VTech Telecommunications 80-9423-00 1.9GHz DECT Cordless Phone with BT - Base Bluetooth User Manual DS6621 X ACIB V2 APPRVOAL 20140211

VTech Telecommunications Ltd 1.9GHz DECT Cordless Phone with BT - Base Bluetooth DS6621 X ACIB V2 APPRVOAL 20140211

Contents

User Manual (DS6621)

Download: VTech Telecommunications 80-9423-00 1.9GHz DECT Cordless Phone with BT - Base Bluetooth User Manual DS6621 X ACIB V2 APPRVOAL 20140211
Mirror Download [FCC.gov]VTech Telecommunications 80-9423-00 1.9GHz DECT Cordless Phone with BT - Base Bluetooth User Manual DS6621 X ACIB V2 APPRVOAL 20140211
Document ID2213000
Application IDug0ye2f7sKRcBy5/EiA4kw==
Document DescriptionUser Manual (DS6621)
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize105.94kB (1324228 bits)
Date Submitted2014-03-12 00:00:00
Date Available2014-03-12 00:00:00
Creation Date2014-03-06 20:34:24
Producing SoftwareAcrobat Distiller 10.0.0 (Windows)
Document Lastmod2014-03-06 20:34:24
Document TitleDS6621-X_ACIB_V2_APPRVOAL_20140211.pdf
Document CreatorAdobe InDesign CS2 (4.0)
Document Author: stanleyl

%4
%4
%4
%4
DECT 6.0 cordless telephone with
BLUETOOTHÂŽ wireless technology
#$
"CSJEHFEVTFSmTNBOVBM
$POHSBUVMBUJPOT
on purchasing your new VTech product. Before using this telephone, please
read *NQPSUBOUTBGFUZJOTUSVDUJPOT.
To protect our environment and conserve natural resources, this Abridged
user’s manual provides you with the basic installation and use instructions.
A limited set of features are described in abbreviated form.
Please refer to the online Complete user’s manual for a full set of installation
and operation instructions at XXXWUFDIQIPOFTDPN.
3FHJTUFSPOMJOFUPHFUBOBEEJUJPOBMNPOUIXBSSBOUZ
7JTJUXXXWUFDIQIPOFTDPN
3FHJTUSBUJPO
Register your product online for enhanced warranty support.
1SPEVDUOFXT
Learn about the latest VTech products.
Compatible with
Hearing Aid T-Coil
Telephones identied with this logo have reduced noise and
interference when used with most T-coil equipped hearing
aids and cochlear implants. The TIA-1083 Compliant Logo is
a trademark of the Telecommunications Industry Association.
Used under license.
TIA-1083
ÂŽ
The ENERGY STAR program (www.energystar.gov) recognizes
and encourages the use of products that save energy and help
protect our environment. We are proud to mark this product with
ÂŽ
the ENERGY STAR label indicating it meets the latest energy
efciency guidelines.
1BSUTDIFDLMJTU
Handset
Telephone base
power adapter
Telephone base
(1 for DS6621)
(2 for DS6621-2)
(3 for DS6621-3)
(4 for DS6621-4)
(1 for DS6621-2)
(2 for DS6621-3)
(3 for DS6621-4)
Abridged user’s manual
Quick Start Guide
Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / FabriquĂŠ en chine
CR1232
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Telephone line
cord
Charger and
charger adapter
Battery
(1 for DS6621)
(2 for DS6621-2)
(3 for DS6621-3)
(4 for DS6621-4)
Wall mount
bracket
Abridged user’s
manual
Quick Start
Guide
*NQPSUBOU4BGFUZ*OTUSVDUJPOT
When using your telephone equipment, basic safety precautions should always be followed to
reduce the risk of re, electric shock and injury, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
4. Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub
or swimming pool, or in a wet basement or shower.
5. Do not place this product on an unstable table, shelf, stand or other unstable surfaces.
6. Slots and openings in the back or bottom of the telephone base and handset are provided for
ventilation. To protect them from overheating, these openings must not be blocked by placing the
product on a soft surface such as a bed, sofa or rug. This product should never be placed near
or over a radiator or heat register. This product should not be placed in any area where proper
ventilation is not provided.
7. This product should be operated only from the type of power source indicated on the marking label. If you
are not sure of the type of power supply in your home or ofce, consult your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on.
9. Never push objects of any kind into this product through the slots in the telephone base or
handset because they may touch dangerous voltage points or create a short circuit. Never spill
liquid of any kind on the product.
10. To reduce the risk of electric shock, do not disassemble this product, but take it to an
authorized service facility. Opening or removing parts of the telephone base or handset other
than specied access doors may expose you to dangerous voltages or other risks. Incorrect
reassembling can cause electric shock when the product is subsequently used.
11. Do not overload wall outlets and extension cords.
12. Unplug this product from the wall outlet and refer servicing to an authorized service facility
under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If liquid has been spilled onto the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operation instructions. Improper adjustment of other controls may
result in damage and often requires extensive work by an authorized technician to restore the
product to normal operation.
• If the product has been dropped and the telephone base and/or handset has been damaged.
• If the product exhibits a distinct change in performance.
13. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk
of electric shock from lightning.
14. Do not use the telephone to report a gas leak in the vicinity of the leak. Under certain
circumstances, a spark may be created when the adapter is plugged into the power outlet,
or when the handset is replaced in its cradle. This is a common event associated with the
closing of any electrical circuit. The user should not plug the phone into a power outlet, and
should not put a charged handset into the cradle, if the phone is located in an environment
containing concentrations of flammable or flame-supporting gases, unless there is adequate
ventilation. A spark in such an environment could create a re or explosion. Such environments
might include: medical use of oxygen without adequate ventilation; industrial gases (cleaning
solvents; gasoline vapors; etc.); a leak of natural gas; etc.
15. Only put the handset of your telephone next to your ear when it is in normal talk mode.
16. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs
are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.
4"7&5)&4&*/4536$5*0/4
1SFDBVUJPOTGPSVTFSTPGJNQMBOUFEDBSEJBDQBDFNBLFST
Cardiac pacemakers (applies only to digital cordless telephones):
Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary
evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers.
Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:
1BDFNBLFSQBUJFOUT
• Should keep wireless telephones at least six inches from the pacemaker.
• Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket,
when it is turned ON.
• Should use the wireless telephone at the ear opposite the pacemaker. WTR’s evaluation did not
identify any risk to bystanders with pacemakers from other persons using wireless telephones.
WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using
wireless telephones.
"CPVUDPSEMFTTUFMFQIPOFT
p 1SJWBDZ The same features that make a cordless telephone convenient create some limitations.
Telephone calls are transmitted between the telephone base and the cordless handset by radio
waves, so there is a possibility that the cordless telephone conversations could be intercepted by
radio receiving equipment within range of the cordless handset. For this reason, you should not
think of cordless telephone conversations as being as private as those on corded telephones.
p &MFDUSJDBMQPXFSThe telephone base of this cordless telephone must be connected to a
working electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls
cannot be made from the cordless handset if the telephone base is unplugged, switched off or if
the electrical power is interrupted.
p 1PUFOUJBM57JOUFSGFSFODFSome cordless telephones operate at frequencies that may cause
interference to televisions and VCRs. To minimize or prevent such interference, do not place
the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is
experienced, moving the cordless telephone farther away from the TV or VCR often reduces or
eliminates the interference.
p 3FDIBSHFBCMFCBUUFSJFT Exercise care in handling batteries in order not to create a short
circuit with conducting material such as rings, bracelets, and keys. The battery or conductor may
overheat and cause harm. Observe proper polarity between the battery and the battery charger.
p /JDLFMNFUBMIZESJEFSFDIBSHFBCMFCBUUFSJFTDispose of these batteries in a safe manner.
Do not burn or puncture the battery. Like other batteries of this type, if burned or punctured, they
could release caustic material which could cause injury.
$POOFDU
$POOFDUUIFUFMFQIPOFCBTFBOEIBOETFUDIBSHFS
Click!
Plug!
Plug!
DSL
Plug!
Click!
• Use only the power adapters supplied with this product.
• Even if you do not subscribe to any conventional telephone service, you can pair
a Bluetooth enabled cell phone to your telephone base (see #MVFUPPUI), and use
the cell line alone without plugging in a telephone line cord.
• If you subscribe to telephone service from a cable company or a VoIP service
provider, contact your cable/VoIP service provider for more information.
*OTUBMMUIFCBUUFSZ
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / FabriquĂŠ en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / FabriquĂŠ en chine
• Use only the battery provided or equivalent.
