Vertu RM-389V Quad Band Phone User Manual Constellation F Reference Manual

Vertu Quad Band Phone Constellation F Reference Manual

UserManual.wiki >

RM-389V User Manual >

User manual Part 2

Contents

User manual Part 2

MESSAGESEnglish24To call your voice mailbox:From the Home screen, press Menu » Messages » Voice messages » Listen to voice msgs. Or, press and hold the 1 key on the number keypad.To enter, search for or edit your voice mailbox number:From the Home screen, press Menu » Messages » Voice messages » Voice mailbox no.Info messagesWith the Info messages network service, you can receive messages on various topics from your service provider.To check availability, topics, and the relevant topic numbers, contact your service provider.Service messagesYour Vertu phone is able to receive service messages (pushed messages) sent by your service provider. Service messages are notifications (for example, news headlines), and they may contain a text message or an address of a service.When you receive a service message:1. Press Show to display the message.2. Or, press Exit to save the message to your inbox. Service message settingsTo update service message settings:1. From the Home screen, press Menu » Messages » Message settings » Service messages.2. Scroll to one of the following options and then press Select:Service messages » On or Off to set whether you want to receive service messagesMessage filter » On to set the phone to receive service messages only from content authors approved by the service providerAutom. connection » On to set the phone to automatically activate the browser from the stand-by mode when the phone has received a service message. If you select Off, the phone activates the browser only after you select Retrieve when the phone has received a service message.Bluetooth messagesBusiness cards, notes and messages sent by Bluetooth are available in the Messages inbox.Service commandsUse the service commands editor to enter and send service requests (also known as USSD commands) to your service provider. Contact your service provider for information about service commands.To send a service command:1. From the Home screen, press Menu » Messages » Serv. commands.2. Use the NUMBER keys to enter a service request, for example an activation command for a specific network service and press Send.The first time you access your voice mailbox, you may be required to enter a voice mailbox number, depending on your operator.

CONTACTSEnglish254 CONTACTSYour Vertu phone Contacts list has capacity for up to 2,000 entries. Contacts memoryContact names and numbers can be stored in the phone memory or on the SIM card, or both.Phone memoryEach contact can contain up to five numbers and five text items, for example a postal address, an e-mail address, an image and a specific ring tone.If you use the phone memory you can store more data and access more functions, for example voice tags, than if you use the SIM card memory.SIM card memoryContacts stored on your SIM card have one associated number. The number of contacts and the length of names and numbers that you can store on your SIM card is determined by your service provider.Selecting the memory typeCertain features, for example business cards and multiple numbers associated with a contact, are only available when using the phone memory. If you plan to make frequent use of these features, we recommend that you set your Vertu phone to use the phone memory. If you plan to transfer your SIM card from your Vertu phone to other phones, we recommend that you set your Vertu phone to use the SIM card memory.To select a memory type:1. From the Home screen, press Menu » Contacts » Settings » Memory in use.2. Scroll to one of the following options and then press Select: Phone and SIM to save new contacts to the phone and display contacts from the phone and SIMPhone to save and display phone contactsSIM card to save and display SIM card contacts.A message confirms which memory you have selected.Copying between memoriesThe copying feature allows you to copy names and numbers between the phone memory and the SIM card memory.1. From the Home screen, press Menu » Contacts » Copy contacts.2. Scroll to one of the following options and then press Select:From SIM to phone to copy all information from the SIM card memory to your Vertu phone memoryFrom phone to SIM to copy the name and the number from your Vertu phone memory to the SIM card memory.3. Press Yes to confirm your action, or press No to cancel.Move between memoriesThe move feature enables you to move contact names and numbers from the phone to the SIM card memory and vice versa. 1. From the Home screen, press Menu » Contacts » Move contacts.2. Scroll to one of the following options and then press Select:From SIM to phone to move all information from the SIM card memory to your Vertu phone memory. The information is no longer held on your SIM cardFrom phone to SIM to move the name and the number from your Vertu phone memory to the SIM card memory. The information is no longer held in your Vertu phone memory3. Press Yes to confirm your action, or press No to cancel.Copying individual numbersYou can also copy individual directory numbers between the phone memory and SIM card memory directly from the contacts list.To copy individual numbers:1. From the Home screen, press Menu » Contacts » Names.2. If the contact name is not visible, press the first letter of the contact name. The first name starting with that letter is highlighted. Scroll to the desired name and press Details.3. Press Options » Copy number.4. Select Keep original and then press Select to keep the contacts in both memories.5. Or select Move original and then press Select to delete the original information.A message confirms that the number has been copied.If you change the SIM card in your Vertu phone, the memory type is automatically reset to phone.If you are copying from phone memory to SIM card memory and your Vertu phone memory contains more entries than your SIM card can store, some of the entries will not be copied.

CONTACTSEnglish26Check memory statusYou can check your Vertu phone's memory to see how much information is stored and how much free space is available.To check the memory status:1. From the Home screen, press Menu » Contacts » Settings » Memory status.2. Scroll to either Phone or SIM card and then press Select.If Phone is selected the phone's contact free memory and used memory is displayed as a percentage of the available memoryIf SIM card is selected the absolute number of free contacts and contacts in use for the SIM card is displayed.3. Press Back to exit the screen.Adding contactsTo add a contact:1. From the Home screen, press Menu » Contacts » Add new. 2. Press Select and then use the NUMBER keys to enter the contact’s first name. Scroll down to the next field.3. Use the NUMBER keys to enter the contact’s last name. Scroll down to the next field.4. Use the NUMBER keys to enter the mobile phone number. Scroll down to the next field.5. Use the NUMBER keys to enter the home phone number. Scroll down to the next field.6. Use the NUMBER keys to enter the email address. Scroll down to the next field.7. Scroll right or left to open the image gallery and select an image to associate with this contact.8. Select Save to confirm your entry, or press Cancel.A message confirms which memory you have saved the contact details to.Accessing contactsThere are several ways to access a contact, giving you flexibility to use your Vertu phone in the way that suits you best. A: Follow menu path1. From the Home screen, press Menu » Contacts » Names.2. Key in the first letter of the contact name. 3. The first name starting with that letter is highlighted. 4. Scroll to the desired name.B: Go to commandIf your contacts is one of the most used functions on your phone, Names is displayed in the Go to shortcut menu (see “My shortcuts” on page 36). You can use the left SELECTION key to open the shortcut menu and display your contacts list:1. From the Home screen, press Go to » Names.2. Key in the first letter of the contact name. 3. The first name starting with that letter is highlighted. 4. Scroll to the desired name.C: Selection keyIf your right SELECTION key has been configured as Names (see “My shortcuts” on page 36) you can use the following method to display your contacts list:1. From the Home screen, press the right SELECTION key.2. Key in the first letter of the contact name. 3. The first name starting with that letter is highlighted. 4. Scroll to the desired name.Deleting contactsTo delete a contact:1. Select your contact name as in “Accessing contacts”.2. Press Options » Delete» Delete contact.3. Press Yes to confirm deletion.A message confirms which contact you have deleted.SIM card memory capacity is defined by your SIM card, not by your Vertu phone. For more information contact your service provider.The following instructions use Method A to access your contact name list however, the other methods can be used if your SELECTION keys have been configured correctly.

