Vecima Networks LMS3000 Wireless LAN Node User Manual LMS3000 R1 UserGuide

Download:
Mirror Download [FCC.gov]
Document ID	138920
Application ID	Lp+f2zUu/MkJii4Hf8AngQ==
Document Description	users guide 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.62kB (32703 bits)
Date Submitted	2001-03-05 00:00:00
Date Available	2001-03-05 00:00:00
Creation Date	2001-02-27 10:01:47
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2001-02-27 13:05:10
Document Title	LMS3000(R1)UserGuide.book
Document Creator	FrameMaker 6.0

Warnings and Advisories
General Advisory
Operator and maintenance personnel must be familiar with the related safety requirements
before they attempt to install or operate the LMS3000 equipment.
It is the responsibility of the operator to ensure that the public is not exposed to excessive
Radio Frequency (RF) levels. The applicable regulations can be obtained from local
authorities.
Do not operate the LMS3000 CCU or EUM without connecting a 50-ohm termination to the
antenna port. This termination can be a 50-ohm antenna or a 50-ohm resistive load capable of
absorbing the full RF output power of the transceiver.
WARNING!
The CAP must be professionally installed. Antennas and
associated transmission cable must be installed by qualified
personnel. WaveRider assumes no liability for failure to adhere
to this recommendation or to recognized general safety
precautions.
WARNING!
To comply with FCC RF exposure limits, the outdoor antennas for the
LMS3000 CCU or EUM must be fix-mounted on outdoor permanent structures to
provide a separation distance of 2 metres or more from all
persons to satisfy RF exposure requirements. The distance is
measured from the front of the antenna and the human body. It
is recommended that the antenna be installed in a location with
minimal pathway disruption by nearby personnel.
WARNING!
There is a DC signal of 5-7.5V (current limited to 50 mA) on the
Antenna Output of the CCU3000 and the EUM3000. Antennas or
RF test equipment must be able to accept this DC signal or have
a device to block the DC signal. Otherwise, damage can be done
to the antenna, test equipment, and/or the CCU/EUM3000.
APCD-LM014-A
19

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2001:02:27 13:05:10
Title                           : LMS3000(R1)UserGuide.book
Creator                         : FrameMaker 6.0
Producer                        : Acrobat Distiller 4.05 for Windows
Create Date                     : 2001:02:27 10:01:47
Page Count                      : 1

EXIF Metadata provided by EXIF.tools