Viavi Solutions TBMTS5800V2 Multirate Handheld Telecommunications Tester (Ethernet, SONET, PDH) User Manual
Viavi Solutions Inc. Multirate Handheld Telecommunications Tester (Ethernet, SONET, PDH)
Contents
- 1. Safety Info
- 2. User Manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2203906 |
| Application ID | FwJ4WfpBl3xHpeSMdzGDcg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 5.38kB (67236 bits) |
| Date Submitted | 2014-02-28 00:00:00 |
| Date Available | 2014-02-28 00:00:00 |
| Creation Date | 2001-10-16 11:57:28 |
| Producing Software | Acrobat Distiller 11.0 (Windows) |
| Document Lastmod | 2014-01-27 10:11:29 |
| Document Title | T-BERD/MTS 5800 Ethernet Testing Manual - FRONTMATTER |
| Document Creator | FrameMaker 10.0.2 |
| Document Author: | JDSU |
T-BERD ⁄ MTS 8000, 6000A, and 5800 Multiple Services Application Module, 40/100G Transport Module, Dual Module Carrier, and Handheld Network Test Family Getting Started Manual Network and Service Enablement One Milestone Center Court Germantown, Maryland 20876-7100 USA Toll Free 1-855-ASK-JDSU • Tel +1-301-353-1560 • Fax +1-240-404-1996 www.jdsu.com Notice Every effort was made to ensure that the information in this document was accurate at the time of printing. However, information is subject to change without notice, and JDS Uniphase reserves the right to provide an addendum to this document with information not available at the time that this document was created. Copyright © Copyright 2014 JDS Uniphase Corporation. All rights reserved. JDSU, Network and Service Enablement, and the JDSU logo are trademarks of JDS Uniphase Corporation (“JDS Uniphase”). All other trademarks and registered trademarks are the property of their respective owners. No part of this manual may be reproduced or transmitted electronically or otherwise without written permission of the publisher. Copyright release Reproduction and distribution of this guide is authorized for Government purposes only. Trademarks JDSU Uniphase, JDSU, MTS 8000, T-BERD 8000, MTS 6000A, T-BERD 6000A, MTS 5800 and T-BERD 5800 are trademarks or registered trademarks of JDS Uniphase in the United States and/ or other countries. Bluetooth is a registered trademark of The Bluetooth SIG, Inc. in the United States and/or other countries. Specifications, terms, and conditions are subject to change without notice. All trademarks and registered trademarks are the property of their respective companies. Ordering information The catalog number for a printed getting started manual is ML-22046563. The catalog number for electronic manuals on USB is EML-22046537. Terms and conditions Specifications, terms, and conditions are subject to change without notice. The provision of hardware, services, and/or software are subject to JDSU’s standard terms and conditions, available at www.jdsu.com/terms. FCC Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case, the user will be required to correct the interference at this own expense. However, there is no guarantee that interference will not occur in a particular installation. ii MSAM, 40/100G Transport Module, DMC, and 5800 Getting Started Manual 2204561, Rev. 000 January 2014 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. In order to maintain compliance with the limits of a Class A digital device JDSU requires that quality interface cables be used when connecting to this equipment. Any changes or modifications not expressly approved by JDSU could void the user's authority to operate the equipment. Industry Canada Requirements This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. WEEE and Battery Directive Compliance JDSU has established processes in compliance with the Waste Electrical and Electronic Equipment (WEEE) Directive, 2002/96/EC, and the Battery Directive, 2006/66/EC. This product, and the batteries used to power the product, should not be disposed of as unsorted municipal waste and should be collected separately and disposed of according to your national regulations. In the European Union, all equipment and batteries purchased from JDSU after 200508-13 can be returned for disposal at the end of its useful life. JDSU will ensure that all waste equipment and batteries returned are reused, recycled, or disposed of in an environmentally friendly manner, and in compliance with all applicable national and international waste legislation. It is the responsibility of the equipment owner to return equipment and batteries to JDSU for appropriate disposal. If the equipment or battery was imported by a reseller whose name or logo is marked on the equipment or battery, then the owner should return the equipment or battery directly to the reseller. Instructions for returning waste equipment and batteries to JDSU can be found in the Environmental section of JDSU’s web site at www.jdsu.com. If you have questions concerning disposal of your equipment or batteries, contact JDSU’s WEEE Program Management team at WEEE.EMEA@jdsu.com. January 2014 MSAM, 40/100G Transport Module, DMC, and 5800 Getting Started Manual 2204561, Rev. 000 iii iv MSAM, 40/100G Transport Module, DMC, and 5800 Getting Started Manual 2204561, Rev. 000 January 2014
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : JDSU Create Date : 2001:10:16 11:57:28Z Modify Date : 2014:01:27 10:11:29-05:00 Language : en XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : JDSU Title : T-BERD/MTS 5800 Ethernet Testing Manual - FRONTMATTER Creator Tool : FrameMaker 10.0.2 Metadata Date : 2014:01:27 10:11:29-05:00 Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:64bb45a7-e8d6-4ac9-91b5-00d259b82455 Instance ID : uuid:9a00d5fe-e33e-404d-a833-9e4dbae2dd2f Page Mode : UseOutlines Page Count : 4 Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools