Vivotek PZ7112 User Manual To The 6449b416 0e8b 45c0 9fa0 54bcb8fd372b

User Manual: Vivotek PZ7112 to the manual

Open the PDF directly: View PDF .
Page Count: 126

Download
Open PDF In Browser	View PDF

10x Zoom Dual Streams PoE

PZ7111/PZ7112/PZ7121/PZ7122

IP Sur veillance

VIVOTEK

Table of Contents

Overview������������������������������������������������������������������������������������������������������������������������������������������������������3
Read Before Use�������������������������������������������������������������������������������������������������������������������������������������3
Package Contents�����������������������������������������������������������������������������������������������������������������������������������3
Physical Description��������������������������������������������������������������������������������������������������������������������������������4
Installation����������������������������������������������������������������������������������������������������������������������������������������������������7
Hardware Installation�������������������������������������������������������������������������������������������������������������������������������7
Network Deployment�������������������������������������������������������������������������������������������������������������������������������8
Software Installation������������������������������������������������������������������������������������������������������������������������������ 11
Accessing the Network Camera�����������������������������������������������������������������������������������������������������������������12
Using Web Browsers�����������������������������������������������������������������������������������������������������������������������������12
Using RTSP Players������������������������������������������������������������������������������������������������������������������������������14
Using 3GPP-compatible Mobile Devices�����������������������������������������������������������������������������������������������15
Using VIVOTEK Recording Software����������������������������������������������������������������������������������������������������16
Main Page��������������������������������������������������������������������������������������������������������������������������������������������������17
Client Settings��������������������������������������������������������������������������������������������������������������������������������������������21
Configuration����������������������������������������������������������������������������������������������������������������������������������������������23
System��������������������������������������������������������������������������������������������������������������������������������������������������24
Security�������������������������������������������������������������������������������������������������������������������������������������������������26
HTTPS���������������������������������������������������������������������������������������������������������������������������������������������������27
Network�������������������������������������������������������������������������������������������������������������������������������������������������32
Wireless LAN (PZ7112/PZ7122 only)����������������������������������������������������������������������������������������������������43
DDNS����������������������������������������������������������������������������������������������������������������������������������������������������46
Access List��������������������������������������������������������������������������������������������������������������������������������������������48
Audio and Video������������������������������������������������������������������������������������������������������������������������������������51
Motion Detection�����������������������������������������������������������������������������������������������������������������������������������57
Camera Control�������������������������������������������������������������������������������������������������������������������������������������59
Homepage Layout���������������������������������������������������������������������������������������������������������������������������������62
Application���������������������������������������������������������������������������������������������������������������������������������������������65
Recording����������������������������������������������������������������������������������������������������������������������������������������������78
System Log�������������������������������������������������������������������������������������������������������������������������������������������81
View Parameters�����������������������������������������������������������������������������������������������������������������������������������82
Maintenance������������������������������������������������������������������������������������������������������������������������������������������83
Appendix ���������������������������������������������������������������������������������������������������������������������������������������������������87
URL Commands for the Network Camera���������������������������������������������������������������������������������������������87
Technical Specifications����������������������������������������������������������������������������������������������������������������������124
Technology License Notice������������������������������������������������������������������������������������������������������������������125
Electromagnetic Compatibility (EMC)��������������������������������������������������������������������������������������������������126

2 - User's Manual

VIVOTEK

Overview
VIVOTEK’s PZ71x1(PoE)/71x2(WLAN) is a high-performance network camera featuring 10x
zoom and pan/tilt functionality. The camera is designed for indoor surveillance applications such
as retail stores, offices, and banks.
The built-in 10x motorized optical zoom module provides excellent depth of field when zoomed
in, displaying clear-cut images of near or distant objects. With 300-degree pan and 135-degree
tilt, the camera can achieve a wide range of view, giving users more comprehensive control over
the monitored site. The PZ7111/7121 is incorporated with VIVOTEK’s self-developed Bach SoC;
therefore, users can benefit from the advantages of dual-codec video and two-way audio. With
support for simultaneous dual streaming, the camera allows users to view MJPEG or MPEG-4
videos on multiple platforms such as web browsers or 3G cell phones.
VIVOTEK’s PZ7111/7121 also supports wireless and Power-over-Ethernet connection, making
installation easier and more cost-efficient. The free, standard, multi-lingual 16-channel recording
software helps users to seamlessly set up an easy-to-use IP surveillance system.

Read Before Use

The use of surveillance devices may be prohibited by law in your country. The Network Camera
is not only a high-performance web-ready camera but can also be part of a flexible surveillance
system. It is the user’s responsibility to ensure that the operation of such devices is legal and
complies with all privacy laws before installing this unit for its intended use.
It is important to first verify that all contents received are complete according to the Package
Contents listed below. Take note of the warnings in the Quick Installation Guide before the
Network Camera is installed; then carefully read and follow the instructions in the Installation
chapter to avoid damage due to faulty assembly and installation. This also ensures the product
is used properly as intended.
The Network Camera is a network device and its use should be straightforward for those
who have basic networking knowledge. It is designed for various applications including video
sharing, general security/surveillance, etc. The Configuration chapter suggests ways to best
utilize the Network Camera and ensure proper operations. For more creative and professional
developers, the URL Commands of the Network Camera section serves as a helpful reference
to customizing existing homepages or integrating with the current web server.

Package Contents

■ PZ7111/PZ7112/PZ7121/PZ7122
■ Power Adapter
■ Antenna (PZ7112/PZ7122 only)
■ Screws
■ Quick Installation Guide
■ Warranty Card
■ Software CD
■ A/V Cable
■ Ceiling Mount Brackets
User's Manual - 3

VIVOTEK

Physical Description
Front panel
Lens
Built-in Microphone

Status LED

Power/MIC

Activity

Rear panel

Antenna
(PZ7112 / PZ7122 only)

Microphone In
Ethernet 10/100
RJ45 Socket
Power Cord Socket

AV Out
AV

Recessed Reset Button

e e

General I/O
Terminal Block

External/Internal
Microphone Switch

General I/O Terminal Block
This Network Camera provides a general I/O terminal block which is used to connect external
input / output devices. The pin definitions are described below.
1: Power
2: Digital output
3: Digital input
4: Ground

Pin
1
2
3
4

4 - User's Manual

Name
Power
Digital output
Digital input
Ground

Specification
12VDC ± 5%, max. 1.5A
Max. 40VDC, max. 400mA, isolation 2kV
OPEN/Short-to-GND, isolation 2kV

Remarks
Max. rating 2A
Internal pull-up

VIVOTEK

DI/DO Diagram
Please refer to the following illustration for the connection method.
12V

PIN 1
Power+12V
PIN 2
Digital output

+12V

PIN 3
Digital input
PIN 4
Ground

Status LED
The color of LED indicates the status of the Network Camera.
Status LED Color
Blinking red
Solid green
Steady green with blinking red
Steady green and red
Steady red with blinking green
Blinking red and green

Description
Power is being supplied to the Network Camera.
The Network Camera is booting up.
The Network Camera is trying to obtain an IP address.
An IP address is successfully assigned to the Network Camera.
The Network Camera is working.
During firmware upgrade.

User's Manual - 5

VIVOTEK

Hardware Reset

AV

e e

AV

e e

The reset button is used to reset the system or restore the factory default settings. Sometimes
resetting the system can return the camera to normal operation. If the system problems remain
after rebooting, restore the factory settings and install again.
Reset: Press and release the recessed reset button with a paper clip or thin object. Wait for the
Network Camera to reboot.
Restore: Press and hold the recessed reset button until the status LED rapidly blinks red and
green simultaneously. Note that all settings will be restored to factory default.

6 - User's Manual

VIVOTEK

Installation

Hardware Installation
Follow the steps below to install the Network Camera to the ceiling:
1. Attach ceiling mount bracket A to the Network Camera and secure it with two small screws.
2. Drill three pilot holes into the ceiling; hammer the plastic anchors into the holes.
3. Fasten ceiling mount bracket B to the ceiling with three screws.
4. Slide the Network Camera into ceiling mount bracket B.
5. Secure the ceiling mount bracket A and B with a small screw.
2

4

1

A

3

5

B

NOTE
► If you want to intall the Network Camera on
the wall, please use the wall mount bracket
(optional, not included in the package).

► Keep away from interference source to
make sure performance integrate, and
avoid snow or moiré patterning.

Pow

er/M

IC
Activity

User's Manual - 7

VIVOTEK

Network Deployment
Setup the Network Camera over the Internet
This section explains how to configure the Network Camera over an Internet connection.
1. If you have external devices such as sensors and alarms, connect them to the general I/O
terminal block.
2. Connect the camera to a switch via Ethernet cable.
3. Connect the supplied power cable from the Network Camera to a power outlet.
1: Power
2: Digital ouput
3: Digital input
4: Ground

3

1
AV
e e

2
POWER

COLLISION

1

2

3

4

5

LINK
RECEIVE
PARTITION

Ethernet Switch

There are several ways to set up the Network Camera over the Internet. The first way is to set
up the Network Camera behind a router. The second way is to utilize a static IP. The third way is
to use PPPoE.
Internet connection via a router
Before setting up the Network Camera over the Internet, make sure you have a router and follow
the steps below.
1. Connect your Network Camera behind a router, the Internet environment is illustrated below.
Regarding how to obtain your IP address, please refer to Software Installation on page 11 for
details.

WAN (Wide Area Network )

Internet

Router IP address : from ISP
POWER

COLLISION

1

2

3

4

5

IP address : 192.168.0.3
Subnet mask : 255.255.255.0
Default router : 192.168.0.1

LINK
RECEIVE
PARTITION

LAN (Local Area Network)
Router IP address : 192.168.0.1
Cable or DSL Modem

IP address : 192.168.0.2
Subnet mask : 255.255.255.0
Default router : 192.168.0.1

8 - User's Manual

VIVOTEK

2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is
192.168.0.3, please forward the following ports for the Network Camera on the router.
■ HTTP port
■ RTSP port
■ RTP port for audio
■ RTCP port for audio
■ RTP port for video
■ RTCP port for video
If you have changed the port numbers on the Network page, please open the ports accordingly
on your router. For information on how to forward ports on the router, please refer to your
router’s user’s manual.
3. Find out the public IP address of your router provided by your ISP (Internet Service Provider).
Use the public IP and the secondary HTTP port to access the Network Camera from the
Internet. Please refer to Network Type on page 32 for details.
Internet connection with static IP
Choose this connection type if you are required to use a static IP for the Network Camera.
Please refer to LAN on page 32 for details.
Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to
PPPoE on page 33 for details.

User's Manual - 9

VIVOTEK

Set up the Network Camera through Power over Ethernet (PoE) (PZ71x1 only)
When using a PoE-enabled switch
The Network Camera is PoE-compliant, which allows it to be powered via a single Ethernet
cable. If your switch/router supports PoE, refer to the following illustration to connect the
Network Camera to a PoE-enabled switch/router.

power + data transmission

AV
e e

POWER

COLLISION

1

2

3

4

LINK
RECEIVE
PARTITION

5

PoE Switch

When using a non-PoE switch
If your switch/router does not support PoE, use a PoE power injector (optional) to connect
between the Network Camera and a non-PoE switch/router.

AV
e e

PoE Power Injector
(optional)

POWER

COLLISION

1

2

3

4

5

LINK
RECEIVE
PARTITION

Non-PoE Switch

10 - User's Manual

VIVOTEK

Software Installation
Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up
your Network Camera on the LAN.
1. Install IW2 from the Software Utility directory on the software CD.
Double click the IW2 shortcut on your desktop to launch the program.
2. The program will conduct an analysis of your network environment.
After your network environment is analyzed, please click Next to continue the program.

3. The program will search for all VIVOTEK network devices on the same LAN.
4. After searching, the main installer window will pop up. Click on the MAC and model name
which matches the product label on your device to connect to the Network Camera via
Internet Explorer.
Network Camera
PZ7112
0002D107C32D

RoHS
0002D107C32D

User's Manual - 11

VIVOTEK

Accessing the Network Camera
This chapter explains how to access the Network Camera through web browsers, RTSP players,
3GPP-compatible mobile devices, and VIVOTEK recording software.

Using Web Browsers
Use Installation Wizard 2 (IW2) to access to the Network Cameras installed on the LAN.
If your network environment is not the LAN, follow these steps to access the Network Camera:
1. Launch your web browser (eg. Microsoft® Internet Explorer, Mozilla Firefox, or Netscape).
2. Enter the IP address of the Network Camera in the address field. Press Enter.
3. The live video will be displayed in your web browser.
4. If this is the first time installing the VIVOTEK network camera, an information bar will pop up
as shown below. Follow the instructions to install the required plug-in on your computer.

NOTE
► For Mozilla Firefox or Netscape users, your browser will use Quick Time to stream the live
video. If you do not have Quick Time on your computer, please install it first, then launch the
web browser.

12 - User's Manual

VIVOTEK

► By default, the Network Camera is not password-protected. To prevent unauthorized access,
it is highly recommended to set a password for the Network Camera.
For more information about how to enable password protection, please refer to Security on
page 26.
► If you see a dialog box indicating that your security settings prohibit running ActiveX ®
Controls, please enable the ActiveX ® Controls for your browser.
1. Choose Tools > Internet Options > Security > Custom Level.

2. Look for Download signed ActiveX ® controls; select Enable or Prompt. Click OK.

3. Refresh your web browser, then install the Active X ® control. Follow the instructions to
complete installation.
User's Manual - 13

VIVOTEK

Using RTSP Players
To view the MPEG-4 streaming media using RTSP players, you can use one of the following
applications that support RTSP streaming.
Quick Time Player
Real Player
VLC media player
1. Launch the RTSP player.
mpegable
Player
2. Choose
File > Open
URL. A URL dialog box will pop up.
3. The address format is rtsp://:/
As most ISPs and players only allow RTSP streaming through port number 554, please set the
RTSP port to 554. For more information, please refer to RTSP Streaming on page 41.
For example:
rtsp://192.168.5.106:554/live.sdp

4. The live video will be displayed in your player.
For more information on how to configure the RTSP access name, please refer to RTSP
Streaming on page 41 for details.

Video 16:38:01 2008/01/03

14 - User's Manual

VIVOTEK

Using 3GPP-compatible Mobile Devices
To view the streaming media through 3GPP-compatible mobile devices, make sure the Network
Camera can be accessed over the Internet. For more information on how to set up the Network
Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 8.
To utilize this feature, please check the following settings on your Network Camera:
1. Because most players on 3GPP mobile phones do not support RTSP authentication, make
sure the authentication mode of RTSP streaming is set to disable.
For more information, please refer to RTSP Streaming on page 41.
2. As the the bandwidth on 3G networks is limited, larger video sizes are not available. Please
set the video and audio streaming parameters as listed below.
For more information, please refer to Audio and Video on page 51.
Video Mode
Frame size
Maximum frame rate
Intra frame period
Video quality (Constant bit rate)
Audio type (GSM-AMR)

MPEG-4
176 x 144
5 fps
1S
40kbps
12.2kbps

3. As most ISPs and players only allow RTSP streaming through port number 554, please set
the RTSP port to 554. For more information, please refer to RTSP Streaming on page 41.
4. Launch the players on 3GPP-compatible mobile devices (ex. Real Player).
5. Type the following URL commands in the player.
The address format is rtsp://:/.
For example:
rtsp://192.168.5.106:554/live.sdp

User's Manual - 15

VIVOTEK

Using VIVOTEK Recording Software
The product software CD also contains VIVOTEK’s recording software, allowing simultaneous
monitoring and video recording for multiple Network Cameras. Please install the recording
software, then launch the program to add the Network Camera to the Channel list. For detailed
information about how to use the recording software, please refer to the user’s manual of the
software or download the manual from http://www.vivotek.com.

16 - User's Manual

VIVOTEK

Main Page
This chapter explains the layout of the main page. It is composed of the following sections:
VIVOTEK INC. Logo, Host Name, Camera Control Area, PTZ Control Panel, Configuration Area,
and Live video window.
Host Name

VIVOTEK INC. Logo
Camera Control Area

PTZ Control Panel

Live View Window

Configuration Area

VIVOTEK INC. Logo
Click this logo to visit the VIVOTEK website.

Host Name

The host name can be customized to fit your needs. For more information, please refer to System on page 24.

Camera Control Area
Video Stream: This Network Camera supports MJPEG or MPEG-4 dual streams simultaneously. You can
select either one for live viewing.
Digital Output: Click to turn the digital output device on or off.

PTZ Control Panel
Left

Up
Return to Home Position
Right

Down
Zoom Out
Focus Near
Close

Zoom In
Focus Far
Open

Auto Focus
Auto Iris

Start to Auto Patrol

Start to Auto Pan
Stop Auto Panning/patrolling

User's Manual - 17

VIVOTEK

Pan: Click this button to start the auto pan. When the current position is Home or on the left side of
Home, the camera starts panning from the current position to the left-most position, then to the rightmost position, and finally backward to the original position. When the current position is on the right side
of Home, the camera starts panning from the current position to the right-most position, then to the leftmost position, and finally backward to the original position.
Stop: Click this button to stop the Auto Pan and Auto Patrol functions.
Patrol: Once the Administrator has determined the list of preset positions, click this button to command
the camera to patrol among those positions on the Patrol List. For more information, please refer to
Camera Control on page 59.
Pan /Tilt /Zoom /Focus speed: Adjust the speed of pan/ tilt/ zoom/ focus.
Pan speed
-5
-4
-3
-2
-1
0
1
2
3
4
5

Tilt speed
-5
-4
-3
-2
-1
0
1
2
3
4
5

Zoom speed
-5
-4
-3
-2
-1
0
1
2
3
4
5

Focus speed
-5
-4
-3
-2
-1
0
1
2
3
4
5

Slower

Faster

Configuration Area

Client Settings: Click this button to access the client settings page. For more information, please refer to
Client Settings on page 21.
Configuration: Click this button to access the configuration page of the Network Camera. It is suggested
that a password be applied to the Network Camera so that only the administrator can configure the
Network Camera. For more information, please refer to Configuration on page 23.
Language: Click this button to choose a language for the user interface. Language options are available
in: English, Deutsch, Español, Français, Italiano, 日本語, Português, 簡体中文, and 繁體中文.

Live Video Window
■ The following window is displayed when the video mode is set to MPEG-4:
MPEG-4 Protocol and Media Options
Video Title
Title and Time

Time
Video 10:32:05 2008/10/01

Video and Audio Control Buttons Drop-down List of Preset Positions

18 - User's Manual

VIVOTEK

Video Title: The video title can be configured. For more information, please refer to Video Settings on
page 51.
MPEG-4 Protocol and Media Options: The transmission protocol and media options for MPEG-4 video
streaming. For further configuration, please refer to Client Settings on page 21.
Time: Display the current time. For further configuration, please refer to Video Settings on page 51.
Title and Time: The video title and time can be stamped on the streaming video. For further configuration,
please refer to Video Settings on page 51.
Video and Audio Control Buttons: Depending on the Network Camera model and Network Camera
configuration, some buttons may not be available.
Snapshot: Click this button to capture and save still images. The captured images will be displayed
in a pop-up window. Right-click the image and choose Save Picture As to save it in JPEG (*.jpg) or BMP
(*.bmp) format.
Digital Zoom: Click and uncheck “Disable digital zoom” to enable the zoom operation. The navigation
screen indicates the part of the image being magnified. To control the zoom level, drag the slider bar. To
move to a different area you want to magnify, drag the navigation screen image.

Pause: Pause the transmission of the streaming media. The button becomes the
after clicking the Pause button.
Stop: Stop the transmission of the streaming media. Click the
transmission.

Resume button

Resume button to continue

Start MP4 Recording: Click this button to record video clips in MP4 file format. Press the
Stop MP4 Recording button to end recording. When you exit the web browser, video recording stops
accordingly. To specify the storage destination and the file name, please refer to MP4 Saving Options on
page 22 for details.
Volume: If the
local computer.

Mute function is not activated, move the slider bar to adjust the volume on the

Mute: Turn off the volume on the local computer. The button becomes the
clicking the Mute button.