CONTACTSEnglish27Contact number and text typesThe first number added to a contact is automatically set as the default number. When you select a contact to call or send a message to, this default number is always used. You can store different numbers for each contact from the following types:>General>Work>Mobile>Home>FaxYou can also store multimedia information, E-mail address and Web address..Multimedia information Tone, Image and Video can be stored. Personal information, for example , Postal address, Company, User ID, Job title, Birthday, Formal name, Nickname, Note can be included.Adding information to a contactYou can add phone numbers or text items to a contact.To add a number to a contact:1. Select your contact name as in “Accessing contacts”. 2. With the contact name highlighted, press Details.3. Press Options.4. Scroll to Add detail and press Select.5. Scroll to Number and press Select.6. Scroll to the type of number you want to add and then press Select.7. Key in the phone number.8. Press Next until the Save option appears. Press Save to confirm the number, or press Options and scroll to Save. Press Select to confirm.A message confirms that the details have been saved to the phone memory.Alternatively, 1. Enter the telephone number and press Save.2. Press Options. 3. Press Add to contact. 4. Scroll to the required contact and press Add.5. Scroll to the type of number you want to add and then press Select.A message confirms that the details have been saved to the phone memory.To add a text item to a contact:1. Select your contact name as in “Accessing contacts”.2. With the contact name highlighted, press Details.3. Press Options.4. Scroll to Add detail and then press Select.5. Scroll to the type of text you want to add, for example, Web address or Nickname, and then press Select.6. Key in the text and press Next until the Save option appears. Press Save to confirm the number, or press Options and scroll to Save. Press Select to confirm.A message confirms that the details have been saved to the phone memory.Changing the default numberThe first number you add to a contact is automatically set as the default number. If more than one number is added to an entry, for example if the contact has a mobile phone number and an office number, you can change the default number.To change the default number:1. Select your contact name as in “Accessing contacts”.2. Press Details.3. Scroll to the number to set as the default and press Options.4. Scroll to Set as default and then press Select.A message confirms that the default number has been set.Setting the contacts viewYour Vertu phone can display your contacts in several different ways:Normal name list displays five contacts at a timeName and number displays one contact with the default numberName and image displays one contact with an associated image.To set the type of view:1. From the Home screen, press Menu » Contacts » Settings » Contacts view.2. Scroll to the required view and then press Select.A message confirms that the contacts view has been selected.Setting the name displayTo select whether the contact’s first or last name is displayed first:1. From the Home screen, press Menu » Contacts » Settings » Name display.2. Scroll to the required view and then press Select.A message confirms that the contacts view has been updated.Setting the font size for the list of contactsTo set the font size for your messages, contacts and web pages:1. From the Home screen, press Menu » Settings » Display » Font size.2. Scroll to Small font, Normal font or Large font and then press OK.A message confirms that the font size has been updated.A contact can have duplicate number and text types, for example two mobile numbers or two e-mail addresses.

CONTACTSEnglish28Contacts menuYou can use the options in the contacts menu to make a call, send a text message and send a business card to anyone whose contact information you have saved. Your phone automatically adds voice tags to your contacts, and you can also assign numbers to the speed dial list.Searching and callingTo search for an entry and call the default number:1. Select your contact name as in “Accessing contacts”. 2. Scroll to the required name and press the SEND key.To search for an entry and call a number other than the default number (using the phone memory only):1. Select your contact name as in “Accessing contacts” and press Details.2. Scroll to the required number.3. Press the SEND key or press Call to make the call.Text messagesWhen you have a contact open, you can send them a text message without returning to the main menu.Sending text messagesTo send a text message:1. Select your contact name as in “Accessing contacts” and press Details.2. Scroll to the required number and press Options.3. Scroll to Send message and then press Select.4. With Message highlighted, press Select.5. Key in the message and press Send. Business cardsThe business card function allows you to send and receive contact information, via text message, multimedia or Bluetooth. This function can be used with both the phone memory and the SIM card memory, although the SIM card memory only allows you to send the default number.Sending business cardsTo send a business card:1. Select your contact name as in “Accessing contacts” and press Details.2. Press Options » Send business card.3. Select the transmission method you want to use:To send by multimedia message: 1. Scroll to Via multimedia and then press Select. 2. Refer to “Writing and sending multimedia messages” on page 21 to complete and send your multimedia message.To send by text message:1. Scroll to Via text message and then press Select. 2. Refer to “Writing and sending text messages” on page 19 to complete and send your text message.To send by Bluetooth: 1. Scroll to Via Bluetooth and then press Select. 2. Scroll to the recipient’s device on the list and then press Select. A message confirms that the business card has been sent. Receiving business cardsWhen you receive a business card a message appears on the outer display. An audible alert sounds if your Vertu phone is set up for audible alerts.When you open the phone a message tells you there is a business card.To display a received business card:Press Show to display the business card.To save a business card to your directory:Press Save. A message confirms that you have saved the business card.To discard a business card without saving it:Press Exit then press Yes to confirm. A message confirms that you have discarded the business card.Speed diallingThe Contacts menu enables you to compile a speed dial list very quickly. You can have up to eight numbers saved in your speed dial list. To dial a number, simply press and hold one of the NUMBER keys.The phone memory can store additional contact information for example a person’s work and mobile phone numbers and an e-mail address.Speed dialling key number 1 is reserved for the voice mailbox.

CONTACTSEnglish29Adding numbers to the speed dial listTo add a number to the speed dial list from within a contact:1. Select your contact name as in “Accessing contacts” and press Details. 2. Scroll to the required number and press Options.3. Scroll to Speed dial and then press Select. 4. Scroll to an empty speed dial key, or one that you want to overwrite (see below).5. With the desired key highlighted, press Assign. A message confirms which speed dial number key has been assigned.To add a number to the speed dial list using the speed dial menu:1. From the Home screen, press Menu » Contacts » Speed dials.2. Scroll to the desired speed dial key and press Assign.3. Key in the Phone number: or press Search to select it from the Contacts list and then press OK.4. Enter the First name: if creating a new contact.5. Enter the Last name: of the contact.6. Scroll to Save and press Select.A message confirms which memory the contact has been saved to, followed by a message that confirms which speed dial number key has been assigned.Changing speed dial numbersTo change speed dial numbers from within a contact:1. Select your contact name as in “Accessing contacts” and press Details. 2. Scroll to the required number and press Options.3. Scroll to Speed dial and then press Select. 4. A message confirms that a speed dial already exists for the contact.5. Scroll to the desired speed dial key and press Assign.A message confirms which speed dial number key has been assigned.To change speed dial numbers using the speed dial menu: 1. From the Home screen, press Menu » Contacts » Speed dials.2. Scroll to the desired speed dial and press Options.3. Scroll to Change and then press Select.4. Enter the new Phone number: by keying it in or by pressing Search and then selecting an existing number.5. Enter the First name: if creating a new contact and then press Next.6. Enter the contact Last name: then press Next.7. Scroll to Save and press Select.A message confirms which memory the contact has been saved to, and which speed dial number key has been assigned.Deleting speed dial numbersTo delete speed dial numbers using the speed dial menu:1. From the Home screen, press Menu » Contacts » Speed dials.2. Scroll to the desired speed dial and press Options.3. Scroll to Delete and then press Select.4. Press Yes to confirm.A message confirms which speed dial number key has been deleted.Voice tagsYour Vertu phone can make a call to a contact using a voice tag. Voice tags are automatically added to all contacts.Your Vertu phone can store up to 2000 voice tags.Using voice tagsTo make a voice tag call:1. Press and hold the down the right SELECTION key.2. Speak the voice tag clearly into the microphone.3. A list of possible matches is displayed briefly giving you a chance to scroll to the correct one or Quit if it is not on the list.4. After about 2 seconds your phone will automatically dial the number.Playing voice tagsTo play a voice tag from within a contact:1. Select your contact name as in “Accessing contacts” and press Details. 2. Scroll to the contact name within the details and press Options.3. Scroll to Play voice tag and then press Select.The voice tag is played.GroupsUse groups to associate a contact name to a group. The group name appears on the display when a member of a group calls you. You can assign a different ringing tone to each group for easy recognition of incoming calls.Viewing groupsTo view groups:From the Home screen, press Menu » Contacts » Groups.The Groups are displayed.Creating a groupTo create a contact group:1. From the Home screen, press Menu » Contacts » Groups. 2. Press Add. If you have existing groups listed, press Options and then Add new group.3. Add a Group name.4. Add a Group image and tone (if required).5. Press Save.A message confirms that the group has been added.This method can add contact details and assign a speed dial number key at the same time. Very short names do not work well for voice tags. Use longer unique names, for example “Vertu Concierge Service.”

