VTech Telecommunications 80-9678-00 4-Line Small Business System, Deskset User Manual

VTech Telecommunications Ltd 4-Line Small Business System, Deskset

User Manual

Download: VTech Telecommunications 80-9678-00 4-Line Small Business System, Deskset User Manual
Mirror Download [FCC.gov]VTech Telecommunications 80-9678-00 4-Line Small Business System, Deskset User Manual
Document ID2573311
Application IDN1dAxzPT5dwoaggAK5cG8g==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize357.51kB (4468813 bits)
Date Submitted2015-04-02 00:00:00
Date Available2015-04-02 00:00:00
Creation Date2015-03-16 16:02:42
Producing SoftwareAdobe PDF Library 11.0
Document Lastmod2015-03-16 16:02:59
Document TitleUser Manual
Document CreatorAdobe InDesign CC 2014 (Windows)

Go to
www.vtechphones.com
to register your product for
enhanced warranty support and
the latest VTech product news.
CM18245
4-Line
Small Business System
Deskset
BC
User’s manual
Congratulations
on your purchase of this VTech product. Before using this product, please read
the Important safety information.
This user’s manual provides you with the complete installation, setup and
operation instructions.
For customer service or product information, visit our website at
www.vtechphones.com or call 1 (800) 595-9511. In Canada, please dial
1 (800) 267-7377.
Model number: 		
CM18245
Type:		
4-Line Small Business System Deskset
Serial number:
Purchase date:
Place of purchase:
Both the model and serial numbers of your VTech product can be found on the
bottom of the deskset.
Save your sales receipt and original packaging in case it is necessary to return
your telephone for warranty service.
Compatible with
Hearing Aid T-Coil
TIA-1083
Telephones identified with this logo have reduced noise and interference when
used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083
Compliant Logo is a trademark of the Telecommunications Industry Association.
Used under license.
Important safety information
This symbol is to alert you to important operating or servicing instructions that may appear
in this user’s manual. Always follow basic safety precautions when using this product to
reduce the risk of injury, fire, or electric shock.
Safety information
•
Read and understand all instructions in the user’s manual. Observe all markings on
the product.
•
Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock
from lightning.
•
Do not use the telephone to report a gas leak in the vicinity of the leak. Under certain
circumstances, a spark may be created when the adapter is plugged into the power outlet, or
when the handset is replaced in its cradle. This is a common event associated with the closing
of any electrical circuit. The user should not plug the phone into a power outlet, and should
not put a charged handset into the cradle, if the phone is located in an environment containing
concentrations of flammable or flame-supporting gases, unless there is adequate ventilation. A
spark in such an environment could create a fire or explosion. Such environments might include:
medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline
vapors; etc.); a leak of natural gas; etc.
•
Do not use this product near water, or when you are wet. For example, do not use it in a wet
basement or shower, or next to a swimming pool, bathtub, kitchen sink, or laundry tub. Do not
use liquids or aerosol sprays for cleaning. If the product comes in contact with any liquid, unplug
any line or power cord immediately. Do not plug the product back in until it has dried thoroughly.
•
Avoid placing the telephone system in places with extreme temperature, direct sunlight, or other
electrical devices. Protect your phone from moisture, dust, corrosive liquids and fumes.
•
Install this product in a protected location where no one can trip over any line or power cords.
Protect cords from damage or abrasion.
•
If this product does not operate normally, see the Troubleshooting section on pages 70-73 of this
user’s manual. If you cannot solve the problem, or if the product is damaged, refer to the Limited
warranty section on pages 80-81. Do not open this product except as directed in your user’s manual.
Opening the product or reassembling it incorrectly may expose you to hazardous voltages or
other risks.
•
This power adapter is intended to be correctly oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place if it is plugged into a ceiling, an under-the-table
or cabinet outlet.
•
For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall
be easily accessible.
Caution:
•
Use only the power adapter provided with this product. To obtain a replacement,
visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada,
dial 1 (800) 267-7377.
•
Use only the supplied rechargeable battery or replacement battery (model BT266342).
To order a replacement battery, visit our website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, dial 1 (800) 267-7377.
•
To prevent risk of fire or battery explosion, replace with the correct battery type.
Dispose of used batteries according to the instructions.
Important safety information
Especially about cordless telephones
•
Electrical power: The deskset must be connected to a working electrical outlet. The electrical
outlet should not be controlled by a wall switch. Calls cannot be made from the handset if the
deskset is unplugged, switched off or if the electrical power is interrupted.
•
Power adapter: The power adapter is intended to be correctly oriented in a vertical or floor mount
position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling,
under-the-table or cabinet outlet.
•
Rechargeable batteries: This product contains nickel-metal hydride rechargeable batteries.
Exercise care in handling batteries in order not to create a short circuit with conductive material
such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm.
Observe proper polarity between the battery and the battery charger.
•
Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do
not burn or puncture. Like other batteries of this type, if burned or punctured, they could release
caustic material which could cause injury.
The RBRC® Seal means that the manufacturer is voluntarily participating in
an industry program to collect and recycle nickel-metal hydride rechargeable
batteries when taken out of service within the United States. These batteries
may be taken to a participating local retailer of replacement batteries or recycling
center. You may call 1 (800) 8-BATTERY® for locations accepting spent Ni-MH
batteries.
RBRC® and 1-800-8-BATTERY® are registered trademarks of the Rechargeable
Battery Recycling Corporation.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless telephones):
Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary
evaluation of the interference between portable wireless telephones and implanted cardiac
pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to
physicians that:
Pacemaker patients
•
Should keep wireless telephones at least six inches from the pacemaker.
•
Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket,
when it is turned ON.
•
Should use the wireless telephone at the ear opposite the pacemaker.
WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using
wireless telephones.
Especially about telephone answering systems
Two-way recording: This unit does not sound warning beeps to inform the other party that the call is
being recorded. To ensure that you are in compliance with any federal or state regulations regarding
recording a telephone call, you should start the recording process and then inform the other party
that you are recording the conversation.
SAVE THESE INSTRUCTIONS
ii
Parts checklist
Your telephone package contains the following items. Save your sales receipt
and original packaging in the event warranty service is necessary.
Go to
www.vtechphones.com
to register your product for
enhanced warranty support and
the latest VTech product news.
CM18245
4-Line
Small Business System
Deskset
BC
Go to
www.vtechphones.com
to register your product for
enhanced warranty support and
the latest VTech product news.
CM18245
4-Line
Small Business System
Deskset
BC
User’s manual
User’s manual
Quick start guide
Quick start guide
Deskset power
adapter
Battery Pack
BT166342/BT266342
2.4V 750mAh Ni-MH
WARNING:DO NOT BURN OR
PUNCTURE BATTERIES
MADE IN CHINA
GY1224
Deskset
Directory card X2
Handset with coiled
cord installed
Wall mount bracket
iii
Backup battery
Table of contents
Getting started
Options while on calls..............................27
Call waiting...........................................27
Volume control......................................27
Mute.....................................................27
Temporary tone dialing.........................27
Hold......................................................28
Switching between lines.......................28
Call privacy...........................................29
Recording a call....................................30
Chain dialing.........................................31
Redial......................................................32
To view the 10 most recently dialed
numbers...............................................32
To redial a number................................32
To copy a redial entry to directory........32
To delete a number...............................33
Auto-redial............................................33
Conference call........................................34
Options during a conference call..........35
Intercom...................................................36
Make an intercom call to
an extension.........................................36
Answer an intercom call.......................36
End an intercom call.............................36
Answer an incoming call during an
intercom call.........................................36
Hold an intercom call............................37
Handle an intercom call by the
private mailbox.....................................37
Call transfer.............................................38
Blind transfer........................................38
Call transfer using intercom.....................39
Transfer a call and speak to the
receiving party......................................39
Paging.....................................................40
Make a paging call to an extension......40
Set and edit a group for paging call......40
Make a paging call to multiple
extensions............................................41
Installation.................................................1
Backup battery installation........................2
Backup battery charging............................3
Deskset installation....................................4
Wall mount installation (Optional)..............6
Tabletop to wall installation.....................6
Wall to tabletop installation.....................7
Add and register a deskset........................8
Add a corded headset (Optional)...............9
Deskset overview....................................10
Deskset icon display................................16
Alert tones and lights...............................17
Telephone settings
Deskset setup..........................................18
Menu settings.......................................18
Ringer volume......................................18
Ringer tone...........................................19
Do not disturb (DND)............................19
LCD contrast........................................20
Key tone...............................................20
LCD language......................................21
Primary line..........................................21
Call privacy...........................................22
Hold reminder.......................................22
Deskset name......................................23
Factory reset........................................23
Deskset information..............................24
User support.........................................24
Telephone operation
Telephone operation................................25
Line indicators......................................25
Making and ending a call......................25
On hook dialing (predialing).................26
Full duplex speakerphone....................26
Answering a call...................................26
Temporary ringer silencing...................26
iv
Answering system
End a paging call..................................41
Delete the group settings.....................41
Speed dial................................................42
Assign a speed dial entry.....................42
Dial a speed dial entry..........................43
Delete a speed dial entry.....................44
Private mailbox setup..............................57
Activate private mailbox........................57
Number of rings....................................57
Announcement.....................................58
Remote access code............................59
Message Length...................................60
Call screening.......................................60
Call intercept........................................61
Message alert.......................................61
Remaining time....................................62
Answering system operation...................63
New message indication......................63
Call screening.......................................63
Call intercept........................................63
Message playback................................63
Options during playback.......................64
Transfer messages...............................64
Delete all mailbox messages................65
Record memo.......................................65
Remote access........................................66
Directory
About the directory..................................45
Capacity...............................................45
Exit the directory..................................45
Create directory entries...........................46
Create a new directory entry................46
Review directory entries ......................47
Search directory......................................48
Search by name...................................48
Dial, delete or edit entries........................49
Display dial...........................................49
Delete an entry.....................................49
Edit an entry.........................................49
Call history
About the caller ID...................................50
Information about caller ID with
call waiting............................................50
Caller ID information................................51
How the caller ID information
(call log) works.....................................51
Caller ID operation...................................52
Memory match.....................................52
Missed (new) calls indicator.................52
Review the caller ID information...........52
View dialing options..............................53
Dial a call history entry.........................53
Save a call history entry to
the directory.........................................54
Delete entries.......................................55
Reasons for missing caller ID
information...........................................56
Appendix
Deregister a deskset................................67
Deskset display screen messages..........68
Troubleshooting.......................................70
Maintenance............................................74
FCC part 68 and ACTA............................75
FCC part 15.............................................76
California Energy Commission battery
charging testing instructions................77
For C-UL compliance only.......................78
Limited warranty......................................80
Technical specifications...........................82
Index.......................................................83
Getting started
Installation
This CM18245 deskset is an accessary of CM18445 concole. You must
purchase the CM18445 console and register this deskset to the console before
use.
Install and set up CM18445 console first before expanding your system with this
CM18245 deskset.
Phone lines
DECT
CM18245 deskset
(Ext. 1, 2, 3...)
CM18445 console
(Ext. 0)
Optional 2.5mm
corded headset
(purchased
separately)
Install the deskset close to a power outlet not controlled by a wall switch.
The deskset can be placed on a flat surface or vertically mounted on the
wall (pages 6-7). For optimum range and better reception, place the
CM18445 console in a central and open location.
Your product may be shipped with a protective sticker covering the deskset
display, remove it before use.
For customer service or product information, visit our website at
www.vtechphones.com or call 1 (800) 595-9511. In Canada, dial
1 (800) 267-7377.
Avoid placing the deskset too close to:
• Communication devices such as television sets, VCRs, or other cordless telephones.
• Excessive heat sources.
• Noise sources such as a window with traffic outside, motors, microwave ovens,
refrigerators, or fluorescent lighting.
• Excessive dust sources such as a workshop or garage.
• Excessive moisture.
• Extremely low temperature.
• Mechanical vibration or shock such as on top of a washing machine or
work bench.
Getting started
Backup battery installation
Install the backup battery, as shown below. In the event of a power failure, the
charged backup battery allows the deskset to operate. The backup battery
will be charged when you connect the AC power adapter to a wall outlet not
controlled by a wall switch.
1. Press down on the tab to open the battery compartment cover.
3. Align the cover flat against the
battery compartment, then press
down until it clicks into place.
Battery Pack
BT166342/BT263342
2.4V 300mAh Ni-MH
WARNING:DO NOT BURN OR
PUNCTURE BATTERIES
MADE IN CHINA
GY1224
Battery Pack
BT166342/BT263342
2.4V 300mAh Ni-MH
WARNING:DO NOT BURN OR
PUNCTURE BATTERIES
MADE IN CHINA
GY1224
2. Place the battery in the
compartment. Make sure the
supplied battery with the label
THIS SIDE UP faces up, as
indicated.
NOTE: Use only the supplied rechargeable battery or replacement battery (model BT266342).
To order a replacement battery, visit our website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, please dial 1 (800) 267-7377.
Getting started
Backup battery charging
When the deskset loses power with the backup battery installed, the screen
indicates the battery status (see the following table). The backup battery is
fully charged after 16 hours of continuous charging. See the table on page 82 for
battery operating times.
The following table summarizes the battery charge indicators and actions to
take.
Battery indicators
Battery status
Action
The screen shows
and it flashes.
Battery has enough
charge to be used for a
short time.
Charge without
interruption at least one
hour.
The screen shows .
Battery is fully charged.
Keep the backup
battery in the battery
compartment to
recharge.
NOTE: When there is a power outage, make sure you have also installed four AA batteries in
the console to allow continuous telephone operation.
Getting started
Deskset installation
1. Install the mounting bracket for tabletop use.
Low tabletop position: Insert the fixed tabs of the mounting bracket into slots
A and B . Press the flexible tabs into slots C and D until they click into place.
