Verifone RF250 RFID device that is part of a point of sale termin User Manual Rf250 a 18

Download:
Mirror Download [FCC.gov]
Document ID	24148
Application ID	0SAFHh/jCDCfhIIl4Dwkcg==
Document Description	Installation Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.72kB (221453 bits)
Date Submitted	1999-02-19 00:00:00
Date Available	1999-03-16 00:00:00
Creation Date	1998-09-18 09:52:38
Producing Software	Acrobat Distiller 3.01 for Windows
Document Lastmod	1998-09-18 10:02:32
Document Title	Rf250-a.18
Document Creator	FrameMaker 5.5P4f

Mobil Indoor Speedpass
Installation Guide
P/N: 55225
Revision A
Mobil Indoor Speedpass Installation Guide
September 11, 1998
VeriFone®, Inc.
4988 Great America Parkway
Santa Clara, CA 95054-1200
Telephone: 408-496-0444
http://www.verifone.com
Printed in the United States of America.
© 1998 by VeriFone, Inc. All rights reserved.
No part of this publication covered by the copyrights herein may be
reproduced or copied in any form or by any means — graphic,
electronic, or mechanical, including photocopying, taping, or
information storage and retrieval systems — without written permission
of the publisher.
The content of this document is subject to change without notice. The
information contained herein does not represent a commitment on the
part of VeriFone, Inc.
Publications are not stocked at the address given above. Requests for
VeriFone publications should be made to your VeriFone representative.
VeriFone is a registered trademark of VeriFone, Inc. Speedpass is a
trademark of Mobil Oil Corporation. All other products mentioned in
this manual are trademarks or registered trademarks of their respective
owners.
Mobil Indoor Speedpass Installation Guide
Revision History
Revision
Date
September 11, 1998
Comments
Initial release of software
and documentation.
FCC Compliance
This equipment complies with the requirements in Part 15 of FCC
rules for a Class A computing device. Operation of this equipment
in a residential area may cause unacceptable interference for radio
and TV reception requiring the operator to take whatever steps
necessary to correct the interference.
Safety Instructions
■
Read all instructions contained in this guide before making
any equipment connections.
■
Save these instructions for later use.
■
Unplug the unit before servicing or cleaning. Do not use
liquid or aerosol cleaners. Use only a damp cloth for
cleaning.
■
Do not use any attachments not specifically recommended
by VeriFone as they may result in the risk of fire, electric
shock, or injury to persons.
■
Do not use the unit near water.
■
Do not place the unit on an unstable cart, stand, or table.
The unit may fall, causing serious personal injury and/or
damage to the equipment.
Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Unpacking. . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Installation Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Equipment Power Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. Specifications. . . . . . . . . . . . . . . . . . . . . . . . .9
Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Service and Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Contents ◆ i
ii ◆ Contents
1
Introduction
This document provides the information necessary to install your
Mobil Indoor Speedpass System.
nmobilind.wmf 125%
Mobil Indoor
Speedpass
Soft Key Guard
Card Swipe Guard
Multicable
Power Supply
The Mobil Indoor Speedpass System is a self-contained device,
when properly installed, becomes an integral part of the POS
equipment. It has the ability of reading a retail customer’s tag when
placed near an antenna mounted on the face of the equipment.
Introduction ◆ 1
Information from the tag is processed and transferred to POS
equipment.
2 ◆ Introduction
2
Unpacking
Carefully inspect the shipping carton and its contents for any
damage that may have occurred during shipment. If anything
appears damaged, immediately file a claim with the shipping
company or carrier and notify the Point of Sales equipment
manufacturer.
Warning:
Never use damaged equipment. A shock or fire
hazard may exist if equipment is energized in a
damaged condition.
Remove the following items from the shipping carton:
■
Mobil Indoor Speedpass Unit with attached Mulitcable
■
Power Supply
■
Soft Key Guard
■
Card Swipe Guard
Remove any protective plastic wrapping from the components and
place them on a table or countertop.
Retain the shipping carton and any packing material in case it is
necessary to move components from one location to another or to
return the equipment for service.
Unpacking ◆ 3
4 ◆ Unpacking
3
Installation
Unpack equipment in accordance with instructions listed in Chapter
2.
Warning:
To reduce the risk of fire, do not place this unit near
any heat producing source.
When selecting a location for your Mobil Indoor Speedpass
equipment, avoid areas having:
■
Direct sunlight or objects that produce heat.
■
Excessive dust.
■
Electrical “noise” or devices that cause excessive voltage
variations such as air conditioners, fans, or high frequency
security systems.
Installation Procedures
Use the following procedures to install and power up the Mobil
Indoor Speedpass.
1.
Place the unit close to the POS equipment.
2.
Uncoil the Multicable and ensure that it does not kink or is
not placed under heavy equipment.
3.
Uncoil the Power Supply cable.
4.
Mount the unit on a custom stand, if applicable.
Installation ◆ 5
5.
Locate the RS232 and RS485 cabling from the POS
equipment.
6.
Insert the RS232 cable connector into the Multicable jack
labeled PORT 1.
7.
Insert the RS485 cable connector into the Multicable jack
labeled PORT 3.
Equipment Power Up
Before installing your Mobil Indoor Speedpass equipment, a
quality surge protector should be purchased to protect the
equipment from voltage surges. Ideally, the Mobil Indoor
Speedpass equipment and the POS equipment should have its own
dedicated AC power outlet. The surge protector is plugged into the
AC power outlet first. The Mobil Indoor Speedpass Power Supply
should then be plugged into the surge protector.
Use the following procedures to power up the Mobil Indoor
Speedpass unit:
1.
Insert the Power Cable connector into the Multicable jack
labeled POWER.
Warning:
6 ◆ Installation
When the Power Supply is plugged into the AC power
outlet, voltage is immediately available to the Mobil
Indoor Speedpass. Avoid handling the exposed power
cable connector.
Note:
The AC power outlet should be easily accessible
should the user desire quick power disconnect.
2.
Connect the Power Supply to the AC power outlet or
appropriately configured power connector.
3.
Verify that the display is activated.
Warning:
To turn off your Mobil Indoor Speedpass, always
unplug the power supply from the AC power outlet
first. This eliminates the presence of voltage at the
Multicable power receptacle and the potential shock
hazard.
Installation ◆ 7
8 ◆ Installation
4
Specifications
Power Requirements
■
Input Voltage : 120VAC 60Hz 18 W
■
Output Voltage: 12VDC 1000mA
Operating Environment
■
Temperature: 0 to 40 degrees C (32 to 104 degrees F)
■
Humidity: 20% to 90%, noncondensing
Service and Repair
Do not, under any circumstances, attempt to repair, service, or
adjust your Mobil Indoor Speedpass equipment. If you have any
problems with your unit, contact the manufacturer of your POS
equipment.
Specifications ◆ 9
Cleaning
Routine cleaning can be accomplished by removing dust or dirt
with a clean, damp cloth and mild soap or detergent. Use a cloth
dampened with alcohol for more stubborn stains.
Warning:
Never use thinner, trichloroethylene, or ketone based
solvents to clean this equipment or cabling as they
may deteriorate plastic parts.
10 ◆ Specifications

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 1998:09:18 09:52:38
Producer                        : Acrobat Distiller 3.01 for Windows
Title                           : Rf250-a.18
Creator                         : FrameMaker 5.5P4f
Modify Date                     : 1998:09:18 10:02:32
Page Count                      : 16
Page Mode                       : UseNone

EXIF Metadata provided by EXIF.tools