VeryKool USA M950 HSPA USB Modem User Manual m950 UserManual

Download:
Mirror Download [FCC.gov]
Document ID	1279816
Application ID	v37jm/kN1XJCJuUn/t0YAA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.33kB (229118 bits)
Date Submitted	2010-05-12 00:00:00
Date Available	2010-05-12 00:00:00
Creation Date	2010-05-03 09:05:32
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2010-05-03 09:16:15
Document Title	Microsoft Word - m950 UserManual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	hp

3.5G Connect
m950
User Manual
Index
Introduction m950 .........................................................2
Internet Service..............................................................7
SMS Service....................................................................9
Contacts .......................................................................14
Voice Call......................................................................18
Settings ........................................................................20
FAQs.............................................................................27
INTRODUCTION M950
1.
To launch the Network Connect, double‐click the
shortcut icon on the desktop. It should be noted that:
¾
If the PIN code enabled, enter the correct one, then
click OK. The (U)SIM will be locked after three retries of
incorrect PIN code inputting;
¾
Enter the correct PUK to retrieve the default PIN code.
After ten retries of incorrect PUK code inputting, please
contact with your service provider;
¾
With the wrong PIN and PUK, all the network services
are unavailable.
2.
Main interface introduction
: Connect /disconnect to the internet
: Access to the SMS service interface
: Access to the Phonebook interface
：Access to Voice call interface
: Set items
3.
Status information
Status
Description
New message
Message full
No device
Initializing
Searching
New message(s) arrived.
Indicates the (U)SIM’s storage
of SMS is full.
Indicates that system cannot find
the device.
Indicates that the device is in the
process of initializing.
The device is searching for the
network.
No service
No suitable network.
(U)SIM card not inserted or the
No (U)SIM card
device cannot recognized the
(U)SIM.
Invalid (U)SIM
card
Network signal
The (U)SIM is out of service.
Indicate the signal
strength of the network.
Network type
GSM/GPRS,
UMTS.
EDGE available,
Data service
HSPA
available.
4.
Indicator light description
State of indicator light
Description
Twist in multicolour circularly
Device initialization
Twist in red colour slowly
Abnormality of device
Twist in
green/blue/purple/yellow
slowly
Registered
HSPA/UMTS/EDGE/GPRS
Luminous continuously
Data transmitting
INTERNET SERVICE
1.
Connecting with the default connection profile
¾
to set up the
Click
connection;
2.
Connect to the internet with the user‐defined profile
¾
Click
¾
Click New, fill in all the parameters, then click ok.
¾
Click Import, Select one item from the list and click
, select Connection Profile;
OK.
Note: Contact with your service provider to get the
correct parameters.
3.
Statistics information
The following window will be displayed at lower right
corner of main interface when connecting to the
internet.
4.
Disconnect from the internet
Click
to disconnect the internet
connection.
SMS SERVICE
Click
to enter SMS (Short Message Service) service
interface.
1.
Creating and sending a message.
Click
¾
Input the recipient number by one of the following
options:
—
Enter the number directly;
—
Click Send to, choose the recipient number
from the phonebook and add to the sending
list , then click OK.
¾
Enter the message content;
¾
Click Send or Save to Draft. The message will be
saved in the Draft when failed to send.
Note:
You can group send a message at most 100
recipients;
Each number should be separated by “,”;
The message cannot expand 2,048 characters at
most.
2.
Inbox
¾
The following prompt box will be displayed when
received a new message;
10
¾
Reply
: Access the edit interface, write the
content, click Send or Save to Draft;
¾
Forward
¾
Delete
: Forward the selected message;
: Delete the selected message.
Note:
The new message will be saved in PC when 3.5G
Connect running only, else in (U)SIM instead;
You can use “Shift” or “Ctrl” to selected several
messages;
11
3.
Outbox
The message in the Outbox can be deleted or forwarded.
4.
Draft
¾
The MSG sent unsuccessfully will be saved in the
Draft .
¾
Click the selected message;
¾
Confirm the recipient and the content, and click
Send or Save to Draft.
5.
Recycle
All deleted information will be saved in the Recycle.
6.
The selected SMS can be operated as follows:
¾
Save number
12
To save the sender’s information to the (U)SIM
card or PC.
¾
Delete text message
To delete the selected message.
¾
Move to
To move the selected message to Outbox or Draft.
¾
Copy to
To copy the selected message to Outbox or Draft.
¾
SMS Export
Right‐click the selected the message;
Click SMS Export ;
Specify the path and the file name, and click
Save.
Note: The exported message will be saved as a *.csv file.
13
CONTACTS
Click
1.
to enter Contacts interface.
New
¾
Click
¾
Enter the Name and Mobile, and save it in the
(U)SIM card or PC.
2.
Search a contact
¾
Click
14
¾
Enter the key characters of you want to find in
the
¾
3.
The result will be displayed in turn.
View a contact
¾
Click Local or (U)SIM to display the contacts
interface accordingly;
¾
Select a contact, then you can operate as follows:
—
Edit
—
Delete
—
Send SMS
: Modify the selected contact;
: Delete the selected contact;
: Send a message to the
selected contact;
15
—
Copy to: Copy the contact between (U)SIM
card and PC.
Note: The deleted contact information cannot be
retrieved.
4.
Import
¾
Right‐click the mouse;
¾
Click Contacts Import;
¾
Select the *.vcf or *.csv
¾
The import file will be saved in the current
file and click Open;
interface.
5.
Export
¾
Right‐click the selected contact;
16
¾
Click Contacts Export;
¾
You can saved the contact file as *.csv file or *.vcf
file;
¾
Confirm the name and the path the file saved, then
click Save.
17
VOICE CALL
Click
1.
to enter voice call interface.
Dial operation
Enter voice call interface, you can enter the call number
by dial number pad, then click
to dial,
when connected you can click volume button to adjust
the volume; when you click
, you can
hangup the current call.
2.
Incoming call operation
The following prompt box will be displayed when
incoming call.
18
Click “Answer” button to answer the call; Click “Hangup”
button to reject the call
19
SETTINGS
Click
1.
to list the functions.
PIN Management
¾
Enable PIN
Click Enable PIN;
Enter the correct PIN code and click OK.
Note: The PIN code should be a numeric
string of 4‐8 digits.
¾
Disable PIN
Click Disable PIN;
20
z
¾
Enter the correct PIN code and click OK.
Modify PIN
Click Modify PIN;
Enter the old PIN code and new PIN code,
confirm the new PIN code and click OK.
2.
Connection Profile
Click the shortcut button, you can enter Profile
Management page to set APN information.
3.
Contacts Import
For more details, refer to Internet Contacts‐4.
4.
Contacts Export
For more details, refer to Internet Contacts‐5.
21
5.
SMS Export
For more details, refer to Internet Text Message‐5.
6.
7.
Help &About
¾
Help: To open the User Manual;
¾
About: To get the PC Suite software information.
Options
¾
General
You may choose the alert tone when
connected/disconnected to the internet.
¾
Text Message Setting
22
z
You may active the message alert tone, and
also can set up your favorite tone via
selecting a *.wav file in the PC.
The number showed in the SMS center is
read from the (U)SIM card automatically;
modification is not recommended;
Note: SMS would not work with the wrong SMSC.
Contact with the service provider to get the
correct SMSC.
You may select the period in the drop‐box, it
specifies the validity which the message
would save in the network;
Note: The validity setting of SMS should be
supported by the network.
¾
Profile Management
23
For more details, refer to Internet service‐2.
¾
Network
—
Network Type
You can choose Auto or Only UMTS/HSPA or
Only GPRS/EDGE. The device will register
network according to the selected mode.
The default mode is Auto.
—
Registration Mode
Auto search and register is set as
default value;
Select Manual search and register
before dialing, available networks will
be listed when finished;
24
z
Select an available network and click
Register, and then the device will try to
register.
¾
Statistics
—
Daily report
You can view every day’s network statistics
information.
—
Weekly report
You can view every week’s network statistics
information.
—
Monthly report
You can view every month’s network
statistics information.
25
—
Yearly report
You can view every year’s network statistics
information.
¾
Diagnostics
You can view device information, Operator
information, network status and so on
information.
¾
Language selection
You can switch different language.
8.
Show Menu Bar
You can display or hide the Menu Bar.
26
FAQS
1. Q: What shall I do if I cannot connect to the internet?
A: Open Settings‐>Connection Profile, confirm the APN
information right or not. For more details, contact with
your service provider.
2. Q: Why takes so long for installation?
A: According to the different hardware and software
environment, it would take a few minutes for installation.
3. Q: Why can’t I receive the message?
A: Please confirm whether the (U)SIM’s SMS memory is
full or not.
4. Q: Why can’t I register to the internet?
A: Open Settings‐>Network Selection, check the network
27
setting.
5. Q: Why the software doesn’t run automatically when the
device is plugged in?
A: Click My computer‐>data card disk‐>StartModem.exe.
Or run the 3.5G Connect from Start of the OS if 3.5G
Connect was installed.
28
The SAR limit set by the FCC is 1.6W/kg. The highest
SAR value for the USB Modem as reported to the FCC
when tested for use at the Laptop is 1.12W/kg.
Caution: Changes or modifications not expressly
approved by the manufacturer could void the user’s
authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
29
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
30
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV
technician for help.
31

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c320 44.284297, Sun Apr 15 2007 17:19:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2010:05:03 09:16:15+08:00
Create Date                     : 2010:05:03 09:05:32+08:00
Metadata Date                   : 2010:05:03 09:16:15+08:00
Format                          : application/pdf
Title                           : Microsoft Word - m950 UserManual.doc
Creator                         : hp
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:8c4d9297-b112-4114-8773-df0154791261
Instance ID                     : uuid:04caf273-187f-4f12-9dba-68f57c7f683e
Page Count                      : 32
Author                          : hp

EXIF Metadata provided by EXIF.tools