Verifone OMNI3600C Wireless Point of Sale Terminal User Manual
VeriFone Inc Wireless Point of Sale Terminal
Verifone >
Contents
- 1. users manual 1
- 2. users manual statement
- 3. users manual 2 page1to15
- 4. users manual 2 page16to45
users manual 2 page1to15
VERIX OPERATING ENVIRONMENT SOFTPAY Omni 3600 Installation Guide E-PAYMENT APPLICATION VERIX DEVELOPER TOOLKIT DEVELOPMENT TOOLS VERISHIELD SECURITY ARCHITECTURE OMNI 37XX HAND-OVER-COUNTER MULTI-APPLICATION APPLIANCES OMNI 33XX MULTI-APPLICATION APPLIANCES OMNI 3600 HAND-HELD RADIO MODEM APPLIANCES VERICENTRE APPLIANCE MANAGEMENT SUITE Part Number 22060, Revision D Omni 3600 Installation Guide © 2003 VeriFone, Inc. All rights reserved. No part of the contents of this document may be reproduced or transmitted in any form without the written permission of VeriFone, Inc. The information contained in this document is subject to change without notice. Although VeriFone has attempted to ensure the accuracy of the contents of this document, this document may include errors or omissions. The examples and sample programs are for illustration only and may not be suited for your purpose. You should verify the applicability of any example or sample program before placing the software into productive use. This document, including without limitation the examples and software programs, is supplied “As-Is.” VeriFone, the VeriFone logo, Omni, VeriCentre, Verix, and ZonTalk are registered trademarks of VeriFone. Other brand names or trademarks associated with VeriFone’s products and services are trademarks of VeriFone, Inc. All other brand names and trademarks appearing in this manual are the property of their respective holders. Comments? Please e-mail all comments in this document to Tell_Us_More@VeriFone.com WARNING Do not dispose of the Li-ion smart battery in a fire. Li-ion batteries must be recycled or disposed of properly. Do not dispose of Li-ion batteries in municipal waste sites. VeriFone, Inc. 2455 Augustine Drive Santa Clara CA 95054-3002 www.verifone.com Part Number 22060, Revision D CONTENTS CHAPTER 1 Introduction CHAPTER 2 Omni 3600 Terminal CHAPTER 3 Omni 3600 Base CHAPTER 4 Maintenance Select a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Omni 3600 Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Omni 3600 Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Convenience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Concerns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unpack the Shipping Carton. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Terminal Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Power Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Smart Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Smart Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Smart Battery Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Smart Battery Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Smart Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Turn On/Off the Omni 3600 Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Paper Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Printer Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Install/Replace MSAM Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Install/Replace SIM Card (GSM models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Wireless Transactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Smart Card Reader Transactions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Magnetic Card Reader Transactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Antenna (Some Wireless Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Replace the Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Unpack the Shipping Carton. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Omni 3600 Base Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Omni 3600 Terminal Docking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Spare Smart Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Omni 3600 Base Communications Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Telephone Line Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Telephone Line Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Peripheral Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optional Peripheral Device Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Check Readers Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External Printers Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 24 26 27 27 28 28 29 29 29 30 30 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Teminal and Base Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 OMNI 3600 INSTALLATION GUIDE C ONTENTS Card Readers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 CHAPTER 5 Troubleshooting CHAPTER 6 VeriFone Service and Support CHAPTER 7 Specifications CHAPTER 8 Accessories and Documentation Troubleshooting Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terminal Does Not Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terminal Does Not Turn Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terminal Display Does Not Show Correct or Readable Information . . . . . . . Smart Battery Will Not Charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Telephone Line Connection Does Not Work Properly . . . . . . . . . . . . . . . . . Printer Does Not Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serial Port Does Not Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terminal Does Not Process Transactions . . . . . . . . . . . . . . . . . . . . . . . . . . Keypad Does Not Respond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 33 33 33 34 34 34 35 35 36 Return a Terminal, Base, or Smart Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Environmental. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Omni 3600 Terminal Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Omni 3600 Base Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 41 41 41 42 42 How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Omni 3600 Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Download Cables and Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cables for Optional Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Base Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Telco Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Smart Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thermal Printer Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VeriFone Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Omni 3600 Base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Download Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cables for Optional Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Telephone Line Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 43 43 43 43 43 43 43 44 44 44 44 44 44 44 44 OMNI 3600 INSTALLATION GUIDE C ONTENTS List of Figures Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 Figure 11 Figure 12 Figure 13 Figure 14 Figure 15 Figure 16 Figure 17 Figure 18 Figure 19 Figure 20 Figure 21 Figure 22 Figure 23 Figure 24 Figure 25 Figure 26 Figure 27 Figure 28 Figure 29 Figure 30 Figure 31 Omni 3600 Terminal Shipping Carton Components . . . . . . . . . . 9 Omni 3600 Terminal Features . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connect Omni 3600 Terminal Power Pack . . . . . . . . . . . . . . . . 11 Install the Smart Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Smart Battery Charge Indicator LEDs and Test Button . . . . . . . 14 Open the Printer Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Load Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Close the Printer Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Open the MSAM Access Door . . . . . . . . . . . . . . . . . . . . . . . . . . 17 MSAM Card Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 MSAM Cardholder Lock Plate Detail . . . . . . . . . . . . . . . . . . . . . 17 Insert MSAM Card into Cardholder . . . . . . . . . . . . . . . . . . . . . . 18 Remove SIM Door Screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Slide Off SIM Card Access Door . . . . . . . . . . . . . . . . . . . . . . . . 19 Insert SIM Card into Cardholder . . . . . . . . . . . . . . . . . . . . . . . . 19 Using the Primary Smart Card Reader . . . . . . . . . . . . . . . . . . . 20 Using the Magnetic Card Reader . . . . . . . . . . . . . . . . . . . . . . . . 20 Antenna Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Correct Antenna Position for Uplink . . . . . . . . . . . . . . . . . . . . . . 22 Omni 3600 Base Shipping Carton Contents . . . . . . . . . . . . . . . 23 Omni 3600 Base Features: Top . . . . . . . . . . . . . . . . . . . . . . . . . 24 Omni 3600 Base Features: Back (Telco models) . . . . . . . . . . . 24 Power Pack Connection (Docked Terminal) . . . . . . . . . . . . . . . 26 Spare Smart Battery Docking . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Omni 3600 Base Connection Ports . . . . . . . . . . . . . . . . . . . . . . 28 Direct Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Pass-through Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Example Peripheral Connections . . . . . . . . . . . . . . . . . . . . . . . . 30 Omni 3600 Terminal Information Label Locations . . . . . . . . . . . 38 Omni 3600 Base Information Label Locations . . . . . . . . . . . . . . 39 Smart Battery Information Label Locations . . . . . . . . . . . . . . . . 