VXI 203100 Bluetooth wireless headset User Manual

VXI Corporation Bluetooth wireless headset

User Manual

Compatible with most Bluetooth phones & Bluetooth enabled computers (Windows® or Macintosh®)USER GUIDE203110A_B250-XT+_UserGuide_08-26-11.indd 1 8/26/2011 4:58:47 PM
203110A_B250-XT+_UserGuide_08-26-11.indd 2 8/26/2011 4:58:47 PM
3TABLE OF CONTENTSVXi BlueParrott® B250-XT+ User Guide 34 Package Contents5 Safety Instructions/ Glossary6 Charging the Headset7 Battery Power Indicators8 Headset Controls9 On/Off/Standby10 Pairing with a Phone11 Pairing with a Computer12 Multiple Device Pairing13 Multipoint Mode15 Proximity Pairing16 Microphone Positioning17 Making a Call18 Answering a Call19 Operation While Using the Charger/Adapter20 Additional Functions Last Number Redial Rejecting a Call Voice Dial Transfer Audio Turn Indicator Lights On/Off Automatic Bluetooth Connection22 Reset Paired Devices List23 Call Waiting/ Rejecting a Call24 Specifications25 Functions & Indicators 29 Warranty30 FCC Notice to Users31 IC Notice to Canadian Users203110A_B250-XT+_UserGuide_08-26-11.indd 3 8/26/2011 4:58:47 PM
VXi BlueParrott® B250-XT+ User Guide4PACKAGE CONTENTS124 5 1. B250-XT+ Wireless Headset with Leatherette Ear Cushion 2. Windscreen 3. Foam Ear Cushion 4. Auto (DC) Charger 5. AC Charger 6. User Guide (not shown)3203110A_B250-XT+_UserGuide_08-26-11.indd 4 8/26/2011 4:58:56 PM
5VXi BlueParrott® B250-XT+ User GuideSAFETY INSTRUCTIONS / GLOSSARYSAFETY INSTRUCTIONS• Avoidhearingdamage.Setvolumeatlowestcomfortablelevel.Ifyouexperienceringinginyourearsorvoicessound muffled, stop using the headset. Avoid turning up volume to block noisy surroundings (it’s possible to adapt to volume that is too high).• Checkwithlocalandstatelawsregardingcellphone/headsetusagewhileoperatingamotorvehicle.• Donotimmerseanypartofthisproductinwater.• Plasticbagsandsmallpartsmaycausechokingifingested.Keepthemawayfromsmallchildrenandpets.• Useonlythepowercordsincludedwiththisproduct.• Avoidtemperaturesexceeding140°F(willcauseequipmentfailure).GLOSSARY OF TERMSOn: Headset is on, but there is no connection to the phone (red light will flash).MFB: Abbreviation for “Multifunction Button.”Multipoint Mode: Multipoint Mode allows you to pair and switch between two Bluetooth devices. Paired: Two Bluetooth devices agree to communicate with one another.Standby Mode: Headset is on, Bluetooth link is active, and the user is not on a call (blue light will flash).Talk Mode: Headset is in use with the cell phone while the cell phone is on an active call (blue light will flash).203110A_B250-XT+_UserGuide_08-26-11.indd 5 8/26/2011 4:58:57 PM
VXi BlueParrott® B250-XT+ User Guide6CHARGING THE HEADSETConnect charger cord into the headset’s charging port. The MFB’s indicator light may turn green for several seconds while the headset determines the level of charge the battery is holding. Do not remove the headset from the charger. If the headset is not fully charged, the indicator will turn RED within a short period (less than 3 minutes). When the indicator turns green—and stays green—the unit is fully charged. A fully discharged battery will need approximately 3.5 hours to achieve a complete charge.AC ChargerHeadset Charging PortAuto (DC) Charger203110A_B250-XT+_UserGuide_08-26-11.indd 6 8/26/2011 4:58:58 PM
7BATTERY POWER INDICATORSWhile charging, the MFB’s indicator light shows the level of battery power on your B250-XT+ as follows: Green light: Fully charged. Over 20 hours’ talk time.Green & red lights together: Approximately 60 seconds away from full charge.Red light: Less than a full charge.For best performance, keep charging headset when not in use.VXi BlueParrott® B250-XT+ User GuideIndicator Light203110A_B250-XT+_UserGuide_08-26-11.indd 7 8/26/2011 4:58:58 PM
