Vivitar Vivicam 46 Users Manual 9112 Digital Camera
Vivitar-Vivicam-46-Users-Manual-799296 vivitar-vivicam-46-users-manual-799296
Digital Camera 25 ViviCam_46_Camera_Manual
ViviCam 46 - User Manual VC_46_eng Free User Guide for Vivitar Camera, Manual
2015-07-15
: Vivitar Vivitar-Vivicam-46-Users-Manual-772474 vivitar-vivicam-46-users-manual-772474 vivitar pdf
Open the PDF directly: View PDF 
.
Page Count: 27
| Download | |
| Open PDF In Browser | View PDF |
ViviCam 46 Digital Camera User Manual © 2009-2012 Sakar International, Inc. All rights reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective companies. Table of Contents Introduction .................................................................................................................................. 2 What’s Included ............................................................................................................................ 2 Parts of the Camera ..................................................................................................................... 3 Initial Camera Setup ..................................................................................................................... 4 Main Camera Modes .................................................................................................................... 7 Camera Technical Specifications .................................................................................................. 8 Computer System Requirements ................................................................................................. 9 Powering the Camera On/Off ..................................................................................................... 10 Camera Mode ............................................................................................................................. 11 Video Mode ................................................................................................................................ 15 Playback Mode ........................................................................................................................... 17 Installing the Software ................................................................................................................ 20 Connecting the Camera to the Computer ................................................................................... 21 Getting Photos and Videos from your Camera to Your Computer .............................................. 22 Get Started! ................................................................................................................................ 23 Transferring Images from my Camera to my Computer Manually .............................................. 23 Camera Maintenance ................................................................................................................. 25 Sakar Warranty Card .................................................................................................................. 25 Technical Support ....................................................................................................................... 26 Troubleshooting .......................................................................................................................... 26 1 Introduction Thank you for purchasing this camera. Everything you need to take quality digital photos and videos is included with your camera. Vivitar makes capturing those special moments as easy as possible. Please read this manual carefully first in order to get the most out of your digital camera. Note: Your camera needs an SD Memory card (up to 32GB) for normal use. SD Memory cards are not included and need to be purchased separately. What’s Included 1. Digital Camera 2. USB cable 3. Vivitar Experience Image Manager Software Installation CD 4. Wrist Strap Note: SD Memory Card and batteries not included. 2 Parts of the Camera 1. Power Button 8. Down / Playback Button 2. Shutter Button 9. Up Button 3. LCD Screen 10. SD Memory Card Slot 4. LED 11. Wrist Strap Connector 5. W / Zoom Out 12. USB Port 6. T / Zoom In 13. Tripod Socket 7. MENU Button 14. Digital Lens Note: The battery compartment is located beneath the front cover of the camera. 3 Initial Camera Setup Installing the Batteries Installing the Memory Card Slide off the front cover and insert 2 x AAA (1.5V) batteries. Alkaline batteries recommended (not included). Turning On the Camera SD Memory card (up to 32GB) needed for normal use. Using the Camera 4 Powering the Camera ON 1) Batteries Slide the front cover of your camera towards the right to reveal and open the battery compartment. Make sure to properly insert the batteries into your digital camera, according to the polarity shown inside the battery compartment. Use 2 x AAA (1.5V) batteries. Alkaline batteries are recommended. (Batteries not included.) Place the camera front cover on the front of the camera and slide the camera front cover towards the left to securely close the cover back into place. A click will be heard once the camera front cover has been locked into place. Note: Remove the batteries from the camera when not in use for an extended period. Do not mix alkaline and non-alkaline batteries. Some features will not work if the battery power level is low. When the battery power is low the battery icon turns red and the camera will automatically turn off a few seconds later. Rechargeable batteries not recommended. The energy status of the power is displayed on LCD as shown below: Full battery power 2) Medium battery power Low battery power SD Card Make sure an SD card has been properly inserted into your camera. (SD card not included.) To properly insert the SD Card: Push the SD card into the slot in the direction shown on the camera (see SD icon by the SD card slot). Push the SD card until you hear a slight clicking sound. This indicates the SD card has been inserted correctly. 