CONTACTSEnglish30Adding contacts to a groupTo open a group and link contacts to it:1. From the Home screen, press Menu » Contacts » Groups.2. Scroll to the desired group and press View.3. Press Add to display your contacts list.4. Scroll to the desired name and then press Select. Repeat for each contact to be added to the group.A message confirms that the contact has been added to the group.Editing group namesTo edit group names:1. From the Home screen, press Menu » Contacts » Groups.2. With the group name to be edited highlighted, press Options.3. With Group details highlighted, press Select.4. With Group name highlighted, press Select.5. Key in the new name for the group and then press OK.A message confirms that the group has been renamed.Deleting contacts from a groupTo delete contacts from a group:1. From the Home screen, press Menu » Contacts » Groups.2. Scroll to the desired group and press View.3. Scroll through the group members to the desired contact and press Options.4. With Remove member highlighted, press Select.5. Press Yes to confirm.A message confirms that the contact has been removed from the group.Adding group details to a contactTo open a contact and add group details:1. Select your contact name as in “Accessing contacts” and press Details. 2. Press Options.3. Scroll to Add to group and then press Select.4. Scroll to the desired group and then press Select.A message confirms that the contact has been added to the group.Deleting group details from a contactTo delete group details from a contact:1. Select your contact name as in “Accessing contacts” and press Details. 2. Scroll to the group name and press Options.3. Scroll to Remove from group and then press Select.4. Press Yes to confirm.A message confirms that the contact has been removed from the group.Setting group ringing tonesAll groups initially have a default ringing tone. To set a distinctive ringing tone for each group:1. From the Home screen, press Menu » Contacts » Groups.2. Scroll to the desired group and press Options » Group details.3. Scroll to Group tone:.4. Press Options » Change tone and select your ringing tone from Default / Open Gallery / Tone downloads.5. Press Save.A message confirms that the group ringing tone has been selected.Options on contact numbersAdd detailScroll to one of the following categories and press Select to add more details:>Number>Internet>Multimedia>Personal infoVoice callPress Select to call the contact.Send messageSelect a type of message and then press Select. See the chapter “MESSAGES” on page 16 for further instructions on sending messages.Add imagePress Select to open the Gallery and select an image. See “Adding contacts” on page 26.Edit1. Scroll to Edit and then press Select.2. Press Clear as many times as necessary to delete the number to the left of the cursor.3. Key in the new number.4. Press Save to save the new number.Delete1. Scroll to Delete and then press Select.2. Scroll to either Delete number to remove the number but retain the other contact details or Delete contact to remove all of the contact details and then press Select.3. Press Yes to confirm the deletion.Set as defaultHighlight a number in the list and press Set as default. A message confirms that number has been set as default.The default ringing tone for the caller groups is the ringing tone set up in the profiles menu.

CONTACTSEnglish31Change typeAllows you to redefine the number type as General, Mobile, Home, Office or Fax. Press Select and a message will be displayed to confirm the change.Copy number1. Select Keep original or Move original.2. Press Select. 3. A message confirms that the number has been copied.Send business cardSelect a transmission method and then press Select. See “Business cards” on page 28 for further instructions on sending business cards.Add to groupPress Select to add the contact to a group. “Adding contacts to a group” on page 30.Use numberThis makes a copy of the selected number allowing you to save it under a new contact record.Press Save and then use the NUMBER keys to enter a name for the new contact.Speed dialSelect a speed dial key and press Assign. A message confirms which speed dial key has been assigned.

CALL HISTORYEnglish325 CALL HISTORYThe Call history feature allows you to view information about calls that you have missed, received and made. You can also view information (volume of data / session duration) for packet data transfer and number of messages sent and received (both SMS and Multimedia).The call historyThe call history stores information about your most recent missed, received, and dialled calls. When the list is full, the most recent call replaces the oldest. To ensure that the call history is able to store your received and missed call information, your service provider must support caller ID, and it must be enabled. If the caller’s number is not available, for example if the caller withheld their number or the network did not transmit the number, No number appears in the calls list. The call history can only store information about calls that are actually received by your Vertu phone. If you do not have a signal or if your calls are blocked, any incoming calls will not be stored.Viewing the call historyTo view recent call information:1. From the Home screen, press Menu » Call history » All calls.2. The calls will be listed in chronological order.Viewing missed callsTo view details of calls that have been missed:From the Home screen, press Menu » Call history » Missed calls.Viewing received callsTo view details of calls that have been successfully received by your Vertu phone:From the Home screen, press Menu » Call history » Received calls.Viewing dialled numbersTo view details of numbers that have been dialled from your Vertu phone:From the Home screen, press Menu » Call history » Dialled numbers.Viewing message recipientsTo view details of contacts to whom messages have been sent:From the Home screen, press Menu » Call history » Msg. recipients.Clearing log listsTo clear information from your Vertu phone’s log1. From the Home screen, press Menu » Call history » Clear log lists.2. Scroll to one of the options and then press Select:All call lists removes all information from your Vertu phone logMissed calls removes details from the Missed calls logReceived calls removes details from the Received calls logDialled numbers removes details from the Dialled numbers logMessage recipients removes details from the Message recipients log.Viewing call durationTo view information about the duration of calls made and received by your Vertu phone:1. From the Home screen, press Menu » Call history » Call duration.2. The following information will be available for examination:Last call shows the length of the last call regardless of typeReceived calls shows the total combined duration of all received callsDialled calls shows the total combined duration of all dialled callsAll calls shows the total combined duration of all calls to and from your Vertu phone3. Clear timers it will be necessary to enter your security code to complete this operation. See “SECURITY” on page 13.Viewing the packet data counterTo view approximate information about the volume of data sent and received:1. From the Home screen, press Menu » Call history » Data counter.2. The following information will be available for examination:Sent in last session is the amount of data in bytes, sent in the last transmissionReceived in last sess. is the amount of data in bytes, received in the last transmissionAll sent data is the total amount of data in bytes, sent in all transmissionsAll received data is the total amount of data in bytes, received in all transmissionsThis operation will take immediate effect without requiring confirmation. Once log lists have been cleared the information cannot be recovered.