8VXi BlueParrott® B250-XT+ User Guide8HEADSET CONTROLSVolume Increase: Quickly press and release the Volume Up/Mute button. Repeat until desired volume is attained.Volume Decrease: Quickly press and release the Volume Down button. Repeat until desired volume is attained.Microphone Mute/Un-Mute Hold down the Volume Up/Mute button for 2 seconds until you hear a beep. A mute reminder beep will be heard every 10 seconds. Repeat to un-mute.Multifunction Button (MFB) & Indicator LightsVolume Up / MuteVolume Down203110A_B250-XT+_UserGuide_08-26-11.indd 8 8/26/2011 4:58:58 PM
9ON / STANDBY / OFFVXi BlueParrott® B250-XT+ User GuideTurn Headset On: Hold down the MFB for approximately 2-3 seconds until you hear a voice prompt, “Power on.” The red light will flash once every second.Standby Mode: Once the headset is turned on (after the initial pairing), it will attempt to connect to the last device that it was paired with, putting itself into standby mode. (The headset can also beputintostandbymodewithaquickpressandreleaseoftheMFB).Thebluelightwillflashindi-cating an active Bluetooth link. The headset will have a voice prompt, “Your headset is connected.”Turn Headset Off (conserves battery power): Hold down the MFB for approximately 2-3 seconds until you hear a voice prompt, “Power off.” A red light will flash 4 times and the headset will turn off.203110A_B250-XT+_UserGuide_08-26-11.indd 9 8/26/2011 4:58:59 PM
VXi BlueParrott® B250-XT+ User Guide10PAIRING WITH A PHONEKeepheadsetandphonenolessthan3inchesandnomorethan3feetapartwhilepairing.Keepother Bluetooth devices at least 50 feet away, or turn them off. NOTE: The headset can be paired with up to 8 different devices but can only be connected to one at a time. It can only switch back and forth between 2 devices in Multipoint Mode. 1. Turn headset off (page 9). 2. Hold down the headset’s MFB until the lights flash, alternating red and blue, and you hear 2 rising tones, followed by 4 more tones. IMPORTANT: Wait for all tones and for both lights to flash, alternating red and blue. This may take up to 15 seconds. Release the MFB. 3. Put your cellular phone into Bluetooth Discovery Mode per the manufacturer’s instructions. 4. Wait while the devices discover each other: This could take up to 2 minutes. When the phone discovers the headset, select “Pair” and enter a passcode of “0000” when instructed. When pairing is complete the headset’s alternating blue and red light will stop flashing and the phone will prompt you to ‘connect’ to the headset. Enter “Yes” on the phone to connect to the headset. Once connected, the blue light will flash indicating that the headset is in Standby Mode and ready to receive calls.203110A_B250-XT+_UserGuide_08-26-11.indd 10 8/26/2011 4:58:59 PM
PAIRING WITH A COMPUTERVXi BlueParrott® B250-XT+ User Guide 11Keepheadsetandcomputernolessthan3inchesandnomorethan3feetapartwhilepairing.KeepallotherBluetoothdevicesatleast50feetaway,orturnthemoff. 1. Turn headset off (page 9). 2. Open the computer’s Bluetooth connection manager. 3. Put headset into pairing mode (page 10). 4. Instruct Bluetooth connection manager application to discover Bluetooth device. Enter pass-code “0000” when prompted. 5. Wait while the devices discover each other. This could take up to 2 minutes. The headset’s alternating red and blue light will stop flashing and the red light will continue to flash. After pairing is complete, the Bluetooth computer will “ring” the headset. Press and release the MFB once to establish a Bluetooth link to the computer. Press and release the MFB again to disconnect from the computer (double blue flash every second). Once paired, connection can be made by pressing the Volume Down button for 1-2 seconds. Tones will be heard and a connection should be established.203110A_B250-XT+_UserGuide_08-26-11.indd 11 8/26/2011 4:58:59 PM
VXi BlueParrott® B250-XT+ User Guide12MULTIPLE DEVICE PAIRINGThe B250-XT+ can pair with up to 8 devices; however, only one device may be connected to the headset at a time, unless the headset is in Multipoint Mode (see page 13). To pair the headset with a Bluetooth cell phone or other Bluetooth device, such as a Bluetooth enabled computer, follow the instructions on pages 10 and 11 of this manual. Remember that all devices except for the one being paired must either be powered off or at least 50 feet away during the pairing process. Once all devices are paired, connection to the last paired device can be made by turning the headsetoffandthenonagain,orwithaquickpressoftheMFB.Theheadsetwillconnecttothedevices in reverse order of pairing. For instance, if device A, B and C were paired in that order, connection will be established to C first. If C is not available (turned off, out of range), the headset will connect to B, etc.203110A_B250-XT+_UserGuide_08-26-11.indd 12 8/26/2011 4:58:59 PM
13MULTIPOINT MODEVXi BlueParrott® B250-XT+ User GuideMultipoint Mode allows you to pair and switch between two Bluetooth devices. ENABLING MULTIPOINT MODE 1. Turn the headset on (see page 9). It will display a blinking red light and you will hear a voice prompt, “Power on.” 2. WhilepressingtheMFBbutton,quicklypresstheVolumeUpandVolumeDownbuttonsatthe same time, and then release all buttons. 3. You will hear 4 rising tones. 4. Once Multipoint Mode is active, shut the headset off. PAIRING the B250-XT+ HEADSET to the FIRST BLUETOOTH DEVICE 5. Get the first Bluetooth device ready to pair to the headset. 6. Put the headset in pairing mode (see page 10). 7. Once the first Bluetooth device is connected, shut off the device and the headset.203110A_B250-XT+_UserGuide_08-26-11.indd 13 8/26/2011 4:58:59 PM
VXi BlueParrott® B250-XT+ User Guide14MULTIPOINT MODEPAIRING the B250-XT+ HEADSET to the SECOND BLUETOOTH DEVICE 8. Repeat steps for pairing the second Bluetooth device 9. Get the second Bluetooth device ready to pair to the headset. 10. Put the headset in pairing mode (see page 10). 11. When the second Bluetooth device is connected, turn it and the headset off.USING TWO BLUETOOTH DEVICES with the B250-XT+ HEADSET 12. The Start with the B250-XT+ headset turned off. Turn both Bluetooth devices on, and make sure both are ready to accept the headset connection. 13. Power on headset (see page 9). 14. The B250-XT+ headset will connect to both Bluetooth devices. As each Bluetooth device connects to the headset, you will hear the voice prompt “Your headset is connected.”203110A_B250-XT+_UserGuide_08-26-11.indd 14 8/26/2011 4:58:59 PM
15PROXIMITY PAIRINGVXi BlueParrott® B250-XT+ User GuideProximity Pairing enables the headset to find the closest “discoverable” phone. 1. Make sure the headset is off.  2. HoldtheMFBdownandquicklypresstheVolumeDownbutton. 3. You will hear 2 half-second tones and the voice prompt “Discovering” in the headset. 4. The headset lights will rapidly flash blue. 5. The headset initiates pairing activity, and the user has to accept the incoming pairing invita-tion on the phone. NOTE: This may include entering the pin number “0000” (four zeros).203110A_B250-XT+_UserGuide_08-26-11.indd 15 8/26/2011 4:58:59 PM
VXi BlueParrott® B250-XT+ User Guide16MICROPHONE POSITIONINGPosition the microphone near the corner of your mouth. Correct positioning ensures that the noise cancellation technology works properly. Slight adjustment of the microphone may help to achieve optimum performance. Itisimportantthattheword“TALK”(whichis embossed on the microphone housing) is positioned towards your mouth.The word “TALK” is embossed at the base of the microphone203110A_B250-XT+_UserGuide_08-26-11.indd 16 8/26/2011 4:59:14 PM
MAKING A CALLVXi BlueParrott® B250-XT+ User Guide 17If you have not paired the headset and phone together yet, you must do so (page 10). 1. Turn on your cell phone. Be sure the Bluetooth option is enabled on your phone (refer to your phone’s user guide for instruction). 2. Put headset on and properly position the microphone (page 16). To turn headset on, press MFB for 2-3 seconds. The headset will automatically attempt to connect with the last device it was paired or connected with. Once connected, the headset will enter Standby Mode. 3. Dial the phone and make a call as usual. Or use the headset’s Voice Dial function (page 20) to make a call. 4. Toendcall,quicklypresstheMFBontheheadsetandrelease.Youwillhearavoiceprompt,“Call terminated.” The call will end and the headset will enter Standby Mode.203110A_B250-XT+_UserGuide_08-26-11.indd 17 8/26/2011 4:59:14 PM