39 OMNI 3600 INSTALLATION GUIDE C ONTENTS OMNI 3600 INSTALLATION GUIDE CHAPTER 1 Introduction This guide describes how to set up and install an Omni 3600 terminal and Omni 3600 base. It also includes information on how to • protect the terminal from adverse Environmental conditions, • install and maintain the Smart Battery, • establish communications connections through the Omni 3600 Base Communications Ports, and • connect optional peripheral devices through the Omni 3600 base Peripheral Devices. Select a Location This section provides tips on using and protecting your Omni 3600 terminal, and location recommendations for the Omni 3600 base. Omni 3600 Terminal The Omni 3600 is a portable terminal for performing transactions remotely. Since it is a portable unit, location is not a factor however, follow the rules established in the Environment and Convenience sections. Omni 3600 Base A prime location for the Omni 3600 base is a counter or other flat surface that provides easy access to a power outlet and phone jack. Also, follow the rules established in the Environment and Convenience sections. Environment WARNING Do not leave this terminal in an non-climate-controlled vehicle. The Omni 3600 terminal is highly sensitive to temperature extremes. Subjecting the terminal to temperatures outside the stated operating range can void your warranty. • Do not use the Omni 3600 terminal or Omni 3600 base where there is moisture or high humidity, chemicals or oils, or excessive heat or dust. • Avoid locations near electrical appliances or other devices that emit excessive voltage fluctuations or electrical noise (for example, air conditioners, electric motors, neon signs, high-frequency or magnetic security devices, or computer equipment). • Never place the terminal in direct sunlight. OMNI 3600 INSTALLATION GUIDE I NTRODUCTION Select a Location CAUTION Do not use the Omni 3600 base outdoors. It is for indoor use only, and is not waterproof or dustproof. Damage to the unit from exposure to sun, rain, or dust may void your warranty. • Keep the Omni 3600 terminal and Omni 3600 base away from anything that radiates heat, such as a stove or motor. WARNING Do not use the Omni 3600 terminal or Omni 3600 base near water, including a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using these products during electrical storms. • Convenience Ensure when transmitting over the radio modem that you are not near appliances that emit a lot of electrostatic “noise,” (for example, refrigerators or generators) and that you are in an area where you have a “clear” radiofrequency path. Omni 3600 Terminal Keep the Omni 3600 terminal with you to perform transactions. When plugging the Omni 3600 terminal into the power pack, ensure that the unit is placed close enough to a power outlet so that the power cable readily reaches the unit. For safety, do not string the power cable in a walkway or place across a walkway on the floor. Omni 3600 Base Locate the Omni 3600 base so that you can readily dock the Omni 3600 terminal on the cradle for recharging and downloading. Again, for safety, ensure that the power cable readily reaches the Omni 3600 base unit, so as not to trip or interfere in any way in a busy location. Safety Concerns Use the following guidelines to ensure your safety and the safety of others: • Do not string the power and phone cables in a walkway or place across a walkway on the floor. • Do not use the Omni 3600 terminal or Omni 3600 base near water, including a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. • Avoid using the Omni 3600 terminal or Omni 3600 base during electrical storms. WARNING Do not dispose of batteries in a fire. Li-ion batteries must be recycled or disposed of properly. Do not dispose of Li-ion batteries in municipal waste sites. • OMNI 3600 INSTALLATION GUIDE Use only batteries and power packs approved by VeriFone. CHAPTER 2 Omni 3600 Terminal This section discusses the features of the Omni 3600 terminal, including Unpack the Shipping Carton • providing power to the Omni 3600 terminal, • charging the smart battery, • installing paper, • installing MSAM cards, and • completing magnetic card and smart card transactions. Open the shipping carton and carefully inspect the contents for possible tampering or shipping damage (Figure 1). PAPER ROLL SMART BATTERY PACK OMNI 3600 TERMINAL POWER PACK POWER CABLE (REGIONAL) MOD10 ADAPTOR (OPTIONAL) Figure 1 Omni 3600 Terminal Shipping Carton Components 1 Remove the following items: • Omni 3600 terminal • Power pack and power cable (if present) • Roll of thermal printer paper • Battery pack • MOD10 adaptor (optional) 2 Remove all plastic wrap from the Omni 3600 terminal and components. 