Verifone V205CCTLS Mobile Point of Sale Terminal User Manual V205c Certifications and Regulations Sheet VPN DOC470 101 EN A Revision A
VeriFone Inc Mobile Point of Sale Terminal V205c Certifications and Regulations Sheet VPN DOC470 101 EN A Revision A
Verifone >
Contents
- 1. DOC470_101_EN_A_V205c_Certifications & Regulations
- 2. DOC470_103_EN_A_V205c_Installation_Guide
- 3. DOC470_101_EN_A_V205c_Certifications_and_Regulations
DOC470_101_EN_A_V205c_Certifications_and_Regulations
![](/img.php?id=3753513&img=bg1.png)
Verifone, Inc.
1-800-Verifone
www.verifone.com
V205c CTLS Certifications and Regulations
Verifone Part Number: DOC470-101-EN-A Revision A
© 2017 Verifone, Inc. All rights reserved. *DOC470-101-EN-A*
Electrical
Separate Power Sources
Please ensure you review the power output of any device you connect to the V205c CTLS.
NOTE: The reference input power rating for the V205c CTLS is as follows: 8.0 V DC, 2.25 A.
Location – Electrical Considerations
CAUTION: Due to risk of electrical shock or unit damage, do not use the unit near water, including a bathtub, wash bowl, kitchen sink or laundry
tub, in a wet basement, or near a swimming pool. Also, avoid using this product during electrical storms.
Avoid locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for
example, air conditioners, neon signs, high-frequency or magnetic security devices, or electric motors).
Du fait d'un risque d'électrocution ou d'une détérioration du terminal, ne pas utiliser cet équipement près d'une source d'eau, par
exemple près d'une baignoire, d'un lavabo, d'un évier de cuisine ou d'un bac de lavage, dans un sous-sol humide ou à proximité d'une
piscine. De même, éviter d’utiliser ce produit lors des orages provoquant des coupures électriques. Éviter de placer le terminal à
proximité d’appareils électriques ou autres unités pouvant entraîner des fluctuations de tension importantes ou des interférences
électriques, tels que les climatiseurs, enseignes au néon, dispositifs de sécurité à haute fréquence ou équipements électriques.
Equipment
Location – Environmental Considerations
This device is for indoor use only. Do not operate the device outdoors; it is not waterproof nor dust proof. Any damage to the unit from
exposure to rain or dust may invalidate the product warranty. Keep the device away from dust, humidity, moisture, caustic chemicals or oils,
direct sunlight, high heat and anywhere that radiates heat such as a stove or a motor.
WARNING! Your device contains sensitive electronic components that can be permanently damaged if exposed to excessive shock or vibration. To
minimize the risk of damage to your device, avoid dropping your device and operating it in high-shock and high-vibration
environments. Do not store the device where prolonged exposure to extreme temperature can occur, because it can cause permanent
damage. Do not expose the device to water. Contact with water can cause this unit to malfunction.
Votre terminal de point de vente contient des composants électroniques sensibles, susceptibles de subir des dommages définitifs en
cas d'exposition à des chocs ou à des vibrations excessives. Pour minimiser le risque de dommages pour votre terminal, éviter de le
faire tomber ou de l'exposer à des environnements pouvant provoquer des chocs et des vibrations excessives. Ne pas stocker le
terminal dans des lieux susceptibles d'entraîner une exposition prolongée à des températures extrêmes, du fait des dommages
définitifs que cette situation peut provoquer. Ne pas exposer le terminal à l'eau. Un contact avec de l'eau peut provoquer un
dysfonctionnement de l'unité.
Telecom
This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.
The Ringer Equivalence Number (REN) is an indication of the maximum number of devices allowed to be connected to a telephone interface.
The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the
devices not exceed five.
Le présent matériel est conforme aux specifications techniques applicables d'Innovation, Science and Economic Development Canada.
L'indice d'équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être raccordés à une interface
téléphonique. La terminaison d'une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition que la somme
d'indices d'équivalence de la sonnerie de tous les dispositifs n'excède pas cinq.
Repairs
Do not, under any circumstances, attempt any service, adjustments, or repairs on this equipment. Instead, contact your local Verifone
distributor or service provider for assistance. Failure to comply may void the product warranty.
V205c CTLS Certifications and Regulations
FCC Compliance
The following device has been tested and certified as compliant with the regulations and guidelines set forth in Part 15 of FCC Rules:
Manufacturer: Verifone, Inc.
Brand: V205, Model: V205c CTLS
Part 15 of FCC Rules
This device complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules which provide reasonable protection
against harmful interference in a residential installation. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment generates and uses radio frequency energy, and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. In the
unlikely even that there is interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by doing any of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly approved by Verifone could void the user’s authority to operate this equipment.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Cet équipement est conforme aux limites d'un dispositif numérique de classe B, comme stipulé dans la partie 15 des règles FCC, qui prévoient
une protection raisonnable contre les interférences nocives dans une zone résidentielle. Le fonctionnement est soumis aux deux conditions
suivantes:
(1) Ce dispositif ne peut pas provoquer d'interférences nocives, et
(2) Ce dispositif doit accepter la réception d'interférences éventuelles, y compris des interférences susceptibles de provoquer un
fonctionnement inattendu.