Low tabletop position
High tabletop position: Insert the fixed tabs of the mounting bracket into slots
A and B . Press the flexible tabs into slots C and D until they click into place.
High tabletop position
Getting started
Deskset installation
2. Connect the coiled handset and the power cord to the deskset.
Plug the large end of the
power adapter into a power
outlet not controlled by a
wall switch.
Plug the end of the
coiled handset cord into
the jack at the bottom of
the deskset.
Raise the antenna for
optimum wireless range
and performance.
Plug the small end of the
power adapter into the
power jack at the bottom of
the deskset.
Route the power adapter
cord through the slot at the
bottom of the deskset.
NOTES:
•
Use only the power adapter supplied with this product. To order a replacement power adapter,
visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, please
dial 1 (800) 267-7377.
•
The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs
are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.
Getting started
Wall mount installation (Optional)
Tabletop to wall installation
To install your deskset in the wall installation position, make sure you first
unplug the power adapter from the electrical outlet.
1. Place your corded handset aside. Use a coin to rotate the handset tab 180
degrees. The protruding edge holds the corded handset when the deskset is
mounted on the wall.
Protruding edge
Handset tab
2. Press in the direction indicated by the arrows to release and remove the
mounting bracket from the deskset.
High tabletop position
Low tabletop position
3. Place the corded handset back to the deskset. Plug the small end of the
power adapter cord into the power jack on the back of the deskset.
Getting started
Wall mount installation (Optional)
4. Align the wall mounting holes on the back of the deskset with the tabs of the
standard wall plate. Push the deskset down until it clicks securely in place.
5. Plug the large end of the power adapter into an electrical outlet not
controlled by a wall switch.
Wall to tabletop installation
Follow the instructions below to return the deskset from wall installation to
tabletop position.
1. Remove the deskset from the wall. Unplug the power adapter cord from the
electrical outlet.
2. Use a coin to rotate the handset tab 180 degrees.
3. Follow the steps in Deskset installation on pages 4-5 to install your deskset
for tabletop use.
Getting started
Add and register a deskset
You can add CM18245 desksets to the CM18445 console at any time, each
new deskset must be registered with the console before use.
The desksets are assigned with available extension numbers starting from 1
in ascending order (1 to 9). You can register a maximum of nine devices to the
console.
To register the deskset to the CM18445 console:
Start registration when the deskset shows
1) Press MENU on Console> Registration> Register
Ext. and 2) Press # on this extension to register.
alternately.
1. On the deskset, press #. The deskset shows
Registering... Please wait.
2. On the console, press MENU/SELECT.
3. Press or to scroll to Registration, then press
MENU/SELECT or /SKIP.
4. Press MENU/SELECT or /SKIP to choose Register
ext. The console shows Registering....
5. You hear a beep sound when the registration process
is successful. The deskset shows DESKSET X
registered. (X represents the extension number,
ranged from 1 to 9). It takes up to 60 seconds to
complete the registration process.
6. Lift the handset. If you hear a dial tone, the registration
was successful.
1) Press MENU
on Console>
Registration>
Register Ext.
Registering...
Please wait
Directory
Call log
Ringer setting
Console setup
Line mode
Ans sys setup
>Registration
Registration:
>Register ext
Deregistration
NOTE: If the registration is not successful, the deskset returns to the
previous screen. Try the registration process again.
DESKSET X
registered.
Getting started
Add a corded headset (Optional)
You can use this telephone handsfree when you install any industry-standard
2.5mm corded telephone headset (purchased separately).
To add a corded headset to the deskset
Side view of the deskset
MS2015 Engraving:
1. Lift open and rotate the plastic cover.
Use only
Supplied
2. Then, plug a 2.5 mm headset into
the HEADSET (
Adapter
deskset.
) jack on the side of the
MS2085 Engraving:
NOTE: The HEADSET button on the deskset controls only the corded headset. For more details
on the operation of the corded headset, refer to the user’s manual of the corded headset.
5.1
Use only
Supplied
Adapter
L4
L3/4
L2
L1/2
Getting started
Deskset overview
MESSAGE WAITING indicator
• On when there are new messages in
the private mailbox.
LINE 1-LINE 4 keys
• Press to make or answer a call on the
desired line.
ANS SYS
• Press to enter the answering system
menu.
DELETE
• While playing a message, press to
delete the message.
• While reviewing the caller ID
information, press to delete an
individual entry.
• While predialing, press to delete digits.
/DIR
• Press to view directory information.
/CID
• Press to view caller ID information.
Speed dial keys
• Press to dial the desired speed dial
number.
LOWER
MIC
• When assigning or dialing a speed dial
number, press to switch to the lower
location (the second 16 locations) of a
speed dial key.
Navigation keys
• While in menus, press
or
to scroll through the
menus, highlight items or change settings. Press /SKIP
to enter the selected item, or press /REPEAT to return
to the previous menu.
• While entering names or numbers, press /REPEAT or
/SKIP to move the cursor to the left or right.
• While playing back messages, press /REPEAT to
repeat the message, or press /SKIP to skip to the next
message.
10
Getting started
Deskset overview
TRANSFER
CONFERENCE
• Press to transfer a
call to an extension.
• Press to add another
extension or outside
line to an existing call.
HOLD
MENU/SELECT
• Press to place an
outside call on hold.
• Press to enter the
menu.
FLASH
• While in the menu,
press to select an
item or save an entry
or setting.
• During a call,
press to answer an
incoming call when
you receive a call
waiting alert.
CANCEL
AUTO REDIAL
• While in a menu,
press to cancel an
operation and exit the
menu display.
• Press to view the
last 10 numbers
dialed.
DND (Do not
disturb)
• Press once to turn
the feature on. Press
again to turn off.
MUTE
• During a call,
press to mute the
microphone.
SPEAKER
INTERCOM
• Press to turn on the
speakerphone. Press
again to turn it off.
• When in idle mode,
press to initiate an
intercom call.
PAGE
HEADSET
+/VOL/-
• Press to begin a
one-to-one or
one-to-group broadcast.
• When a corded headset
is connected to the
deskset, press to make,
answer or hang up a
call.
• During a call, press to
adjust the listening volume.
• During message playback,
press to adjust the
playback volume.
• Press to adjust the ringer
volume when in idle mode.
11
Getting started
Deskset overview
Directory card
Use the directory card to record the names of the speed dial numbers you
stored.
To write names on the directory card:
1. Write the information on the directory card
that comes with the package.
2. Insert the edge of the directory card in the
slot at the front of the deskset, under the
plastic cover.
12
Getting started
Deskset overview
Menus
The > symbol highlights a menu item.
Main menu
• Directory
• Call history
• Ringer setting
• Deskset setup
• Speed dial
• User support
• Deskset info
• Factory reset
>Directory
Call history
Ringer setting
Deskset setup
Answering system menu
• Play messages
• Mailbox mode
0 New message
>Play messages
• Record memo
Mailbox mode
• Gen MB
Record memo
• Settings
• Remaining time
• Delete all old
Using menus
• Press MENU/SELECT to show the main menu; or
press ANS SYS to show the answering system menu.
• Press or to scroll through menu items.
• Press MENU/SELECT or /SKIP to select a highlighted menu item.
• Press MENU/SELECT to save changes.
• Press CANCEL to cancel an operation, exit the menu display or return to the
idle screen.
13
Getting started
Deskset overview
The following tables provides you with more details on the main menu and the
answering system menu of the deskset.
Table 1 - Main menu (Press MENU/SELECT in idle screen)
Menu
Description
Reference
Directory
Review, add or delete directory entries. Pages 45-49
Call history
Review, delete call history entries, or
copy an entry to directory.
Pages 50-56
Ringer setting
Set ringer volume and ring tone for an
incoming call.
Pages 18-19
Deskset setup
Set LCD contrast, key tone, language, Pages 20-22
Primary line*, call privacy**, deskset
name, and hold remainder.
*Primary line defines which line is
automatically selected each time you
pick up the corded handset or press
the speakerphone.
**Call privacy defines whether other
extensions can barge in to join a call in
progress.
Speed dial
Program the desired telephone
Pages 42-44
numbers or extension numbers into the
speed dial keys.
User support
Display a website for you to get extra
support.
Page 24
Deskset info
Display ring group status, and
the extension number of a paired
accessory.
Page 24
Factory reset
Reset all settings of the deskset to the
factory default.
Page 23
14
Getting started
Deskset overview
Table 2 - Answering system menu (Press ANS SYS in idle screen)
Menu
Description
Reference
Play messages
Play messages in the private mailbox.
Pages 63-64
Mailbox mode
Turn on or off the private mailbox, or
set to play an announcement only to
caller when no one is available to pick
up the call.
Page 57
Record memo
Record reminders for yourself or others Page 65
who are using the same telephone
system.
Gen MB
Play or delete messages in the general Pages 63-64
mailbox.
Settings
Set up the deskset’s private mailbox.
Pages 57-61
Mailbox On, Announce only - Set
the number of rings before the system
answers the incoming calls, and record
your own greeting announcements.
Remote access - Modify the passcode
for users to access general mailbox
remotely by making a call to one of the
telephone lines.
Message length - Set the maximum
duration allowed for any voice
messages.
Call screening - Set whether the
deskset user hear the caller whenever
a voice recording is taking place.
Call intercept - Set whether users of
other system extensions can intercept
and stop a recording in private mailbox
and talk to the caller.
Msg alert tone - Set whether a tone
is played when there are unattended
messages in the general mailbox.
Remaining time
Check the remaining recording time
and number of messages available in
the private mailbox.
Page 62
Delete all old
Delete all old messages in the private
mailbox.
Page 65
15
Getting started
Deskset icon display
1 2 3 4 5
On when any corresponding extensions are in use.
Ringer off - On steadily when the ringer volume is set to OFF or the do not
disturb function is on.
Headset - On steadily when using a corded headset.
Backup battery indicator - Shows the backup battery status.
-Mute
Microphone is muted.
-Priv
On steadily when the call privacy feature is set to On.
-Rec
On steadily when recording a call.
Conf.
On steadily during a conference call.
LOWER
The lower location of speed dial keys is active.
16
Getting started
Alert tones and lights
Alert tones
One beep
The deskset is recording an announcement or memo.
-ORYou have set the message alert tone on.
-ORThere is an incoming call waiting.
Hold tone (two beeps)
You have set the hold reminder on; a call has been on hold for
more than three minutes.
Lights
MESSAGE WAITING
Large
lighted
display
• On when there are new private
messages.
LINE 1/LINE 2/LINE 3/LINE 4
• On when a telephone line is in use.
• Flashes slowly when the telephone
line is on hold.
• Flashes quickly when there is an
incoming call or a transfer call.
DND (Do not disturb)
• On when the do not disturb
feature is on.
MUTE
• On with the microphone is muted.
SPEAKER
• On when the speakerphone
is on.
INTERCOM
PAGE
HEADSET
• On when the deskset
is on an intercom call.
• On when deskset
begins a
one-to-one or
one-to-group
broadcast.
• On when the corded headset is
in use.
• Flashes when there is
an incoming intercom
call.
17
Telephone settings
Deskset setup
Menu settings
Use this menu to change the deskset settings.
1. Press MENU/SELECT when in idle mode (when the deskset is not in use) to
enter the main menu.
2. Press or to scroll to the feature to be changed. The > symbol indicates
the selected menu item.
3. Press MENU/SELECT or /SKIP to select the menu item.
4. Press CANCEL to exit setup without making changes.
NOTE: Press CANCEL to cancel an operation, exit the menu display, or return to idle mode.
Ringer volume
Use this feature to set the ringer volume to one of six levels or turn the ringer off.
When the ringer is off, the icon appears on the deskset screen. The deskset
stores the volume setting for all lines.
1.
2.
3.
4.
5.
When the deskset is idle, press MENU/SELECT.
Press or to scroll to Ringer setting, then press MENU/SELECT or /SKIP.
Press MENU/SELECT again or press /SKIP to select Ringer volume.
Press , , or +/VOL/- on the deskset to adjust the ringer volume.
Press MENU/SELECT to save the setting and return to the previous menu. To
exit without making changes, press CANCEL or /REPEAT.
-ORWhen the deskset is idle, press +/VOL/- to adjust the ringer volume, then press
MENU/SELECT to save.
NOTE: The ringer volume also determines the ringer volume for intercom calls. If the deskset
ringer volume is set to off, it is silenced for all incoming calls, including intercom calls.
18
Telephone settings
Deskset setup
Ringer tone
Use this feature to choose one of the ten ringer tones for incoming calls. You
can choose different ringer tones for different lines so you can easily identify
which line is calling.
When the deskset is idle, press MENU/SELECT.
Press or to scroll to Ringer setting, then press MENU/SELECT or /SKIP.
Press or to scroll to Ringer tone, then press MENU/SELECT or /SKIP.
Press or to select the desired line (Line 1, Line 2, Line 3 or Line 4),
then press MENU/SELECT or /SKIP.
5. Press
or
to select a desired ringer tone.
6. Press MENU/SELECT to save the setting and return to the previous menu. To
exit without making changes, press CANCEL or /REPEAT.
7. Repeat steps 4-6 above to choose ringer tones for other lines if desired.
1.
2.
3.
4.
Do not disturb (DND)
Use this feature to silence your deskset. When you activate the do not disturb
function, the icon appears on the deskset screen. You will not receive any
paging call and you will not hear rings of incoming call or intercom call.
Instead, the LINE 1-LINE 4 indicator flashes to signal an incoming call. If you
receive an intercom call, the extension number of that intercom call appears on
the screen display.
1. Press DND to prevent interruptions. The DND indicator turns on.
2. Press DND again to resume normal call alerts. The DND indicator turns off.
19
Telephone settings
Deskset setup
LCD contrast
Use this feature to adjust the screen contrast to one of five levels to optimize
readability in different lighting conditions.