3 Remove the clear protective film from the display lens. OMNI 3600 INSTALLATION GUIDE O MNI 3600 TERMINAL Terminal Features WARNING Terminal Features Do not use a Omni 3600 terminal or Omni 3600 base that has been damaged or tampered with. Figure 2 illustrates the physical features of the Omni 3600 terminal. PRINTER DOOR RELEASE INTERNAL THERMAL PRINTER CARD SWIPE FUNCTION KEYS DISPLAY PROGRAMMABLE FUNCTION KEYS ALPHA KEY KEYPAD CANCEL/OFF KEY ENTER/ON KEY BACKSPACE KEY SMART CARD READER Figure 2 Omni 3600 Terminal Features Notice the following features of the Omni 3600 terminal shown in Figure 2: 10 • The display • Four types of keys: • A 12-key, telephone-style keypad • Eight function keys: four function keys, labeled F1 to F4, right display; four unlabeled, programmable function (PF) keys above the keypad • Three keys (icons at left) under the keypad (left-to-right: CANCEL/OFF, BACKSPACE, ENTER/ON) • An ALPHA key center above the keypad (see ALPHA Key, page 33) • The magnetic card swipe, above the display. The icon at left shows proper card orientation • Smart card reader, in the front of the unit. The icon at left shows proper card orientation • The internal thermal printer and door release • The smart battery pack installed in back of unit (Figure 4) OMNI 3600 INSTALLATION GUIDE O MNI 3600 TERMINAL Smart Battery • A SAM (security access module) access door, underneath the battery (Figure 9). The Omni 3600 terminal contains three micromodule-sized SAM (MSAM) cardholders to support multiple stored-value card programs or other merchant cards The Omni 3600 terminal is equipped with a tamper-evident label (on a screw hole on the case bottom). Power Port On the back of the Omni 3600 is one port—the power port. Use this port to connect the Omni 3600 to the power pack to recharge the battery through the unit Connect Power Pack To connect the Omni 3600 terminal to power: 1 Insert the round barrel connector (Figure 3) into the power port on the back of the terminal. 2 Insert the power cable into the power pack. 3 Plug the power pack into a wall outlet or surge protector. NOTE Install a power surge protector to protect against possible damage caused by lightning strikes and electrical surges. Figure 3 Connect Omni 3600 Terminal Power Pack WARNING Do not plug the power pack into an outdoor outlet. Smart Battery The Omni 3600 wireless terminal uses an Li-ion smart battery (see Accessories and Documentation for ordering information). The internal logic of the smart battery prevents both overcharging and undercharging (a fault condition in which the battery level goes well below the minimum acceptable charge and the battery becomes unusable). OMNI 3600 INSTALLATION GUIDE 11 O MNI 3600 TERMINAL Smart Battery CAUTION Note that a new Li-ion battery’s full performance is achieved only after two or three complete charge and discharge cycles. On initial use, allow the Omni 3600 smart battery to charge 4 hours, then fully discharge during normal operation, to ensure reliable battery operation. The following are features of the smart battery: • Two Li-ion cells • A fuel gauge module • NOTE • monitors state of charge (voltage and current), • communicates with the terminal (charge parameters and alarms to indicate full discharge), • determines full charge capacity (on charge cycle and uninterrupted discharge cycle), and • automatically shuts down when cell voltage is extremely low. A safety circuit • prevents cell damage from overcharge/over-discharge, • activates when the battery is left in an unused terminal for extended periods, and • resets when battery voltage reaches a preset threshold during the charge cycle. Conserve battery power by turning the Omni 3600 terminal off when not in use. If the terminal is not to be used for several days, remove the battery from the terminal as it continues to discharge even when the terminal is turned off. Refer to Spare Smart Battery Pack for smart battery instructions for the Omni 3600 terminal on the Omni 3600 base. NOTE Smart Battery Installation 12 The smart battery pack must be installed and holding a minimum of a 1% charge to operate the Omni 3600 terminal. The smart battery installs in a slot on the back of the terminal, as shown in Figure 4. The locking tab clicks when the battery is in place. The slot is keyed, so that there is only one way to insert the battery. OMNI 3600 INSTALLATION GUIDE O MNI 3600 TERMINAL Smart Battery Figure 4 Install the Smart Battery Smart Battery Removal To remove the smart battery, press the locking tab at the top of the battery and pull the smart battery from its slot. Smart Battery Charging On initial use, the smart battery must be fully charged and fully discharged through normal operation. After unpacking your Omni 3600 terminal, install the battery and connect the power pack to the unit for 4 hours. Disconnect the power pack and allow your Omni 3600 terminal to remain on until the smart battery completely discharges. Reconnect the power pack to the unit and allow the smart battery to recharge a maximum of 4 hours. It is also recommended that the smart battery receive a periodic full discharge. To ensure a full discharge, use the unit until the battery is fully drained. To determine the charge state of the battery, push the “test button” icon (shown in Figure 5) on the bottom of the battery. The bar LED status indicators on the battery each indicate 25% of the