• If the handset will not be used for a long time, disconnect and remove the battery to
prevent possible leakage.
• To purchase a replacement battery, visit our website at XXXWUFDIQIPOFTDPN
or call   . In Canada, go to XXXWUFDIDBOBEBDPN or call
  .
$IBSHFUIFCBUUFSZ
$)"3(& light
remains on
when charging.
Once you have installed the battery, the screen indicates the battery status (see the
table on the next page).
• For best performance, keep the handset in the telephone base or charger when
not in use.
• The battery is fully charged after 12 hours of continuous charging.
#BUUFSZJOEJDBUPST
#BUUFSZTUBUVT
"DUJPO
The screen is blank, or shows
1VUJODIBSHFS and flashes.
The battery has no charge
or very little charge. The
handset cannot be used.
Charge without interruption
(at least 30 minutes).
The screen shows
-PXCBUUFSZ and flashes.
The battery has enough charge
to be used for a short time.
Charge without interruption
(at least 30 minutes).
The screen shows
)"/%4&59.
The battery is charged.
To keep the battery
charged, place it in the
telephone base or charger
when not in use.
• If you place the handset in the telephone base or charger without plugging in the
battery, the screen displays /PCBUUFSZ.
5BCMFUPQUPXBMMNPVOUJOTUBMMBUJPO
The telephone comes ready for tabletop use. If you have already installed the
telephone for tabletop use, unplug the telephone line cord from the telephone
wall jack, and unplug the telephone base power adapter from the wall outlet
before mounting your telephone on a wall. Follow the steps below to mount your
telephone on a wall.
1. Route the telephone line cord
through the rectangular hole on the
wall mount bracket. Then plug the
two ends of the telephone line cord
into the telephone base and the wall
outlet as shown.
2 Align the holes on the bracket with
the standard wall plate and slide the
bracket down until it clicks securely
in place.
3. Align the grooves on the telephone
base with the tabs on the wall mount
bracket, and then slide it down until it
clicks securely in place.
4. Connect the power adapter to the
telephone base and an electrical
outlet not controlled by a wall switch.
#FGPSFVTF
Check for a dial tone by pressing )0.&. If you hear a dial tone, the installation is successful.
*GZPVEPOPUIFBSBEJBMUPOF
• Make sure the installation procedures described above are properly done.
• It may be a wiring problem. If you have changed your telephone service to digital service from a
cable company or a VoIP service provider, the telephone line may need to be rewired to allow all
existing telephone jacks to work. Contact your cable/VoIP service provider for more information.
0QFSBUJOHSBOHF
This cordless telephone operates with the maximum power allowed by the Federal Communications
Commission (FCC). Even so, this handset and telephone base can communicate over only a certain
distance - which can vary with the locations of the telephone base and handset, the weather, and the
layout of your home or ofce.
When the handset is out of range, the handset displays 0VUPGSBOHFandOPQXSBUCBTF alternately.
If there is a call while the handset is out of range, it may not ring, or if it does ring, the call may not
connect well when you press )0.& or $&--.Move closer to the telephone base, and then
press )0.& or $&-- to answer the call. If the handset moves out of range during a telephone
conversation, there may be interference. To improve reception, move closer to the telephone base.
)BOETFUPWFSWJFX

















 q$)"3(& MJHIU
• On when the handset is charging.
•
q.&/64&-&$5
• Show the menu.
• While in a menu, press to select an
item, or save an entry or setting.
 q)BOETFUFBSQJFDF
 q-$%EJTQMBZ
 q70-6.&  
• Review the phonebook when the
phone is not in use.
• Increase the listening volume
during a call or message playback.
• Scroll up while in a menu, or in the
phonebook, caller ID log, or redial list.
• Move the cursor to the right when
entering numbers or names.
q0''$"/$&-
• Hang up a call.
• Silence the ringer temporarily
while the handset is ringing.
• Press and hold to erase the
missed call indicator while the
phone is not in use.
• Press to return to the previous
menu, or press and hold to return
to idle mode, without making
changes.
 q
$&--
Make or answer a cell call.
Answer an incoming cell call
when you hear a call waiting alert.
 q )0.&'-"4)
• Make or answer a home call.
• Answer an incoming home call
when you hear a call waiting alert.
•
•
 q
•
•
q70-6.& $*%
• Review the caller ID log when the
phone is not in use.
• Decrease the listening volume
during a call or message
playback.
• Scroll down while in a menu, or in
the phonebook, caller ID log, or
redial list.
• Move the cursor to the left when
entering numbers or names.
Press repeatedly to add or
remove 1 in front of the caller ID
log entry before dialing or saving
it to the phonebook.
Press and hold to set or dial your
voicemail number.
q
•
 q
•
•
Press to add a space when
entering names.
While you have set the dial mode
to pulse and on a call, press to
switch to tone dialing temporarily.
q
Make or answer a call using the
handset speakerphone.
During a call, press to switch
between the speakerphone and
the handset.
q.65&%&-&5&
• Mute the microphone during a call.
• Delete digits or characters while
using the dialing keys.
• Silence the ringer temporarily
while the handset is ringing.
•
 q
•
Press and hold to insert a dialing
pause while entering a number.
q3&%*"-1"64&
• Press repeatedly to review the
redial list.
Press repeatedly to show other
dialing options when reviewing a
caller ID log entry.
q.JDSPQIPOF
5FMFQIPOFCBTFPWFSWJFX












 q*/64& MJHIU
• On when the handset is in use,
or the answering system is
answering a call.
• Flashes when there is an incoming
call, or another telephone sharing
the same line is in use.
 qq70-
• Adjust the volume during
message playback.
• Adjust the telephone base ringer
volume when the phone is not in use.
 q.FTTBHFXJOEPX
• Shows the number of messages, and
other information of the answering
system or telephone base.
 q9%&-&5&
• Delete the playing message.
• Press twice to delete all previously
reviewed messages when the
phone is not in use.
 q
•
•
 q '*/%)"/%4&5
• Press to page all system handsets.
q 4,*1
• Skip to the next message
 q 3&1&"5
• Press to repeat a message.
• Press twice to play the previous
message.
q "/40/MJHIUT
• On when the answering system is on.
q $&--BOE $&--)&"%4&5MJHIUT
• On when the telephone base
is paired and connected with a
Bluetooth device.
• Flashes when the telephone base
is in discoverable mode.
 q "/40/
• Turn the answering system on or off.
 q
1-":4501
Play messages.
Stop playing messages.
$&--BOE $&--)&"%4&5
Press to connect the paired
Bluetooth device.
• Press and hold to add or replace a
Bluetooth device.
•
#MVFUPPUI
1BJSBOEDPOOFDUZPVS#MVFUPPUIFOBCMFEDFMMQIPOF
To use a Bluetooth enabled cell phone with your %4, you must rst pair and
connect your Bluetooth cell phone(s) with the telephone base. All %4 handsets
can be used to make or answer calls on the cell line.
Bluetooth wireless technology operates within a short range (a maximum of
approximately 30 feet). When you pair a Bluetooth cell phone to the telephone
base, place your Bluetooth cell phone closer to the telephone base to maintain
sufcient signal strength. For optimal performance, keep your cell phone within
15 feet of the telephone base while using the cell line.
1. Choose a slot to pair the cell phone. Press and hold $&--or
$&--)&"%4&5 on the telephone base until you hear a conrmation tone,
and the $&--or $&--)&"%4&5 light flashes.
2. Turn on the Bluetooth feature of your cell phone. Once your cell phone nds
your VTech phone (75FDI%4), press appropriate key on your cell phone
to continue the pairing process.
• Your cell phone may prompt you to enter the PIN of the telephone base.
The default PIN of the telephone base is .
When the cell phone is connected to the telephone base, the corresponding status
icon ( or  ) displays. The corresponding device light ( $&-- or
$&--)&"%4&5) turns on.
If the pairing fails, turn off the Bluetooth feature on your cell phone and on the
%4 by pressing $&-- or $&--)&"%4&5. Then repeat the steps
above to pair and connect again. In some cases, it may take you a few attempts to
complete the pairing process.
1BJSBOEDPOOFDUZPVS#MVFUPPUIFOBCMFEIFBETFU
1. Press .&/6 on the phone when it is not in use.
2. Press
or
to scroll to #MVFUPPUI, and then press 4&-&$5.
3. Press
or
to scroll to "EE#5IFBETFU, and then press 4&-&$5. The
screen displays 4FBSDIIFBETFU
4. Set your headset to discoverable mode. Once your handset nds your
headset, press 4&-&$5.
