Von Duprin 22 Series Catalog 106588
User Manual: Von Duprin 22 Series Catalog Literature
Open the PDF directly: View PDF 
.
Page Count: 24
| Download | |
| Open PDF In Browser | View PDF |
22 Series Exit device Introduction Exit devices are a critical part of the Fire and Life Safety egress system and will provide safe and reliable service when properly applied and maintained. Von Duprin designs and manufactures exit devices in accordance to ISO 9001 Quality Management System and meets or exceeds accepted U.S. domestic and International standards. All 22 Series exit devices are UL listed for Panic Hardware or Fire Hardware, and are certified to ANSI A156.3, Grade 1. Consult your local consultant or the Von Duprin factory for current listings. It is intended that the information included in this publication, when properly used, will provide clear and reliable guidelines to the proper general selection and application. However, the scope of the information is necessarily limited. VON DUPRIN Administrative offices 2720 Tobey Dr. Indianapolis, IN 46219 2 • Von Duprin 22 Series Customer service 877-671-7011 800-999-0328 - Fax Technical support 877-671-7011 Table of contents Exit hardware Rim devices 22 8 22 Trim 9 Surface mounted Vertical rod devices 2227 12 2227 Trim 13 Fire hardware Rim devices 22-F 10 22-F Trim 11 Surface mounted Vertical rod devices 2227-F 14 2227-F Trim 15 Von Duprin 22 Series • 3 Options and accessories Applications & trim operation Double door applications Door handing Outside trim operation Lever styles Electrical accessories ALK – Alarm kit LX – Latch bolt monitoring RX – Request to exit RX2 – Double request to exit CON – Allegion Connect Trim selection Optional trim Lever designs Operation options Mechanical options LBR – Less bottom rod LD – Less dogging PL – Pullman latch AX – Accessible device Strike options/ Stile information Strikes Stiles Device accessories Cover plate kit Cylinders EPT – Electrical power transfer GBK – Glass bead kit PS902 – Alarm kit power supply Rod and latch guards Additional information ANSI Function, grade & type Device, latch and rod dimensions UL fire labeling and opening size How-to-order information Popular double door applications Nomenclature Finishes Standard finishes Symbols Indicates fire rated application Indicates ADA products C o n t i n u i n g c o m m i t m e n t t o q u a l i t y. 4 • Von Duprin 22 Series Nomenclature – how to order LD LX LXLC RX RXLC RX2 AX Less dogging Latchbolt monitor switch Latchbolt monitor switch, low current Request to exit Request to exit, low current Double request to exit Accessible device RX 22 27 L F SP28 RHR 06 ALK 3' 22 22 Series None Rim device 27 Surface mounted vertical rod device DT EO K K-BE L L-BE NL NL-OP TP TP-BE Dummy trim Exit only Knob (Classroom) Knob - blank escutcheon Lever (Classroom) (L-NL not available) Lever - blank escutcheon (Passage) Night latch (Key retracts latchbolt) Night latch cylinder assembly, optional pull Thumbpiece Thumbpiece - blank escutcheon (Passage) None Panic exit device F Fire exit device Finishes SP28, SP313 LHR Left hand reverse RHR Right hand reverse XX 06 (Standard) 03 17 LBR SNB ALK GBK CYL PL SEC Less bottom rod Sexbolts Alarm kit Glass bead kit Cylinder Pullman latch Security screws Optional trim Optional strike CON Allegion Connect Door width 3' (Standard), advise if different Only available up to 48" Door height 7' (Standard), advise if different Door thickness 1¾" (Standard), up to 2 ¹⁄4" Door/frame material HM Hollow metal (standard) WD Wood (standard) AL Aluminum Device ctr. Line See specifications, advise if different than standard Door applicaion SGL Single (standard for rim) PR Pair (standard for surface vertical) DE Double egress (surface vertical) Door listing 3 Hour 1¹⁄2 Hour 1 Hour 45 Minute 20 Minute Von Duprin 22 Series • 5 Popular double door applications Double door applications Auxiliary fire pin Two rim devices with mullion—same direction, panic or fire device Door handing Left Hand-Reverse Orientation Left hand Two vertical rods—double egress, panic or fire device (LBR-F device can be used on double-egress) Two surface mounted vertical rod devices—same direction (do not use with overlapping astragal) Two FEH verticle rods with auxilary fire pin-LBR option (Don’t use overlapping astragal on pair swinging same direction) Right Hand-Reverse Orientation Right hand reverse orientation reverse orientation LHR RHR LHR (Left hand reverse) RHR (Right hand reverse) (Left hand reverse) (Right hand reverse) Outside Outside Outside trim operation Standard trim Lever trim operation Features n Bi directional lever rotation n Field reversible handing Standard operation Key locks and unlocks lever. 6 • Von Duprin 22 Series Blank escutcheon Lever always active. BE suffix, e.g., 230L-BE. Lever styles Standard levers 03 Knurling available 06 Default lever Knurling available 17 Knurling available Von Duprin 22 Series • 7 22 Rim exit device 22 Rim exit device for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3, 2008 Grade 1. Covers stock hollow metal doors with 161* cutouts. Fits door stiles as narrow as 3 13/16" (97 mm). The device is non-handed. The 299 Strike ships standard, optional strikes available Hex key dogging comes standard on 22 Rim exit device Finishes – SP28 & SP313. *Not applicable with all strike and mullion combinations, consult factory. AX 22 Rim exit device Specifications Device functions Ships ready for all functions, EO, DT, NL, TP, K, L Device lengths 3' (914 mm) see minimum door opening chart at bottom of page 4' (1219 mm) see minimum door opening chart at bottom of page Device centerline from finished floor 39 13/16" (1011 mm) 39 11/16" (1008 mm) with mullion Center case dimensions 4 1/4" (108 mm) x 1 3/8" (41 mm) x 2 3/8" (60 mm) Mechanism case dimensions 2" (51 mm) x 3 3/4" (95 mm) Projection push bar Push bar neutral - 3 3/4" (95 mm) push bar depressed - 3" (76 mm) Latch bolt Deadlocking, 3/4" (19 mm) throw Fasteners & sex bolts (SNB) Includes 1 3/4" (44 mm) and 2 1/4" (57 mm) wood & metal doors optional SNB available for device Electric options LX latchbolt monitor switch RX pushpad monitor switch RX2 double pushpad monitor switch ALK alarm exit kit CON Allegion Connect Mechanical options GBK glass bead kit AX accessible device Dogging feature Hex key dogging standard Dogging options LD less dogging Strikes 299 – Dull black RX Double pushpad monitor switch • Uses two RX switches ALK Stop height Strike Single door Double door w/mullion Minimum door opening for 3' device* Minimum door opening w/ALK* / 2" 299 Yes — 26.500" (673mm) 33.250" (845mm) / 2" 1439 Yes — 25.687" (652mm) 32.437" (824mm) / 2" 299 — 4754/4854/4954 27.000" (686mm) 33.750" (857mm) / 2" 299 — 5654 25.812" (656mm) 32.562"(827mm) / 2" 1408 — 5754 25.750" (679mm) 32.500" (826mm) / 2" 1606 — 1654 26.562" (675mm) 33.312" (846mm) 5 /8" 299 Yes — 26.750" (679mm) 33.500"(851mm) 5 /8" 1439 Yes — 25.937" (659mm) 32.687" (830mm) 5 /8" 299 — 4754/4854/4954 27.125" (689mm) 33.875" (860mm) 5 /8" 299 — 5654 26.687" (678mm) 33.437" (849mm) 5 /8" 1408 — 5754 25.875" (657mm) 32.625" (829mm) 5 /8" 1606 — 1654 26.687" (678mm) 33.437" (849mm) 1 1 1 1 1 *For 4' device, add 6" (152mm) 8 • Von Duprin 22 Series Pushpad monitor switch • Signals use of an opening • SPDT switch to monitor pushpad RX2 Minimum door opening chart 1 Accessible device • UL certified to meet new 5 lb. maximum operating force requirement • Exceeds ANSI/ BHMA requirements Alarm exit kit • Unauthorized opening triggers 85-decibel horn • Set in armed or disarmed mode by key LX Latchbolt monitor switch • Signals use of opening • SPDT Switch to monitor latchbolt CON Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply Standard trim Product description Trim description Escutcheon plate size EO DT NL NL-OP No outside trim Exit only Dummy trim Pull when dogged Night latch Key retracts latchbolt Night latch Key retracts latchbolt optional pull required 22EO 22DT 22NL 22NL-OP — 210DT* 210NL* 110NL-MD* 110NL-WD* — 5 3/8" x 4 25/32" x 3/32" (137 x 121 x 2 mm) 5 3/8" x 4 25/32" x 3/32" (137 x 121 x 2 mm) — Pull center to center — — — — Projection — 1 31/32" (42 mm) 1 31/32" (42 mm) — 01 02 03 03 — — Rim Rim Handing — — — — 230EO 230DT 230NL — 6 (with no trim) 2 (with EO trim) 2 2 6 TP K L Thumbpiece Key Locks & Unlocks Knob Key Locks & Unlocks Lever Key Locks & Unlocks Product description 22TP 22K 22L Trim description 230TP* Escutcheon plate size 3" x 12 /16" x /32" (76 x 306 x 2 mm) 3" x 4 /32" x /32" (76 x 121 x 2 mm) 3" x 6 3/8" x 15/16" (76 x 162 x 24 mm) Pull center to center 5 1/2" (140 mm) — — Projection 2" (51 mm) 2 /16" (75 mm) 2 5/8" (67 mm) Optional trim Optional #425 sex bolt quantity for device 22 Rim exit device ANSI function Cylinder type *ANSI/BHMA A156.3 (2001) Grade 1 trim 1 210K 3 230L* 25 15 3 ANSI function 05 08 08 Cylinder type 1 1/4" Mortise Furnished 1 1/4" Mortise Handing — — — 230TP-BE 210K-BE 230L-BE 2 2 2 Optional trim Optional #425 sex bolt quantity for device C o n t i n u i n g c o m m i t m e n t t o q u a l i t y. *ANSI/BHMA A156.3 (2008) Grade 1 trim Von Duprin 22 Series • 9 22-F Rim fire exit device The 299F Strike ships standard, optional strikes available 22-F Rim fire exit devices for all types of single doors up to 4' x 8' (1219 mm x 2438 mm) or 8' x 8' (2438 mm x 2438 mm) double doors with 9954 or 9854 mullion, UL listed for Fire Exit Hardware. Devices are ANSI A156.3 – 2008 Grade 1. Fits door stiles as narrow as 4 3/8" (111 mm). The device is non-handed. Finishes – SP28 & SP313. 