Cet équipement produit et utilise l'énergie des ondes radio et, s'il n'est pas installé et utilisé conformément aux présentes instructions, peut
provoquer des interférences nuisibles pour les communications radio. Toutefois, aucune garantie n'est donnée que des interférences ne se
produiront pas dans une installation particulière.
Dans l'éventualité improbable d'une interférence avec la réception d'ondes de radio ou de télévision (pouvant être déterminée en éteignant et
en rallumant l'équipement), il est conseillé à l'utilisateur d'essayer de corriger l'interférence en appliquant une ou plusieurs des mesures
suivantes:
• Réorienter ou déplacer l'antenne de réception.
• Augmenter la distance entre l'équipement et le récepteur.
• Connecter l'équipement à une sortie de circuit différente de celle à laquelle est connecté le récepteur.
• Consulter le fournisseur ou demander l'aide d'un technicien expérimenté dans le domaine de la radio et/ou de la télévision.
Tout changement ou modification apportés à cet équipement, non approuvé de manière expresse par Verifone, est susceptible d'entraîner le
retrait de l'autorisation de l'utilisateur à utiliser cet équipement. L'antenne ou les antennes utilisées pour cet émetteur ne doivent pas être
placées côte à côte ou fonctionner conjointement à une autre antenne ou à un autre émetteur.
Legal Terms and Conditions Regarding PCI SSC Approvals
PCI SSC’s approval only applies to PEDs that are identical to the PED tested by a PCI Security Standards Council recognized laboratory.
If any aspect of the PED is different from that which was tested by the laboratory, even if the PED conforms to the basic product description
contained in the letter, then the PED model should not be considered approved, nor promoted as approved. For example, if a PED contains
firmware, software, or physical construction that has the same name or model number as those tested by the laboratory, but in fact are not
identical to those PED samples tested by the laboratory, then the PED should not be considered or promoted as approved.
No vendor or other third party may refer to a PED as “PCI Approved,” nor otherwise state or imply that PCI SSC has, in whole or part, approved
any aspect of a vendor or its PEDs, except to the extent and subject to the terms and restrictions expressly set forth in a written agreement with
PCI SSC, or in an approval letter. All other references to PCI SSC’s approval are strictly and actively prohibited by PCI SSC.
When granted, an approval is provided by PCI SSC to ensure certain security and operational characteristics important to the achievement of
PCI SSC’s goals, but the approval does not under any circumstances include any endorsement or warranty regarding the functionality, quality,
or performance of any particular product or service. PCI SSC does not warrant any products or services provided by third parties. Approval
does not, under any circumstances, include or imply any product warranties from PCI SSC, including, without limitation, any implied warranties
of merchantability, fitness for purpose or non-infringement, all of which are expressly disclaimed by PCI SSC. All rights and remedies regarding
products and services, which have received an approval, shall be provided by the party providing such products or services, and not by PCI
SSC or the payment brand participants.
This equipment operates on a secondary basis, and must not cause interference to systems operating on a primary basis. As secondary
equipment, it is not protected from harmful interference, even from stations of the same type.
Industry Canada Class B Emission Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée
aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
RF Exposure
This equipment complies with FCC, Canadian and European limits for RF exposure from hand operated wireless devices.
Cet équipement est conforme aux limites FCC, canadiennes et européennes pour l'exposition aux RF des appareils sans fil à commande
manuelle.
Recycling: DO NOT DISCARD!
UNIT MUST BE RECYCLED OR DISPOSED OF PROPERLY
For proper disposal instructions go to http://recycle.verifone.com/ Please retain this sheet for future reference.
continued on rear cover
![](/img.php?id=3753513&img=bg2.png)
V205c CTLS Declaration of Conformity
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
______________________________________________________________________
Manufacturer’s Name Verifone, Inc.
Manufacturer’s Address Verifone, Inc.
88 West Plumeria Drive
San Jose CA 95134, USA
Declares, that the products
Product Name: V205
Model Name: V205c CTLS
Model Number: M470-XXX-XX-XXX-X
Brand: Verifone
Product Options:All
Conform to the following product specifications:
Safety: IEC 60950-1:2005 + A1:2009 + A2:2013
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
EMC: EN 55032:2015 + AC:2016, Class B
EN 61000-3-2:2014, Class A
EN 61000-3-3:2013
EN 55024:2010 + A1:2015
EN 301 489-1 V2.2.0
EN 301 489-3 V2.1.1
RF (RFID): EN 301 489-1 V2.2.0
EN 301 489-1 V2.1.1
EN 300 330 V2.1.1
Telecom: ETSI ES 203 021-2 V2.1.2
ETSI ES 203 021-3 V2.1.2
SAR: EN 50566:2013
IEC/EN 62479 Annex A
Supplementary Information:
We hereby declare that the devices comply with the requirements of Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU,
and Radio Equipment Directive 2014/53/EU (RED). These products carry the CE Mark per Directive 93/68/EEC and conform to RoHS
Directive 2011/65/EU, including Technical Documentation: EN50581:2012 and DIN EN 50581 (2013-02).
CE Approval Date: September 22, 2017
Sheetal Shah
Chief Operations Officer, Global Supply Chain
San Jose, CA, USA
European contact for regulatory topics only: Verifone UK Ltd.
Symphony House
7 Cowley Business Park
High Street
Cowley Uxbridge, UB8 2AD
United Kingdom
Tel: +44-1895-275275