Victory Refrigeration Vf 1 Users Manual V Series Modified For End User Rev 01

VR-1 to the manual d6797b6b-07c1-a3e4-fd47-2be21208bf83

2015-02-03

: Victory-Refrigeration Victory-Refrigeration-Vf-1-Users-Manual-458430 victory-refrigeration-vf-1-users-manual-458430 victory-refrigeration pdf

Open the PDF directly: View PDF .
Page Count: 17

Download
Open PDF In Browser	View PDF

Refrigeration at its best

Installation, Operation and Troubleshooting Instructions
V- Series Reach-In Refrigerators & Freezers
For Models: VR-1, VR-2, VR-3, VR-1-G, VR-2-G, VF-1, VF-2, VF-3

Manual Part No. 50853202
Rev: 01
Print Date: 12/26/02

110 Woodcrest Road,
Phone: (856) 428- 4200

Cherry Hill, NJ 08003

Fax: (856) 428-7299

E-Mail: parts@victory-refrig.com

●

Website: www.victory-refrig.com

order-entry@victory-refrig.com

●

service@victory-refrig.com
PART OF AGA FOODSERVICE GROUP

Thank you for purchasing a Victory Refrigeration V-Series Refrigerator or Freezer! This
unit has passed our strict Quality Control Inspection and meets the high standards set
by Victory Refrigeration.

You have made a quality investment that with proper

maintenance will give you years of service.
Please read the following installation and maintenance instructions before installing or
using your unit.

If you have any questions, please call our Customer Service

Department at (856) 428-4200.

IMPORTANT INFORMATION - PLEASE READ
●

Please read these instructions carefully before installing or using. If recommended
procedures are not followed, warranty claims will be denied.

●

Your Warranty Registration information is located on the next page of this manual. Please
complete the card and submit it to Victory Refrigeration within 10 days of installation.
Failure to properly register equipment can void the warranty.

●

Victory Refrigeration reserves the right to change specifications and product design
without notice. Such revisions do not entitle the buyer to corresponding
changes, improvements, additions or replacements for previously purchased equipment.

●

A detailed Owners Manual with a troubleshooting guide, parts lists and additional
information can be ordered from the factory or may be downloaded free from the website at
www.victory-refrig.com.

Warranty
(Continental USA Only)
The Seller warrants to the original purchaser, equipment manufactured by Seller to be free from defects in material and
workmanship for which it is responsible. The Seller's obligation under this warranty shall be limited to replacing or
repairing at Seller's option, without charge, F.O.B. Sellers factory, any part found to be defective and any labor and
material expense incurred by Seller in repairing or replacing such part, such warranty to be limited to a period of one
year from date of purchase or thirteen months from date of shipment from Seller's factory, whichever is earlier, provided
terms of payment have been fully met. All labor shall be performed during regular working hours. Overtime premium
charges will be at Buyer's expense.
Proof of purchase must be supplied to Seller to validate warranty. This warranty is valid only if equipment is properly
installed, started-up and inspected by the dealer or authorized Victory Service agent.
Removal or alteration of the serial/data plate from any equipment shall be deemed to release Seller from all warranty
obligations or any other obligations, expressed or implied.
This warranty does not cover Thermostat or Defrost Timer calibration and/or adjustment, freight damage, normal
maintenance items outlined in Owner's Manual, adjustment of door mechanisms or replacement of light bulbs, fuses
or batteries.
Any repairs or replacement of defective parts shall be performed by Seller's authorized service personnel. Seller shall
not be responsible for any costs incurred if the work is performed by other than Seller's authorized service personnel.
Reimbursement claims for part(s) or labor service costs must be made in writing. Model, cabinet serial numbers and
installation location must be shown on the claim. A receipted bill from the servicing agency must accompany the claim,
together with full details of the service problems, diagnosis and work performed. Victory reserves sole discretion
whether further documentation on a claim is to be submitted.
Seller shall not be liable for consequential damages of any kind which occur during the course of installation of
equipment, or which result from the use or misuse by Buyer, its employees or others of the equipment supplied
hereunder, and Buyer's sole and exclusive remedy against Seller for any breach of the foregoing warranty or otherwise
shall be for the repair or replacement of the equipment or parts thereof affected by such breach.
The foregoing warranty shall be valid and binding upon Seller if and only if Buyer loads, operates and maintains the
equipment supplied hereunder in accordance with the instruction manual provided to Buyer. Seller does not guarantee
the process of manufacture by Buyer or the quality of product to be produced by the equipment supplied hereunder
and Seller shall not be liable for any prospective or lost product or profits of Buyer.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED
WARRANTIES WHATSOEVER. SPECIFICALLY THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY
OR OF FITNESS FOR A PARTICULAR PURPOSE.
The foregoing shall be Seller's sole and exclusive obligation and Buyer's sole and exclusive remedy for any action,
whether in breach of contract or negligence. In no event shall Seller be liable for a sum in excess of the purchase price
of the item.

