Vansco Electronics LP 740001 Vansco True Ground Speed Sensor User Manual manual2

Download:
Mirror Download [FCC.gov]
Document ID	359749
Application ID	6ksXdRex7j40W3JIyinHKw==
Document Description	manual2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.7kB (171294 bits)
Date Submitted	2003-09-24 00:00:00
Date Available	2003-09-24 00:00:00
Creation Date	2003-09-08 21:05:44
Producing Software	FlowPort Server
Document Lastmod	2003-09-10 22:31:36
Document Title	manual2
Document Creator	FlowPort

FCC ID: MG R740001
musco
Vansco True Ground Speed Sensor
MODEL 740
The True Ground Speed Sensor uses a microwave signal and the Doppler effect to
measure ground speed accurately for mobile equlpment.
Our Mission is to develop and
manufacture products that
consistently exceed customer
expectations In reliability,
performance, and Uri-[line delivery.
Vansco Electronics Ltd. —
An ISO 9001 Company
The True Ground Speed Sensor combines state~of-the-art electronics design and manufacturing.
The electronics are encapsulated in a rugged plastic enclosure to ensure reliable operation in
harsh environments. Complete testing and certification of the product has been done to deliver a
reliable and accurate speed signal for the OEM or retrofit electronics markets.
The radar provides a standard square wave output. This industry—standard output gives a
continuous ground speed signal whenever the vehicle is moving.
The sensor can be installed at a height between 2
and 4 test (0.6 — 1.2 m) above the ground or above
the top of a crop. The small size of the sensor
simplifies mounting on the vehicle.
The True Ground Speed Sensor has been
subjected to the full spectrum ot tests specilied in
the ASAE EP-455 Standard for electronics on
mobile equipment, including temperature,
vibration, moisture, dustr electrical, and
electromagnetic tests. Test results show that this
sensor meets and exceeds the standards set by
government agencies and industry committees for
North American use.
——_._.___
VAmsco
Vansco Electronics Ltd.
1305 Clarence Avenue
Vlfinnipeg, Manitoba
Canada HGT 174
Tel: (20414524775
Fax: l204t47el749
Vansco True Ground Speed Sensor WWW
Proiected Area of Beam for
. 1.52' —
Standard Mounting Height Case . —i
Dlmensmns ¢ _
3.14'
2.32'
_ ax ml?
12’ a
3.99'
i-—27.4'———i-—16.4' ~—~—9.u'
Specifications - MODEL 740000 ' 3.99' “l 3.50'
Velocity Henge 0.6 to 44 mph (1 to 70 km/hr) Electrical Supply Max 120 mA @ 12 v DC
+9 to 16V DC input voltage range
Accuracy < t (We for 0.6-2 mph (1-3 km/hr)
< a 1% for2-44 mph (3-70 km/hr) Output Frequency 58.9 Hflmph @ 35° mounting angle
other frequencies are available by
Beam Footprint Elliptical, 16.4“ (417 cm) major axis custom order
& 9.0" (229 cm) minor axis at 24"
(61 cm) mounting height Square Wave ZOH x 1000 ohms
Beam Pattern 125“ in the vertical plane & 12° Output ZOL s 100 ohms
wide, symmetric around centerline VOH .. +\/(battery) - to v
of sensor VOLs 1.0 V at 15 mA
. lout(nlax.) :25 mA
Mounting Angle 35° depressed below horizontal.
rear facing (Preferred to reduce . Electrical Signal to ground & signal to power
potential damage) or lorward facing ”Mum," supply protection
Electrical transient protection
Mounting Height 12" to 48” (Oslo 1.2 m) above the per ASAE 93.455 Standard
ground or above the top oi the crop,
typical mounting height 24“ (05 m) Step Response 5 200 milliseconds delay
Mounting Fasteners Three (8) of 1/ “ — 20 UNC cap Start/Stop pe|ay s 12 inches (25 cm)
screws or M6 screws
Overall Dlmimslofls 38" x 35“ X 35” Microwave Freq. 24.125 GHz (standard)
(9.9 cm x 9.9 cm x 9.2 cm) Memos z 50 MHZ
Weight Approximately 460 grms w/ cable
Materials Enclosure: black Nylon. glass Microwave pomr 500mw, Emp
reinlorced
Approvals Piss-210 (Industry Canada)
Cable Cable: water resistant 18 AWG 4/0 FCC (Part 15, USA)
SJOW
Cable length: =20’ (=51 cm)
Connector Standard: FMC, F205-14A624-EA Environmental EN ISO 14952
Pin 1 +12V DC (nominal 12V Compliance ASAE EP-455 which includes
batten/ voltage) standards for reverse polarity, EMI.
Pin 2 “Radar Present Llne" +12V electrical transients (such as lead
unless otherwise Specified dump, inductive load switching),
Pin 3 Ground chemical corrosion, dust. salt spray,
Pin 4 Speed Signal Output rain. wash. mechanical shock, and
vibration.
Mating Connector FMC, EGDB—14A454»NA
Operating Temp. 400 to +350 (-40F to 155F)
other connectors available by
custom order.
Vansm Tme Gmuno Speed Sersor- Prlrlled ll’l Canada. 11/02

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Creator                         : FlowPort
Creation Data                   : D:Binary
Modify Date                     : 2003:09:10 22:31:36-05:00
Create Date                     : 2003:09:08 21:05:44-05:00
Page Count                      : 2
Producer                        : FlowPort Server
Mod Date                        : 2003:09:10 22:31:36-05:00
Creation Date                   : 2003:09:08 21:05:44-05:00
Metadata Date                   : 2003:09:10 22:31:36-05:00

EXIF Metadata provided by EXIF.tools