VXi BlueParrott® B250-XT+ User Guide18ANSWERING A CALLIn order to answer a call, the headset must be in standby mode (page 9). 1. Put headset on. Position the microphone (page 11). 2. When your cell phone rings, you will hear ring tones in the headset. Answer the call by quicklypressingtheheadset’sMFBandrelease.Youwillhear2risingtonesandtheMFBbutton will blink blue every second. 3. Toendthecall,quicklypresstheMFBontheheadsetandrelease.Youwillhearavoiceprompt, “Call terminated,” and the headset will enter standby mode.203110A_B250-XT+_UserGuide_08-26-11.indd 18 8/26/2011 4:59:14 PM
19OPERATION WHILE USING THE CHARGER / ADAPTERVXi BlueParrott® B250-XT+ User GuideThe B250-XT+ headset will operate from battery power or from the AC or DC charger/adapter.NOTE: Do not attach the charger mid-call. This causes the headset to change modes, and the call will be lost.When the headset is operating from the battery, all indicator lights and sounds will function as described in this guide.When the headset is operating from the charger/adapter, the headset—including the audio indica-tors—will function as described in this user guide. However, the MFB lights will indicate the bat-tery charge status (see page 6).While the headset is on the charger, press the MFB once to re-establish the Bluetooth connection to the phone.After the battery is fully charged, the MFB charge light will turn and stay green as long as the charger/adapter is connected to the headset. While the headset is fully charged and the charge light is green, the blue indicator light will also be on if the headset is powered on.203110A_B250-XT+_UserGuide_08-26-11.indd 19 8/26/2011 4:59:14 PM
VXi BlueParrott® B250-XT+ User Guide20ADDITIONAL FUNCTIONSNOTE: Your cell phone must support the following functions (consult the phone owner’s manual).LAST NUMBER REDIALTo re-dial the last number that was dialed from the cell phone, press and hold the Volume Down button for approximately 1 second. A beep will be heard and the phone will redial the last number.REJECT A CALLTo reject an incoming call, press and hold the MFB for 2 seconds. You will hear 2 falling tones and the incoming call will be transferred to your voicemail (if available).VOICE DIALTousetheVoiceDialfeatureofthecellphone,quicklypresstheMFBontheheadset.Atonewillbeheardandthephone’svoicedialershouldopen.Clearlyspeakthecommand.Repeatquickpressofthe MFB to end Voice Dial. The headset must be in Standby Mode to use this feature.More functions on page 17203110A_B250-XT+_UserGuide_08-26-11.indd 20 8/26/2011 4:59:14 PM
21ADDITIONAL FUNCTIONSVXi BlueParrott® B250-XT+ User GuideTRANSFER AUDIOTo transfer audio from the headset to the cell phone while on a call, press and hold the Volume Down button for 1-2 seconds. A tone will be heard and audio will transfer to the phone; repeat to transfer audio back to the headset. When audio is transferred to the phone, the red light will flash until audio is transferred back to the headset. TURN HEADSET INDICATOR LIGHTS ON/OFF AquickpressofboththeVolumeUpandVolumeDownbuttonsatthesametimewillturnthehead-set indicator lights off, repeat to turn the indicator lights on. When powering on the headset, the indicator lights will be in the same state as they were when last powered off.AUTOMATIC BLUETOOTH CONNECTIONWhen the headset is powered on, it will automatically attempt to connect to the last device it was paired with. If the headset was paired with multiple devices and the last connected device is not available (turned off, out of range,etc.), the headset will attempt to connect to the second to the lastdeviceitwasconnectedto,etc.Itisalsopossibletoreconnecttothedevicewithaquickpress of the headset’s MFB. A tone will be heard and the two devices should connect.203110A_B250-XT+_UserGuide_08-26-11.indd 21 8/26/2011 4:59:14 PM