5 Note: After the camera is powered on, an SD icon will appear on the LCD display. If you do not see the SD icon on the display, please check if the card was inserted properly. Make sure the SD card is not locked (check the lock switch on the side of the SD card). If the SD card is locked this will prevent the camera from saving captured photos to the SD card. 3) Power On Press the POWER button to turn on the camera. 6 Main Camera Modes Your camera has different modes for the various camera functions. You can switch modes by pressing the MENU button on your camera after the camera has been powered ON. Photo Capture Mode Use this mode to capture pictures with your camera. This is the default mode when the camera is powered ON. To take a picture, aim your camera as desired and press the Shutter button. The picture will be automatically saved to your camera’s memory card. To access the various menus for the Photo Capture Mode, press the MENU button. Video Capture Mode Use this mode to capture videos with your digital camera. After turning on your camera, press the MENU button to open the ‘MODE’ and select ‘AVI’. To take a video, aim your camera as desired and press the Shutter button to start the record. A red record indicator will appear on the LCD screen while record is in progress. To stop the record, press the Shutter button again. The video will be automatically saved to your camera’s memory card. To access the various menus for the Video Capture Mode, press the MENU button. Playback Mode (Photos & Videos) Use this mode to view and manage the photos and videos on your camera. After turning on your camera, press the PLAYBACK button to open the Playback mode for photos and videos. You can scroll through the photos and videos that you’ve previously taken to view, edit or delete them as desired. To access the various menus for the Playback mode for photos and videos, press the MENU button while in the Playback mode. 7 Camera Technical Specifications Image Sensor CMOS 2304X1728(4 M) / 2048x1536(3M) / Image Resolution 1920x1080(2M-HD) / 640x480(VGA) Video Resolution 640x480 VGA, 320x240 QVGA File Format JPEG (Photo) /AVI (Video) Internal Memory 1 Test Photo Use Only External Memory SD Card (up to 32GB) LCD Display 1.5”TFT Lens f=7.7 mm Zoom 4X Digital Zoom F3.0 English, French, Spanish, Portuguese, German, Language Dutch, Italian, Russian, Turkish Print Yes Exposure Auto White Balance Auto ISO Auto Scene Auto Auto Power Off 60 second default Self-Timer 10 seconds, Off Interface USB 2.0 Windows XP (SP 3), Vista (SP1) and 7 ; System Requirements Mac OSX v10.5.x and above Battery 2 * AAA (1.5V) batteries Working Temperature 0~40C 8 Computer System Requirements WINDOWS OS To be able to download photos and videos to your PC using the Vivitar Experience Image Manager Software, you will need the following minimum configuration: Microsoft® Windows XP with Service Pack 3, Windows Vista with Service Pack 1 or Windows 7 Pentium® 4 processor (or above) 1 GB of RAM, with 250 MB of free hard disk space 16-bit Color monitor, 1024 X 768 recommended screen resolution CD-ROM Drive QuickTime® 6 or higher Microsoft® Internet Explorer 7 or higher Windows Media Player 10 or higher DirectX 9 or higher Internet connection required MACINTOSH OS To be able to download photos and videos to your Macintosh using the Vivitar Experience Image Manager Software, you will need the following minimum configuration: Intel processor running Mac OS X v10.5.x or later 1 GB RAM, 250 MB free hard disk space Display: 1024 x 768 or higher-resolution monitor QuickTime® 6 or higher CD-ROM Drive Internet connection required 9 Powering the Camera On/Off Make sure the batteries have been inserted properly into your digital camera. If your camera comes with a rechargeable lithium battery, make sure it is fully charged before the first use. Make sure an SD card has been inserted into your camera. (SD card up to 32GB - SD Card not included) Please see Initial Camera Setup for more information. Powering the camera ON Press the Power button to turn your camera ON. After powering on, the camera emits a sound and the LED light turns on briefly. The LCD screen turns on with your camera in Photo Capture mode to start. Powering the camera OFF While the camera is on, you can press the Power button again at any point to turn your camera OFF. A “Goodbye” screen appears and then the camera will power off completely. Note: Your digital camera also has an Auto Power Off feature that will automatically turn off your camera after 1 minute. 