499F Strike with 9854/9954 Mullion AX Specifications 22-F Rim fire exit device Device functions Device lengths Device centerline from finished floor Center case dimensions Mechanism case dimensions Projection push bar Latch bolt Fasteners & Sex bolts (SNB) Electric options Ships ready for all functions, EO, DT, NL, TP, K, L 3' (914 mm) see minimum door opening chart at bottom of page 4' (1219 mm) see minimum door opening chart at bottom of page 39 13/16" (1011 mm) 39 11/16" (1008 mm) with mullion 4 1/4" (108 mm) x 1 3/8" (41 mm) x 2 3/8" (60 mm) 2" (51 mm) x 3 3/4" (95 mm) RX Push bar neutral - 3 3/4" (95 mm) Push bar depressed - 3" (76 mm) Deadlocking, 3/4" (19mm) throw Dogging feature Includes 13/4" (44 mm) and 2 1/4" (57 mm) wood & metal doors Optional SNB available for device (see next page for quantities) LX latchbolt monitor switch RX pushpad monitor switch RX2 double pushpad monitor switch ALK alarm exit kit CON Allegion Connect GBK glass bead kit AX accessible device No mechanical dogging Strikes 299F, 499F for mullions – Dull black Mechanical options Minimum door opening chart /2" 299F/499F Yes — 1 /2" 299F/499F — KR/9854/9954 27.000" (686 mm) 33.750" (857 mm) / 8" 5 / 8" 299F/499F 299F/499F Yes — — KR/9854/9954 26.750" (679 mm) 27.125" (689 mm) 33.500" (851mm) 33.875" (860 mm) Strike Single door Double door w/mullion 1 5 *For 4' device, add 6" (152 mm) Pushpad monitor switch • Signals use of an opening • SPDT switch to monitor pushpad RX2 Double pushpad monitor switch • Uses two RX switches ALK Alarm exit kit • Unauthorized opening triggers 85-decibel horn • Set in armed or disarmed mode by key Minimum door opening for 3' device* 26.500" (673 mm) Stop height Accessible device • UL certified to meet new 5 lb. maximum operating force requirement • Exceeds ANSI/ BHMA requirements Minimum door opening w/ALK* 33.250" (845 mm) CON Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply LX Latchbolt monitor switch • Signals use of opening • SPDT Switch to monitor latchbolt 10 • Von Duprin 22 Series Standard trim EO NL NL-OP Night latch Key retracts latchbolt Night latch Key retracts latchbolt optional pull required 22EO-F 22NL-F 22NL-OP-F — 210NL** 110NL-MD** 110NL-WD** — 5 3/8" x 4 25/32" x 3/32" (137 x 121 x 2 mm) — Pull center to center — — — Projection — 1 31/32" (42 mm) — ANSI function 01 03 03 Cylinder type — Rim Rim Handing — — — 230EO 230NL — *Optional #425 sex bolt 6 (with no trim) quantity for device 2 (with EO trim) 2 6 *Additional 425 SNB for 499F strike 2 2 K L Product description Trim description Escutcheon plate size Optional trim 2 22-F Rim fire exit device No outside trim Exit only *Sex Bolts are required for wood fire doors **ANSI/BHMA A156.3 (2008) Grade 1 trim TP Thumbpiece Key Locks & Unlocks Knob Key Locks & Unlocks Lever Key Locks & Unlocks Product description 22TP-F 22K-F 22L-F Trim description 230TP** 210K 230L** Escutcheon plate size 3" x 12 1/16" x 3/32" (76 x 306 x 2 mm) 3" x 4 25/32" x 3/32" (76 x 121 x 2 mm) 3" x 6 3/8" x 15/16" (76 x 162 x 24 mm) Pull center to center 5 1/2" (140 mm) — — Projection 2" (51 mm) 2 15/16" (75 mm) 2 5/8" (67 mm) ANSI function 05 08 08 Cylinder type 1 1/4" Mortise Furnished 1 1/4" Mortise Handing — — — 230TP-BE 210K-BE 230L-BE *Optional #425 sex bolt 2 quantity for device 2 2 *Additional 425 SNB for 499F strike 2 2 Optional trim 2 C o n t i n u i n g c o m m i t m e n t t o q u a l i t y. *Sex Bolts are required for wood fire doors **ANSI/BHMA A156.3 (2008) Grade 1 trim Von Duprin 22 Series • 11 2227 Surface mounted vertical rod device Top latch 299 Top strike 2227 Surface mounted vertical rod exit device for all types of single and double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2008 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. Fits door stiles as narrow as 3 5/8" (92 mm). The device is non-handed. Finishes – SP28 & SP313. 2227 Surface mounted vertical rod device 248L4 Bottom strike for use with flat threshold 304L Bottom strike Specifications Device functions Ships ready for all functions, EO, DT, NL, TP, K, L Device lengths 3' (914 mm) see minimum door opening chart at bottom of page 4' (1219 mm) see minimum door opening chart at bottom of page Door height 7' (2134 mm) standard door height extension rods available for door heights up to 10' (3048mm) 12" (205 mm), door height 36" (914 mm), door height Device centerline from finished floor 39 /16" (1011 mm) Center case dimensions 4 1/4" (108 mm) x 1 3/8" (41 mm) x 2 3/8" (60 mm) Mechanism case dimensions Projection push bar 2" (51 mm) x 3 3/4" (95 mm) Door undercut 1 Push bar neutral - 3 3/4" (95 mm) Push bar depressed - 3" (76 mm) /4" (7 mm) from finished floor recommended , /4" (19mm) maximum or 1/8" (3mm) from threshold Latch bolt Deadlocking anti-friction top and bottom bolt, 5/8" (16 mm) throw Fasteners & sex bolts (SNB) Includes 1 3/4" (44 mm) and 2 1/4" (57 mm) wood & metal doors. Optional SNB available for device. Electric options LX latchbolt monitor switch RX pushpad monitor switch RX2 double pushpad monitor switch ALK alarm exit kit CON Allegion Connect Dogging feature Hex key dogging standard Dogging options LD less dogging Strikes 299 – Dull black Bottom 248L-4 and 304L – unfinished Double pushpad monitor switch • Uses two RX switches ALK Alarm exit kit • Unauthorized opening triggers 85-decibel horn • Set in armed or disarmed mode by key Stop height Strike Single door Double door w/mullion Minimum door opening for 3' device* Minimum door opening w/ALK* / 2" N/A Yes Vert. x Vert. 25.875" (657 mm) 32.625" (829 mm) /8" N/A Yes Vert. x Vert. 26.000" (664 mm) 32.750" (832 mm) 5 *For 4' device, add 6" (152 mm) 12 • Von Duprin 22 Series Pushpad monitor switch • Signals use of an opening • SPDT switch to monitor pushpad RX2 Minimum door opening chart 1 LX RX 3 PL pullman latch GBK glass bead kit RG rod guards LG latch guards Hex key dogging comes standard on 2227 Surface mounted vertical rod device Latchbolt monitor switch • Signals use of opening • SPDT Switch to monitor latchbolt 13 Mechanical options Bottom latch CON Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply Standard trim Product description Trim description Escutcheon plate size EO DT NL NL-OP No outside trim Exit only Dummy trim Pull when dogged Night latch Key retracts latchbolt Night latch Key retracts latchbolt optional pull required 2227EO 2227DT 2227NL 2227NL-OP — 210DT* 210NL* 110NL-MD* 110NL-WD* — 5 3/8" x 4 25/32" x 3/32" (137 x 121 x 2 mm) 5 3/8" x 4 25/32" x 3/32" (137 x 121 x 2 mm) — — — — — — 1 31/32" (42 mm) 1 31/32" (42 mm) — ANSI function 01 02 03 03 Cylinder type — — Rim Rim Handing — — — — 230EO 230DT 230NL — 6 (with no trim) 2 (with EO trim) 2 2 6 TP K L Thumbpiece Key Locks & Unlocks Knob Key Locks & Unlocks Lever Key Locks & Unlocks Product description 2227TP 2227K 2227L Trim description 230TP* Escutcheon plate size 3" x 12 /16" x /32" (76 x 306 x 2 mm) 3" x 4 /32" x /32" (76 x 121 x 2 mm) 3" x 6 3/8" x 15/16" (76 x 162 x 24 mm) Pull center to center 5 1/2" (140 mm) — — Projection 2" (51 mm) 2 /16" (75 mm) 2 5/8" (67 mm) Optional trim Optional #425 sex bolt quantity for device 2227 Surface mounted vertical rod device Pull center to center Projection *ANSI/BHMA A156.3 (2008) Grade 1 trim 1 210K 3 230L* 25 15 3 ANSI function 05 08 08 Cylinder type 1 1/4" Mortise Furnished 1 1/4" Mortise Handing — — — 230TP-BE 210K-BE 230L-BE 2 2 2 Optional trim Optional #425 sex bolt quantity for device C o n t i n u i n g c o m m i t m e n t t o q u a l i t y. *ANSI/BHMA A156.3 (2008) Grade 1 trim Von Duprin 22 Series • 13 2227-F Surface mounted vertical rod fire exit device Top latch 299F Top strike 2227-F Surface mounted vertical rod fire exit device for pairs of doors up to 8' x 10' (2438 mm x 3048 mm), UL listed for Fire Exit Hardware. Devices are ANSI A156.3 – 2008 Grade 1. Fits door stiles as narrow as 3 5/8" (92 mm). See opposite page for available outside trim and device functions. The device is non-handed. 304L Bottom strike 2227-F Surface mounted vertical rod fire exit device Finishes – SP28 & SP313. Bottom latch Specifications RX Device functions Ships ready for all functions, EO, DT, NL, TP, K, L Device lengths 3' (914 mm) see minimum door opening chart at bottom of page 4' (1219 mm) see minimum door opening chart at bottom of page Door height 7' (2134 mm) standard door height extension rods available for door heights up to 10' (3048mm) 12" (205 mm), door height 36" (914 mm), door height Device centerline from finished floor 39 13/16" (1011 mm) Center case dimensions 4 1/4" (108 mm) x 1 3/8" (41 mm) x 2 3/8" (60 mm) Mechanism case dimensions Projection push bar 2" (51 mm) x 3 3/4" (95 mm) Door undercut 1 ALK /4" (7 mm) from finished floor recommended Latch bolt Deadlocking anti-friction top and bottom bolt, /8" (16 mm) throw Fasteners & sex bolts (SNB) Includes 1 3/4" (44 mm) and 2 1/4" (57 mm) wood & metal doors. Optional SNB available for device. Electric options LX latchbolt monitor switch RX pushpad monitor switch RX2 double pushpad monitor switch ALK alarm exit kit CON Allegion Connect 5 PL pullman latch GBK glass bead kit RG rod guards LG latch guards Dogging feature No mechanical dogging Strikes Top 299F – (499F LBR) – Dull black Bottom 304L – Unfinished Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply LX Stop height Strike Single door Double door w/mullion Minimum door opening for 3' device* Minimum door opening w/ALK* / 2" N/A Yes Vert. x Vert. 25.875" (657 mm) 32.625" (829 mm) /8" N/A Yes Vert. x Vert. 26.000" (664 mm) 32.750" (832 mm) 5 *For 4' device, add 6" (152 mm) 14 • Von Duprin 22 Series Alarm exit kit • Unauthorized opening triggers 85-decibel horn • Set in armed or disarmed mode by key CON Minimum door opening chart 1 RX2 Double pushpad monitor switch • Uses two RX switches Push bar neutral - 3 3/4" (95 mm) Push bar depressed - 3" (76 mm) Mechanical options Pushpad monitor switch • Signals use of an opening • SPDT switch to monitor pushpad Latchbolt monitor