Venture Global HAX-800 Wireless Entry Mat Sensor User Manual 2
Venture Global Limited Wireless Entry Mat Sensor 2
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2429668 |
| Application ID | 4kdpgvFFUpJDuxNqAhZbNw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 39.63kB (495410 bits) |
| Date Submitted | 2014-10-28 00:00:00 |
| Date Available | 2014-10-28 00:00:00 |
| Creation Date | 2013-10-28 11:34:45 |
| Producing Software | Corel PDF Engine Version 16.1.0.843 |
| Document Lastmod | 2013-10-28 11:34:45 |
| Document Title | 無標題-2 |
| Document Creator | CorelDRAW X6 |
| Document Author: | Lowes Lo |
ENTRY MAT SENSOR PARTS & FUNCTION OPERATION Put the entry mat in the entrance. Put a rugon the top of theentrymat to protect the mat sensor. Sensor pocket Sensor Transmitter Mat Battery Compartment BATTERY INSTALLATION 1. Take out the transmitter from the sensor pocket 2. Open the battery with a small screwdriver 3. insert 2 CR2032 to Battery compartment. 4.Close the battery cover and put the transmitter to the sensor pocket. The sensor will transmit a trigger signal to the receiver when someone step on the mat. BATTERY LOW INDICATOR The status of sensor battery is indicate on the receiver. Please refer to the "battery low indicator" on the receiver. CODE MATCHING AND MELODY SELECTION The Entry Mat works with the receiver (chime or vibrating pager) and must be paired before using Step 1: Insert battery to the sensor. ID Step 2: Insert batteries to the receiver (chime). Step 3: Enter pairing mode for receiver (chime unit). Press and hold the zone selector button 3 seconds. The LED #1 will flash. Step 4: Press the button again to move to the zone you want to pair with. Press melody selector to scroll through the melodies. Once you hear your preferred melody, do not press again as it is now selected. Step 5: Once you have selected the zone and melody, trigger the Entry Mat with step on the mat CODE CONFLICT I f the entry mat sensor coding is same as another change the code of the entry mat sensor . Zone selector button sensor. you must 1. Take out the transmitter from the sensor pocket 2. Open the battery with a small screwdriver 3. Take out 2 CR2032 from Battery compartment. 4.Step on the mat and install the batteries again. The LED will flash 5 times when a new code is generated Melody selector If successful, the receiver will generate a short tone. Press the button to exit pairing mode, the system is now ready to use. FCC Statement Note:This equipment has been tested and found to comply with the Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connet the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consum the dealer or an experienced radio/TV technician for help Note: ModiďŹcations to this product will void the user's authority to operate this equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 1 Create Date : 2013:10:28 11:34:45+08:00 Modify Date : 2013:10:28 11:34:45+08:00 Producer : Corel PDF Engine Version 16.1.0.843 Author : Lowes Lo Creator : CorelDRAW X6 Title : 無標題-2EXIF Metadata provided by EXIF.tools