You may register online at www.victory-refrig.com, fax this completed page to (856) 428-7299, or copy and mail form below to Victory.
*NOTE: The following mail-in form or online registration must be filled out and forwarded to Victory by the installer or customer within 10 days
after start-up. Failure to do this will invalidate the warranties. Retain this information for your records.

110 WOODCREST ROAD
CHERRY HILL, NJ 08003-3648
TEL: (856) 428-4200 ● FAX: (856) 428-7299

WARRANTIES NOT VALID UNLESS REGISTERED AT
FACTORY WITHIN 10 DAYS AFTER START-UP DATE.

Cabinet Model No.______________________
Cabinet Serial No._________________
(Data plate information located inside cooler on
the upper left wall)

ORIGINAL DATE OF INSTALLATION __________________________________________________________________
INSTALLATION COMPANY NAME ____________________________________________________________________
STREET _______________________________ CITY _____________________ STATE ______ ZIP CODE___________
DISTRIBUTOR’S NAME_____________________________________________________________________________
STREET _______________________________ CITY _____________________ STATE ______ ZIP CODE___________

INSTALLATION INSTRUCTIONS
Proper installation is the first step to operation. We recommend that your refrigerator or freezer be installed by
an authorized Victory Certified Installer.
Receiving Shipment
All units are performance tested and thoroughly inspected prior to shipment. Upon leaving the factory, all units are in
perfect condition. Upon receipt, examine the exterior of the shipment packaging for any signs of rough handling. If the
cabinet is damaged, it should be noted on the delivery slip or bill of lading and signed. A claim must be filed immediately
against the carrier indicating the extent and estimated cost of damage incurred.
Uncrating
Tools Needed : 3/4” Box Wrench

●

Adjustable Wrench

●

Level

WARNING: Never lay your refrigerator or freezer down on either its back, front or sides. This allows compressor oil into
the refrigerant lines which can damage the compressor at start-up. If the unit is laid down, it must be set upright for a
minimum of 12 hours before starting the compressor. Failure to adhere to the above recommendation will void the warranty.
1. Split plastic wrap along one of the cardboard posts. Remove and discard all packaging material, tape and interior
components.
2. Move cabinet as close to final location as possible before removing skid.
3. Remove the shipping skid by tipping the cabinet forward. Remove the shipping bolts with 3/4” box wrench while
the cabinet is held in one direction. Repeat this procedure while the cabinet is held in the opposite direction.
4. Use extreme caution when removing the wooden skid, especially when the last bolt is removed. If not properly
blocked, the skid will fall to the floor.
Locating Your New Storage Refrigerator or Freezer
Consider the following when selecting a location for your refrigerator or freezer:
1. Clearance - There must be a minimum clearance of 10” between the top of the refrigerator or freezer and the ceiling.
2. Floor Load - The floor on which the cabinet will rest must be free of vibration and suitably strong enough to support
the combined weights of the cabinet plus the maximum product load.
3. Ventilation - The air cooled, self-contained refrigerator or freezer requires a sufficient amount of cool, clean air. Avoid
placing the refrigerator near heat generating equipment such as ovens, ranges, heaters, fryers, steam kettles, etc., and
out of direct sunlight. Avoid locating the self-contained refrigerator in an unheated room, or where the room
temperature may be below 55 °F.
Installing Casters or Legs
Refrigerators and freezers are shipped with 1/2” single stud mounted legs or casters.
1. Casters / legs must be screwed by hand into the threaded holes located on the case bottom (*Note: Once the caster
cannot be turned, take a 3/4” box wrench and tighten the nut in between the mounting plate and wheel of the caster
until it is snug).
2. Tilt the cabinet in one direction approximately eight inches and block it securely with several pieces of 2 x 4 lumber or
other suitable material.
3. Screw in the two left or right casters / legs.
4. Repeat this procedure to install the other casters / legs.
Leveling
Cabinets must be leveled when installed. Failure to level your cabinet may result in doors not sealing, closing properly or
condensate water not draining properly.
Casters - Cabinets with casters can be leveled by placing large flat washers in between 1/2” stud and holes located
on the case bottom.
Legs - Rotate the foot of the leg with an adjustable wrench to achieve desired height for leveling.