• Enter the PIN of your headset if required. The PIN for most Bluetooth devices
is  (refer to the user’s manual of your headset), and then press 4&-&$5.
When the headset is successfully paired and connected to the telephone base, the
icon displays. The $&--)&"%4&5 light turns on.
5.
75FDI$POOFDUUP$FMM BQQMJDBUJPO
This application helps you integrate your Android phones with your %4.
For more information and application download, go to
IUUQXXXWUFDIQIPOFTDPNBQQ@DPOOFDU@UP@DFMM
%PXOMPBEDPOUBDUTGSPNZPVS#MVFUPPUIDFMMQIPOF
1.
2.
3.
4.
Press .&/6 when the phone is not in use.
Scroll to #MVFUPPUI, and then press 4&-&$5.
Scroll to %PXOMPBE1#, and then press 4&-&$5.
Scroll to select the desired cell phone, and then press 4&-&$5.
• For certain cell phones, you may need to press a key on your cell phone to
conrm the phonebook download.
• The performance of phonebook download feature depends on the compatibility of
your Bluetooth cell phone. Refer to the user’s manual of your cell phone for more
information about how that device uses Bluetooth connectivity.
• Certain cell phones do not support SIM card download. If this is the case, transfer the
contacts from your SIM card to your cell phone memory rst. Then download from
your cell phone memory. For more information on how to transfer contacts from
your SIM card to your cell phone memory, see the user’s manual of your cell phone.
• For Android cell phones, you may also download your cell phone
contactsto your %4 via the VTech Contact Share application.
Scan the QR code on the right, or go to
XXXWUFDIQIPOFTDPNBQQTDPOUBDU@TIBSF for application download.
6TJOHUIFIBOETFUNFOV
1.
2.
3.
•
•
Press .&/6 when the phone is not in use.
or until the screen displays the desired feature menu.
Press
Press 4&-&$5 to enter that menu.
To return to the previous menu, press $"/$&-.
To return to idle mode, press and hold $"/$&-.
5FMFQIPOFTFUUJOHT
Default settings are indicated by asterisks(*).
4FUUJOHTNFOV
%FTDSJQUJPO
-$%MBOHVBHF
Set the screen display language.
7PJDFNBJM
Save the speed dial voicemail number to 1
0QUJPOT
&OHMJTI
'SBOÂżBJT
&TQBĂąPM
7PJDFNBJM
$MSWPJDFNBJM
Turn off the voicemail indicators (see the note below).
/"
,FZUPOF
Turn an audible beep on or off whenever a key
is pressed.
,FZUPOF0O
,FZUPOF0GG
)PNFBSFBDPEF
Enter your home area code if you dial only
seven digits for local calls.
)PNFBSFBDPEF
@@@
%JBMNPEF
Set the telephone to be touch-tone or
pulse dialing.
5PVDIUPOF
1VMTF
Use the $MSWPJDFNBJM feature when the telephone indicates there is new voicemail
but there is none. For example, when you have accessed your voicemail while away
from home. The $MSWPJDFNBJM feature only turns off the indicators; it does not delete
your voicemail messages. As long as you have new voicemail messages, your
telephone service provider continues to send the signal that turns on the indicators.
The following are some of the telephone features you may wish to set.
3JOHFSWPMVNF IBOETFU
You can adjust the ringer volume level, or turn the ringer off.
1. Press .&/6 when the handset is not in use.
2. Scroll to 3JOHFST, and then press 4&-&$5.
3. Scroll to choose )PNFWPMVNF or $FMMWPMVNF, and then press 4&-&$5.
4. Press
or
to adjust the volume, and then press 4&-&$5 to save.
If the handset ringer volume is set to off, that handset is silenced for all incoming
calls except paging tone.
3JOHFSUPOF IBOETFU
You can choose from different ringer tones.
1. Press .&/6 when the handset is not in use.
2. Scroll to 3JOHFST, and then press 4&-&$5.
3. Scroll to choose )PNFSJOHUPOF or $FMMSJOHUPOF, and then press 4&-&$5.
or
to sample each ringer tone, and then press 4&-&$5 to save.
4. Press
If you turn off the ringer volume, you will not hear ringer tone samples.
4FUEBUFBOEUJNF
If you subscribe to caller ID service, the day, month, and time are set automatically
with each incoming call. You can also set the date and time manually.
1. Press .&/6 when the handset is not in use.
2. Scroll to 4FUEBUFUJNF, and then press 4&-&$5.
3. Use the dialing keys (-) to enter the month, date, and year, and then
press 4&-&$5.
4. Use the dialing keys (-) to enter the hour and minute.
or
to choose ". or 1., and then press 4&-&$5 to save.
5. Press
5FMFQIPOFPQFSBUJPO
.BLFBIPNFDBMM
• Press
)0.& or
, and then dial the telephone number.
.BLFBDFMMDBMM
• Press $&--. Enter the telephone number and then press
03
• Enter the telephone number and then press $&-- to dial.
$&-- to dial.
• After first pressing
$&--, you may need to choose a cell device. Scroll to
select the desired cell device when necessary, and then press 4&-&$5.
• While using the cell line, place your cell phone closer to the telephone base, and
make sure that there are no physical obstacles between the telephone base and
the cell phone, such as large furniture or thick walls.
"OTXFSBIPNFDFMMDBMM
• Press
)0.&,
$&--, , or any dialing key.
&OEBIPNFDFMMDBMM
• Press0'', or put the handset to the telephone base or charger.
4QFBLFSQIPOF
• During a call, press
to switch between speakerphone and normal handset use.
7PMVNF
• During a call, press 70-6.&
or 70-6.&
to adjust the listening volume.
The handset earpiece volume setting and speakerphone volume setting are independent.
.VUF
The mute function allows you to hear the other party but the other party cannot hear you.
1. During a call, press .65&. The handset displays .VUFE.
2. Press .65& again to resume the conversation. The handset displays
.JDSPQIPOFPO.
$BMMXBJUJOH
When you subscribe to call waiting service from your telephone service provider,
you hear an alert tone if there is an incoming call while you are on another call.
$BMMXBJUJOHPOUIFIPNFMJOF
• Press '-"4) to put the current call on hold and take the new call.
• Press '-"4) to switch back and forth between calls.
$BMMXBJUJOHPOUIFDFMMMJOF
• Press $&-- to put the current call on hold and take the new call.
• Press $&-- to switch back and forth between calls.
5FNQPSBSZSJOHFSTJMFODJOH
When the telephone is ringing, you can temporarily silence the ringer of the handset
without disconnecting the call. The next call rings normally at the preset volume.
• Press 0'' or .65&on the handset. The handset displays 
5FNQPSBSZUPOFEJBMJOH
If you have pulse (rotary) service only, you can switch from pulse to tone dialing
temporarily during a call.
1. During a call, press
2. Use the dialing keys to enter the relevant number. The telephone sends touch-tone
signals. It automatically returns to pulse dialing mode after you end the call.
'JOEIBOETFU
Use this feature to nd all system handsets.
5PTUBSUQBHJOH
• Press '*/%)"/%4&5 on the telephone base. All idle handsets ring and
display 1BHJOH .
5PFOEQBHJOH
• Press '*/%)"/%4&5 again on the telephone base.
03
• Press )0.&, $&--, , $"/$&-, or any dialing key on the handset.
03
• Place the handset in the telephone base or charger.
Do not press and hold '*/%)"/%4&5 for more than four seconds. It may lead to
handset deregistration.
3FEJBMMJTU
Each handset stores the last 10 telephone numbers dialed. When there are
already 10 entries, the oldest entry is deleted to make room for the new entry.
5PSFWJFXBOEEJBMBOVNCFSGSPNUIFSFEJBMMJTU
1. Press 3&%*"- when the handset is not in use.
2. Press , , or 3&%*"- repeatedly until the desired entry displays.
3. Press )0.&, $&--, or to dial.
5PEFMFUFBSFEJBMFOUSZ
When the desired redial entry displays, press %&-&5&.
+PJOBDBMMJOQSPHSFTT
You can use up to two system handsets at a time on a home line call. You can buy
additional expansion handsets (%4) for this telephone base. You can register
up to ve handsets to the telephone base.
• When a handset is on a home call, press )0.&or on another handset to
join the call.
• Press 0'' to exit the call. The call continues until all handsets hang up.
*OUFSDPN
Use the intercom features for conversations between two devices.
1. Press.&/6 on your handset when not in use.
2. Press
or to scroll to *OUFSDPN, and then press 4&-&$5. Use the dialing
keys to enter a destination device number.
3. To answer the intercom call, press )0.&, $&--, , or any dialing key
on the destination handset.
4. To end the intercom call, press 0'' or place the handset back in the telephone
base or charger.
5SBOTGFSBDBMM
While on an outside call, you can use the intercom feature to transfer the call from
one handset to another.
1. Press.&/6 on your handset during a call.
or to scroll to *OUFSDPN, and then press 4&-&$5. The current call is
2. Press
put on hold. Use the dialing keys to enter a destination device number.
3. To answer the intercom call, press )0.&, $&--, , or any dialing key
on the destination handset. You can now have a private conservation before
transferring the call.
4. To transfer the call, press 0'' on the initiating handset or place the initiating
handset back in the telephone base or charger.
5. To end the call, press 0'' on the destination handset or place the destination
handset back in the telephone base or charger.
"OTXFSBOJODPNJOHDBMMEVSJOHBOJOUFSDPNDBMM
If you receive an incoming call during an intercom call, there is an alert tone.
• To answer a home call, press )0.&. The intercom call ends automatically.
• To end the intercom call without answering the outside call, press0''. The
intercom call ends and the telephone continues to ring.
• To answer a cell call, press 0'' to end the intercom call. The telephone
continues to ring. Then press
$&--.
1IPOFCPPL
The phonebook can store up to 1000 entries and are shared by all system handsets.
5PBEEBQIPOFCPPLFOUSZ
1. Press .&/6 when the phone is not in use.
2. Scroll to 1IPOFCPPL then press 4&-&$5.
3. Press 4&-&$5 again to choose "EEOFXFOUSZ.
4. Enter the number.
• Use the dialing keys to enter the number (up to 30 digits).
5. Press 4&-&$5 to move to the name.
6. Use the dialing keys to enter the name (up to 15 characters). Additional key presses
show other characters of that particular key.
7. Press 4&-&$5 to save.
While entering numbers and names, you can:
• Press%&-&5& to erase a digit or character.
• Press and hold %&-&5& to erase the entire entry.
or
to move the cursor to the left or right.
• Press
• Press and hold 1"64& to insert a dialing pause (for entering phone numbers only).
• Press  to add a space (for entering names only).
to add ( appears) or
to add ( appears) (for entering phone
• Press
numbers only).
5PSFWJFXBOEEJBMGSPNUIFQIPOFCPPL
Entries are sorted alphabetically.
when the phone is not in use.
1. Press
2. Scroll to browse through the phonebook, or use the dialing keys to start a
name search (you can enter up to 3 characters for the search).
3. When the desired entry appears, press )0.&, $&--, or to dial.
5PFEJUBQIPOFCPPLFOUSZ
1. When the desired entry displays, press 4&-&$5.
2. Use the dialing keys to edit the number, and then press 4&-&$5.
3. Use the dialing keys to edit the name, and then press 4&-&$5 to save.
5PEFMFUFBQIPOFCPPLFOUSZ
1. When the desired entry displays, press %&-&5&.
2. When the screen displays %FMFUFFOUSZ , press4&-&$5.
5PEFMFUFBMMQIPOFCPPLFOUSJFT
1. Press .&/6 when the phone is not in use.
2. Scroll to 1IPOFCPPL, and then press 4&-&$5.
3. Scroll to %FMFUFBMM, and then press 4&-&$5
4. When the screen displays %FMFUFBMM , press 4&-&$5.
$BMMFS*%
This product supports caller ID services provided by most telephone service providers.
Depending on your service subscription, you may see the caller’s name, number, date and
time of calls that are sent by your telephone service provider after the rst or second ring.
$BMMFS*%MPH
The caller ID log stores up to 50 entries. If you answer a call before the caller
information appears, it will not be saved in the caller ID log.
• The handset displays 99NJTTFEDBMMT when there are calls that have not been
reviewed in the caller ID log.
• If you want to erase the missed call indicator, press and hold $"/$&-on the
idle handset.
5PSFWJFXBOEEJBMBOVNCFSJOUIFDBMMFS*%MPH
1. Press $*% when the phone is not in use.
2. Scroll to browse through the caller ID log. When the desired entry appears:
repeatedly to show different dialing options.
• Press
• Press  repeatedly if you need to add or remove 1 in front of the
phone number.
3. Press )0.&, , or $&-- to dial the displayed number.
5PTBWFBDBMMFS*%MPHFOUSZUPUIFQIPOFCPPL
1. When the desired caller ID log entry displays, press 4&-&$5.
2. Scroll to 5P1IPOFCPPL then press 4&-&$5.
3. Use the dialing keys to modify the number, and then press 4&-&$5.
4. Use the dialing keys to modify the name, and then press 4&-&$5 to save.
5PEFMFUFBDBMMFS*%MPHFOUSZ
• When the desired caller ID log entry displays, press %&-&5&.
5PEFMFUFBMMDBMMFS*%MPHFOUSJFT
• Press .&/6 when the phone is not in use. Scroll to $BMMFS*%MPHand then
press 4&-&$5. Scroll to %FMFUFBMM and then press 4&-&$5 twice.
$BMMCMPDL
If you have subcribed to Caller ID service, you can use the call block feature to
reject certain calls automatically. The caller block list stores up to 20 entries.
Automatic call rejection can be applied to:
• numbers saved into the call block list
• incoming calls without numbers
5PBEEBDBMMCMPDLFOUSZ
1. Press .&/6 when the phone is not in use.
2. Scroll to $BMMCMPDL, and then press 4&-&$5.
3. Scroll to #MPDLMJTU, and then press 4&-&$5.
4. Scroll to "EEOFXFOUSZ, and then press 4&-&$5.
5. Enter the number.
• Use the dialing keys to enter the number (up to 30 digits).
6. Press 4&-&$5 to move to the name.
7. Use the dialing keys to enter the name (up to 15 characters). Additional key presses
show other characters of that particular key.
8. Press 4&-&$5 to save.
10
5PSFWJFXDBMMCMPDLMJTU
1. Press .&/6 when the phone is not in use.
2. Scroll to $BMMCMPDL, and then press 4&-&$5.
3. Scroll to #MPDLMJTU, and then press 4&-&$5.
4. Press 4&-&$5 to choose 3FWJFX.
5PFEJUBDBMMCMPDLFOUSZ
1. When the desired entry displays, press 4&-&$5.
2. Use the dialing keys to edit the number, and then press 4&-&$5.
3. Use the dialing keys to edit the name, and then press 4&-&$5 to save.
5PTBWFBDBMMFS*%MPHFOUSZUPDBMMCMPDLMJTU
1. When the desired caller ID log entry displays, press 4&-&$5.
2. Scroll to 5P$BMMCMPDL then press 4&-&$5.
3. Use the dialing keys to modify the number, and then press 4&-&$5.
4. Use the dialing keys to modify the name, and then press 4&-&$5 to save.
5PEFMFUFBDBMMCMPDLMJTUFOUSZ
• When the desired call block list entry displays, press %&-&5&.
5PTFUnCMPDLDBMMTXJUIPVUOVNCFSoPQUJPO
1. Press .&/6 when the phone is not in use.
2. Scroll to $BMMCMPDL, and then press 4&-&$5.
3. Scroll to $BMMTXPOVN, and then press 4&-&$5.
4. Scroll to choose /PUCMPDL or #MPDL, and then press 4&-&$5.
"CPVUBOTXFSJOHTZTUFNBOEWPJDFNBJMTFSWJDF
For message recording, your telephone has a built-in answering system, and
it also support voicemail service offered by your telephone service provider
(subscription is required, and fee may apply).
The main differences between them are as follows:
$BUFHPSZ
#VJMUJOBOTXFSJOHTZTUFN
7PJDFNBJMGSPNUFMFQIPOF
TFSWJDF
Storage
Messages are stored in the telephone base.
Messages are stored in a server
or system provided by your
telephone service.
Maximum
number of
messages
This depends on the design of telephone
base. You cannot change the maximum
number of messages that can be recorded.
This may vary with your
telephone service plan (fee
may apply). Contact your
telephone service provider for
more information.
Method
to retrieve
messages
Usually, there are two ways to retrieve messages: To retrieve messages, you
need an access number and/or
• Press a button on the telephone base; or
a secret code provided by your
• Access remotely with an access code.
service provider.
4FUZPVSCVJMUJOBOTXFSJOHTZTUFN
Your answering system has various features, read below for the basic settings.
Default settings are indicated by asterisks(*).
.FOV
%FTDSJQUJPO
0QUJPOT
"OOPVODFNFOU
Play, record, or delete an announcement for
incoming calls.
1MBZ<>%FM<>
3FD<>
%FMFUFBMMPME
Delete all old (reviewed) messages.
/"
3FDPSENFNP
Record a memo as reminders for yourself or others
using the answering system.
/"
"OTXFSPOPGG
Turn on or off the answering system.
"OTXFS0O
"OTXFS0GG
7PJDFHVJEF
Follow audio instructions to set basic features.
/"
"OTTZTTFUVQ
Change the settings of call screening, number of rings,
remote code, or message alert alone.
•
Call screening
Set whether you hear the callers while they are leaving
messages to you.
4DSFFOJOH0O
4DSFFOJOH0GG
•
# of rings
Set the number of times the telephone rings before the
answering system answers.
 5PMMTBWFS

•
Remote code
Set a two-digit security code to access the answering
system remotely from any touch-tone telephone.

•
Msg alert alone
Set to alert you when you have new messages.
5POF0GG
5POF0O
11
3FDPSEZPVSPXOBOOPVODFNFOUXJUIBIBOETFU
You can use the preset announcement to answer calls, or replace it with your own
recorded announcement. It can be up to 90 seconds in length.
1. Press .&/6 when the phone is not in use.
2. Scroll to "OTXFSJOHTZT and then press 4&-&$5 twice.
3. The handset announces, n"OOPVODFNFOU QSFTTQMBZPSQSFTTSFDPSEo
4. Press 7 to record. The handset announces, n3FDPSEBGUFSUIFUPOF1SFTT4501
XIFOZPVBSFEPOFo After the tone, speak towards the handset microphone.
Press  when done.
4FUOVNCFSPGSJOHT
You can set the answering system to answer an incoming call after 2, 3, 4, 5 or 6 rings;
or toll saver. If you choose toll saver, the answering system answers a call after 2 rings
when you have new messages, or after 4 rings when you have no new messages.
1. Press .&/6when the phone is not in use.
2. Scroll to "OTXFSJOHTZT then press 4&-&$5.
3. Scroll to "OTTZTTFUVQ then press 4&-&$5.
4. Scroll to PGSJOHT then press 4&-&$5.
or
to choose , , , ,  or 5PMMTBWFS and then press 4&-&$5.
5. Press
7PJDFHVJEFTFUVQ
This feature is an alternative way for you to do the basic setup of the answering
system. You can follow the voice guide to record your own announcement, set the
number of rings and the message alert tone.
1. Press .&/6 when the phone is not in use.
or to scroll to "OTXFSJOHTZT, and then press 4&-&$5.
2. Press
or to scroll to 7PJDFHVJEF, and then press 4&-&$5.
3. Press
4. You hear the voice promptn)FMMP5IJTWPJDFHVJEFXJMMBTTJTUZPVXJUIUIF
CBTJDTFUVQPGZPVSBOTXFSJOHTZTUFNo
5. Setup your answering system by inputting the designated numbers as
instructed in the voice guide.
6TFZPVSCVJMUJOBOTXFSJOHTZTUFN
5VSOUIFBOTXFSJOHTZTUFNPOPSPGG
The answering system must be turned on to answer and record messages.
• Press "/40/ on the telephone base to turn the built-in answering system on or off.
.FTTBHFQMBZCBDLBUUIFUFMFQIPOFCBTF
When you received a message on your answering system, you will see the
message window on the telephone base flashes. Your handset displays XX new
messages. To retrieve, press
1-":when the phone is not in use.
• It can record up to 99 messages, depending on the length of each
message. Each message can be up to three minutes in length. The total
recording time is approximately 25 minutes.
0QUJPOTEVSJOHQMBZCBDL
• Press q70- to adjust the speaker volume.
• Press 4,*1 to skip to the next message.
• Press 3&1&"5 to repeat the message currently playing. Press 3&1&"5
twice to listen to the previous message.
• Press 9%&-&5& to delete the playing message. The system advances to the
next message.
• Press
4501 to stop.
%FMFUFBMMPMENFTTBHFTBUUIFUFMFQIPOFCBTF
Press 9%&-&5& twice when the phone is not in use.
$BMMJOUFSDFQU
If you want to talk to the person whose message is being recorded, press
or on the handset.
)0.&
6TFUIFCVJMUJOBOTXFSJOHTZTUFNBOEWPJDFNBJMTFSWJDF
You can use your answering system and voicemail service together by setting your
answering system to answer before voicemail service answers as described below. To
learn how to program your voicemail settings, contact your telephone service provider.
If you are on a call, or if the answering system is busy recording a message and you
receive another call, the second caller can leave a voicemail message.
Set your answering system to answer calls at least two rings earlier than your
voicemail service is set to answer. For example, if your voicemail service answers
after six rings, set your answering system to answer after four rings. Some
voicemail service providers may program the delay before answering calls in
seconds instead of rings. In this case, allow six seconds per ring when determining
the appropriate setting.
12
3FUSJFWFWPJDFNBJMGSPNUFMFQIPOFTFSWJDF
3FUSJFWFWPJDFNBJM
When you received a voicemail, the handset displays and /FXWPJDFNBJM. To
retrieve, you typically dial an access number provided by your telephone service
provider, and then enter a security code. Contact your telephone service provider
for instructions on how to congure the voicemail settings and listen to messages.
&YQBOEZPVSUFMFQIPOFTZTUFN
"EEBOESFHJTUFSBIBOETFU
You can add new cordless handsets (%4), DECT 6.0 cordless headset,
speakerphone, or speaker box to your telephone system (purchased separately).
Your telephone system supports a maximum of ve devices.
Additional devices registered to the telephone system are assigned numbers in the
sequential order. Register each device with the telephone base before use.
When rst purchased and properly charged, each expansion handset shows
5PSFHJTUFS)4and TFFNBOVBM alternately. Charge the handset before
registering it to the telephone base.
To register a DECT 6.0 cordless headset, speakerphone, or speaker box to this
telephone system, please refer to the user’s manual of the respective product for
more details. To register a cordless handset, see below.
5PSFHJTUFSBIBOETFU
• Place the new/non-registered handset in the telephone base. The handset
shows 3FHJTUFSJOH
Do not place the
handset in the charger.
The handset shows 3FHJTUFSFE and you hear a beep when the registration process
completes. The registration process takes about 90 seconds to complete.
%FSFHJTUFSBMMEFWJDFT
To replace a handset or reassign the designated handset number of a registered
handset, you must deregister all devices and then individually register each handset.
5PEFSFHJTUFSBMMEFWJDFT
1. Press and hold '*/%)"/%4&5 on the telephone base for about 10 seconds
until the */64& light on the telephone base flashes.
2. Immediately press '*/%)"/%4&5 again.
All handsets show5PSFHJTUFS)4and TFFNBOVBM alternately when the
deregistration process completes. The deregistration process takes about
10 seconds to complete.
'SFRVFOUMZBTLFERVFTUJPOT
If you have difculty with your telephone, please try the suggestions below.
If you cannot nd the answer to your question, contact customer service by visiting our
website at XXXWUFDIQIPOFTDPN or calling   . In Canada, go to XXX
WUFDIDBOBEBDPN or call   .
*DBOOPUBEEBOEDPOOFDUNZDFMMQIPOFPSIFBETFUUPUIFUFMFQIPOFCBTF
• Make sure you have cellular coverage and the Bluetooth function of your cell phone or headset
is turned on. See the user’s manual of your cell phone or headset for more information.
• Make sure that the telephone base is in discoverable mode.
• Carefully follow the pairing instructions on page 6-7. Make sure that your Bluetooth cell
phone or headset is not connected to any other Bluetooth device, and is connected to the
telephone base and active on the device list.
• Remove 75FDI%4 from your cell phone’s handsfree device history list (see the user’s
manual of your cell phone for more information).
• Turn off your cell phone or headset, and then turn it on again.
• For some cell phones, you must authorize 75FDI%4 device in your cell phone’s Bluetooth
feature. See the user’s manual of your cell phone for more information.
• Most cell phones have the Bluetooth feature in the connection or setup menus. Please refer
to the user’s manual of your cell phone.In general, press the menu key on your cell phone,
and then look for the Bluetooth menu in the settings or connection menu. In the Bluetooth
menu, select the option to search for or add new devices.
• Reset the telephone base. Unplug the unit’s electrical power. Wait for approximately 15
seconds, and then plug it back in. Repeat the above suggestions
5IF1*/POUIFUFMFQIPOFCBTFEPFTOPUXPSL
• Make sure you enter the correct PIN. The default PIN is .
$BOUIF%4IFMQUIFQPPSDFMMQIPOFSFDFQUJPOJONZIPVTF
• If your cell phone has poor reception in your home, the %4 cannot improve the
reception. However, if there is a location in your house with better reception, you can leave
your cell phone at that location while you use the %4 cell line. In order for this to work,
the telephone base must be within 30 feet of the cell phone.
13
.ZUFMFQIPOFEPFTOPUXPSLBUBMM
• Make sure the battery is installed and charged correctly. For optimum daily performance,
return the handset to the telephone base or charger after use.
• Make sure the power adapter is securely plugged into an outlet not controlled by a wall switch.
• Make sure the telephone line cord is plugged firmly into the telephone base and the wall jack.
• Unplug the electrical power to the telephone base. Wait for approximately
15 seconds, and then plug it back in. Allow up to one minute for the cordless handset and
telephone base to synchronize.
• Charge the battery in the handset for up to 12 hours.
• If the battery is completely depleted, charge the handset for at least 30 minutes before use.
• Remove the battery and then install it again. If that still does not work, it may be necessary
to purchase a new battery.
• Disconnect the telephone base from the telephone wall jack and plug in a working telephone.
If the other telephone does not work, the problem is probably in the wiring or telephone
service. Contact your telephone service provider.
• Make sure there is a dial tone before dialing. It is normal if the handset takes a second or
two to synchronize with the telephone base before producing a dial tone. Wait an extra
second before dialing.
• Eliminate any background noise. Mute the cordless handset before dialing, or dial from
another room in your home with less background noise.
• If you have changed your telephone service to digital service from a cable company or a VoIP
service provider, the telephone line may need to be rewired to allow all existing telephone jacks
to work. Contact your service provider for more information.
5IFBOTXFSJOHTZTUFNEPFTOPUBOTXFSBGUFSDPSSFDUOVNCFSPGSJOHTPSEPFTOPU
SFDPSENFTTBHFT
• Make sure the answering system is on. When the answering system is on, the handset shows
"/40/ and the "/40/ light on the telephone base is on.
• If toll saver is selected, the number of rings changes to two when there are new messages.
• If the memory is full or the answering system is off, the answering system answers after 10
rings. In some cases, the answering system is affected by the ringing system used by the
telephone service provider.
• Make sure the memory of the answering system is not full. When the answering machine
memory is full, it does not record new messages until some old messages are deleted.
• If you subscribe to voicemail service, change the number of rings so that your answering
system answers before your voicemail answers. To determine how many rings activate your
voicemail, contact your telephone service provider.
• If there is a fax machine connected to the same telephone line, try disconnecting the fax
machine. If that solves the problem, consult your fax machine documentation for information
on compatibility with answering systems.
5IFNFTTBHFTPOUIFBOTXFSJOHTZTUFNBSFJODPNQMFUF
• If a caller leaves a very long message, part of it may be lost when the answering system
disconnects the call after the preset recording time.
• If the memory on the answering system becomes full during a message, the answering
system stops recording and disconnects the call.
• If the caller’s voice is very soft, the answering system may stop recording and disconnect the call.
*BDDJEFOUBMMZDIBOHFEUIF-$%MBOHVBHFUP'SFODIPS4QBOJTI BOE*EPOmULOPXIPX
UPDIBOHFJUCBDLUP&OHMJTI
• While the phone is not in use, press .&/6, and then enter
 to reset the LCD
language to English.
• While the phone is on a call, press .&/6, and then enter
 to reset the LCD
language to English. Then the call ends.
$PNNPODVSFGPSFMFDUSPOJDFRVJQNFOU
• If the telephone is not responding normally, put the cordless handset in the telephone base. If
this does not x the problem, do the following (in the order listed):
1. Disconnect the power to the telephone base.
2. Disconnect the battery on the cordless handset.
3. Wait a few minutes before connecting power to the telephone base.
4. Install the battery again and place the cordless handset in the telephone base .
5. Wait for the cordless handset to synchronize with the telephone base. Allow up one
minute for this to take place.
&$0NPEF
This power conserving technology reduces power consumption for optimal battery performance.
The ECO mode activates automatically whenever the handset is synchronized with the
telephone base.
The handset shows &$0 when the ECO mode activates.
&OFSHZTBWJOHDIBSHJOHNPEF
When this mode is activated, all telephone functions, except handset battery charging, will be disabled.
5PBDUJWBUFUIFFOFSHZTBWJOHDIBSHJOHNPEF
1. Unplug the telephone base power adapter from the power outlet. Make sure all handsets are
plugged with charged batteries before proceeding.
2. While you press and hold '*/%)"/%4&5, plug the telephone base power adapter back to the
power outlet.
3. After about 20 seconds, when the */64& light starts flashing, release '*/%)"/%4&5
and then press it again within 2 seconds.
When the phone successfully enters the energy-saving charging mode, the */64& light turns
off and all handsets display 5PSFHJTUFS)4andTFFNBOVBMalternately.
When the phone fails to enter this mode, repeat Step 1 through Step 3 above. The telephone base will
be powered up as normal if you fail to press '*/%)"/%4&5 within 2 seconds in Step 3.
5PEFBDUJWBUFUIFFOFSHZTBWJOHDIBSHJOHNPEF
1. Unplug the telephone base power adapter from the power outlet, and then plug it back in.
Then the telephone base is powered up as normal.
2. Register your handsets back to the telephone base. See page 13 for handset registration instructions.
14
(FOFSBMQSPEVDUDBSF
Remember that electrical appliances can cause serious injury if used when you are wet
or standing in water. If the telephone base should fall into water, DO NOT RETRIEVE IT
UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORD FROM THE
WALL. Then remove the telephone by the unplugged cords.
5BLJOHDBSFPGZPVSUFMFQIPOF
Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.
"WPJESPVHIUSFBUNFOU
Place the handset down gently. Save the original packing materials to protect your telephone if you
ever need to ship it.
"WPJEXBUFS
Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it
with wet hands. Do not install the telephone base near a sink, bathtub or shower.
&MFDUSJDBMTUPSNT
Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own
safety, take caution when using electrical appliances during storms.
$MFBOJOHZPVSUFMFQIPOF
Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft
cloth slightly dampened with water or mild soap. Do not use excess water or cleaning solvents of any kind.
5IF3#3$†TFBM
The RBRCÂŽ seal on the nickel-metal hydride battery indicates that VTech Communications,
Inc. is voluntarily participating in an industry program to collect and recycle these batteries at
the end of their useful lives, when taken out of service within the United States and Canada.
The RBRCÂŽ program provides a convenient alternative to placing used nickel-metal hydride
batteries into the trash or municipal waste, which may be illegal in your area.
VTech’s participation in RBRC® makes it easy for you to drop off the spent battery at local
retailers participating in the RBRCÂŽ program or at authorized VTech product service centers.
Please call   #"55&3:TM for information on Ni-MH battery recycling and disposal
bans/restrictions in your area.
VTech’s involvement in this program is part of its commitment to protecting our environment
and conserving natural resources.
3#3$†JTBSFHJTUFSFEUSBEFNBSLPG3FDIBSHFBCMF#BUUFSZ3FDZDMJOH$PSQPSBUJPO
-JNJUFEXBSSBOUZ
8IBUEPFTUIJTMJNJUFEXBSSBOUZDPWFS
The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or
“you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects in
material and workmanship, pursuant to the following terms and conditions, when installed and used normally
and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer
for Products purchased and used in the United States of America and Canada.
8IBUXJMM75FDIEPJGUIF1SPEVDUJTOPUGSFFGSPNEFGFDUTJONBUFSJBMTBOEXPSLNBOTIJQEVSJOHUIF
MJNJUFEXBSSBOUZQFSJPE n.BUFSJBMMZ%FGFDUJWF1SPEVDUo
During the limited warranty period, VTech’s authorized service representative will repair or replace at VTech’s
option, without charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished
replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of
the same or similar design. We will retain defective parts, modules, or equipment. Repair or replacement of the
Product, at VTech’s option, is your exclusive remedy. VTech will return the repaired or replacement Products to
you in working condition. You should expect the repair or replacement to take approximately 30 days.
)PXMPOHJTUIFMJNJUFEXBSSBOUZQFSJPE
The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs
or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies
to the repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement
Product is shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer.
8IBUJTOPUDPWFSFECZUIJTMJNJUFEXBSSBOUZ
This limited warranty does not cover:
1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper
installation, abnormal operation or handling, neglect, inundation, re, water or other liquid intrusion; or
2. Product that has been damaged due to repair, alteration or modication by anyone other than an
authorized service representative of VTech; or
3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or
cable or antenna systems; or
4. Product to the extent that the problem is caused by use with non-VTech accessories; or
5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have
been removed, altered or rendered illegible; or
6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or
Canada, or used for commercial or institutional purposes (including but not limited to Products used for
rental purposes); or
7. Product returned without a valid proof of purchase (see item 2 below); or
8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems
outside the unit.
)PXEPZPVHFUXBSSBOUZTFSWJDF
To obtain warranty service in the USA, please visit our website at XXXWUFDIQIPOFTDPN or call
  . In Canada, go to XXXWUFDIDBOBEBDPN or DBMM  .
/05&: Before calling for service, please review the user’s manual - a check of the Product’s controls and
features may save you a service call.
Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and
are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location.
VTech will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling
charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not
covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will
notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for
the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty.
8IBUNVTUZPVSFUVSOXJUIUIF1SPEVDUUPHFUXBSSBOUZTFSWJDF
1. Return the entire original package and contents including the Product to the VTech service location along
with a description of the malfunction or difculty; and
2. Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and
the date of purchase or receipt; and
3. Provide your name, complete and correct mailing address, and telephone number.
0UIFSMJNJUBUJPOT
This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written
or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty
exclusively describes all of VTech’s responsibilities regarding the Product. There are no other express warranties.
No one is authorized to make modications to this limited warranty and you should not rely on any such modication.
State/Provincial Law Rights: This warranty gives you specic legal rights, and you may also have other rights, which vary
from state to state or province to province.
Limitations: Implied warranties, including those of tness for a particular purpose and merchantability (an unwritten
warranty that the Product is t for ordinary use) are limited to one year from the date of purchase. Some states/provinces
do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event
shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited
to lost prots or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment,
15
and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
1MFBTFSFUBJOZPVSPSJHJOBMTBMFTSFDFJQUBTQSPPGPGQVSDIBTF
'$$ "$5"BOE*$SFHVMBUJPOT
'$$1BSU
This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15
of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modications to this equipment not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Privacy of communications may not be ensured
when using this telephone.
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can
be safely absorbed by a user or bystander according to the intended usage of the product. This product has
been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the
user. The telephone base shall be installed and used such that parts of the user’s body other than the hands
are maintained at a distance of approximately 20 cm (8 inches) or more.
This Class B digital apparatus complies with Canadian requirement:
CAN ICES-3 (B)/NMB-3(B)
'$$1BSUBOE"$5"
This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council
for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product
identier in the format US:AAAEQ##TXXXX. This identier must be provided to your telephone service provider upon request.
The plug and jack used to connect this equipment to premises wiring and the telephone network must comply
with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also
compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See
the installation instructions in the user’s manual.
The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone
line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters
following the US: in the product identier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all
RENs should be ve (5.0) or less. For more information, please contact your telephone service provider.
This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected
to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have
questions about what will disable alarm equipment, consult your telephone service provider or a qualied installer.
If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected.
Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair
procedures, follow the instructions outlined under the Limited warranty.
If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue
your telephone service. The telephone service provider is required to notify you before interrupting service. If advance
notice is not practical, you will be notied as soon as possible. You will be given the opportunity to correct the problem
and the telephone service provider is required to inform you of your right to le a complaint with the FCC. Your telephone
service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper
functioning of this product. The telephone service provider is required to notify you if such changes are planned.
If this product is equipped with a corded or cordless handset, it is hearing aid compatible.
If this product has memory dialing locations, you may choose to store emergency telephone numbers
(e.g., police, re, medical) in these locations. If you do store or test emergency numbers, please:
Remain on the line and briefly explain the reason for the call before hanging up.
Perform such activities in off-peak hours, such as early morning or late evening.
*OEVTUSZ$BOBEB
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference, including interference that may cause undesired operation.
The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada technical
specications were met.
The Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The REN is an indication of
the maximum number of devices allowed to be connected to a telephone interface. The termination on an
interface may consist of any combination of devices subject only to the requirement that the sum of the RENs
of all the devices does not exceed ve.
This product meets the applicable Industry Canada technical specications.
5FDIOJDBMTQFDJGJDBUJPOT
Transmit frequency
DECT frequency: 1921.536-1928.448 MHz
Bluetooth frequency: 2402.000-2480.000 MHz
Channels
DECT: 5
Bluetooth: 79
Nominal effective range
Maximum power allowed by FCC and IC. Actual operating range
may vary according to environment conditions at the time of use.
Power requirements
Handset: 2.4V Ni-MH battery
Telephone base: 6V DC @ 400mA
Charger: 6V AC @ 300mA
Memory
Phonebook:
1000 memory locations (shared between home and cell lines); up
to 30 digits and 15 characters
Caller ID log:
50 memory locations; up to 24 digits and 15 characters
The#MVFUPPUI †word mark and logos are owned by Bluetooth SIG, Inc. and any use of such
marks by VTech Holdings Limited is under license. VTech Holdings Limited is a member of
Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.
Specications are subject to change without notice.
Š 2014 for VTECH TELECOMMUNICATIONS LTD.
All rights reserved. 01/14. DS6621_ACIB_V2.0
Document order number: 91-007312-020-100
16

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : stanleyl
Create Date                     : 2014:03:06 20:34:24+08:00
Modify Date                     : 2014:03:06 20:34:24+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Instance ID                     : uuid:541a4291-6d4b-4f28-b478-e52046ceb502
Document ID                     : adobe:docid:indd:0a6ff7fb-87ff-11e3-b3d2-906d5bc9e138
Rendition Class                 : proof:pdf
Derived From Instance ID        : 6b843ee6-87f7-11e3-b3d2-906d5bc9e138
Derived From Document ID        : adobe:docid:indd:e4a85152-849a-11e3-85cb-99ab8cdf8b05
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : xmp.iid:F1F80EA4BDAFE1118DD7FDD55A4446BF, xmp.iid:F2F80EA4BDAFE1118DD7FDD55A4446BF, xmp.iid:F96315DE0287E311BAEC8A0D2652A976, xmp.iid:FB6315DE0287E311BAEC8A0D2652A976, uuid:25DD00AC7E37E211BDE2B3F6A1248803, uuid:448CCFCC03D5DF11B8D6A5074923482E, uuid:FEBDE12F8325E311A30E9125C166D6C9, uuid:DA6BA11D7238E211B4A0FFD85335B016, uuid:50FC39E4B432E21192E1DD32CABCD8A6, uuid:F676513A4241E311B51AA7214490B7A8, uuid:337D071524DAE111A3BFCF17999725CF, uuid:CBAE10C5B125E311A30E9125C166D6C9, uuid:CE1557737C26E311A30E9125C166D6C9, uuid:CD1557737C26E311A30E9125C166D6C9, uuid:0D95190032D7DF1199279CC253C67547, uuid:0D95190032D7DF1199279CC253C67547, uuid:F9BDE12F8325E311A30E9125C166D6C9, uuid:F9BDE12F8325E311A30E9125C166D6C9, uuid:0FC83C6FB9E8E011B555E86043D9325F, uuid:F9BDE12F8325E311A30E9125C166D6C9, uuid:0D95190032D7DF1199279CC253C67547, uuid:0D95190032D7DF1199279CC253C67547, xmp.iid:A6E13D78D879E31189DEFAFE62EF6AC8, xmp.iid:6D77BD24F07BE31197159B5FDD10D31E, xmp.iid:6E77BD24F07BE31197159B5FDD10D31E, xmp.iid:6F77BD24F07BE31197159B5FDD10D31E, uuid:FEBDE12F8325E311A30E9125C166D6C9, uuid:9D5A0DD5A0C7DF11BDF2A491C6E90415, uuid:767CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:787CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:9C5A0DD5A0C7DF11BDF2A491C6E90415, uuid:FEBDE12F8325E311A30E9125C166D6C9, uuid:CCCC24E1900EE111A397CCD826D999C0, uuid:CE0967716097DE11B5439EF0BA26173E, uuid:CE0967716097DE11B5439EF0BA26173E, uuid:F676513A4241E311B51AA7214490B7A8, uuid:FE2A02BDB520E1118BF0FE4F227C93A8, uuid:CD1557737C26E311A30E9125C166D6C9, uuid:9C5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9D5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9C5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9D5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9C5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9D5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9C5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9D5A0DD5A0C7DF11BDF2A491C6E90415, uuid:FEBDE12F8325E311A30E9125C166D6C9, uuid:0D95190032D7DF1199279CC253C67547, uuid:0D95190032D7DF1199279CC253C67547, uuid:0D95190032D7DF1199279CC253C67547, uuid:9C5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9D5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9C5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9D5A0DD5A0C7DF11BDF2A491C6E90415, uuid:787CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:787CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:787CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:9C5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9D5A0DD5A0C7DF11BDF2A491C6E90415, uuid:767CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:0D95190032D7DF1199279CC253C67547, uuid:0D95190032D7DF1199279CC253C67547, uuid:0D95190032D7DF1199279CC253C67547, uuid:787CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:9C5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9D5A0DD5A0C7DF11BDF2A491C6E90415, uuid:787CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:787CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:9C5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9D5A0DD5A0C7DF11BDF2A491C6E90415, uuid:787CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:9C5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9D5A0DD5A0C7DF11BDF2A491C6E90415, uuid:787CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:9C5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9D5A0DD5A0C7DF11BDF2A491C6E90415, uuid:787CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:0D95190032D7DF1199279CC253C67547, uuid:9C5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9D5A0DD5A0C7DF11BDF2A491C6E90415, uuid:767CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:AD89F9F28859DE119B41FBCF74F283C5, uuid:CCCC24E1900EE111A397CCD826D999C0, uuid:787CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:CCCC24E1900EE111A397CCD826D999C0, uuid:787CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:9C5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9D5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9C5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9D5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9C5A0DD5A0C7DF11BDF2A491C6E90415, uuid:9D5A0DD5A0C7DF11BDF2A491C6E90415, uuid:CE0967716097DE11B5439EF0BA26173E, uuid:787CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:0D95190032D7DF1199279CC253C67547, uuid:CD1557737C26E311A30E9125C166D6C9, uuid:DA6BA11D7238E211B4A0FFD85335B016, uuid:CD1557737C26E311A30E9125C166D6C9, uuid:CE0967716097DE11B5439EF0BA26173E, uuid:767CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:CCCC24E1900EE111A397CCD826D999C0, uuid:767CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:CCCC24E1900EE111A397CCD826D999C0, uuid:0D95190032D7DF1199279CC253C67547, xmp.iid:5DCB1C7C3F62E3119840E311387300E2
Manifest Reference Document ID  : xmp.did:F1F80EA4BDAFE1118DD7FDD55A4446BF, xmp.did:F2F80EA4BDAFE1118DD7FDD55A4446BF, xmp.did:7ABF775B622068118083C2F4188BF412, xmp.did:029956368520681180838AC41B7724A7, uuid:24DD00AC7E37E211BDE2B3F6A1248803, uuid:9236EA16AD75DE11813DFB5204A0EDB1, uuid:FDBDE12F8325E311A30E9125C166D6C9, uuid:D96BA11D7238E211B4A0FFD85335B016, uuid:4FFC39E4B432E21192E1DD32CABCD8A6, uuid:FBBDE12F8325E311A30E9125C166D6C9, uuid:327D071524DAE111A3BFCF17999725CF, uuid:CAAE10C5B125E311A30E9125C166D6C9, uuid:D56BA11D7238E211B4A0FFD85335B016, uuid:FFBDE12F8325E311A30E9125C166D6C9, uuid:0C95190032D7DF1199279CC253C67547, uuid:0C95190032D7DF1199279CC253C67547, uuid:F8BDE12F8325E311A30E9125C166D6C9, uuid:F8BDE12F8325E311A30E9125C166D6C9, uuid:0CC83C6FB9E8E011B555E86043D9325F, uuid:F8BDE12F8325E311A30E9125C166D6C9, uuid:0C95190032D7DF1199279CC253C67547, uuid:0C95190032D7DF1199279CC253C67547, xmp.did:A6E13D78D879E31189DEFAFE62EF6AC8, xmp.did:6D77BD24F07BE31197159B5FDD10D31E, xmp.did:6E77BD24F07BE31197159B5FDD10D31E, xmp.did:6F77BD24F07BE31197159B5FDD10D31E, uuid:FDBDE12F8325E311A30E9125C166D6C9, uuid:985A0DD5A0C7DF11BDF2A491C6E90415, uuid:757CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:777CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:9A5A0DD5A0C7DF11BDF2A491C6E90415, uuid:FDBDE12F8325E311A30E9125C166D6C9, uuid:CBCC24E1900EE111A397CCD826D999C0, uuid:CD0967716097DE11B5439EF0BA26173E, uuid:CD0967716097DE11B5439EF0BA26173E, uuid:FBBDE12F8325E311A30E9125C166D6C9, uuid:FD2A02BDB520E1118BF0FE4F227C93A8, uuid:FFBDE12F8325E311A30E9125C166D6C9, uuid:9A5A0DD5A0C7DF11BDF2A491C6E90415, uuid:985A0DD5A0C7DF11BDF2A491C6E90415, uuid:9A5A0DD5A0C7DF11BDF2A491C6E90415, uuid:985A0DD5A0C7DF11BDF2A491C6E90415, uuid:9A5A0DD5A0C7DF11BDF2A491C6E90415, uuid:985A0DD5A0C7DF11BDF2A491C6E90415, uuid:9A5A0DD5A0C7DF11BDF2A491C6E90415, uuid:985A0DD5A0C7DF11BDF2A491C6E90415, uuid:FDBDE12F8325E311A30E9125C166D6C9, uuid:0C95190032D7DF1199279CC253C67547, uuid:0C95190032D7DF1199279CC253C67547, uuid:0C95190032D7DF1199279CC253C67547, uuid:9A5A0DD5A0C7DF11BDF2A491C6E90415, uuid:985A0DD5A0C7DF11BDF2A491C6E90415, uuid:9A5A0DD5A0C7DF11BDF2A491C6E90415, uuid:985A0DD5A0C7DF11BDF2A491C6E90415, uuid:777CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:777CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:777CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:9A5A0DD5A0C7DF11BDF2A491C6E90415, uuid:985A0DD5A0C7DF11BDF2A491C6E90415, uuid:757CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:0C95190032D7DF1199279CC253C67547, uuid:0C95190032D7DF1199279CC253C67547, uuid:0C95190032D7DF1199279CC253C67547, uuid:777CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:9A5A0DD5A0C7DF11BDF2A491C6E90415, uuid:985A0DD5A0C7DF11BDF2A491C6E90415, uuid:777CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:777CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:9A5A0DD5A0C7DF11BDF2A491C6E90415, uuid:985A0DD5A0C7DF11BDF2A491C6E90415, uuid:777CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:9A5A0DD5A0C7DF11BDF2A491C6E90415, uuid:985A0DD5A0C7DF11BDF2A491C6E90415, uuid:777CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:9A5A0DD5A0C7DF11BDF2A491C6E90415, uuid:985A0DD5A0C7DF11BDF2A491C6E90415, uuid:777CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:0C95190032D7DF1199279CC253C67547, uuid:9A5A0DD5A0C7DF11BDF2A491C6E90415, uuid:985A0DD5A0C7DF11BDF2A491C6E90415, uuid:757CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:AB89F9F28859DE119B41FBCF74F283C5, uuid:CBCC24E1900EE111A397CCD826D999C0, uuid:777CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:CBCC24E1900EE111A397CCD826D999C0, uuid:777CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:9A5A0DD5A0C7DF11BDF2A491C6E90415, uuid:985A0DD5A0C7DF11BDF2A491C6E90415, uuid:9A5A0DD5A0C7DF11BDF2A491C6E90415, uuid:985A0DD5A0C7DF11BDF2A491C6E90415, uuid:9A5A0DD5A0C7DF11BDF2A491C6E90415, uuid:985A0DD5A0C7DF11BDF2A491C6E90415, uuid:CD0967716097DE11B5439EF0BA26173E, uuid:777CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:0C95190032D7DF1199279CC253C67547, uuid:FFBDE12F8325E311A30E9125C166D6C9, uuid:D96BA11D7238E211B4A0FFD85335B016, uuid:FFBDE12F8325E311A30E9125C166D6C9, uuid:CD0967716097DE11B5439EF0BA26173E, uuid:757CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:CBCC24E1900EE111A397CCD826D999C0, uuid:757CCD2ADBC6DF11B48B8FACDC1F1C08, uuid:CBCC24E1900EE111A397CCD826D999C0, uuid:0C95190032D7DF1199279CC253C67547, uuid:923f7c28-53be-11d9-ba81-000a95d81712, xmp.did:5DCB1C7C3F62E3119840E311387300E2
Metadata Date                   : 2014:02:11 10:14:58+08:00
Creator Tool                    : Adobe InDesign CS2 (4.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 6776 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : DS6621-X_ACIB_V2_APPRVOAL_20140211.pdf
Creator                         : stanleyl
Producer                        : Acrobat Distiller 10.0.0 (Windows)
Trapped                         : False
Page Count                      : 16
EXIF Metadata provided by EXIF.tools
FCC ID Filing: EW780-9423-00

Navigation menu