switch • Signals use of opening • SPDT Switch to monitor latchbolt Standard trim EO NL-OP No outside trim Exit only Night latch Key retracts latchbolt Night latch Key retracts latchbolt optional pull required 2227EO-F 2227NL-F 2227NL-OP-F — 210NL** 110NL-MD** 110NL-WD** — 5 3/8" x 4 25/32" x 3/32" (137 x 121 x 2 mm) — Pull center to center — — — Projection — 1 31/32" (42 mm) — ANSI function 01 03 03 Cylinder type — Rim Rim Handing — — — 230EO 230NL — *Optional #425 sex bolt quantity for device 6 (with no trim) 2 (with EO trim) 2 6 *Additional 425 SNB for 499F strike 2 2 2 K L Product description Trim description Escutcheon plate size Optional trim 2227 Surface mounted vertical rod fire exit device NL *Sex Bolts are required for wood fire doors **ANSI/BHMA A156.3 (2008) Grade 1 trim TP Thumbpiece Key locks & unlocks Knob Key locks & unlocks Lever Key locks & unlocks Product description 2227TP-F 2227K-F 2227L-F Trim description 230TP** Escutcheon plate size 3" x 12 /16" x /32" (76 x 306 x 2 mm) 3" x 4 /32" x /32" (76 x 121 x 2 mm) 3" x 6 3/8" x 15/16" (76 x 162 x 24 mm) Pull center to center 5 1/2" (140 mm) — — Projection 2" (51 mm) 2 /16" (75 mm) 2 5/8" (67 mm) ANSI function 05 08 08 Cylinder type 1 1/4" Mortise Furnished 1 1/4" Mortise Handing — — — 230TP-BE 210K-BE 230L-BE *Optional #425 sex bolt quantity for device 2 2 2 *Additional 425 SNB for 499F strike 2 2 2 Optional trim 1 210K 3 C o n t i n u i n g c o m m i t m e n t t o q u a l i t y. 230L** 25 15 3 *Sex Bolts are required for wood fire doors **ANSI/BHMA A156.3 (2008) Grade 1 trim Von Duprin 22 Series • 15 22 Optional trim 210 Series trim The 210DT and 210NL have a heavy 10 gauge (2.4mm) stainless steel escutcheon. Rim Cylinder must be ordered separately for the 210NL trim. The 210K knob trim has a 10 gauge (2.4mm) steel escutcheon and uses the Schlage “A” orbit knob with six pin “C” keyway. 110NL Cylinder kit Cylinder kit is available MD for metal doors or WD for wood doors. Metal door application supplied standard if door material is not specified. When ordering with device, specify function NL-OP. Rim Cylinder must be ordered separately. 230 Series trim The 230EO, 230DT, 230NL and 230TP have a heavy 10 gauge (2.4mm) steel escutcheon. The 230L has a cast zinc 3/4" (19mm) depth escutcheon. #06 lever style furnished standard, #03 and #17 optional style levers are available. 230L furnished RHR if handing is not specified. Cylinder must be ordered separately for the 230NL, 230TP and 230L trims. 22 Optional trim EO NL DT C o n t i n u i n g c o m m i t m e n t t o q u a l i t y. TP-BE L-BE Thumbpiece blank escutcheon always operable, no cylinder Lever blank escutcheon always operable, no cylinder Knob blank escutcheon always operable, no cylinder 230TP-BE** 230L-BE** 210K-BE C o n t i n u i n g c o m m i t m e n t t o q u a l i t y. Exit only plate Dummy trim pull when dogged Night latch key retracts latch bolt 230NL** K-BE C o n t i n u i n g c o m m i t m e n t t o q u a l i t y. Trim description 230EO 230DT** Escutcheon plate size 3" x 12 1/16" x 3/32" (76 x 306 x 2 mm) 3" x 12 1/16" x 3/32" 3" x 12 1/16" x 3/32" 3" x 12 1/16" x 3/32" 3" x 6 3/8" x 15/16" 3" x 4 25/32" x 3/32" (76 x 306 x 2 mm) (76 x 306 x 2 mm) (76 x 306 x 2 mm) (76 x 162 x 24 mm) (76 x 121 x 2 mm) Pull center to center — 5 1/2" (140 mm) 5 1/2" (140 mm) 5 1/2" (140 mm) — — Projection — 2" (51 mm) 2" (51 mm) 2" (51 mm) 2 5/8" (67 mm) 2 15/16" (75 mm) ANSI function 01 02 03 — — — — Rim — — Cylinder type *Optional #425 sex bolt quantity for device 2 2 6 — 2 2 *Additional 425 SNB for 499F strike 2 2 2 2 2 2 *Sex Bolts are required for wood fire doors **ANSI/BHMA A156.3 (2008) Grade 1 Trim 16 • Von Duprin 22 Series 22 Strike/Stile information Strikes for rim devices 264 299 299F 499F Projection 9/16" (14 mm) Projection 13/16" (21 mm) Projection 13/16" (21 mm) Projection 1408 1410–Integral Stop 1439–Blade Stop*** 1606 Used with 5754 Mullion One per pair of doors 1 Projection /2" (13 mm) Projection 1/2" (13 mm) Projection 3/8" (10 mm) 15 /16" (24 mm) 1609** Strike options / Dogging options (Not fire rated; requires coordinates) Strikes for vertical rod devices 248L-4 260U-Flush transom only 304L 385A Projection 3/8" (10 mm) Projection 3/8" (10 mm) Mortise 13/16" (21 mm) Mortise 2 1/12" (64 mm) Strikes 264, 299, 299F and 499F also available for vertical rod devices. Device type Standard single door Strike 22 299 Standard double door Stile 4 3/4" (121 mm) Application* 299 x 4954 OPTIONAL single door Stile 4 3/4" (121 mm) OPTIONAL double door Strike Stile Application* Stile 1439 3 3/16" (97 mm) 299 w/5654 4 1/4" (108 mm) 1410 3 /16" (97 mm) 1408 w/5754 3 3/16" (97 mm) 1606 3 /16" (100 mm) 1606 w/1654 4 1/4" (108 mm) — — 1609 w/vertical rod** 43 1/8" (111 mm) — — — 3 15 22-F 299F 4 3/8" (111 mm) 499F x 9954 4 7/8" (124 mm) — 2227 Latch Retraction 299 (Top) 299 (Middle) 304L/284-L (Bottom) 