Vidonn Information Technology F1 Wireless Bone Conduction Headphones User Manual

Shenzhen Vidonn Information Technology Co., Ltd. Wireless Bone Conduction Headphones

User manual

Vidonn F1 Manual Home： VIDONN F1 Wireless bone conduction sport headphone User guide Settings： 1. Charge Charge the headphones with the included MicroUSB charging cable. The LED indicator will turn blue from red when charging is complete. 2. Pair While off, press and hold the power button for 5 seconds to enter pairing mode, the LED indicator will flash blue and red repeatedly while in discovery. 3. Connect In pairing mode, enable the Bluetooth settings in your device and select “Vidonn F1”, VidonnF1 will be connected with in seconds and there is a voice prompt by the word “connected”. Multifunction Button Function Action Prompt voice Play/pause music Click once None Skip to next song Double-click while music is playing None Answer/end call Click once One beep Reject a call Press and hold for 3 seconds One beep Low power alert （Less than 30%） Battery low Restore to factory settings Press and hold both volume down button and multifunction button Two beeps Volume Up/Power Button(B) Volume Down Button(C) Function Action Prompt voice Power on/ff Press and hold power button for 3 seconds Power on/Power off Turn up the volume Click the volume up button to adjust volume There is one beep if reach maximum
Enter into pairing mode Press and hold the volume up button until the LED flashes red and blue alternately Pairing Turn down the volume Click the volume down button to adjust volume There is one beep if reach minimum LED indicator Status LED display status Charging Solid red Charging complete Solid blue Power on Flash blue once Power off Flash red once Pairing mode Flash red and blue Pairing complete flash blue slowly Unpaired Flash red slowly Playing music Breathing blue Incoming call Solid blue Low battery Flash red slowly How to reset your headphones Enter pairing mode, then press multifunction button and both volume up button simultaneously for 3 seconds. Storage and maintenance ◆ Storage the headphones in cool and dry place, the working temperature should be 0-45℃（32-113℉）. Working in cold/hot environment or highly humid area may reduce the life of battery. ◆ After storage for a long time period, please charge the headphones before using again. ◆ The headphones are water resistant, but are NOT waterproof, please DO NOT submerse the headphone in water. ◆ Listening with headphones at high volume may affect your hearing and the audio will be distorted. ◆ Clean the headphone with a soft and dry cloth. ◆ Do not charge right after exercising, in case there is sweat inside the charging port, which could lead to circuit burning while charging, keep the charging port dry before connecting to charger will reduce the risk.
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Shenzhen Vidonn Information Technology Co., Ltd. Address: 7F China Economy & Trade Building, 18 Zizhu 7 Road, Futian, Shenzhen, 518040 China Customer service：400 065 8805 Email：info@vidonn.com www.vidonn.com

Navigation menu