Audio On button after

Talk: Click this button to talk to people around the Network Camera. Audio will project from
again to end talking
the external speaker connected to the Network Camera. Click this button
transmission.
Mic Volume: When the
Mute function is not activated, move the slider bar to adjust the
microphone volume on the local computer.
Mute: Turn off the
Mic volume at local computer. The button becomes the
after clicking the Mute button.

Mic On button

Full Screen: Click this button to switch to full screen mode. Press the “Esc” key to switch back to normal
mode.
User's Manual - 19

VIVOTEK

Go to: Once the Administrator has determined the list of preset positions, you can aim the camera using
this command. For more information, please refer to Camera Control on page 59.

■ The following window is displayed when the video mode is set to MJPEG:
Video Title
Title and Time

Time
Video 11:13:07 2008/10/01

Video Control Buttons

Drop-down List of Preset Positions

Video Title: The video title can be configured. For more information, please refer to Video Settings on
page 51.
Time: Display the current time. For more information, please refer to Video Settings on page 51.
Title and Time: The video title and time can be stamped on the streaming video. For more information,
please refer to Video Settings on page 51.
Video and Audio Control Buttons: Depending on the Network Camera model and Network Camera
configuration, some buttons may not be available.
Snapshot: Click this button to capture and save still images. The captured images will be displayed
in a pop-up window. Right-click the image and choose Save Picture As to save it in JPEG (*.jpg) or BMP
(*.bmp) format.
Digital Zoom: Click and uncheck “Disable digital zoom” to enable the zoom operation. The navigation
screen indicates the part of the image being magnified. To control the zoom level, drag the slider bar. To
move to a different area you want to magnify, drag the navigation screen image.

Start MP4 Recording: Click this button to record video clips in MP4 file format. Press the
Stop MP4 recording button to end recording. When you exit the web browser, video recording stops
accordingly. To specify the storage destination and file name, please refer to MP4 Saving Options on
page 22 for details.
Full Screen: Click this button to switch to full screen mode. Press the “Esc” key to switch back to normal
mode.
Go to: Once the Administrator has determined the list of preset positions; you can aim the camera using
this command. For more information, please refer to Camera Control on page 59.

20 - User's Manual

VIVOTEK

Client Settings
This chapter explains how to select the stream transmission mode and saving options on the
local computer. When finished with the settings on this page, click Save on the bottom of the
page to enable the settings.
MPEG-4 Media Options

Select whether to stream video or audio data or both. This is enabled only when the video mode is set to
MPEG-4.

MPEG-4 Protocol Options

Depending on your network environment, there are four transmission modes for MPEG-4 streaming:
UDP unicast: This protocol allows for better real-time audio and video streams. However, network
packets may be lost due to network burst traffic and images may be broken. Activate the UDP connection
when occasions require time-sensitive responses and the video quality is less important. Note that each
unicast client connecting to the server takes up additional bandwidth and the Network Camera allows up
to ten simultaneous accesses.
UDP multicast: This protocol allows multicast-enabled routers to forward network packets to all clients
requesting streaming media. This helps to reduce the network transmission load of the Network Camera
while serving multiple clients at the same time. Note that to utilize this feature, the Network Camera must
be configured to enable multicast streaming at the same time. For more information, please refer to
RTSP Streaming on page 41.
TCP: This protocol guarantees the complete delivery of streaming data and thus provides better video
quality. However, the real-time effect is not as good as that of the UDP protocol.
HTTP: This protocol allows for the same transmission quality as the TCP protocol without needing to
open specific ports for streaming under some network environments. Users inside a firewall can utilize
this protocol to allow streaming data through.

User's Manual - 21

VIVOTEK

MP4 Saving Options

Users can record live video as they are watching by clicking
Here, you can specify the storage destination and file name.

Start MP4 Recording on the main page.

Folder: Specify the storage destination for the recorded video files.
File name prefix: Enter the text that will be appended to the front of the video file name.
Add date and time suffix to the file name: Select this option to append the date and time to the end of the
file name.
CLIP_20080108-180853

File name prefix Date and time suffix
The format is: YYYYMMDD_HHMMSS

22 - User's Manual

VIVOTEK

Configuration
Click Configuration on the main page to enter the camera setting pages. Note that only
Administrators can access the configuration page.
VIVOTEK offers an easy-to-use user interface that helps you set up your network camera with
minimal effort. To simplify the setting procedure, two types of user interfaces are available:
Advanced Mode for professional users and Basic Mode for entry-level users. Some advanced
functions (HTTPS/ Access list/ Homepage layout/ Application/ Recording/ System log/ View
parameters) are not displayed in Basic Mode.
If you want to set up advanced functions, please click [Advanced Mode] on the bottom of the
configuration list to quickly switch to Advanced Mode.
In order to simplify the user interface, the detailed information will be hidden unless you click on
the function item. When you click on the first sub-item, the detailed information for the first subitem will be displayed; when you click on the second sub-item, the detailed information for the
second sub-item will be displayed and that of the first sub-item will be hidden.
The following is the interface of the Basic Mode and the Advanced Mode:
Basic Mode

Configuration list

Click to switch to Advanced mode
Firmware Version

User's Manual - 23

VIVOTEK

Advanced Mode

Configuration list

Click to switch to Basic mode
Firmware Version

Each function on the configuration list will be explained in the following sections. Those functions that are
displayed only in Advanced Mode are marked with Advanced Mode . If you want to set up the advanced
functions, please click [Advanced Mode] on the bottom of the configuration list to quickly switch over.

System
This section explains how to configure the basic settings for the Network Camera, including
System, System Time, and DI/DO. When completed with the settings on this page, click Save at
the bottom of the page to enable the settings.
System

Host name: Enter the desired name for the Network Camera. The text will be displayed at the top of the
main page.
Turn off the LED indicators: If you do not want to let others know that the network camera is in operation,
you can select this option to turn off the LED indicators.
24 - User's Manual

VIVOTEK

System Time

Keep current date and time: Select this option to preserve the current date and time of the Network
Camera. The Network Camera’s internal real-time clock maintains the date and time even when the
system power is turned off.
Sync with computer time: Select this option to synchronize the date and time of the Network Camera with
the local computer. The read-only date and time of the PC is displayed when updated.
Manual: The administrator can enter the date and time manually. Note that the date and time format is
[yyyy/mm/dd] and [hh:mm:ss].
Automatic: The Network Time Protocol is a protocol which synchronizes computer clocks by periodically
querying an NTP Server.
NTP server: Assign the IP address or domain name of the time-server. Leaving the text box blank
connects the Network Camera to the default time servers.
Update interval: Select to update the time using the NTP server on an hourly, daily, weekly, or monthly
basis.
Time zone Advanced Mode : Select the appropriate time zone from the list. If you want to upload
Daylight Savings Time rules on the Maintenance page, please refer to Upload / Export Daylight Saving
Time Configuration File on page 84 for details.

DI and DO

Digital input: Select High or Low to define the normal status for the digital input. The Network Camera
will report the current status.
Digital output: Select Grounded or Open to define normal status for the digital output. The Network
Camera will show whether the trigger is activated or not.

User's Manual - 25

VIVOTEK

Security
This section explains how to enable password protection and create multiple accounts.
Root Password

The administrator account name is “root”, which is permanent and can not be deleted. If you want to add
more accounts in the Manage User column, please set a password for the “root” account first.
1. Type the password in both text boxes, then click Save to enable password protection.
2. A window will be prompted for authentication; type the correct user’s name and password in their
respective fields to access the Network Camera.

Manage Privilege Advanced Mode

Digital Output & PTZ control: You can modify the manage privilege of operators or viewers. Check or
uncheck the item, then click Save to enable the settings. If you give Viewers the privilege, Operators will
also have the ability to control the Network Camera through the main page. (Please refer to Main Page
on page 17.)
Allow anonymous viewing: If you check this item, any client can access the live stream without entering a
User ID and Password.

Manage User

Administrators can add up to 20 user accounts.
1. Input the new user’s name and password.
2. Select the privilege level for the new user account. Click Add to enable the setting.
Access rights are sorted by user privilege (Administrator, Operator, and Viewer). Only administrators
can access the Configuration page. Operators cannot access the Configuration page but can use the
URL Commands to get and set the value of parameters. For more information, please refer to URL
Commands for the Network Camera on page 87. Viewers access only the main page for live viewing.
Here you also can change a user’s access rights or delete user accounts.
1. Select an existing account to modify.
2. Make necessary changes and click Update or Delete to enable the setting.
26 - User's Manual

VIVOTEK

HTTPS (Hypertext Transfer Protocol over SSL)

Advanced Mode

This section explains how to enable authentication and encrypted communication over SSL
(Secure Socket Layer). It helps protect streaming data transmission over the Internet on higher
security level.
Enable HTTPS

Check this item to enable HTTPS communication, then select a connection option: "HTTP & HTTPS"
or "HTTPS only". Note that you have to create and install a certificate first in the second column before
clicking the Save button.

Create and Install Certificate Method
Before using HTTPS for communication with the Network Camera, a Certificate must be created first.
There are three ways to create and install a certificate:
Create self-signed certificate automatically
1. Select this option.
2. In the first column, check Enable HTTPS secure connection, then select a connection option: “HTTP
& HTTPS” or “HTTPS only”.
3. Click Save to generate a certificate.

User's Manual - 27

VIVOTEK

4. The Certificate Information will automatically de displayed in the third column as shown below. You can
click Property to view detailed information about the certificate.

5. Click Home to return to the main page. Change the address from “http://” to “https://“ in the address
bar and press Enter on your keyboard. Some Security Alert dialogs will pop up. Click OK or Yes to
enable HTTPS.

https://

https://192.168.5.151/index.html

28 - User's Manual

VIVOTEK

Create self-signed certificate manually
1. Select this option.
2. Click Create to open a Create Certificate page, then click Save to generate the certificate.

3. The Certificate Information will automatically be displayed in the third column as shown below. You
can click Property to see detailed information about the certificate.

Create certificate and install : Select this option if you want to create an official certificate issued by
a CA (Certificate Authority).
1. Select this option.
2. Click Create to open the Create Certificate page, then click Save to generate the certificate.

User's Manual - 29

VIVOTEK

3. If you see the following Information bar, click OK and click on the Information bar on the top of the
page to allow pop-ups.

4. The pop-up window shows an example of a certificate request.

30 - User's Manual

VIVOTEK

5. Look for a trusted certificate authority that issues digital certificates. Enroll the Network Camera. Wait
for the certificate authority to issue a SSL certificate; click Browse... to search for the issued certificate,
then click Upload in the second column.

NOTE
► How do I cancel the HTTPS settings?
1. Uncheck Enable HTTPS secure connection in the first column and click Save; a warning dialog will
pop up.
2. Click OK to disable HTTPS.

3. The webpage will redirect to a non-HTTPS page automatically.
► If you want to create and install other certificates, please remove the existing one. To remove the
signed certificate, uncheck Enable HTTPS secure connection in the first column and click Save.
Then click Remove to erase the certificate.

User's Manual - 31

VIVOTEK

Network
This section explains how to configure a wired network connection for the Network Camera.
Network Type

LAN

Select this option when the Network Camera is deployed on a local area network (LAN) and is intended
to be accessed by local computers. The default setting for the Network Type is LAN. Rememer to click
Save when you complete the Network setting.
Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by
the DHCP server each time the camera is connected to the LAN.
Use fixed IP address: Select this option to manually assign a static IP address to the Network Camera.

1. You can make use of VIVOTEK Installation Wizard 2 on the software CD to easily set up the Network
Camera on LAN. Please refer to Software Installation on page 11 for details.
2. Enter the static IP, Subnet mask, Default router, and Primary DNS provided by your ISP.
Enable UPnP presentation: Select this option to enable UPnPTM presentation for your Network Camera
so that whenever a Network Camera is presented to the LAN, shortcuts of connected Network Cameras
will be listed in My Network Places. You can click the shortcut to link to the web browser. Currently,
UPnPTM is supported by Windows XP or later. Note that to utilize this feature, please make sure the
UPnPTM component is installed on your computer.
32 - User's Manual

VIVOTEK

Network Camera (192.168.5.151)

Enable UPnP port forwarding: To access the Network Camera from the Internet, select this option to
allow the Network Camera to open ports on the router automatically so that video streams can be sent
out from a LAN. To utilize of this feature, make sure that your router supports UPnPTM and it is activated.

PPPoE (Point-to-point over Ethernet)

Select this option to configure your Network Camera to make it accessible from anywhere as long as
there is an Internet connection. Note that to utilize this feature, it requires an account provided by your
ISP.
Follow the steps below to acquire your Network Camera’s public IP address.
1. Set up the Network Camera on the LAN.
2. Go to Home > Configuration > Application > Server Settings (please refer to Server Settings on page
71) to add a new email or FTP server.
3. Go to Configuration > Application > Media Settings (please refer to Media Settings on page 74). Select
System log so that you will receive the system log in TXT file format which contains the Network
Camera’s public IP address in your email or on the FTP server.
4. Go to Configuration > Network > Network Type. Select PPPoE and enter the user name and password
provided by your ISP. Click Save to enable the setting.

5. The Network Camera will reboot.
6. Disconnect the power to the Network Camera; remove it from the LAN environment.

NOTE
► If the default ports are already used by other devices connected to the same router, the Network
Camera will select other ports for the Network Camera.
► If UPnP TM is not supported by your router, you will see the following message:
Error: Router does not support UPnP port forwarding.

User's Manual - 33

VIVOTEK

► Steps to enable the UPnP TM user interface on your computer:
Note that you must log on to the computer as a system administrator to install the UPnP TM
components.
1. Go to Start, click Control Panel, then click Add or Remove Programs.

2. In the Add or Remove Programs dialog box, click Add/Remove Windows Components.

3. In the Windows Components Wizard dialog box, select Networking Services and click Details.

34 - User's Manual

VIVOTEK

4. In the Networking Services dialog box, select Universal Plug and Play and click OK.

5. Click Next in the following window.

6. Click Finish. UPnP TM is enabled.
► How does UPnP TM work?
UPnP TM networking technology provides automatic IP configuration and dynamic discovery of devices
added to a network. Services and capabilities offered by networked devices, such as printing and file
sharing, are available among each other without the need for cumbersome network configuration. In
the case of Network Cameras, you will see Network Camera shortcuts under My Network Places.
► Enabling UPnP port forwarding allows the Network Camera to open a secondary HTTP port on the
router-not HTTP port-meaning that you have to add the secondary HTTP port number to the Network
Camera’s public address in order to access the Network Camera from the Internet. For example,
when the HTTP port is set to 80 and the secondary HTTP port is set to 8080, refer to the list below for
the Network Camera’s IP address.
From the Internet
http://203.67.124.123:8080

In LAN
http://192.168.4.160 or
http://192.168.4.160:8080

► If the PPPoE settings are incorrectly configured or the Internet access is not working, restore the
Network Camera to factory default; please refer to Restore on page 83 for details. After the Network
Camera is reset to factory default, it will be accessible on the LAN.

User's Manual - 35

VIVOTEK

Enable IPv6

Select this option and click Save to enable IPv6 settings.
Please note that this only works if your network environment and hardware equipment support IPv6. The
browser should be Microsoft® Internet Explorer 6.5, Mozilla Firefox 3.0 or above.

When IPv6 is enabled, by default, the network camera will listen to router advertisements and be
assigned with a link-local IPv6 address accordingly.
IPv6 Information: Click this button to obtain the IPv6 information as shown below.

If your IPv6 settings are successful, the IPv6 address list will listed in the pop-up window. The IPv6
address will be displayed as follows:

Refers to Ethernet

Link-global IPv6 address/network mask
Link-local IPv6 address/network mask

36 - User's Manual

VIVOTEK

Please follow the steps below to link to an IPv6 address:
1. Open your web browser.
2. Enter the link-global or link-local IPv6 address in the address bar of your web browser.
3. The format should be:
http://[2001:0c08:2500:0002:0202:d1ff:fe04:65f4]/
IPv6 address

4. Press Enter on the keyboard or click Refresh button to refresh the webpage.
For example:

NOTE
► If you have a Secondary HTTP port (the default value is 8080), you can also link to the webpage in
the following address format: (Please refer to HTTP on page 38 for detailed information.)
http://[2001:0c08:2500:0002:0202:d1ff:fe04:65f4]/:8080
IPv6 address

Secondary HTTP port

► If you choose PPPoE as the Network Type, the [PPP0 address] will show up in the IPv6 information
column as below.

Manually setup the IP address: Select this option to manually set up IPv6 settings if your network
environment does not have DHCPv6 server and router advertisements-enabled routers.
If you check this item, the following blanks will be displayed for you to enter the corresponding
information:

User's Manual - 37

VIVOTEK

HTTP Advanced Mode
To utilize HTTP authentication, make sure that your have set a password for the Network Camera first;
please refer to Security on page 26 for details.

Authentication: Depending on your network security requirements, the Network Camera provides two
types of security settings for an HTTP transaction: basic and digest.
If basic authentication is selected, the password is sent in plain text format and there can be potential
risks of being intercepted. If digest authentication is selected, user credentials are encrypted using MD5
algorithm and thus provide better protection against unauthorized accesses.
HTTP port / Secondary HTTP port: By default, the HTTP port is set to 80 and the secondary HTTP port is
set to 8080. They can also be assigned to another port number between 1025 and 65535. If the ports are
incorrectly assigned, the following warning messages will be displayed:

To access the Network Camera on the LAN, both the HTTP port and secondary HTTP port can be used
to access the Network Camera. For example, when the HTTP port is set to 80 and the secondary HTTP
port is set to 8080, refer to the list below for the Network Camera’s IP address.
In LAN
http://192.168.4.160 or
http://192.168.4.160:8080

Access name for stream 1 / Access name for stream 2: The access name is used to differentiate the
streaming source.
When using Mozilla Firefox or Netscape to access the Network Camera and the video mode is set to
JPEG, users will receive video comprised of continuous JPEG images. This technology, known as “server
push”, allows the Network Camera to feed live pictures to Mozilla Firefox and Netscape.

38 - User's Manual

VIVOTEK

URL command -- http://:/
For example, when the Access name for stream 2 is set to video2.mjpg:
1. Launch Mozilla Firefox or Netscape.
2. Type the URL command in the address bar. Press Enter.
3. The JPEG images will be displayed in your web browser.

http://192.168.5.151/video2.mjpg

NOTE
► Microsoft ® Internet Explorer does not support server push technology; therefore, using http://:/ will fail to access the Network Camera.

HTTPS

By default, the HTTPS port is set to 443. It can also be assigned to another port number between 1025
and 65535.

Two way audio

By default, the two way audio port is set to 5060. Also, it can also be assigned to another port number
between 1025 and 65535.
The Network Camera supports two way audio communication so that operators can transmit and receive
audio simultaneously. By using the Network Camera’s built-in or external microphone and an external
speaker, you can communicate with people around the Network Camera.

User's Manual - 39

VIVOTEK

Note that as JPEG only transmits a series of JPEG images to the client, to enable the two-way audio
function, make sure the video mode is set to “MPEG-4” on the Audio and Video Settings page and the
media option is set to “Video and Audio” on the Client Settings page. Please refer to Client Settings on
page 21 and Audio and Video Settings on page 51.

Audio transmitted to operators

America

Audio transmitted from operators

Taiwan

Audio is being transmitted to the Network Camera

Talk Button Mic Volume

Mute

Click
to enable audio transmission to the Network Camera; click
to turn off the audio. To stop talking, click
again.
microphone; click

to adjust the volume of

FTP

The FTP server allows the user to save recorded video clips. You can utilize VIVOTEK Installation Wizard
2 to upgrade the firmware via FTP server. By default, the FTP port is set to 21. It also can be assigned to
another port number between 1025 and 65535.

40 - User's Manual

VIVOTEK

RTSP Streaming

To utilize RTSP streaming authentication, make sure that you have set a password for the Network
Camera first; please refer to Security on page 26 for details.

Authentication: Depending on your network security requirements, the Network Camera provides three
types of security settings for streaming via RTSP protocol: disable, basic, and digest.
If basic authentication is selected, the password is sent in plain text format, but there can be potential
risks of it being intercepted. If digest authentication is selected, user credentials are encrypted using
MD5 algorithm, thus providing better protection against unauthorized access.
The availability of the RTSP streaming for the three authentication modes is listed in the following table:
Disable
Basic
Digest

Quick Time player

Real Player

O
O
O

O
O
X

Access name for stream 1 / Access name for stream 2: This Network camera supports dual streams
simultaneously. The access name is used to differentiate the streaming source.
If you want to use an RTSP player to access the Network Camera, you have to set the video mode to
MPEG-4 and use the following RTSP URL command to request transmission of the streaming data.
rtsp://:/
For example, when the access name for stream 1 is set to live.sdp:
1. Launch an RTSP player.
2. Choose File > Open URL. A URL dialog box will pop up.
3. Type the URL command in the text box. For example:
rtsp://192.168.5.106:554/live.sdp
4. The live video will be displayed in your player as shown
below.
Video 16:38:01 2008/01/03

User's Manual - 41

VIVOTEK

RTSP port /RTP port for video, audio/ RTCP port for video, audio
■ RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. By default, the port
number is set to 554.
■ The RTP (Real-time Transport Protocol) is used to deliver video and audio data to the clients. By
default, the RTP port for video is set to 5556 and the RTP port for audio is set to 5558.
■ The RTCP (Real-time Transport Control Protocol) allows the Network Camera to transmit the data by
monitoring Internet traffic volume. By default, the RTCP port for video is set to 5557 and the RTCP port
for audio is set to 5559.
The ports can be changed to values between 1025 and 65535. The RTP port must be an even number
and the RTCP port is the RTP port number plus one, and thus is always odd. When the RTP port
changes, the RTCP port will change accordingly.
If the RTP ports are incorrectly assigned, the following warning message will be displayed:

Multicast settings for stream 1 / Multicast settings for stream 2: Click the items to display the detailed
configuration information. Select the Always multicast option to enable multicast for stream 1 or stream 2.

Unicast video transmission delivers a stream through point-to-point transmission; multicast, on the other
hand, sends a stream to the multicast group address and allows multiple clients to acquire the stream at
the same time by requesting a copy from the multicast group address. Therefore, enabling multicast can
effectively save Internet bandwith.
The ports can be changed to values between 1025 and 65535. The multicast RTP port must be an even
number and the multicast RTCP port number is the multicast RTP port number plus one, and is thus
always odd. When the multicast RTP port changes, the multicast RTCP port will change accordingly.
If the multicast RTP video ports are incorrectly assigned, the following warning message will be
displayed:

Multicast TTL [1~255]: The multicast TTL (Time To Live) is the value that tells the router the range a
packet can be forwarded.
42 - User's Manual

VIVOTEK

Wireless LAN (PZ7112/PZ7122 only)

SSID (Service Set Identifier): This is the name that identifies a wireless network. Access Points and
wireless clients attempting to connect to a specific WLAN (Wireless Local Area Network) must use the
same SSID. The default setting is “default”. Note: The maximum length for an SSID is 32 single-byte
characters and cannot consist of “, <, >, or blank spaces.
Wireless mode: Click on the pull-down menu to select from the following options:
■ Infrastructure: Connect the Network Camera to the WLAN via an Access Point. (default setting)
■ Ad-Hoc: Connect the Network Camera directly to a host equipped with a wireless adapter in a peer-topeer environment.

Channel: While in infrastructure mode, the channel is selected automatically to match the channel setting
of the selected Access Point. In Ad-Hoc mode, the channel must be manually set to the same channel for
each wireless adapter. The default channel setting depends on the installed region.
TX rate: This field is for selecting the maximum transmission rate over the network. The default setting is
“auto”, that is, the Network Camera will try to connect to other wireless devices with highest transmission
rate.
Security: Select the data encrypt method. There are four types, including: none, WEP, WPA-PSK, and
WPA2-PSK.

1. None: No data encryption.

User's Manual - 43

VIVOTEK

2. WEP (Wired Equivalent Privacy): This allows communication only with other devices with identical
WEP settings.

■ Authentication Mode: Choose one of the following modes. The default setting is “Open”.
Open – Communicates the key across the network.
Shared – Allows communication only with other devices with identical WEP settings.

■ Key length: The administrator can set the key length to 64 or 128 bits.
The default setting is “64 bits”.

■ Key format: Hexadecimal or ASCII. The fault setting is “HEX”.

HEX digits consist of the numbers 0~9 and the letters A-F.
ASCII is a code for representing English letters as numbers from 0-127 except “, <, > , and the space
character which are reserved.

■ Network Key: Enter a key in either hexadecimal or ASCII format.

You can select different key lengths, the acceptable input lengths are as follows:
64-bit key length: 10 Hex digits or 5 characters.
128-bit key length: 26 Hex digits or 13 characters.

NOTE
► When 22(“), 3C(<), or 3E(>) are input as network keys, the key format cannot be changed to ASCII
format.

44 - User's Manual

VIVOTEK

3. WPA-PSK: Use WPA (Wi-Fi Protected Access) pre-shared key.

More secure than WEP, the Wi-Fi Alliance developed WPA (Wi-Fi Protected Access) in 2003 to
address WEP’s weaknesses. Improvements included TKIP, which changes the encryption key for each
data transmission.

■ Algorithm: Choose one of the following algorithms for WPA-PSK and WPA2-PSK modes.

TKIP (Temporal Key Integrity Protocol): A security protocol used in IEEE 802.11 wireless networks.
TKIP is a “wrapper” that goes around the existing WEP encryption. TKIP is comprised of the same
encryption engine and RC4 algorithm defined for WEP; however, the key used for encryption in TKIP
is 128 bits long. This solves the first problem of WEP: a short key length. (From Wikipedia)
AES (Advanced Encryption Standard): In cryptography, the Advanced Encryption Standard (AES), also
known as Rijndael, is a block cipher adopted as an encryption standard by the U.S. government.
As of 2006, AES is one of the most popular algorithms used in symmetric key cryptography. (From
Wikipedia)

■ Pre-shared Key: Enter a key in ASCII format. The length of the key can be between 8 to 63 characters.
4. WPA2-PSK: Use WPA2 pre-shared key.

This advanced protocol, certified through Wi-Fi Alliance’s WPA2 program, implements the mandatory
elements of 802.11i. In particular, it introduces a new AES-based algorithm, CCMP, that is considered
fully secure. From March 13, 2006, WPA2 certification is mandatory for all new devices wishing to be
certified by the Wi-Fi Alliance as “Wi-Fi CERTIFIED.” (From Wikipedia)

NOTE
► After wireless configurations are completed, click Save and the camera will reboot. Wait for the live
image ito be reloaded to your browser. For VIVOTEK 7000-series cameras, you have to unplug the
power and Ethernet cables from the camera; then re-plug the power cable to the camera. The camera
will switch to wireless mode.
► Some invalid settings may cause the system to fail to respond. Change the configuration settings only
if necessary and consult with your network supervisor or experienced users for correct settings. Once
the system has lost contact, please refer to Maintenance on page 83 for reset and restore procedures.

User's Manual - 45

VIVOTEK

DDNS
This section explains how to configure the dynamic domain name service for the Network
Camera. DDNS is a service that allows your Network Camera, especially when assigned with a
dynamic IP address, to have a fixed host and domain name.
DDNS: Dynamic domain name service

Enable DDNS: Select this option to enable the DDNS setting.
Provider: Select a DDNS provider from the provider drop-down list.
VIVOTEK offers Safe100.net, a free dynamic domain name service, to VIVOTEK customers. It is
recommended that you register Safe100.net to access VIVOTEK’s Network Cameras from the Internet.
Additionally, we offer other DDNS providers, such as Dyndns.org(Dynamic), Dyndns.org(Custom), TZO.
com, DHS.org, CustomSafe100, dyn-interfree.it.
Note that before utilizing this function, please apply for a dynamic domain account first.

■ Safe100.net

1. In the DDNS column, select Safe100.net from the drop-down list. Click I accept after reviewing the
terms of the Service Agreement.
2. In the Register column, fill in the Host name (xxxx.safe100.net), Email, Key, and Confirm Key, then
click Register. After a host name has been successfully created, a success message will be displayed
in the DDNS Registration Result column.

[Register] Successfully Your account information has
been mailed to registered e-mail address

3. Click Copy and all the registered information will automatically be uploaded to the corresponding fields
in the DDNS column at the top of the page as seen in the picture.
46 - User's Manual

VIVOTEK

[Register] Successfully Your account information has
been mailed to registered e-mail address

4. Select Enable DDNS and click Save to enable the setting.

■ CustomSafe100

VIVOTEK offers documents to establish a CustomSafe100 DDNS server for distributors and system
integrators. You can use CustomSafe100 to register a dynamic domain name if your distributor or system
integrators offer such services.
1. In the DDNS column, select CustomSafe100 from the drop-down list.
2. In the Register column, fill in the Host name, Email, Key, and Confirm Key; then click Register. After a
host name has been successfully created, you will see a success message in the DDNS Registration
Result column.
3. Click Copy and all for the registered information will be uploaded to the corresponding fields in the
DDNS column.
4. Select Enable DDNS and click Save to enable the setting.
Forget key: Click this button if you have forgotten the key to Safe100.net or CustomSafe100. Your
account information will be sent to your email address.

Refer to the following links to apply a dynamic domain account when selecting other DDNS
providers:

■ Dyndns.org(Dynamic) / Dyndns.org(Custom): visit http://www.dyndns.com/
■ TZO.com: visit http://www.tzo.com/
■ DHS.org: visit http://www.dhs.org/
■ dyn-interfree.it: visit http://dyn-interfree.it/

User's Manual - 47

VIVOTEK

Access List

Advanced Mode

This section explains how to control access permission by verifying the client PC’s IP address.
General Settings

Maximum number of concurrent streaming connection(s) limited to: Simultaneous live viewing for 1~10
clients (including stream 1 and stream 2). The default value is 10. If you modify the value and click Save,
all current connections will be disconnected and automatically attempt to re-link (IE Explore or Quick
Time Player).
View Information: Click this button to display the connection status window showing a list of the current
connections. For example:
Connection status

IP address

Elapsed time

192.168.1.147

12:20:34

root

61.22.15.3

00:10:09

anonymous

192.168.3.25

45:00:34

greg

Refresh

Add to Deny List

User ID

Disconnect

■ IP address: Current connections to the Network Camera.
■ Elapsed time: How much time the client has been at the webpage.
■ User ID: If the administrator has set a password for the webpage, the clients have to enter a user name
and password to access the live video. The user name will be displayed in the User ID column. If the
administrator allows clients to link to the webpage without a user name and password, the User ID
column will be empty.
There are some situations which allow clients access to the live video without a user name and
password:
1. The administrator does not set up a root password. For more information about how to set up a root
password and manage user accounts, please refer to Security on page 26.
2. The administrator has set up a root password, but set RTSP Authentication to “disable“. For more
information about RTSP Authentication, please refer to RTSP Streaming on page 41.
3. The administrator has set up a root password, but allows anonymous viewing. For more information
about Allow Anonymous Viewing, please refer to Security on page 26.

48 - User's Manual

VIVOTEK

■ Refresh: Click this button to refresh all current connections.
■ Add to deny list: You can select entries from the Connection Status list and add them to the Deny List
to deny access. Please note that those checked connections will only be disconnected temporarily
and will automatically try to re-link again (IE Explore or Quick Time Player). If you want to enable the
denied list, please check Enable access list filtering and click Save in the first column.
■ Disconnect: If you want to break off the current connections, please select them and click this
button. Please note that those checked connections will only be disconnected temporarily and will
automatically try to re-link again (IE Explore or Quick Time Player).
Enable access list filtering: Check this item and click Save if you want to enable the access list filtering
function.

Filter

There are two lists for permission control: Allowed list and Denied list. Only those clients whose IP
addresses are on the Allowed list and not on the Denied list can access the Network Camera. Please
note that the IPv6 access list column will not be displayed unless you enable IPv6 on the Network page.
For more information about IPv6 Settings, please refer to page 36 for detailed information.

■ Add a rule to Allowed/Denied list: Click Add to add a rule to Allowed/Denied list.
There are three types of rules for user to set up:
Single: This rule allows the user to add an IP address to the Allowed/Denied list.
For example:

User's Manual - 49

VIVOTEK

Network: This rule allows the user to assign a network address and corresponding subnet mask to the
Allow/Deny List.
For example:

IP address 192.168.2.x will be bolcked.
Range: This rule allows the user to assign a range of IP addresses to the Allow/Deny List. This rule is
only applied to IPv4.
For example:

■ Delete Allowed/Denied list:
In the Delete Allowed List or Delete Denied List column, make a selection and click Delete.

NOTE
► For example, when the range of IP addresses in the allowed list is set from 1.1.1.0 to 192.255.255.255
and the range in the denied list is set from 1.1.1.0 to 170.255.255.255, only users’ IP located between
171.0.0.0 and 192.255.255.255 can access the Network Camera.

Allowed
List

Administrator IP address

Denied
List

Always allow the IP address to access this device: You can check this item and add the Administrator’s
IP address in this field to make sure the Administrator can always connect to the device.

50 - User's Manual

VIVOTEK

Audio and Video
This section explains how to cofigure the audio and video settings of the Network Camera. It is
composed of the following two columns: Video Settings and Audio Settings.
Video Settings

Video title: Enter a name that will be displayed on the title bar of the live video.
Video title
Title and Time

10:32:05 2008/10/01

Color: Select to display color or black/white video streams.
Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image
flickering associated with fluorescent lights. Note that after the power line frequency is changed, you
must disconnect and reconnect the power cord of the Network Camera in order for the new setting to
take effect.
Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect the display
of the live video. Select both options if the Network Camera is installed upside-down (ex. on the ceiling)
to correct the image orientation.
Overlay title and time stamp on video: Select this option to place the video title and time on the video
streams.

User's Manual - 51

VIVOTEK

Note that when the frame size is set to 176 x 144 as shown in the picture below, only the time will be
stamped on the video streams.

12:07:35 2009/04/24

Enable time shift caching stream Advanced Mode : Check this item to enable the time shift cache
stream on the Network Camera, which will stores video in the camera’s embedded memory for a period
of time depending on the cache memory of each Network Camera. This function can work seamlessly
with VIVOTEK’s ST7501 recording software. When an event occurs, the recording software can request
time shift cache stream from the camera, which allows the user to get an earlier video data.

Image Settings Advanced Mode
Click Image Settings to open the Image Settings page. On this page, you can tune the Brightness,
Saturation, Contrast, and Sharpness for the video.

Image Adjustment
■ Brightness: Adjust the image brightness level, which ranges from -5 to +5. The default value is set to 0.
52 - User's Manual

VIVOTEK

■ Saturation: Adjust the image saturation level, which ranges from -5 to +5. The default value is set to 0.
■ Contrast: Adjust the image contrast level, which ranges from -5 to +5. The default value is set to 0.
■ Sharpness: Adjust the image sharpness level, which ranges from -3 to +3. The default value is set to +3.
You can click Preview to fine-tune the image, or click Restore to recall the original settings without
incorporating the changes. When completed with the settings on this page, click Save to enable the
setting and click Close to exit the page.

CCD Adjustment Advanced Mode
Click CCD settings to open the CCD Adjustment page. On this page, you can set the Auto electronic
shutter (AES), Auto tracking white balance, White balance control, Low lux mode, and BLC settings.

Auto electronic shutter (AES): The default iris setting of the CCD is fixed mode, and the AES option
will be 1/50 (1/60). There are several options for AES: 1/50 (1/60), 1/100 (1/120), 1/250, 1/500, 1/1000,
1/200, and 1/4000. Faster electronic shutter would enable the Network Camera to capture fast-moving
objects more clearly. Once the shutter is selected as Auto, the iris of the CCD will become fixed.
Auto tracking white balance: This option is usually selected when the Network Camera is placed in
outdoor environments. Adjusting the 0~8 level would help the Network Camera capturing video with
correct colors. The default value is set to 4.
White balance control: Select this option will disable Auto tracking white balance. This option is usually
selected when the Network Camera is placed in indoor environments. The administrator can adjust the
value for best color temperature: 3200k, 4000k, 4800k, 5600k, 6400k, 7200k, 8000k.
Low lux mode: Select this option would enable the Network Camera to capture clear images in poor
illuminative environments.
Auto switch to B/W in low lux mode: Select it to enable the Network Camera to automatically switch to B/
W in low lux mode.
User's Manual - 53

VIVOTEK

Enable BLC (Back Light Compensation): Select it when the object is too dark or too bright to be
recognized. It will give the captured images the necessary light compensation.
BLC sens level: Select 0~7 level to adjust the sensitivity of BLC detection. Select a higher level will raise
the sensitivity. The default value is set to 3.
BLC area selection: Click this button to open an area selection window. As the window shown below, the
video will be divided into 48 rectangle areas equally. Check some of the areas to enable BLC. Note that if
no area is selected, the Enable BLC option would be of no use.
The picture below illustrates the corresponding areas of the selection window. You can click Select All to
check all the areas in the window, or click Clear All to do vice versa. When completed with the settings
on this page, click Save to take effect and click Close to exit the page.

Back to the CCD Settings page, you can click Preview to fine-tune the image, or click Restore to recall
the original settings without incorporating the changes. When completed with the settings on this page,
click Save to take effect and click Close to exit the page.

Video quality settings for stream 1 / stream 2 Advanced Mode
The Network Camera offers two choices of video compression standards for real-time viewing: MPEG-4
and MJPEG.
Click the items to display the detailed configuration settings. You can set up two seperate streams for the
Network Camera for different viewing devices. For example, set a smaller frame size and lower bit rate
for remote viewing on mobile phones and a larger video size and a higher bit rate for live viewing on web
browsers.
If MPEG-4 mode is selected, it is streamed in RTSP protocol.

54 - User's Manual

VIVOTEK

There are four parameters provided in MPEG-4 mode which allow you to adjust the video performance:
■ Frame size
Select the video size. Note that a larger frame size takes up more bandwidth. The frame sizes are
selectable in the following resolutions:

CIF
QCIF

NTSC
704 x 480
352 x 240
176 x 120

PAL
704 x 576
352 x 288
176 x 144

■ Maximum frame rate
This limits the maximal refresh frame rate per second. Set the frame rate higher for a smoother video
quality. The frame rates are selectable at 1fps, 2fps, 3fps, 5fps, 8fps, 10fps, 15fps, 20fps, 25fps, and
30fps. You can also select Customize and manually enter a value.
■ Intra frame period
Determine how often to plant an I frame. The shorter the duration, the more likely you will get better
video quality, but at the cost of higher network bandwidth consumption. Select the intra frame period
from the following durations: 1/4 second, 1/2 second, 1 second, 2 seconds, 3 seconds, and 4 seconds.
■ Video quality
A complex scene generally produces a larger file size, meaning that higher bandwidth will be needed
for data transmission. Therefore, if Constant bit rate is selected, the bandwidth utilization is fixed at
a selected level, resulting in mutable video quality performance. The bit rates are selectable at the
following rates: 20Kbps, 30Kbps, 40Kbps, 50Kbps, 64Kbps, 128Kbps, 256Kbps, 512Kbps, 768Kbps,
1Mbps, 2Mbps, 3Mbps, and 4Mbps. You can also select Customize and manually enter a value.
On the other hand, if Fixed quality is selected, all frames are transmitted with the same quality;
bandwidth utilization is therefore unpredictable. The video quality can be adjusted to the following
settings: Medium, Standard, Good, Detailed, and Excellent. You can also select Customize and
manually enter a value.
If JPEG mode is selected, the Network Camera continuously sends JPEG images to the client, producing
a moving effect similar to a filmstrip. Every single JPEG image transmitted guarantees the same image
quality, which in turn comes at the expense of variable bandwidth usage. Because the media contents
are a combination of JPEG images, no audio data is transmitted to the client.

There are three parameters provided in MJPEG mode to control the video performance:
■ Frame size
Select the video size. Note that a larger frame size takes up more bandwidth. The frame sizes are
selectable in the following resolutions:

CIF
QCIF

NTSC
704 x 480
352 x 240
176 x 120

PAL
704 x 576
352 x 288
176 x 144

User's Manual - 55

VIVOTEK

■ Maximum frame rate
This limits the maximum refresh frame rate per second. Set the frame rate higher for smoother video
quality. The frame rates are selectable at 1fps, 2fps, 3fps, 5fps, 8fps, 10fps, 15fps, 20fps, 25fps, and
30fps. You can also select Customize and manually enter a value.
■ Video quality
The video quality can be adjusted to the following settings: Medium, Standard, Good, Detailed, and
Excellent. You can also select Customize and manually enter a value.

NOTE
► Video quality and fixed quality refers to the compression rate, so a lower value will produce higher
quality.

Audio Settings

Mute: Select this option to disable audio transmission from the Network Camera to all clients. Note that
if mute mode is turned on, no audio data will be transmitted even if audio transmission is enabled on the
Client Settings page. In that case, the following message is displayed:

Internal microphone input gain: Select the gain of the internal audio input according to ambient
conditions. Adjust the gain from +21 db (most sensitive) ~ -33 db (least sensitive).
External microphone input: Select the gain of the external audio input according to ambient conditions.
Adjust the gain from +21 db (most sensitive) ~ -33 db (least sensitive).
AAudio type: Select audio codec AAC or GSM-AMR and the bit rate.
■ AAC provides good sound quality at the cost of higher bandwidth consumption. The bit rates are
selectable from: 16Kbps, 32Kbps, 48Kbps, 64Kbps, 96Kbps, and 128Kbps.
■ GSM-ARM is designed to optimize speech quality and requires less bandwidth. The bit rates are
selectable from: 4.75Kbps, 5.15Kbps, 5.90Kbps, 6.7Kbps, 7.4Kbps, 7.95Kbps, 10.2Kbps, and
12.2Kbps.
When completed with the settings on this page, click Save to enable the settings.

NOTE
► The Network Camera offers two inputs to capture audio - internal microphone or external microphone.
The internal/external microphone switch is located on the back panel of the Network Camera.
56 - User's Manual

VIVOTEK

Motion Detection
This section explains how to configure the Network Camera to enable motion detection. A total
of three motion detection windows can be configured.

Video(TCP-AV)

Follow the steps below to enable motion detection:
1. Click New to add a new motion detection window.
2. In the Window Name text box, enter a name for the motion detection window.
■ To move and resize the window, drag and drop your mouse on the window.
■ To delete window, click X on the top right corner of the window.
3. Define the sensitivity to moving objects and the space ratio of all alerted pixels by moving the
Sensitivity and Percentage slider bar.
4. Click Save to enable the settings.
5. Select Enable motion detection to enable this function.

For example:
Video(TCP-AV)

The Percentage Indicator will rise or fall depending on the variation between sequential images. When
motions are detected by the Network Camera and are judged to exceed the defined threshold, the
red bar rises. Meanwhile, the motion detection window will be outlined in red. Photos or videos can be
captured instantly and configured to be sent to a remote server (Email, FTP) by utilizing this feature as a
trigger source. For more information on how to set an event, please refer to Application on page 65.

User's Manual - 57

VIVOTEK

A green bar indicates that even though motions have been detected, the event has not been triggered
because the image variations still fall under the defined threshold.

Percentage = 30%

NOTE
► How does motion detection work?
A

C

B

D

There are two motion detection parameters: Sensitivity and Percentage. In the illustration above,
frame A and frame B are two sequential images. Pixel differences between the two frames are
detected and highlighted in gray (frame C) and will be compared with the sensitivity setting. Sensitivity
is a value that expresses the sensitivity to moving objects. Higher sensitivity settings are expected to
detect slight movements while smaller sensitivity settings will neglect them. When the sensitivity is set
to 70%, the Network Camera defines the pixels in the purple areas as “alerted pixels” (frame D).
Percentage is a value that expresses the proportion of “alerted pixels” to all pixels in the motion
detection window. In this case, 50% of pixels are identified as “alerted pixels”. When the percentage is
set to 30%, the motions are judged to exceed the defined threshold; therefore, the motion window will
be outlined in red.
For applications that require a high level of security management, it is suggested to use higher
sensitivity settings and smaller percentage values.
58 - User's Manual

VIVOTEK

Camera Control
This section explains how to control the Network Camera’s Pan/Tilt/Zoom/Focus operation via
the control panel and how to preset positions.
Preset Locations

On this page, you can preset positions for the Network Camerato go to directly or patrol. A total of 128
preset positions can be configured.
Please follow the steps below to preset a position:
1. Adjust the shooting area to a desired position using the buttons on the right side of the window.
2. Click Set as home or Default home to define your home position.
3. Enter a name for the preset position, which allows for up to forty characters. Click Add to enable the
settings. The preset positions will be displayed under the Preset Location list on the left-hand side.
4. To add additional preset positions, please repeat step 1~3.
5. To remove a preset position from the list, select it from the drop-down list and click Delete.
6. Click Save to enable the settings.

1 functions are the same

as the control panel on
home page

3
2
3
5

6

User's Manual - 59

VIVOTEK

Patrol Settings

You can select preset locations for the Network Camera to patrol.
Please follow the steps below to set up a patrol schedule:
1. Click a preset location on the list and click Select.
2. The selected preset locations will be displayed on the Selected locations list.
3. Set the Dwelling time for the preset location during auto patrol. The default value is 10 seconds. You
can also manually set a value and click Update.
4. Repeat step 1 and 3 to select additional preset locations.
5. If you want to delete a selected location, select it from the list and click Remove.
6. Select a location and click Up or Down to rearrange the patrol order.
7. Adjust the Auto pan/patrol speed. (1~5 seconds)
8. Click Save to enable the settings.

ZOOM x10 xE2

7

1
2

5
6
8

60 - User's Manual

3

VIVOTEK

Digital Zoom

If you check this optionand click the Save button, the digital zoom function of CCD module will be
enabled.

Zoom Times Display

If you check this item and click the Save button, the zoom indicator will be displayed on the screen when
you zoom in/out as shown in the illustration above. Please remember to click Save to enable the settings.
Optical Zoom

ZOOM x10 xE2
Digital Zoom

Return to Home Position while Idle

If you select this option, the Network Camera will automatically return to the home position after idling for
a specific time span. Please remember to click Save to enable the settings.
■ The Preset Locations will be displayed on the Home page:

■ Click Go to: The Network Camera will move to the preset location.
■ Click Patrol: The Network Camera will patrol among the selected preset positions (from right to left) for
once.
User's Manual - 61

VIVOTEK

Homepage Layout

Advanced Mode

This section explains how to set up your own customized homepage layout.
Preview

This column shows the settings of your homepage layout. You can manually select the background and
font colors in Theme Options, the third column on this page. The settings will automatically show up in
this Preview field. The following shows the homepage using the default settings:

■ Hide Powered by VIVOTEK: If you check this item, it will be removed from the homepage.

Logo

Here you can change the logo at the top of your homepage.

Follow the steps below to upload a new logo:
1. Click Custom and the Browse field will appear.
2. Select a logo from your files.
3. Click Upload to replace the existing logo with a new one.
4. Enter a website link if necessary.
5. Click Save to enable the settings.

62 - User's Manual

VIVOTEK

Theme Options

Here you can change the color of your homepage layout. There are three types of preset patterns for you
to choose from. The new layout will simultaneously appear in the Preview filed. Click Save to enable the
settings.

Preset Patterns

Font Color of the Video
Title
Font color
Background Color of the
Control Area
Font Color of the Configuration Area
Background Color of the
Configuration Area

Background Color of the
Video Area
Frame Color

User's Manual - 63

VIVOTEK

■ Follow the steps below to set up the customed homepage:
1. Click Custom on the left column.
2. Click the field where you want to change the color on the right column.

Color Selector

Custom
Pattern
3. The palette window will pop up as shown below.

2

3

1

4

4. Drag the slider bar and click on the left square to select a desired color.
5. The selected color will show up in the corresponding fields and in the Preview column.
6. Click Save to enable the settings.

64 - User's Manual

VIVOTEK

Application

Advanced Mode

This section explains how to configure the Network Camera to react in response to particular
situations (event). A typical application is that when a motion is detected, the Network Camera
sends buffered images to a FTP server or e-mail address as notifications.
In the illustration on the right, an event can be triggered
Action
Event Trigger
by many sources, such as motion detection or external
(what to do)
digital input devices. When an event is triggered, you ex. Motion detection,
Periodically, Digital input,
System reboot
can specify what type of action that will be performed.
You can configure the Network Camera to send
Media
Server
(what to send)
(where to send)
snapshots or videos to your email address or FTP site.
ex. Snapshot, video clips,
system log, digital output

ex. Email, FTP, HTTP server,
network storage,
CF card

Customized Script

This function allows you to upload a sample script (.xml file) to the webpage, which will save your time on
configuring the settings. Please note that there is a limited number of customized scripts you can upload;
if the current amount of customized scripts has reached the limit, an alert message will pop up. If you
need more information, please ask for VIVOTEK’s technical support.

Click to upload a file

Click to modify the
script online

User's Manual - 65

VIVOTEK

Event Settings

In the Event Settings column, click Add to open the Event Settings page. On this page, you can
arrange three elements -- Trigger, Schedule, and Action to set an event. A total of 3 event settings can be
configured.

Event name: Enter a name for the event setting.
Enable this event: Select this option to enable the event setting.
Priority: Select the relative importance of this event (High, Normal, or Low). Events with a higher priority
setting will be executed first.
Detect next event after
motion is detected.

66 - User's Manual

seconds: Enter the duration in seconds to pause motion detection after a

VIVOTEK

An event is an action initiated by a user-defined trigger source; it is the causal arrangement of the
following three elements: Trigger, Event Schedule, and Action.
Trigger
This is the cause or stimulus which defines when to trigger the Network Camera. The trigger source can
be configured to use the Network Camera’s built-in motion detection mechanism or external digital input
devices.
There are several choices of trigger sources as shown below. Select the items to display the detailed
configuration options.
■ Video motion detection
This option makes use of the built-in motion detection mechanism as a trigger source. To enable this
function, you need to configure a Motion Detection Window first. For more information, please refer to
Motion Detection on page 57 for details.

■ Periodically
This option allows the Network Camera to trigger periodically for every other defined minute. Up to 999
minutes are allowed.

■ Digital input
This option allows the Network Camera to use an external digital input device or sensor as a trigger
source. Depending on your application, there are many choices of digital input devices on the market
which helps to detect changes in temperature, vibration, sound and light, etc.
■ System boot
This option triggers the Network Camera when the power to the Network Camera is disconnected.
■ Recording notify
This option allows the Network Camera to trigger when the recording disk is full or when recording
starts to rewrite older data. If you want receive Recording notify message, please refer to page 76
for detailed information.

User's Manual - 67

VIVOTEK

Event Schedule
Specify the period for the event.

■ Select the days of the week.
■ Select the recording schedule in 24-hr time format.
Action
Define the actions to be performed by the Network Camera when a trigger is activated.

■ Trigger digital output for seconds
Select this option to turn on the external digital output device when a trigger is activated. Specify the
length of the trigger interval in the text box.
■ Move to preset location
Select this option, the Network Camera will move to the preset location when a trigger is activated.
Please setup the preset locations first. Please refer to Preset Locations on page 59 for detailed
information.

To set an event with recorded video or snapshots, it is necessary to configure the server and
media settings so that the Network Camera will know what action to take (such as which server
to send the media files to) when a trigger is activated.
■ Add Server / Add Media

Click Add Server to configure Server Settings. For more information, please refer to Server Settings
on page 71.
Click Add Media to configure Media Settings. For more information, please refer to Media Settings on
page 74.

68 - User's Manual

VIVOTEK

Here is an example of Event Settings page:

When completed, click Save to enable the settings and click Close to exit Event Settings page. The new
event settings / server settings / media settings will appear in the event drop-down list on the Application
page.

User's Manual - 69

VIVOTEK

Here is an example of Application page with an event setting:

When the Event Status is ON, once an event is triggered by motion detection, the Network Camera will
automatically send snapshots via e-mail.
If you want to stop the event trigger, you can click ON to turn it to OFF status or click Delete to remove
the event setting.
To remove a server setting from the list, select a server name from the drop-down list and click Delete.
Note that only when the server setting is not being applied to an event setting can it be deleted.
To remove a media setting from the list, select a media name from the drop-down list and click Delete.
Note that only when the media setting is not being applied to an event setting can it be deleted.

70 - User's Manual

VIVOTEK

Server Settings

Click Add Server on Event Settings page to open the Server Setting page. On this page, you can specify
where the notification messages are sent when a trigger is activated. A total of 5 server settings can be
configured.
Server name: Enter a name for the server setting.
Server Type
There are four choices of server types available: Email, FTP, HTTP, and Network storage. Select the item
to display the detailed configuration options. You can configure either one or all of them.
Email: Select to send the media files via email when a trigger is activated.

■ Sender email address: Enter the email address of the sender.
■ Recipient email address: Enter the email address of the recipient.
■ Server address: Enter the domain name or IP address of the email server.
■ User name: Enter the user name of the email account if necessary.
■ Password: Enter the password of the email account if necessary.
■ Server port: The default mail server port is set to 25. You can also manually set another port.
If your SMTP server requires a secure connection (SSL), check This server requires a secure
connection (SSL).
To verify if the email settings are correctly configured, click Test. The result will be shown in a pop-up
window. If successful, you will also receive an email indicating the result.

Click Save to enable the settings, then click Close to exit the page.
User's Manual - 71

VIVOTEK

FTP: Select to send the media files to an FTP server when a trigger is activated.

■ Server address: Enter the domain name or IP address of the FTP server.
■ Server port
By default, the FTP server port is set to 21. It can also be assigned to another port number between
1025 and 65535.
■ User name: Enter the login name of the FTP account.
■ Password: Enter the password of the FTP account.
■ Remote folder name
Enter the folder where the media file will be placed. If the folder name does not exist, the Network
Camera will create one on the FTP server.
■ Passive mode
Most firewalls do not accept new connections initiated from external requests. If the FTP server
supports passive mode, select this option to enable passive mode FTP and allow data transmission to
pass through the firewall.
To verify if the FTP settings are correctly configured, click Test. The result will be shown in a pop-up
window as shown below. If successful, you will also receive a test.txt file on the FTP server.

Click Save to enable the settings, then click Close to exit the page.

72 - User's Manual

VIVOTEK

HTTP: Select to send the media files to an HTTP server when a trigger is activated.

■ URL: Enter the URL of the HTTP server.
■ User name: Enter the user name if necessary.
■ Password: Enter the password if necessary.
To verify if the HTTP settings are correctly configured, click Test. The result will be shown in a pop-up
window as below. If successful, you will receive a test.txt file on the HTTP server.

Click Save to enable the settings, then click Close to exit the page.
Network storage: Select to send the media files to a network storage location when a trigger is activated.
Please refer to Network Storage Setting on page 78 for details.
Click Save to enable the settings, then click Close to exit the page.
When completed, the new server settings will automatically be displayed on the Event Settings page.
For example:

User's Manual - 73

VIVOTEK

Media Settings

Click Add Media on the Event Settings page to open the Media Settings page. On this page, you can
specify the type of media that will be sent when a trigger is activated. A total of 5 media settings can be
configured.
Media name: Enter a name for the media setting.
Media Type
There are three choices of media types available: Snapshot, Video clip, and System log. Select the item
to display the detailed configuration options. You can configure either one or all of them.
Snapshot: Select to send snapshots when a trigger is activated.

■ Source: Select to take snapshots from stream 1 or stream 2.
■ Send pre-event images
The Network Camera has a buffer area; it temporarily holds data up to a certain limit. Enter a number
to decide how many images to capture before a trigger is activated. Up to 7 images can be generated.
■ Send post-event images
Enter a number to decide how many images to capture after a trigger is activated. Up to 7 images can
be generated.
For example, if both the Send pre-event images and Send post-event images are set to 7, a total of 15
images are generated after a trigger is activated.
1 pic.

2 pic.

3 pic.

4 pic.

5 pic.

6 pic.

7 pic.

8 pic.

9 pic.

10 pic.

11 pic. 10 pic.

Trigger Activation

■ File name prefix
Enter the text that will be appended to the front of the file name.
■ Add date and time suffix to the file name
Select this option to add a date/time suffix to the file name.
For example:
Snapshot_20080104_100341
File name prefix Date and time suffix
The format is: YYYYMMDD_HHMMSS

Click Save to enable the settings, then click Close to exit the page.
74 - User's Manual

12 pic. 13 pic.

14 pic.

15 pic.

VIVOTEK

Video clip: Select to send video clips when a trigger is activated.

■ Source: Select to record video clips from stream 1 or stream 2.
■ Pre-event recording
The Network Camera has a buffer area; it temporarily holds data up to a certain limit. Enter a number
to decide the duration of recording before a trigger is activated. Up to 9 seconds can be set.
■ Maximum duration
Specify the maximum recording duration in seconds. Up to 10 seconds can be set.
For example, if pre-event recording is set to five seconds and the maximum duration is set to ten
seconds, the Network Camera continues to record for another 4 seconds after a trigger is activated.
1 sec.

2 sec.

3 sec.

4 sec.

5 sec.

6 sec.

7 sec.

8 sec.

9 sec.

10 sec.

Trigger Activation

■ Maximum file size
Specify the maximum file size allowed.
■ File name prefix
Enter the text that will appended to the front of the file name.
For example:
Video_20080104_100341

File name prefix Date and time suffix
The format is: YYYYMMDD_HHMMSS

Click Save to enable the settings, then click Close to exit the page.
System log: Select to send a system log when a trigger is activated.
Click Save to enable the settings, then click Close to exit the page.

User's Manual - 75

VIVOTEK

Recording notify message: Select to send a recording notification message when a trigger is activated.
The following is an example of a recording notification message (.txt file), which shows a list of deleted
previously-recorded data due to cycle recording.

When completed, click Save to enable the settings and click Close to exit this page. The new media
settings will appear on the Event Settings page.
You can continue to select a server and media type for the event.

■ Create folders by date, time, and hour automatically: If you check this item, the system will generate
folders automatically by date.
■ View: Click this button to open a file list window. This function is only for Network Storage.
The following is an example of a file destination with video clips:
20081120
20081121

The format is: YYYYMMDD
Click to open the directory

20081122

Click to delete selected items

76 - User's Manual

Click to delete all recorded data

VIVOTEK

Click 20081120 to open the directory:
The format is: HH (24r)
Click to open the file list for that hour

Click to go back to the previous
level of the directory

Click to delete
selected items
Click to delete all
recorded data

The format is: File name prefix + Minute (mm)
You can set up the file name prefix on Media Settings page.
Please refer to page 74 for detailed information.

User's Manual - 77

VIVOTEK

Recording

Advanced Mode

This section explains how to configure the recording settings for the Network Camera.
Recording Settings

NOTE
► Before setting up this page, please set up the Network Storage on the Server Settings page first.
Network Storage Setting
Click Server to open the Server Settings page and follow the steps below to set up:
1. Fill in the information for your server.
For example:

3

Network storage path
(\\server name or IP address\folder name)

1

2

4

User name and password for your server

2. Click Test to check the setting. The result will be shown in the pop-up window.

78 - User's Manual

VIVOTEK

If successful, you will receive a test.txt file on the network storage server.

3. Enter a server name.
4. Click Save to complete the settings and click Close to exit the page.
Recording Settings
Click Add to open the recording setting page. On this page, you can define the recording source,
recording schedule and recording capacity. A total of 2 recording settings can be configured.

Recording name: Enter a name for the recording setting.
Enable this recording: Select this option to enable video recording.
Priority: Select the relative importance of the recording setting (High, Normal, and Low).
User's Manual - 79

VIVOTEK

Source: Select the recording source (stream 1 or stream 2).
Recording Schedule: Specify the recording duration.
■ Select the days of the week.
■ Select the recording start and end times in 24-hr time format.
Destination: You can select the network storage to store the recorded video files.
Capacity: You can choose either the “entire free space available” or “limit the recording size”. The
recording size limit must be larger than the reserved amount for cyclic recording.
File name prefix: Enter the text that will be appended to the front of the file name.
Enable cyclic recording: If you check this item, when the maximum capacity is reached, the oldest file
will be overwritten by the latest one. The reserved amount is reserved for cyclic recording to prevent
malfunction. This value must be larger than 15 MBytes.
If you want to enable recording notification, please click Application to set up. Please refer to Trigger >
Recording notify on page 67 for detailed information.
When completed, select Enable this recording. Click Save to enable the setting and click Close to exit
this page. When the system begins recording, it will send the recorded files to the Network Storage.
The new recording name will appear in the drop-down list on the recording page as shown below.
To remove a recording setting from the list, select a recording name from the drop-down list and click
Delete.

■ Click Video (Name): Opens the Recording Settings page to modify.
■ Click ON (Status): The Status will become OFF and stop recording.
■ Click NAS (Destination): Opens the file list of recordings as shown below. For more information about
folder naming rule, please refer to page 77 for details.
20081120
20081121
20081122

80 - User's Manual

VIVOTEK

System Log

Advanced Mode

This section explains how to configure the Network Camera to send the system log to the
remote server as backup.
Remote Log

You can configure the Network Camera to send the system log file to a remote server as a log backup.
Before utilizing this feature, it is suggested that the user install a log-recording tool to receive system log
messages from the Network Camera. An example is Kiwi Syslog Daemon. Visit http://www.kiwisyslog.
com/kiwi-syslog-daemon-overview/.

Follow the steps below to set up the remote log:
1. In the IP address text box, enter the IP address of the remote server.
2. In the port text box, enter the port number of the remote server.
3. When completed, select Enable remote log and click Save to enable the setting.

Current Log

This column displays the system log in chronological order. The system log is stored in the Network
Camera’s buffer area and will be overwritten when reaching a maximum limit.
User's Manual - 81

VIVOTEK

View Parameters

Advanced Mode

The View Parameters page lists the entire system’s parameters in alphabetical order. If you
need technical assistance, please provide the information listed on this page.

82 - User's Manual

VIVOTEK

Maintenance
This chapter explains how to restore the Network Camera to factory default, upgrade firmware
version, etc.
Reboot

This feature allows you to reboot the Network Camera, which takes about one minute to complete. When
completed, the live video page will be displayed in your browser. The following message will be displayed
during the rebooting process.

If the connection fails after rebooting, manually enter the IP address of the Network Camera in the
address field to resume the connection.

Restore

This feature allows you to restore the Network Camera to factory default settings.
Network Type: Select this option to retain the Network Type settings. (Please refer to Network Type on
page 32.)
Daylight Saving Time: Select this option to retain the Daylight Saving Time settings. (Please refer to
System on page 24.)
Custom Language: Select this option to retain the Custom Language settings.
If none of the options is selected, all settings will be restored to factory default.
The following message is displayed during the restoring process.

Calibrate

This feature re-calibrate the home position to the default center to recover the any displacement caused
by external forces. Please note that there is no confirm message box after clicking on Calibrate, and the
Network Camera will calibrate immediately.
User's Manual - 83

VIVOTEK

Export / Upload Files Advanced Mode
This feature allows you to Export / Upload daylight saving time rules, custom language files, and setting
backup files.

Export daylight saving time configuration file: Click to set the start and end time of DST.
Follow the steps below to export:
1. In the Export files column, click Export to export the daylight saving time configuration file from the
Network Camera.
2. A file download dialog will pop up as shown below. Click Open to review the XML file or click Save to
store the file for editing.

3. Open the file with Microsoft® Notepad and locate your time zone; set the start and end time of DST.
When completed, save the file.
In the example below, DST begins each year at 2:00 a.m. on the second Sunday in March and ends at
2:00 a.m. on the first Sunday in November.

84 - User's Manual

VIVOTEK

Upload daylight saving time rule: Click Browse… and specify the XML file to upload.
If the incorrect date and time are assigned, you will see the following warning message when uploading
the file to the Network Camera.

The following message is displayed when attempting to upload an incorrect file format.

Export language file: Click to export language strings. VIVOTEK provides nine languages: English,
Deutsch, Español, Français, Italiano, 日本語, Português, 簡体中文, and 繁體中文.
Upload custom language file: Click Browse… and specify your own custom language file to upload.
Export setting backup file: Click to export all parameters for the device and user-defined scripts.
Upload setting backup file: Click Browse… to upload a setting backup file. Please note that the model
and firmware version of the device should be the same as the setting backup file. If you have set up a
fixed IP or other special settings for your device, it is not suggested to upload a settings backup file.

Upgrade Firmware

This feature allows you to upgrade the firmware of your Network Camera. It takes a few minutes to
complete the process.
Note: Do do not power off the Network Camera during the upgrade!
Follow the steps below to upgrade the firmware:
1. Download the latest firmware file from the VIVOTEK website. The file is in .pkg file format.
2. Click Browse… and specify the firmware file.
3. Click Upgrade. The Network Camera starts to upgrade and will reboot automatically when the upgrade
completes.
If the upgrade is successful, you will see “Reboot system now!! This connection will close”. After that, reaccess the Network Camera.
User's Manual - 85

VIVOTEK

The following message is displayed when the upgrade has succeeded.
Reboot system now!!
This connection will close.

The following message is displayed when you have selected an incorrect firmware file.
Starting firmware upgrade...
Do not power down the server during the upgrade.
The server will restart automatically after the upgrade is
completed.
This will take about 1 - 5 minutes.
Wrong PKG file format
Unpack fail

86 - User's Manual

VIVOTEK

Appendix

URL Commands for the Network Camera
Overview
For some customers who already have their own web site or web control application, the Network
Camera/Video Server can be easily integrated through URL syntax. This section specifies the external
HTTP-based application programming interface. The HTTP-based camera interface provides the
functionality to request a single image, control camera functions (PTZ, output relay etc.), and get and set
internal parameter values. The image and CGI-requests are handled by the built-in Web server.

Style Convention
In URL syntax and in descriptions of CGI parameters, text within angle brackets denotes content that
is to be replaced with either a value or a string. When replacing the text string, the angle brackets
should also be replaced. An example of this is the description of the name for the server, denoted with
 in the URL syntax description below, that is replaced with the string myserver in the URL
syntax example further down in the page.
URL syntax is denoted with the word "Syntax:" written in bold face followed by a box with the referenced
syntax as shown below. For example, name of the server is written as  and is intended to
be replaced with the name of the actual server. This can either be a name, e.g., "mywebcam" or "thecam.
adomain.net" or the associated IP number for the server, e.g., 192.168.0.220.
Syntax:
http:///cgi-bin/viewer/video.jpg

Description of returned data is written with "Return:" in bold face followed by the returned data in a box. All data
returned as HTTP formatted, i.e., starting with the string HTTP is line separated with a Carriage Return and Line
Feed (CRLF) printed as \r\n.
Return:
HTTP/1.0  \r\n

URL syntax examples are written with "Example:" in bold face followed by a short description and a light grey box
with the example.
Example: request a single snapshot image
http://mywebserver/cgi-bin/viewer/video.jpg

User's Manual - 87

VIVOTEK

General CGI URL Syntax and Parameters
CGI parameters are written in lower-case and as one word without any underscores or other separators. When the CGI
request includes internal camera parameters, these parameters must be written exactly as they are named in the camera
or video server. The CGIs are organized in functionally-related directories under the cgi-bin directory. The file
extension .cgi is required.
Syntax:
http:///cgi-bin/[/...]/.
[?=[&=...]]

Example: Set digital output #1 to active
http://mywebserver/cgi-bin/dido/setdo.cgi?do1=1

Security Level
SECURITY LEVEL

SUB-DIRECTORY

DESCRIPTION

0

anonymous

Unprotected.

1 [view]

anonymous, viewer, dido,

1. Can view, listen, talk to camera.

camctrl

2. Can control DI/DO, PTZ of the camera.

anonymous, viewer, dido,

Operator access rights can modify most of the camera’s parameters

camctrl, operator

except some privileges and network options.

anonymous, viewer, dido,

Administrator access rights can fully control the camera’s

camctrl, operator, admin

operations.

N/A

Internal parameters. Unable to be changed by any external

4 [operator]

6 [admin]

7

interfaces.

Get Server Parameter Values
Note: The access right depends on the URL directory.
Method: GET/POST

Syntax:
http:///cgi-bin/anonymous/getparam.cgi?[]
[&…]

http:///cgi-bin/viewer/getparam.cgi?[]
[&…]

88 - User's Manual

VIVOTEK
http:///cgi-bin/operator/getparam.cgi?[]
[&…]

http:///cgi-bin/admin/getparam.cgi?[]
[&…]

Where the  should be [_] or [.]. If you do not specify any parameters, all
the parameters on the server will be returned. If you specify only , the parameters of the related group will be
returned.

When querying parameter values, the current parameter values are returned.
A successful control request returns parameter pairs as follows:
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: \r\n
\r\n

where  is
=\r\n
[]

 is the actual length of content.

Example: Request IP address and its response
Request:
http://192.168.0.123/cgi-bin/admin/getparam.cgi?network_ipaddress

Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n

Set Server Parameter Values
Note: The access right depends on the URL directory.
Method: GET/POST

User's Manual - 89

VIVOTEK

Syntax:
http:///cgi-bin/anonymous/setparam.cgi? =
[&=…][&update=][&return=]

http:///cgi-bin/viewer/setparam.cgi? =
[&=…][&update=] [&return=]

http:///cgi-bin/operator/setparam.cgi? =
[&=…][&update=] [&return=]

http:///cgi-bin/admin/setparam.cgi? =
[&=…][&update=] [&return=]

PARAMETER

VALUE

DESCRIPTION

_

value to assigned

Assign  to the parameter _.

update



Set to 1 to update all fields (no need to update parameter in each group).

return



Redirect to the page  after the parameter is assigned. The
 can be a full URL path or relative path according to the
current path. If you omit this parameter, it will redirect to an empty page.

(Note: The return page can be a general HTML file (.htm, .html) or a
VIVOTEK server script executable (.vspx) file. It cannot be a CGI command
or have any extra parameters. This parameter must be placed at the end of
the parameter list

Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: \r\n
\r\n

where  is
=\r\n
[]
Only the parameters that you set and are readable will be returned.

Example: Set the IP address of server to 192.168.0.123:
Request:
http://myserver/cgi-bin/admin/setparam.cgi?network_ipaddress=192.168.0.123

90 - User's Manual

VIVOTEK

Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n

Available parameters on the server
Valid values:
VALID VALUES

DESCRIPTION

string[]

Text strings shorter than ‘n’ characters. The characters “,’, <,>,& are invalid.

password[]

The same as string but displays ‘*’ instead.

integer

Any number between (-231 – 1) and (231 – 1).

positive integer

Any number between 0 and (232 – 1).

 ~ 

Any number between ‘m’ and ‘n’.

domain name[]

A string limited to a domain name shorter than ‘n’ characters (eg. www.ibm.com).

email address []

A string limited to an email address shorter than ‘n’ characters (eg. joe@www.ibm.com).

ip address

A string limited to an IP address (eg. 192.168.1.1).

mac address

A string limited to contain a MAC address without hyphens or colons.

boolean

A boolean value of 1 or 0 represents [Yes or No], [True or False], [Enable or Disable].

,

Enumeration. Only given values are valid.

,
,
…
blank

A blank string.

everything inside <>

A description

positive Integer

Any number between 0 and (232 – 1)

integer primary key

SQLite data type. A 32-bit signed integer. The value is assigned a unique integer by the
server.

text

SQLite data type. The value is a text string, stored using the database encoding (UTF-8,
UTF-16BE or UTF-16-LE).

coordinate

x, y coordinate (eg. 0,0)

window size

window width and height (eg. 800x600)

NOTE: The camera should not be restarted when parameters are changed.

User's Manual - 91

VIVOTEK
Group: system
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
hostname

string[40]

1/6

Host name of server
(Network Camera,
Wireless Network Camera)

ledoff



6/6

Turn on (0) or turn off (1) all led indicators.

date

,

6/6

Current date of system. Set to ‘keep’ to keep date

keep,

unchanged. Set to ‘auto’ to use NTP to synchronize date.

auto
time

,

6/6

keep,

Current time of the system. Set to ‘keep’ to keep time
unchanged. Set to ‘auto’ to use NTP to synchronize time.

auto
datetime


ntp

timezoneindex

,
,

*Do not use “skip to invoke default server” for default



value.

-480 ~ 520

6/6

Indicate timezone and area.
-480: GMT-12:00 Eniwetok, Kwajalein
-440: GMT-11:00 Midway Island, Samoa
-400: GMT-10:00 Hawaii
-360: GMT-09:00 Alaska
-320: GMT-08:00 Las Vegas, San_Francisco,
Vancouver
-280: GMT-07:00 Mountain Time, Denver
-281: GMT-07:00 Arizona
-240: GMT-06:00 Central America, Central Time, Mexico
City, Saskatchewan
-200: GMT-05:00 Eastern Time, New York, Toronto
-201: GMT-05:00 Bogota, Lima, Quito, Indiana
-180: GMT-04:30 Caracas
-160: GMT-04:00 Atlantic Time, Canada, La Paz,
Santiago
-140: GMT-03:30 Newfoundland
-120: GMT-03:00 Brasilia, Buenos Aires,
Georgetown, Greenland
-80: GMT-02:00 Mid-Atlantic
-40: GMT-01:00 Azores, Cape_Verde_IS.
0: GMT Casablanca, Greenwich Mean Time: Dublin,

92 - User's Manual

VIVOTEK
Edinburgh, Lisbon, London
40: GMT 01:00 Amsterdam, Berlin, Rome, Stockholm,
Vienna, Madrid, Paris
41: GMT 01:00 Warsaw, Budapest, Bern
80: GMT 02:00 Athens, Helsinki, Istanbul, Riga
81: GMT 02:00 Cairo
82: GMT 02:00 Lebanon, Minsk
83: GMT 02:00 Israel
120: GMT 03:00 Baghdad, Kuwait, Riyadh, Moscow, St.
Petersburg, Nairobi
121: GMT 03:00 Iraq
140: GMT 03:30 Tehran
160: GMT 04:00 Abu Dhabi, Muscat, Baku, Tbilisi,
Yerevan
180: GMT 04:30 Kabul
200: GMT 05:00 Ekaterinburg, Islamabad, Karachi,
Tashkent
220: GMT 05:30 Calcutta, Chennai, Mumbai, New Delhi
230: GMT 05:45 Kathmandu
240: GMT 06:00 Almaty, Novosibirsk, Astana, Dhaka,
Sri Jayawardenepura
260: GMT 06:30 Rangoon
280: GMT 07:00 Bangkok, Hanoi, Jakarta, Krasnoyarsk
320: GMT 08:00 Beijing, Chongging, Hong Kong, Kuala
Lumpur, Singapore, Taipei
360: GMT 09:00 Osaka, Sapporo, Tokyo, Seoul, Yakutsk
380: GMT 09:30 Adelaide, Darwin
400: GMT 10:00 Brisbane, Canberra, Melbourne,
Sydney, Guam, Vladivostok
440: GMT 11:00 Magadan, Solomon Is., New Caledonia
480: GMT 12:00 Aucklan, Wellington, Fiji, Kamchatka,
Marshall Is.
520: GMT 13:00 Nuku'Alofa
daylight_enable



6/6

Enable automatic daylight saving time in time zone.

daylight_dstactualmode



6/7

Check if current time is under daylight saving time.

daylight_auto_begintime

string[19]

6/7

Display the current daylight saving start time.
(product dependent)

daylight_auto_endtime

string[19]

6/7

Display the current daylight saving end time.
(product dependent)

User's Manual - 93

VIVOTEK
updateinterval

0,

6/6

0 to Disable automatic time adjustment, otherwise, it

3600,

indicates the seconds between NTP automatic update

86400,

intervals.

604800,
2592000
restore

0,

7/6


reset

0,

 seconds.
7/6


restoreexceptnet



Restore the system parameters to default values after

Restart the server after  seconds if  is
non-negative.

7/6

Restore the system parameters to default values except
(ipaddress, subnet, router, dns1, dns2, pppoe).
This command can cooperate with other
“restoreexceptXYZ” commands. When cooperating with
others, the system parameters will be restored to the
default value except for a union of the combined results.

restoreexceptdst



7/6

Restore the system parameters to default values except
all daylight saving time settings.
This command can cooperate with other
“restoreexceptXYZ” commands. When cooperating with
others, the system parameters will be restored to
default values except for a union of combined results.

restoreexceptlang



7/6

Restore the system parameters to default values except
the custom language file the user has uploaded.
This command can cooperate with other
“restoreexceptXYZ” commands. When cooperating with
others, the system parameters will be restored to the
default value except for a union of the combined results.

Subgroup of system: info (The fields in this group are unchangeable.)
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
modelname

string[40]

0/7

Internal model name of the server (eg. IP7139)

serialnumber



0/7

12 characters MAC address (without hyphens).

firmwareversion

string[40]

0/7

Firmware version, including model, company, and
version number in the format:


language_count



0/7

Number of webpage languages available on the server.

language_i<0~(count-1)>

string[16]

0/7

Available language lists.

customlanguage_maxcount



0/7

Maximum number of custom languages supported on
the server.

94 - User's Manual

VIVOTEK
customlanguage_count



0/7

Number of custom languages which have been
uploaded to the server.

customlanguage_i<0~(ma

string

0/7

Custom language name.

VALUE

SECURITY

xcount-1)>

Group: status
NAME

DESCRIPTION

(get/set)
videomode_c0

ntsc,

4/7

The actual modulation type

pal
di_i<0~(ndi-1)>

(videoin.type=0).



1/7

0 => Inactive, normal
1 => Active, triggered

do_i<0~(ndo-1)>



1/7

0 => Inactive, normal
1 => Active, triggered

onlinenum_rtsp

integer

6/7

Current number of RTSP connections.

onlinenum_httppush

integer

6/7

Current number of HTTP push server connections.

eth_i0



1/99

Get network information from mii-tool.

Group: di_i<0~(ndi-1)>
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
normalstate

high,

1/1

Indicates open circuit or closed circuit (inactive

low

status)

Group: do_i<0~(ndo-1)>
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
normalstate

open,

1/1

grounded

Indicate open circuit or closed circuit (inactive
status)

Group: security
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
privilege_do

view, operator, admin

6/6

Indicate which privileges and above can control
digital output

privilege_camctrl

view, operator, admin

6/6

Indicate which privileges and above can control PTZ

user_i0_name

root

6/7

User name of root

user_i<1~20>_name

string[64]

6/7

User name

user_i0_pass

password[64]

6/6

Root password

User's Manual - 95

VIVOTEK
user_i<1~20>_pass

password[64]

7/6

User password

user_i0_privilege

admin

6/7

Root privilege

user_i<1~20>_

viewer,

6/6

User privilege

privilege

operator,
admin

Group: network
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
type

lan,

6/6

Network connection type.

6/6

1 => Get ipaddress, subnet, router, dns1, dns2 from DHCP

pppoe
resetip



server at next reboot.
0 => Use preset ipaddress, subnet, rounter, dns1, and dns2.
ipaddress



6/6

IP address of server.

subnet



6/6

Subnet mask.

router



6/6

Default gateway.

dns1



6/6

Primary DNS server.

dns2



6/6

Secondary DNS server.

wins1



6/6

Primary WINS server.

wins2



6/6

Secondary WINS server.

Subgroup of network: ipv6
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
enable



6/6

Enable IPv6.

addonipaddress



6/6

IPv6 IP address.

addonprefixlen

0~128

6/6

IPv6 prefix length.

addonrouter



6/6

IPv6 router address.

addondns



6/6

IPv6 DNS address.

allowoptional



6/6

Allow manually setup of IP address setting.

VALUE

SECURITY

DESCRIPTION

Subgroup of network: ftp
NAME

(get/set)
port

96 - User's Manual

21, 1025~65535

6/6

Local ftp server port.

VIVOTEK
Subgroup of network: http
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
port

80, 1025 ~ 65535

6/6

HTTP port.

alternateport

1025~65535

6/6

Alternate HTTP port.

authmode

basic,

1/6

HTTP authentication mode.

digest
s0_accessname

string[32]

1/6

HTTP server push access name for stream 1.

s1_accessname

string[32]

1/6

HTTP server push access name for stream 2.

anonymousviewing



1/6

Enable anoymous streaming viewing.

Subgroup of network: https
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
port

443, 1025 ~ 65535

6/6

HTTPS port.

Subgroup of network: rtsp
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
port

554, 1025 ~ 65535

1/6

RTSP port.

anonymousviewing



1/6

Enable anoymous streaming viewing.

authmode

disable,

1/6

RTSP authentication mode.

basic,
digest
s0_accessname

string[3b;42]

1/6

RTSP access name for stream1.

s1_accessname

string[32]

1/6

RTSP access name for stream2.

s0_audiotrack



6/6

The current audio track for stream1.
-1 => audio mute

s1_audiotrack



6/6

The current audio track for stream2.
-1 => audio mute

Subgroup of network_rtsp_s<0~(n-1)>: multicast, n is stream count
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
alwaysmulticast



4/4

Enable always multicast.

ipaddress



4/4

Multicast IP address.

videoport

1025 ~ 65535

4/4

Multicast video port.

audioport

1025 ~ 65535

4/4

Multicast audio port.

ttl

1 ~ 255

4/4

Mutlicast time to live value.

User's Manual - 97

VIVOTEK
Subgroup of network: sip
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
port

554, 1025 ~ 65535

6/6

SIP port.
(capability.protocol.sip=1)

Subgroup of network: rtp
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
videoport

1025 ~ 65535

6/6

Video channel port for RTP.
(capability.protocol.rtp_unicast=1)

audioport

1025 ~ 65535

6/6

Audio channel port for RTP.
(capability.protocol.rtp_unicast=1)

Subgroup of network: pppoe
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
user

string[128]

6/6

PPPoE account user name.

pass

password[64]

6/6

PPPoE account password.

Group: wireless (only in PZ71x2)
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
ssid

string[32]

6/6

SSID for wireless lan settings.
The valid characters are [A-Z] [a-z] [0-9] [/] [.] [_] [=] [ ]
[-] [+] [*].

wlmode

Infra,

6/6

Adhoc
channel

Infra: Infrastructure

1~11

or

1 ~ 13

or

Europe

10~11

or

Spain

10~13

or

France

6/6

1~14
txrate

Wireless mode.

0 ~ 12

USA and Canada

All
6/6

0 -> Auto
1 -> 1Mbps
2 -> 2Mbps
3 -> 5.5Mbps
4 -> 11Mbps
5 -> 6Mbps
6 -> 9Mbps

98 - User's Manual

VIVOTEK
7 -> 12Mbps
8 -> 18Mbps
9 -> 24Mbps
10 -> 36Mbps
11 -> 48Mbps
12 -> 54Mbps
encrypt

0~3

6/6

Encryption method (product dependent):
0=> NONE,
1 => WEP,
2 => WPA,
3 => WPA2PSK

authmode

OPEN, SHARED

6/6

Authentication mode.

keylength

64, 128

6/6

Key length in bits.

keyformat

HEX, ASCII

6/6

Key1 ~ key4 presentation format.

keyselect

1~4

6/6

Default key number.

key1

password [32]

6/6

WEP key1 for encryption.
The valid characters are [A-Z] [a-z] [0-9].

key2

password [32]

6/6

WEP key2 for encryption.
The valid characters are [A-Z] [a-z] [0-9].

key3

password [32]

6/6

WEP key3 for encryption.
The valid characters are [A-Z] [a-z] [0-9].

key4

password [32]

6/6

WEP key4 for encryption.
The valid characters are [A-Z] [a-z] [0-9].

domain

‘U’ for USA

6/7

Wireless domain.

‘C’ for Canada
‘E’ for Euro
‘S’ for Spain
‘F’ for France
‘I’ for Isrel
‘A’ for All
algorithm

AES, TKIP

6/6

Algorithm

presharedkey

password [63]

6/6

WPA mode pre-shared key.
The valid characters are [A-Z] [a-z] [0-9].

Group: ipfilter
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
enable



6/6

Enable access list filtering.

admin_enable



6/6

Enable administrator IP address.

User's Manual - 99

VIVOTEK
admin_ip

String[44]

6/6

Administrator IP address.

maxconnection

1~10

6/6

Maximum number of concurrent streaming
connection(s).

allow_i<0~9>_start

1.0.0.0 ~

6/6

Allowed starting IPv4 address for connection.

6/6

Allowed ending IPv4 address for connection.

6/6

Denied starting IPv4 address for connection.

6/6

Denied ending IPv4 address for connection.

255.255.255.255
allow_i<0~9>_end

1.0.0.0 ~
255.255.255.255

deny_i<0~9>_start

1.0.0.0 ~
255.255.255.255

deny_i<0~9>_end

1.0.0.0 ~
255.255.255.255

ipv6_allow_i<0~9>

String[44]

6/6

Allowed IPv6 address for connection.

ipv6_deny_i<0~9>

String[44]

6/6

Denied IPv6 address for connection.

Group: videoin_c<0~(n-1)> for n channel products, m is stream number
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
whitebalancemode

0~1

4/4

0: auto tracking white balance
1: white balance control

autotrackingwhitebalance

0~8

4/4

Adjust colors by setting different levels. Set
videoin_c0_whitebalancemode to 0 before setting this
parameter.

whitebalancecontrol

0~8

4/4

Set different levels to meet different color temperatures
(3200K~9600K).
Set whitebalancemode to 1 before setting this parameter.

irislevel

1~8

4/4

Iris level when connect to auto iris lens. 8 => most
brightness, 1 => most darkness

autoiris

0~1

4/4

set 1 to enable auto iris, set 0 to disable auto iris

autoelectronicshutter

0~7

4/4

Set electronica shutter speed. Set 0 for auto shutter, set 1
for fixed at 1/60 (1/50). Bigger value, faster shutter.

enableblc

0~1

4/4

Enable backlight compensation

lowluxmode

0~1

4/4

Turn off or on low lux mode

obwlowluxmode

0~1

4/4

Turn on or off black/white video in low lux mode

blcarea_i<0~5>

0~7

4/4

Set back light compensation level

blcsenslevel

0~7

4/4

Set back light compensation level

100 - User's Manual

VIVOTEK
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
color

0, 1

4/4

0 =>monochrome
1 => color

flip



4/4

flip the image

mirror



4/4

mirror the image

text

string[16]

1/4

enclosed caption

imprinttimestamp



4/4

Overlay time stamp on video

s<0~(m-1)>_codectype

mpeg4, mjpeg

4/4

video codec type

s<0~(m-1)>_resolution

QCIF,

4/4

Video resolution in pixel

4/4

The period of intra frame in milliseconds

4/4

cbr, constant bitrate

(176x120,ntsc)
(176x144,pal)
CIF,
(352x240,ntsc)
(352x288,pal)
4CIF,
(704x480,ntsc)
(704x576,pal)
s<0~(m-1)>_mpeg4_intraperiod

250, 500, 1000,
2000, 3000,
4000

s<0~(m-1)>_mpeg4_ratecontrolmode

cbr, vbr

vbr, fix quality
s<0~(m-1)>_mpeg4_quant

0~5

4/4

quality of video when choosing vbr in
“ratecontrolmode”.
0 is customized manual input setting.
1 is worst quality and 5 is the best quality.

s<0~(m-1)>_mpeg4_quantlevel

1~31

4/4

The specific quality parameter of the Mpeg4
encoder.
1 = best quality, 31 = worst quality.

s<0~(m-1)>_mpeg4_bitrate

1000~4000000

4/4

Set bit rate in bps when choose cbr in
“ratecontrolmode”

s<0~(m-1)>_mpeg4_maxframe

1~25,

4/4

set maximum frame rate in fps (for MPEG-4)

4/4

quality of jpeg video.

26~30 (only for
NTSC)
s<0~(m-1)>_mjpeg_quant

0~5

0 is customized manual input setting.
1 is worst quality and 5 is the best quality.

User's Manual - 101

VIVOTEK
s<0~(m-1)>_mjpeg_quantlevel

10~200

4/4

The specific quality parameter of the JPEG
encoder.
10 = best quality, 200 = worst quality.

s<0~(m-1)>_mjpeg_maxframe

1~25,

4/4

set maximum frame rate in fps (for JPEG)

26~30
(only for NTSC)

Group: audioin_c<0~(n-1)> for n channel products
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
mute

0, 1

4/4

Enable audio mute.

gain

0~45

4/4

Gain of line input

gain2

0~45

4/4

Gain of external microphone input

s<0~(m-1)>_codectype

aac4, gamr

4/4

Set audio codec type for input.

s<0~(m-1)>_aac4_bitrate

16000,

4/4

Set AAC4 bitrate in bps.

4/4

Set AMR bitrate in bps.

32000,
48000,
64000,
96000,
128000
s<0~(m-1)>_gamr_bitrate

4750,
5150,
5900,
6700,
7400,
7950,
10200,
12200

Group: image_c<0~(n-1)> for n channel products
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
brightness

-5 ~ 5

4/4

Adjust brightness of image according to mode settings.

saturation

-5 ~ 5

4/4

Adjust saturation of image according to mode settings.

contrast

-5 ~ 5

4/4

Adjust contrast of image according to mode settings.

sharpness

-3 ~ 3

4/4

Adjust sharpness of image according to mode settings.

102 - User's Manual

VIVOTEK
Group: timeshift, c for n channel products, m is stream number
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
enable



4/4

Enable time shift streaming.

c<0~(n-1)>_s<0~(m-1)>_allow



4/4

Enable time shift streaming for specific stream.

Group: motion_c<0~(n-1)> for m profile and n channel product
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
enable



4/4

Enable motion detection.

win_i<0~2>_enable



4/4

Enable motion window 1~3.

win_i<0~2>_name

string[14]

4/4

Name of motion window 1~3.

win_i<0~2>_left

0 ~ 320

4/4

Left coordinate of window position.

win_i<0~2>_top

0 ~ 240

4/4

Top coordinate of window position.

win_i<0~2>_width

0 ~ 320

4/4

Width of motion detection window.

win_i<0~2>_height

0 ~ 240

4/4

Height of motion detection window.

win_i<0~2>_objsize

0 ~ 100

4/4

Percent of motion detection window.

win_i<0~2>_sensitivity

0 ~ 100

4/4

Sensitivity of motion detection window.

Group: ddns
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
enable



6/6

Enable or disable the dynamic DNS.

provider

Safe100,

6/6

Safe100 => safe100.net

DyndnsDynamic,

DyndnsDynamic => dyndns.org (dynamic)

DyndnsCustom,

DyndnsCustom => dyndns.org (custom)

TZO,

TZO => tzo.com

DHS,

DHS => dhs.org

DynInterfree,

DynInterfree =>dyn-interfree.it

CustomSafe100

CustomSafe100 =>
Custom server using safe100 method

_hostname

string[128]

6/6

Your dynamic hostname.

_username

string[64]

6/6

Your user or email to login to the DDNS service provider

string[64]

6/6

Your password or key to login to the DDNS service provider.

string[128]

6/6

The server name for safe100.

email
_password
key
_serverna
me

(This field only exists if the provider is customsafe100)

User's Manual - 103

VIVOTEK
Group: upnppresentation
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
enable



6/6

Enable or disable the UPNP presentation service.

Group: upnpportforwarding
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
enable



6/6

Enable or disable the UPNP port forwarding service.

upnpnatstatus

0~3

6/7

The status of UpnP port forwarding, used internally.
0 = OK, 1 = FAIL, 2 = no IGD router, 3 = no need for port
forwarding

Group: syslog
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
enableremotelog



6/6

Enable remote log.

serverip



6/6

Log server IP address.

serverport

514, 1025~65535

6/6

Server port used for log.

level

0~7

6/6

Levels used to distinguish the importance of the
information:
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG

Group: camctrl_c<0~(n-1)> for n channel product
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
panspeed

-5 ~ 5

1/4

Pan speed

tiltspeed

-5 ~ 5

1/4

Tilt speed

zoomspeed

-5 ~ 5

1/4

Zoom speed

autospeed

1~5

1/4

Auto pan speed

focusspeed

-5 ~ 5

1/4

Auto focus speed

axisx

-6790 ~ 6790

1/7

Axis X coordinate, used internally.

104 - User's Manual

VIVOTEK
axisy

-786 ~ 1572

1/7

Axis Y coordinate, used internally.

axisz

4096 ~ 8859

1/7

Axis Z coordinate, used internally.

returnhome

0,1

1/4

Enable/disable auto return home while idle

returnhomeinterval

1 ~ 999

1/4

Wait interval return home

defaulthome

0,1

1/4

This field tells system to use default home position or not.

osdzoom

0,1

1/4

Enable zoom times display

digitalzoom

0,1

1/4

Enable digital zoom

preset_i<0~19>_name

string[40]

1/4

Name of the preset location.

preset_i<0~19>_pan

-6790 ~ 6790

1/4

The axis x coordinate of each preset location

preset_i<0~19>_tilt

-786 ~ 1572

1/4

The axis y coordinate of each preset location

preset_i<0~19>_zoom

4096 ~ 8859

1/4

The axis z coordinate of each preset location

patrol_i<0~39>_name

string[40]

1/4

The name of patrol location

patrol_i<0~39>_

0 ~ 999

1/4

The dwelling time of each patrol location

dwelling

Group: layout
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
logo_default



1/6

0 => Custom logo
1 => Default logo

logo_link

string[40]

1/6

Hyperlink of the logo

logo_powerbyvvtk_hidden



1/6

Hide Powered by VIVOTEK

theme_option

1~4

1/6

1~3: One of the default themes.
4: Custom definition.

theme_color_font

string[7]

1/6

Font color

theme_color_configfont

string[7]

1/6

Font color of configuration area.

theme_color_titlefont

string[7]

1/6

Font color of video title.

theme_color_controlbackground

string[7]

1/6

Background color of control area.

theme_color_configbackground

string[7]

1/6

Background color of configuration area.

theme_color_videobackground

string[7]

1/6

Background color of video area.

theme_color_case

string[7]

1/6

Frame color

Group: capability
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
api_httpversion

0100a

0/7

The HTTP API version.

bootuptime



0/7

Server bootup time.

nir

0,

0/7

Number of IR interfaces.

User's Manual - 105

VIVOTEK

npir

0,

0/7

Number of PIRs.

0/7

Number of digital inputs.

0/7

Number of digital outputs.

0/7

Number of audio inputs.

0/7

Number of audio outputs.


ndi

0,


ndo

0,


naudioin

0,


naudioout

0,


nvideoin



0/7

Number of video inputs.

nmediastream



0/7

Number of media stream per channels.

nvideosetting



0/7

Number of video settings per channel.

naudiosetting



0/7

Number of audio settings per channel.

nuart

0,

0/7

Number of UART interfaces.

0/7

An 32-bit integer, each bit can be set separately as


ptzenabled



follows:
Bit 0 => Support camera control function;
0(not support), 1(support)
Bit 1 => Built-in or external camera;
0(external), 1(built-in)
Bit 2 => Support pan operation, 0(not support),
1(support)
Bit 3 => Support tilt operation; 0(not support),
1(support)
Bit 4 => Support zoom operation;
0(not support), 1(support)
Bit 5 => Support focus operation;
0(not support), 1(support)
Bit 6 => Support iris operation;
0(not support), 1(support)
Bit 7 => External or built-in PT; 0(built-in), 1(external)
Bit 8 => Invalidate bit 1 ~ 7;
0(bit 1 ~ 7 are valid),
1(bit 1 ~ 7 are invalid)
Bit 9 => Reserved bit; Invalidate lens_pan, Lens_tilt,
lens_zoon, lens_focus, len_iris.
0(fields are valid),

106 - User's Manual

VIVOTEK
1(fields are invalid)
lens_pan



0/7

A 32-bit integer, each bit can be set separately as
follows:
Bit 0 => Support pan.
Bit 1 => Support pan in UI.
Bit 2 => External or built-in pan function; 0(built-in),
1(external).

lens_tilt



0/7

A 32-bit integer, each bit can be set separately as
follows:
Bit 0 => Support tilt.
Bit 1 => Support tilt in UI.
Bit 2 => External or built-in tilt function; 0(built-in),
1(external).

lens_zoom



0/7

A 32-bit integer, each bit can be set separately as
follows:
Bit 0 => Support zoom
Bit 1 => Support zoom in UI
Bit 2 => External or built-in zoom function; 0(built-in),
1(external).

lens_focus

0/7


A 32-bit integer, each bit can be set separately as
follows:
Bit 0 => Support focus.
Bit 1 => Support focus in UI.
Bit 2 => External or built-in focus function; 0(built-in),
1(external).
Bit 3 => Support auto focus in UI.

lens_iris



0/7

A 32-bit integer, each bit can be set separately as
follows:
Bit 0 => Support iris.
Bit 1 => Support iris in UI.
Bit 2 => External or build-in iris function; 0(build-in),
1(external).
Bit 3 => Support auto iris in UI.

npreset



0/7

Number of preset locations.

protocol_https

< boolean >

0/7

Indicate whether to support HTTP over SSL.

protocol_rtsp

< boolean >

0/7

Indicate whether to support RTSP.

protocol_sip



0/7

Indicate whether to support SIP.

protocol_maxconnection



0/7

The maximum allowed simultaneous connections.

protocol_maxgenconnect



0/7

The maximum general streaming connections .

ion

User's Manual - 107

VIVOTEK
protocol_maxmegaconne



0/7

The maximum megapixel streaming connections.



0/7

Indicate whether to support scalable multicast.



0/7

Indicate whether to support backchannel multicast.

protocol_rtp_tcp



0/7

Indicate whether to support RTP over TCP.

protocol_rtp_http



0/7

Indicate whether to support RTP over HTTP.

protocol_spush_mjpeg



0/7

Indicate whether to support server push MJPEG.

protocol_snmp



0/7

Indicate whether to support SNMP.

protocol_ipv6



0/7

Indicate whether to support IPv6.

videoin_type

0, 1, 2

0/7

0 => Interlaced CCD

ction
protocol_rtp_multicast_
scalable
protocol_rtp_multicast_
backchannel

1 => Progressive CCD
2 => CMOS
videoin_resolution


videoin_maxframerate



videoin_codec



videoout_codec



0/7

Indicate whether to support acoustic echo cancellation.

audio_extmic



0/7

Indicate whether to support external microphone input.

audio_linein



0/7

Indicate whether to support external line input.

audio_lineout



0/7

Indicate whether to support line output.

audio_headphoneout



0/7

Indicate whether to support headphone output.

audioin_codec



transfer.
camctrl_privilege



0/7

Indicate whether to support “Manage Privilege” of PTZ
control in the Security page.

transmission_mode

Tx,

0/7

Rx,

Indicate transmission mode of the machine: TX =
server, Rx = receiver box, Both = DVR.

Both
network_wire



0/7

Indicate whether to support Ethernet.

network_wireless



0/7

Indicate whether to support wireless.

wireless_802dot11b



0/7

Indicate whether to support wireless 802.11b+.

wireless_802dot11g



0/7

Indicate whether to support wireless 802.11g.

wireless_beginchannel

1 ~ 14

0/7

Indicate the begin channel of wireless network

wireless_endchannel

1 ~ 14

0/7

Indicate the end channel of wireless network

wireless_encrypt_wep



0/7

Indicate whether to support wireless WEP.

wireless_encrypt_wpa



0/7

Indicate whether to support wireless WPA.

wireless_encrypt_wpa2



0/7

Indicate whether to support wireless WPA2.

derivative_brand



0/7

Indicate whether to support the upgrade function for the
derivative brand. For example, if the value is true, the
VVTK product can be upgraded to VVXX.
(TCVV<->TCXX is excepted)

evctrlchannel



0/7

Indicate whether to support HTTP tunnel for
event/control transfer.

joystick



0/7

Indicate whether to support joystick control.