3 5/8" (92 mm) Two Vertical Rods 3 5/8" (92 mm) 260U Top 385A Bottom 3 5/8" (92 mm) Two Vertical Rods 3 5/8" (92 mm) 2227 Pullman Latch 299 (Top) 284-L (Bottom) 3 5/8" (92 mm) Two Vertical Rods 3 5/8" (92 mm) 260U Top 3 5/8" (92 mm) Two Vertical Rods 3 5/8" (92 mm) 2227-F 299 (Top) 304L (Bottom) 3 5/8" (92 mm) Two Vertical Rods 3 5/8" (92 mm) 260U-SS 4" 4" 4" *Mullion information, refer to General and Auxiliary Catalog. **Not for UL Fire exit hardware. Must be used with a coordinator. ***Replaces 1409 Strike Note: On a Rim/Vertical rod application for a pair of doors, the 1609 strike extends off the edge of the door into the opening. Von Duprin 22 Series • 17 22 Electrical options Power supplies PS902 Overview: The PS902 is an AC power supply that provides 24 VDC power to operate the ALK alarm kit. The unit will power up to 6 alarm kits. Note: PS902-BB provides power in case of an AC power failure. EPT Electrical power transfer Electric Power Transfer provides a means of transferring electrical power from a door frame to the edge of a swinging door. The units are completely concealed when the door is in the closed position, and are ideal for installations involving abuse or heavy traffic. Two models are available; EPT-2, two 18 gauge wires and EPT-10, ten 24 gauge wires. Door applications: up to 5" butt hinges – 180˚ swing, 5 ½" butt hinges – 130˚ swing, 6" butt hinges – 110˚ swing, 3 /4" butt offset pivots 180˚ swing. Swing clear hinge – 90° max. swing Finishes to order, specify: SP28 (sprayed aluminum) 1. EPT-2 or EPT-10. SP313 (sprayed duranodic). 2. Finish, SP28 or SP313. 22 Electrical options Dimensions 1818• Von Duprin 22 Series Housing 9" x 1 1/4" x 1 5/8" (229mm x 32mm x 38 mm) EPT-2 Two 18 gauge wires, Up to 2 AMPS @ 24 VDC with a 16 amp maximum surge EPT-10 Ten 24 gauge wires, up to 1 amp @ 24 VDC with a 16 amp maximum surge 22 Electrical options RX Request to exit The RX (Request to exit) feature is used to signal the use of an opening. This device is equipped with one internal SPDT switch which monitors the pushpad. The device can be connected to a security console, or may be used as a single door alarm when used with a horn and power supply. The RX switch option should not be used to control a load, but as a signalling switch (0.5 amps. resisitive maximum). The RX switch is available in a low current (LC) switch. Most commonly used in computer operated monitoring systems. To order, specify: • Standard – Use prefix RX, example RX22EO • Low Current – Use prefix RX-LC, example RX-LC22EO RX2 Double request to exit The RX2 feature uses two RX switches. To order, specify: Standard – Use prefix RX2, example RX22EO LX Latchbolt monitoring The ALK battery alarm kit is a simple yet effective way to deter unauthorized use of an opening. While the exit device is still a means of egress, the ALK kit contains an internal horn. When the touch bar is depressed, the horn sounds to provide an audible means of signaling that the opening has been violated. The alarm kit can be armed or disarmed by key. The horn is rated at 85 decibel. For hardware applications The assembly includes both a 24VDC Input and External Inhibit standard. The External Inhibit provides remote arming and dis-arming. The key switch uses a standard 1 1/4" (32mm) mortise cylinder with a straight cam (Schlage 20-001, B502-191 cam). The unit operates on one standard 9-volt alkaline battery. When the battery is weak, the horn will emit an intermittent low battery alert signal. The alarm can automaticaly re-arm with a 1.5, 3 or 4.5 minute time delay upon request. Alarm kits are available with a choice of two switch kits, RX or LX. RX monitors the touchpad and is furnished standard. LX optional latch bolt monitoring is recommended for use with surface vertical rod exit devices or when alarm needs to sound from both the exit device and trim side of the door. Specify ALK-LX. The ALK includes a 6" x 20" decal for application on door “EMERGENCY EXIT ONLY. ALARM WILL SOUND. To order, specify: 1. Standard, ALK 2. If AR desired, specify AR 1.5, 3 or 4.5 The LX feature is used to signal the use of an opening. This device is equipped with one internal SPDT switch which monitors the latch bolt. Minimum door opening sizes on ALK applications Refer to device pages 8, 10, 12, and 14. The device can be connected to a security console, or may be used as a single door alarm when used with a horn and power supply. 