Verifone OMNI3600D Point of Sale Terminal User Manual 22475rE

Download:
Mirror Download [FCC.gov]
Document ID	370921
Application ID	c/TTycYtEbNSWTX1Q9jK6w==
Document Description	User Manual Part V
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	47.03kB (587936 bits)
Date Submitted	2003-11-04 00:00:00
Date Available	2003-11-04 00:00:00
Creation Date	2001-03-06 09:54:13
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-10-21 11:06:39
Document Title	22475rE.fm
Document Creator	FrameMaker 6.0
Document Author:	Cherie_W1

VeriFone, Inc.
2455 Augustine Drive
Santa Clara CA 95054-3002
Tel: 800-VeriFone (837-4366)
www.verifone.com
Omni 3600 Certifications and Regulations
FCC Compliance
Manufacturer: VeriFone, Inc.
Separate Power Sources
Model: Omni 3600
Some peripherals require a separate power source. Before connecting a check reader or similar device, turn off power to the
terminal.
FCC Part 15 Class B
Peripherals
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Before connecting any peripheral device, turn off power to the terminal. Turn on power only after you are finished connecting the
peripheral device(s). For complete information about peripheral installation and use, please refer to the user documentation
supplied with those devices.
SAR Labeling
Disconnecting Power
Mobitex
USA
Disconnecting power during a transaction may cause transaction data files that are not yet stored in terminal memory to be lost.
Surge Protectors
To protect your terminal against possible damage caused by lightning strikes and electrical surges, you may want to install a power
surge protector.
Location – Electrical Considerations
CAUTION: Due to risk of electrical shock or terminal damage, do not use the terminal near water, including a bathtub, wash bowl,
kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Also, avoid using this product during electrical storms.
Avoid locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for
example, air conditioners, neon signs, high-frequency or magnetic security devices, or electric motors).
Equipment
To comply with the FCC RF exposure requirements, bystanders and parts of the users body other then the extremities must be at
least 15.0mm away from the device.
CDMA
USA
SAR compliance for body worn operating configurations is limited to the specific belt clips / holsters / accessories that have no
metallic component in the assembly. The highest reported SAR values for Omni 3600C under the FCC ID B32OMNI3600C are:
PMS modes (Part 22) – Body-worn 0.0056mW/g. The highest reported SAR values for Omni 3600D under the FCC ID
B32OMNI3600D are: PMS modes (Part 22) – Body-worn 0.309mW/g, PCS mode (Part 24) - Body-worn: 0.232mW/g.
Brazil
"""O terminal Omni 3600 atende aos limites da Taxa de Absorção Específica referente à exposição a campos elécticos, magnéticos
e electromagnéticos de radiofreqüências adoptados pela Anatel."""
GSM/GPRS
Damage
USA
Carefully inspect the shipping carton and its contents for any damage. If the terminal or any product component appears damaged
or tampered with, immediately notify the shipping company and your VeriFone distributor or service provider.
CAUTION: Do not use a terminal that has been damaged or tampered with.
Repairs
Unless otherwise instructed in this document, do not, under any circumstances, attempt any service, adjustments, or repairs on this
equipment. Instead, contact your local VeriFone distributor or service provider for assistance. Failure to comply may invalidate the
product warranty.
SAR compliance for body worn operating configurations is limited to the specific belt clips / holsters / accessories that have no
metallic component in the assembly. The highest reported SAR values under this FCC ID are: PMS modes (Part 22) – Body-worn
0.245mW/g, PCS mode (Part 24) - Body-worn: 0.218mW/g.
Australia Required Warning Statement
Please switch off and do not operate the equipment when in an area with a potentially explosive atmosphere, such as refueling
points, fuel depots or storage areas, chemical plants, and blasting operations.
Electrical
Location – Environmental Considerations
LI-ion Battery Module—Rechargeable Battery Unit Caution
Do not plug the power pack into an outdoor outlet or operate the terminal outdoors. It is not waterproof or dustproof, and is for
indoor use only. Any damage to the unit from exposure to rain or dust may void your warranty.
Do not use the terminal where there is high heat, dust, humidity, moisture, or caustic chemicals or oils. Keep the terminal away from
direct sunlight and anything that radiates heat, such as a stove or a motor.
Do not:
• disassemble, crush, puncture, or incinerate in fire.
• short circuit contacts.
• expose to temperatures exceeding 140°F (60°C).
Cleaners and Solvents
Power Packs
Never use thinner, trichloroethylene, or ketone-based solvents to clean the terminal — they may deteriorate plastic or rubber parts.
Do not spray cleaners or other solutions directly onto the keypad or display. For best results, use a VeriFone Cleaning Kit or a clean
cloth dampened with water and mild soap. To remove stubborn stains, use alcohol or an alcohol-based cleaner.
Before you connect the terminal power pack to an electrical outlet, check that the on/off power switch on the terminal is off. If the
terminal does not have an on/off switch, check that the power cable connector is removed from the terminal’s power port.
Location – Ease of Use
When connecting the terminal to a power pack, always connect the three-pronged plug of the power pack to an electrical wall outlet
first. Then connect the power cable to the terminal’s power port.
Select a location for your terminal that contributes to its ease of use:
• A location convenient for both merchant and cardholder.
• A flat support surface, such as a countertop or table.
• A location near a power outlet and a telephone/modem line connection.
AC Adapter
WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
Omni 3600 Certifications and Regulations
VeriFone Part Number: 22475 Revision E
 2003 VeriFone, Inc. All rights reserved.
or
The AC adapter is designed to ensure your personal safety and to be compatible with this equipment. Please follow these
guidelines:
• Do not use the adapter in a high moisture environment. Never touch the adapter when your hands or feet are wet.
• Allow adequate ventilation around the adapter. Avoid locations with restricted airflow.
• Connect the adapter to a proper power source. The voltage and grounding requirements are found on the product case and/or
packaging.
• Do not use the adapter if the cord becomes damaged.
• Do not attempt to service the adapter. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to
excess moisture.
continued
Omni 3600 GPRS Declaration of Conformity
Omni 3600 GSM Declaration of Conformity

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:10:21 11:06:39-06:00
Create Date                     : 2001:03:06 09:54:13Z
Page Count                      : 2
Creation Date                   : 2001:03:06 09:54:13Z
Mod Date                        : 2003:10:21 11:06:39-06:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Cherie_W1
Metadata Date                   : 2003:10:21 11:06:39-06:00
Creator                         : Cherie_W1
Title                           : 22475rE.fm

EXIF Metadata provided by EXIF.tools