Vitelcom Mobile Technology SP-100 TRI-BAND GSM 850/1800/1900 MHz MOBILE PHONE User Manual 6p 70p
Vitelcom Mobile Technology, S.A. TRI-BAND GSM 850/1800/1900 MHz MOBILE PHONE 6p 70p
Contents
- 1. Users Manual 1 of 2
- 2. Users Manual 2 of 2
Users Manual 1 of 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 591815 |
| Application ID | MnOFDbJ6WCcVBdnJx4rtkw== |
| Document Description | Users Manual 1 of 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 297.64kB (3720474 bits) |
| Date Submitted | 2005-10-14 00:00:00 |
| Date Available | 2005-10-13 00:00:00 |
| Creation Date | 2005-10-14 16:12:49 |
| Producing Software | Acrobat PDFWriter 5.0 for Windows NT |
| Document Lastmod | 2005-10-14 16:13:18 |
| Document Title | 6p~70p.doc |
| Document Creator | 6p~70p - Microsoft Word |
| Document Author: | 박태훈 |
Telephone 1. On/Off button Press ( ) button to turn the mobile phone on or off. Press this button to finish the call. If the button is pressed for long, you will be back to the previous screen from the present screen where a certain menu is applied. 2. Move button Keep pressing ( ) button to move to the mobile phone menu. Press Move button downwar d to display the menu where SMS message can be sent. On the basic screen press Move button upward to display the call records. 3. Buttons 0 ~ 9 are used for number, text and sign. * and # buttons have various functions, which are used on the phone menu. 4. Select button Left ( ) and Right ( positioned right above. ) Select buttons are used to perform the option Ref) Select button is displayed in capital letters in thick color in this manual. For example, ACEPTAR (Confirm) 5. Call button Press the phone number and then Call ( to the number. - 11 - ) button to start to make a call Introduction Installation of SIM card Prior to installation of SIM card, make sure the mobile phone is powered off and then remove the battery. Since the SIM card can be easily damaged if scratched or bent, be careful when installing on or removing from the phone. 1. Let the back of the phone directed toward the user, and press the open lever (as pointed by the arrow in the figure). The battery is put together with the cover as a single unit. 2. Take the battery out as shown in the figure. 3. Let the yellow connector of the SIM card directed downward as shown in the figure and then put inside onto the corner. Ref) Hold and take out the SIM card carefully to remove from the slot. 4. Install the battery. - 12 - Charging the battery 1. Insert the charger as shown in the figure. (The phone is available during charging the battery.) If the mobile phone is turned off, the sign “Battery being charged” will be displayed continuously. 2. If the battery is charged, it will not blink as in the figure of the screen. In order to remove the battery, hold and press the both ends of the charger to take out. - 13 - Phone ON/OFF In order to turn the phone on or off, keep pressing ( ). Start If the phone is turned off, 8-digit password will be required. Input the password and press OK button. If the date is correct, press OK button , if not, input new date and time and then press OK button. Main screen Ref) For 1 minute and 30 seconds after the phone turned on, its image and menu may be displayed later than usual, which is because the menu setting environment needs such time when the menu is not visible. After this period of time, the speed will be back to normal condition. Stand-by screen is displayed if the phone is ready to answer and make the phone call. The stand-by screen is divided into 4 icon areas. • Icon area: displays each different icon used to show the state of the phone. - 14 - • User’s option screen area: displays connection status to the communication network including service provider and service type. • Date & time area: shows the present time year, month and day. • Functions key area: shows Select keys. Directory allows you to move to the directory if the button pressed. Menu shows the main menu if the button pressed. Press the downward arrow to move to a new text message. Press the upward arrow to display the calling list menu. You will mainly use the arrow keys with these functions available. Keep pressing End button to turn the phone off. Press Call (green) button to move to the call records screen. Press the number you want to make a call to and then press Call (green) button. Keep pressing a number button where a phone number is saved if you want to make a call thereto. Keep pressing «*»button to set the lock. Keep pressing «#»button to display «Notice mode» menu in the sound setting environment. You can set the notice mode as desired. Press «1» on the basic screen to make a call to voice message box. - 15 - Icons used on the basic screen 1) Battery capacity 2) Frequency strength 3) Receive new text message 4) Notice message, message box capacity insufficient 5) Receive new voice message 6) Battery left 7) Roaming 8) Alarm & Schedule notice 9) Bell mode 10) Vibration mode 11) Bell-vibration mode 12) Mute - 16 - Make a call In order to make a call, press the number on the stand-by screen and then press Call(green) ( ) button. If a wrong number has been pressed, press Clear (CLR) button to delete the wrong number. Press End (red) ( ) button to finish the call. Answer the phone Press Call(Answer) ( Press End/Start ( ) button to answer the phone. ) button not to answer the phone. Setting the manner mode This function is designed to mute the sound of the bell or the melody for you to answer the phone while not turned off. Through the mute function, the user can make the phone call sound mute or withhold the notice function if a call comes in when the user is not available. - 17 - Basic menu In the stand-by state, pres s Menu button to go to the basic menu. The basic menu includes details of Menu with all available functions. Press Up/Down Move button to go to the desired type of menu. In addition, with the menu button being pressed, press the applicable number to go to the category for the number. Figures of icons, names of categories and description of each menu and shortcut buttons are as follows; Lock keypad Keep pressing ( ) the button to lock the keypad. Press Cancel button and ( ) button to cancel Lock. - 18 - Structure of function menu Customer service Charge • Operator • Check balance • Change payment system • Other cards • Advance-paid card 2424 service Movistar menu Leisure • Fortune • Movies, TV • Humor • Daily bible • Self therapy News Chatting • Chatting information • Chatting channel • Go chatting On-line game • Game of the month • Finding game • Catalog Roaming • Roaming1 • Roaming2 Emergency • Ambulance • Fire engine • Police car Details New • Assistant • Stock market • Find roads • Phone • Movies • Drugstore • ATM • Flight information • Tractor • Police • Restaurants • Domestic news • International news • Soccer • Sports • Economic news • Science technology • Restriction • Edit • Delete • Copy to FDN Send message Directory Make a call Find Delete Delete all Message received Message sent Message Write message Change • • • • • Answer Resend Delete Delete all Extract number • • • • Edit Send Delete Delete all • Message center • Change voice message box • Term of validity Receive • Available • Unavailable Channel • Add • Execute SMS CB * Contact your communication provider and ask if the service is available. - 19 - List In absence • • • • • Details Send message Save Make a call Delete Receive • • • • • Details Send message Save Make a call Delete Send • • • • • Details Send message Save Make a call Delete • • • • Delete in-absencecall Delete received call Delete sent call Delete all Counter Delete call list Add new event Event Go to • • • • Alarm Meeting Birthday Notice Delete past event Calendar View calendar Day with event Delete all events Exit Today Date Calculator Time Standard area Standard city Standard summer time • Available • Unavailable E-book (Tool) Local time Local time Local summer time World time Date format Time format Games • 24 hours • 12 hours Snake • Level • Rules Memorice • Rules Video poker • Rules - 20 - • Available • Unavailable Volume • Speaker • Bell Bell sound Volume Notice mode Message bell sound • Available • Unavailable Button sound • Available • Unavailable Error sound • Available • Unavailable Connectionsound • Available • Unavailable • Bell • Vibration • Bell & Vibration • Mute Background lighting Screen • Always off • 5, 10, 15, 30 s ec. • Always on Background brightness Stand-by screen Change Melody & Bell • Digital clock • World time Receive with key • Available • Unavailable Auto resend • Available • Unavailable Calling time sound • Available • Unavailable Call Shortcut dial Language • Auto • English • Spanish Key lock • Unavailable • Available Default setting Lock PIN code • Available • Unavailable Change PIN 1 code Security Change PIN2 code Only F.D.N. F.D.N . Number - 21 - • Available • Unavailable • • • • • • • Details New Send message Make a call Find Delete Delete all Available Receive all Unavailable • To voice message box • To call list • To other number Status Available Receive during call Unavailable • To voice message box • To call list • To other number Status Available Receive calls Receive if not answered Unavailable • To voice messa ge box • To call list • To other number Status Available Out of service area Unavailable Call sent • Available • Unavailable • Status International call • Available • Unavailable • Status Status International call except the place of origin Restrict calls • Available • Unavailable • Status Call received • Available • Unavailable • Status International call received • Available • Unavailable • Status Cancel all Services Change password Call stand-by • Available • Unavailable • Status Display sent number • Status Hide sender • Available • Unavailable Select type • Auto • Manual Display sender Communication network Preference My number • Add • Edit • Delete - 22 - • To voice message box • To call list • To other number Directory Press Directory button on the menu to go to the window where the directory is saved. (or, press Select button after moving to the directory by pressing Menu button on the basic screen.) The phone has two different directories. 1. SIM card directory 2. FDN directory (fixed the phone number) For more information on FDN directory, refer to Chapter. SIM directory is composed of the following items. • 14-charac ter name • 20-digit number 50 FDN phone numbers can be saved in the SIM directory of the phone. New save Names and phone numbers can be saved in the SIM directory. On the basic screen press Menu to move to Directory, and press Select button to display saved name list. If there is no saved name, the sign “Empty directory” will be displayed on the screen. - 23 - If the directory is not empty 1. Press Option button on the directory menu. 2. Move to the new item and Press Select button. 3. Input the name and Press OK button. • When inputting a name, use ( ) button. Press the button st nd rd once to input the 1 text, twice to input the 2 text, 3 times to input the 3 th text and 4 times to input the 4 text as desired. • Pressing ( ) button for long or short to change to a capital letter, a small letter or a number for sentence type. Select type will be displayed as in Ab, ab, AB, or 123. • If an empty space is needed, press ( ) button. The symbols in the ) stand for space, @ / 1. • If input incorrectly, it can be deleted to the left direction of the cursor by pressing the but ton ( ) as many times as desired. Keep pressing ) button to delete all the text on the screen. • Use Move button to move the cursor to the left or to the right. 4. Input the desired phone number along with its applicable district number and then press OK button . - 24 - If the directory is empty 1. Press New on the directory menu and press Select button . 2. Input the name and press OK button. 3. Input the phone number and press OK button . Ref) Quick save- Press the phone number on the basic screen and then press Save button. Input the name and press OK button. Ref) Keep pressing ( ) button to display the list of special characters. . , ¿? _ ! ‘ ” - + * = ( ) [ ] < > { } | # $ % : ; ^ \ & ~ ￥ Ç @ ¡ / - 25 - Tecla Press Press Press Press Press Press times times times times times times Space A/a B/b C/c Á/á A/a D/d E/e F/f É/é D/d G/g H/h I/I I/? G/g J/j K/k L/l J/j K/k M/m N/n Ññ O/o Ó/ó P/q Q/q R/r S/s P/p T/t U/u V/v Ú/ú Ü/ü W/w X/x Y/y Z/z W/w Space Space Space Space Space Space Short Press: Input text type (Ab, ab, AB, 1) Long Press: makes Predictive Dictionary available or unavailable. Short Press: selects special characters. - 26 - View directory details Specific details of the directory are available as specified below; 1. Select the directory menu. 2. The list of names will be displayed on the directory menu. 3. Use the move keys to select a desired item and then press Option button. 4. Select details item and then press Select button. Names and phone numbers will be displayed. Use the move keys to go to the next item from the directory. Ref) Press End button to return to the main screen. Find a specific item You can find a specific item in the directory using the following procedures. 1. Select the menu. 2. The name list will be displayed on the directory menu. 3. Press Option button. 4. Select Find item and then press Select button . - 27 - Edit items 1. Select the directory menu. 2. The name list will be displayed on the directory menu. 3. Select a desired item to edit and then press Option button . 4. Press Select button on the details item. 5. Press Option button on the details screen. 6. Move to Edit item and then press Select button. 7. Edit the name and then press OK button. 8. Edit the phone number and then press OK button . Make a call from the directory 1. 2. 3. 4. Select the directory menu. The name list will be displayed on the directory menu. Use the move keys to select the name to make a call to. Press Call (green) button to make a call. - 28 - Send a text message through the selected item 1. The name list will be displayed on the directory menu. 2. Use the move keys to select the name to send a message to. 3. Press Option button and move up to Send message item. 4. For more information on Send text message, refer to Send a new text message. Delete one item in the SIM directory 1. 2. 3. 4. 5. Select the directory menu. Press Option button. Select Erase and then press Select button. Confirmation window will be displayed. Press OK button . Delete all items in the SIM directory 1. 2. 3. 4. 5. Select the directory menu. Press Option button. Select Erase All. Confirmation window will be displayed. Press OK button . - 29 - Message Text message Send a new text message 1. Press Menu button on the basic screen to go to the message menu and then press Select button. 2. Move to New Message from the message menu and then press Select button. 