Von Duprin 33A.35A Series Catalog 33A/35A 106593
User Manual: Von Duprin Von Duprin 33A/35A Series Catalog Catalog
Open the PDF directly: View PDF 
.
Page Count: 50
| Download | |
| Open PDF In Browser | View PDF |
33A/35A™ Series Exit devices Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part of a door opening or access system and will provide safe and reliable service when properly applied and maintained. It is the policy of Von Duprin to design and manufacture exit devices to a high standard of quality and reliability in accordance with accepted U.S. domestic and international standards. It is intended that the information included in this publication, when properly used, will provide clear and reliable guidelines to the proper general selection and application. However, the scope of the information is necessarily limited. 33A Series features grooved mechanism case. 35A Series features smooth mechanism case. Von Duprin pushpad exit devices are available in two external surface styles, designated 33A Series and 35A Series. The two styles are mechanically and dimensionally identical and provide a wide selection of appearance options. The Quiet One® A fluid damper decelerates the pushpad on its return stroke and eliminates most noise associated with exit device operations. Furnished on all 33A/35A Series exit devices. VON DUPRIN Administrative Offices 2720 Tobey Dr. Indianapolis, IN 46219 2 • Von Duprin 33A/35A Series Customer Service 877-671-7011 800-999-0328 - Fax Technical Support 877-671-7011 Table of contents Exit hardware Rim devices 33A/35A 8 Trim 9 Surface mounted Vertical rod devices 3327A/3527A 12 Trim 13 Concealed vertical rod devices 3347A/3547A 16 Trim 17 3348A/3548A 20 Trim 21 3349A/3549A 24 Trim 25 3350A/3550A 28 Trim 29 Fire exit hardware Deadlocking latchbolt Deadlocking latchbolt prevents forced latchbolt retraction providing higher security for your openings. 33A-F/35A-F 10 Trim 11 3327A-F/3527A-F 14 Trim 15 3347A-F/3547A-F 18 Trim 19 3348A-F/3548A-F 22 Trim 23 3349A-F/3547A-F 26 Trim 27 3350A-F/3550A-F 30 Trim 31 Latch bolt (33A Rim device shown) Von Duprin 33A/35A Series • 3 Options and accessories Applications & trim operation Trim selection Optional trim Trim options Optional levers Optional trim Trim selection Operation options Strike options Optional strikes Additional information Electrical options ALK Exit alarm kit CX Chexit delayed exit RX Request to exit WP-RX Request to exit E-Trim LX Latch bolt monitoring EL Electric latch retraction QEL Electric latch retraction SS Signal switch PN Pneumatic LBR/LBL Less bottom rod/latch PL Pullman Latch RG-27 Vertical rod and latch guard Dummy pushpad CD Cylinder dogging CDK, HDK Cylinder dogging and Hex key dogging kits GBK Glass bead kit Cylinders CON Allegion Connect Electrical accessories Power supplies PS902 PS914 EPT Electric power transfer ANSI Grade, type & function Device dimensions Finishes Fire label ratings/applications Handing How-to-order information Nomenclature Popular double door applications Minimum stile information Symbols Indicates fire rated application Indicates ADA products C o n t i n u i n g c o m m i t m e n t t o q u a l i t y. How to order information Rim devices, specify: 1. Exit device model number with trim selection. Examples: 33A-EO (exit only with no outside trim). 33A-NL (includes 386NL trim). 33A-NL-OP (includes the 388 trim less pull). 2. S ize 4' (1219mm) for door sizes 2' 10" (940mm) to 4' (1219mm). Size 3' (914mm) for door sizes 2' 4" (792mm) to 3' (914mm) is shipped standard. 3. Door thickness if other than 1 3/4" (44mm). 4. D oor and frame material if other than aluminum. 5. F inish, see page 38. 6. H anding required on “L”, “SS”, or “386NL”. Specify LHR or RHR. See page 7. Vertical rod devices, specify: 1. E xit device model number with trim selection. Examples: 3327AEO (exit only with no outside trim.) 3327A-TL-OP (includes 360T Control) 3327A-TL (includes 374T and 386DT). 2. S ize 2' (1219mm) for door sizes 2' (610mm). Size 3' (914mm) for door sizes 2' 2" (792mm) to 3' (914mm) is shipped standard. Size 4' (1219mm) for door sizes 2' 8" (940mm) to 4' (1219mm). 3. D oor thickness if other than 1 3/4" (44mm). 4. D oor height if greater than 7' (2134mm) surface vertical rod device (8' 4" for concealed devices) or extension rods will be supplied. 5. D oor and frame material if other than aluminum or hollow metal. 6. Finish, see page 38. 7. H anding required on “L”, “SS”, or “386NL”. Specify LHR or RHR. See page 7. Pullman latches are optional for 3327A/3527A and 3347A/3547A devices. Latchbolts remain extended at all times. Specify “Pullman Latch” when required. 4 • Von Duprin 33A/35A Series Device trim, cross-reference*: 33/35 Devices Status 33A/35A Devices 333NL-TP Replaced 386NL 333DT Replaced 386DT 337NL-TP 337DT 334 334 x 550 370L 370T 372L 374T x 333DT — 376T x 337DT — 3308NL 3308DT Replaced Replaced Replaced Replaced Replaced Replaced Replaced Replaced New Replaced New Obsolete Obsolete — New — New 386NL 386DT 388 388 x 550 360L 360T 360L 374T x 386DT 374T x 392-6 376T x 386DT 376T x 392-6 — — 388 x Ives 8190 Series Pull 360T x Ives 8190 Series Pull *New trims not compatible with old devices, neither are old trims with new devices. Nomenclature – how to order CD CX EL HD-EL QEL HH LD LX LX-LC LX-RX LX-RX-LC PL PN RX RX-LC RX2 SS AX WP-RX Cylinder dogging - panic only Chexit delayed egress Electric latch retraction Electric latch retraction with hex dogging Quiet electric latch Hurricane Less dogging Latchbolt monitoring Latch bolt monitor low current Latchbolt monitor / request to exit