VTech Telecommunications 80-9479-00 IP Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2533459
Application ID	d/MElR1bdHS0TABVCxS/eA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	232.68kB (2908463 bits)
Date Submitted	2015-02-12 00:00:00
Date Available	2015-02-12 00:00:00
Creation Date	2014-07-10 14:55:54
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2014-07-10 14:55:58
Document Title	User Manual
Document Creator	Adobe InDesign CS2 (4.0)

Congratulations
VC931
Go to www.vtechphones.com
to register your product for
enhanced warranty support and
latest VTech product news.
2.4GHz Pan and Tilt
IP Wi-Fi Camera
on purchasing your new VTech product. Before
using this telephone, please read Important
safety instructions.
For support, shopping, and everything new at
VTech, visit our website at
www.vtechphones.com.
9 – MicroSD card slot
10 – Volume –
• Press to decrease the listening volume.
Volume +
• Press to increase the listening volume.
11 – LED indicators
Overview
Connect
You can choose to connect the camera unit for
desktop usage, wall mounting or ceiling mounting.
TIP
For desktop usage, wall mounting and/or ceiling
mounting the camera unit, you can refer to the
Installation guide.
•
Your camera package contains the following
items. Save your sales receipt and original
packaging in the event warranty service is
necessary.
•
mic
•
•
Add IP Camera to your mobile app
Login
1. After you have downloaded “vtech connect“,
create an account and then login.
Use only the camera power adapter supplied with
this product.
Make sure the electrical outlets are not controlled by
wall switches.
The power adapter is intended to be correctly oriented
in a vertical or floor mount position. The prongs are not
designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
Make sure the camera unit and the power adapter
cord are out of reach of children.
Make sure you have setup an IEEE 802.11n
router (not included).
12 – Reset button
You can then choose to connect the camera unit
with cable connection or Wi-Fi connection.
1. For cable connection, connect the camera unit
and the router with a network cable.
For Wi-Fi connection, skip to step 2. Do not
plug in the network cable.
mic
When the camera announces “Ready to monitor“,
you can add the camera to your mobile app.
2. Tab Continue.
volume
volum
User’s manual
3. Tab Search for camera to add the camera
unit.
If you use Wi-Fi connection, check the Wi-Fi
coverage of your router. Place the camera unit at a
desired place.
To maintain compliance with the FCC’s RF exposure
guidelines, place the IP carmera at least 20cm from
nearby persons.
Add camera
Connect the IP Camera
1 – Infrared LED
• Backup light for night vision.
2 – Camera lens
3 – Microphone
4 – Antenna
• Connect to router with Wi-Fi.
mic
NOTES
•
•
NOTES
What’s in the box
2. Connect the power adapter to the camera unit
and a power supply not controlled by a wall
switch.
4. If you are using Wi-Fi for connection, select the
Wi-Fi network and tab Continue.
User’s
manual
5 – Speaker
6 – Power jack
7 – RJ45 jack
• Connection to router with a network cable.
8 – 3.5mm line jack
• Connect to audio output device.
Installation
guide
Using the IP camera
Camera operations
Camera live view
Take photo or record video
Play melody
Touch , ,  or  to move the camera upward,
downward, leftward or rightward; or touch and
hold to pan or tilt the camera.
1. Touch to take a snapshot of the current view.
Touch  to play a melody from the camera
speaker. There are five melodies available.
5. When you have successfully added the
camera unit, tab View Live Camera to start
viewing.
1 – Camera live view
• Touch to switch to camera live view mode.
2 – Touch to talk
• Touch to switch to talk mode.
3 – Take photo or record video
• Touch to switch to snapshot/video mode.
4 – Play melody
• Touch to select a melody.
TIP
If connection fails, press the Reset button on the bottom
of the camera unit for five seconds to reboot the camera,
and then add the camera again.
Touch to talk
Touch to talk through the camera speaker.
2. Touch the video icon on the right below the live
view to switch to record video mode.
3. Touch to record a video of the current view.
4. Touch the camera icon will switch back to take
photo mode.
General product care
To keep this product working well and looking
good, follow these guidelines:
• Avoid putting it near heating appliances and
devices that generate electrical noise (for
example, motors or fluorescent lamps).
• DO NOT expose it to direct sunlight or
moisture.