CALL HISTORYEnglish333. Clear counters resets all of the counters. It will be necessary to enter your security code to complete this operation. See “SECURITY” on page 13.Viewing the data timerTo view approximate information about the duration of sessions over GPRS:1. From the Home screen, press Menu » Call history » Data timer.2. The following information will be available:Duration of last sess. shows the length of time spent on the last sessionDuration of all sess. shows the combined length of time spent on all sessions3. Clear timers resets all of the timers. It will be necessary to enter your security code to complete this operation. See “SECURITY” on page 13.Viewing the message logTo view details of messages that have been sent and received by your Vertu phone:1. From the Home screen, press Menu » Call history » Message log.2. The following information will be available:Sent text messages shows number of text messages and parts sentSent MMS msgs. shows number of multimedia messages sentSent e-mails shows number of email messages sentReceived text msgs. shows number of text messages and parts receivedReceived MMS msgs. shows number of multimedia messages receivedDownloaded e-mails shows number of downloaded messages to My mailbox.3. Clear all counters it will be necessary to enter your security code to complete this operation. See “SECURITY” on page 13.Viewing the positioning logThis displays a list of the GPS fixes you have made.From the Home screen, press Menu » Call history » Positioning.Viewing the sync logSync log shows statistics on data you have transferred while synchronising your Vertu phone.To view the sync log, from the Home screen, press Menu » Call history » Sync log.

SETTINGSEnglish36My shortcutsWith personal shortcuts you get quick access from the Home screen to frequently used functions of your Vertu phone.If the left SELECTION key is Go to, select Go to » Options and select from the following options to personalise your Go to menu:Select options - to add or to remove a functionOrganise - to rearrange the functions on your personal shortcut list.Auto sorting on - dynamically displays the menu options you use most often at the top of the listThe auto sorting feature must be disabled for you to use the Select options and Organise functions.Left selection keyTo select a function for the left SELECTION key:1. From the Home screen, press Menu » Settings » My shortcuts » Left selection key.2. Scroll to the desired function and then press Select.Right selection keyTo select a function for the right SELECTION key:1. From the Home screen, press Menu » Settings » My shortcuts » Right selection key.2. Scroll to the desired function and then press Select.4-way scroll keyTo select functions for the 4-way scroll key:1. From the Home screen, press Menu » Settings » My shortcuts » Navigation key.2. Select the key to be changed. Please note that the UP key is reserved for Vertu feeds but can be changed.3. Press Change.4. Scroll to the required shortcut from the list and press Select.ConnectivityYou can connect your Vertu phone to a compatible device using Bluetooth wireless technology or a USB data cable (CA-101V) connection. You can also define the settings for internet dial-up connections.Bluetooth wireless technologyYour Vertu phone is compliant with Bluetooth Specification 2.0. You can use Bluetooth car kits, perform data transfer and use your Vertu phone as a modem.To ensure interoperability between other devices supporting Bluetooth technology, use Vertu approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life. Bluetooth technology allows you to connect the phone to a compatible Bluetooth device within 10 meters (32 feet). Since devices using Bluetooth technology communicate using radio waves, your Vertu phone and the other devices do not need to be in direct line-of-sight, although the connection can be subject to interference from obstructions for example walls or from other electronic devices.Bluetooth settingsTo define how your Vertu phone is recognised by other Bluetooth devices:1. From the Home screen, press Menu » Settings » Connectivity » Bluetooth.2. Scroll to one of the options and then press Select:Bluetooth enables you to switch your bluetooth connection on and offConn. to audio access. enables you to connect your phone with an audio accessory and the device that you want to connectPaired devices enables you to add a new Bluetooth device and view existing devices already paired with your phoneActive devices checks which Bluetooth connection is currently active My phone’s visibility enables you to operate the phone in hidden mode to avoid malicious softwareMy phone’s name enables you to define the name that you want your Vertu phone to be recognised by on the network. Bluetooth wireless connectionTo make a Bluetooth wireless connection:1. From the Home screen, press Menu » Settings » Connectivity » Bluetooth.2. Scroll to Paired devices and press Select.3. Select a device from the list of available devices or scroll to Add new device and press Select.Your Vertu phone will automatically turn Bluetooth on if necessary and search for available devices.4. Scroll to the device to connect to and press Add.5. Enter a passcode if necessary and press OK.A message is displayed when the device is connected successfully and the paired device is added to the Paired devices list.To check which Bluetooth connection is currently active, scroll to Active devices and then press Select.Select Options to access available options depending on the status of the device and the Bluetooth connection.GPSThis is where you can set up a connection to another GPS device that you want to use, and set preferences for Internet Assisted GPS.Bluetooth driver compatibility information is available in the Vertu PC Suite help. Do not accept Bluetooth connectivity from sources you do not trust. Alternatively, switch off the Bluetooth function. This will not affect other functions of your Vertu phone.

SETTINGSEnglish37USB data cableYou can use the micro-USB data cable to transfer data between the phone and a compatible computer or a printer supporting PictBridge. You can also use the micro-USB data cable with Vertu PC suite. To change the USB mode, select Menu » Settings » Connectivity » USB data cable.To connect your phone using the micro-USB data cable:1. Connect the data cable. A message appears on the display Select USB mode:2. Select from the following options:PC Suite - to use the phone to interact with applications on a computer that has Vertu PC suite installed.Printing & media - to use the phone with a PictBridge compatible printer, or to connect the phone to a PC to synchronise it with Windows Media Player.Data storage - to connect to a computer that does not have Vertu software and use the phone as data storage.Ask on conn.. - to reconfirm every time you connect a USB cable.Internet connectivityWith your Vertu phone you can take advantage of HSPA (3.5G) and WCDMA (3G) packet data services to surf the internet and download and upload files. You will also find that MMS messaging, e-mail and computer dial-up are faster using these services. For availability and subscription to data services contact your service provider or network operator. Using your Vertu phone as a modem, you can connect your PC to the internet even if you cannot connect using your regular ethernet connection.1. Install Vertu PC Suite (supplied on the CD-ROM) on your computer.2. Connect your Vertu phone to your computer using Bluetooth or a micro-USB cable.3. Open Vertu PC Suite and click on Connect to the Internet. The One Touch Access application will get you connected to the Internet.Call settingsYou can personalise the way your Vertu phone behaves during a call by using the call settings.Call divertThe call divert feature redirects your incoming voice and video calls to another number, for example your voice mailbox number.When a call is diverted your Vertu phone does not give any indication of an incoming call. The call divert feature is managed by your service operator and is not phone specific. The call divert feature may remain active even if your SIM card is not currently in a phone.To manage your call divert settings:1. From the Home screen, press Menu » Settings » Call » Call divert.2. Scroll to one of the divert options:All voice calls forwards all calls to the number you specifyIf busy forwards all calls when you are in a callIf not answered forwards all calls to another number when you do not answer. You can also set a delay before forwarding takes placeIf out of reach forwards all calls when your Vertu phone is turned off or out of the coverage areaIf not available forwards all calls when you do not answer, your Vertu phone is busy or turned off, or out of the coverage area. You can also set a delay before forwarding takes placeNo call diverts cancels all call diversions.3. Press Select:Activate sets up the divert. Use the NUMBER keys to enter the divert number or select a contact and then press OKCancel cancels the divertCheck status displays the current status of the divert. A progress indicator appears, followed by an information note indicating whether the divert is active and to which number.Open fold to answerThis function enables you to answer an incoming call by opening the fold.To change the fold open to answer setting:1. From the Home screen, press Menu » Settings » Call » Answ. if fold opened.2. Select On or Off and then press OK.Anykey answerAnykey answer allows you to answer an incoming call by briefly pressing any key except the POWER key, SELECTION and END keys.To change the anykey answer setting:1. From the Home screen, press Menu » Settings » Call » Anykey answer.2. Select On to enable Anykey answer, or Off to disable it and then press OK.Automatic redialOccasionally, your network may experience heavy traffic, or the called party is busy and you might not be able to make a call. With automatic redial activated, your Vertu phone redials the number up to 10 times, and notifies you once the network is available.To change the automatic redial setting:1. From the Home screen, press Menu » Settings » Call » Automatic redial.2. Select On to enable automatic redial, or Off to disable it and then press OK.Voice clarityThis feature enhances speech intelligibility especially in noisy environments.To change the voice clarity setting:1. From the Home screen, press Menu » Settings » Call » Voice clarity.Cancelling all call diversions may affect your ability to receive voice mail messages. Some service providers may not allow cancelling of all diversions. Contact your service provider for specific details.

SETTINGSEnglish382. Select Active to enable voice clarity, or Inactive to disable it and then press OK.Speed diallingSingle key speed dialling enables you to quickly dial a number by pressing and holding a single key.To activate the speed dialling feature:1. From the Home screen, press Menu » Settings » Call » Speed dialling.2. Select On to enable speed dialling, or Off to disable it and then press OK.To change the speed dial settings for your contacts, see “Speed dialling” on page 28.Call waitingCall waiting notifies you of an incoming call while you are in another call. You can accept, reject, or ignore the incoming call. Contact your service provider for more details.To change the call waiting setting:1. From the Home screen, press Menu » Settings » Call » Call waiting.2. Scroll to one of the options and then press Select:Activate enables call waitingCancel cancels call waitingCheck status displays whether the option is active and for which type of call. To use the call waiting feature:1. When you have a call in progress and you receive an incoming call, you will hear an audible alert and the display indicates that another call is waiting. Press the SEND key to answer the call. The person you were speaking to is put on hold. Call waiting may not work correctly if If busy is set.2. Press the SEND key to swap between the calls. A confirmation message is displayed. The person on hold becomes the active call, and the other person is put on hold.3. Press the END key to end the active call. A confirmation message is displayed and the other call becomes active. 4. Press Options then scroll to End all calls and then press Select to end all calls. Call duration displayThis displays the call duration during each call.To change the display setting:From the Home screen, press Menu » Settings » Call » Call duration display.Select On or Off and then press OK.Summary after callYour Vertu phone can display the time spent on a call. To change the call summary setting:1. From the Home screen, press Menu » Settings » Call » Summary after call.2. Select On to enable summary after call, or Off to disable it and then press OK.Send my caller IDShows your phone number to the person you are calling. To change the caller ID setting:1. From the Home screen, press Menu » Settings » Call » Send my caller ID.2. Select Yes to enable caller ID, No to disable it, or Set by networkto use the setting agreed with your service provider and then press OK. Phone settingsYou can personalise the following options on your Vertu phone using this menu.Language settings1. From the Home screen, press Menu » Settings » Phone » Language settings.2. Scroll to one of the options and then press Select.Phone language enables you to set the display language of your Vertu phone. If you select Automatic, the phone selects the language according to the information on the SIM cardSIM language enables you to select the USIM card languageMemory status 1. From the Home screen, press Menu » Settings » Phone » Memory status.2. Scroll through the options to see how much of your Vertu phone’s memory is being used to store media, messages and applications and how much free space is available.Automatic keyguardTo set the keys of your Vertu phone to lock automatically after a preset time delay when the phone is in the stand-by mode and no function of the phone has been used:1. From the Home screen, press Menu » Settings » Phone » Automatic keyguard. 2. Select On, and use the NUMBER keys to enter the time delay.Security keyguardTo set your Vertu phone to ask for the security code when you unlock the keyguard:1. From the Home screen, press Menu » Settings » Phone » Security keyguard.2. Enter your Security code (see “Security code” on page 13) and select On.Voice recognitionYou can call contacts and carry out phone functions by speaking a voice command.Voice commands are language-dependent. Select Menu » Settings » Phone » Voice recognition » Recognition lang. and your language before using voice commands.From the Home screen, press Menu » Settings » Phone » Voice recognition » Voice recog. training to train the voice recognition of your phone to your voice.When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.

SETTINGSEnglish41Data transferSynchronise your calendar, contacts data, and notes with another compatible device, for example a compatible PC, or a remote Internet server (network service).Your Vertu phone allows data transfer with a compatible PC or another compatible device when using the phone without a SIM card. Note that when you use the phone without a SIM card, some functions appear dimmed in the menus and cannot be used. Synchronising with a remote Internet server is not possible without a SIM card.Data transfer with a compatible deviceBluetooth wireless technology can be used for synchronisation. The other device should be in the stand-by mode.To start data transfer:1. From the Home screen, press Menu » Settings » Sync and backup » Data transfer.2. Scroll to the required entry in the Partner list (other than Server sync or PC synchronisation) and then press Select.According to the settings, the selected data is copied or synchronised. The other device also must be activated for receiving data.Synchronise from a compatible PCBefore you synchronise data from calendar, notes, and contacts with a PC, you must install the Vertu PC Suite software on a compatible PC. Use Bluetooth wireless technology, or a USB data cable for the synchronisation, and start the synchronisation from the PC.Synchronise from a serverTo use a remote Internet server, you must subscribe to a synchronisation service, e.g. Vertu Fortress (see “Vertu Fortress” on page 51). For more information and the settings required for this service, contact your service provider. You may receive the settings as a configuration message. If you have saved data on the remote Internet server, to synchronise your Vertu phone, start the synchronisation from your phone:1. From the Home screen, press Menu » Settings » Sync and backup » Data transfer » Server sync.2. Depending on the settings, select Initialising synchronisation or Initialising copy.Synchronising for the first time or after an interrupted synchronisation may take up to 30 minutes to complete, if the contacts or calendar are full.

ADDITIONSEnglish427 ADDITIONSYour Vertu phone has a multimedia player with which you can view, play, and download files, such as images, audio, video, and animated images. You can also view compatible streaming videos from a network server (network service).GamesYour Vertu phone contains games and applications. To launch a game:1. From the Home screen, press Menu » Additions » Games. 2. Scroll to the desired game, and press Open.To download an application:Your phone supports J2ME Java applications. Make sure that the application is compatible with your phone before downloading it.You can download new Java applications and games using the Vertu Application Installer from Vertu PC Suite. You can also download and install applications over-the-air. CalculatorThe calculator in your Vertu phone adds, subtracts, multiplies, divides, calculates the square and the square root.To perform a calculation:1. From the Home screen, press Menu » Additions » Calculator.2. When 0 is displayed, enter the first number in the calculation.3. Use the 4-way scrollkey to select the function you want to perform.4. Enter the second number.5. Press the = sign to display the result.To start a new calculation select Clear.Media playerYour Vertu phone includes a media player for listening to music tracks, recordings or other MP3, MP4, AAC, eAAC+ or Windows Media.With the media player you can download, view, and play compatible audio and video files in a variety of formats.Your Vertu phone can play music tracks, recordings or other MP3 or AAC sound files that you have transferred to the phone with the Audio Manager application (part of Vertu PC Suite), BT or USB cable or web.Music files stored in a folder in the phone memory or on the memory card, will automatically be detected and added to the default track list. Playing the music tracksTo play the music tracks:1. From the Home screen, press Menu » Additions » Media player.2. Scroll to one of the following options to find the track you want to listen to:All songs lists all songs stored on your phonePlaylists shows all playlists you have created and stored on your phoneArtists lists the songs by artist nameAlbums lists the songs by album titleGenres lists the songs by genre typeVideos lists all video files stored on your phone.3. Press Open to open the file. Press Play to start the track.4. Use the following commands to control the media player:Press the centre select key to play or pauseMove the 4-way scroll key up to open the media player menu and scroll upMove the 4-way scroll key down to open the media player menu and scroll downMove the 4-way scroll key left to go to previous trackMove the 4-way scroll key right to go to next track5. Press Options to access the media player options (see “Media player settings,” below).6. Press the END key to close the media player.To stop the media player, press the STOP key.If music is still playing after you exit the media player, you can stop the media player by pressing and holding the END key.When you open the media player menu, the details of the first track on the default track list are shown.Only install and use applications and other software from sources that offer adequate security and protection against harmful software.For the availability of different services, pricing, and tariffs, contact your service provider.Your device may have some bookmarks loaded for sites not affiliated with Vertu. Vertu does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.Press # to enter a decimal point.Press * to display more functions.Warning! Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing.

ADDITIONSEnglish43Media player settingsTo change the media player settings:1. From the Home screen, press Menu » Additions » Media player.2. Press Options from the media player menu and scroll to one of the following:Downloads to access tracks from the following options:Bookmarks to open the web bookmarksGo to addressto enter the address of a mobile Internet service and then press OKStreaming settings to set the connection settings for the media service. Contact your service provider for information about connection settings. You may receive the streaming settings as a connection settings message from the Vertu web site for your service provider.Update library to update your music library with your latest downloadsMusic libr. details to view data on the number of songs stored on your phone, memory used and last updated date.3. Press Options while a track is playing and select one of the following:Go to Media menu to return to the main media player menuNow playing to show details of the current trackSettings to access the following features:Equaliser to select from Normal, Pop, Jazz, Classical or Set %N and Set %N for your own custom settings while the track is playingShuffle to play a random choice of your stored tracksRepeat to repeat a trackDownloads to access tracks via the webMute audio to mute the current trackWeb page to access a Web page associated with the currently played track. Dimmed if no Web page is availablePlay via Bluetooth connects to a Bluetooth audio accessoryEqualiserYou can control the sound quality when using the music player by amplifying or diminishing frequency bands.Change equaliser settingsTo change the equaliser settings:1. From the Home screen, press Menu » Additions » Equaliser.2. Scroll to an equaliser set and press Activate. Choose from Normal, Pop, Jazz, Classical or Set %N and Set %N for your own custom settings.A message confirms your equaliser setting.View equaliser settingsTo view equaliser settings:1. From the Home screen, press Menu » Additions » Equaliser.2. Scroll to an equaliser set and press Options. 3. Scroll to View and press Select.Edit equaliser settingsTo edit equaliser settings:1. From the Home screen, press Menu » Additions » Equaliser.2. Scroll to an equaliser set and press Options.3. Scroll to Edit and press Select.4. Scroll up or down to adjust each equaliser channel.5. Scroll left or right to change channels.6. Press Save to save your changes. A message appears to confirm your new settings.Press Activate to select your new equaliser set. A message confirms your equaliser setting.Rename equaliser settingsTo rename equaliser settings:1. From the Home screen, press Menu » Additions » Equaliser.2. Scroll to an equaliser set and press Options.3. Scroll to Rename and press Select.4. Use the NUMBER keys to enter a new name.Press OK to confirm your changes. A message confirms your new equaliser set name.Video recorderSee “Video recorder” on page 56.Voice recorderYou can record speech or an active call, and save the recordings in the gallery. This is useful, for example, when recording a name and phone number to write down later.Record soundTo make a voice recording:1. From the Home screen, press Menu » Additions » Voice recorder.2. To start the recording, with the RECORD button highlighted, press Select and then record your message.3. To stop the recording, with the STOP button highlighted, press Select. The recording is saved in the Recordings folder of the Media memory by default.Record a phone callTo record a phone call:1. During a call, press Options. 2. Scroll to Record and then press Select. While the call is being recorded, all parties to the call can hear a beeping sound every five seconds.3. To stop recording, with the STOP button highlighted, press Select. The recording is saved in the Recordings folder of the gallery.When recording a call, hold the phone in the normal position near to your ear. Not all settings can be edited.Not all settings can be edited.

ADDITIONSEnglish44Voice recorder optionsImmediately before or after a recording, press Options to view the following:Play last recorded to listen to the latest recordingSend last recorded to attach the recording to a Multimedia or Audio message or to send via BluetoothRecordings list to see the list of recordings in GallerySelect memory to choose recording file destination. Choose from Media memory or Other folder.NotesYou can write yourself notes as reminders, but these are not associated with the calendar and do not alert you with an alarm.Creating notesTo create a note:1. From the Home screen, press Menu » Additions » Notes.2. Press Add.3. Use the NUMBER keys to write the note and press Save.A message confirms that the note is saved.Viewing notesTo view a note:1. From the Home screen, press Menu » Additions » Notes.2. Scroll to the note you want to view and press View.Editing notesTo edit a note:1. From the Home screen, press Menu » Additions » Notes.2. Scroll to the note you want to edit and press View » Edit.3. Use the NUMBER keys to make the required changes to the note and press Save.Sending notesYou can send a note to another phone using Bluetooth or the messaging service or convert it to a message.To send a note as a text message:1. From the Home screen, press Menu » Additions » Notes.2. Scroll to the required note and press Options.3. Press Send note » Send as message.4. Press OK to send the note.A message confirms that the note is being sent.To send a note using Bluetooth:1. From the Home screen, press Menu » Additions » Notes.2. Scroll to the required note and press Options.3. Press Send note » Via Bluetooth.4. Highlight the device you want to send the note to, and then press Select.A message confirms that the note is being sent.Deleting notesYou can delete notes one at a time or all at once.To delete one note:1. From the Home screen, press Menu » Additions » Notes.2. Scroll to the required note and press Options » Delete.3. Press Yes to confirm deletion. 4. A message confirms that the note has been deleted.To delete all notes:1. From the Home screen, press Menu » Additions » Notes » Options » Delete all notes.2. Press Yes to confirm deletion. A message confirms that all of the notes have been deleted.CollectionPreloaded Java applications are available here. Applications downloaded from third-party sites are also stored here.StopwatchYou can measure time, take intermediate times, or take lap times using the Stopwatch. To open the stopwatch:From the Home screen, press Menu » Additions » StopwatchSelect from the following options:Split timing - to take intermediate times. Use the Options key to save, view and delete split times. Lap timing - to take lap times. Use the Options key to save, view and delete lap times.