Cabinet Cleaning
Prior to placing your new refrigerator and all shelves, pans and slides into operation, it is advisable that the interior be
washed thoroughly with a mild detergent and water solution. Rinse with clear water and a sanitizing solution. Allow cabinet
to air dry.
Installing Shelves
All cabinets with shelves are supplied with pilasters and shelf clip supports. Shelves are easily installed by inserting the
shelf support clips into the pilasters so they fit tightly. Align the shelf so the smaller fill wires run from front to rear and rest
the shelf on the clips.
Electric Supply
Wiring should be done by a qualified electrician in accordance with local electrical codes. A separate ground wire must
be supplied for all installations. A properly wired refrigerator or freezer will assure proper operation. Electrical supply
requirements are on the cabinet serial/data plate. It is recommended that a direct, properly protected line of the proper
size wire be installed from the main supply to your refrigerator or freezer. To assure that the correct voltage is being
supplied, while the refrigerator or freezer is in operation take a voltage reading at the motor-compressor electrical
connections, or as close to the motor-compressor as possible.
All refrigerator or freezer electrical systems are internally grounded.
Temperature Control
Temperature control should be set to maintain a temperature of 38°F (3.3°C) to 40°F (4.4°C) for refrigerators, and 0°F
(-17°C) to -5°F (-20.5°C) for freezers.
Adjusting Dial Thermometer (if required)
Check the cabinet temperature by using an accurate hand held dial or digital thermometer
placed next to the thermometer sensing bulb (located in the upper right hand corner of your
cabinet). If the dial thermometer on the cabinet grill matches the test thermometer (±1°F)
do not adjust.
If it does not match, remove the dial thermometer lens with a small screwdriver. To adjust
the temperature needle, insert a small screwdriver in the slotted screw on the needle. Hold
the wide end of the needle to keep it from moving and turn the screw clockwise or
counterclockwise to adjust as needed. Release the needle and remove the screwdriver.
Verify new needle setting with the test thermometer. Replace the dial thermometer lens.
Installing Replacement Door Gasket (if required)
Removing
Beginning at one corner, pry gasket loose from the retaining strip. Peel remainder of gasket from the door and discard.
Replacing
Before replacing, be sure the gasket and door are at room temperature. (If necessary, soak the gasket in
warmwater to make it more pliable.) Align new gasket frame on the door retainer strip. Starting at one corner,
press each corner of the gasket into the retainer strip. Once started, the gasket can be easily inserted around the entire
perimeter of the door by simply press rolling into place.
Installation Checklist
After the cabinet has been installed, leveled and cleaned as described, refer to the following checklist prior to start-up.
Check for proper electrical hook-up.
Check exposed refrigeration line connections for leaks. Make sure refrigeration lines are not dented, kinked or rubbing.
Check condenser fan for freedom to rotate without striking any stationary members.
Check that cabinet is level.
Product Load
After the refrigerator or freezer has been started and reaches the proper storage temperatures, food may be loaded. For
optimum energy efficiency, we recommend allowing a 1-1/2” clearance between the interior cabinet wall and product load.

PERIODIC MAINTENANCE

Cabinet Cleaning
Victory Refrigeration recommends periodic internal and exterior cleaning as outlined below.
Daily Exterior Cleaning
1. Clean surface with a sponge and cleaning solution. Use a non-abrasive cleaner that does not contain chlorine.
2. Polish with a soft cloth, wiping with the grain of the metal.
3. Once a week wipe with a film cutting agent to maintain shine.
Weekly Interior Cleaning
1. Remove all food, food related items and shelves.
2. Turn the unit off.
3. Remove loose food particles from interior floors, walls and ceiling.
4. Scrub all interior surfaces with warm detergent solution 100 °F - 120°F (38°C - 39°C) and a nylon bristled brush.
5. Rinse with clear water and allow to air dry.
6. Reinstall shelves.
7. Return power (electrical) to unit by resetting circuit breaker.
8. Return food to cabinet when temperature indicator reaches safety zone.
Condenser Maintenance
To keep your cabinet running efficiently, it is recommended that you clean the condenser once every three months.
However, once a month is recommended if the unit is located near cooking equipment which produces grease laden
vapors, i.e. fryers, grills, steam kettles, etc.
1. Disconnect power by switching circuit breaker to “OFF” position.
2. Remove the front grill by removing the two (2) screws on the inside of the grill at each end, then lift the panel up
and straight out.
3. Use a vacuum cleaner with proper brush attachments to clean the condenser, motor-compressor and related parts.
4. In extreme cases of dust and grease buildup, the condenser fins may require blowing out with compressed air or
cleaning with a degreasing agent.
5. Turn circuit breaker to “ON” position.

WARNING: Failure to keep condenser clean may cause premature failure of motor-compressor which
will NOT be covered by warranty.
Lubrication
Unless otherwise specified, all Victory refrigerators are equipped with oilless type motors. The motor-compressor is a
sealed unit and is constantly lubricated when in operation. The condenser and the evaporator motors are equipped with
lifetime oiled bearings which never need to be oiled.

BEFORE CALLING SERVICE GUIDE FOR COMMON PROBLEMS
Caution: Disconnect Power Supply Prior to Attempting Any Service!

Cabinet & Hinged Metal Door Parts

Item
1
2
3
4
5
6
7
8
8
9
10
10
10
10
10
10
10
10
11
11
11
11
12
13
13
14
15
15
16
17
17
18
19
20
21
22
23
24
25
26
27

Description
Door Hinge Assembly
Hinge Barrel
Hinge Cover
Hinge Base
Hinge Cam
Hinge Base Screw
Hinge Barrel Screw
Keeper, Single Door
Keeper, Double Door
Screw, Door Keeper
Door Assembly, RH Full Door w/ Rectangular Handle - * Prior to 9/3/02
Door Assembly, RH Full Door w/ Coved Handle - * After 9/3/02
Door Assembly, LH Full Door w/ Rectangular Handle - * Prior to 9/3/02
Door Assembly, LH Full Door w/ Coved Handle - * After 9/3/02
Door Assembly, LH Half Door w/ Rectangular Handle - * Prior to 9/3/02
Door Assembly, LH Half Door w/ Coved Handle - * After 9/3/02
Door Assembly, RH Half Door w/ Rectangular Handle -* Prior to 9/3/02
Door Assembly, RH Half Door w/ Coved Handle - * After 9/3/02
Door Gasket, Full - * Cabinets Built Prior to 9/3/02
Door Gasket, Full - * Cabinets Built After 9/3/02
Door Gasket, Half - * Cabinets Built Prior to 9/3/02
Door Gasket, Half - * Cabinets Built After 9/3/02
Retainer, Door Gasket (Top & Bottom)
Retainer, Door Gasket (Sides for Full Door)
Retainer, Door Gasket (Sides for Half Door)
Plugs
Door Pan, Full
Door Pan, Half
Lock & Key Set
Door Handle, Rectangular - * Cabinets Built Prior to 9/3/02
Door Handle, Coved - * Cabinets Built After 9/3/02
Breaker Strip, Top
Breaker Strip, Bottom
Breaker Strip, Side (Full & Half)
Bulb, Light
Socket, Light
Legs (Black in Color)
Casters, 5” Swivel (with Brake, 6” Overall Height)
Heater Wire, Door Frame
Shim, Fascia
Shim, Door

Part Number
10685101
50520102
50520105
50520103
50520106
50678801
50678801
01368801
01368802
50585702
10791102
10791109
10791101
10791110
10794105
10818203
10794106
10818204
50827801
50879501
50827802
50879502
50827701
50827601
50827602
50829101
50827901
50827902
50597107
50828001
50867701
90317003
90317002
90317001
50828801
50826601
50671801
50096002
50707501
50720701
50538601

Quantity
2 per door
1 per hinge assembly
1 per hinge assembly
1 per hinge assembly
1 per hinge assembly
3 per hinge assembly
2 per hinge assembly
1 per one & three section unit
1 per two & three section unit
2 per door keeper
per all standard section units
per all standard section units
1 per two & three section units
1 per two & three section units
* available upon request *
* available upon request *
* available upon request *
* available upon request *
1 per full length metal door
1 per full length metal door
* available upon request
* available upon request *
2 per full & half length door
2 per full length door
* available upon request *
* available upon request *
1 per full length door
* available upon request *
1 per door
1 per door
1 per door
1 per section
1 per section
2 per section
1 per unit
1 per unit
4 per unit
4 per unit
1 per section
* available upon request *
* available upon request *

*Note: All field replacement parts may not be stated on this parts list. For additional information or assistance, contact the factory.

Hinged Vision Panel Door Parts

Item
1
1
2
3
3
3
3
4
5
6
7
8
9
10
11

Description
Door Gasket, Full -* Cabinets Built Prior to 9/3/02
Door Gasket, Full -* Cabinets Built After 9/3/02
Lock & Key Set
Ass’y, LH Full Door w / Vision Panel & Rectangular Handle -* Prior to 9/3/02
Ass’y, LH Full Door w/ Vision Panel & Coved Handle - * After 9/3/02
Ass’y, RH Full Door w / Vision Panel & Rectangular Handle -* Prior to 9/3/02
Ass’y, RH Full Door w/ Vision Panel & Coved Handle -* After 9/3/02
Base, Hinge
Cam, Hinge
Base Screw, Hinge
Barrel, Hinge
Barrel Screw, Hinge
Cover, Hinge
Shim, Door
Hinge Assembly, Top or Bottom

Part Number
50827801
50879501
50597107
10791107
10818301
10791108
10818302
50520103
50520106
50678801
50520102
50678801
50520105
05312701
10685101

Quantity
1 per full length door
1 per full length door
1 per door
1 per cabinet section
1 per cabinet section
1 per cabinet section
1 per cabinet section
1 per hinge assembly
1 per door
3 per hinge assembly
1 per hinge assembly
2 per hinge assembly
1 per hinge assembly
*available upon request
2 per door

(*NOTE: WARRANTY DOES NOT COVER GLASS BREAKAGE! THE GLASS PANEL IS NOT SERVICEABLE. ENTIRE DOOR MUST BE REPLACED.)

Vision panel door is interchangeable with standard solid door. Door is left / right reversible
by inverting hinge mounting.
*Vision panel door is intended for operation in maximum 85° F, 55% RH environment for
refrigerated case (38° F) applications only!

Thermometer & Grill

Item
1
1
1
1
1
1
2
2
2
3
3
3
4
5
6
7
8
9
10
11

Description
Grill Assembly w/o Thermometer, 1 Section Refrigerator
Grill Assembly w/o Thermometer, 2 Section Refrigerator
Grill Assembly w/o Thermometer, 3 Section Refrigerator
Grill Assembly w/o Thermometer, 1 Section Freezer
Grill Assembly w/o Thermometer, 2 Section Freezer
Grill Assembly w/o Thermometer, 3 Section Freezer
“Victory” Logo -* for Cabinets Built Prior to 9/9/02
“Victory” Logo, Refrigerator - * for Cabinets Built After 9/9/02
“Victory” Logo, Freezer - * for Cabinets Built After 9/9/02
Thermometer, Refrigerator Dial
Thermometer, Freezer Dial
Thermometer, Refrigerator & Freezer
Screw
Bracket, Dial Thermometer Mounting
Screw, Thumb
Upper Case End
Brace, Upper Case End
Screw
End Panel, Field Replacement
Nut

Part Number
10809204
10809205
10809206
10809207
10809208
10809209
50853501
50883201
50883301
50827403
50827404
N/A
50267901
05315501
50684201
05315601
05315701
50692301
01333320
50081701

Quantity
1 per one section refrigerator unit
1 per two section refrigerator unit
1 per three section refrigerator unit
1 per one section freezer unit
1 per two section freezer unit
1 per three section freezer unit
1 per all refrigerator or freezer units
1 per all refrigerator units
1 per all freezer units
1 per all refrigerator units
1 per all freezer units
1 per all refrigerator or freezer units
4 per all refrigerator or freezer units
1 per all refrigerator or freezer units
1 per all refrigerator or freezer units
2 per all refrigerator or freezer units
2 per all refrigerator or freezer units
4 per Upper Case End Brace
2 per all refrigerator or freezer units
2 per all refrigerator or freezer units

