other cordless telephones.If your telephone is plugged in with a modem or a surge protector, plug the telephone (or modem/surge protector) into a different location. If this doesn’t solve the problem, relocate your telephone or modem farther apart from each other, or use a different surge protector. •••••••••••••
57AppendixTroubleshootingThe location of your telephone base can impact the performance of your cordless phone. For better reception, install the telephone base in a centralized location within [QWTJQOGQTQHſEGCYC[HTQOYCNNUQTQVJGTQDUVTWEVKQPU+POCP[GPXKTQPOGPVUelevating the telephone base improves overall performance.Disconnect the telephone base from the telephone wall jack and plug in a corded telephone. If calls are still not clear, the problem is probably in the wiring or local service. Contact your telephone service provider (charges may apply).If the other telephones in your home are having the same problem, the problem is in the wiring or local service. Contact your telephone service provider.I hear other calls when using the telephone.Disconnect the telephone base from the telephone wall jack. Plug in a different telephone. If you still hear other calls, the problem is probably in the wiring or local service. Call your telephone service provider.I hear noise on the cordless handset and the keys do not work.Make sure the telephone line cord is plugged in securely.Registration failed appears on the handset.Only one handset can be registered at a time. If you have multiple handsets to register, please follow the instructions on page 52HQTVJGſTUVJCPFUGV1PEGChandset has been successfully registered, repeat the steps for each handset that needs to be registered.Make sure that the telephone base and handset(s) are in idle mode when registering a handset.Follow the steps on page 61 for the common cure for electronic equipment, then try again to register a handset. My caller ID features are not working properly.Caller ID is a subscription service. You must subscribe to this service from your telephone service provider for this feature to work on your telephone.The caller may not be calling from an area which supports caller ID.Both your and your caller’s telephone service providers must use equipment compatible with the caller ID service.6JGECNNGT+&KPHQTOCVKQPUJQYUCHVGTVJGſTUVQTUGEQPFTKPIIf you subscribe to high-speed Internet service (digital subscriber line - DSL) through [QWTVGNGRJQPGNKPG[QWOWUVKPUVCNNC&5.ſNVGTDGVYGGPVJGVGNGRJQPGDCUGCPFVJGVGNGRJQPGYCNNLCEM6JGſNVGTRTGXGPVUPQKUGCPFECNNGT+&RTQDNGOUECWUGFD[DSL interference. Contact your DSL service provider for more information about &5.ſNVGTU•••••••••••••
58AppendixTroubleshootingThe telephone does not receive caller ID or the telephone does not show caller ID during call waiting.Make sure you subscribe to caller ID with call waiting features provided by your telephone service provider. The caller may not be calling from an area which supports caller ID.Both your and your caller’s telephone service providers must use equipment compatible with caller ID service.If you subscribe to high-speed Internet service (digital subscriber line - DSL) through [QWTVGNGRJQPGNKPG[QWOWUVKPUVCNNC&5.ſNVGTDGVYGGPVJGVGNGRJQPGDCUGCPFVJGVGNGRJQPGYCNNLCEM6JGſNVGTRTGXGPVUPQKUGCPFECNNGT+&RTQDNGOUECWUGFD[DSL interference. Contact your DSL service provider for more information about &5.ſNVGTUCaller ID entries do not match the numbers I need to dial.Caller ID service delivers 10 digits (the area code plus the seven-digits number). If you need to dial something other 10 digits, see page 39 for instructions on changing the number. If you dial seven digits for local calls, you may want to use the home area code feature (page 13).Out of range OR No pwr at base shows in the handset screen.The handset may be out of range. Move it closer to the telephone base.Make sure the power cord is securely plugged into the telephone base. Use a working electrical outlet not controlled by a wall switch.Reset your telephone by unplugging the power adapter from the telephone base. Disconnect the battery from the cordless handset. Wait for 15 seconds, then plug in the power adapter and reinstall the battery. Place the handset in the telephone base and allow up to one minute for the handset and telephone base to synchronize.Other electronic products may prevent your handset and telephone base from communicating with each other. Install your telephone base as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless telephones.New voicemail and show on the display and I don’t know why. Your telephone has voicemail indication that is separate from the built-in answering system. If New voicemail and appear on the display, then your telephone has received a signal from your telephone service provider that you have a voicemail message waiting for you to retrieve from your telephone service provider. Contact your telephone service provider for more information on how to access your voicemail. ••••••••••
59AppendixTroubleshootingI cannot retrieve voicemail messages. Your telephone has both a built-in answering system and voicemail indication. They are independent features and each alerts you to new messages differently (page 42). If you subscribe to voicemail service from your telephone service provider (charges may apply), contact your telephone service provider for more information on how to access your voicemail. The answering system does not answer after the correct number of rings.Make sure the answering system is on. When the answering system is on, the /ANS ON/OFF light on the telephone base should be lit and ANS ON should show on the handset.If toll saver is selected, the number of rings changes to two when there are new messages waiting (page 16).If the memory is full or if the answering system is off, the answering system answers after 10 rings.In some cases, the answering system is affected by the ringing system used by your telephone service provider.If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail answers (page 42). To determine how many rings will activate your voicemail, please contact your local telephone service provider.If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems.The outgoing announcement is not clear.When recording the announcement, make sure you speak in a normal tone of voice towards the microphone of the handset.Make sure there is no background noise when recording.The answering system does not record messages.Make sure the answering system is on.When the answering machine memory is full, it does not record new messages until some old messages are deleted.If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail answers (page 42). To determine how many rings will activate your voicemail, please contact your local telephone service provider.••••••••••••
60AppendixTroubleshootingIf there is a fax machine connected to the same telephone line, try disconnecting thefax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems.6JGOGUUCIGUQPVJGCPUYGTKPIU[UVGOCTGXGT[FKHſEWNVVQJGCTPress /VOL on the telephone base or /VOL on the handset to increase the speaker volume.The messages on the answering system are incomplete.If a caller leaves a very long message, part of it may be lost when the answering system disconnects the call after four minutes.If the memory on the answering system becomes full during a message, the answering system stops recording and disconnects the call.If the caller’s voice is very soft, the answering system may stop recording and disconnect the call.The answering system does not respond to remote commands.Make sure your remote access code is correct (page 17).Make sure you are calling from a touch-tone telephone. When dialing a number, there should be tones. If there are clicks, then it is not a touch-tone telephone and cannot activate the answering system.The answering system may not detect the remote access code when your announcement is playing. Wait until the announcement is over before entering the code.There may be interference on the telephone line you are using. Press the dial pad MG[UſTON[YJGPFKCNKPII subscribe to a non-traditional telephone service that uses my computer to establish connections, and my telephone doesn’t work.Make sure your computer is powered on.Make sure your Internet connection is working properly.Make sure that the software is installed and running for your non-traditional telephone service. Make sure to plug your USB telephone adapter into a dedicated USB port on your computer. Do not plug into a multiple port USB hub (USB splitter) that is not powered.In a few rare instances, the USB port on your computer may not have enough power. In these instances, try using a USB hub with its own external power supply.+H[QWCTGWUKPICſTGYCNNKVOC[RTGXGPVCEEGUUVQ[QWTPQPVTCFKVKQPCNVGNGRJQPGservice provider. Contact your service provider for more information.•••••••••••••••
61AppendixTroubleshootingCommon cures for electronic equipment.If the telephone is not responding normally, put the cordless handset in the telephone base. If it does not respond, try the following (in the order listed):Disconnect the power to the telephone base.Disconnect the battery on the cordless handset.Wait a few minutes before connecting power to the telephone base.Reinstall the battery and place the cordless handset in the telephone base or charger.Wait for the cordless handset to synchronize with the telephone base. Allow up to one minute for this to take place.••••••
62AppendixImportant safety instructionsWhen using your telephone equipment, basic safety precautions should always be followed to TGFWEGVJGTKUMQHſTGGNGEVTKEUJQEMCPFKPLWT[KPENWFKPIVJGHQNNQYKPIRead and understand all instructions. Follow all warnings and instructions marked on the product.Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water.Do not place this product on an unstable table, shelf, stand or other unstable surfaces.Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This product should not be placed in any area where proper ventilation is not provided. This product should be operated only from the type of power source indicated on the marking NCDGN+H[QWCTGPQVUWTGQHVJGV[RGQHRQYGTUWRRN[KP[QWTJQOGQTQHſEGEQPUWNV[QWTFGCNGTor local power company. Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on. Never push objects of any kind into this product through the slots in the telephone base or handset because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the telephone base or handset other VJCPURGEKſGFCEEGUUFQQTUOC[GZRQUG[QWVQFCPIGTQWUXQNVCIGUQTQVJGTTKUMU+PEQTTGEVreassembling can cause electric shock when the product is subsequently used. Do not overload wall outlets and extension cords. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions:When the power supply cord or plug is damaged or frayed.If liquid has been spilled onto the product. If the product has been exposed to rain or water.If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation.If the product has been dropped and the telephone base and/or handset has been damaged.If the product exhibits a distinct change in performance.Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning.Do not use the telephone to report a gas leak in the vicinity of the leak.Only put the handset of your telephone next to your ear when it is in normal talk mode.6JGRQYGTCFCRVGTUCTGKPVGPFGFVQDGEQTTGEVN[QTKGPVGFKPCXGTVKECNQTƀQQTOQWPVRQUKVKQPThe prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.SAVE THESE INSTRUCTIONS1.2.3.4.5.6.7.8.9.10.11.12.A.B.C.D.E.F.13.14.15.16.
63AppendixPrecautions for users of implanted cardiac pacemakersCardiac pacemakers (applies only to digital cordless telephones):Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:Pacemaker patientsShould keep wireless telephones at least six inches from the pacemaker.Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON.Should use the wireless telephone at the ear opposite the pacemaker.WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones.Operating rangeThis cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance - which can vary with the locations of the telephone base and handset, the weather, and the NC[QWVQH[QWTJQOGQTQHſEGWhen the handset is out of range, the handset displays Out of range OR No pwr at base.If there is a call while the handset is out of range, it might not ring, or if it does ring, the call might not connect well when you press /FLASH. Move closer to the telephone base, then press /FLASH toanswer the call. If the handset moves out of range during a telephone conversation, there might be interference.To improve reception, move closer to the telephone base.•••
64AppendixMaintenanceTaking care of your telephoneYour cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatmentPlace the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid waterYour telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower.Electrical stormsElectrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electrical appliances during storms. Cleaning your telephoneYour telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or a mild soap. Do not use excess water or cleaning solvents of any kind.Remember that electrical appliances can cause serious injury if used when you are wet or standing in the water. If the telephone base should fall into the water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORD FROM THE WALL. Then remove the telephone by the unplugged cords.
65AppendixAbout cordless telephonesPrivacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone base and the cordless handset by radio waves, so there is a possibility that the cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones.Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls cannot be made from the cordless handset if the telephone base is unplugged, switched off or if the electrical power is interrupted. Potential TV interference: Some cordless telephones operate at frequencies that may cause interference to televisions and VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR often reduces or eliminates the interference. Rechargeable batteries: Exercise care in handling batteries in order not to create a short circuit with conducting material such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger.Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture the battery. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.•••••The RBRC® sealThe RBRC® seal on the nickel-metal hydride battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The RBRC® program provides a convenient alternative to placing used nickel-metal hydride batteries into the trash or municipal waste, which may be illegal in your area.VTech’s participation in RBRC®makes it easy for you to drop off the spent battery at local retailers participating in the RBRC® program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERYTM for information on Ni-MH battery recycling and disposal bans/restrictions in your area. VTech’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources.RBRC® is a registered trademark of Rechargeable Battery Recycling Corporation.
66AppendixWarrantyWhat does this limited warranty cover?The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada.What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (“Materially Defective Product”)?During the limited warranty period, VTech’s authorized service representative will repair or replace at VTech’s option, without charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTech’s option, is your exclusive remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or replacement to take approximately 30 days.How long is the limited warranty period?The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer.What is not covered by this limited warranty?This limited warranty does not cover:1. Product that has been subjected to misuse, accident, shipping or other physical damage, KORTQRGTKPUVCNNCVKQPCDPQTOCNQRGTCVKQPQTJCPFNKPIPGINGEVKPWPFCVKQPſTGYCVGTQTQVJGTliquid intrusion; or2TQFWEVVJCVJCUDGGPFCOCIGFFWGVQTGRCKTCNVGTCVKQPQTOQFKſECVKQPD[CP[QPGQVJGTVJCPan authorized service representative of VTech; or3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or4. Product to the extent that the problem is caused by use with non-VTech accessories; or5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or7. Product returned without a valid proof of purchase (see item 2 below); or8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.
67AppendixHow do you get warranty service?To obtain warranty service in the United States of America, visit www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377. NOTE: Before calling for service, please review the user’s manual - a check of the Product’s controls and features may save you a service call.Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty.What must you return with the Product to get warranty service?Return the entire original package and contents including the Product to the VTech service NQECVKQPCNQPIYKVJCFGUETKRVKQPQHVJGOCNHWPEVKQPQTFKHſEWNV[CPFInclude a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and3. Provide your name, complete and correct mailing address, and telephone number.Other limitationsThis warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTech’s responsibilities regarding the 2TQFWEV6JGTGCTGPQQVJGTGZRTGUUYCTTCPVKGU0QQPGKUCWVJQTK\GFVQOCMGOQFKſECVKQPUVQVJKUNKOKVGFYCTTCPV[CPF[QWUJQWNFPQVTGN[QPCP[UWEJOQFKſECVKQP5VCVG2TQXKPEKCN.CY4KIJVU6JKUYCTTCPV[IKXGU[QWURGEKſENGICNTKIJVUCPF[QWOC[CNUQJCXGother rights, which vary from state to state or province to province..KOKVCVKQPU+ORNKGFYCTTCPVKGUKPENWFKPIVJQUGQHſVPGUUHQTCRCTVKEWNCTRWTRQUGCPFOGTEJCPVCDKNKV[CPWPYTKVVGPYCTTCPV[VJCVVJG2TQFWEVKUſVHQTQTFKPCT[WUGCTGNKOKVGFVQQPGyear from the date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not NKOKVGFVQNQUVRTQſVUQTTGXGPWGKPCDKNKV[VQWUGVJG2TQFWEVQTQVJGTCUUQEKCVGFGSWKROGPVVJGcost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.Please retain your original sales receipt as proof of purchase.1.2.Warranty (continued)
68AppendixFCC, ACTA and IC regulationsFCC Part 15This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.%JCPIGUQTOQFKſECVKQPUVQVJKUGSWKROGPVPQVGZRTGUUN[CRRTQXGFD[VJGRCTV[TGURQPUKDNGHQTcompliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone.To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more.This Class B digital apparatus complies with Canadian ICES-003.FCC Part 68 and ACTAThis equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this GSWKROGPVEQPVCKPUCOQPIQVJGTVJKPIUCRTQFWEVKFGPVKſGTKPVJGHQTOCV75###'36::::6JKUKFGPVKſGTOWUVDGRTQXKFGFVQ[QWTVGNGRJQPGUGTXKEGRTQXKFGTWRQPTGSWGUVThe plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See Installation Instructions in the user’s manual.The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is GPEQFGFCUVJGVJCPFVJEJCTCEVGTUHQNNQYKPIVJG75KPVJGRTQFWEVKFGPVKſGTGIKHKUVJG4'0KU+POQUVDWVPQVCNNCTGCUVJGUWOQHCNN4'0UUJQWNFDGſXGQTNGUU(QTOQTGinformation, please contact your telephone service provider.••••
69AppendixThis equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, EQPUWNV[QWTVGNGRJQPGUGTXKEGRTQXKFGTQTCSWCNKſGFKPUVCNNGTIf this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty.If this equipment is causing harm to the telephone network, your telephone service provider may temporarily discontinue your telephone service. Your telephone service provider is required to PQVKH[[QWDGHQTGKPVGTTWRVKPIUGTXKEG+HCFXCPEGPQVKEGKUPQVRTCEVKECN[QWYKNNDGPQVKſGFCUUQQPas possible. You will be given the opportunity to correct the problem and your telephone service RTQXKFGTKUTGSWKTGFVQKPHQTO[QWQH[QWTTKIJVVQſNGCEQORNCKPVYKVJVJG(%%;QWTVGNGRJQPGservice provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. Your telephone service provider is required to notify you if such changes are planned.If this product is equipped with a corded or cordless handset, it is hearing aid compatible.If this product has memory dialing locations, you may choose to store emergency telephone PWODGTUGIRQNKEGſTGOGFKECNKPVJGUGNQECVKQPU+H[QWFQUVQTGQTVGUVGOGTIGPE[PWODGTUplease:4GOCKPQPVJGNKPGCPFDTKGƀ[GZRNCKPVJGTGCUQPHQTVJGECNNDGHQTGJCPIKPIWRPerform such activities in off-peak hours, such as early morning or late evening.Industry CanadaOperation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation.6JGVGTOŎŏ+%ŎŏDGHQTGVJGEGTVKſECVKQPTGIKUVTCVKQPPWODGTQPN[UKIPKſGUVJCVVJG+PFWUVT[%CPCFCVGEJPKECNURGEKſECVKQPUYGTGOGVThe Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the TGSWKTGOGPVVJCVVJGUWOQHVJG4'0UQHCNNVJGFGXKEGUFQGUPQVGZEGGFſXG6JKURTQFWEVOGGVUVJGCRRNKECDNG+PFWUVT[%CPCFCVGEJPKECNURGEKſECVKQPUFCC, ACTA and IC regulations (continued)
70AppendixFrequency ControlCrystal controlled PLL synthesizerTransmit frequencyHandset: 1921.536-1928.448 MHzTelephone base: 1921.536-1928.448 MHzChannels 5Nominal effective rangeMaximum power allowed by FCC and IC. Actual operating range might vary according to environmental conditions at the time of use.Size Handset: 6.35 X 1.83 X 1.16 in (161.38 X 46.40 X 28.39 mm)Telephone base: 6.11 X 3.54 X 2.75 in (155.20 X 90.00 X 69.90 mm)Charger: 2.92 X 3.06 X 2.20 in (74.20 X 77.80 X 56.00 mm)Weight Handset: 4.73oz (134.20g) (including battery)Telephone base: 8.01oz (227.20g)Charger: 1.80oz (51.00g)Power requirementsHandset: 2.4V 400mAh Ni-MH batteryTelephone base: 6V DC @ 400mACharger: 6V AC @ 300mAMemory Handset directory: 50 memory locations; up to 30 digits and 15 characters Handset call log: 50 memory locations; up to 24 digits and 15 characters6GEJPKECNURGEKſECVKQPU
71IndexAAbout cordless telephones 58Add a handset 46Alphabetical search 27Announcement 16Answer a call 18Answer an incoming call during an intercom call 22Answering system and voicemail 36Answering system setup 14Answer ON/OFF 14BBattery 4,45CCaller ID 30Call intercept 37Call log 31Call log display screen messages 35Call screening 15Call waiting 20Chain dialing 20Character chart 26Charging 4Clear voicemail 11DDate and time 12Delete announcement 17Delete answering system messages 38Delete from redial list 21Delete from the call log 35Delete from the directory 28Dial a call log entry 33Dial a directory entry 27Dial a redial entry 21Dial a speed dial number 29Dialing pause 18,25Dial mode 13Directory 24&5.ſNVGT2EEdit a directory entry 28End a call 18Expand your telephone system 46FFCC, ACTA and IC regulations 61Find handset 19HHandset display screen messages 42,43Handset icons 44Handset lights 44Home area code 13IImportant safety instructions 55Installation 2,3,5Intercom 22KKey tone 12LLayout 7,8,9LCD language 11MMaintenance 57Make a call 18Make a call using speed dial 18Memory match 31Message alert tone 16Message capacity 36Message playback 37,38Message window displays 40Missed calls indicator 32Multiple handset use 21Mute 19
72IndexNNew message indication 37Number of rings 15OOperating range 56PParts checklist 1Phonebook 24Play announcement 17Precautions for users of implanted cardiac pacemakers 56Predial a call 18RRecord and play memos 39Record announcement 17Redial list 21Register a handset 46Remote access 41Remote access code 16Replace a handset 47Review the call log 32Ringer tone 10Ringer volume (handset) 10Ringer volume (telephone base) 10SSave a call log entry to the directory 34Search the directory 27Share an outside call 23Silence the ringer 19Speakerphone 18Speed dial 29Store a directory entry 25Store a speed dial entry 29Store from redial 25T6GEJPKECNURGEKſECVKQPU63Telephone base installation 2Telephone base layout 7Telephone base lights 44Temporary tone dialing 19The RBRC seal 58Troubleshooting 48VView dialing options 33Voicemail 11,36Volume 10,18WWall-mounting 5Wall-mount installation 5Warranty 59,60
VTECH TELECOMMUNICATIONS LTD.A member of THE VTECH GROUP OF COMPANIES.Distributed in the U.S.A. by VTech Communications, Inc. Beaverton, Oregon 97008Distributed in Canada by VTech Technologies Canada, Ltd., Richmond, B.C. V6W 1L5Copyright © 2009 for VTECH TELECOMMUNICATIONS LTD.Printed in China.91-002897-010-100

Navigation menu