CALENDAREnglish458 CALENDARCalendarYour Vertu phone has a calendar where you can add notes about meetings, calls, birthdays, memos and reminders. You can also create a To-do list and check your memory status from the Options menu.Opening the calendarTo open the calendar:1. From the Home screen, press Menu » Calendar.2. The current month is displayed, with today highlighted. Press the 4-WAY SCROLL key to move to different dates.When there is a note associated with a date, the date will be highlighted.Calendar settingsOn the Settings menu you can change the following characteristics of the calendar:>Date & time settings>Select the Default view>Select the day that Week starts on>Select a Calendar tone>Select how often to Auto-delete notesDate and time settingsTo adjust the date and time settings if you are not using the Accurate time settings:1. From the Home screen, press Menu » Calendar2. Press Options and scroll down to Settings.3. Press Select and Date & time settings.4. Scroll to one of the following options and then press Select to customise the time settings:Date: enables you to use the NUMBER keys to set the date on the phoneTime: enables you to use the NUMBER keys to set the time on the clockTime zone: enables you to set the valid offset from GMTDaylight saving: enables you to select between Wintertime or Summertime (+1 or +2 hours) daylight saving periods.5. Scroll down and select Save to confirm your settings.Selecting the default viewYou can configure the calendar on your Vertu phone to default to month view or week view.To set the default view:1. From the Home screen, press Menu » Calendar » Options » Settings » Default view.2. Highlight the required view and then press Select.A message confirms which default view has been selected.Selecting when the week startsThe calendar can display the week starting on Saturday, Sunday or Monday.To select a day that the week starts on:1. From the Home screen, press Menu » Calendar » Options » Settings » Week starts on.2. Highlight the required day and then press Select.A message confirms which day the week starts on.Selecting a calendar toneTo select a tone for the calendar:1. From the Home screen, press Menu » Calendar » Options » Settings » Calendar tone.2. Select Standard for standard tone or Open Gallery to choose from a tone stored in the Gallery folders.3. Press Select to confirm the new settings.Calendar NotesNotes enables you to make a note associated to a date and time.To make a note:1. From the Home screen, press Menu » Calendar.2. Scroll to the date you want to make a note for.3. Press Options » Make a note.4. Select from the following options:Reminder - enables you to use the NUMBER keys to enter a title for the reminder and set an alarm.Meeting - enables you to use the NUMBER keys to enter details about a meeting: subject, location, start and finish date and times and set an alarmCall - enables you to use the NUMBER keys to enter details about a phone call: phone number, name and time details and set an alarmBirthday - enables you to use the NUMBER keys to enter details about a birthday: name, year of birth, and set an alarmAnniversary - enables you to use the NUMBER keys to enter details about an anniversary: name, occasion, date, year and set an alarmMemo - enables you to use the NUMBER keys to enter details about a memo: subject, start date, end date and set an alarm

CALENDAREnglish46Viewing notesIf there are notes for a day, the date will be highlighted. You can view notes for a particular day or for the whole week.To view the notes for a day:1. From the Home screen, press Menu » Calendar.2. With the required day highlighted, press View.3. The notes for that day will be displayed. Viewing notes for a weekTo view notes for a week:1. From the Home screen, press Menu » Calendar.2. Scroll to a day in the week of interest.3. Press Options » Week view. 4. The week is displayed showing any notes.Editing notesTo edit a note:1. From the Home screen, press Menu » Calendar.2. With the required day highlighted, press View. The notes for that day will be displayed. 3. Press Options » Edit to open the note for editing. 4. Edit the details as required and press Save.Moving notesYou can move a note to a different date and time.To move a note:1. From the Home screen, press Menu » Calendar.2. With the required day highlighted, press View. 3. Press Options » Move.4. Enter a new date and time and then press OK.5. Set an alarm if required and then press OK.A message confirms that the note has been moved.Sending a noteTo send a note using the calendar:1. From the Home screen, press Menu » Calendar.2. With the required day highlighted, press View.3. Press Options » Send note » Via calendar.4. Key in the phone number or press Search to use the Contacts list.5. Press OK to send the note.Copying notesYou can copy a note to another date and time.To copy a note:1. From the Home screen, press Menu » Calendar.2. With the required day highlighted, press View. 3. Press Options » Copy.4. Key in the new date and then press OK.5. Key in the new time and then press OK.A message confirms that the note has been copied.Auto-deleting notesYour Vertu phone can delete notes automatically. Notes can be deleted after one day, one week or one month.To auto-delete notes:1. From the Home screen, press Menu » Calendar » Options » Settings » Auto-delete notes.2. Highlight the required frequency, or Never and then press Select.A message confirms whether auto-delete is activated or not.To-do listThe To-do list enables you to create notes for tasks you have to do.You can send a to-do note to another phone as a text message, or as a multimedia message or by Bluetooth. You can also save a to-do note to the calendar.Opening the to-do listTo open the to-do list:From the Home screen, press Menu » Calendar » Options » Go to to-do list.Any to-do notes will be displayed.Creating a to-do listTo create a to-do list:1. From the Home screen, press Menu » Calendar » Options » Go to to-do list.2. Press Add.3. Use the NUMBER keys to enter Subject: details.4. Select High, Medium or Low priority using the left and right 4-WAY SCROLL keys. The priority determines where the to-do note will be displayed in your list of to-do notes. High priority notes are displayed at the top of the list, whilst low priority notes are displayed at the bottom of the list.5. Use the NUMBER keys to enter the due date and time and set an alarm if required.6. Then select Save.A message confirms that the To-do note is saved.To change the priority, view the to-do note and select the deadline option. You can also mark notes as done, edit and delete them. Deleting a to-do listTo delete a to-do list1. From the Home screen, press Menu » Calendar » Options » Go to to-do list.2. Scroll to the desired to-do note and press Options.3. Scroll to Delete or Delete all notes and then press Select.4. Press Yes to confirm.A message confirms the deletion.If you mark your to-do notes as completed when you have finished your tasks, you can select Delete done notes to delete all the completed to-do notes at once.