3. Input the desired number or use the directory button to find the number to input. Move to the desired item and then press Select button. Press OK button. And its edit is available before pressing OK button. 4. Select a commonly used message expression on the list and press Select button. If commonly used message expressions are not necessary, select None. 5. Messages can be input on the text screen. After inputting, press OK button. 6. Option to send and save. • Select Send if you want to send the message and then press Select button. • Select Save if you want not to send but to save the message and then press Select button. - 30 - View a new message If a message is received, the phone lets you know a text message has arrived by setting tone in the device. You can check the message promptly by pressing View button or later by pressing Previous button. Pressing Previous button will display an envelope icon to let you know there are one or more messages not read on the main screen. Received box Received box is a place where all the received messages (SMS) are received and saved, which includes the list of received messages. The list displays the icon for message status (read, not read) and the number of the sender. Icons used to display message status in the received box are as follows; ) This icon shows that the message in the received box is not read yet. ) This icon shows that the message in the received box has been read. View messages from received box 1. Press Menu on the basic screen to go to Message item and then press Select button. 2. Move to the received message box from the message menu and then press Select. 3 . Move to the desired message from the list and then press Option button. 4. Move to View and press Select button. - 31 - Send a reply 1. Press Menu button on the basic screen to go to the message menu and then press Select button. 2. Move to the received box item from the mess age menu and then press Select button. 3. Move to the desired message from the list and then press Option button. 4. Go to View option and press Select button . Press Option button on the message details screen and move to Send a reply. Press Select button. Select None if you don’t want to use the previously prepared message. 5. Input the message on the text input window and then press OK button. 6. Option to send and save. • Select Send if you want to send the message and then press Select button. • Select Save if you want not to send but to save the message and then press Select button. Resend the message 1. Press Menu button on the basic screen to go to the message menu and then press Select button. 2. Move to the received box item from the message menu and then press Select button. 3. Move to the desired message from the list and then press Option button. 4. Go to View option and press Select button . Press Option button on the message details screen and move to Resend. Press Select button . Input the message on the text input window and then press OK button . 5. Option to send and save. • Select Send if you want to send the message and then press Select button. • Select Save if you want not to send but to save the message and then press Select button. - 32 - Make a call to the number of message sender 1. Press Menu button on the basic screen to go to the message menu and then press Select button. 2. Move to the received box item from the message menu and then press Select button. 3. Move to the desired message from the list and then press Option button. 4. Go to View option and press Select button . 5. Press Option button and move to Call. And press Select button. Delete messages in the received box 1. Press Menu button on the basic screen to go to the message menu and then press Select button. 2. Move to the received box item from the message menu and then press Select button. 3. Move to the desired message from the list and then press Option button. Go to Delete and press Select button. 4. Press OK button . Extract the phone number This function is used to extract the desired number from the text message. 1. Press Menu button on the basic screen to go to the message menu and then press Select button.. 2. Move to the received box item from the message menu and then press Select button. 3. Move to the desired message from the list and then press Option button. 4. Go to View option and press Select button . 5. Press Option button and move to Extract. If the number is once extracted, you can make a call and send a message to the number and save the number as well. - 33 - Sent Box Sent Box is a place where all the sent messages are made and saved. Icons used to display message status in the sent box are as follows; ) Message not sent. ) Message sent. Send the message saved in the sent box. 1. Press Menu button on the basic screen to go to the message menu and then press Select button. 2. Move to the sent box from the message menu and then press Select button. 3. Move to the desired message from the list and then press Option button. 4. Go to View option and press Select button . 5. Press Option button. 6. Select Send to send the message. Edit the message saved in the sent box. 1. Press Menu button on the basic screen to go to the message menu and then press Select button. 2. Move to the sent box from the message menu and then press Select button. 3. Move to the desired message from the list and then press Option button. 4. Go to View option and press Select button . 5. Press Option button. 6. Select Edit Option to edit the message. - 34 - Setting message box environment Through the environment setting menu of the message box, you can specify the number of the voice messages and text messages in the box and change the term of validity of messages. Change the number of text messages in the box 1. Press Menu button on the basic screen to go to the message menu and then press Select button. 2. Go to Change menu list and press Select button. 3. Select the option of the message box and press Select button . 4. Input the desired number of messages in the box and then press OK button. Change the number of voice messages in the box 1. Press Menu button on the basic screen to go to the message menu and then press Select button. 2. Go to Change menu list and press Select button. 3. Select the option of the voice message box and press Select button. 4. Input the desired number of voice messages in the box and then press OK button. Change the term of validity of messages 1. Press Menu button on the basic screen to go to the message menu and then press Select button. 2. Go to Change menu list and press Select button. 3. Select the option of the term of validity and press Select button. 4. Input the desired term of validity and press OK button. - 35 - SMS CB (Callback) SMS CB message SMS CB environment setting Environment setting of SMS CB option can be specified through this menu. Check this service is available from your communication service provider. This service is available only when provided through the communication network of its provider. SMS CB service available/unavailable 1. Press Menu on the basic screen to move to the message item and then press Select button . 2. Go to SMS CB list item and press Select button. 3. Select Receive option and press Select button. 4. Select Available/Unavailable. Channel available/unavailable 1. Press Menu on the basic screen to move to the message item and then press Select button . 2. Go to SMS CB list item and pres s Select button. 3. Select Channel option and press Select button. 4. Select the desired channel and press Option button . 5. Go to Available/Unavailable menu list to make it available or unavailable. Add new channel 1. Press Menu on the basic screen to move to the message item and then press Select button . 2. Go to SMS CB list item and press Select button. 3. Select Channel option and press Select button. 4. Press the option button. 5. Select Add and press Select button . 6. Input the channel number and press OK button. 7. Input the channel name and press OK button. - 36 - List You can refer to information of previously received calls, sent calls and calls in absence. Press Menu on the basic screen to move to the call list and then press Select button. Sent call list 10 sent calls are saved in the sent call list. Select the sent call list on the call list menu to display the list of calls you have sent. View sent call details You can find details of name, number, calling time, date and time. • Use the move keys to go to the sent call list and press Select button. • Move to the desired number and press Option button. • Go to the details item and press Select button . Make a call from the sent call list • Use the move keys to go to the sent call list and press Select button . Go to the desired number and press Call (green) button. Save the sent call list number in the directory • Use the move keys to go to the sent call list and press Select button. - 37 - • Move to the selected number and press Option button. • Use the move keys to go to Save item and press Select button. Delete the sent call list number You can delete one or all numbers from the sent call list. Delete individual number from the sent call list • Use the move keys to go to the desired number to delete from the sent call list, and press Option button. • Go to Delete item and press Select button. • If the confirmation window is displayed, press OK button to execute Delete. Delete all numbers from the sent call list • Press Select button on the list menu. • Move to Delete item from the call list and press Select button. • Select Delete the sent calls on the list and press Select button . • If the confirmation window is displayed, press OK button to delete all the sent calls on the list. Received call list 10 received calls are saved in the sent call list. Select the received call list on the call list menu to display the list of calls you have received. View received call details You can find details of name, number, calling time, date and time of the received calls. - 38 - • Use the move keys to go to the received call list and press Select button. • Move to the desired number and press Option button. • Go to the details item and press Select button. Make a call from the received call list • Use the move keys to go to the rec eived call list and press Select button. Go to the desired number and press Call (green) button. Save the received call list number in the directory • Use the move keys to select the received call list number. • And press Option button. • Use the move keys to go to Save item and press Select button. Delete the received call list number You can delete one or all numbers from the received call list. Delete individual number from the received call list • Use the move keys to go to the desired number to delete from the received call list, and press Option button . • Go to Delete item and press Select button . • If the confirmation window is displayed, press OK button to execute Delete. Delete all numbers from the received call list • Press Select button on the list menu. • Move to Delete item from the call list and press Select button . • If the confirmation window is displayed, press OK button to delete all the sent calls on the list. - 39 - Call list in absence 10 calls in absence are saved in the in-absence call list. Select the in-absence call list on the call list menu to display the list of calls you have not received. View in-absence call details You can find details of name, number, date and time of the received calls. • Use the move keys to go to the in-absence call list and press Option button. • Go to the details item and press Select button . Make a call from the in-absence call list • Use the move keys to go to the in-absence call list and press Select button. Go to the desired number and press Call (green) button. Save the in-absence call list number in the directory • Use the move keys to select the in-absence call list number. • Press Select on the desired number to save and press Option . • Use the move keys to go to Save item and press Select button. Delete the in-absence call list number You can delete one or all numbers from the in-absence call list. Delete individual number from the in-absence call list • Use the move keys to go to the desired number to delete from the inabsence call list, and press Option button . • Go to Delete item and press Select button. • If the confirmation window is displayed, press OK button to execute Delete. - 40 - Delete all numbers from the in-absence call list • Move to Delete item from the call list and press Select button. • Select Delete the in-absence call list and press Select button. • If the confirmation window is displayed, press OK button to delete all the calls on the list. Delete all the call records • Select Delete call list on the list menu. • Use the move keys to select Delete all the list and press Select button. • If the confirmation window is displayed, press OK button to delete all the call records on the list. Calling time gauge Information of each calling time is displayed through the sub-menu of the calling time gauge. Calling time of the last call and all the received/sent calls are saved in the gauge. Press Restart button to initialize the calling time of the last call and received/sent calls. If the confirmation window is displayed, press OK button to restart the gauge. - 41 - E-book (tool) Calendar Various kinds of alarms are available for this phone. If an alarm bell rings at a specific time, a message will be displayed on the phone. 1. Press Menu button on the basic screen to move to E-book and press Select button. 2. Go to the calendar and press Select button. 3. Press Select button on Event item. 4. Press Add. 5. Select Alarm option (or desired type of event). 6. Input the desired message and press OK button . 7. Input the desired alarm time and press OK button. 8. If you want a single alarm bell, select «Once», and if you want daily alarm bells at a specific time selec t «Daily » and then press Select button. If an event is added, its details and options of Edit/Delete can be specified. 1. Press Menu button on the basic screen to move to E-book and press Select button. 2. Go to the calendar and press Select button. 3. Press Select button on Event item. 4. Move to the desired event and press Option button. 5. Select the desired item (Details, Send or Delete). Additional options of the event are also available, and one or all the events can be deleted on a specific date. 1. Press Menu button on the basic screen to move to E-book and press Select button. - 42 -
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-701 Modify Date : 2005:10:14 16:13:18+02:00 Create Date : 2005:10:14 16:12:49+02:00 Metadata Date : 2005:10:14 16:13:18+02:00 Creator Tool : 6p~70p - Microsoft Word Format : application/pdf Title : 6p~70p.doc Creator : 박태훈 Document ID : uuid:d82ac370-f9c4-4d40-88e2-f51a6f278a9c Instance ID : uuid:a27d7f00-81ea-4e22-b99c-64f22033f7b2 Producer : Acrobat PDFWriter 5.0 for Windows NT Has XFA : No Page Count : 32 Author : 박태훈EXIF Metadata provided by EXIF.tools