Group: event_customtaskfile_i<0~2>
PARAMETER

VALUE

SECURITY

DESCRIPTION

(get/set)
name

string[41]

6/6

Custom script identification of this entry.

date

string[17]

6/6

Date of custom script.

time

string[17]

6/6

Time of custom script.

Group: event_i<0~2>
PARAMETER

VALUE

SECURITY

DESCRIPTION

(get/set)
name

string[40]

6/6

Identification of this entry.

User's Manual - 109

VIVOTEK
enable

0, 1

6/6

Enable or disable this event.

priority

0, 1, 2

6/6

Indicate the priority of this event:
“0” = low priority
“1” = normal priority
“2” = high priority

delay

1~999

6/6

Delay in seconds before detecting the next event.

trigger

boot,

6/6

Indicate the trigger condition:

di,

“boot” = System boot

motion,

“di”= Digital input

seq,

“motion” = Video motion detection

recnotify,

“seq” = Periodic condition
“recnotify” = Recording notification.

di



6/6

Indicate which DI detects.
This field is required when trigger condition is “di”.
One bit represents one digital input. The LSB indicates DI 0.

mdwin



6/6

Indicate which motion detection windows detect.
This field is required when trigger condition is “md”.
One bit represents one window.
The LSB indicates the 1st window.
For example, to detect the 1st and 3rd windows, set mdwin as 5.

inter

1~999

6/6

Interval of snapshots in minutes.
This field is used when trigger condition is “seq”.

weekday



6/6

Indicate which weekday is scheduled.
One bit represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on Friday and Sunday, set
weekday as 66.

begintime

hh:mm

6/6

Begin time of the weekly schedule.

endtime

hh:mm

6/6

End time of the weekly schedule.
(00:00 ~ 24:00 sets schedule as always on)

action_do_i<0~(ndo-1)>_e 0, 1

6/6

Enable or disable trigger digital output.

6/6

Duration of the digital output trigger in seconds.

nable
action_do_i<0~(ndo-1)>_d 1~999
uration

110 - User's Manual

VIVOTEK
action_goto_enable

0,1

6/6

Enable/disable ptz goto preset on event triggered.

action_goto_name

string[40]

6/6

Preset name that ptz goto on event triggered.

6/6

Enable or disable this server action.

action_server_i<0~4>_ena 0, 1
ble

The default value is 0.

action_server_i<0~4>_me NULL, 0~4

6/6

Index of the attached media.

6/6

Enable this to create folders by date, time, and hour

dia
action_server_i<0~4>_dat 
efolder

automatically.

Group: server_i<0~4>
PARAMETER

VALUE

SECURITY

DESCRIPTION

(get/set)
name

string[40]

6/6

Identification of this entry

type

email,

6/6

Indicate the server type:

ftp,

“email” = email server

http,

“ftp” = FTP server

ns

“http” = HTTP server
“ns” = network storage

http_url

string[128]

6/6

URL of the HTTP server to upload.

http_username

string[64]

6/6

Username to log in to the server.

http_passwd

string[64]

6/6

Password of the user.

ftp_address

string[128]

6/6

FTP server address.

ftp_username

string[64]

6/6

Username to log in to the server.

ftp_passwd

string[64]

6/6

Password of the user.

ftp_port

0~65535

6/6

Port to connect to the server.

ftp_location

string[128]

6/6

Location to upload or store the media.

ftp_passive

0, 1

6/6

Enable or disable passive mode.
0 = disable passive mode
1 = enable passive mode

email_address

string[128]

6/6

Email server address.

email_sslmode

0, 1

6/6

Enable support SSL.

email_port

0~65535

6/6

Port to connect to the server.

email_username

string[64]

6/6

Username to log in to the server.

email_passwd

string[64]

6/6

Password of the user.

email_senderemail

string[128]

6/6

Email address of the sender.

email_recipientemail

string[128]

6/6

Email address of the recipient.

ns_location

string[128]

6/6

Location to upload or store the media.

ns_username

string[64]

6/6

Username to log in to the server.

ns_passwd

string[64]

6/6

Password of the user.

ns_workgroup

string[64]

6/6

Workgroup for network storage.

User's Manual - 111

VIVOTEK
Group: media_i<0~4> (media_freespace is used internally.)
PARAMETER

VALUE

SECURITY

DESCRIPTION

(get/set)
name

string[40]

6/6

Identification of this entry

type

snapshot,

6/6

Media type to send to the server or store on the server.

6/6

Indicate the source of media stream.

systemlog,
videoclip,
recordmsg
snapshot_source



0 means the first stream.
1 means the second stream and etc.
snapshot_prefix

string[16]

6/6

Indicate the prefix of the filename.

snapshot_datesuffix

0, 1

6/6

Add date and time suffix to filename:
1 = Add date and time suffix.
0 = Do not add.

snapshot_preevent

0~7

6/6

Indicates the number of pre-event images.

snapshot_postevent

0~7

6/6

The number of post-event images.

videoclip_source



6/6

Indicate the source of media stream.
0 means the first stream.
1 means the second stream and etc.

videoclip_prefix

string[16]

6/6

Indicate the prefix of the filename.

videoclip_preevent

0~9

6/6

Indicates the time for pre-event recording in seconds.

videoclip_maxduration

1 ~ 10

6/6

Maximum duration of one video clip in seconds.

videoclip_maxsize

50 ~ 1500

6/6

Maximum size of one video clip file in Kbytes.

VALUE

SECURITY

DESCRIPTION

Group: recording_i<0~1>
PARAMETER

(get/set)
name

string[40]

6/6

Identification of this entry.

enable

0, 1

6/6

Enable or disable this recording.

priority

0, 1, 2

6/6

Indicate the priority of this recording:
“0” indicates low priority.
“1” indicates normal priority.
“2” indicates high priority.

source



6/6

Indicate the source of media stream.
0 means the first stream.
1 means the second stream and etc.

limitsize

0,1

6/6

0: Entire free space mechanism
1: Limit recording size mechanism

112 - User's Manual

VIVOTEK
cyclic

0,1

6/6

0: Disable cyclic recording
1: Enable cyclic recording

notify

0,1

6/6

0: Disable recording notification
1: Enable recording notification

notifyserver

0~31

6/6

Indicate which notification server is scheduled.
One bit represents one application server (server_i0~i4).
bit0 (LSB) = server_i0.
bit1 = server_i1.
bit2 = server_i2.
bit3 = server_i3.
bit4 = server_i4.
For example, enable server_i0, server_i2, and server_i4
as notification servers; the notifyserver value is 21.

weekday



6/6

Indicate which weekday is scheduled.
One bit represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on Friday and Sunday, set
weekday as 66.

begintime

hh:mm

6/6

Start time of the weekly schedule.

endtime

hh:mm

6/6

End time of the weekly schedule.
(00:00~24:00 indicates schedule always on)

prefix

string[16]

6/6

Indicate the prefix of the filename.

cyclesize

20~

6/6

The maximum size for cycle recording in Kbytes when
choosing to limit recording size.

reserveamount

15~

6/6

The reserved amount in Mbytes when choosing cyclic
recording mechanism.

dest

cf,

6/6

0~4

The destination to store the recorded data.
“0~4” means the index of the network storage.

Group: path
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
encoder1_start



7/7

Specify the HTTP push server is active for stream 1

encoder2_start



7/7

Specify the HTTP push server is active for stream 2

User's Manual - 113

VIVOTEK
Group: https
NAME

VALUE

SECURITY

DESCRIPTION

(get/set)
connect

1025 ~ 65535

7/7

Specify the stunnel connect port.

enable



6/6

To enable or disable secure HTTP.

policy



6/6

If the value is 1, it will force HTTP connection redirect to
HTTPS connection

method

auto,

status

6/6

auto => Create self-signed certificate automatically.

manual,

manual => Create self-signed certificate manually.

install

install => Create certificate request and install.

-2 ~ 1

6/6

Specify the https status.
-2= Invalid public key
-1 = Waiting for certificate
0 = Not installed
1= Active

countryname

string[2]

6/6

Country name in the certificate information.

stateorprovincename

string[128]

6/6

State or province name in the certificate information.

localityname

string[128]

6/6

The locality name in the certificate information.

organizationname

string[64]

6/6

Organization name in the certificate information.

unit

string[32]

6/6

Organizational unit name in the certificate information.

commonname

string[64]

6/6

Common name in the certificate information.

validdays

0 ~ 9999

6/6

Valid period for the certification.

Drive the digital output
Note: This request requires Viewer privileges.
Method: GET/POST

Syntax:
http:///cgi-bin/dido/setdo.cgi?do1=[&do2=]
[&do3=][&do4=][&return=]

Where state is 0 or 1; “0” means inactive or normal state, while “1” means active or triggered state.

PARAMETER

VALUE

DESCRIPTION

do

0, 1

0 – Inactive, normal state
1 – Active, triggered state

114 - User's Manual

VIVOTEK
return



Redirect to the page  after the parameter is assigned. The
 can be a full URL path or relative path according to the
current path. If you omit this parameter, it will redirect to an empty page.

Example: Drive the digital output 1 to triggered state and redirect to an empty page.
http://myserver/cgi-bin/dido/setdo.cgi?do1=1

Query Status of the Digital Input
Note: This request requires Viewer privileges.
Method: GET/POST

Syntax:
http:///cgi-bin/dido/getdi.cgi?[di0][&di1][&di2][&di3]

If no parameter is specified, all of the digital input statuses will be returned.

Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: \r\n
\r\n
[di0=]\r\n
[di1=]\r\n
[di2=]\r\n
[di3=]\r\n
where  can be 0 or 1.

Example: Query the status of digital input 1 .
Request:
http://myserver/cgi-bin/dido/getdi.cgi?di1

Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: 7\r\n
\r\n
di1=1\r\n

User's Manual - 115

VIVOTEK

Query Status of the Digital Output
Note: This request requires Viewer privileges.
Method: GET/POST

Syntax:
http:///cgi-bin/dido/getdo.cgi?[do0][&do1][&do2][&do3]

If no parameter is specified, all the digital output statuses will be returned.

Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: \r\n
\r\n
[do0=]\r\n
[do1=]\r\n
[do2=]\r\n
[do3=]\r\n
where  can be 0 or 1.

Example: Query the status of digital output 1.
Request:
http://myserver/cgi-bin/dido/getdo.cgi?do1

Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: 7\r\n
\r\n
do1=1\r\n

Capture Single Snapshot
Note: This request requires Normal User privileges.
Method: GET/POST

Syntax:

116 - User's Manual

VIVOTEK
http:///cgi-bin/viewer/video.jpg?[channel=][&resolution=]
[&quality=]

If the user requests a size larger than all stream settings on the server, this request will fail.
PARAMETER

VALUE

DEFAULT

DESCRIPTION

channel

0~(n-1)

0

The channel number of the video source.

resolution


quality

1~5

The server will return the most up-to-date snapshot of the selected channel and stream in JPEG format. The size and
quality of the image will be set according to the video settings on the server.

Return:
HTTP/1.0 200 OK\r\n
Content-Type: image/jpeg\r\n
[Content-Length: \r\n]



Account Management
Note: This request requires Administrator privileges.
Method: GET/POST

Syntax:
http:///cgi-bin/admin/editaccount.cgi?
method=&username=[&userpass=][&privilege=]
[&privilege=][…][&return=]

PARAMETER

VALUE

DESCRIPTION

method

Add

Add an account to the server. When using this method, the “username”
field is necessary. It will use the default value of other fields if not
specified.

Delete

Remove an account from the server. When using this method, the
“username” field is necessary, and others are ignored.

edit

Modify the account password and privilege. When using this method, the
“username” field is necessary, and other fields are optional. If not
specified, it will keep the original settings.

User's Manual - 117

VIVOTEK
username



The name of the user to add, delete, or edit.

userpass



The password of the new user to add or that of the old user to modify.
The default value is an empty string.

privilege

return



The privilege of the user to add or to modify.

viewer

Viewer privilege.

operator

Operator privilege.

admin

Administrator privilege.



Redirect to the page  after the parameter is assigned. The
 can be a full URL path or relative path according to the
current path. If you omit this parameter, it will redirect to an empty page.

System Logs
Note: This request require Administrator privileges.
Method: GET/POST

Syntax:
http:///cgi-bin/admin/syslog.cgi

Server will return the most up-to-date system log.

Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: \r\n
\r\n
\r\n

Upgrade Firmware
Note: This request requires Administrator privileges.
Method: POST

Syntax:
http:///cgi-bin/admin/upgrade.cgi

Post data:
fimage=[&return=]\r\n

118 - User's Manual

VIVOTEK
\r\n


Server will accept the file named  to upgrade the firmware and return with  if indicated.

Camera Control
Note: This request requires Viewer privileges.
Method: GET/POST

Syntax:
http:///cgi-bin/camctrl/camctrl.cgi?[channel=][&camid=]｛ [&move=] or
[&focus=] or [&iris=] or [&speedpan=] or [&speedtilt=] or [&speedzoom=] or
[&speedapp=]

or [&auto=] or [&zoom=] or [&zooming=] or

[&vx=&vy=&vs=] ｝[&return=]

PARAMETER

VALUE

DESCRIPTION

channel

<0~(n-1)>

Channel of video source.

camid

0,

Camera ID.

move

home

Move to camera to home position.

up

Move camera up.

down

Move camera down.

left

Move camera left.

right

Move camera right.

speedpan

-5 ~ 5

Set the pan speed.

speedtilt

-5 ~ 5

Set the tilt speed.

speedzoom

-5 ~ 5

Set the zoom speed.

speedapp

1~5

Set the auto pan/patrol speed.

auto

pan

Auto pan.

patrol

Auto patrol.

stop

Stop camera.

wide

Zoom larger view with current speed.

tele

Zoom further with current speed.

stop

Stop zoom.

wide

Zoom without stopping for larger view with current speed.

tele

Zoom without stopping for further view with current speed.

vx



The slope of movement = vy/vx, used for joystick control.

vy



zoom

zooming

User's Manual - 119

VIVOTEK
vs

0~7

Set the speed of movement, “0” means stop.

focus

auto

Auto focus.

far

Focus on further distance.

near

Focus on closer distance.

auto

Let the Network Camera control iris size.

open

Manually control the iris for bigger size.

close

Manually control the iris for smaller size.

define

Set current position as home position

default

Using default home position

calibrate

go

Recalibrate the home position to the default center

return



Redirect to the page  after the parameter is assigned. The

iris

sethome

 can be a full URL path or relative path according to the
current path. If you omit this parameter, it will redirect to an empty page.

Recall
Note: This request requires Viewer privileges.
Method: GET

Syntax:
http:///cgi-bin/camctrl/recall.cgi?
recall=[&channel=][&return=]

PARAMETER VALUE

DESCRIPTION

recall

Text string less than 30 characters One of the present positions to recall.

channel

<0~(n-1)>

Channel of the video source.

return



Redirect to the page  after the parameter is assigned. The
 can be a full URL path or relative path according to the
current path. If you omit this parameter, it will redirect to an empty page.

Preset Locations
Note: This request requires Operator privileges.
Method: GET/POST

Syntax:
http:///cgi-bin/operator/preset.cgi?[channel=]

120 - User's Manual

VIVOTEK
[&addpos=][&delpos=][&return=]

PARAMETER

VALUE

DESCRIPTION

addpos


channel

<0~(n-1)>

Channel of the video source.

delpos


return



Redirect to the page  after the parameter is assigned. The
 can be a full URL path or relative path according to the
current path. If you omit this parameter, it will redirect to an empty page.

System Information
Note: This request requires Normal User privileges.
Method: GET/POST

Syntax:
http:///cgi-bin/sysinfo.cgi

Server will return the system information. In HTTP API version 2, the CapVersion will be 0200. All fields in the previous
version (0100) are obsolete. Please use “getparam.cgi?capability” instead.

Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: \r\n
\r\n
Model=\r\n
CapVersion=0200\r\n

PARAMETER(supported capability VALUE

DESCRIPTION

version)
Model

system.firmwareversion

Model name of the server.
Ex:IP3133-VVTK-0100a

CapVersion

MMmm, MM is major version from 00 ~ 99

Capability field version.

mm is minor version from 00 ~ 99

ex: 0100

User's Manual - 121

VIVOTEK

IP Filtering
Note: This request requires Administrator access privileges.
Method: GET/POST

Syntax:
http:///cgi-bin/admin/ipfilter.cgi?
method=&[start=&end=][&index=]
[&return=]

PARAMETER VALUE

DESCRIPTION

Method

Add allowed IP address range to the server. Start and end parameters must be specified. If

addallow

the index parameter is specified, it will try to add starting from the index position.
adddeny

Add denied IP address range to the server. Start and end parameters must be specified. If
the index parameter is specified, it will try to add starting from the index position.

deleteallow

Remove allowed IP address range from server. If start and end parameters are specified, it
will try to remove the matched IP address. If index is specified, it will try to remove the
address from given index position. [start, end] parameters have higher priority then the
[index] parameter.

deletedeny

Remove denied IP address range from server. If start and end parameters are specified, it
will try to remove the matched IP address. If index is specified, it will try to remove the
address from given index position. [start, end] parameters have higher priority then the
[index] parameter.

start



The starting IP address to add or to delete.

end



The ending IP address to add or to delete.

index



The start position to add or to delete.

return

 Redirect to the page  after the parameter is assigned. The  can
be a full URL path or relative path according to the current path. If you omit this parameter,
it will redirect to an empty page.

Get SDP of Streams
Note: This request requires Viewer access privileges.
Method: GET/POST

Syntax:
http:///_accessname>

122 - User's Manual

VIVOTEK

“m” is the stream number.
“network_accessname_<0~(m-1)>” is the accessname for stream “1” to stream “m”. Please refer to the “subgroup of
network: rtsp” for setting the accessname of SDP.
You can get the SDP by HTTP GET.

Open the Network Stream
Note: This request requires Viewer access privileges.

Syntax:
For HTTP push server (MJPEG):
http:///_accessname>

For RTSP (MP4), the user needs to input the URL below into an RTSP compatible player.
rtsp:///_accessname>

“m” is the stream number.
For details on streaming protocol, please refer to the “control signaling” and “data format” documents.