1.
2.
3.
4.
5.
When the deskset is idle, press MENU/SELECT.
Press or to scroll to Deskset setup, then press MENU/SELECT or /SKIP.
Press MENU/SELECT again or press /SKIP to select LCD contrast.
Press , , or +/VOL/- on the deskset to adjust the screen contrast level.
Press MENU/SELECT or /SKIP to save the setting and return to the previous
menu. To exit without making changes, press CANCEL or /REPEAT.
Key tone
The deskset is set to beep with each key press. If you turn off the key tone,
there are no beeps when you press keys.
1. When the deskset is idle, press MENU/SELECT.
2. Press or to scroll to Deskset setup, then press MENU/SELECT or /SKIP.
3. Press or to scroll to Key tone, then press
MENU/SELECT or /SKIP.
4. Press or to choose On or Off.
5. Press MENU/SELECT or /SKIP to save the setting and return to the previous
menu. To exit without making changes, press CANCEL or /REPEAT.
20
Telephone settings
Deskset setup
LCD language
This feature allows you to change the language used for all screen displays.
The language settings on the console and desksets are independent. By
default, the language is set to English.
1. When the deskset is idle, press MENU/SELECT.
2. Press
or
to scroll to Deskset setup, then press MENU/SELECT or
/SKIP.
3. Press
or
to scroll to Language, then press MENU/SELECT or /SKIP.
4. Press
or
to select English, Français or Español.
5. Press MENU/SELECT or /SKIP to save the setting and return to the
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
Primary line
Use this feature, also known as automatic line selection, to choose which line is
automatically selected each time you make an outside call. If you select Auto,
the deskset picks up any available line starting from Line 1.
1. When the telephone is idle, press MENU/SELECT.
2. Press or to scroll to Deskest setup, then press
MENU/SELECT or /SKIP.
3. Press or to scroll to Primary line, then press
MENU/SELECT or /SKIP.
4. Press or to choose the desired line, then press MENU/SELECT or /SKIP.
To exit without making changes, press CANCEL.
NOTE: If you install less than four telephone line cords to the CM18445 console and select
Auto as your Primary line setting, make sure you plug in your telephone line cords starting
from L1/2 jack. Avoid having any unoccupied telephone jack between other occupied
telephone jacks.
21
Telephone settings
Deskset setup
Call privacy
The call privacy is set to Off by default. The deskset allows other extensions
to join a call in progress. You can turn this setting on to ensure that only one
device uses a line at a time.
1. When the deskset is idle, press MENU/SELECT.
2. Press
or
to scroll to Deskset setup, then press MENU/SELECT or
/SKIP.
3. Press
or
to scroll to Call privacy, then press MENU/SELECT or /SKIP.
4. Press
or
to scroll to On or Off.
5. Press MENU/SELECT or /SKIP to save the setting and return to the
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
NOTE: To temporarily change the call privacy setting during a call, see page 29.
Hold reminder
When the deskset holds an outside call or an intercom call for more than three
minutes, it gives you a double beep every 30 seconds. You can set its volume to
to one of six levels or turn the reminder off.
1. When the deskset is idle, press MENU/SELECT.
2. Press
or
to scroll to Deskset setup, then press
/SKIP.
3. Press
or
to scroll to Hold reminder, then press
/SKIP.
MENU/SELECT
or
MENU/SELECT
or
4. Press , , or +/VOL/- on the deskset to adjust the reminder volume.
5. Press MENU/SELECT or /SKIP to save the setting and return to the
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
22
Telephone settings
Deskset setup
Deskset name
Use this feature to rename the deskset.
1. When the deskset is idle, press MENU/SELECT.
2. Press
or
to scroll to Deskset setup, then press MENU/SELECT or
/SKIP.
3. Press
or
to scroll to Deskset name, then press MENU/SELECT or
/SKIP.
4. Use the dialing keys to change the name (up to 10 characters).
• Press /REPEAT or /SKIP to move the cursor left or right.
• Press DELETE to delete a character.
• Press and hold DELETE to delete all characters.
5. Press MENU/SELECT to save the setting and return to the previous menu.
To exit without making changes, press CANCEL.
Factory reset
Use this feature to reset all settings of this deskset to their default settings.
1. When the deskset is idle, press MENU/SELECT.
2. Press
or
to scroll to Factory reset, then press MENU/SELECT or
/SKIP. The screen displays Are you sure to reset deskset?.
3. Press
or
to scroll to Yes or No.
4. Press MENU/SELECT or /SKIP to confirm your choice. The deskset reboots
to reset all settings.
23
Telephone settings
Deskset setup
Deskset information
This feature displays the ring group status of the deskset, and the extension
number of an accessory paired to the deskset.
Ring group defines if the deskset will ring when there is an incoming call at the
corresponding line. To change the setting and for more details, refer to the Ring
group section in the user’s manual of CM18445 console.
1. When the deskset is idle, press MENU/SELECT.
2. Press
or
to scroll to Deskset info, then press MENU/SELECT
or /SKIP.
3. Press CANCEL or /REPEAT to return to the previous menu.
User support
Use this feature to display the VTech website.
1. When the deskset is idle, press MENU/SELECT.
2. Press
or
to scroll to User support, then press MENU/SELECT or
/SKIP.
3. Press CANCEL or /REPEAT to return to the previous menu.
24
Telephone operation
Telephone operation
The deskset comes programmed to select a line automatically for calls when
you do not press a line key. To override the automatic line selection setting, see
Primary line on page 21 for details. When you answer a call, the deskset
automatically selects the ringing line.
Line indicators
Each of the four indicators on LINE 1-LINE 4 indicate the
state of the corresponding telephone line.
• On when the corresponding line is in use.
• Flashes slowly when the line is on hold.
• Flashes quickly when there is an incoming call or
a transfer call.
Making and ending a call
To make a call from the deskset:
1. Lift the handset or press SPEAKER .
-ORTo override automatic line selection, press LINE 1-LINE 4 for the desired line,
then lift the handset.
2. Wait for a dial tone, then enter the telephone number. The screen displays the
elapsed time as you talk (in hours, minutes and seconds).
To end a call from the deskset:
• Place the handset on the deskset to hang up.
-OR• If you are using the speakerphone, press SPEAKER
to hang up.
NOTE: The elapsed time is not affected by accessing services from your telephone service provider.
To make a call using a corded headset:
Make sure a corded headset is connected to the deskset (page 9).
1. Press HEADSET on the deskset.
2. Wait for a dial tone, then dial the number.
3. To hang up, press HEADSET.
25
Telephone operation
Telephone operation
On hook dialing (predialing)
1. Enter the telephone number. Press DELETE to make corrections.
2. Lift the handset or press SPEAKER
to dial.
-ORTo override automatic line selection, press LINE 1-LINE 4 for the desired line,
then lift the handset.
Full duplex speakerphone
During a call, press SPEAKER
to switch between handsfree speakerphone
and normal handset use. Press SPEAKER
again if you are using
speakerphone or place the handset on the deskset to hang up.
Answering a call
Lift the handset, or press the corresponding line key (LINE 1-LINE 4),
SPEAKER
or HEADSET on the deskset to answer an incoming call.
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer of the
deskset without disconnecting the call. Press MUTE to silence the ringer. The
next call rings normally at the preset volume.
26
Telephone operation
Options while on calls
Call waiting
If you subscribe to call waiting service with your telephone service provider, you
hear a beep if someone calls while you are in the middle of a call.
• Press FLASH to put your current call on hold and
take the new call.
• Press FLASH at any time to switch back and forth
between calls.
Volume control
Use this feature to independently set the listening volume to one of six
levels for each of the listening options (corded handset, corded headset and
speakerphone).
All settings are independent. While on a call, press +/VOL/- to adjust the
listening volume.
Mute
Use this feature during a telephone conversation to silence the microphone. You
can hear the caller, but the caller cannot hear you.
To mute a call:
• Press MUTE. When mute is on, the MUTE lights up;
the screen also displays -Mute.
To take a call off mute:
• Press MUTE again and resume speaking.
Temporary tone dialing
If you have pulse (rotary) service only, use this feature to temporarily switch
pulse to touch-tone dialing during a call by pressing TONE .
1. Press TONE during a call.
2. Use the dialing keys to enter the desired number. The telephone sends
touch-tone signals.
The telephone automatically returns to pulse dialing mode after you end
the call.
27
Telephone operation
Options while on calls
Hold
Use this feature to hold one line while accessing another, or as part of the
conference and call transfer features.
While on a call, press HOLD. The corresponding line
key (LINE 1-LINE 4) indicator for the line on hold
flashes slowly. After the call has been put on hold for
more than three minutes, you hear a double beep
every 30 seconds. (To adjust the volume or turn off
the reminder beep, see Hold reminder on page 22).
If you are using the speakerphone, the speakerphone turns off and the
SPEAKER
key turns off automatically after you press HOLD. If you are
using the corded headset, the headset turns off and the HEADSET key turns
off automatically after you press HOLD.
To release the hold, press line key (LINE 1-LINE 4) of the line being put
on hold.
Music on hold (M.O.H) feature is available. When you put a call on hold, the
caller will hear the music that comes with the telephone system. To change the
setting and for more details, refer to the Music on hold section in the user’s
manual of CM18445 console.
NOTES:
•
The call privacy setting remains unchanged after the call is put on hold.
•
The call ends automatically after it is put on hold for 15 minutes.
Switching between lines
Use this feature to switch between lines during an outside call:
1. Press the desired line key (LINE 1-LINE 4) of another telephone line to
make or answer another call. The current call is put on hold automatically.
2. To return to the first call, press the line key (LINE 1-LINE 4) of the original
call. The second line is put on hold automatically.
NOTE: Source of music files: FreeMusicArchive.org. Used under open license.
28
Telephone operation
Options while on calls
Call privacy
During a call, you can temporarily change the call privacy setting to allow or
disallow other extensions to join the call. The original setting is automatically
restored after you hang up.
To turn call privacy off during a call:
1. During the call, press MENU/SELECT.
2. Press or to scroll to Private, then press MENU/SELECT or /SKIP.
Other extensions can now join the call by pressing the corresponding line key
(LINE 1-LINE 4).
To turn call privacy back on during a call:
1. During the call, press MENU/SELECT.
2. Press or to scroll to Private, then press MENU/SELECT or /SKIP. The
deskset displays -Priv.
No extension can join the call now. If another extension tries to access the line
you are using, it displays Private call.
NOTE: To set call privacy for every incoming and outgoing call, see page 22.
29
Telephone operation
Options while on calls
Recording a call
Use this feature to record a phone conversation during a call. The recording is
treated the same as memos and is marked as a new message in the private
mailbox. Listen to recorded conversation the same way as incoming messages
or memos (see Message playback on page 63).
To record a call:
1. During a call, press MENU/SELECT.
2. Press MENU/SELECT or /SKIP to start recording.
3. The recording starts and the screen shows -Rec. There is a beep sound.
NOTE: To ensure that you are in compliance with any federal or state regulations regarding
recording a telephone call, you should start the recording process and then inform the other
party that you are recording the call.
To stop recording:
Place the handset back to the deskset, or press SPEAKER
to hang up if you
are using the speakerphone.
-OR1. Press MENU/SELECT during the recording.
2. Press MENU/SELECT or /SKIP to stop recording. The system saves the
conversation into the private mailbox.
30
Telephone operation
Options while on calls
Chain dialing
While you are on a call, you can initiate a dialing sequence from the numbers in
the directory, caller ID history or redial list.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, caller ID history or redial
list.
To access the directory while on a call:
1. Press /DIR, then press or to scroll to the desired entry.
2. Press MENU/SELECT to dial the desired entry. To exit without making
changes, press CANCEL and continue with the conversation.
To access the call history while on a call:
1. Press /CID, then press or to scroll to the desired entry.
2. Press MENU/SELECT to dial the desired entry. To exit without making
changes, press CANCEL and continue with the conversation.
To access the redial list while on a call:
1. Press AUTO REDIAL, then press or to scroll to the desired entry.
2. Press MENU/SELECT to dial the desired number. To exit without making
changes, press CANCEL and continue with the conversation.
31
Telephone operation
Redial
The last 10 telephone numbers dialed (up to 32 digits) are stored in your deskset.
To view the 10 most recently dialed numbers
1. Press AUTO REDIAL to enter the redial list and display the most recently
called number.
2. Press or to view other recently called numbers.
3. Press CANCEL to exit the redial list.
To redial a number
When the desired number displays on the screen:
• Lift the handset.
-OR• Press SPEAKER
or HEADSET.
To override automatic line selection, press LINE 1-LINE 4 for the desired line,
then lift the handset.
To copy a redial entry to directory
1. Press AUTO REDIAL to enter the redial list and display the most recently
called number.
2. Press or to view other recently called numbers.
3. Press /REPEAT or /SKIP to choose Add to DIR, then press MENU/SELECT.
4. Press MENU/SELECT to save. The deskset displays Edit number. Use the
dialing keys to edit the number (up to 32 digits).
• Press DELETE to delete a digit.
• Press and hold DELETE to delete all digits.
• Press /REPEAT or /SKIP to move the cursor to the left or right.
• Press or to move the cursor to the beginning or end.
• You can store the flash signal required by some special services as part of a
dialing sequence. Press Flash, then an F appears on the screen.
5. Press MENU/SELECT to save. The deskset displays Enter name. Use the
dialing keys to enter the name (up to 24 characters).
• Press DELETE to delete a character.
• Press and hold DELETE to delete all characters.
• Press /REPEAT or /SKIP to move the cursor to the left or right.
• Press or to move the cursor to the beginning or end.
• Press 0 to add a space.
6. Press MENU/SELECT to save. To exit without making changes, press Cancel to
return to the previous menu.
