Venture Global DWS-100 Driveway Alert Sensor User Manual 2
Venture Global Limited Driveway Alert Sensor 2
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2428640 |
| Application ID | 4HyUKMrU5o0iQE+IjnrY6w== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 42.6kB (532530 bits) |
| Date Submitted | 2014-10-27 00:00:00 |
| Date Available | 2014-10-27 00:00:00 |
| Creation Date | 2013-10-17 11:06:25 |
| Producing Software | Corel PDF Engine Version 16.1.0.843 |
| Document Lastmod | 2013-10-17 11:06:25 |
| Document Title | 無標題-2 |
| Document Creator | CorelDRAW X6 |
| Document Author: | Lowes Lo |
Filter Sensitivity 12m Sun Blocker 30S 8m 7m 4m 0.5-1m/sec 1-2 m/sec 7S Narrow window adaptor After detect an intruder the sensor will sleep 7 seconds or 30 seconds to save power Sensingwindow Adjustable base Battery compartment Test button Batteryinstallation Night switch Active at darkness All way active AA AA AA AA Installation Install the 4 AA batteries into the battery compartment as the indication on the compartment AA AA AA AA Open the back cover by unlock the screws o/ 7mm Mark the 4 hole on the wall using a pencil. Replace the back cover as the diagram Lock the screws Replace sun blocker 25mm Requires an electric drill for holes to fix the Sensor with the provided ram plug and screws. AA AA AA AA Step 5: Once you have selected the zone and melody, trigger the sensor by pressing test button once. If successful, the receiver will generate a short tone. Press the button to exit pairing mode, the system is now ready to use. AA If the PIR sensor coding is the same as another transmitter you must change the code. When you have changed the code, you need to repair the PIR sensor. AA Adjustthesensortomake agoodoperationangle AA Mountingthesensorwithscrewprovided AA Code Conflict 2.8 Deg Press and hold the test button, insert the battery and hold the button 5 seconds. The LED will flash 5 time when a new code is generated 1.5M 1.2M 12M 5.8 deg Normal Narrow Aperture 26 x 20mm 9 x 14mm FCC Statement: CHIME ID Learning button Melody selector LIGHT & CHIME This sensor works with the receiver (chime) and must be paired before using Step 1: Insert battery to the sensor. Step 2: Insert batteries to the receiver (chime). Step 3: Enter pairing mode for receiver (chime unit). Press and hold the learning button 3 seconds. The LED #1 will flash. Step 4: Press the button again to move to the zone you want to pair with. Press melody selector to scroll through the melodies. Once you hear your preferred melody, do not press again as it is now selected. There are 18 melodies & sound effects in sequence. LIGHT Pairing Narrowwindow adaptor This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Reorient or relocate the receiving antenna. * Increase the separation between the equipment and receiver. * Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Modifications to this product will void the user's authority to operate this equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 2 Create Date : 2013:10:17 11:06:25+08:00 Modify Date : 2013:10:17 11:06:25+08:00 Producer : Corel PDF Engine Version 16.1.0.843 Author : Lowes Lo Creator : CorelDRAW X6 Title : 無標題-2EXIF Metadata provided by EXIF.tools