ALARM CLOCKEnglish479 ALARM CLOCKYour Vertu phone contains a simple to use alarm clock.If you are using the accurate time clock feature, when you are travelling the phone automatically adjusts to the local time and any preset alarms sound at the usual time wherever you are. You do not need to reset your alarm clock at your destination.The alarm will sound even if your Vertu phone is switched off. Setting the alarmTo set the alarm:1. From the Home screen, press Menu » Alarm clock.2. Use the NUMBER keys to enter the time you want the alarm to sound.3. Press Options and use the 4-way scroll key to set the alarm details.Alarm use the 4-way scroll key to toggle the alarm on and off.Alarm time: displays the time the alarm is set for and can only be changed as aboveRepeat: use the 4-way scroll key to toggle the repeat feature on and off. Setting the repeat feature to On means that the alarm will sound every day at the specified timeRepeat days: press Options and Change to select the days on which you want the alarm to repeat. This option is only available if Repeat: is switched OnAlarm tone: use the 4-way scroll key to select an alarm toneStandard is the default alarm toneOpen Gallery enables you to select a tone from the gallery files on your Vertu phoneTone downloads enables you to select and download a tone from the websiteSnooze time-out: use the NUMBER keys to enter the snooze time-out in minutes4. Select Save when complete.A message confirms that the alarm is on, and a red marker is visible on the clock at the alarm time. Cancelling the alarmTo cancel the alarm:1. From the Home screen, press Menu » Alarm clock » Tu rn alarm off.A message confirms that the alarm has been turned off..Turning off the alarmTo turn off a ringing alarm:1. When the alarm sounds press the stop icon on the outer display. 2. If your Vertu phone is switched off when the alarm sounds, a message asks if you want to switch the phone on. Press Yes to switch the phone on or press No to leave the phone switched off.Activating the snooze functionTo activate the snooze function:1. When the alarm sounds turn the phone over onto its front. If the phone is already on its front, rotate it through 360 degrees.2. The alarm will sound again after the Snooze time-out duration defined when setting the alarm.3. If you leave the alarm ringing, it will ring for approximately one minute and then go into snooze mode.Do not press Yes when wireless phone use is prohibited or when it may cause interference or danger.

WEBEnglish4810 WEBYou can access various Web services on your Vertu phone.Check the availability of these services, pricing, tariffs, and instructions with your service provider. Automatically setting up Web browsingDepending on which service provider you use, your Vertu phone might already have Web settings installed so you might be able to browse the Web straight away. If you cannot connect to the Web, please contact Vertu Concierge or visit www.vertu.com on your computer and download your settings.Check the availability of these services, pricing, tariffs, and instructions with your service provider. Manually setting up Web browsingFirst, ensure that the correct configuration settings of the service that you want to use are activated.To select the settings for connecting to the service: 1. From the Home screen, press Menu » Web » Web settings » Configuration sett.Only the configurations that support the browsing service are shown. Select a service provider or Default for browsing. 2. Scroll to Account and highlight a browsing service account contained in the active configuration settings and then press Select.Vertu MobileVertu Mobile is Vertu’s presence on the Mobile Internet, tailored for handsets and carefully designed for being accessed on the go. To open Vertu mobile:From the Home screen, press Menu » Web » Vertu Mobile.The following options are available:>Discover contains the latest Vertu news>Where to buy enables you to find an authorised Vertu retailer wherever you are in the world>About Vertu contains information about Vertu>Recommend us enables you to enter a friends mobile phone number and they will receive a text message providing a link to Vertu Mobile.Go to addressTo enter a web page address:1. From the Home screen, press Menu » Web » Go to address. 2. Use the NUMBER keys to enter the service URL.Browse pagesWhile you are browsing the Internet, the function of the phone keys may vary. Follow the text labels on the phone display and see below for more information. is shown on the top left of the display during browsing. If you are on a 3G network you can call and browse at the same time. However on other networks if you receive a call or a text message while browsing, indicates that the Internet connection is suspended while you receive the call or text message. When the call or text message ends, your Vertu phone reconnects the browsing session.Browse with phone keysTo browse through the page, scroll in any direction.To select a highlighted item, press the CALL key, or press Select.To enter letters and numbers, press the NUMBER keys. To enter special characters, press *.Options while browsingPress Options to open a new list of options for browsing:Press Home to return to your start pagePress Bookmarks to access the list of bookmarksPress Go to address to enter a specific web page addressPress Add bookmark to save the page as a bookmarkPress Navigation to view browsing history, downloads or to reload the current pagePress This page to show the list of options for the active pagePress Too ls to show a list of other optionsPress Settings to view or change browsing settings. See “Settings” on page 48.Press Quit to disconnect from a service.The service provider may also offer other options.Receive a bookmarkWhen you have received an address that is sent as a bookmark, the message 1 bookmark received is displayed. The received bookmark is saved automatically to Received files. To view it, press Show and select Bookmarks.SettingsAppearance settings1. From the Home screen, press Menu » Web » Web settings.2. Scroll to Display and then press Select. 3. Scroll to one of the following options and then press Select:Important: Use only services that you trust and that offer adequate security and protection against harmful software.Important: Use only services that you trust and that offer adequate security and protection against harmful software.

WEBEnglish49Press Show images and No to hide pictures on the page. This can speed up the browsing of pages that contain a lot of picturesPress Show page title and No to hide the page title on the page. This saves screen space.Minimap zooms out while you are scrolling to enable you to navigate the web more easily. If you select Off, while scrolling the pages are displayed in full size view.Press WML text wrapping and On to set the text to continue on the next line on the display. If you select Off, the text is abbreviatedScroll to General and press Select.4. Backstep. opens hist. enables you to open the visual history when you go back a page.Press Auto-fill and Enable to enable your Vertu phone to complete fields for youPress Unicode (UTF-8) addr. and On to set the phone to send a URL as a UTF-8 encoding. You may need this setting when you access a Web page created in foreign languagePress Content encoding to select the encoding for the browser page content Press JavaScript and Enable to enable the Java scripts.Setting the font size for web pagesTo set the font size for your messages, contacts and web pages:1. From the Home screen, press Menu » Settings » Display » Font size.2. Scroll to Small font, Normal font or Large font and then press OK.A message confirms that the font size has been updated.Security settingsCookiesCookies are parcels of information used by Web servers to differentiate a user and their preferences when navigating a website or services such as online shopping. Cookies are saved in the cache memory of your Vertu phone. Cookies are saved until you clear the cache memory. To allow or prevent the phone from receiving cookies, while browsing:1. From the Home screen, press Menu » Web » Web settings » Security » Cookies. 2. Select Allow or Reject.Unsecure contentTo set an alert when a secure page contains an unsecure item. 1. From the Home screen, press Menu » Web » Web settings » Security » Alert for unsec. mode.2. Press Yes to set the phone to alert when a secure page contains an unsecure item. These alerts do not guarantee a secure connection.Scripts over secure connectionYou can select whether to allow the running of scripts from a secure page. The phone supports WML scripts.From the Home screen, press Menu » Web » Web settings » Security » WMLscript » Allow or Reject.Downloading sett. enables you to allow or disallow software and configuration updates in the home network.Configuration sett. only the configurations that support the browsing service are shown. Select a service provider or default for browsing.Clear the cacheA cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed is stored in the cache.To empty the cache: From the Home screen, press Menu » Web » Clear the cache.Browser securitySecurity features may be required for some services, for example online banking or shopping. For such connections you need security certificates and possibly a security module, which may be available on your SIM card. For more information, contact your service provider.Security moduleThe security module improves security services for applications requiring a browser connection, and allows you to use a digital signature. The security module may contain certificates as well as private and public keys. The certificates are saved in the security module by the service provider.To view or change the security module settings:From the Home screen, press Menu » Settings » Security » Security module settings.CertificatesThe existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.There are two kinds of certificates: >server certificates>user certificates.You may receive these certificates from your service provider. User certificates may also be saved in the security module by the service provider.Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security.