32
Telephone operation
Redial
To delete a number
While the screen displays the desired number, press DELETE to delete the
number from the redial memory. You hear a confirmation tone.
Auto-redial
Use this feature to automatically redial a number twice, with a 30 seconds
countdown in between the two dials.
1. Press AUTO REDIAL to enter the redial list and display the most recently
called number.
2. Press or to view other recently called numbers.
3. While the screen displays the desired number, press /REPEAT or /SKIP to
choose Auto redial, then press MENU/SELECT.
4. Lift the handset, or press the corresponding line key (LINE 1-LINE 4),
SPEAKER
or HEADSET on the deskset to dial the displayed number.
33
Telephone operation
Conference call
The system can support 6-party conference with a maximum of four outside
calls and two system extensions (including the initiating party).
Establish a conference call
There are two ways to establish a conference call.
A. Hold an intercom call
After establishing an intercom call with another system extension, the initiating
party holds the intercom call and invites an external party to join the conference
by making an outside call.
1. Press INTERCOM. Press or to scroll to the desired extension, then
press MENU/SELECT or /SKIP. The called extension picks up the intercom
call.
-ORPress the speed dial key assigned with the desired extension number. The
called extension picks up the intercom call.
2. Press another available line key to make an outside call. The original
intercom call is put on hold. When the external party picks up, you can have
a private conversation with that party.
3. Press CONFERENCE at any time to begin the conference call.
4. If necessary, repeat step 2 and step 3 above to invite another external party
to join the conference until the maximum capacity is reached.
B. Hold an outside call or join a call in progress
The party who initiates the conference invites another system extension to join
the conference by using intercom after establishing the first outside call. Any
system extension can join also a call in progress by pressing the line key which
is currently in use to set up a conference.
1. Make or answer an outside call.
2. Press another available line key to make another outside call. The original
outside call is put on hold. When the external party picks up, you can have a
private conversation with that party.
-ORPress INTERCOM. The outside call is put on hold. Press or to scroll
to the desired extension, then press MENU/SELECT or /SKIP. The called
extension picks up the intercom call.
-ORAny system extension can press the line key currently in use to create a
conference with the console and the external party.
• If the call privacy of your deskset is set to On, follow the instructions of
To turn call privacy off during a call on page 29 to turn off the setting
temporarily.
34
Telephone operation
Conference call
3. Press CONFERENCE at any time to begin the conference call.
4. If necessary, repeat step 2 (make another outside call) and step 3 to invite
another external party to join the conference until the maximum capacity is
reached.
NOTES:
•
After a conference call is established, other extensions are not allowed to join the conference in
progress.
•
The flash signal in a dialing sequence is not available during a conference call.
•
The system does not support an internal conference of more than two system extensions.
Options during a conference call
To talk privately with one external party:
1. Press LINE 1-LINE 4 to talk privately with the person on that line. The
intercom call is automatically placed on hold.
2. Press CONFERENCE to resume the conference call.
To talk privately with one internal party:
1. Press INTERCOM to talk privately with the person on that extension. The
external line(s) is/are automatically placed on hold.
2. Press CONFERENCE to resume the conference call.
To drop an outside line:
1. Press MENU/SELECT.
2. Press MENU/SELECT or /SKIP to select End line.
3. Press or to choose the line number that you want to drop.
4. Press MENU/SELECT or /SKIP to confirm.
To drop an intercom call:
1. Press INTERCOM to activate the intercom call that you want to drop. The
external line(s) is/are automatically placed on hold. Place the corded handset
on the deskset or press SPEAKER .
2. If there is only one external line on hold, press LINE 1-LINE 4 to resume the
external call and lift the corded handset on the deskset. If there is multiple
external lines on hold, press CONFERENCE to resume the conference call.
To end a conference call:
• Place the corded handset on the deskset or press SPEAKER
be ended when all parties hang up.
35
. The call will
Telephone operation
Intercom
You can use the intercom feature for conversations between this deskset and
other system devices.
Make an intercom call to an extension
1. Press INTERCOM on the deskset when it is idle.
2. Press
or
to scroll to a desired extension, then press MENU/SELECT or
/SKIP.
3. The screen displays Calling: XX (XX represents the name and extension
number of destination device).
-ORIf you have assigned extension numbers as speed dial entries (see Assign
a speed dial entry on pages 42-43), you can initiate an intercom by
pressing the desired speed dial key.
1. When the deskset is idle, press the desired speed dial key, or press LOWER
followed by the desired speed dial key.
2. The deskset displays Calling: XX (XX represents the name and extension
number of the destination device).
NOTES:
•
Before the intercom call is answered, you can cancel the intercom by pressing SPEAKER
•
You cannot intercom an extension that is on an intercom call.
Answer an intercom call
When you receive an intercom call, you hear a ringing tone and your screen
displays ---Intercom--- XX (XX represents the name and extension number of
the calling device). Lift the handset or press SPEAKER
to answer.
End an intercom call
Place the handset back to the deskset or press SPEAKER
the speakerphone.
if you are using
Answer an incoming call during an intercom call
If you receive an incoming outside call during an intercom call, there is an
alert tone.
To answer the call, press the corresponding line key (LINE 1-LINE 4). The
intercom call is put on hold automatically.
NOTE: The intercom call ends when the extension device being put on hold answers an
outside call.
36
Telephone operation
Intercom
Hold an intercom call
During an intercom call, press HOLD.
After the call has been put on hold for more than three minutes, a double beep
sounds every 30 seconds. To turn off the reminder beep, see Hold reminder
on page 22.
The far end of the held intercom call will hear the music that comes with the
telephone system. To change the setting and for more details, refer to the
Music on hold section in the user’s manual of CM18445 console.
NOTES:
•
The intercom call ends when the extension device being put on hold makes or answers an
outside call.
•
The intercom call on hold is dropped after 15 minutes.
Handle an intercom call by the private mailbox
When the deskset receives an intercom call and there is no answer after the
programmed number of rings (see Number of rings on page 57), the caller
is prompted to leave a message in the private mailbox.
37
Telephone operation
Call transfer
You can transfer a call to any other system telephone. Only the recipient
extension can answer the transferred call.
Blind transfer
While on a call, you can transfer a call directly without notifying the
desired extension:
1. Press TRANSFER on the deskset while on a call.
The call is put on hold.
2. Press or to scroll to the desired extension,
then press MENU/SELECT or /SKIP.
3. The destination device rings. Choose either
option below.
• Answer the call by lifting the corded handset, or
pressing SPEAKER .
• You can resume the call by pressing the corresponding flashing line key
(LINE 1-LINE 4) on the deskset before the destination device answers the
call.
4. Put the corded handset on the deskset or press SPEAKER
to hang up.
NOTES:
•
If the private mailbox of the destination extension is off, the transferred call will only ring on the
destination extension for five times. If the destination extension does not answer within that period, the
transferred call rings back the deskset. If the deskset does not answer the call. the call ends after it has
been in the transfer process for 10 minutes.
•
If the private mailbox of the destination extension is busy, the call ends.
38
Telephone operation
Call transfer using intercom
Transfer a call and speak to the receiving party
You can transfer a call and speak to the receiving party before completing the
transfer while on a call:
1. Press INTERCOM on the deskset while on a call.
2. Press
or
to scroll to a desired extension, then press MENU/SELECT or
/SKIP. The outside call is put on hold.
3. The destination extension rings and the call is answered by lifting the
handset or pressing SPEAKER . You can now talk to the destination party
privately.
4. Press TRANSFER to transfer the call to the destination extension. The
deskset returns to idle.
39
Telephone operation
Paging
You can directly broadcast your voice to the speakerphone of the console, any
deskset and handset. The extension(s) you called can respond by pressing the
PAGE key to begin a two-way communication.
Make a paging call to an extension
1. Press PAGE on the deskset when it is idle.
2. Press
or
to scroll to a desired extension, then press MENU/SELECT
or /SKIP. The screen displays Paging..., then Press and hold [PAGE] to
talk.
3. Press and hold the PAGE key until the deskset displays Paging...
4. Speak towards the deskset while continuing to hold down the PAGE key.
Your voice is broadcast to the desired extension.
5. Release the PAGE key after speaking. The destination party can reply.
•
•
NOTES:
Before the paging call is answered, you can cancel the paging by pressing CANCEL.
You cannot page an extension that is on a call.
•
If all four telephone lines are in use, the paging feature is not available.
Set and edit a group for paging call
Use the group setting if you want to broadcast your voice to a group of
extensions. When you page a group, only the selected extensions hear your
voice. You can create up to three paging groups.
Press PAGE on the deskset when it is idle.
Press
or
to scroll to Group, press MENU/SELECT or /SKIP.
Press
or
to scroll to Define groups, press MENU/SELECT or /SKIP.
Press
or
to scroll to a desired group, press MENU/SELECT or /SKIP.
The registered extensions (apart from cordless headset and speakerphone)
display. Use the dial pad to press an extension number if you want to add it
to the group.
• To remove an extension number, press the same number again.
6. Press MENU/SELECT or /SKIP to save the setting and return to the previous
menu. To exit without making changes, press CANCEL or /REPEAT.
1.
2.
3.
4.
5.
NOTE: Each group can contain a maximum of four other system extensions.
40
Telephone operation
Paging
Make a paging call to multiple extensions
1. Press PAGE on the deskset when it is idle.
2. Press
or
to scroll to Group or All, press MENU/SELECT or /SKIP.
• If you choose Group, press or to scroll to a desired group of
extensions. Then, press MENU/SELECT or /SKIP.
The screen displays Paging..., then Press and hold [PAGE] to talk.
3. Press and hold the PAGE key until the deskset displays Paging...
4. Speak towards the deskset speakerphone while continuing to hold down the
PAGE key. Your voice is broadcast to the desired extension.
5. Release the PAGE key after speaking. Any destination party can reply.
•
NOTES:
Paging all extensions will create a paging call that only involves the console and the first other four
system devices.
•
If any of the console and the first other four system devices is busy, it will not receive the paging call.
End a paging call
Press CANCEL to end the paging call.
Delete the group settings
1.
2.
3.
4.
5.
Press PAGE on the deskset when it is idle.
Press
or
to scroll to Group, press MENU/SELECT or /SKIP.
Press
or
to scroll to Clear groups, press MENU/SELECT or /SKIP.
Press
or
to scroll to Yes or No.
Press MENU/SELECT or /SKIP to confirm your choice. To exit without making
changes, press CANCEL or /REPEAT.
41
Telephone operation
Speed dial
This deskset has 32 speed dial locations where you
can store the phone numbers or system extension
numbers you wish to dial using fewer keys than usual.
You can store up to 32 digits in each location.
You can access the first 16 locations using only
the speed dial keys. To access the remaining 16
locations, press LOWER and then the speed dial key
for the desired location. You might wish to write the
names, telephone numbers, or extension numbers of
the speed dial entries on the directory card, using the
light gray spaces for the upper 16 locations and the
white spaces for the lower 16 locations.
NOTE: By default, pressing speed dial keys 1 to 10 will make an intercom call to the corresponding
registered extension, as shown on the directory card.
Assign a speed dial entry
Use the following steps to program the speed dial keys.
To copy entry from directory or select an extension:
1. When the deskset is idle, press MENU/SELECT.
2. Press or to scroll to Speed dial, then press MENU/SELECT or /SKIP.
3. Press the desired speed dial key, or press LOWER followed by the desired
speed dial key.
4. Press MENU/SELECT or /SKIP.
5. Press or to choose Add from DIR or Call extension, then press
MENU/SELECT or /SKIP.
6. Press or to choose a desired entry.
7. Press MENU/SELECT to save the setting. To exit without making changes,
press CANCEL or /REPEAT.
42
Telephone operation
Speed dial
Assign a speed dial entry (continued)
To add a new phone number:
1. When the deskset is idle, press MENU/SELECT.
2. Press or to scroll to Speed dial, then press MENU/SELECT or /SKIP.
3. Press the desired speed dial key, or press LOWER followed by the desired
speed dial key. Press MENU/SELECT or /SKIP.
4. Press MENU/SELECT or /SKIP again to choose Enter number.
5. Use the dialing keys to enter the number (up to 32 digits).
• Press DELETE to delete a digit.
• Press and hold DELETE to delete all digits.
• Press /REPEAT or /SKIP to move the cursor to the left or right.
• Press or to move the cursor to the beginning or end.
• You can store the flash signal required by some special services as part of a
dialing sequence. Press Flash, then an F appears on the screen.
6. Press MENU/SELECT to save. The deskset displays Enter name. Use the
dialing keys to enter the name (up to 24 characters).
• Press DELETE to delete a character.
• Press and hold DELETE to delete all characters.
• Press /REPEAT or /SKIP to move the cursor to the left or right.
• Press or to move the cursor to the beginning or end.
• Press 0 to add a space.
7. Press MENU/SELECT to save. To exit without making changes, press Cancel to
return to the previous menu.
NOTES:
•
The newly added phone number will also be saved to the directory.
•
If you want to edit the phone number of the speed dial entry, you need to edit it in directory.
Dial a speed dial entry
When the deskset is idle, press the desired speed dial key for the destination
party in the upper location.
-ORWhen the deskset is idle, press LOWER, then press the speed dial key for the
destination party in the lower location.
The deskset dials the speed dial number using the speakerphone.
43
Telephone operation
Speed dial
Delete a speed dial entry
1. When the deskset is idle, press MENU/SELECT.
2. Press or to scroll to Speed dial, then press MENU/SELECT or /SKIP.
3. Press the desired speed dial key, or press LOWER followed by the desired
speed dial key.
4. Press DELETE to remove the speed dial entry. To exit without making changes,
press CANCEL or /REPEAT.
NOTE: If you delete the speed dial entry for keys 1 to 10, it will reset to the default setting and serve
as an intercom key to the corresponding registered extension.
44
Directory
About the directory
Use the directory to store names and phone numbers. Directory entries are
not shared with other extensions. The console and each deskset have their
own directories.
Capacity
The directory of this deskset can store up to 100 entries, with a maximum of
24 alphanumeric characters (including spaces) for names and 32 digits for
telephone numbers. A convenient search feature can help you quickly find and
dial numbers (page 48).
If there are already 100 entries, the screen shows Directory full when you try
to create a new directory entry. You cannot store a new number until you delete
one. If you try to view the directory when there are no entries, the screen displays
Directory empty.
Exit the directory
On the deskset, press CANCEL to cancel an operation and return to
previous screen.
45
Directory
Create directory entries
Create a new directory entry
Use the following steps to store a name and number in the directory.
1. When the deskset is idle, press MENU/SELECT.
2. Press MENU/SELECT or /SKIP to choose Directory.
3. Press or to scroll to Add contact, then press MENU/SELECT or /SKIP.
4. The screen displays Enter number. Use the dialing keys to enter the
number (up to 32 digits).
• Press DELETE to delete a digit.
• Press and hold DELETE to delete all digits.
• Press /REPEAT or /SKIP to move the cursor to the left or right.
• Press or to move the cursor to the beginning or end.
• You can store the flash signal required by some special services as part of a
dialing sequence. Press Flash, then an F appears on the screen.
5. Press MENU/SELECT to save. The deskset displays Enter name. Use the
dialing keys to enter the name (up to 24 characters). Each time you press
a key, the character on that key appears. When entering a name in the
directory, the first letter of each word is automatically capitalized. Additional
key presses produce other characters on that key. See the table on the next
page.
• Press DELETE to delete a character.
• Press and hold DELETE to delete all characters.
• Press /REPEAT or /SKIP to move the cursor to the left or right.
• Press or to move the cursor to the beginning or end.
• Press 0 to add a space.
46
Directory
Create directory entries
Create a new directory entry (continued)
Characters by number of key presses
Dialing
keys
10
11
’
Space
6. Press MENU/SELECT to save. To exit without making changes, press Cancel to
return to the previous menu.
Review directory entries
1. When the deskset is idle, press /DIR. The screen displays the first entry in
the directory.
2. Press or to browse through the directory. Entries appear in alphabetical
order.
3. Press CANCEL to return to idle mode.
-OR1. When the deskset is idle, press MENU/SELECT.
2. Press MENU/SELECT or /SKIP to choose Directory.
3. Press MENU/SELECT or /SKIP to choose Review. The screen displays the
first entry in the directory.
4. Press or to browse through the directory. Entries appear in alphabetical
order.
5. Press and hold CANCEL to return to idle mode.
47
Directory
Search directory
Search by name
The names appear in alphabetical order. Follow the steps below to search for
directory entries on the deskset.
1. Press /DIR on the deskset. The screen displays the first entry in the
directory.
2. Press or to browse through the directory.
3. Use the dial pad keys (2-9) to enter a letter to start a name search.
• If there is an entry matching the letter you press, the directory shows the
first name beginning with that letter.
• If there is no entry matching the letter you press, the directory shows the
next closest entry or the last entry.
For example, if you have the names Jennifer, Jessie, Kevin and Linda in your
directory:
• If you press 5 (JKL) once, you see Jennifer.
• If you press 5 (JKL) twice, you see Kevin.
• If you press 5 (JKL) three times, you see Linda.
• To view Jessie, press while Jennifer is displayed.
48
Directory
Dial, delete or edit entries
You can dial, delete or edit a directory entry (name and number) when it is
shown on the deskset screen. You can use the directory review (page 47) or
name search (page 48) to show an entry.
Display dial
When a number is displayed on the screen, you can dial the number by lifting the
corded handset, or pressing SPEAKER
or the desired line key (LINE 1-LINE 4).
Delete an entry
When a directory entry appears, press DELETE, then press
confirm.
MENU/SELECT
to
Edit an entry
1. When a directory entry appears, press MENU/SELECT.
2. The screen displays Edit number. Use the dialing keys to edit the number
(up to 32 digits).
• Press DELETE to delete a digit.
• Press and hold DELETE to delete all digits.
• Press /REPEAT or /SKIP to move the cursor to the left or right.
• Press or to move the cursor to the beginning or end.
• You can store the flash signal required by some special services as part of a
dialing sequence. Press Flash, then an F appears on the screen.
3. Press MENU/SELECT to save. The deskset displays Edit name. Use the
dialing keys to edit the name (up to 24 characters).
• Press DELETE to delete a character.
• Press and hold DELETE to delete all characters.
• Press /REPEAT or /SKIP to move the cursor to the left or right.
• Press or to move the cursor to the beginning or end.
• Press 0 to add a space.
4. Press MENU/SELECT to save. To exit without making changes, press
CANCEL.
49
Call history
About the caller ID
This telephone supports caller ID services that most telephone service
providers offer. Caller ID allows you to see the name, number, date and time
of calls. Depending on your service subscription, you might see the caller’s
number, or the caller’s name and number from the telephone service provider
after the first or second ring. Caller ID information might not be available
for every incoming call. Callers may intentionally block their names and/or
telephone numbers.
This product can provide information only if both you and the caller are in areas
offering caller ID service and if both telephone service providers use compatible
equipment.
Information about caller ID with call waiting
Caller ID with call waiting lets you see the name and telephone number of the
caller before answering the telephone, and while on another call. The time and
date, along with the call information, are from the telephone service provider.
It might be necessary to change telephone service to use this feature. Contact
your telephone service provider if:
• You have both caller ID and call waiting, but as
separate services (you might need to combine
CHRISTINE SMITH
these services).
8005959511
11:00pm 12/21 new
• You only have caller ID service, or only call
[SELECT] to add
waiting service.
• You do not subscribe to caller ID or call waiting services.
There are fees for caller ID services. In addition, services may not be available
in all areas.
NOTE: You can use this product with regular caller ID service, or you can use this product’s other
features without subscribing to caller ID or combined caller ID with call waiting service.
50
Call history
Caller ID information
How the caller ID information (call log) works
The telephone stores caller ID information for the last 50 incoming calls in
the deskset. Entries are stored in reverse chronological order. The telephone
deletes the oldest entry when the log is full to make room for new calls.
Each extension has independent caller ID information. Deleting the caller ID
information on any one extension does not affect the caller ID information on
other extensions.
If you answer a call before the information appears on the screen, it does not
show in the caller ID information.
Review the caller ID information to determine who called, to easily return the
call, or to copy the caller’s name and number into your directory.
The time and date of the call and the caller’s name and telephone number are
included in the display.
Caller ID information appears on the screen as the telephone rings, or until the
caller hangs up, or until the call has been answered at another extension, or
until the call ends.
Caller’s name
Caller’s number
Time and date of call
CHRISTINE SMITH
8005959511
11:00pm
12/21 new
[SELECT] to add
Appears when there are
new or missed calls.
If you subscribe to caller ID service, this phone automatically resets the time
and date using the caller ID information from the first incoming call after initial
setup, or each time the power resumes after a power outage.
NOTES:
•
The caller ID information might not be available for every incoming call. Callers might intentionally block
their names and/or telephone numbers.
•
Each entry can store up to 24 digits for the telephone number and 16 characters for the name.
51
Call history
Caller ID operation
Memory match
If the incoming telephone number is an exact match
with a telephone number in your directory, the name that
appears on the screen matches the corresponding name
in your directory.
For example, if Christine Smith calls, her name appears
as Chris if this is how you entered it into your directory.
CHRIS
8005959511
11:00pm
12/21 new
[SELECT] to add
NOTE: The number you see on your caller ID is in the format from the telephone service
provider. It usually delivers 10-digit telephone numbers (area code plus telephone number).
The telephone system ignores the area code when searching for a match and displays the
name of the first corresponding number from the directory.
Missed (new) calls indicator
When there are new or missed calls and you try to review the caller ID log by
pressing /CID, the screen shows XX Missed call(s).
All new or missed entries are counted as missed calls. Each time you review a
call history entry with the icon new, the missed calls message goes away.
Review the caller ID information
1. When the deskset is idle, press /CID. The
deskset displays XX Missed calls.
2. Press or to review the caller ID
information. The caller ID entries are stored in
reverse chronological order starting with the
most recent entry.
3. To exit without making changes, press
CANCEL.
-ORCall History
1. When the deskset is idle, press MENU/SELECT.
XXX Missed calls
Press [DELETE]
2. Press or to scroll to Call history, then press
to delete all
MENU/SELECT or /SKIP. The deskset displays
XX Missed calls.
3. Press or to review the caller ID information. The caller ID entries are
stored in reverse chronological order starting with the most recent entry.
4. To exit without making changes, press CANCEL twice.
52
Call history
Caller ID operation
View dialing options
Although the incoming call history entries
have 10 digits (the area code plus the
CHRIS
seven-digit number), in some areas, you
8005959511
Press #
may need to dial the seven digits only,
11:00pm 12/21 new
1 plus the seven digits, or 1 plus the area
[SELECT] to add
code plus the seven digits. You can change
18005959511
and store the number of digits that you dial
5959511
in the call history.
15959511
8005959511
While reviewing the call history, press
# (pound key) repeatedly on the deskset to show different dialing options for
local and long distance numbers before dialing or saving the telephone number
in the directory.
Dial a call history entry
1. When in the caller ID history, press or to browse the number you wish
to call.
2. Lift the handset or press SPEAKER .
-ORTo override automatic line selection, press the desired line key (LINE 1LINE 4), then lift the handset to call.
53
Call history
Caller ID operation
Save a call history entry to the directory
1. When in the caller ID history, press or to browse to the number you
wish to save.
2. Press MENU/SELECT. The screen displays Edit number. Use the dialing
keys to edit the number (up to 32 digits).
• Press DELETE to delete a digit.
• Press and hold DELETE to delete all digits.
• Press /REPEAT or /SKIP to move the cursor to the left or right.
• Press or to move the cursor to the beginning or end.
• You can store the flash signal required by some special services as part of a
dialing sequence. Press Flash, then an F appears on the screen.
3. Press MENU/SELECT to save. The deskset displays Edit name. Use the
dialing keys to edit the name (up to 24 characters).
• Press DELETE to delete a character.
• Press and hold DELETE to delete all characters.
• Press /REPEAT or /SKIP to move the cursor to the left or right.
• Press or to move the cursor to the beginning or end.
• Press 0 to add a space.
4. Press MENU/SELECT to save. To exit without making changes, press
CANCEL.
NOTE: You will need to change how a caller ID number is dialed if the entry does not appear
in the correct format. Caller ID numbers may appear with an area code that might not be
necessary for local calls, or without a 1 that might be necessary for long distance calls (see
View dialing options on page 53 for more information).
54
Call history
Caller ID operation
Delete entries
To delete a call history entry:
1. When in the caller ID history, press or to browse to the number you
wish to delete.
2. Press DELETE to delete the shown entry from the caller ID history. The
screen displays Deleted.
To delete all call history entries:
1. When the deskset is idle, press /CID.
2. Press DELETE, then press
or
to scroll to Yes or No.
3. Press MENU/SELECT or /SKIP to confirm your choice. To exit without making
changes, press CANCEL or /REPEAT.
55
Call history
Reasons for missing caller ID information
There are also occasions when other information or no information shows for
various reasons:
On-screen message
Reason
Private Number
The caller prefers not to show the phone number.
Private Caller
The caller prefers not to show the phone number
and name.
Unknown Name
Your telephone service provider cannot determine
the caller’s name.
Unknown Number
Your telephone service provider cannot determine
the caller’s number.
Unknown Caller
No information is available about this caller.
56
Answering system
Private mailbox setup
This deskset has a private mailbox that can answer calls and record messages
when the auto attendant of the console and the private mailbox of the deskset
are turned on.
When the auto attendant in the console picks up a call, the caller has to enter
the extension number of this deskset to access the private mailbox. The private
mailbox answers the call after the ring delay time you set in the
Number of rings section below.
Activate private mailbox
There are three different mode of your private mailbox. You can turn it on or off,
or choose Announce only. If you choose Announce only, your deskset plays
an announcement only, and the call is then dropped automatically.
1. When the deskset is idle, press ANS SYS.
2. Press
or
to scroll to Mailbox mode, then press MENU/SELECT or
/SKIP.
3. Press
or
to choose On, Off or Announce only.
4. Press MENU/SELECT or /SKIP to save the setting.
Number of rings
You can set the number of times your deskset rings before the private mailbox
picks up a call.
1. When the deskset is idle, press ANS SYS.
2. Press
or
to scroll to Settings, then press MENU/SELECT or /SKIP.
3. Press
or
to scroll to Mailbox On or Announce only, then press
MENU/SELECT or /SKIP.
4. Press MENU/SELECT or /SKIP to choose No. of rings.
5. Press
or
to choose the desired number of times (2-7) or Toll saver.
• Toll saver - the private mailbox answers a call after two rings when there
are new messages, and after four rings when there are no new messages.
This enables you to check for new messages without paying for a toll call.
6. Press MENU/SELECT or /SKIP to save the setting.
57
Answering system
Private mailbox setup
Announcement
An announcement plays when calls are answered by the private mailbox. The
system has a default announcement, “Extension X is not available to answer
your call right now. Please leave a message after the tone.” (X is the extension
number of your deskset.) You can use this announcement or record your own.
You can record an announcement up to 90 seconds.
To record the announcement:
1. When the deskset is idle, press ANS SYS.
2. Press
or
to scroll to Settings, then press MENU/SELECT or /SKIP.
3. Press
or
to scroll to Mailbox On or Announce only, then press
MENU/SELECT or /SKIP.
4. Press
or
to scroll to Anncment setup, then press MENU/SELECT or
/SKIP.
5. Press
or
to scroll to User anncment, then press MENU/SELECT or
/SKIP.
• If you have recorded your own announcement before, press or to
scroll to Change.
6. Press MENU/SELECT to start recording. Lift the
corded handset or face the deskset to record your
announcement.
7. Press MENU/SELECT again to stop recording. You
hear the playback of the recording.
8. Press
or
to choose OK to save the recording, or choose Change to
record again if desired. Press MENU/SELECT or /SKIP.
To play the recorded announcement:
1. When the deskset is idle, press ANS SYS.
2. Press
or
to scroll to Settings, then press MENU/SELECT or /SKIP.
3. Press
or
to scroll to Mailbox On or Announce only, then press
MENU/SELECT or /SKIP.
4. Press
or
to scroll to Anncment setup, then press MENU/SELECT
or /SKIP.
5. Press
or
to scroll to User anncment, then press MENU/SELECT
or /SKIP. The current announcement plays.
58
Answering system
Private mailbox setup
To reset the announcement:
1. When the deskset is idle, press ANS SYS.
2. Press
or
to scroll to Settings, then press MENU/SELECT or /SKIP.
3. Press
or
to scroll to Mailbox On or Announce only, then press
MENU/SELECT or /SKIP.
4. Press
or
to scroll to Anncment setup, then press MENU/SELECT or
/SKIP.
5. Press MENU/SELECT or /SKIP to choose Default. The default
announcement plays.
6. Press MENU/SELECT or /SKIP to save the setting.
Remote access code
Use this code to select a three-digit number to allow remote access of the
answering system from another telephone. You can change the code to any
number from 000-999. This code is 000 by default.
1. When the deskset is idle, press ANS SYS.
2. Press
or
to scroll to Settings, then press
MENU/SELECT or /SKIP.
3. Press MENU/SELECT or /SKIP to choose
Remote access.
4. Use the dialing keys to enter a three-digit remote code.
• Press DELETE to delete a digit.
• Press /REPEAT or /SKIP to move the cursor to the left or right.
5. Press MENU/SELECT to save the setting and return to the previous menu.
To exit without making changes, press CANCEL.
59
Answering system
Private mailbox setup
Message Length
Use this feature to set the maximum length of each recorded message. The
caller can record a message up to that specific time period.
1. When the deskset is idle, press ANS SYS.
2. Press
or
to scroll to Settings, then press MENU/SELECT or /SKIP.
3. Press
or
to scroll to Message length, then press MENU/SELECT or
/SKIP.
4. Press
or
to choose 1 minute, 2 minutes or 3 minutes.
5. Press MENU/SELECT or /SKIP to save the setting and return to the
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
Call screening
Use this feature to choose whether incoming messages can be heard over the
speaker when they are being recorded. This feature is set to On by default. You
hear the incoming message on your deskset when a call comes in.
1. When the deskset is idle, press ANS SYS.
2. Press
or
to scroll to Settings, then press MENU/SELECT or /SKIP.
3. Press
or
to scroll to Call screening, then press MENU/SELECT or
/SKIP.
4. Press
or
to choose On or Off.
5. Press MENU/SELECT or /SKIP to save the setting and return to the
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
60
Answering system
Private mailbox setup
Call intercept
When a caller is leaving a message on your private mailbox, you can stop the
recording and talk to the caller by pressing the corresponding line key (LINE 1LINE 4). Choose whether private incoming messages can be intercepted by the
deskset during recording.
1. When the deskset is idle, press ANS SYS.
2. Press
or
to scroll to Settings, then press MENU/SELECT or /SKIP.
3. Press
or
to scroll to Call intercept, then press MENU/SELECT or
/SKIP.
4. Press
or
to choose On or Off.
5. Press MENU/SELECT or /SKIP to save the setting and return to the
previous menu. To exit without making changes, press CANCEL.
Message alert
Use this feature to turn the audible message alert on or off.
If the message alert tone is on, the deskset beeps every 10 seconds when
there are new messages in the private mailbox.
1. When the deskset is idle, press ANS SYS.
2. Press
or
to scroll to Settings, then press MENU/SELECT or /SKIP.
3. Press
or
to scroll to Msg alert tone, then press MENU/SELECT or
/SKIP.
4. Press
or
to choose On or Off.
5. Press MENU/SELECT or /SKIP to save the setting and return to the
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
61
Answering system
Private mailbox setup
Remaining time
The maximum recording time of the deskset is 15 minutes. You can record
up to 99 messages in the deskset. Use this feature to check the remaining
recording time and message capacity in the system.
1. When the deskset is idle, press ANS SYS.
2. Press
or
to scroll to Remaining time, then press MENU/SELECT or
/SKIP. The remaining time and message capacity display.
3. Press CANCEL or /REPEAT to return to the previous menu.
62
Answering system
Answering system operation
New message indication
The deskset displays XX New messages when there are new messages
and/or memos in the private mailbox.
The MESSAGE WAITING indicator on the deskset turns on when there are
new messages in private mailbox.
Call screening
When the answering system and call screening are turned on (see
Call screening on page 60), and a message is being recorded, press
MENU/SELECT to hear the incoming message.
During message recording, press +/VOL/- to adjust the volume.
Call intercept
When a caller is leaving a message on your private mailbox, you can stop the
recording and talk to the caller by pressing the corresponding line key (LINE 1LINE 4). You can turn this feature on or off. See Call intercept on page 61.
Message playback
From the deskset, you can play the messages in the private mailbox and the general
mailbox. You can choose to play the new messages only or play old messages.
When playback begins, the total number of messages is announced. Before each
message, you hear the date and time of the recording. After the last message,
you hear “End of the messages.”
NOTE: Messages in general mailbox are stored in console.
To listen to messages in the private mailbox:
1. While the deskset is idle, press ANS SYS.
2. Press MENU/SELECT or /SKIP to choose Play messages.
3. If you have only new messages or only old messages, the deskset plays the
messages directly.
-ORIf you have both new and old messages, press
or
to choose New
messages to play the new messages only, or Old messages to play old
messages in the private mailbox. Press MENU/SELECT or /SKIP to play
the messages.
63
Answering system
Answering system operation
To listen to messages in the general mailbox:
1. While the deskset is idle, press ANS SYS.
2. Press
or
to scroll to Gen MB, then press MENU/SELECT or /SKIP.
3. Press MENU/SELECT or /SKIP to choose Play messages.
4. If you have only new messages or only old messages, the deskset plays the
messages directly.
-ORIf you have both new and old messages, press
or
to choose New
messages to play the new messages only, or Old messages to play old
messages in the general mailbox. Press MENU/SELECT or /SKIP to play
the messages.
Options during playback
When a message is playing, you can adjust the playback volume, skip, repeat,
delete the message, or switch between speakerphone and handset earpiece.
When a message is playing on the deskset:
• Press +/VOL/- to adjust the message playback volume.
• Press /SKIP after the date and time announcement to skip to the
next message.
• Press /REPEAT to repeat the current message. Immediately press
/REPEAT after the date and time announcement to hear the previous
message.
• Press DELETE after the date and time announcement to delete the message. The
system announces “Message deleted.”
• Lift the handset to listen to the message playback through the handset
earpiece. Press SPEAKER
to switch back to speakerphone.
Transfer messages
When a message in the deskset mailbox is playing, you can transfer the
message to a desired extension.
1. Press TRANSFER on the deskset while the deskset is playing a message.
2. Press
or
to scroll to a desired extension, then press MENU/SELECT or
/SKIP. The deskset displays Message transferred to extension X and
announces, “Message transferred to extension mailbox X.”
64
Answering system
Answering system operation
Delete all mailbox messages
You can use delete all messages stored in the private mailbox or stored in the
general mailbox.
To delete all messages in the private mailbox:
1. When the deskset is idle, press ANS SYS.
2. Press
or
to scroll to Delete all old, then press MENU/SELECT or
/SKIP.
3. The screen displays Delete all old messages? Press MENU/SELECT or
/SKIP to confirm. The screen displays All old msgs deleted.
To delete all messages in the general mailbox:
1. When the deskset is idle, press ANS SYS.
2. Press
or
to scroll to Gen MB, then press MENU/SELECT or /SKIP.
3. Press
or
to scroll to Delete all old, then press MENU/SELECT
or /SKIP.
4. The screen displays Delete all old messages? Press MENU/SELECT or
/SKIP to confirm. The screen displays All old msgs deleted.
Record memo
Memos are messages you record into the deskset mailbox. You can save,
play back, and delete them like incoming messages. You can record a memo
as a reminder to yourself, or send a message to other extensions using the
answering system.
1. When the deskset is idle, press ANS SYS.
2. Press
or
to scroll to Record Memo, then press MENU/SELECT or
/SKIP.
3. Press
or
to scroll to a desired extension, then press MENU/SELECT or
/SKIP.
4. Press MENU/SELECT to start recording. Lift the corded handset or face the
deskset to record your memo.
5. Press MENU/SELECT again to stop recording. You hear the playback of the
recording.
6. Press
or
to choose OK to save the recording, or choose Change to
record again if desired. Press MENU/SELECT or /SKIP.
65
Answering system
Remote access
Use this feature to reach your answering system remotely by calling any
telephone line connected this deskset from any touch-tone telephone. Make
sure the auto attendant feature of your CM18445 console, and the private
mailbox of the extension are turned on for this feature to work. Remote access
can only play messages stored in the private mailbox.
To remotely reach the answering system:
1. Dial any telephone line connected to the console from any
touch-tone telephone.
2. When the system answers, enter the extension number.
3. Once the private mailbox of the extension answers, enter the three-digit
remote access code (000 is the default code; see Remote access code on
page 59 to change it).
4. Enter the following remote commands.
Remote commands:
Press to play all messages.
Press to delete all old messages.
Press to delete the current message (during playback).
Press to repeat the current message (during playback).
Within 5 seconds of message playback, press 4 again to listen
to the previous message (during playback).
Press to stop and return to the remote commands (during
playback).
Press to skip to the next message (during playback).
Press to transfer the current message (during playback).
Press to end the call.
5. Hang up to end the call.
NOTES:
•
If you do not enter the valid remote access code after you enter the answering system successfully, the
answering system starts to record the message after the tone.
•
When there is no new message or all the new messages are played during remote access, you hear
a help menu listing all features and commands. If there is no command after the help menu is played
three times, the call ends automatically.
66
Appendix
Deregister a deskset
You may need to deregister the deskset from the console if you already have
nine registered devices and need to replace a deskset, or if you wish to change
the assigned number of your registered devices.
You must first deregister the desired device(s), and then register the device(s)
individually.
NOTES:
•
Make sure the deskset is not in use before deregistration.
•
After deregistration, you cannot use the deskset unless you register it to the console again.
•
All messages in the private mailbox of your deskset will be removed after deregistration.
To deregister a deskset from the CM18445 console:
1. On the console, press MENU/SELECT.
2. Press or to scroll to Registration, then press
MENU/SELECT or /SKIP.
3. Press or to scroll to Deregistration, then press
MENU/SELECT or /SKIP.
4. Press or to scroll to a desired device, then press
MENU/SELECT or /SKIP.
5. Press or to scroll to Yes, then press
MENU/SELECT or /SKIP. The console shows
Deregistering DESKSET X (X represents the
extension number).
6. You hear a beep sound when the deregistration
process is successful. It takes up to 10 seconds to
complete the deregistration process.
NOTE: To register the deskset again, refer to the registration
information on page 8.
Registration:
Register ext
>Deregistration
Deregistration:
DESKSET
HANDSET
DESKSET
>DESKSET
HANDSET
DESKSET
Deregister
DESKSET X?
>Yes
No
67
Appendix
Deskset display screen messages
All calls
deleted.
All Caller ID histories are deleted.
All group
settings clear.
All group settings for paging call are cleared.
All old msgs
deleted.
All messages in the private mailbox are
deleted.
Call history
empty
There are no entries in the caller ID history.
Calling:
The deskset is making an intercom call.
Conf.
The deskset is in a conference call.
Contact saved
A number is saved to the directory.
Deleted
A Caller ID history is deleted.
Directory empty
There are no directory entries.
Directory full
The directory is full. You cannot save new
entries unless you delete some current
entries.
Ended
You have just ended a call.
Extension busy
The destination extension is on an intercom
call.
Intercom
The deskset is on an intercom call.
---Intercom---
There is an intercom call coming in.
Intercom in use
The deskset is holding an intercom call and
cannot barge-in a line.
Line in conf.
You cannot barge-in a conference call.
68
Appendix
Deskset display screen messages
Line user’s
intercom in use
The extension on the desired line is holding
an intercom. You cannot barge-in it at the
moment.
Line X
The telephone line X is in use.
---Line X--Incoming call
There is an incoming call from line X.
Line X
transferred to
The deskset is transferring a call to a
system extension.
Memory full
The private mailbox of the designated
extension is full.
Message
transferred to
extension X
A message is transferred from private mailbox
of deskset to mailbox of extension X.
Number already
saved
The telephone number you have entered is
already stored in the directory.
Paging...
A paging call is established to other system
extensions.
Private call
Call privacy is turned on on the line your are
trying to reach.
Redial empty
The redial list is empty.
Reset deskset...
The deskset telephone settings are reset to
default settings.
XX Missed calls
There are new calls in the caller ID history.
XX New messages
There are new messages in the private
mailbox.
69
Appendix
Troubleshooting
If you have difficulty with your telephone, please try the suggestions below.
For customer service, visit our website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, dial 1 (800) 267-7377.
Use only
Supplied
Adapter
L2
L3/4
L4
Use only
Supplied
Adapter
5.1
Use only
Supplied
Adapter
There is no dial tone.
• First try all the suggestions above.
• Make sure you plug the handset cord securely and firmly into the jack on
the deskset and the corded handset.
MS2015
• Engraving:
Make sure a line is selected. Press a line key or SPEAKER .
• If there is no dial tone when you press HEADSET, make sure the corded
headset is firmly connected to the
jack.
L1/2
My deskset doesn’t work at all.
• Make sure the power cord is securely plugged in.
• Refer to Deskset installation on pages 4-5 to reset the system. Allow at least
one minute for the deskset to reset.
• This system is not compatible with any other VTech 4 line business
telephones, except for the CM18445 console.
5.1
Use only
Supplied
Adapter
L4
L3/4
L2
MS2085 Engraving:
MS2015 Engraving:
I cannot dial out.
• First try all the suggestions above.
• Make sure you have a dial tone before dialing. The corded handset might
take a second or two to connect the deskset and produce a dial tone. This is
normal. Wait an extra second before dialing.
• If the other telephones in your building are having the same problem, contact
your telephone service provider.
MS2085 Engraving:
L1/2
I cannot make intercom calls.
• Make sure you choose the correct extension.
• The destination telephone might be on a conference call or an intercom call.
Wait and try again.
I cannot transfer outside calls.
• If you are on a conference call with another telephone in the same system,
the call cannot be transferred.
• If the destination telephone is on an outside call or intercom call with another
system telephone, the call cannot be transferred.
70
Appendix
Troubleshooting
I hear a double-beep sound every 30 seconds.
• There is a call on hold at this extension. Press the LINE key of the call on
hold to return to the call and turn off the reminder beep.
The deskset display screen is blank.
• Make sure the power cord is connected to both the deskset and an electrical
outlet not controlled by a wall switch.
• Make sure the backup battery is installed and is charged.
My calls fade in and out while I’m using my corded handset.
• If you have a corded headset plugged into the telephone, try unplugging it
and firmly plugging it in again.
• If you are using the speakerphone when this problem occurs, eliminate any
background noise. Noise from the television, radio, or other appliances might
cause the speakerphone to cut in and out. Try engaging the MUTE button
when you are not speaking or eliminating the background noise.
My deskset does not ring when I receive a call.
• Make sure that the ringer is not off. Refer to Ringer volume on page 18 in this
user’s manual.
• Make sure the power cord or the backup battery is plugged in securely.
• Make sure the system is properly set up. Refer to Deskset installation on
pages 4-5 for details.
• If the other telephones in your building are having the same problem, contact
your telephone service provider.
• Test a working telephone at the telephone jack. If another telephone has the
same problem, contact your telephone service provider.
• The telephone line cords connecting to the console might be defective. Try
installing new line cords.
• Make sure that the Line group assignment is correct. See Line group
section on CM18445 console’s user’s manual for more details.
My caller ID isn’t working.
• Caller ID is a subscription service. You must subscribe to this service
from your telephone service provider for this feature to work on your deskset.
• The caller must be calling from an area that supports caller ID.
• Both your and your caller’s telephone service providers must use caller ID
compatible equipment.
71
Appendix
Troubleshooting
System does not receive caller ID when on a call.
• Make sure you subscribe to caller ID with call waiting features from your
telephone service provider. Caller ID feature works only if both you and the
caller are in areas offering caller ID service, and if both telephone service
providers use compatible equipment.
The outgoing announcement is not clear.
• When recording the announcement, make sure you speak in a normal tone
of voice about nine inches from the deskset.
• Make sure there is no background noise (television, music, traffic, etc.) when
recording.
The private mailbox does not record messages.
• Make sure the auto attendant is turned on at the console.
• Make sure the private mailbox is turned on at the deskset (page 57).
• Make sure the memory of the answering system is not full. Please refer to
the Remaining time on page 62 in the user’s manual. If the memory is
full, the system announces “Memory full” and then hangs up. You need to
delete some old messages in order to make room for new messages.
• If Announce only is selected in the Mailbox mode menu (page 57), the
answering system only plays the outgoing announcement. It does not record
incoming message.
The private mailbox does not answer after the correct delay ring.
• Make sure the auto attendant is turned on at the console.
• Make sure the private mailbox is turned on at the deskset (page 57).
• If all four outgoing telephone lines are in use, the system cannot answer
incoming calls.
The private mailbox is recording incomplete messages.
• If a caller leaves a very long message, part of it may be lost when the
system disconnects the call after the set message length. See Message
Length on page 60 for details.
• If the caller pauses for longer than seven seconds, the system stops
recording and disconnects the call.
• If the system’s memory becomes full during message recording, the system
stops recording and disconnects the call.
• If the caller’s voice is very soft, the system may stop recording and
disconnect the call.
72
Appendix
Troubleshooting
I have difficulty hearing messages.
• Press +/VOL to increase the speaker volume on the deskset.
The answering system does not respond to remote access commands.
• Make sure you are using the correct remote access code (page 59).
• Make sure you are calling from a touch-tone telephone (away from home).
When dialing a number, you should hear tones. If you hear clicks, then it is
not a touch-tone telephone and cannot activate the answering system.
• The answering system might not detect the remote access code when
your announcement is playing. Wait until the announcement is over before
entering the code.
• There might be interference on the telephone line you are using. Press the
dial pad keys firmly when dialing.
Common cure for electronic equipment.
If the deskset does not seem to be responding normally, do the following (in the
order listed):
1. Disconnect the power from the deskset.
2. Wait a few minutes.
3. Connect the power to the deskset.
4. Wait for the deskset to synchronize its connection. This will take at least one
minute to finish.
73
Appendix
Maintenance
Taking care of your telephone
•
•
•
•
Your deskset contains sophisticated electronic parts, so you must treat it with care.
Avoid rough treatment.
Place the corded handset down gently.
Save the original packing materials to protect your deskset if you ever need to ship it.
Avoid water
•
You can damage your deskset if it gets wet. Do not use the corded handset in the rain, or handle
it with wet hands. Do not install the deskset near a sink, bathtub or shower.
Electrical storms
•
Electrical storms can sometimes cause power surges harmful to electronic equipment. For your
own safety, take caution when using electric appliances during storms.
Cleaning your telephone
•
Your deskset has a durable plastic casing that should retain its luster for many years. Clean it
only with a soft cloth slightly dampened with water or a mild soap.
•
Do not use excess water or cleaning solvents of any kind.
Remember that electrical appliances can cause serious injury if used when you are wet or
standing in water. If the deskset should fall into water, DO NOT RETRIEVE IT UNTIL YOU
UNPLUG THE POWER CORD FROM THE WALL, then pull the unit out by the unplugged cords.
74
Appendix
FCC part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by
the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this
equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX.
This identifier must be provided to your telephone service provider upon request.
The plug and jack used to connect this equipment to premises wiring and the telephone network
must comply with the applicable Part 68 rules and technical requirements adopted by ACTA. A
compliant telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be
used for connecting to a single line and an RJ14 jack for two lines. See Installation Instructions in
the user’s manual.
The Ringer Equivalence Number (REN) is used to determine how many devices you may connect
to your telephone line and still have them ring when you are called. The REN for this product is
encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03,
the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more
information, please contact your telephone service provider.
This equipment may not be used with Party Lines. If you have specially wired alarm dialing
equipment connected to telephone line, ensure the connection of this equipment does not disable
your alarm equipment. If you have questions about what will disable the alarm equipment, consult
your telephone service provider or a qualified installer.
If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has
been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its
authorized agents. For repair procedures, follow the instructions outlined under the
Limited Warranty.
If this equipment is causing harm to the telephone network, the telephone service provider may
temporarily discontinue your telephone service. The telephone service provider is required to notify
you before interrupting service. If advance notice is not practical, you will be notified as soon as
possible. You will be given the opportunity to correct the problem and the telephone service provider
is required to inform you of your right to file a complaint with the FCC. Your telephone service
provider may make changes in its facilities, equipment, operation, or procedures that could affect
the proper functioning of this product. The telephone service provider is required to notify you if such
changes are planned.
If this product is equipped with a corded or cordless handset, it is hearing aid compatible.
If this product has memory dialing locations, you may choose to store emergency telephone
numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers,
please:
Remain on the line and briefly explain the reason for the call before hanging up.
Perform such activities in off-peak hours, such as early morning or late evening.
Industry Canada
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Privacy of communications may not be ensured when using this phone.
The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada
technical specifications were met.
The Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The REN is an
indication of the maximum number of devices allowed to be connected to a telephone interface.
The termination on an interface may consist of any combination of devices subject only to the
requirement that the sum of the RENs of all the devices does not exceed five.
This product meets the applicable Industry Canada technical specifications.
75
Appendix
FCC part 15
This equipment has been tested and found to comply with the requirements for a Class B
digital device under Part 15 of the Federal Communications Commission (FCC) rules. These
requirements are intended to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
•
Consult the dealer or an experienced radio/TV technician for help.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Changes or modifications to this equipment not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. Privacy of
communications may not be ensured when using this phone.
To ensure safety of users, the FCC has established criteria for the amount of radio frequency
energy that can be safely absorbed by a user or bystander according to the intended usage of the
product. This product has been tested and found to comply with the FCC criteria. The handset
may be safely held against the ear of the user. The deskset shall be installed and used such that
parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm
(8 inches) or more.
This Class B digital apparatus complies with Canadian requirement:
CAN ICES-3 (B)/NMB-3(B)
WARNING: Changes or modifications to this equipment not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
76
Appendix
California Energy Commission battery charging
testing instructions
This deskset is set up to comply with the energy-conserving standards right
out of box. These instructions are intended for California Energy Commission
(CEC) compliance testing only. When the CEC battery charging testing mode
is activated, all telephone functions, except backup battery charging, will be
disabled.
To activate the CEC battery charging testing mode:
1. On the CM18445 console, press MENU/SELECT.
2. Press
or
to scroll to Registration, then press MENU/SELECT
or /SKIP.
3. Press
or
to scroll to Deregistration, then press MENU/SELECT
or /SKIP.
4. Press
or
to choose this deskset, then press MENU/SELECT or /SKIP.
5. Press
or
to scroll to Yes, then press MENU/SELECT or /SKIP. The
console shows Deregistering DESKSET X (X represents the extension
number).
The process takes up to 10 seconds to complete. When the deskset
successfully enters the CEC battery charging testing mode, its screen displays
1) Press MENU on Console> Registration> Register Ext. and 2) Press # on
this extension to register. alternately. You hear a confirmation tone.
If the deskset fails to enter this mode, repeat all the steps above.
To activate the CEC battery charging testing mode:
Register your deskset back to the CM18445 console. See Add and register a
deskset on page 8 for the instructions.
77
Appendix
For C-UL compliance only
Mesures de sécurité importantes
Ce symbole vous alertera d’informations importantes ou d’instructions d’entretien pouvant
apparaître dans ce guide d’utilisation. Respectez toujours les mesures de sécurité et de
sécurité de base lorsque vous utilisez ce produit, afin de réduire les risques de blessures,
d’incendie, ou d’électrocution.
Information relative à la sécurité
•
•
•
•
•
•
•
•
•
Veuillez lire et comprendre toutes les instructions de ce guide d’utilisation. Relectez toutes les
inscriptions apparaissant sur le produit.
Évitez d’utiliser le téléphone pendant un orage. Il pourrait y avoir un faible risque d’électrocution.
N’utilisez pas un téléphone près d’une fuite de gaz. Dans certaines circonstances, une
flammèche pourrait se produire lorsque l’adaptateur est branché à une prise de courant, ou
lorsque le combiné est déposé sur son chargeur. Ceci est un événement fréquent associé avec
la fermeture d’un circuit électrique. L’utilisateur ne devrait pas brancher un téléphone dans une
prise de courant, et ne devrait pas déposer un combiné chargé dans le chargeur, si le téléphone
se trouve dans un environnement comportant une concentration de gaz inflammables ou
ignifuges, à moins de se trouver dans un endroit où la ventilation est adéquate. Une flammèche
dans de tels environnements pourrait provoquer une explosion. De tels environnements peuvent
comprendre : les endroits où de l’oxygène à des fins médicales est utilisé sans ventilation
adéquate; des endroits où se trouvent des gaz industriels (dissolvants de nettoyage, des vapeurs
de gazoline, etc.), une fuite de gaz naturel, etc.
N’utilisez pas ce produit près de l’eau ou lorsque vous êtes mouillés. Par exemple, ne l’utilisez
pas dans des sous-sols humides ou sous la douche, ou près d’une piscine, d’un bain, d’un
évier de cuisine, ou d’une cuve de lavage. N’utilisez pas de liquides, ou de vaporisateurs
aérosol de nettoyage. Si le produit entre en contact avec du liquide, débranchez immédiatement
le fil téléphonique ou le cordon d’alimentation. Ne rebranchez pas le produit avant qu’il soit
complètement sec.
Évitez d’installer le système téléphonique dans les endroits soumis à une température extrême,
à la lumière directe du soleil ou à proximité immédiate d’autres appareils électriques ou
électroniques. Protégez votre téléphone contre les sources d’humidité, la poussière, les vapeurs
et les liquides corrosifs.
Installez cet appareil dans un endroit protégé où personne ne peut trébucher sur les cordons
d’alimentation ou la ligne téléphonique. Protégez les câbles contre les dommages ou l’abrasion.
Si le produit ne fonctionne pas correctement, consultez la section Dépannage (Troubleshooting) des
pages 70-73 de ce guide d’utilisation. Si vous ne pouvez pas régler le problème, ou si le produit
est endommagé, consultez la section Garantie limitée (Limited warranty) des pages 80-81.
N’ouvrez pas ce produit, sauf tel qu’indiqué dans le guide d’utilisation. L’ouverture du produit ou le
remontage inadéquat pourrait vous exposer à des tensions dangereuses ou autres dangers.
Les adaptateurs secteurs sont conçus pour être orientés verticalement ou installés sur le
plancher. Les broches ne sont pas conçues pour se maintenir en place si la fiche est branchée
dans une prise de courant au plafond, sous la table ou sous une armoire.