VXi BlueParrott® B250-XT+ User Guide22RESET PAIRED DEVICES LISTTo reset the headset’s internal paired devices list, hold the headset near your ear. Press and hold the Volume Up and the Volume Down buttons simultaneously for approximately 5-6 seconds until two low tones are heard.This procedure may be necessary if the headset will not pair or connect to a device.NOTE: Pairing information for devices previously paired with the headset will be lost. Headset will need to be paired to the device after reset has occurred.203110A_B250-XT+_UserGuide_08-26-11.indd 22 8/26/2011 4:59:14 PM
CALL WAITING / REJECTING A CALLVXi BlueParrott® B250-XT+ User Guide 23 1. To accept an incoming call while talking on an active call, press the MFB button twice to put the active call on hold.  2. Toswitchtotheoriginalcall,quicklypresstheMFBbuttononce.NOTE: Depending on your phone’s programming, you may be able to switch between calls from the phone’s call switch menu. 3. To reject an incoming call while on an active call, press and hold the MFB button for 2 sec-onds. The incoming call will go to voicemail.203110A_B250-XT+_UserGuide_08-26-11.indd 23 8/26/2011 4:59:14 PM
VXi BlueParrott® B250-XT+ User Guide24SPECIFICATIONSRange: Up to 66 feet. Best range is achieved with line-of-sight positioning of headset and cell phone. Certain conditions and obstructions, such as wireless devices, placing your phone on a metal surface (such as your vehicle’s hood), walls, etc., can inhibit radio wave transmission and reduce range.Talk Time: 20+ hours on a 3.5-hour charge.Standby Time: Up to 490 hours on a 3.5-hour charge.Auto (DC) Charger Inline Fuse Replacement: If neither of the headset charging indicators light when the auto adapter is connected to the headset and power source, check the charger’s inline fuse. Replace with 1A 250V Slow-Blow glass fuse (3AG) if necessary. Fuses are available at most automotive stores. To replace, simply unscrew the tip of the auto adapter (see photo, right) and remove the fuse (be careful not to lose the spring that is inside). Put new fuse in and screw the tip back on.Auto Adapter Tip203110A_B250-XT+_UserGuide_08-26-11.indd 24 8/26/2011 4:59:14 PM
25FUNCTIONS & INDICATORSVXi BlueParrott® B250-XT+ User GuideFunction Button/Duration of press LED Indicator Audio Indicator Voice IndicatorPower On MFB / 2-3 seconds Red light flashes Two rising tones “Power on”Power Off MFB / 2-3 seconds All lights go off Two falling tones “Power off”Enable Pairing Mode MFB / 5-15 seconds Red & blue lights flash alternatelyTwo + Four rising tones “Discovering”Volume Up Volume Up / quick press NONE Single tone NONE”Volume Down Volume Down / quick press NONE Single tone NONEMute (On/Off) Volume Up / 2 seconds NONE Single tone every 10 seconds while muted NONEVoice Dial (Start/End) MFB / 1 quick press NONE Single tone NONELast Number Redial Volume Down (1 second) NONE Single tone NONE203110A_B250-XT+_UserGuide_08-26-11.indd 25 8/26/2011 4:59:14 PM
VXi BlueParrott® B250-XT+ User Guide26FUNCTIONS & INDICATORSFunction Button/Duration of press LED Indicator Audio Indicator Voice IndicatorAnswer a Call MFB (quick press) Blue light flashes slightly slower Two rising tones NONEEnd a Call MFB (quick press) Blue light flashes slightly faster Two falling tones “Call terminated”Reject a Call* MFB (2 seconds)NONE *Sends call to voicemail (if available)Two falling tones NONETransfer Audio Volume Down (1-2 seconds) NONE Long tone NONEDisable LEDs Volume Up/Volume Down (quick press) NONE Short tone NONEEnable LEDs Volume Up/Volume Down (quick press) LEDs go on Short tone NONE203110A_B250-XT+_UserGuide_08-26-11.indd 26 8/26/2011 4:59:15 PM