10 Photo Capture Mode The Photo Capture mode allows you to capture pictures with your digital camera. This is the default mode when the camera is powered on. Taking photos 1) Power on your camera. The default mode is Camera mode. 2) Hold the camera steady and compose your photo using the LCD screen. 3) Press the Shutter button and wait a moment for the photo to be taken. If you have changed the camera mode and would like to return to the Photo Capture Mode: 1) Press the Menu button. 2) Press the Up/Down button and select MODE. 3) Press the Shutter button. 4) Press the Up/Down button and select SINGLE. 5) Press the Shutter button again to confirm. You are now in default camera mode. Note: When the internal memory is full, the LCD screen will display “Memory Full! Insert a SD Memory Card to Transfer and Take More Photos!” If you attempt to take photos or videos when the camera’s internal memory is full, the camera will beep continuously. Please download the test images to your computer using the Vivitar Experience Image Manager software as described below in the section “Transfer photos and videos to your computer” as soon as possible or insert an SD memory card in order to take more images! Digital Zoom function You can magnify your subject using the digital zoom. Use the T and W buttons to adjust the zoom. 1) Press the T button to zoom in on your subject. 2) Press the W button to zoom back out. 11 Self Timer The Self Timer menu allows you to set a delay between the time that the camera’s Shutter button is pressed and the actual capture of the picture. This is an optimal feature if you don’t just want to take the picture but would also like to be in the picture yourself. Just set the Self Timer delay, press the Shutter button on your camera and position yourself in front of the camera as desired. It is recommended that you use a tripod when you use the Self Timer. 1) Press the Menu button. 2) Press the Up/Down button and select MODE. 3) Press the Shutter button. 4) Press the Up/Down button and select SELF. 5) Press the Shutter button again to confirm. An icon will appear on the top left corner of the LCD. 6) Press the Shutter button to begin taking the photo. Your camera will emit beeps and after a count-down of 10 seconds the photo will be taken. Change Image Resolution The Image Resolution menu allows you to choose the desired size of the images taken by your camera. Keep in mind that images with a higher resolution will also take up more of your camera’s memory. 1) Press the Menu button. 2) Press the Up/Down button to select the RESOLUTION option. 3) Press the Shutter button. 4) Press the Up/Down button to select one of the following resolutions: 4M/3M/2M/VGA. 5) Press the Shutter button again to confirm your selection. 6) The corresponding icon will appear on the LCD screen. 12 Note: Different image resolutions will affect the photo quality. High resolution photos will be of better picture quality and therefore will take up more camera memory capacity than lower resolution photos. In order to change the image resolution setting to take high resolution photos, an SD memory card needs to be inserted. Frequency Settings The options in the Frequency menu represent the frequency of the electrical current in fluorescent lighting sources in your locale. If your camera is set to a frequency that does not match your country’s electric current, you may see waves on the images taken by your camera. 50Hz – UK, Europe and Australia 60Hz – US, Canada and South America 1) Press the Menu button. 2) Press the Up/Down button to select the FREQUENCY option. 3) Press the Shutter button. 4) Press the Up/Down button to select 50HZ or 60HZ. 5) Press the Shutter button to confirm. Anti-Shake Function The Anti-Shake feature reduces image distortion that can be caused by movement of the camera while capturing the image. 1) Press the Menu button. 2) Press the Up/Down button and select the ANTI-SHAKE option. 3) Press the Shutter button. 4) Use the Up/Down button to select either: “ON” to turn the Anti-Shake on. “OFF” to leave or turn the Anti-Shake off. 5) Press the Shutter button to confirm. 13 Language Setting You can select your camera’s language setting by selecting the desired language from the Language menu. 1) Press the Menu button. 2) Press the Up/Down button and select LANGUAGE. 3) Press the Shutter button. 4) Press the Up/Down button to select from the following options: English, French, Spanish, Portuguese, German Dutch, Italian, Russian, Turkish 5) Press the Shutter button to confirm. Default Setting Use this menu to reset your camera settings to the original Factory Default Settings. 1) Press the Menu button. 2) Press the Up/Down button and select DEFAULT. 3) Press the Shutter button. 4) Press the Up/Down button to select “Yes” or “No”. 5) Press the Shutter button to confirm. 14 Video Capture Mode The Video Capture Mode allows you to capture videos with your digital camera. When the camera is first powered ON, the camera will be in Photo Capture Mode. To set your camera to Video Mode: 1) Power on your camera. 2) Press the Menu button. 3) Press the Up/Down button to select MODE. 4) Press the Shutter button. 5) Press the Up/Down button again to select the AVI option. 