Pour les PRODUITS À BRANCHER À UNE PRISE DE COURANT, la prise de courant doit être
installée près du produit, afin d’assurer une accessibilité sécuritaire à la prise de courant.
Mise en garde :
•
•
•
N’utilisez que les adaptateurs inclus avec ce produit. Pour obtenir une pièce de
rechange, visitez notre site Web au www.vtechphones.com ou composez le
1-800-595-9511. Au Canada, composez le 1-800-267-7377.
N’utilisez que la pile de rechargeable incluse ou une pile de rechange. Pour
commander, visitez notre site Web www.vtechphones.com ou composez le
1-800-595-9511. Au Canada, composez le 1-800-267-7377.
Afin de prévenir les risques d’incendie ou d’explosion de la pile, replacez la pile avec
une pile du même type. Jetez les piles épuisées en respectant les instructions.
78
Appendix
For C-UL compliance only
Spécifiquement en rapport avec les téléphones sans fil
•
Alimentation électrique : La base de ce téléphone sans fil doit être branchée à une prise de
courant électrique fonctionnelle. La prise électrique ne doit pas être contrôlée par un interrupteur
mural. Les appels ne peuvent pas être effectués à partir du combiné si la base n’est pas
branchée, si elle est hors fonction ou si le courant électrique est coupé.
•
Adaptateur de courant : L’adaptateur de courant est conçu pour être orienté verticalement ou
installé sur le plancher. Les broches ne sont pas conçues pour se maintenir en place si la fiche
est branchée dans une prise de courant au plafond, sous la table ou sous une armoire.
•
Piles rechargeables : Vous devez recycler ou jeter les piles de manière écologique. Ne pas jeter
dans les rebuts domestiques. Ne pas brûler ni percer les piles. Comme pour les autres piles du
même type, si elles sont brûlées ou percées, des matières corrosives peuvent s’en échapper, ce
qui risque de causer des brûlures ou autres blessures corporelles.
•
Piles rechargeables à l’hydrure métallique de nickel : Jetez ces piles de manière sécuritaire.
N’incinérez pas et ne peercez pas les piles. Comme pour les autres piles du même type, si
elles sont brûlées ou percées, des matières corrosives peuvent s’en échapper, ce qui risque de
causer des brûlures ou autres blessures corporelles.
Le sceau de l’organisme de recyclage RBRCMD sur les piles à l’hydrure
métallique de nickel signifie que le fabricant de cet appareil participe
volontairement au programme industriel visant à reprendre et recycler ce type
de piles lorsqu’elles ne servent plus, au sein du territoire des États-Unis et
du Canada. Vous devez apporter ces piles chez un détaillant participant ou
le centre de recyclage le plus près de chez vous. Ou vous pouvez composer
le 1-800-8BATTERYMD afin de connaître les endroits qui acceptent les piles à
l’hydrure métallique de nickel mortes.
RBRCMD et 1-800-8-BATTERYMD sont des marques déposées de Rechargeable
Battery Recycling Corporation.
Mesures préventives pour les utilisateurs de stimulateurs cardiaques implantés dans l’organisme
Stimulateurs cardiaques (ne s’applique qu’aux téléphones sans fil numériques) :
L’organisme ‘Wireless Technology Research, LLC (WTR)’, une firme de recherche indépendante, a
mené une évaluation pluridisciplinaire des interférences entre les téléphones sans fil portatifs et les
stimulateurs cardiaques implantés dans l’organisme. Appuyée par l’Administration des aliments et
drogues (FDA) des États-unis, la firme WTR recommande aux médecins :
Avis aux détenteurs de stimulateurs cardiaques
•
Ils doivent tenir le téléphone sans fil à une distance d’au moins six pouces du stimulateur
cardiaque.
•
Ils ne doivent PAS placer le téléphone sans fil directement sur le stimulateur cardiaque, tel que
dans une poche de chemise, lorsque celui-ci est en fonction.
•
Ils doivent utiliser le téléphone sans fil en l’appuyant sur l’oreille qui se trouve dans la direction
opposée au stimulateur cardiaque.
L’étude effectuée par l’organisme WRS n’a pas identifié de risque pour les détenteurs de simulateurs
cardiaques causé par les gens qui utilisent un téléphone sans fil à proximité de ceux-ci.
Spécifiquement en rapport avec les répondeurs téléphoniques
Enregistrement deux voies : Cet appareil n’émet pas de bips d’avertissement qui permettent
de prévenir l’autre partie que vous enregistrez la conversation. Pour assurer votre conformité
aux règlements fédéraux ou provinciaux en rapport avec les enregistrements des conversations
téléphoniques, vous devriez informer l’autre partie lorsque vous activez l’enregistrement.
CONSERVEZ CES INSTRUCTIONS
79
Appendix
Limited warranty
1. What does this limited warranty cover?
The manufacturer of this VTech product warrants to the holder of a valid proof of purchase
(“CONSUMER” or “you”) that the product and all accessories provided in the sales package
(“PRODUCT”) are free from defects in material and workmanship, pursuant to the following terms
and conditions, when installed and used normally and in accordance with the PRODUCT operating
instructions. This limited warranty extends only to the CONSUMER for products purchased and used
in the United States of America and Canada.
2. What will be done if the PRODUCT is not free from defects in materials and workmanship
during the limited warranty period (“materially defective PRODUCT”)?
During the limited warranty period, VTech’s authorized service representative will repair or replace
at VTech’s option, without charge, a materially defective PRODUCT. If we repair the PRODUCT, we
may use new or refurbished replacement parts. If we choose to replace the PRODUCT, we may
replace it with a new or refurbished PRODUCT of the same or similar design. We will retain defective
parts, modules, or equipment. Repair or replacement of the PRODUCT, at VTech’s option, is your
exclusive remedy. VTech will return repaired or replacement products to you in working condition.
You should expect the repair or replacement to take approximately 30 days.
3. How long is the limited warranty period?
The limited warranty period for the PRODUCT extends for TWO (2) YEARS from the date of
purchase. If VTech repairs or replaces a materially defective PRODUCT under the terms of this
limited warranty, this limited warranty also applies to repaired or replacement PRODUCT for a period
of either (a) 90 days from the date the repaired or replacement PRODUCT is shipped to you or (b)
the time remaining on the original two-year limited warranty; whichever is longer.
4. What is not covered by this limited warranty?
This limited warranty does not cover:
•
PRODUCT that has been subjected to misuse, accident, shipping or other physical damage,
improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other
liquid intrusion; or
•
PRODUCT that has been damaged due to repair, alteration, or modification by anyone other
than an authorized service representative of VTech; or
•
PRODUCT to the extent that the problem experienced is caused by signal conditions, network
reliability or cable or antenna systems; or
•
•
PRODUCT to the extent that the problem is caused by use with non-VTech accessories; or
•
PRODUCT purchased, used, serviced, or shipped for repair from outside the United States of
America or Canada, or used for commercial or institutional purposes (including but not limited to
products used for rental purposes); or
•
•
PRODUCT returned without a valid proof of purchase (see item 6 below); or
PRODUCT whose warranty/quality stickers, PRODUCT serial number plates or electronic serial
numbers have been removed, altered or rendered illegible; or
Charges for installation or setup, adjustment of customer controls, and installation or repair of
systems outside the unit.
80
Appendix
Limited warranty
5. How do you get warranty service?
To obtain warranty service, visit www.vtechphones.com or call 1 (800) 595-9511. In Canada,
please dial 1 (800) 267-7377.
NOTE: Before calling for service, please review the user’s manual; a check of the PRODUCT’s
controls and features may save you a service call.
Except as provided by applicable law, you assume the risk of loss or damage during transit and
transportation and are responsible for delivery or handling charges incurred in the transport of the
PRODUCT(s) to the service location. VTech will return repaired or replaced PRODUCT under this
limited warranty to you. Transportation, delivery or handling charges are prepaid. VTech assumes
no risk for damage or loss of the PRODUCT in transit. If the PRODUCT failure is not covered by
this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech
will notify you and will request that you authorize the cost of repair prior to any further repair activity.
You must pay for the cost of repair and return shipping costs for the repair of products that are not
covered by this limited warranty.
6. What must you return with the PRODUCT to get warranty service?
You must:
•
Return the entire original package and contents including the PRODUCT to the service location
along with a description of the malfunction or difficulty; and
•
Include a “valid proof of purchase” (sales receipt) identifying the PRODUCT purchased
(PRODUCT model) and the date of purchase or receipt; and
•
Provide your name, complete and correct mailing address, and telephone number.
7. Other limitations
This warranty is the complete and exclusive agreement between you and VTech. It supersedes all
other written or oral communications related to this PRODUCT. VTech provides no other warranties
for this PRODUCT. The warranty exclusively describes all of VTech’s responsibilities regarding the
PRODUCT. There are no other express warranties. No one is authorized to make modifications to
this limited warranty and you should not rely on any such modification.
State/Provincial Law rights: This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state or province to province.
Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability
(an unwritten warranty that the PRODUCT is fit for ordinary use) are limited to one year from date of
purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so
the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special,
incidental, consequential, or similar damages (including, but not limited to lost profits or revenue,
inability to use the PRODUCT or other associated equipment, the cost of substitute equipment,
and claims by third parties) resulting from the use of this PRODUCT. Some states/provinces do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
Please retain your original sales receipt as proof of purchase.
81
Appendix
Technical specifications
RF frequency band
1921.536MHz - 1928.448MHz
Channels
Deskset voltage
100Vrms - 120Vrms
(AC voltage, 50/60Hz)
Deskset voltage
6VDC @ 600mA
(AC adapter output)
Optional backup batteries
2.4V 750mAh Ni-MH battery pack
Headset jack
2.5mm, 32ohm - 150ohm
Operation with backup battery
Operating time*
Talk time (cordless handset)
Up to 7.9 hours
Talk time (cordless handset speakerphone)
Up to 3.8 hours
Standby
Up to 4.5 days
* Operating times vary depending on your actual use and the age of the battery.
82
Index
Add a headset 9
Add a speed dial entry 42–43
Alert tones 17
Announcement 58–59
Answer a call 26
Answer an intercom call 36
Auto-redial 33
FCC, ACTA and IC regulations 75–76
Flash 27
Handsfree use 26
Hold 28
Hold reminder 22
Icons 16
Important safety information i–ii
Indication 17, 25, 63
Blind transfer 38
Caller ID 50–56
Call history 50–56
Call intercept 61, 63
Call privacy 22, 29
Call screening 60, 63
Call transfer 38, 39
Call waiting 27
Cardiac pacemakers ii, 79
Chain dialing 31
Conference call 34–35
Contrast 20
Key tone 20
Language 21
Lights 17
Limited warranty 80–81
Line indicators 25
Listening volume 27
Default setting 23
Delay 57
Deregister a deskset 67
Deskset installation 4–8
Dialing options 53
Directory 45–49
Directory capacity 45
Display dial 49
Do not disturb 19
Mailbox setup 57–62
Maintenance 74
Make a call 25
Make an intercom call 36
Memo 65
Memory match 52
Menu settings 18
Message indication 63
Message playback 63–64
Missed (new) calls indicator 52
Mute 27
End a call 25
End an intercom call 36
Navigation keys 10
New message indication 63
83
Index
On hook dialing (predialing) 26
Operation 25–44
Overview 10–15
Technical specifications 82
Telephone operation 25–44
Temporary tone dialing 27
Transfer a call 38, 39
Troubleshooting 70–73
Two-way recording ii, 79
Pacemaker patients ii, 79
Paging 40–41
Phonebook (directory) 45
Predialing 26
Primary line 21
Privacy 22, 29
Private mailbox 57–62
Volume 18, 27
Volume control 27
Wall mount 6–7
Warranty 80–81
Website 24
Record a call 30
Redial 32–33
Register a deskset 8
Remaining message capacity 62
Remaining time 62
Remote access 59, 66
Rename deskset 23
Review call history 52
Review directory 47
Ringer melody 19
Ringer volume 18
Screen contrast 20
Search by name 48
Search for a contact 48
Set default 23
Settings 18–24
Speakerphone 26
Speed dial 42–44
Switch between lines 28
System setup 18–24
84
Source of music files for the Music on hold feature:
FreeMusicArchive.org. Used under open license.
Designed to fit your home.
And your life.
VTech Communications, Inc.
A member of THE VTECH GROUP OF COMPANIES.
VTech is a registered trademark of VTech Holdings Limited.
Specifications are subject to change without notice.
© 2015 VTech Communications, Inc.
All rights reserved. 03/15. CM18245_CIB_V1.0
Document order number: 91-008470-010-100
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c014 79.156797, 2014/08/20-09:53:02
Instance ID                     : uuid:45b7b34a-c42c-4a6a-9347-3baa8b0d0b40
Original Document ID            : xmp.did:A29DBB1E1948E311ABB38F50F3504EA2
Document ID                     : xmp.id:87484a9c-7cd1-4e4a-bb09-f167a76011cf
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:f86d10e0-5587-d74f-80d7-7a491b5b8840
Derived From Document ID        : xmp.did:9d3b5e1c-e64e-8a4f-b038-8edb597fe399
Derived From Original Document ID: xmp.did:A29DBB1E1948E311ABB38F50F3504EA2
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Windows)
History Changed                 : /
History When                    : 2015:03:16 16:02:42+08:00
Create Date                     : 2015:03:16 16:02:42+08:00
Modify Date                     : 2015:03:16 16:02:59+08:00
Metadata Date                   : 2015:03:16 16:02:59+08:00
Creator Tool                    : Adobe InDesign CC 2014 (Windows)
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 92
Creator                         : Adobe InDesign CC 2014 (Windows)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: EW780-9678-00

Navigation menu