User's Manual - 123

VIVOTEK

Specifications
Models

．PZ7111 (NTSC CCD, PoE)
．PZ7121 (PAL CCD, PoE)
．PZ7112 (NTSC CCD, WLAN)
．PZ7122 (PAL CCD, WLAN)

System

．CPU: Bach SoC
．Flash: 8MB
．RAM: 64MB + 32MB
．Embedded OS: Linux 2.6

Pan/Tilt/Zoom

．Pan range: 300° (-150° ~ +150°)
．Tilt range: 135° (-45° ~ +90°)
．10x optical zoom, 10x digital zoom
．Auto pan mode
．Auto patrol mode

LED Indicator

．System power and status indicator
．System activity and network link indicator

Power

．12V DC
．Power consumption: Max. 12 W
(PZ7111/7121)
．Power consumption: Max. 13 W
(PZ7112/7122)
．802.3af compliant Power-over-Ethernet
(PZ7111/PZ7121)

Approvals

．CE, LVD, FCC, VCCI, C-Tick

Operating Environments

．Temperature: 0 ~ 50 °C (32 ~ 122 °F)
．Humidity: 20% ~ 80% RH

Viewing System
Requirements

．OS: Microsoft Windows 2000/XP/Vista
．Browser: Mozilla Firefox, Internet Explorer
6.x or above
．Cell phone: 3GPP player
．Real Player: 10.5 or above
．Quick Time: 6.5 or above

Lens

．10x optical zoom lens, f = 4.2 ~ 42 mm, F1.8 (wide),
F2.9 (tele), auto-iris, auto focus

Angle of View

．4.9° ~ 46° (horizontal)
．3.6° ~ 35° (vertical)

Shutter Time

．1/60 sec. to 1/10,000 sec. (PZ7111/PZ7112)
．1/50 sec. to 1/10,000 sec. (PZ7121/PZ7122)

Image Sensor

．1/4” CCD sensor in D1 resolution

Installation, Management,
and Maintenance

Minimum
Illumination

．Installation Wizard 2
．16-CH recording software
．Supports firmware upgrade

．1.5 Lux / F1.8 (typical)
．0.05 Lux / F1.8 (low light mode)

Applications

Video

．SDK available for application development
and system integration

．Compression: MJPEG & MPEG-4
．Streaming:
Simultaneous dual streams
MPEG-4 streaming over UDP, TCP, HTTP or HTTPS
MPEG-4 multicast streaming
MJPEG streaming over HTTP or HTTPS
．Supports 3GPP mobile surveillance
．Frame rates:
MPEG-4: Up to 30/25 fps at 704x480/704x576
MJPEG: Up to 30/25 fps at 704x480/704x576
．Interface:
AV output

Warranty

．24 months

Image Settings

Audio

Networking

．Adjustable image size, quality and bit rate
．Time stamp and text caption overlay
．Flip & mirror
．Configurable brightness, contrast, saturation,
sharpness and white balance
．ATW/AWB, AES/ALC
．BLC (Backlight Compensation)
．Compression:
GSM-AMR speech encoding, bit rate:
4.75 kbps to 12.2 kbps
MPEG-4 AAC audio encoding, bit rate:
16 kbps to 128 kbps
．Interface:
Built-in microphone
External microphone input
Audio output
External/Internal microphone switch
．Supports two-way audio via SIP protocol
．Supports audio mute
．10/100 Mbps Ethernet, RJ-45
．Built-in 802.11b/g WLAN (PZ7112/PZ7122)
．Protocols: IPv4, TCP/IP, HTTP, HTTPS, UPnP, RTSP/
RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS,
DDNS and PPPoE

Pan/Tilt Range

。
90

。
150

。
150
。
45

Pan:300°

External View

Users

．Live viewing for up to 10 clients

Dimension

．Ø 105 mm x 120 mm

Weight

．Net: 391 g (PZ7111/PZ7121)
．Net: 408 g (PZ7112/PZ7122)

Antenna
(PZ7112/7122 only)

Power Cord
Socket

External/Internal
MIC Switch

Ethernet 10/100
RJ45 Socket

AV Out

Accessories

．Event notification using HTTP, SMTP or FTP
．Local recording of MP4 files

．Multi-level user access with password protection
．IP address filtering
．Wireless: WEP, WPA-PSK, WPA2 (PZ7112/PZ7122)
．HTTPS encrypted data transmission

General I/O
Terminal Block

MIC In

．Triple-window video for motion detection
Alarm and
Event Management ．One D/I and one D/O for external sensor and alarm

Security

Tilt:135°

Enclosure

Mounting Kit

All specifications are subject to change without notice. Copyright c 2009 VIVOTEK INC. All rights reserved.

Distributed by:

124 - User's Manual

6F, No.192, Lien-Cheng Rd., Chung-Ho, Taipei County, Taiwan
Tel: +886 2 8245 5282| Fax: +886 2 8245 5532| E-mail: sales@vivotek.com
VIVOTEK USA, INC.
470 Lakeside Drive Suite C, Sunnyvale, CA 94085 USA
Tel: 408-773-8686 | Fax: 408-773-8298 | E-mail: salesusa@vivotek.com

P/N: 011001601 Ver 2�1

Technical Specifications

VIVOTEK

Technology License Notice
MPEG-4 AAC Technology
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 AAC AUDIO PATENT LICENSE. THIS PRODUCT MAY
NOT BE DECOMPILED, REVERSE-ENGINEERED OR COPIED, EXCEPT WITH REGARD TO PC SOFTWARE,
OF WHICH YOU MAY MAKE SINGLE COPIES FOR ARCHIVAL PURPOSES. FOR MORE INFORMATION,
PLEASE REFER TO HTTP://WWW.VIALICENSING.COM.

MPEG-4 Visual Technology
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE
WITH THE MPEG-4 VISUAL STANDARD ("MPEG-4 VIDEO") AND/OR (ii) DECODING MPEG-4 VIDEO THAT
WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/
OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY
BE OBTAINED FROM MPEG LA, LLC. PLEASE REFER TO HTTP://WWW.MPEGLA.COM.

AMR-NB Standard
THIS PRODUCT IS LICENSED UNDER THE AMR-NB STANDARD PATENT LICENSE AGREEMENT. WITH
RESPECT TO THE USE OF THIS PRODUCT, THE FOLLOWING LICENSORS’ PATENTS MAY APPLY:
TELEFONAKIEBOLAGET ERICSSON AB: US PAT. 6192335; 6275798; 6029125; 6424938; 6058359. NOKIA
CORPORATION: US PAT. 5946651; 6199035. VOICEAGE CORPORATION: AT PAT. 0516621; BE PAT. 0516621;
CA PAT. 2010830; CH PAT. 0516621; DE PAT. 0516621; DK PAT. 0516621; ES PAT. 0516621; FR PAT. 0516621;
GB PAT. 0516621; GR PAT. 0516621; IT PAT. 0516621; LI PAT. 0516621; LU PAT. 0516621; NL PAT. 0516621;
SE PAT 0516621; US PAT 5444816; AT PAT. 819303/AT E 198805T1; AU PAT. 697256; BE PAT. 819303; BR PAT.
9604838-7; CA PAT. 2216315; CH PAT. 819303; CN PAT. ZL96193827.7; DE PAT. 819303/DE69611607T2; DK
PAT. 819303; ES PAT. 819303; EP PAT. 819303; FR PAT. 819303; GB PAT. 819303; IT PAT. 819303; JP PAT. APP.
8-529817; NL PAT. 819303; SE PAT. 819303; US PAT. 5664053. THE LIST MAY BE UPDATED FROM TIME TO
TIME BY LICENSORS AND A CURRENT VERSION OF WHICH IS AVAILABLE ON LICENSOR’S WEBSITE AT
HTTP://WWW.VOICEAGE.COM.

User's Manual - 125

VIVOTEK

Electromagnetic Compatibility (EMC)
FCC Statement
This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions.
■ This device may not cause harmful interference, and
■ This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a partial
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
■ Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cables must be used in order to comply with emission limits.

CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in which
case the user may be required to take adequate measures.
This device (PZ7112/PZ7122) complies with the essential requirements of the R&TTE Directive 1999/5/
EC. The following test methods have been applied in order to prove presumption of conformity with the
essential requirements of the R&TTE Directive 1999/5/EC.
This device (PZ7112/PZ7122) is a 2.4 GHz wideband transmission system (transceiver), intended for use
in all EU member states and EFTA countries, except in France and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain
authorization to use the device for setting up outdoor radio links and/or for supplying public access to
telecommunications and/or network services.
This device (PZ7112/PZ7122) may not be used for setting up outdoor radio links in France and in some
areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz.
For detailed information the end-user should contact the national spectrum authority in France.

Liability
VIVOTEK Inc. cannot be held responsible for any technical or typographical errors and reserves the right
to make changes to the product and manuals without prior notice. VIVOTEK Inc. makes no warranty
of any kind with regard to the material contained within this document, including, but not limited to, the
implied warranties of merchantability and fitness for any particular purpose.

126 - User's Manual



File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:42
Instance ID                     : uuid:55c78873-f975-4c30-9bed-633f5f964ea0
Document ID                     : adobe:docid:indd:3a9bdbe2-5be9-11de-a5c9-b04ce8cffb3b
Rendition Class                 : proof:pdf
Derived From Instance ID        : 3a9bdbe1-5be9-11de-a5c9-b04ce8cffb3b
Derived From Document ID        : adobe:docid:indd:a91cd3fc-53d6-11de-a778-cfa9c7010649
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:07ea07f3-fdd9-4544-9d24-7cf185982f85, uuid:021a39e0-a204-4bd0-8050-99ea2450609a, uuid:a093b9e4-5da3-4e21-b754-ca7c9ba7baf1, uuid:31990642-03cd-456a-9f85-0a76613633e6, uuid:321c75a1-4e0c-4670-8fb9-291017cf4a5f, uuid:781699cf-fe61-410c-b4aa-5727e0d1c564, uuid:b7167144-e25d-4d2e-9c82-d0ea55687077, uuid:b35425a3-4537-4122-9300-b9d59e7c1a27, uuid:8be23390-e946-4403-9fc2-e4b1798df25e, uuid:bf7be1f8-8569-40de-bc7a-9f13b462fb2c, uuid:071ddfc9-20ba-45c7-8b65-64c970b013da, uuid:31990642-03cd-456a-9f85-0a76613633e6, uuid:b5b7c3b6-6918-4039-af28-ad0072ebded2, uuid:67cf3775-9807-4653-aaad-f7c841463726, uuid:256d8231-3a54-48f1-ab4d-6e8171080632, uuid:26b90b98-3ad5-4a0e-aa0d-e0084dce9f0c, uuid:d48adaf5-137e-46c0-87fe-8dd9a17bd570, uuid:0dc19fa0-e165-4f8c-8758-9c0dcb557558, uuid:ef3ef54f-2301-48d0-a16c-d0eeff94954d, uuid:2f71c691-92c0-4739-ac02-07174b12c6a2, uuid:9f4fba31-73cd-479b-9929-edda464cd646, uuid:9c6898e8-920b-4cb5-b481-c5e8863c6841, uuid:34f0694c-930c-4dc5-99ac-da504e6b1855, uuid:c9237623-6baa-40e8-9e8a-92ee5292d2ab, uuid:63b72165-6dfd-4de8-b54c-3e58b99380a4, uuid:34f0694c-930c-4dc5-99ac-da504e6b1855, uuid:1a6e1b91-77d6-417c-9ee6-5e194d26bb8c, uuid:cb392184-aeab-41ef-bef8-b72239cda43d, uuid:a190f711-bd43-4e32-97d4-8b5770fc89ad, uuid:a190f711-bd43-4e32-97d4-8b5770fc89ad, uuid:d7632cbf-e366-402b-83fa-0d6ef102c6e3, uuid:8f9e6457-f677-4314-8703-6c2cdc77874d, uuid:ac0ad8f4-4c1e-4e4e-8c88-ee45d9024bd1, uuid:6c091922-4a97-4317-8a10-84d1728a7aba, uuid:7a48ca2c-4f36-4eda-a853-64e7046190df, uuid:b25da146-dfc2-4fa2-9958-a8660bd75a6d, uuid:62ead719-e0e4-4382-8c49-df6497194a67, uuid:937cb138-6ecd-4a4b-b9a9-b78a0a9df359, uuid:5d4e2087-d02d-4b1c-ba91-6d0aa0a28245, uuid:4c6550a9-f967-4a69-a90e-4c4f1b638d18, uuid:87544984-623e-44ab-b95e-8c24650eb76b, uuid:91ed66c7-8035-424f-b642-d37e30822b21, uuid:30eb4c8e-c563-4c4e-b966-bb15208602f2, uuid:d821865b-23b0-44c5-9afd-c6b6b1847318, uuid:c320f2bc-40c1-4124-a472-c2e36d510441, uuid:3ff319c7-09fd-4655-af3f-88ab65f18705, uuid:08abab6d-3f6b-47d0-bd6d-4afcade575f3, uuid:535d5661-c3c6-4e80-82b2-07db419b6b55, uuid:34f0694c-930c-4dc5-99ac-da504e6b1855, uuid:c9237623-6baa-40e8-9e8a-92ee5292d2ab, uuid:35b0305e-b678-481d-a54c-a3dd79e6c80e, uuid:9b9a98e9-5544-4df2-9f67-2c6235803ef8, uuid:5030a9ea-b9d0-46fa-834c-f3c2001327d3, uuid:a6a84a4d-2577-445a-9b17-0c0d5b666ee5, uuid:ecbc3e90-bc3f-4b45-b55d-a800be31ecc4, uuid:8c9e6b31-c4d1-49bc-b5d5-cc8b9cd50509, uuid:896d9a8e-e9c9-4a89-998b-a160b19a4c8c, uuid:6a0df5a9-23f7-4371-8b03-45be14a40680, uuid:425441be-41fd-46c3-83b7-4560da5c9eb3, uuid:ae2ea39e-4a8f-48a2-b5e1-572dfaca8899, uuid:a4d1d019-08a1-4691-9b6e-48b5de1d9b67, uuid:32db733e-3238-45d3-bf37-d1b66b02c44f, uuid:245a3463-cb2b-427c-ba06-4a315b97a595, uuid:cab216d6-756b-4b6d-93c6-9f273527a0c4, uuid:7a7af18b-179a-454b-95a9-5eb477ef43a7, uuid:95ec0606-a78b-4861-8222-8f8904993648, uuid:3a307afd-3dc3-4aaf-8b50-36a03308d1be, uuid:abab7fe8-0db2-4835-8dca-061b72eaaf0f, uuid:2af87d75-00dd-4f18-9ffb-f4e3eee69007, uuid:69c2dafb-331f-4a2e-ad50-fb49fd9b9042, uuid:a08bd4a2-5dc3-4267-b153-a67bbe6aa0e6, uuid:5a96580d-0a04-4431-8268-9d1029da2198, uuid:52b997bd-1269-4932-bfa0-fcee3471714f, uuid:2cefe33a-b29c-4fae-ad92-42bb6eed1fe6, uuid:0837a560-a048-46de-ae8e-b12953e26f6b, uuid:2cefe33a-b29c-4fae-ad92-42bb6eed1fe6, uuid:80261075-cc83-4b84-b109-526da13b33ca, uuid:7796a77b-31cc-42e0-81f1-fc26ad03d923, uuid:878a9ee6-4950-41b3-bcd6-3ca5365baa8b, uuid:6454aaf9-7473-40c3-98a9-17e149e45c51, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:9ef7bb79-b2f9-4ebd-9efe-f560c7cb578a, uuid:f470ad4b-3537-47e4-b351-12ebcfd06bf4, uuid:adf9be1b-ea5d-490b-a45a-3dac3c51f260
Manifest Reference Document ID  : uuid:33A6FF0A9D8EDD11A090AD347A78C0EA, uuid:7321A3A09E54DD11ABFED11C62375963, uuid:7521A3A09E54DD11ABFED11C62375963, uuid:768DA33DDADADC118592C823B8A3AFE7, uuid:679E23F623C4DC11AD11BD7569FE9135, uuid:387AEE6C9983DD1198A0FC6AEDB85F79, uuid:42BE998818B9DC11A28CA1D131D770D5, uuid:3C7AEE6C9983DD1198A0FC6AEDB85F79, uuid:F6BB845517C0DD11B9369B95C1537B7B, uuid:629E23F623C4DC11AD11BD7569FE9135, uuid:186D126CC52DDC1196C7B4CCFC100025, uuid:768DA33DDADADC118592C823B8A3AFE7, uuid:7721A3A09E54DD11ABFED11C62375963, uuid:82F3F2B9E22DDC1196C7B4CCFC100025, uuid:2C201098A60ADD11AF60B2F5A21A0E59, uuid:D7859CD18425DD11A8A0DF76B09964C7, uuid:6C06E62BCAC4DC11BE52E5374C0C2335, uuid:7D13433EFE34DC119EA5E189A3AC9896, uuid:8D99C36F6F52DD118E7CFBEB125D0227, uuid:31201098A60ADD11AF60B2F5A21A0E59, uuid:2A201098A60ADD11AF60B2F5A21A0E59, uuid:89D146BABD0ADD11AF60B2F5A21A0E59, uuid:C28E29B12215DD11ADE1E77C9DCFA310, uuid:8BD146BABD0ADD11AF60B2F5A21A0E59, uuid:8DD146BABD0ADD11AF60B2F5A21A0E59, uuid:C28E29B12215DD11ADE1E77C9DCFA310, uuid:8799C36F6F52DD118E7CFBEB125D0227, uuid:702B8B820553DD118E7CFBEB125D0227, uuid:08FC8F7EED56DD11B5DFE7D619F18DA7, uuid:08FC8F7EED56DD11B5DFE7D619F18DA7, uuid:FFF40D85D40ADD11AF60B2F5A21A0E59, uuid:6F6F62A31FBFDC11A60BD1EA3532DB48, uuid:10FC8F7EED56DD11B5DFE7D619F18DA7, uuid:C946A4519957DD11BD58AB5B9850C5F2, uuid:55BD4C515259DD11941DFBB9E48FDB99, uuid:5ABD4C515259DD11941DFBB9E48FDB99, uuid:D6BC7A1D610BDD11BA7FADA6B6BF3876, uuid:CB1B145D850BDD11BA7FADA6B6BF3876, uuid:4BDB90CCFD59DD11941DFBB9E48FDB99, uuid:D11B145D850BDD11BA7FADA6B6BF3876, uuid:CF1B145D850BDD11BA7FADA6B6BF3876, uuid:CD1B145D850BDD11BA7FADA6B6BF3876, uuid:B044A0895FB0DD1197A09BE692AF4176, uuid:F9C5064991B0DD1197A09BE692AF4176, uuid:54252860910BDD11BA7FADA6B6BF3876, uuid:56252860910BDD11BA7FADA6B6BF3876, uuid:99FCE5E50045DE119C5B9719E4AB16D3, uuid:5A252860910BDD11BA7FADA6B6BF3876, uuid:C28E29B12215DD11ADE1E77C9DCFA310, uuid:8BD146BABD0ADD11AF60B2F5A21A0E59, uuid:7E32F7A96C58DD11941DFBB9E48FDB99, uuid:8032F7A96C58DD11941DFBB9E48FDB99, uuid:FFC5064991B0DD1197A09BE692AF4176, uuid:BE61778ACC56DC119D94AEC773E1D117, uuid:624945B51545DE119C5B9719E4AB16D3, uuid:A789B116355ADD11903FA784513F4736, uuid:654945B51545DE119C5B9719E4AB16D3, uuid:F9402F482690DD11A090AD347A78C0EA, uuid:10E2C5E0260CDD11A9E4E232D2FB95A3, uuid:8532F7A96C58DD11941DFBB9E48FDB99, uuid:716ED3D79CC4DC11BE52E5374C0C2335, uuid:266B22019ABEDC11A60BD1EA3532DB48, uuid:F2BB845517C0DD11B9369B95C1537B7B, uuid:544CAE72EE90DD11A346E2DCC8C2A7C7, uuid:504CAE72EE90DD11A346E2DCC8C2A7C7, uuid:35295696DD5BDE11A06DB68FA1BD7C78, uuid:1CDDA6CFC30EDE11A5A9CB5000E957C8, uuid:4D9CB5D0215DDD11882DCE11A13082F2, uuid:0D431861BFC4DC11BE52E5374C0C2335, uuid:23DDA6CFC30EDE11A5A9CB5000E957C8, uuid:2F6B22019ABEDC11A60BD1EA3532DB48, uuid:D431D622610CDD11BA7AE6F84C996734, uuid:E9825110CE0EDE11A5A9CB5000E957C8, uuid:0E7974F3C2B6DD11AA21FBB18B929C5D, uuid:EE825110CE0EDE11A5A9CB5000E957C8, uuid:0E7974F3C2B6DD11AA21FBB18B929C5D, uuid:D831D622610CDD11BA7AE6F84C996734, uuid:DA31D622610CDD11BA7AE6F84C996734, uuid:74308359CA3EDE1197D3B743BC4DE4C5, uuid:F1825110CE0EDE11A5A9CB5000E957C8, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:f9817e9e-2d32-4ac2-869c-e3674bdc23d9, uuid:32dc38b0-6919-4fe7-81fe-16cf9d0caa50, uuid:D526A58B688BDC1191DFC552F20B20AF
Create Date                     : 2009:06:19 19:39:14+08:00
Modify Date                     : 2009:06:19 19:40:30+08:00
Metadata Date                   : 2009:06:19 19:40:30+08:00
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 9519 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 126
Creator                         : Adobe InDesign CS3 (5.0.4)