• Avoid dropping the product or treating it
roughly.
• Clean with a soft cloth.
• DO NOT immerse the camera unit in water
and do not clean it under the tap.
• DO NOT use cleaning spray or liquid cleaners.
• Make sure the camera unit is dry before you
connect it to the mains again.
Storage
When you are not going to use the IP camera for
some time, store the camera unit and the adapter
in a cool and dry place.
CONSERVEZ CES INSTRUCTIONS
Important safety instructions
When using your equipment, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and injury, including
the following:
1. Follow all warnings and instructions marked on
the product.
2. Adult setup is required.
3. This home monitor is intended as an aid. It is
not a substitute for home security supervision
and should not be used as such.
4. This product is not intended for use as a
medical monitor.
5. Do not use this product near water. For
example, do not use it next to a bath tub, wash
bowl, kitchen sink, laundry tub or swimming
pool, or in a wet basement or shower.
6. Use only the adapters included with this
product. Incorrect adapter polarity or voltage
can seriously damage the product.
Power adapter: Input 100-240V AC 400mA
50/60Hz; Output: 5V DC 2000mA
7. The power adapter is intended to be correctly
oriented in a vertical or floor mount position.
The prongs are not designed to hold the plug
in place if it is plugged into a ceiling, under-thetable or cabinet outlet.
8. Unplug this product from the wall outlet before
cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
9. Unplug the power cords before replacing
batteries.
10.Do not cut off the power adapters to replace
them with other plugs, as this causes a
hazardous situation.
11.Do not allow anything to rest on the power
cords. Do not install this product where the
cords may be walked on or crimped.
12.This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply in your home, consult your dealer or
local power company.
13.Do not overload wall outlets or use an
extension cord.
14.Do not place this product on an unstable table,
shelf, stand or other unstable surfaces.
15.This product should not be placed in any area
where proper ventilation is not provided. Slots
and openings in the back or bottom of this
product are provided for ventilation. To protect
them from overheating, these openings must
not be blocked by placing the product on a
soft surface such as a bed, sofa or rug. This
product should never be placed near or over a
radiator or heat register.
16.Never push objects of any kind into this
product through the slots because they may
touch dangerous voltage points or create a
short circuit. Never spill liquid of any kind on
the product.
17.To reduce the risk of electric shock, do
not disassemble this product, but take it to
an authorized service facility. Opening or
removing parts of the product other than
specified access doors may expose you to
dangerous voltages or other risks. Incorrect
reassembling can cause electric shock when
the product is subsequently used.
18.You should test the sound reception every
time you turn on the units or move one of the
components.
19.Periodically examine all components
for damage.
20.Be aware of possible loss of privacy while
using public airwaves. Conversations may be
picked up by other nursery monitors, cordless
phones, scanners, etc.
21.Children should be supervised to ensure that
they do not play with the product.
22.The small parts of this monitor can be
swallowed by babies or small children. Keep
these parts out of reach of children.
23.The product is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
SAVE THESE INSTRUCTIONS
Cautions
• Use and store the product at a temperature
between 32oF and 104oF.
• Do not expose the product to extreme cold,
heat or direct sunlight. Do not put the product
close to a heating source.
• Other electronic products may cause
interference with your IP camera. Try installing
your IP camera as far away from these
electronic devices as possible: wireless
routers, radios, cellular telephones, intercoms,
room monitors, televisions, personal
computers, kitchen appliances and cordless
telephones.
Precautions for users of implanted cardiac
pacemakers
Cardiac pacemakers (applies only to digital
cordless devices):
Wireless Technology Research, LLC (WTR),
an independent research entity, led a
multidisciplinary evaluation of the interference
between portable wireless devices and implanted
cardiac pacemakers. Supported by the U.S. Food
and Drug Administration, WTR recommends to
physicians that:
Pacemaker patients
• Should keep wireless devices at least six
inches from the pacemaker.
• Should NOT place wireless devices directly
over the pacemaker, such as in a breast
pocket, when it is turned ON.
WTR’s evaluation did not identify any risk to
bystanders with pacemakers from other persons
using wireless devices.
Electromagnetic fields (EMF)
This VTech product complies with all standards
regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this
user’s manual, the product is safe to be used
based on scientific evidence available today.