22 Electrical options • ALK Alarm kit The LX switch option should not be used to control a load, but as a signalling switch (0.5 amps. resistive maximum). The LX switch is available in a low current (LC) switch. Most commonly used in computer operated monitoring systems. To order, specify: • Standard – use prefix LX, example LX22EO • Low Current – use prefix LX-LC, example LX-LC22EO Electrical rating for all switches: • • Standard – up to 0.5 Amp @ 24VDC Maximum Low Current (LC) - up to 0.5 Amp @ 24VDC Maximum Note: All switches can be either factory or field installed Von Duprin 22 Series • 19 19 22 Electrical options Allegion Connect Harness length ] Allegion’s cross-category Connect features common interconnect components to our electrified options. Allegion Connect is a quick and easy way to connect power sources; all the way from your power supply to locking device. There is no wire cutting; reducing installation and maintenance time ultimately cutting cost. After installation, Allegion’s Connect continues to provide benefits throughout the lifetime of the opening by offering a service kit for repairs or modifications in the future. Features and benefits • Quick: common connections reducing installation time 22 Electrical options • Perfect Connections: these factory installed connectors ensure the right wires match up every time 6 Inches 12 Inches 26 Inches 32 Inches 38 Inches 44 Inches 50 Inches 192 Inches Connectors on both ends CON-6 CON-12 CON-26 CON-32 CON-38 CON-44 CON-50 CON-192 Connectors on one end, crimped pins on the other end CON-6P CON-12P CON-26P CON-32P CON-38P CON-44P CON-50P CON-192P Power Supply Wire Harness = Connectors on one end, stripped leads on the other end, offering a direct connection to the power supply 6 Inches CON-6W - wire extension to power supply Consult door manufacturer for harness length requirements. Note: You will need to purchase a separate wiring harness to go from exit device to hinge/ EPT and an additional harness to go from hinge/EPT to power supply or access control system. Harness part numbers with ordering information can be located in the Schlage, Von Duprin and Falcon pricebooks. A service kit is available for order in the Schlage, Von Duprin and Falcon pricebooks. Included in this kit are male end plugs, female end plugs and pins to customize harnesses to your application. Note: Must be ordered with exit devices and locks How to order • Protective: the connectors protect the connection points throughout the installation process and lifetime of the opening 1. Specify CON for Connect electronic options Example: RX-22-EO-CON (22 Series with RX switch and connectors). • Interchangeable: all Allegion Connect products utilize the same connectors 2. Specify harness length; Consult door manufacturer for harness length • Maintenance: you no longer need to cut away wire to disconnect Allegion products, also available is a service kit specifically for Connect products. Wire run options 20• Von Duprin 22 Series 20 3. Specify Von Duprin EPT10-CON or Ives 7200 power transfer hinge 22 Options & accessories AX Accessible device 229 Cover plate kit The AX device is a UL certified exit device designed to meet the progressive requirements of the California Building Code for accessible openings. This device meets the 5 lbs of operating force requirement called for in chapter 11B-309.4. The AX device also exceeds ANSI/BHMA requirements. Available devices include: AX22 Series, AX22-F Series. Additionally, all AX devices will be shipped with a new UL label clearly stating “Meets California building Code (2013) Sec. 11B-309.4” and an “AX” identifier label on device center case. See images below for reference. Cover plate kit contains inside and outside plates for hinge stile cutouts, an inside plate for the lock stile, and necessary screws. Plates are designed to cover cutouts required by most existing exit device installations. Center Case Hinge Side Case RG-27 Vertical rod and latch guard RG-27 Series vertical rod and latch guards protect the bottom rods of exit devices from the damaging impacts of carts or gurneys passing through doors. (If bottom rods become damaged, the exit device will not function as intended and can jeopardize the ability to exit safely during an emergency.) Note: device shown below for reference is a 98 Series exit device. All stainless steel construction in US32D finish. Latch guards can cover latches as large as 1 1/4"W x 10"H x 1 7/8" projection. LBR Less bottom rod LBR option for fire exit devices is available using a spring loaded auxiliary fire pin installed in the lower door edge. When exposed to heat the auxiliary fire pin releases, keeping the doors in alignment and closed during a fire. LBR devices must be ordered in pairs of vertical rod devices, or must be used in conjunction with an approved automatic or constant latching flush bolt. LD Less dogging Less dogging is available on all 22 Series panic exit devices. To order, use prefix LD. Example LD22EO Rod guard Extended latch guard Latch guard 10" 3' or 4' PL Pullman latch Pullman latches are always extended and are most commonly used in conjunction with electric strikes and LBR-less bottom rod applications. Not available with fire rated exit devices. Pullman latches do not deadlock and are not recommended for applications where security may be compromised. When the PL is specified the standard latches are replaced with Pullman style latches at an additional charge. See Pricebook for details. GBK Glass bead kit Glass bead kits are used on doors with raised glass beads. Each kit consists of 1/4" (6 mm) shim sets. GBK for surface vertical rod devices ship with 1/8" (3 mm) shims for rod guides. Shims are not required for top and bottom latches To order, specify: 1. With device specify GBK in device description 2. To order separately, specify model 22GBK-R (rim), 22GBK-499F (rim), 22GBK-SV (vertical rod) 3. Finish, SP28 or SP313 12" 4 3/8" 21/4" Mechanical options & accessories 36" (914 mm) In addition to protecting the vertical rod, the guard provides a smooth, unobstructed surface so the door can be pushed open easily with the bumpers of a wheelchair. The latch guard portion is 10" high. The standard latch guard features a 45° ramp. The extended latch guard offers a continuous ramp in 3' or 4' widths. 3' = 33 1/8" 4' = 45 1/8" Models RGO Rod guard only (Projection 1 3/16") RG-27 Rod and latch guard RG-27-3 3' (914 mm) Rod Guard and Extended Latch Guard RG-27-4 4' (1219 mm) Rod Guard and Extended Latch Guard LGO Latch guard only LGO-3 3' (914 mm) Extended latch guard only LGO-4 4' (1219 mm) Extended latch guard only Note: Not for use on wood fire doors, except with SLM (special laminate material) blocking. To order, specify: 1. Model number. 2. Handing (except on RGO). 3. Door material if other than Hollow Metal. 4. Optional sex bolt mounting available. Von Duprin 22 Series • 21 21 22 Device options & accessories Cylinders Cylinders are not furnished with device or trim and must be specified when ordering. Refer to trim pages for cylinder type. Device options & accessories Mortise — 3215 (Schlage 20-001, B502-191 cam) 22• Von Duprin 22 Series 22 Rim — 3216 (Schlage 20-022 cam) UL Listings, grade, type, function options & dimensions UL Listed — Fire exit hardware label/opening size Double door Door material Single door 22-F HM 3 Hour 4' x 8' 3 Hour 22-F WD 90 Minute 4' x 8' 2227-F HM — 2227-F WD — 2227-F WD 2227-F-LBR HM 2227-F-LBR 2227-F-LBR With mullion Same direction** Double egress 8' x 8' — — — — 90 Minute 8' x 8' — — — — — — — — — WD — WD — — — — — 90 Minute * 8' x 10' 3 Hour 8' x 10' — 20 Minute* 8' x 10' 90 Minute* 8' x 9' — — 90 Minute 8' x 9' — — — — 90 Minute* 8' x 10' 3 Hour 8' x 10' — — — 20 Minute* 8' x 10' 90 Minute* 8' x 9' — — — 90 Minute* 8' x 9' — — ANSI Function, grade & type * Door handing Left hand reverse orientation *UL listing for wood doors may be for a specific door manufacturer. Consult wood door manufacturers for current UL listings. **Currently, no door manufacturers offer a listing over 90 minutes with doors swinging same direction. Function Grade 1 type 1 Grade 1 type 2 01 22EO & 22EOF 2227EO & 227EO-F 02 22DT 2227DT 03 22NL & 22NL-F 2227NL & 2227NL- F 05 22TP & 22TP-F 2227TP & 2227TP-F 08 22K & 22K-F 2227K & 2227K-F 08 22L & 22L-F 2227L & 2227L-F Right hand reverse orientation LHR (Left hand reverse) RHR (Right hand reverse) Outside 2 1/8" (54mm) Dimensions Vertical rod dimensions Vertical rods are 1/2" (13 mm) square tubing 23/4" (70mm) 41/4" (108mm) 4 1/2" (114mm) 2" 3' (914mm) 331/8" (841mm) 4' (1219mm) 451/8" (1146mm) 3' (914mm) 4' (1219mm) Additional information Exit device (51mm) 18" (457mm) 1 1/2" (38mm) 24" (610mm) 37 7/16" (951mm) 3 3/4" (95mm) Neutral 23/4" 3 " (76mm) Depressed (60mm) 37 7/16"" (951mm) Finishes Finishes* US Number BHMA Number Sprayed aluminum SP28 689 Sprayed dark bronze SP313 695 Finishes Color * Note: Durable powder coated finishes available at specific special request. PLEASE CONTACT FACTORY. Von Duprin 22 Series • 23 23 About Allegion Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 8,000 people and sells products in more than 120 countries across the world. Allegion comprises more than 25 global brands, including strategic brands CISA®, Interflex®, LCN®, Schlage® and Von Duprin®. For more, visit www.allegion.com © 2014 Allegion 006588, Rev. 11/14 www.allegion.com/us
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2014:12:04 08:34:59-05:00 Metadata Date : 2014:12:04 08:35:15-05:00 Modify Date : 2014:12:04 08:35:15-05:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:ac94fba7-6140-2c48-8a9c-fd5acd30ab4e Original Document ID : xmp.did:f706f4f7-8d7d-4b9a-aea2-49154b45a623 Document ID : xmp.id:0EDE72DF0B2168118083946D2B575BF4 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:0DDE72DF0B2168118083946D2B575BF4 Derived From Document ID : xmp.did:CB484273A02168118083D60E1226AE21 Derived From Original Document ID: xmp.did:f706f4f7-8d7d-4b9a-aea2-49154b45a623 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2014:12:04 08:34:59-05:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 24 Creator : Adobe InDesign CS6 (Macintosh)EXIF Metadata provided by EXIF.tools