Shelving & Accessories
Number of Sections
Item
No.
1

One Section

Two Section
Three Section
Part
Description
Section 1 Section 2 Section 1 Section 2 Section 3
No.
X
X
X
X
X
X
03221003 Aluminum Pilaster 9/32” Deep x
54-1/2” Long
1
X
X
X
X
X
X
03221004 Stainless Steel 9/32” Deep x
54-1/2” Long
2
X
X
X
X
X
X
50022501 Shelf Support Clip
2
X
X
X
X
X
X
50022601 Stainless Steel Shelf Support Clip
3
50597703
50597803 50597803 50597803 50597903 50597803
Stainless Steel Shelves
3
50597706
50597806 50597806 50597806 50597906 50597806
Epoxy Coated Shelves
50828401 Nylon Inserts
50828901 Tapping Screws
*Note: All field replacement parts may not be stated on this parts list. For additional information or assistance, contact the factory.

One Section Refrigerator Components
*Note: All field replacement parts
may not be stated on this
parts list. For additional
information or assistance,
contact the factory.

21
14
9

Electrical Box Assembly
Item
1
2
3
3
4
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

Part Number
10534201
10534102
50177401
50880201
50097901
50240301
50598001
50639801
04415201
04404803
10806901
50617101
50180701
10776901
50199002
50616201
10511103
50245001
50554302
50554303
50684401
50836801
50828201
50819901
50876101
50730801
50193101

Quantity
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
1
1
1
1
1
1
1

Two & Three Section Refrigerator Components
*Note: All field replacement parts
may not be stated on this
parts list. For additional
information or assistance,
contact the factory.

21
14
9

Electrical Box Assembly
Item
1
2
3
3
4
4
5
6
7
8
9
9
10
11
11
12
12
13
13
14
15
16
17
18
19
20
21
21
22
23
24
25

Description
Evaporator Housing Assembly
Evaporator Housing Assembly Cover
Screen, Vent - * for Cabinets Built Prior to 8/5/02
Bushing, Snap - * for Cabinets Built After 8/5/02
Vent, Breather - * for Cabinets Built Prior to 8/5/02
Bumper, Rubber - * for Cabinets Built After 8/5/02
Fan Blade, Evaporator
Fan Motor, Evaporator
Bracket, Evaporator Fan Motor
Fan Panel
Electrical Box Assembly, Two Section
Electrical Box Assembly, Three Section
Coil, Evaporator
Accumulator (for Two Section)
Accumulator (for Three Section)
Heat Exchanger (for Two Section)
Heat Exchanger (for Three Section)
Capillary Tube (for Two Section)
Capillary Tube (for Three Section)
Temperature Control
Drain Pan, Evaporator
Drain Line
Latch, Lock
Latch, Strike Hook
Terminal Board, 1 to 4
Cordset, Heater and Light
Harness, Cord and Plug 115v/15A, Two Section
Harness, Cord and Plug 115v/20A, Three Section
Harness, Condenser Unit Receptacle
Drain Pan, Condensate (not shown; for two section refrigerator only)
Liquid Line Dryer
Fan Motor, Condenser (not shown; for two section refrigerator only)

Part Number
10536801
10536902
50177401
50880201
50097901
50240301
50598001
50639801
04415201
04403702
10806901
10807001
50616801
50293701
50184101
10548601
10596201
50197601
50199001
50616201
10511104
50245001
50554302
50554303
50684401
50836801
50828201
50828202
50819901
50876101
50730801
50193101

Quantity
1
1
1
1
1
1
2
2
2
1
1
1
1
1
1
1
1
2
2
1
1
1
4
4
1
1
1
1
1
1
1
1

One Section Freezer Components
*Note: All field replacement parts
may not be stated on this
parts list. For additional
information or assistance,
contact the factory.

19
22

Electrical Box Assembly
Item
1
2
3
3
4
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

Description
Evaporator Housing Assembly
Evaporator Housing Assembly Cover
Screen, Vent - * for Cabinets Built Prior to 8/5/02
Bushing, Snap - * for Cabinets Built After 8/5/02
Vent, Breather - * for Cabinets Built Prior to 8/5/02
Bumper, Rubber - * for Cabinets Built After 8/5/02
Fan Blade, Evaporator
Fan Motor, Evaporator
Bracket, Evaporator Fan Motor
Fan Panel
Electrical Box Assembly
Coil, Evaporator
Accumulator
Heat Exchanger
Capillary Tube
Temperature Control
Drain Pan, Evaporator
Drain Line
Latch, Lock
Latch, Strike Hook
Terminal Board, 1 to 4
Cordset, Heater and Light
Harness, Cord and Plug 115v/15A
Harness, Condenser Unit Receptacle
Drain Pan, Condensate (not shown)
Defrost Timer
Heater Safety (2 wire)
Probe Bracket
Junction Block
Fan Delay (3 wire)
Defrost Heater
Liquid Line Dryer
Power Relay

Part Number
10534201
10534102
50177401
50880201
50097901
50240301
50598001
50639801
04415201
04404803
10806301
50617201
50180701
10723101
50793601
50616101
10511103
50245001
50554302
50554303
50684401
50836801
50828201
50837101
N/A
50197302
50599401
50244101
50606001
50599501
50620501
50730801
50369401

Quantity
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
4
4
1
1
1
1
1
1
1
1
1
1
1
1

Two & Three Section Freezer Components
*Note: All field replacement parts
may not be stated on this
parts list. For additional
information or assistance,
contact the factory.

14
19
21

Electrical Box Assembly
Item
1
2
3
3
4
4
5
6
7
8
9
9
10
11
12
12
13
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

Description
Evaporator Housing Assembly
Evaporator Housing Assembly Cover
Screen, Vent - * for Cabinets Built Prior to 8/5/02
Bushing, Snap - * for Cabinets Built After 8/5/02
Vent, Breather - * for Cabinets Built Prior to 8/5/02
Bumper, Rubber - * for Cabinets Built After 8/5/02
Fan Blade, Evaporator
Fan Motor, Evaporator
Bracket, Evaporator Fan Motor
Fan Panel
Electrical Box Assembly (refer to “Electrical Assembly with Figure 6-5)
Electrical Box Assembly, Three Section
Coil, Evaporator
Accumulator
Heat Exchanger, Two Section
Heat Exchanger, Three Section
Capillary Tube
Capillary Tube
Temperature Control
Drain Pan, Evaporator
Drain Line
Latch, Lock
Latch, Strike Hook
Terminal Board, 1 to 4
Cordset, Heater and Light
Harness, Cord and Plug 115v/15A
Harness, Condenser Unit Receptacle
Drain Pan, Condensate (not shown)
Defrost Timer
Heater Safety (2 wire)
Probe Bracket
Junction Block
Fan Delay (3 wire)
Defrost Heater
Liquid Line Dryer
Power Relay

Part Number
10536801
10536902
50177401
50880201
50097901
50240301
50598001
50639801
04415201
04403702
10806301
10806401
50616901
50181401
10738401
10768601
50198902
50793501
50616101
10511104
50245001
50554302
50554303
50684401
50836801
50828201
50837101
N/A
50197302
50599401
50244101
50606001
50599501
50596301
50730801
50369401

Quantity
1
1
1
1
1
1
2
2
2
1
1
1
1
1
1
1
2
2
1
1
1
4
4
1
1
1
1
1
1
1
1
1
1
1
1

1, 2 & 3 Section Refrigerator Wiring Diagram

1, 2 & 3 Section Freezer Wiring Diagram

Victory Refrigeration Inc
110 Woodcrest Road
Cherry Hill, NJ 08003-3648
Tel: (856) 428-4200
Fax: (856) 428-7299
Web: www.victory-refrig.com
E-mail: service@ victory-refrig.com
or
parts@victory-refrig.com

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2003:01:02 15:13:27Z
Modify Date                     : 2005:07:01 08:07:26-04:00
Page Count                      : 17
Creation Date                   : 2003:01:02 15:13:27Z
Mod Date                        : 2005:07:01 08:07:26-04:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : djohnson
Metadata Date                   : 2005:07:01 08:07:26-04:00
Creator                         : djohnson
Title                           : V-Series Modified Manual for End User Rev 01.qxd
Has XFA                         : No

EXIF Metadata provided by EXIF.tools

Victory Refrigeration Vf 1 Users Manual V Series Modified For End User Rev 01

VR-1 to the manual d6797b6b-07c1-a3e4-fd47-2be21208bf83

Navigation menu

Versions of this User Manual:

Views

Navigation