FCC and IC regulations
FCC Part 15
This equipment has been tested and found to comply
with the requirements for a Class B digital device
under Part 15 of the Federal Communications
Commission (FCC) rules. These requirements are
intended to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications to this equipment not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
To ensure safety of users, the FCC has established
criteria for the amount of radio frequency energy
that can be safely absorbed by a user or bystander
according to the intended usage of the product. This
product has been tested and found to comply with
the FCC criteria. The camera unit shall be installed
and used such that parts of all persons’ body are
maintained at a distance of approximately
8 in (20 cm) or more.
This Class B digital apparatus complies with
Canadian requirement:
CAN ICES-3 (B)/NMB-3(B)
number only signifies that the Industry Canada
technical specifications were met.
This product meets the applicable Industry Canada
technical specifications.
RF radiation exposure statement
The camera unit complies with FCC RF radiation
exposure limits set forth for an uncontrolled
environment. The camera unit should be installed
and operated with a minimum distance of 8 in (20
cm) between the main unit and all persons’ body.
Use of other accessories may not ensure compliance
with FCC RF exposure guidelines. This transmitter
must not be co-located or operating in conjunction
with any other antenna or transmitter. This equipment
complies also with Industry Canada RSS-210 with
respect to Canada’s Health Code 6 for Exposure of
Humans to RF Fields.
For cETL compliance only
vous possédez à votre domicile, consultez votre
marchand ou votre compagnie locale d’électricité.
Mesures de sécurité importantes
13. Ne surchargez pas les prises de courant murales
ni les rallonges électriques.
Lorsque vous utilisez votre appareil, vous devriez
toujours suivre certaines mesures de précaution
de base afin de réduire les risques d’incendie,
d’électrocution et de blessures corporelles, dont ceux
qui suivent:
1. Observez toutes les instructions et mises en
garde inscrites sur l’appareil.
2. L’installation par un adulte est requise.
3. Ce moniteur résidentiel est conçu à titre d’aide
seulement. Il ne remplace pas les systèmes de
surveillance résidentiels et ne doit pas être utilisé
comme tel.
4. Ce produit n’est pas conçu pour être utilisé en
tant que moniteur médical.
5. N’utilisez pas cet appareil près de l’eau ni de toute
autre source d’humidité, par exemple, près d’une
baignoire, cuve à lessive, évier de cuisine, dans
un sous-sol humide ni près d’une piscine, dans un
soussol humide ou une douche.
6. N’utilisez que les adaptateurs inclus avec ce
produit. L’utilisation d’un adaptateur dont la
polarité ou la tension serait inadéquate risque
d’endommager sérieusement le produit et mettre
votre sécurité en péril.
Adaptateur secteur de la caméra : Entrée 100240V CA 400 mA 50/60 Hz;
Sortie : 5 V CC 2000 mA.
7. Lorsqu’ils sont branchés dans une prise de
courant, les adaptateurs secteur ont été conçus
pour être orientés correctement, soit à la
verticale ou au plancher. Les broches n’ont pas
été conçues pour supporter le poids du bloc
d’alimentation et le maintenir en place si celuici
est branché dans une prise au plafond, sous une
table ou dans un meuble.
8. Débranchez ce produit de la prise de courant
avant de procéder au nettoyage. N’utilisez pas de
nettoyants en aérosols. Utilisez un chiffon humide
pour le nettoyer.
9. Débranchez les cordons d’alimentation avant de
remplacer le bloc-piles.
Industry Canada
10. Ne coupez pas les cordons d’alimentation pour
remplacer les fiches, car ceci peut présenter un
danger potentiel.
This device complies with Industry Canada licenceexempt RSS standard(s).
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation.
The term ‘’IC:‘’ before the certification/registration
12. Ne faites fonctionner cet appareil qu’avec le type
d’alimentation indiqué sur l’étiquette. Si vous
ne connaissez pas le type d’alimentation que
11. Ne laissez aucun objet reposer ni appuyer sur le
cordon d’alimentation. N’installez pas cet appareil
dans un endroit où l’on risque d’écraser le cordon
d’alimentation ou de le piétiner.
Technical specifications
Mises en garde
1. Utilisez et entreposez le produit à une température
entre 0˚ C (32˚F) et 40˚C (104˚ F).