charge state. When the battery charge state reaches 10%, the E LED (Figure 5) blinks, indicating a low-charge state. The battery charge state displays at the bottom of the first copyright screen when the terminal is turned on. NOTE Conserve battery power by turning the Omni 3600 terminal off when not in use. If the terminal is not to be used for several days, remove the battery from the terminal as it continues to discharge even when the terminal is turned off. The smart battery has a safety circuit to protect the Li-ion cells from overcharging and over-discharging. If the battery is over-discharged, the safety circuit shuts down the battery and none of the indicator LEDs (see Figure 5) on the battery pack blink. The battery must then be recharged to restore operation. NOTE The Omni 3600 terminal automatically shuts off when the smart battery reaches the critically low charge state. If this occurs, the smart battery must recharge a minimum of 1/2 hour before it can power the terminal. It make take several recharge attempts to reset the safety circuit when charging a smart battery that has reached a critically low charge state. OMNI 3600 INSTALLATION GUIDE 13 O MNI 3600 TERMINAL Turn On/Off the Omni 3600 Terminal If the Omni 3600 terminal is already running an application (for example, SoftPay), a battery status indicator may appear on the display. BATTERY CHARGE STATE TEST BUTTON AND STATUS INDICATOR LEDS Figure 5 Smart Battery Charge Indicator LEDs and Test Button NOTE It is recommended that you keep a spare, charged smart battery available. Smart Battery Life To ensure that you get the longest possible performance from the smart battery, it must be allowed to fully discharge periodically. The smart battery can be charged and discharged hundreds of times, but will eventually wear out. When operating times are noticeably shorter than usual, it is time to buy a new battery (see Accessories and Documentation for ordering information). WARNING Do not dispose of batteries in a fire. Li-ion batteries must be recycled or disposed of properly. Do not dispose of Li-ion batteries in municipal waste sites. Turn On/Off the Omni 3600 Terminal When the smart battery completes its initial charge, turn on the Omni 3600 terminal by pressing the green ENTER/ON key (icon at left) for approximately 3 sec. The display screen lights and displays the initial VeriFone copyright screen. If an application is loaded in the terminal, it starts after the initial VeriFone copyright screen and displays a unique (copyright) screen. If no application is loaded in the terminal, DOWNLOAD NEEDED appears on screen after the initial VeriFone copyright screen. Turn off the Omni 3600 terminal by pressing the red CANCEL/OFF key (icon at left) continuously until the cancel tone is heard (approximately 4 sec.). First a series of beeps is heard, then the cancel tone. The unit then shuts off. Paper Installation WARNING 14 The internal thermal printer uses a roll of single-ply, thermal-sensitive paper 58 millimeters (2.25 inches) wide and 25 meters (82 feet) long. A pink out-of-paper indicator line appears on the edge of the paper approximately 18 inches before the end of the roll. After this line appears, there is enough paper remaining on the roll to conclude at least one transaction. Poor-quality paper may jam the printer. Order high-quality paper from VeriFone; refer to the ordering process listed in Accessories and Documentation. OMNI 3600 INSTALLATION GUIDE O MNI 3600 TERMINAL Paper Installation CAUTION Store thermal paper in a dry, dark, cool place. Handle thermal paper carefully; impact, friction, high temperatures, humidity, light, and oils affect the color and storage characteristics. To install the paper roll in the internal thermal printer: 1 Lift paper roll cover tab to unlock the printer door (Figure 6). 2 Rotate the printer door up and back. Note that the door is hinged; it is not necessary to remove it from the unit. Figure 6 Open the Printer Cover 3 Loosen the glued leading edge of the paper from the roll. 4 Hold the paper roll so paper feeds from the bottom (Figure 7) and pull approximately two inches of paper free of the roll. 5 Drop the paper roll into the printer tray, allowing the free paper to extend outside the printer door (Figure 7). Figure 7 Load Paper 6 Close the cover by gently pressing directly on the paper roll cover tab until it clicks shut. Allow a small amount of paper to extend outside the cover, as shown in Figure 8. OMNI 3600 INSTALLATION GUIDE 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2003:08:04 15:35:51-06:00 Create Date : 2003:08:04 15:35:25-06:00 Title : Untitled Document Creator : FrameMaker 6.0 Producer : Acrobat Distiller 5.0.5 (Windows) Page Count : 15 Mod Date : 2003:08:04 15:35:51-06:00 Creation Date : 2003:08:04 15:35:25-06:00 Metadata Date : 2003:08:04 15:35:51-06:00EXIF Metadata provided by EXIF.tools