6) Press the Shutter button again to confirm. A video icon appears on the upper left corner of the LCD. 7) Press the Shutter button to start shooting the video. The elapsed time appears on the bottom right of the LCD. For the duration of the recording the LED indicator light will continue to flicker and a red indicator blinks on the LCD screen. 8) Press the Shutter button to stop the recording. 9) The video will be saved as an AVI file on the SD memory card. Note: “Memory Full Insert an SD Memory Card” appears on the LCD screen if you press the Shutter button without having inserting the SD memory card into your camera. To capture your videos, insert the SD memory card into your camera. Change Image Resolution 1) Select the Video (AVI) Mode option (see steps above for instructions). 2) Press the Menu button. 3) Press the Up/Down button to select the RESOLUTION option. 4) Press the Shutter button. 5) Press the Up/Down button to select one of the following resolutions: VGA or QVGA. 15 6) Press the Shutter button again to confirm your selection. 7) The corresponding icon appears on the LCD screen. Note: Different image resolutions will affect the video quality. High resolution videos will be of better picture quality and therefore will take up more camera memory capacity than lower resolution videos. In order to change the image resolution setting to take high resolution photos, an SD memory card needs to be inserted. 16 Playback Mode The Playback Mode allows you to review and delete photos and videos that you’ve already taken with your camera. When you first turn on the camera, the camera will be in Photo Capture mode by default. Press the Playback button to open the Playback Mode. The latest captured image appears on the LCD screen. If there are no images stored, a message (No File) appears. 1) Power on your camera. 2) Press the Down/Playback button to enter the Playback Mode. 3) The Playback icon 4) Press the Shutter button to exit to return to Photo Capture Mode. appears on the upper left corner of the LCD. Preview Photos To view your captured photos: 1) Press the Down/Playback button to enter Playback Mode. 2) Press the Up/Down button to select and view your photos (and videos). 3) “JPG” appears on the image if you have selected a photo. “AVI” appears on the LCD when you select an AVI file. 4) To zoom into your selected photo: Press the T button to zoom. Press the W button to zoom out. Press the Up/Down button to move up or down within your zoomed in photo. Playback Video (AVI) files 1) Press the Down/Playback button to enter Playback Mode. 2) Select an AVI file in your SD memory card by pressing the Up/Down button. 3) Press the Menu button. 4) Press the Up/Down button to select the PLAY option. 17 5) Press the Shutter button to start playing. 6) Press the Shutter button again to stop playing. Thumbnail View Easily navigate and select the image you wish to view by using the Thumbnail View. The images on your camera will be displayed in a 3 X 3 matrix where you can use the direction buttons to scroll and select images from the thumbnails. 1) Press the W/Zoom Out button All the images on your camera will appear in the Thumbnail View. 2) Use the Up/Down button to scroll and select the image you wish to view. 3) Press the Shutter button to enlarge the image to full size. 4) Once the selected video or photo is full size you can play and view the video or magnify the photo. Delete Photos and/or Videos You may delete images directly from the memory card on your camera. The images can only be deleted while in the Playback mode. 1) In Playback mode, select the image you would like to delete. 2) Press the Menu button. 3) Press the Up/Down button to select DELETE. Press the Shutter button and select one of the following options: “Delete One” in order to delete the selected image (photo or video). “Delete All” to delete all the files (photos and videos) saved to your SD memory card. 1) Press the Shutter button. 2) Press the Up/Down button to select either “Yes” or “No”. 3) Press the Shutter button again to confirm your choice. If you choose “Yes” the current file is permanently deleted. This action is irreversible. 18 Format You can use the Format Memory Card menu to delete all of the content that is currently on your camera’s memory card. Keep in mind that formatting the memory card will permanently delete all of the content on your camera’s memory card. This option will delete all of the content at one time. If you would like to delete individual images, use the DELETE menu in the camera’s Playback mode. Note: Restoring factory defaults or formatting the camera may result in the loss of data. Please ensure you have backed up your images before you attempt this. Please ensure you have backed up all important files before you proceed with formatting. 1) Press the Down/Playback button to opent the Playback Mode. 2) Press the Menu button. 3) Press the Up/Down button to select the FORMAT option. 4) Press the Menu button. 5) Press the Up/Down button to select either “Yes” or “No”. 6) Press the Shutter button again to confirm your selection. 7) A “No File” message appears on the LCD once the format has completed. Print your photos Your camera supports the PictBridge printing function that allows you to print photos any time directly from the camera’s memory to a connected printer. 