Frequency
control
Crystal controlled PLL synthesizer
2. N’exposez pas cet appareil à des froids ou des
chaleurs extrêmes, ainsi qu’à la lumière directe
du soleil. Ne l’installez pas près d’une source de
chauffage.
Transmit
frequency
Camera unit: 2412 - 2462 MHz
Channels
11
3. D’autres produits électroniques peuvent causer
des interférences auprès de votre caméra
IP. Essayez d’installer votre caméra IP le plus
loin possible de ces dispositifs électroniques :
routeurs sans fil, radios, téléphones cellulaires,
interphones, moniteurs de pièces, téléviseurs,
ordinateurs personnels, appareils électriques de
cuisine et téléphones sans fil.
Nominal
effective
range
Maximum power allowed by FCC
and IC. Actual operating range may
vary according to environmental
conditions at the time of use.
Power
requirement
Camera unit power adapter:
Input: 100-240V AC 400mA 50/60Hz
Output: 5V DC 2000mA
Stimulateurs cardiaques implantés dans
l’organisme
Les simulateurs cardiaques (ne s’applique qu’aux
dispositifs numériques sans fil):
L’organisme ‘Wireless Technology Research, LLC
(WTR)’, une firme de recherche indépendante,
a mené une évaluation pluridisciplinaire des
interférences entre les téléphones sans fil portatifs
et les stimulateurs cardiaques implantés dans
l’organisme. Appuyée par l’Administration des
aliments et drogues (FDA) des États-Unis, la firme
WTR recommande aux médecins:
Avis aux détenteurs de stimulateurs cardiaques
•
Vous devriez maintenir les dispositifs sans fil à au
moins six pouces du simulateur cardiaque.
•
Ils ne doivent PAS placer le téléphone sans fil
directement sur le stimulateur cardiaque, tel que
dans une poche de chemise, lorsque celui-ci est
en marche.
L’étude effectuée par l’organisme WRS n’a pas
identifié de risque pour les détenteurs de simulateurs
cardiaques causés par les gens qui utilisent
dispositifs sans fil à proximité de ceux-ci.
Champs électromagnétiques (EMF)
Ce produit de VTech est conforme à toutes
les normes se rapportant aux champs
électromagnétiques (EMF) standard. Si vous le
manipulez correctement en suivant les instructions
de ce guide, son utilisation sera sécuritaire pendant
de nombreuses années, selon les meilleures
évidences scientifiques dont nous disposons
aujourd’hui.
Designed to fit your home.
And your life.
VTech Communications, Inc.
A member of THE VTECH GROUP OF COMPANIES.
VTech is a registered trademark of VTech Holdings Limited.
Specifications are subject to change without notice.
© 2014 VTech Communications, Inc.
All rights reserved. 07/14. VC931_CIB_V1.0
Document order number: 91-007917-010-100
14. Ne placez pas cet appareil sur un chariot, meuble,
trépied, support de montage ni table chancelants.
15. Les trous et ouvertures du boîtier, situés à
l’arrière de l’appareil ou sous celui-ci, servent à
aérer l’appareil. Pour l’empêcher de surchauffer,
ne bloquez sous aucun prétexte ces ouvertures et
n’empêchez pas l’aération adéquate de l’appareil
en le plaçant sur un lit, divan, tapis ou toute autre
surface similaire. De même, ne le positionnez
pas à proximité ni au-dessus d’une source de
chaleur ou d’un calorifère. De plus, ne placez pas
l’appareil dans un endroit avant de vous assurer
qu’il y ait une bonne circulation d’air.
16. N’enfoncez jamais d’objets à travers les
ouvertures de cet appareil, car ils pourraient
entrer en contact avec des points de tension
dangereux ou causer des courts-circuits qui
peuvent dégénérer en incendies ou en risques
d’électrocution. Ne renversez jamais de liquide
dans ce produit.
17. Afin de réduire les risques d’électrocution, ne
démontez pas cet appareil, mais apportez-le dans
un centre de service autorisé. L’ouverture du
boîtier ou le retrait de toutes pièces que contient
cet appareil, à l’exception de l’accès autorisé à
certaines portes ou ouvertures, risque de vous
exposer à des points de tension dangereux ou
d’autres dangers. Un remontage incorrect peut par
la suite présenter des risques d’électrocution.
18. Vous devriez tester la réception chaque fois que
vous mettez l’appareil en fonction.
19. Examinez les composantes afin de vérifier si
celles-ci ne sont pas endommagées.
20. Soyez avisé de la perte de la confidentialité
lorsque vous utilisez les ondes publiques. Les
conversations peuvent être entendues par
d’autres moniteurs de bébé, des téléphones sans
fil, des scanneurs, etc.
21. Les enfants devraient être supervisés afin de
vous assurer qu’ils ne jouent pas avec l’appareil.
22. Les petites pièces de ce moniteur peuvent être
avalées par les bébés ou les petits enfants.
Veuillez tenir ces pièces hors de portée des
enfants.
23. Le produit n’est pas conçu pour être utilisé
par des personnes (incluant des enfants) aux
capacités physiques, sensorielles ou mentales
réduites ou qui manquent d’expérience et de
connaissances, à moins qu’on leur ait donné
suffisamment de supervision ou d’instructions
relativement à l’utilisation de l’appareil par une
personne responsable de leur sécurité.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1.1-111
Instance ID                     : uuid:cc876705-61ff-4967-a8b6-71b3b0b83ea9
Document ID                     : adobe:docid:indd:eff33518-07cc-11e4-8b31-8c09b45ffba4
Rendition Class                 : proof:pdf
Derived From Instance ID        : 0d942ae0-071c-11e4-a893-df9de8fdb97d
Derived From Document ID        : adobe:docid:indd:418f3794-fb7a-11e3-bf41-d7683c775a21
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : xmp.iid:B4DA3E2FCB40E311AF07C2C3061CE70A, xmp.iid:2D2C4C8BC540E311AF07C2C3061CE70A, xmp.iid:B4DA3E2FCB40E311AF07C2C3061CE70A, xmp.iid:849908ED10FCE311837B88FD2E930723, xmp.iid:064BCF0CB0FAE311A4E6FAEB7B0D00BC, xmp.iid:074BCF0CB0FAE311A4E6FAEB7B0D00BC, xmp.iid:064BCF0CB0FAE311A4E6FAEB7B0D00BC, xmp.iid:42F210505D9FE311B2EFBCEC478F4F2B, xmp.iid:E051964C4EFBE311BDA2B2B4D4F36272, xmp.iid:E6ACB53FF9FCE3118454C848F307E73D, xmp.iid:E7ACB53FF9FCE3118454C848F307E73D, xmp.iid:2D2C4C8BC540E311AF07C2C3061CE70A, xmp.iid:D80354374503E4118EBAD95E33729757, xmp.iid:E8ACB53FF9FCE3118454C848F307E73D, xmp.iid:681005824AB6E31193E8A3B5AE173782, xmp.iid:5CCB1C7C3F62E3119840E311387300E2
Manifest Reference Document ID  : xmp.did:B4DA3E2FCB40E311AF07C2C3061CE70A, xmp.did:2D2C4C8BC540E311AF07C2C3061CE70A, xmp.did:B4DA3E2FCB40E311AF07C2C3061CE70A, xmp.did:849908ED10FCE311837B88FD2E930723, xmp.did:064BCF0CB0FAE311A4E6FAEB7B0D00BC, xmp.did:074BCF0CB0FAE311A4E6FAEB7B0D00BC, xmp.did:064BCF0CB0FAE311A4E6FAEB7B0D00BC, xmp.did:42F210505D9FE311B2EFBCEC478F4F2B, xmp.did:E051964C4EFBE311BDA2B2B4D4F36272, xmp.did:E6ACB53FF9FCE3118454C848F307E73D, xmp.did:E7ACB53FF9FCE3118454C848F307E73D, xmp.did:2D2C4C8BC540E311AF07C2C3061CE70A, xmp.did:D80354374503E4118EBAD95E33729757, xmp.did:E8ACB53FF9FCE3118454C848F307E73D, xmp.did:681005824AB6E31193E8A3B5AE173782, xmp.did:5CCB1C7C3F62E3119840E311387300E2
Create Date                     : 2014:07:10 14:55:54+08:00
Modify Date                     : 2014:07:10 14:55:58+08:00
Metadata Date                   : 2014:07:10 14:55:58+08:00
Creator Tool                    : Adobe InDesign CS2 (4.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 10365 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS2 (4.0)

EXIF Metadata provided by EXIF.tools