Valeo Comfort and Driving Assistance A05IAA Immobilizer User Manual User Guide for 11M TR0A RKE Systems revised
Valeo Comfort and Driving Assistance Immobilizer User Guide for 11M TR0A RKE Systems revised
User Guide
Date : July 20
th
2010
Type designation of the transmitter:
313.85MHz transmitters
4 buttons 72147-TR0A-A020-M2, A05TAA
3 buttons 72147-TR0A-A120-M2, A05TAA
Receiver/immobilizer
39730-TR0A-A020-M2, A05IAA
Trade Mark : Valeo
Car Manufacture : Honda
Transmitter Instructions :
Operation of Buttons:
• Press; Press the Button for 500ms or ½ second and released.
• Press and Hold; Press and Hold the Button for 1.5 second and released.
• Quick Press; Press the Button for less than 500ms or ½ second and released.
The Systems called RKE (Remote Keyless Entry) has two separate units: A Receiver and
a Transmitter. The Receiver is located in the Vehicle and the Transmitter is carry by the User.
The Function consists in allowing the remote control of the Vehicle Door Lock and Unlock
Other convenience functions such as open the Trunk, controls the Power Windows Up and Down
and PANIC for added Security.
Door Lock: Press the Lock Button and released, the LED lights on the Transmitter.
Door UnLock: Press the Unlock Button and released, the LED lights on the Transmitter.
Trunk: Press and Hold the Trunk Button, the LED will blink once on the Transmitter.
User Guide for 11M TR0A RKE and immobilizer System
Valeo Security Systems- DSA
Models T
Models TModels T
Models TR0
R0R0
R0A: 313.85
A: 313.85 A: 313.85
A: 313.85
Transmitter
TransmitterTransmitter
Transmitter-
--
-Receiver
ReceiverReceiver
Receiver-
--
-immobilizer
immobilizerimmobilizer
immobilizer
PANIC: The PANIC button is use for Alert Attentions and added security to the User.
If at any time the user feel he or she is in a danger situation or want to alert others to stay
away from the Vehicle, the User can Press and Hold the PANIC Button for 1.5 second-
The Horn will sound and Lights will flash for up to 30 second, until the Panic Time Out.
If more alert is needed, the user can press and Hold the PANIC Button again for 1.5
second.
To Stop the PANIC Alert, simple perform a “Quick press” of any buttons.
Power Windows: (Up and Down) To use the Power Windows-
• Windows UP: Press and Hold the LOCK button for 1.5 second. The Windows glass
will go up until it has reached the top of the window.
• If for any reason, the User want to Stop the window glass from going up,
simply perform a “Quick Press”, on the Lock button, this will stop the window glass at
it’s current location.
• Windows Down: Press and Hold the Unlock Button for 1.5 second. The Windows
glass will go down until it has reached the bottom of the window.
• If for any reason, the User want to Stop the window glass from going down,
simply perform a “Quick Press”, on the Unlock button, this will stop the window glass at
it’s current location
Receiver/immobilizer Instructions :
Immobilizer function :
• When the user insert the key, the immobilizer checks the key and, if it is valid, allows the
Engine Control Unit to start of the engine. If someone attempts to start the engine with
an unrecognised key, the immobilizer will not allow to start the engine. In any case the
immobilizer can stop the engine
Receiver function:
• The receiver recognize a button press on a remote control, checks if it is valid and
transmit the command of door lock/unlock, trunk, windows and sliding doors controls
Note
The keys carry a unique electronic code. For this reason and to ensure your safety, replacement
keys are only possible through an authorised Honda dealer.
Always keep a replacement key in case one is lost. If a key is lost contact an authorised Honda
dealer as soon as possible
Maintenance
Honda cannot guarantee the system’s operation if the system has been modified or if any added
on equipment has been installed to it. In case of a problem with the immobilizer system or the
key, consult an authorised Honda dealer.
FCC ID : N5F-A05IAA
FCC ID : N5F-A05TAA
IC: 3248A-A05IAA
IC: 3248A-A05TAA
These devices comply with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1) These devices may not cause harmful interference and,
(2) These devices must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications made to these equipments not expressly approved by Honda may void
the FCC authorization to operate these equipments.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Radiofrequency radiation exposure Information:
The radiated output power of the device is far below the FCC radio frequency exposure limits.
Nevertheless, the device shall be used in such a manner that the potential for human contact
during normal operation is minimized.