1) In the Playback mode press the Up/Down button to select a photo you would like to print. 2) Press the Menu button. 3) Press the Up/Down button to select the PRINTER option. 4) Press the Shutter button. 5) You will be asked to connect the camera to a printer. A “Please connect your DSC to printer” message will appear on the LCD. 6) Connect your camera to any PictBridge compatible printer to continue with the printing. 7) Press the Shutter button to start printing the selected photo. 19 N Installing the Software You must be connected to the internet to install and run the Vivitar Experience Image Manager software. 1) Insert the installation CD into your CD-ROM drive. The installation screen should automatically open. 2) On PC: The Vivitar Experience Image Manager Installer window appears. If the window does not appear, open the application’s CD/DVD drive and click on “Setup.exe” to launch the installer. 3) On Macintosh: Click the icon that appears on the desktop to install the Vivitar Experience Image Manager. 4) If you do not have internet access at the time of inserting the CD-ROM, connect to the internet and then click the “Install Vivitar Experience Image Manager” button to begin the installation. Note: If you do not have internet access, you can still download media from the camera. Click the “How to transfer photos and videos from my camera to my computer” button for instructions. 20 5) If you have internet access, the “Choose your language” window opens, choose your language and click “Next” to open the next window. 6) Select your camera model from the list and click “Next” to open the next window. 7) Click “Next” to confirm your camera model selection and to install the application. 8) Please wait while the application is being installed on your computer. 9) Please review the license terms. On PC and Macintosh: Click the “I accept the terms of this license agreement” and then click “Next” to continue. 10) On PC only: Let the “Vivitar Experience Image Manager” installer create the folder to where the program will be installed, and then click “Install”. 11) Please wait while the application continues the installation process on your computer. 12) On PC: Click the “Close” button when the installation is complete. Click the “Launch Vivitar Experience Image Manager” to open the application. 13) On Macintosh: Click the “Quit” button when the installation is complete. Click the “Launch Vivitar Experience Image Manager” to open the application. 14) If you close the application you can run the Vivitar Experience Image Manager from the Programs (PC) or Applications (Mac) menu on your computer. Connecting the Camera to the Computer 1) Use the USB cable that came with your camera to connect your camera to your computer. 2) Power the camera ON. 3) The first time you connect the device to the computer you will have to wait a few seconds until the computer recognizes the device. 21 Getting Photos and Videos from your Camera to Your Computer An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way to your computer. 1) Select the “Get Images” button from the Main menu. 2) The “Get media from device” window opens. 3) You can select to download photos, videos or both. 4) Select your camera (removable disk) from the device window. If your camera is the only USB device connected then it will be selected automatically. 5) Select a location on the computer where to place the new photo and video files. 6) Add the new photo and video files to albums if desired. 7) Select to remove the media files from the selected device (removable disk) after the import. 8) Click the “Get Media” button to transfer the photos and videos from your camera to your computer. 9) A media download progress bar appears on the bottom left showing the number of media files downloading to your computer. A message appears when the download is complete. 10) The photo and video files that you selected are now downloaded to your computer to the selected folder and albums ready for your use. 22 Get Started! Using the Vivitar Experience Image Manager, you can: Upload and manage photos and videos to and from the most popular photo sharing and social networking sites - Facebook, Flickr, Picasa, MySpace, Photobucket, Twitpic, Twitgoo and YouTube Seamlessly transfer photos and videos from one social network to another Organize your images by creating offline and online albums Edit images using automatic and manual tools Use automatic “Geotagging” with built in Google Maps For more details on how to use the Vivitar Experience Image Manager open the “Help” from the menu option or click the “Take a Tour” button on the application’s Home screen. Transferring Images from my Camera to my Computer Manually Transferring Photos and Videos: WINDOWS 1) Use the USB cable that came with your camera to connect your camera to your computer. 2) MSDC appears on the LCD. 3) A window appears with a list of options, select “Open folder to view files” and click OK. 4) Open the DCIM folder and the folder inside to view the media files. 5) Select the media and copy the files from this folder into your computer. Optionally, select the files and choose Copy from the Edit menu. Then select a folder and choose Paste from the Edit menu. 6) We recommend that you copy the images into the Pictures/My Pictures folder and the videos into the Videos/My Videos folder. 7) Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way to your computer. 23 Transferring Photos and Videos: MACINTOSH 1) Use the USB cable that came with your camera to connect your camera to your computer. 2) MSDC appears on the LCD. 3) The camera’s device icon appears on the desktop. 4) Click on the device icon and open the DCIM folder and the folder inside to view the media files. 5) Select the files and drag them into your computer. Optionally, select the files and choose Copy from the Finder’s Edit menu. Then select a folder and choose Paste from the Edit menu. 6) We recommend that you copy the images into the Pictures folder and the videos into the Movies folder. 7) Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way to your computer. Transferring Photos and Videos: Apple iPad NOTE: Please check your device packaging for compatibility with the iPad. Apple iPad Camera Connection: For models that are compatible with the iPad, photos and videos can be imported from your digital camera to your iPad by following either one of the options below: 1) Connecting your digital camera to your iPad using an iPad Camera Connector: Plug the Camera Connector into the dock connector port on your iPad, and then attach your digital camera using a USB cable (included) to the Camera Connector. NOTE: The iPad Camera Connector is not included. This item may be purchased separately. 2) Using an iPad SD Card Reader: Connect the SD Card Reader to your iPad, then insert your digital camera's SD Memory card into the slot to import photos and videos directly from your camera's SD card. NOTE: The iPad SD Card Reader is not included. This item may be purchased separately. After you make the connection, your iPad automatically opens the ‘Photos’ application. This allows you to choose which photos and videos to import and to organize them into albums. 24 Camera Maintenance The digital camera is a delicate device. Please handle your camera with care to avoid damaging it. Do not expose your camera to heat sources. Do not use you camera in wet or moist conditions. Sakar Warranty Card This warranty covers for the original consumer purchaser only and is not transferable. Products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship will be repaired at no charge for parts or labor for a period of one year from the time of purchase. What Is Not Covered By Warranty: Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification or accident. What To Do When Service Is Required: When returning your defective product (postage pre-paid) for service, your package should include: 1) Copy of original bill of sale. 2) A detailed written description of the problem. 3) Your return address and telephone number (Daytime). MAIL TO ADDRESS BELOW: Sakar US Sakar International Attention: Service Department 195 Carter Drive Edison, NJ 08817 Sakar UK/Europe Attention: Service Department 2D, Siskin Parkway East 4020 Middlemarch Business Park Coventry, CV3 4PE 25 Sakar Australia Return faulty camera to the Refund Counter at the store where purchased Technical Support For technical support issues please visit our website at www.vivitar.com. You can find manuals, software and FAQ’s at the website. Can’t find what you are looking for? E-mail us at support@vivitar.com and one of our technical support team members will answer your questions. For phone support in the US please call 1-800-592-9541, in the UK call 0800 917 4831, in Australia call 1800-006-614. If you would like to call from anywhere else, please visit www.vivitar.com for your local toll free number. Troubleshooting Q: I have taken photos and selected the “Get Images” button. I get a message that the images were successfully transferred but the photos do not appear on my computer. What do I do? First ensure that you have in fact taken photos. Press the Shutter button to take some sample photos and then try downloading them again. With test photos, if the camera's power is off before you upload them to the computer, the photos are not stored in the camera’s memory. These photos should be uploaded quickly before the camera's power is off. If the photos are saved to the SD memory card, then all the photos should appear. Q: How do I make sure I don't lose important pictures? This camera requires an SD card for normal use. If the camera's power is off, nothing will happen to the images stored on the SD memory card. We recommend always downloading your photos to your computer as soon as possible to prevent unintentional data loss. Q: I deleted images using the Vivitar Experience Image Manager. The images were also deleted from my computer. How do I recover images that I accidently deleted? All images deleted using the Vivitar Experience Image Manager are sent to your computer’s Recycle or Trash Bin and can be retrieved from there. V46_031512_TA 26
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 27 Language : en-US Tagged PDF : Yes Title : ViviCam 9112 Digital Camera Author : Administrators Creator : Microsoft® Office Word 2007 Create Date : 2012:04:04 04:32:47+03:00 Modify Date : 2012:04:04 04:32:47+03:00 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools