Vantec 7 1 Channel Pcie Sound Card Ugts110 Users Manual Volari V3 Graphics Accelerator
UGTS110 to the manual d4908f18-4ec6-4d28-80ee-ce7bac44930b
2015-02-03
: Vantec Vantec-7-1-Channel-Pcie-Sound-Card-Ugts110-Users-Manual-457512 vantec-7-1-channel-pcie-sound-card-ugts110-users-manual-457512 vantec pdf
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
7.1 Channel PCIe Sound Card User Manual Model: UGT-S110 All brand names and trademarks are properties of their respective owners. www.vantecusa.com Features z Full-duplex playback and recording z Full-duplex 8CH DAC/2CH ADC z Support 48/44.1 KHz sampling rate for both playback and recording z Supports the latest Dolby® Digital EX and DTS ES 6.1/7.1 CH DVD soundtrack playback z DirectSound™ 3 HW acceleration z Compliant with PCI Express Base Specification 1.0a z ACPI compliant power down management z Support Windows® 2000/XP/2003/Vista/7 (32/64 bit) System Requirements z PCI Express-enabled system with an available PCI Express slot z Windows® 2000/XP/2003/Vista/7 (32/64 bit) z DirectX 8.1 above is required Package Contents z Vantec 7.1 Channel PCIe Sound Card x 1 z Mini-DIN To 3.5mm Port ( fan-out cable) x 1 UGT‐S110 Page 2 z Installation Guide x 1 z Driver CD x 1 * User’s Manual Is on Driver CD Note: Contents may vary depending on the market/country. Hardware Installation 1. Turn off the computer, Unplug the power cord. 2. Open the computer case. Check with your computer manufacturer if you need additional instructions. Remove any old third-party sound cards or the metal PCIe slot bracket. 3. Insert the sound card into a blank PCIe slot. Make sure that all of its pins are touching the PCIe slot’s contacts. 4. Check the sound card is inserted into the PCIe slot firmly, and secure it with a screw. 5. Close the case. Plug in the power cord and other cables. 6. Connect the Mini-DIN to 3.5mm fan-out cable bundled in this package and use for 8-channel line output jack. Software Installation For Windows® 2000/ XP/2003/Vista/7 (32/64 bit) UGT‐S110 Page 3 1. Start your PC, place the Driver CD into the CD-ROM drive. Click the Start button on the taskbar and click Run. Type “D:\UGT-S110\2000_XP_2003_Vista_7\Setup.exe”. (Assuming you have placed the CD in CD-ROM drive labeled as D). 2. Follow any on-screen instructions to complete the software installation. 3. Restart your system. 4. Once you have rebooted the computer, this 7.1 Channel PCIe Sound card is ready to be used. Physical Connections UGT‐S110 Page 4 The rear panel of this 7.1 Channel PCIe Sound Card has the following jacks: 1. Line In (blue): Connect to tape/CD/DVD player, or other audio sources for output mixing and/or recording 2. MIC In (pink): Connect to microphone 3. Line Out (green): Connect to headphone or amplifying speakers. In 4-channel, 6-channel, and 8-channnel configurations, the function of this port becomes Front Speaker Out 4. Rear-Speaker/Surround-Speaker (black): Connect to Rear speakers while 4/6/8 channel speaker mode is enabled (via external amplifier) UGT‐S110 Page 5 5. Center/Subwoofer (orange): Connect to center/subwoofer speakers while 6/8 channel speaker mode is enabled (via external amplifier) 6. Back-Speaker (gray): Connect to back speakers while 8 channel speaker mode is enabled (via external amplifier) 7. S/PDIF Out: Connect to digital input of external audio device via an optical S/PDIF cable Please refer to the audio configuration table below for the function of the audio ports in 2, 4, 6, 8-channel configuration. UGT‐S110 Page 6 Port 2-channel 4-channel 6-channel 8-channel Front Front Front Speaker Speaker Speaker Rear Rear Rear Speaker Speaker Speaker - Center Center /Subwoofer /Subwoofer - Back (*) Green Black Orange Gray Line Out - - - - Speaker (*) 4-Channel mode is not available on Vista/7 (32/64 bit) In addition to the rear panel jacks, this 7.1 Channel PCIe Sound Card also has the following internal connection: The Function J3 Analog CD/IN Port(Signals: L-G-G-R) J5 Analog CD/IN Port(Signals: G-R-G-L) Warranty The Vantec 7.1 Channel PCIe Sound Card comes with a 1 year limited warranty(90 day parts). If your unit becomes defective within that time frame, please go to www.vantecusa.com for information on how to receive warranty exchange or repair. Cosmetic defects and missing parts are not covered under this warranty. Please check the contents of the unit to make sure you received all parts. Also, check for any cosmetic flaws. If any parts are missing or if there are cosmetic defects, please contact the retailer from which you purchased the unit immediately and ask for a replacement. Vantec Thermal Technologies www.vantecusa.com UGT‐S110 Page 8
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 8.1.0 (Windows) Company : SWAMP's Workshop Source Modified : D:20101221023854 Creator Tool : Acrobat PDFMaker 8.1 for Word Modify Date : 2010:12:21 10:41:14+08:00 Create Date : 2010:12:21 10:40:43+08:00 Metadata Date : 2010:12:21 10:41:14+08:00 Document ID : uuid:569d9f96-bdd4-4998-a8e3-1bfe1a7afddd Instance ID : uuid:09012df7-5881-484d-b8e6-170cd6a2a1f2 Subject : 2 Format : application/pdf Creator : Deng Chao-Jun Title : Volari V3 Graphics Accelerator Page Count : 8 Page Layout : OneColumn Author : Deng Chao-JunEXIF Metadata provided by EXIF.tools