27FUNCTIONS & INDICATORSVXi BlueParrott® B250-XT+ User GuideFunction Button/Duration of press LED Indicator Audio Indicator Voice IndicatorReset Paired DevicesVolume Up/Volume Down (5-6 seconds) NONE 2 low tones NONEDisconnect from Device NONE Red light, slow flash NONE “Your headset is disconnected.”Link Loss NONE Red light, slow flash NONE “Out of range”Low Battery NONE Red light, fast flash Long, high tone @ 20 seconds “Low battery”Incoming Call Hold MFB (press twice) NONE Single tone NONEAccept Incoming Call/Held MFB (quick press) NONE Short tone NONEReject Incoming Call/Held MFB (1-2 seconds) NONE 2 falling tones NONE203110A_B250-XT+_UserGuide_08-26-11.indd 27 8/26/2011 4:59:15 PM
VXi BlueParrott® B250-XT+ User Guide28FUNCTIONS & INDICATORSFunction Button/Duration of press LED Indicator Audio Indicator Voice IndicatorEnable Multipoint ModeMFB / Vol Up & Vol Down (quick press) NONE 4 rising tones NONEDisable Multipoint ModeMFB / Vol Up & Vol Down (5-6 seconds) NONE 4 falling tones NONEConnected A2DP NONE Double flashing blue MFB NONE NONE203110A_B250-XT+_UserGuide_08-26-11.indd 28 8/26/2011 4:59:15 PM
29VXi WARRANTYVXi BlueParrott® B250-XT+ User Guide(1) VXi warrants that your B250-XT+ headset system will be free from defects in material and workmanship for one year from the date of purchase. If, during the first year from the date of purchase, your B250-XT+ headset system fails to work due to a defect in material or workmanship, VXi will repair or replace the product, at its election, free of charge. Without proof of purchase, the warranty period begins on the date of manufacture. Consumable components (for example, cushions, battery and fuse) are not included in thisone-yearwarranty.(2)Theforegoinglimitedwarrantydoesnotcoverequipmentfailureattributabletoaccident, improper operation, misuse, abuse, or any cause other than defects in the materials or workman-ship of VXi’s products. (3) VXi’s obligations under this warranty are limited to repair or replacement (at ouroption)ofanydefectivepartreturnedtoVXiatthecustomer’sexpense.ReturnedproductsrequireaReturn Authorization that may be obtained by calling 800-742-8588. Products returned to VXi for repair under this warranty will be return shipped to the customer at VXi’s expense.” (4) THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not permit the exclu-sion of implied warranties and the foregoing exclusions may not apply to you. (5) In no event shall VXi be responsibleforanyotherdamageswhatsoever,includingdirect,indirect,special,incidental,consequential,or other damages for breach of this or any other warranty, express or implied.203110A_B250-XT+_UserGuide_08-26-11.indd 29 8/26/2011 4:59:15 PM
VXi BlueParrott® B250-XT+ User Guide30FCC NOTICE TO USERSThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Users are not permitted to make changes or modify the device in any way. Changes or modifications not approved by VXi Corporation will void the user’s authority to operate the equipment.NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevicepursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-tions.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmenton and off, the user is encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antennae–Increasetheseparationbetweentheequipmentandthereceiver–Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.– Consult the dealer or an experienced radio/TV technician for help.203110A_B250-XT+_UserGuide_08-26-11.indd 30 8/26/2011 4:59:15 PM
31IC NOTICE TO CANADIAN USERSVXi BlueParrott® B250-XT+ User GuideThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES-003(CetappareilnumériquedelaclassebestconformeàlanormeNMB-003duCanada).203110A_B250-XT+_UserGuide_08-26-11.indd 31 8/26/2011 4:59:15 PM
VXi Corporation | 271 Locust Street, Dover, NH 03820 USAToll Free: 800-742-8588 | Phone: 603-742-2888 | www.blueparrott.comPN203109A ©2011 VXi CorporationPrinted in China®203110A_B250-XT+_UserGuide_08-26-11.indd 32 8/26/2011 4:59:16 PM

Navigation menu