Vision Fitness R1400 Users Manual R1415 Assy3

R1400 to the manual b4f5a461-5c5b-4744-aab8-cb221630f3d8

: Vision-Fitness Vision-Fitness-R1400-Users-Manual-457008 vision-fitness-r1400-users-manual-457008 vision-fitness pdf

Open the PDF directly: View PDF .
Page Count: 3

SW8 Lock Washer

Quantity: 4

5mm T-Shaped Wrench 17mm/15mm Pedal Wrench

Screwdriver

5mm L-Shaped Wrench

TOOLS & PARTS INCLUDED

4mm L-Shaped Wrench

ORANGE BAG

HARDWARE INCLUDED

M8 x 15L Bolt

Quantity: 2

R1500 Only

SW8 Lock Washer

Quantity: 2

R1500 Only

PARTS BOX

Power Supply

Water Bottle and Cage

Color Coded Hardware Bags

Assembly Guide

Owners Manual

Warranty Card

500 South CP Avenue • P.O. Box 280 • Lake Mills. WI 53551

toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373

www.visionfitness.com

©2006 Vision Fitness. All Rights Reserved. 8.06

AG18.40PRD

REV3

starts

vision

with a

it all

PINK BAG

Assembly

Guide

R1400 AND R1500

SEMI-RECUMBENT FITNESS BIKES

GREEN BAG

M8 x 15L Bolt

Quantity: 4

M8 x 10L Set Screw

Quantity:1

BLUE BAG

Wire Grip

Quantity: 1

M5 x 10L Bolt

Quantity: 1

Rubber Stopper

Quantity: 1

BLACK BAG

M8 x 15L Bolt

Quantity: 4

SW8 Lock Washer

Quantity: 4

M6 x 35L Bolt

Quantity: 8

M6 Arc Washer

Quantity: 8

M8 x 15L Bolt

Quantity: 4

SW8 Lock Washer

Quantity: 4

M8 x 15L Bolt

Quantity: 3

SW8 Lock Washer

Quantity: 3

M8 x 20L Bolt

Quantity: 2

R1500 Only

SW8 Lock Washer

Quantity: 2

R1500 Only

SW8 Lock Washer

Quantity: 4

5mm T-Shaped Wrench 17mm/15mm Pedal Wrench

Screwdriver

5mm L-Shaped Wrench

TOOLS & PARTS INCLUDED

4mm L-Shaped Wrench

ORANGE BAG

HARDWARE INCLUDED

M8 x 15L Bolt

Quantity: 2

R1500 Only

SW8 Lock Washer

Quantity: 2

R1500 Only

PARTS BOX

Power Supply

Water Bottle and Cage

Color Coded Hardware Bags

Assembly Guide

Owners Manual

Warranty Card

500 South CP Avenue • P.O. Box 280 • Lake Mills. WI 53551

toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373

www.visionfitness.com

©2006 Vision Fitness. All Rights Reserved. 8.06

AG18.40PRD

REV3

starts

vision

with a

it all

PINK BAG

Assembly

Guide

R1400 AND R1500

SEMI-RECUMBENT FITNESS BIKES

GREEN BAG

M8 x 15L Bolt

Quantity: 4

M8 x 10L Set Screw

Quantity:1

BLUE BAG

Wire Grip

Quantity: 1

M5 x 10L Bolt

Quantity: 1

Rubber Stopper

Quantity: 1

BLACK BAG

M8 x 15L Bolt

Quantity: 4

SW8 Lock Washer

Quantity: 4

M6 x 35L Bolt

Quantity: 8

M6 Arc Washer

Quantity: 8

M8 x 15L Bolt

Quantity: 4

SW8 Lock Washer

Quantity: 4

M8 x 15L Bolt

Quantity: 3

SW8 Lock Washer

Quantity: 3

M8 x 20L Bolt

Quantity: 2

R1500 Only

SW8 Lock Washer

Quantity: 2

R1500 Only

3

STEP

• Connect the heart rate wires

coming from the seat rail to the heart

rate wires coming from the main

frame.

• As you slide the seat rail onto the

seat rail bracket, slide any excess

heart rate wire into the seat rail

bracket. Slide the seat rail on so the

holes on the bottom of the bracket are

in line with the frame. Insert three

(M8x15L) bolts with three (SW8) lock

washers into the holes for support. Do

not tighten completely.

• R1500 ONLY: Connect the bottom

frame support tube to the bottom of

the rear support foot with two

(M8x20L) bolts and two (SW8) lock

washers. Tighten with the 5mm T-handle

wrench.

• Go back and tighten all bolts with the

5mm T-handle or 5mm L-shaped wrench.

PINK BAG

6

STEP

• Attach left and right pedal straps to

left and right pedals.

• Attach left and right pedals to left

and right crank arms. NOTE: both

pedals and crank arms should be

labeled left or right. Tighten with the

included pedal wrench.

• Plug in power supply to power

socket on the front side of the bike.

PEDALS

6

STEP

1

STEP

• R1500 ONLY: Connect bottom

frame support tube to main frame with

two (M8x15L) bolts and two (SW8)

lock washers. Tighten with the 5mm

T-handle wrench.

ORANGE BAG

To avoid possible damage to this Fitness Bike, please follow these assembly steps in the correct order.

Before proceeding, find your new Fitness Bike’s serial number located on the front axle tube, and enter

here:

Refer to this number when calling for service, and enter this serial number on your Warranty Card and in

your own records. Be sure to read your Owner’s Guide before using your new Fitness Bike.

If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12

NOTE: It is recommended that you apply grease to the threads of each bolt and screw as you assemble

your Fitness Bike to prevent loosening and noise. Also, during each assembly step, ensure that ALL bolts

and screws are in place and partially threaded in before completely tightening any ONE bolt or screw.

Assembly

Guide

R1400 AND R1500

SEMI-RECUMBENT FITNESS BIKES

3

STEP

4

STEP

• Slide the console mast cover onto the

console mast.

• Wrap the wire tie that comes from the

bottom of the console mast around the

end of console cable and around the

heart rate wires that are sitting in the

frame console mast bracket. Slowly pull

the wire tie up through the console mast

until the cable and wires come through

the top of the mast. Slide the bottom of

the console mast over the frame mast

bracket. Holding the mast straight, insert

the (M8x10L) set screw into the front

side of the mast and tighten with the

4mm L-shaped wrench. Secure the mast

to the frame with four (M8x15L) bolts

and four (SW8) lock washers on the

sides of the mast and tighten with the

5mm T-handle wrench.

• Remove the four bolts from the back

side of the console. Plug the console

cable and heart rate wires into the back

side of the console. Place the console

onto the mounting plate of the console

mast and re-insert the four mounting

bolts. Tighten with the screwdriver.

• Remove the two bolts from the

backside of the console mast. Attach

the water bottle cage to the mast with

these two bolts. Tighten with the

screwdriver. Insert water bottle.

GREEN BAG

Console Mast

Cover

Console Mast

Water Bottle

Cage

Console Mast

Bracket

2

STEP

• Attach rear support foot to the

bottom of the seat rail with four

(M8x15L) bolts and four (SW8) lock

washers. Do not tighten completely.

• Slide the seat frame onto the seat rail.

Make sure the flat side of the clamp

block rests against the bottom of the

seat rail. Also make sure the adjustment

handle is facing forward.

• Insert the heart rate wires located

under the seat frame through the hole

on the bottom of the seat rail and push

them toward the front of the rail. Take

the end of the heart rate wires that run

through the seat rail and insert them

through the hole in the bracket at the

end of the rail. Snap the wire grip

around the end of the heart rate wires

and snap it into place in the bracket.

• Attach the rubber stopper to the

bottom of the seat rail with the

(M5x10L) bolt. Tighten with the

screwdriver.

BLUE BAG

5

STEP

BLACK BAG

Seat Rail

Wire Grip

Rubber Stopper

2

STEP

1

STEP

4

STEP

5

STEP

Bottom Frame

Support Tube

R1500 ONLY

Seat Frame

Heart Rate

Wires

Heart Rate

Wires

Rear Support

Foot

Heart Rate

Wires

Seat Rail

Bracket

Handlebar

• Connect the Heart Rate wires from the

seat handlebar to the heart rate wires

from the seat frame. Attach seat

handlebar to seat frame with four

(M8x15L) bolts and four (SW8) lock

washers. Tighten with 5mm T-shaped

wrench.

• Attach seat bottom cushion to seat

frame with four (M6x35L) bolts and four

(M6) arc washers. Tighten with the

4mm L-shaped wrench.

• Attach the seat back cushion to the

seat frame with four (M6x35L) bolts and

four (M6) arc washers. Tighten with the

4mm L-shaped wrench.