Latchbolt monitor / request to exit low current Pullman latch Pneumatic Request to exit Request to exit low current Request to exit double switch Signal switch Accessible device Waterproof request to exit 35A 33A Series 35A-smooth Series 33A-grooved A 27A 47A 48A 49A Rim device Surface mounted vertical rod device Concealed vertical rod device Concealed vertical rod device Concealed vertical cable device DT EO L L-BE L-DT L-NL NL NL-OP T TL T-BE TL-BE Dummy trim Exit only Lever (classroom) Lever-blank escutcheon (passage) Lever-dummy trim Rigid Lever - Night latch (key retracts latchbolt) Night latch (key retracts latchbolt) Night latch cylinder assembly – optional pull Thumbturn Turn Lever Thumbturn-blank escutcheon Turn Lever-blank escutcheon (Passage) XX EL 33 27A -L -16 -F LBR 3' US3 RHR Lever Style 06 standard Optional 01, 02, 02KN, 03, 03KN, 05, 06KN, 07, 12 (handed), 16, 17, 17KN, 18, ACC, AST, MER, STA F Fire Exit Device - Rim, 27A, 47A, 48A, 49A Only LBR LBL ALK ALK-AR1 ALK-AR3 ALK-AR6 CON Less Bottom Rod Less Bottom Latch Standard Alarm Kit Auto-Reset 1 1/2 minute alarm kit Auto-Reset 3 minute alarm kit Auto-Reset 4 1/2₂ minute alarm kit Allegion Connect 2' 3' 4' 2' Device (2' Door Size) 27A, 47A or 49A only 3' Device (2' 4"– 3' Door Size) 4' Device (2' 10"– 4' Door size) Finishes US3, US4, US10, US15 (35A only), US26, US26D, US26D-AM, US28, 313, 315 HR Handing – RHR or LHR Von Duprin 33A/35A Series • 5 Popular double door applications Single door applications Double door applications Single rim device Single mortise lock device Mortise lock and surface mounted or concealed vertical cable/rod device combination—same direction Two rim devices with mullion— same direction Two vertical rods—double egress Door handing Left hand-reverse Left Hand-Reverse orientation Orientation Right hand-reverse Right Hand-Reverse orientation Orientation LHR RHR hand reverse) (Left(Left hand-reverse) (Right hand reverse) (Right hand-reverse) Outside Outside Two surface mounted vertical rod devices—same direction (do not use with overlapping astragal) Two Fire Exit Hardware vertical cables/rods with auxilary fire latch-LBR option Two concealed vertical cables/rods Trim Operation lever Standard Night latch Blank escutcheon Dummy Key locks and unlocks lever. e.g., 360L (Classroom) Key unlocks lever, lever is relocked when key is removed. Use NL suffix, e.g. 360LNL. (Storeroom) Lever always active. Use BE suffix, e.g., 360L-BE. (Passage) Lever is rigid for pull operation. Use DT suffix, e.g., 360L-DT. 374T/376T Series thumbturn control Standard operation, key locks and unlocks thumbturn. Optional operation, key unlocks thumbturn, re-locks when key is removed. This operation is created by changing the cylinder plate included with control. Use 1 1/2" mortise cylinder with a straight cam. Schlage cam reference B502-191. Not available for 3349/3549 devices. E360 Series controls The E360 series controls provide the same choice of lever or thumbturn control of the 33A/35A Series exit device. Additionally, these trims have the advantage of being electrically controllable by a remote switching device, an access control system or automatic fire alarm system. The trim operates with a rotary solenoid that controls the locking cam the same way the standard cylinder works. These trims are available as –BE (Blank Escutcheon) function only. These trims are designed for use with the rim, surface vertical and concealed vertical 33A/35A Series exit device. No cylinder override. Options: 6 • Von Duprin 33A/35A Series • Available in all device finishes • 24VDC Solenoid (.5 amp draw) • Fail Safe (FS) or Fail Secure (FSE) • Blank Escutcheon (BE) only To order, specify: 1. FSE or FS 2. H anding - (Lever control) field reversible 3. E PT-2/EPT-10 Power Transfer or Electric Hinge will be used Lever styles M51 Knurling available M52 Knurling available M53 M54 M55 M56 M57 •• M61 (Handed) M62 •• (Handed) M63 (Handed) M81 Knurling available M82 M83 M84 M85 (Handed) •• Available in Stainless Steel substrate ONLY. Standard Levers 01 02 Knurling available 03* Knurling available 05 06* Default lever Knurling available 07 12 (Handed) 16 (Omega) 17* Knurling available 18 ACC (Accent) (Handed) AST (Asti) (Handed) MER (Merano) (Handed) STA (St. Annes) (Handed) LAT* Latitude LON* Longitude *Available in Stainless Steel - specify SS when ordering Von Duprin 33A/35A Series • 7 33A/35A Rim device 1439 Roller ships standard, optional strikes available 33A and 35A for all types of single and double doors with mullion, UL listed for panic exit hardware. Devices are ANSI A156.3 – 2014 Grade 1. The 35A has a smooth mechanism case and the 33A has grooved case. The rim device is non-handed except when the SS (signal switch) option is used. See opposite page for available outside trim and device functions. 33A/35A fits door stiles as narrow as 1 3/4” (44mm). Newly designed device has a one piece center case cover. 299 Strike needs to be specified for Hollow Metal Frames Finishes – US3, US4, US10, US15 (35A Only) US26, US26D, US26D-AM,US28, 313 and 315. Specifications 33A/35A Rim device Device lengths Device centerline from finished floor Center case dimensions Mechanism case dimensions Projection QEL AX 2 1/4" x 2 1/4" (57mm x 57mm) Quiet electric latch retraction • Bolt retraction via switch • Converts exit door to push-pull operation Pushbar Neutral – 3 13/16" (97 mm) Pushbar Depressed – 3 1/16" (78 mm) Accessible device • UL certified to meet new 5 lb. maximum operating force requirement • Exceeds ANSI/ BHMA requirements CX ALK Chexit delayed exit • Meets NFPA 101 requirements • Self-contained controls, locking, alarm Alarm exit kit • Unauthorized opening triggers 85-decibel horn • Set in armed or disarmed mode by key EL RX Electric latch retraction • Enables remote unlatching • Alternative to manual dogging Pushpad monitor switch • Signals use of an opening • SPDT switch to monitor pushpad E (E360L) CON Electric lever trim • Electrified remote locking/unlocking • Fail safe & fail secure options available • No key override Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply PN CD Pneumatic latch retraction • For areas where electrical devices banned • Special linkage for mechanical or pneumatic dogging Cylinder dogging • Replaces hex key dogging • Requires standard 1 1/4" mortise cylinder 3' 2' 4" to 3' (711mm to 914 mm) Door size 4' 2'10" to 4' (864 mm to 1219 mm) Door size 39 13/16" (1011 mm) 39 11/16" (1008 mm) with Mullion 8 3/16" x 1 9/16" x 2 13/32" (208mm x 40mm x 62mm) Latch bolt Deadlocking, 3/4" (19mm) throw Fasteners & sex bolts (SNB) Includes 13/4" (44mm) – 2 1/4" (57mm) wood & metal doors #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device) ALK Alarm kit CX Chexit delayed exit EL Electric latch retraction HD-EL Electric latch retraction with hex dogging QEL Quiet electric latch retraction RX Request to exit, WP-RX waterproof option LX Latchbolt monitoring LX-RX Request to exit / latchbolt monitoring RX-LC, LX-LC, LX-RX-LC Low current option for RX, LX, LX-RX SS Signal switch Electric options CON Allegion Connect Mechanical options Miscellaneous options Dogging feature Strikes 8 • Von Duprin 33A/35A Series AX Accessible device GBK Glass bead kit PN Pneumatic SG Safety glow SEC Security screws SNB Sex bolts Hex Dogging standard CD Cylinder dogging LD Less dogging 1439 – Dull black Optional strikes Standard trim EO DT NL NL-OP No outside trim Exit only Dummy trim Pull when dogged Night latch Key retracts latchbolt Night latch Key retracts latchbolt optional pull required Product description 33A-EO 35A-EO 33A-DT 35A-DT 33A-NL 35A-NL 33A-NL-OP 35A-NL-OP Trim description — 386DT — 7 /32" x 1 /8" (190x41mm) 7 /32" x 1 /8" (190x41mm) 7 1/2" x 1 11/16" (190x43mm) — 8¹⁄₂" x 4⁵⁄₁₆" (216x110mm) 8¹⁄₂" x 4⁵⁄₁₆" (216x110mm) — Projection — 2 7/16" (62mm) 2 7/16" (62mm) 1" (25mm) ANSI function 01 02 03 03 Base size Grip size 15 386NL 5 15 388 5 — — Rim Rim — — Handed — — x360L-DT x550DT x IVES 8190 — x550DT x IVES 8190 10" L L-BE T T-BE Lever Key Locks and Unlocks Lever Blank Escutcheon Always Operable (No Cylinder) Thumbturn Key Locks and Unlocks Thumbturn Always Operable (No Cylinder) 33A-L 35A-L 33A-L-BE 35A-L-BE 33A-T 35A-T 33A-T-BE 35A-T-BE Optional trim Product description Trim description 360L 360L-BE 360T 360T-BE Base size 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7¹⁄₂" x 1¹¹⁄₁₆" x ⁷⁄₈" (190x43x22mm) Grip size — — — — Projection 3" (76mm) 3" (76mm) 1 13/16" (46mm) 1 13/16" (46mm) ANSI function 08 or 09 field selectable — 11 or 12 field selectable — Cylinder type 1 /4" Mortise Handing Handed/Reversible — Optional trim 1 — 1 1 /4" Mortise — Handed/Reversible — — E360L-BE — E360T-BE 33A/35A Rim device trim Cylinder type Handing Note: 360L & 360T used on wood door require the 33A-WDA cover plate Notes Von Duprin 33A/35A Series • 9 33A-F/35A-F Rim fire exit device The 299F Strike ships standard 33A-F and 35A-F for all types of single and double fire rated doors with mullion, UL listed for Fire Exit Hardware. See page 47 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2014 Grade 1. The 35A has a smooth mechanism case and the 33A has grooved case. The rim device is non-handed except when the SS (signal switch) option is used. See opposite page for available outside trim and device functions. 33A/35A fits door stiles as narrow as 1 3/4” (44mm). Finishes – US3, US4, US10, US15 (35A Only) US26, US26D, US26D-AM,US28, 313 and 315. 33A/35A Rim fire exit device Specifications Device lengths Device centerline from finished floor Center case dimensions Mechanism case dimensions Projection QEL AX 2 1/4" x 2 1/4" (57mm x 57mm) Quiet electric latch retraction • Bolt retraction via switch • Converts exit door to push-pull operation Pushbar Neutral – 3 13/16" (97 mm) Pushbar Depressed – 3 1/16" (78 mm) Accessible device • UL certified to meet new 5 lb. maximum operating force requirement • Exceeds ANSI/ BHMA requirements CX ALK Chexit delayed exit • Meets NFPA 101 requirements • Self-contained controls, locking, alarm Alarm exit kit • Unauthorized opening triggers 85-decibel horn • Set in armed or disarmed mode by key EL RX Electric latch retraction • Enables remote unlatching • Alternative to manual dogging Pushpad monitor switch • Signals use of an opening • SPDT switch to monitor pushpad E (E360L) CON Electric lever trim • Electrified remote locking/unlocking • Fail safe & fail secure options available • No key override Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply 3' 2' 4" to 3' (711mm to 914 mm) Door size 4' 2'10" to 4' (864 mm to 1219 mm) Door size 39 13/16" (1011 mm) 39 11/16" (1008 mm) with Mullion 8 3/16" x 1 9/16" x 2 13/32" (208mm x 40mm x 62mm) Latch bolt Deadlocking, 3/4" (19mm) throw Fasteners & sex bolts (SNB) Includes 13/4" (44mm) – 2 1/4" (57mm) wood & metal doors #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device) ALK Alarm kit CX Chexit delayed exit EL Electric latch retraction QEL Quiet electric latch retraction RX Request to exit, WP-RX waterproof option LX Latchbolt monitoring LX-RX Request to exit / latchbolt monitoring RX-LC, LX-LC, LX-RX-LC Low current option for RX, LX, LX-RX SS Signal switch Electric options CON Allegion Connect Mechanical options Miscellaneous options Strikes 10 • Von Duprin 33A/35A Series 499F Strike with 9854/9954 mullion AX Accessible device GBK Glass bead kit PN Pneumatic SG Safety glow SEC Security screws SNB Sex bolts 299F – Dull black, 499F with mullions Standard trim NL NL-OP No outside trim Exit only Night latch Key retracts latchbolt Night latch Key retracts latchbolt optional pull required Product description 33A-EO-F 35A-EO-F 33A-NL-F 35A-NL-F 33A-NL-OP-F 35A-NL-OP-F Trim description — 386NL 388 — 7 /32" x 1 /8" (190x41mm) 7 1/2" x 1 11/16" (190x43mm) — 8¹⁄₂" x 4⁵⁄₁₆" (216x110mm) — Projection — 2 7/16" (62mm) 1" (25mm) ANSI function 01 03 03 Cylinder type — Rim Rim Handing — Handed — — — x550DT x IVES 8190 10" L L-BE T T-BE Lever Key Locks and Unlocks Lever Blank Escutcheon Always Operable (No Cylinder) Thumbturn Key Locks and Unlocks Thumbturn Always Operable (No Cylinder) 33A-L-F 35A-L-F 33A-L-BE-F 35A-L-BE-F 33A-T-F 35A-T-F 33A-T-BE-F 35A-T-BE-F Base size Grip size Optional trim Product description 15 5 Trim description 360L 360L-BE 360T 360T-BE Base size 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7¹⁄₂" x 1¹¹⁄₁₆" x ⁷⁄₈" (190x43x22mm) Grip size — — — — Projection 3" (76mm) 3" (76mm) 1 13/16" (46mm) 1 13/16" (46mm) ANSI function 08 or 09 field selectable — 11 or 12 field selectable — Cylinder type 1 /4" Mortise Handing Handed/Reversible — Optional trim 1 — 1 1 /4" Mortise — Handed/Reversible — — E360L-BE — E360T-BE 33A/35A Rim fire exit device trim EO Note: 360L & 360T used on wood door require the 33A-WDA cover plate Notes Von Duprin 33A/35A Series • 11 3327A/3527A Surface mounted vertical rod device Top Latch 266 Top Strike 3327A/3527A Surface mounted vertical rod device 3327A and 3527A for all types of single and double doors, UL listed for panic exit hardware. Devices are ANSI A156.3 – 2008 Grade 1. The 3527A has a smooth mechanism case and the 3327A has grooved case. The surface vertical rod device is non-handed except when the SS (signal switch) option is used. See opposite page for available outside trim and device functions. 248L-4 Bottom Strike for use with Threshold 3327A/3527A fits door stiles as narrow as 1 3/4" (44mm). Newly designed device has a one piece center case cover. Finishes – US3, US4, US10, US15 (35A Only) US26, US26D, US26D-AM,US28, 313 and 315. Specifications Device lengths Device centerline from finished floor 304L 2' 2' (610 mm) Door size 3' 2'4" to 3' (660mm to 914 mm) door size 4' 2'8" to 4' (813 mm to 1219 mm) door size 39 13/16" (1006mm) Center case dimensions 8 13/16" x 2 13/32" x 1 9/16" (208mm x 62mm x 40mm) Mechanism case dimensions 2 /4" x 2 /4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm) Pushbar depressed – 3 1/16" (78 mm) 1 1 Latch bolt Deadlocking anti-friction top & bottom bolt 5/8" (16mm) throw Bottom Latch QEL RX Quiet electric latch retraction • Bolt retraction via switch • Converts exit door to push-pull operation Pushpad monitor switch • Signals use of an opening • SPDT switch to monitor pushpad Door undercut 1 Top & bottom latch 4 1/2" x 2 1/8" x 1 1/2" (114mm x 54mm x 38mm) E (E360L) ALK Vertical rods /2" square tubing, standard rods accommodate 7'(2134mm) door Top rod length is 34 15/16" (887mm) Bottom rod length is 31 1/4" (794mm) Extension rods available 1' (205mm) or 3' (914mm) for doors over 7' One piece top rod available for 8' (2438mm) -10' (3048mm) door Includes 1 3/4" (44mm) – 2 1/4" (57mm) wood & metal doors #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device) #325 SNB furnished for top and bottom latches ALK Alarm kit CX Chexit delayed exit EL Electric latch retraction HD-EL Electric latch retraction with hex dogging QEL Quiet electric latch retraction RX Request to exit, WP-RX waterproof option LX Latchbolt monitoring LX-RX Request to exit / latchbolt monitoring RX-LC, LX-LC, LX-RX-LC Low current option for RX, LX, LX-RX SS Signal switch CON Allegion Connect GBK Glass bead kit PL Pullman latch PN Pneumatic LBR Less bottom rod SG Safety glow SEC Security screws SNB Sex bolts Hex dogging standard CD Cylinder dogging LD Less dogging Top – 266 – Dull black, bottom – 248L4 & 304L – Unfinished Optional strikes Electric lever trim • Electrified remote locking/unlocking • Fail safe & fail secure options available • No key override Alarm exit kit • Unauthorized opening triggers 85-decibel horn • Set in armed or disarmed mode by key DI CON Dogging Indicator • Monitor dogging status without a control panel • Red indicator light shows visibility to dogging from over 75 feet Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply EL PN Electric latch retraction • Enables remote unlatching • Alternative to manual dogging Pneumatic latch retraction • For areas where electrical devices banned • Special linkage for mechanical or pneumatic dogging Fasteners & sex bolts (SNB) Electric options Miscellaneous options Dogging feature Strikes 12 • Von Duprin 33A/35A Series /4" (7mm) 1 CD Cylinder dogging • Replaces hex key dogging • Requires standard 1 1/4" mortise cylinder Standard trim EO DT NL NL-OP TL Dummy trim pull when dogged Night latch key retracts latchbolt Night latch key retracts latchbolt optional pull required Thumbturn key locks & unlocks Product description 3327A-EO 3527A-EO 3327A-DT 3527A-DT 3327A-NL 3527A-NL 3327A-NL-OP 3527A-NL-OP 3327A-TL 3527A-TL Trim description — 386DT 386NL 388 374T x 386 — 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 5/8" (190x41mm) 7 1/2" x 1 11/16" x 7/8" (190x43mmx22mm) — 8 1/2" x 4 5/16" (216x110mm) 8 1/2" x 4 5/16" (216x110mm) — — Base size Grip size Projection — 2 7/16" (62mm) 2 7/16" (62mm) 1" (25mm) 1 13/16" (46mm) ANSI function 01 02 03 03 11-12 field selectable Cylinder type — — Rim Rim 1 1/4" Mortise Handing — — Handed — — — x 360L-DT x 550DT x IVES 8190 — x 550DT x IVES 8190 10" x 392-6 TL-BE L L-BE T T-BE Thumbturn-blank escutcheon always operable (no cylinder) Lever key locks and unlocks Lever blank escutcheon always operable (no cylinder) Thumbturn key locks and unlocks Thumbturn always operable (no cylinder) Product description 3327A-TL-BE 3527A-TL-BE 3327A-L 3527A-L 3327A-L-BE 3527A-L-BE 3327A-T 3527A-T 3327A-T-BE 3527A-T-BE Trim description 374T-BE x 386 360L 360L-BE 360T 360T-BE Base size 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) Grip size 8 1/2" x 4 5/16" (216x110mm) — — — — Projection 113/16" (46mm) 3" (76mm) 3" (76mm) 113/16" (46mm) 113/16" (46mm) — 08 or 09 field selectable — 11 or 12 field selectable — Cylinder type — 1 1/4" Mortise — 1 1/4" Mortise — Handing — Handed/Reversible Handed/Reversible — — x 392-6 — E360L-BE — E360T-BE Optional trim ANSI function 3327A/3527A Surface mounted vertical rod device Exit only no outside trim Optional Trim Note: 360L & 360T used on wood door require the 33A-WDA cover plate 374T used on wood door require #10-WDA cover plate Notes Von Duprin 33A/35A Series • 13 3327A-F/3527A-F Surface mounted vertical rod fire exit device Top latch 3327A-F/3527A-F Surface mounted vertical rod fire exit device 299F Top strike 3327A-F and 3527A-F for all types of double doors up to 8' x 10' (2438mm x 2540mm), UL listed for Fire Exit Hardware. See page 47 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2008 Grade 1. The 3527A-F has a smooth mechanism case and the 3327A-F has grooved case. The surface vertical rod device is non-handed except when the SS (Signal Switch) option is used. See opposite page for available outside trim and device functions. 499F (LBR only) 3327A-F/3527A-F fits door stiles as narrow as 2 3/16" (56 mm). Newly designed device has a one piece center case cover. Finishes – US3, US4, US10, US15 (35A Only) US26, US26D, US26D-AM,US28, 313 and 315. 304L Bottom strike for use with threshold Bottom latch Specifications Device lengths 2' 2' (610 mm) Door size 3' 2'4" to 3' (660mm to 914 mm) door size 4' 2'8" to 4' (813 mm to 1219 mm) door size Device centerline from finished floor 39 13/16" (1006mm) Center case dimensions 8 13/16" x 2 13/32" x 1 9/16" (208mm x 62mm x 40mm) Mechanism case dimensions 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm) Pushbar depressed – 3 1/16" (78 mm) Latch bolt Deadlocking anti-friction top & bottom bolt 5/8" (16mm) throw Door undercut 1 Top & bottom latch 4 1/2" x 2 1/8" x 1 1/2" (114mm x 54mm x 38mm) Vertical rods 1 /2" square tubing, standard rods accommodate 7'(2134mm) door Top rod length is 34 15/16" (887mm) Bottom rod length is 31 1/4" (794mm) Extension rods available 1' (205mm) or 3' (914mm) for doors over 7' One piece top rod available for 8' (2438mm) -10' (3048mm) door /4" (7mm) Fasteners & sex bolts (SNB) Includes 1 3/4" (44mm) – 2 1/4" (57mm) wood & metal doors #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device) #325 SNB furnished for top and bottom latches Electric options ALK Alarm kit CX Chexit delayed exit EL Electric latch retraction HD-EL Electric latch retraction with hex dogging QEL Quiet electric latch retraction RX Request to exit, WP-RX waterproof option LX Latchbolt monitoring LX-RX Request to exit / latchbolt monitoring RX-LC, LX-LC, LX-RX-LC Low current option for RX, LX, LX-RX SS Signal switch CON Allegion Connect Miscellaneous options GBK Glass bead kit PN Pneumatic LBR Less bottom rod SG Safety glow SEC Security screws SNB Sex bolts Strikes Top – 266 – Dull black, bottom – 248L4 & 304L – Unfinished Optional strikes 14 • Von Duprin 33A/35A Series QEL RX Quiet electric latch retraction • Bolt retraction via switch • Converts exit door to push-pull operation Pushpad monitor switch • Signals use of an opening • SPDT switch to monitor pushpad E (E360L) ALK Electric lever trim • Electrified remote locking/unlocking • Fail safe & fail secure options available • No key override Alarm exit kit • Unauthorized opening triggers 85-decibel horn • Set in armed or disarmed mode by key EL CON Electric latch retraction • Enables remote unlatching • Alternative to manual dogging Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply PN Pneumatic latch retraction • For areas where electrical devices banned • Special linkage for mechanical or pneumatic dogging Standard trim EO DT NL NL-OP TL Dummy trim pull when dogged (not recommended for fire device) Night latch key retracts latchbolt Night latch key retracts latchbolt optional pull required Thumbturn key locks & unlocks Product description 3327A-EO-F 3527A-EO-F 3327A-DT-F 3527A-DT-F 3327A-NL-F 3527A-NL-F 3327A-NL-OP-F 3527A-NL-OP-F 3327A-TL-F 3527A-TL-F Trim description — 386DT 386NL 388 374T x 386 — 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 11/16" (190x43mm) 7 1/2" x 1 11/16" x 7/8" (190x43mmx22mm) — 8 1/2" x 4 5/16" (216x110mm) 8 1/2" x 4 5/16" (216x110mm) — 8 1/2" x 4 5/16" (216x110mm) Base size Grip size Projection — 2 7/16" (62mm) 2 7/16" (62mm) 1" (25mm) 1 13/16" (46mm) ANSI function 01 02 03 03 11-12 field selectable Cylinder type — — Rim Rim 1 1/4" Mortise Handing — — Handed — — — x 360L-DT x 550DT x IVES 8190 — x 550DT x IVES 8190 10" x 392-6 TL-BE L L-BE T T-BE Thumbturn-blank escutcheon always operable (no cylinder) Lever key locks and unlocks Lever blank escutcheon always operable (no cylinder) Thumbturn key locks and unlocks (behind C/Case) Thumbturn always operable (no cylinder) (behind C/Case) Product description 3327A-TL-BE-F 3527A-TL-BE-F 3327A-L-F 3527A-L-F 3327A-L-BE-F 3527A-L-BE-F 3327A-T-F 3527A-T-F 3327A-T-BE-F 3527A-T-BE-F Trim description 374T-BE x 386 360L 360L-BE 360T 360T-BE Base size 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) Grip size 8 1/2" x 4 5/16" (216x110mm) — — — — Projection 27/16" (62mm) 3" (76mm) 3" (76mm) 113/16" (46mm) 113/16" (46mm) — 08 or 09 field selectable — 11 or 12 field selectable — Cylinder type — 1 1/4" Mortise — 1 1/4" Mortise — Handing — Handed/Reversible Handed/Reversible — — x 392-6 — E360L-BE — E360T-BE Optional trim ANSI function 3327A-F/3527A-F Surface mounted vertical rod fire exit device Exit only no outside trim Optional Trim Note: 360L & 360T used on Wood Door require the 33A-WDA cover plate 374T used on Wood Door require #10-WDA cover plate Notes Von Duprin 33A/35A Series • 15 3347A/3547A Concealed vertical rod device Top latch 338 Top strike 3347A and 3547A for all types of single and double doors, UL listed for panic exit hardware. Devices are ANSI A156.3 – 2008 Grade 1. The 3547A has a smooth mechanism case and the 3347A has grooved case. The concealed vertical rod device is non-handed except when the SS (signal switch) option is used. See opposite page for available outside trim and device functions. 385A Bottom strike 3347A/3547A Concealed vertical rod device 3347A/3547A fits door stiles as narrow as 2-1/8" (44 mm), wood door stiles as narrow as 4" (102mm). Newly designed device has a one piece center case cover. Finishes – US3, US4, US10, US15 (35A Only) US26, US26D, US26D-AM,US28, 313 and 315. Specifications 283 Top strike for use with wood frames Bottom latch Device lengths 2' 2' (610 mm) Door size 3' 2'4" to 3' (660mm to 914 mm) door size 4' 2'8" to 4' (813 mm to 1219 mm) door size Device centerline from finished floor 39 13/16" (1006mm) Center case dimensions 8 13/16" x 2 13/32" x 1 9/16" (208mm x 62mm x 40mm) Mechanism case dimensions 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm) Pushbar depressed – 3 1/16" (78 mm) QEL RX Quiet electric latch retraction • Bolt retraction via switch • Converts exit door to push-pull operation Pushpad monitor switch • Signals use of an opening • SPDT switch to monitor pushpad Latch bolt Deadlocking anti-friction top & bottom bolt 5/8" (16mm) throw Door undercut 1 /4" (7mm) E (E360L) ALK Top & bottom latch 3 /4" x 1 /2" x 1" (89mm x 38mm x 25mm) Vertical rods Round 2 piece adjustable rods Top rod adjustable from 6'8" (2027mm) to 8'4" (2533mm) Bottom rod adjustable from 35 5/8" (905mm) to 49 5/8" (1260mm) Extension rod kits available for doors over 8'4" (2533mm) Fasteners & sex bolts (SNB) Includes 1 3/4" (44mm) – 2 1/4" (57mm) wood & metal doors #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device) Electric lever trim • Electrified remote locking/unlocking • Fail safe & fail secure options available • No key override Alarm exit kit • Unauthorized opening triggers 85-decibel horn • Set in armed or disarmed mode by key Electric options ALK Alarm kit CX Chexit delayed exit EL Electric latch retraction HD-EL Electric latch retraction with hex dogging QEL Quiet electric latch retraction RX Request to exit, WP-RX waterproof option LX Latchbolt monitoring LX-RX Request to exit / latchbolt monitoring RX-LC, LX-LC, LX-RX-LC Low current option for RX, LX, LX-RX SS Signal switch CON Allegion Connect EL CON Electric latch retraction • Enables remote unlatching • Alternative to manual dogging Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply DI PN Dogging Indicator • Monitor dogging status without a control panel • Red indicator light shows visibility to dogging from over 75 feet Pneumatic latch retraction • For areas where electrical devices banned • Special linkage for mechanical or pneumatic dogging Miscellaneous options 3 1 GBK Glass bead kit PL Pullman latch PN Pneumatic HH Hurricane INS-2/INS-4 Insulclad kits 1/2" / 1/4" panels LBR Less bottom rod SG Safety glow SEC Security screws SNB Sex bolts Dogging feature Hex dogging standard CD Cylinder dogging LD Less dogging Strikes Top – 388 – Unfinished, bottom – 385A – Unfinished Optional strikes 16 • Von Duprin 33A/35A Series CD Cylinder dogging • Replaces hex key dogging • Requires standard 1 1/4" mortise cylinder Standard trim EO DT NL NL-OP TL Dummy trim pull when dogged Night latch key retracts latchbolt Night latch key retracts latchbolt optional pull required Thumbturn key locks & unlocks Product description 3347A-EO 3547A-EO 3347A-DT 3547A-DT 3347A-NL 3547A-NL 3347A-NL-OP 3547A-NL-OP 3347A-TL 3547A-TL Trim description — 386DT 386NL 388 376T x 386 — 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 11/16" (190x43mm) 7 1/2" x 1 11/16" x 7/8" (190x43mmx22mm) — 8 1/2" x 4 5/16" (216x110mm) 8 1/2" x 4 5/16" (216x110mm) — 8 1/2" x 4 5/16" (216x110mm) Base size Grip size Projection — 2 7/16" (62mm) 2 7/16" (62mm) 1" (25mm) 1 13/16" (46mm) ANSI function 01 02 03 03 11-12 field selectable Cylinder type — — Rim Rim 1 1/4" Mortise Handing — — Handed — — — x 360L-DT x 550DT x IVES 8190 — x 550DT x IVES 8190 10" x 392-6 TL-BE L L-BE T T-BE Thumbturn-blank escutcheon always operable (no cylinder) Lever key locks and unlocks Lever blank escutcheon always operable (no cylinder) Thumbturn key locks and unlocks Thumbturn always operable (no cylinder) (behind C/Case) Product description 3347A-TL-BE 3547A-TL-BE 3347A-L 3547A-L 3347A-L-BE 3547A-L-BE 3347A-T 3547A-T 33477A-T-BE 35477A-T-BE Trim description 376T-BE x 386 360L 360L-BE 360T 360T-BE Base size 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) Grip size 8 1/2" x 4 5/16" (216x110mm) — — — — Projection 27/16" (62mm) 3" (76mm) 3" (76mm) 113/16" (46mm) 113/16" (46mm) — 08 or 09 field selectable — 11 or 12 field selectable — Cylinder type — 1 1/4" Mortise — 1 1/4" Mortise — Handing — Handed/Reversible Handed/Reversible — — x 392-6 — E360L-BE — E360T-BE Optional trim ANSI function 3347A/3547A Concealed vertical rod device Exit only no outside trim Optional trim Note: 360L & 360T used on wood door require the 33A-WDA cover plate 374T used on wood door require #10-WDA cover plate Notes Von Duprin 33A/35A Series • 17 3347A-F/3547A-F Concealed vertical rod fire exit device Top latch 3347A-F/3547A -F Concealed vertical rod fire exit device 338 Top strike 3347A-F and 3547A-F for all types of double doors up to 8' x 10' (2438mm x 2540mm), UL listed for fire exit hardware. See page 47 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2008 Grade 1. The 3547A-F has a smooth mechanism case and the 3347A-F has grooved case. The concealed vertical rod device is nonhanded except when the SS (Signal Switch) option is used. See opposite page for available outside trim and device functions. 385A Bottom strike 3347A-F/3547A-F fits door stiles as narrow as 3 1/2" (90mm). Newly designed device has a one piece center case cover. Finishes – US3, US4, US10, US15 (35A Only) US26, US26D, US26D-AM,US28, 313 and 315. Specifications Device lengths 2' 2' (610 mm) Door size 3' 2'4" to 3' (660mm to 914 mm) door size 4' 2'8" to 4' (813 mm to 1219 mm) door size Device centerline from finished floor 39 13/16" (1006mm) Center case dimensions 8 13/16" x 2 13/32" x 1 9/16" (208mm x 62mm x 40mm) Mechanism case dimensions 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm) Pushbar depressed – 3 1/16" (78 mm) Latch bolt Deadlocking anti-friction top & bottom bolt 5/8" (16mm) throw Door undercut 1 Top & bottom latch 4 1/2" x 2 7/8" x 1 1/2" (114mm x 54mm x 38mm) Vertical rods Round 2 piece adjustable rods Top rod adjustable from 6'8" (2027mm) to 8'4" (2533mm) Bottom rod adjustable from 35 5/8" (905mm) to 49 5/8" (1260mm) Extension rod kits available for doors over 8'4" (2533mm) /4" (7mm) Fasteners & sex bolts (SNB) Includes 1 3/4" (44mm) – 2 1/4" (57mm) wood & metal doors #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device) Electric options ALK Alarm kit CX Chexit delayed exit EL Electric latch retraction HD-EL Electric latch retraction with hex dogging QEL Quiet electric latch retraction RX Request to exit, WP-RX waterproof option LX Latchbolt monitoring LX-RX Request to exit / latchbolt monitoring RX-LC, LX-LC, LX-RX-LC Low current option for RX, LX, LX-RX SS Signal switch CON Allegion Connect Miscellaneous options GBK Glass bead kit PN Pneumatic HH Hurricane LBR Less bottom rod SG Safety glow SEC Security screws SNB Sex bolts Strikes Top – 388 – Unfinished, bottom – 385A – Unfinished Optional strikes 18 • Von Duprin 33A/35A Series Bottom latch QEL RX Quiet electric latch retraction • Bolt retraction via switch • Converts exit door to push-pull operation Pushpad monitor switch • Signals use of an opening • SPDT switch to monitor pushpad E (E360L) ALK Electric lever trim • Electrified remote locking/unlocking • Fail safe & fail secure options available • No key override Alarm exit kit • Unauthorized opening triggers 85-decibel horn • Set in armed or disarmed mode by key EL CON Electric latch retraction • Enables remote unlatching • Alternative to manual dogging Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply PN Pneumatic latch retraction • For areas where electrical devices banned • Special linkage for mechanical or pneumatic dogging Standard trim EO DT NL NL-OP TL Dummy trim pull when dogged (not recommended for fire device) Night latch key retracts latchbolt Night latch key retracts latchbolt optional pull required Thumbturn key locks & unlocks Product description 3347A-EO-F 3547A-EO-F 3347A-DT-F 3547A-DT-F 3347A-NL-F 3547A-NL-F 3347A-NL-OP-F 3547A-NL-OP-F 3347A-TL-F 3547A-TL-F Trim description — 386DT 386NL 388 376T x 386 — 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 11/16" (190x43mm) 7 1/2" x 1 11/16" x 7/8" (190x43mmx22mm) — 8 1/2" x 4 5/16" (216x110mm) 8 1/2" x 4 5/16" (216x110mm) — 8 1/2" x 4 5/16" (216x110mm) Base size Grip size Projection — 2 7/16" (62mm) 2 7/16" (62mm) 1" (25mm) 1 13/16" (46mm) ANSI function 01 02 03 03 11-12 Field selectable Cylinder type — — Rim Rim 1 1/4" Mortise Handing — — Handed — — — x 360L-DT x 550DT x IVES 8190 — x 550DT x IVES 8190 10" x 392-6 TL-BE L L-BE T T-BE Thumbturn-blank escutcheon always operable (no cylinder) Lever key locks and unlocks Lever blank escutcheon always operable (no cylinder) Thumbturn key locks and unlocks (behind C/case) Thumbturn always operable (no cylinder) (behind C/case) Product description 3347A-TL-BE-F 3547A-TL-BE-F 3347A-L-F 3547A-L-F 3347A-L-BE-F 3547A-L-BE-F 3347A-T-F 3547A-T-F 3347A-T-BE-F 3547A-T-BE-F Trim description 376T-BE x 386 360L 360L-BE 360T 360T-BE Base size 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) Grip size 8 1/2" x 4 5/16" (216x110mm) — — — — Projection 27/16" (62mm) 3" (76mm) 3" (76mm) 113/16" (46mm) 113/16" (46mm) — 08 or 09 field selectable — 11 or 12 field selectable — Cylinder type — 1 1/4" Mortise — 1 1/4" Mortise — Handing — Handed/Reversible Handed/Reversible — — x 392-6 — E360L-BE — E360T-BE Optional trim ANSI function 3347A-F/3547A -F Concealed vertical rod fire exit device Exit only no outside trim Optional trim Note: 360L & 360T used on wood door require the 33A-WDA cover plate 374T used on wood door require #10-WDA cover plate Notes Von Duprin 33A/35A Series • 19 3348A/3548A Concealed vertical rod device Top latch 338 Top strike 3348A/3548A Concealed vertical rod device 3348A and 3548A for hollow metal single and double doors, UL listed for panic exit hardware. Devices are ANSI A156.3 – 2008 Grade 1. The 3548A has a smooth mechanism case and the 3348A has grooved case.The concealed vertical rod device is non-handed except when the SS (Signal Switch) option is used. See opposite page for available outside trim and device functions. 385A bottom strike 3348A/3548A fits door stiles as narrow as 2 1/8" (44 mm). Newly designed device has a one piece center case cover. Finishes – US3, US4, US10, US15 (35A Only) US26, US26D, US26D-AM,US28, 313 and 315. Bottom latch Specifications Device lengths 2' 2' (610 mm) Door size 3' 2'4" to 3' (660mm to 914 mm) door size 4' 2'8" to 4' (813 mm to 1219 mm) door size Device centerline from finished floor 39 13/16" (1006mm) Standard, adjustable from 35 5/8" (905mm) to 49 5/8" (1260mm) Center case dimensions 8 13/16" x 2 13/32" x 1 9/16" (208mm x 62mm x 40mm) Mechanism case dimensions 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm) Pushbar depressed – 3 1/16" (78 mm) Latch bolt Deadlocking anti-friction top & bottom bolt 3/4" (19mm) throw Deadlocking anti-friction top & bottom bolt 1 1/2" (38mm) throw Door undercut 3 Top & bottom latch 4 1/2" x 2 7/8" x 1 1/2" (114mm x 54mm x 38mm) Vertical rods Round 2 piece adjustable rods Top rod adjustable from 6'8" (2027mm) to 8'4" (2533mm) Bottom rod adjustable from 35 5/8" (905mm) to 49 5/8" (1260mm) Extension rod kits available for doors over 8'4" (2533mm) /4" (19mm) Fasteners & sex bolts (SNB) Includes 1 /4" (44mm) – 2 /4" (57mm) wood & metal doors #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device) Electric options ALK Alarm kit CX Chexit delayed exit EL Electric latch retraction HD-EL Electric latch retraction with hex dogging QEL Quiet electric latch retraction RX Request to exit, WP-RX waterproof option LX Latchbolt monitoring LX-RX Request to exit / latchbolt monitoring RX-LC, LX-LC, LX-RX-LC Low current option for RX, LX, LX-RX SS Signal switch CON Allegion Connect Miscellaneous options 3 1 GBK Glass bead kit PN Pneumatic SG Safety glow SEC Security screws SNB Sex bolts Dogging feature Hex dogging standard CD Cylinder dogging LD Less dogging Strikes Top – 388 – Unfinished, bottom – 385A – Unfinished Optional strikes 20 • Von Duprin 33A/35A Series QEL RX Quiet electric latch retraction • Bolt retraction via switch • Converts exit door to push-pull operation Pushpad monitor switch • Signals use of an opening • SPDT switch to monitor pushpad E (E360L) ALK Electric lever trim • Electrified remote locking/unlocking • Fail safe & fail secure options available • No key override Alarm exit kit • Unauthorized opening triggers 85-decibel horn • Set in armed or disarmed mode by key EL CON Electric latch retraction • Enables remote unlatching • Alternative to manual dogging Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply DI PN Dogging Indicator • Monitor dogging status without a control panel • Red indicator light shows visibility to dogging from over 75 feet Pneumatic latch retraction • For areas where electrical devices banned • Special linkage for mechanical or pneumatic dogging CD Cylinder dogging • Replaces hex key dogging • Requires standard 1 1/4" mortise cylinder Standard trim EO DT NL NL-OP TL Dummy trim pull when dogged Night latch key retracts latchbolt Night latch key retracts latchbolt optional pull required Thumbturn key locks & unlocks Product description 3348A-EO 3548A-EO 3348A-DT 3548A-DT 3348A-NL 3548A-NL 3348A-NL-OP 3548A-NL-OP 3348A-TL 3548A-TL Trim description — 386DT 386NL 388 376T x 386 — 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 11/16" (190x43mm) 7 1/2" x 1 11/16" x 7/8" (190x43mmx22mm) — 8 1/2" x 4 5/16" (216x110mm) 8 1/2" x 4 5/16" (216x110mm) — 8 1/2" x 4 5/16" (216x110mm) Base size Grip size Projection — 2 7/16" (62mm) 2 7/16" (62mm) 1" (25mm) 1 13/16" (46mm) ANSI function 01 02 03 03 11-12 Field selectable Cylinder type — — Rim Rim 1 1/4" Mortise Handing — — Handed — — — x 360L-DT x 550DT x IVES 8190 — x 550DT x IVES 8190 10" x 392-6 TL-BE L L-BE T T-BE Thumbturn-blank escutcheon always operable (no cylinder) Lever key locks and unlocks Lever blank escutcheon always operable (no cylinder) Thumbturn key locks and unlocks Thumbturn always operable (no cylinder) Product description 3348A-TL-BE 3548A-TL-BE 3348A-L 3548A-L 3348A-L-BE 3548A-L-BE 3348A-T 3548A-T 3348A-T-BE 3548A-T-BE Trim description 376T-BE x 386 360L 360L-BE 360T 360T-BE Base size 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) Grip size 8 1/2" x 4 5/16" (216x110mm) — — — — Projection 27/16" (62mm) 3" (76mm) 3" (76mm) 113/16" (46mm) 113/16" (46mm) — 08 or 09 field selectable — 11 or 12 field selectable — Cylinder type — 1 1/4" Mortise — 1 1/4" Mortise — Handing — Handed/Reversible Handed/Reversible — — x 392-6 — E360L-BE — E360T-BE Optional trim ANSI function 3348A/3548A Concealed vertical rod device Exit only no outside trim Optional trim Note: 360L & 360T used on wood door require the 33A-WDA cover plate 374T used on wood door require #10-WDA cover plate Notes Von Duprin 33A/35A Series • 21 3348A-F/3548A-F Concealed vertical rod fire exit device Top latch 3348A-F/3548A-F Concealed vertical rod fire exit device 338 Top strike 3348A-F and 3548A-F for hollow metal single and double doors up to 8' x 10' (2438mm x 2540mm), UL listed for fire exit hardware. See page 47 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2008 Grade 1. The 3548A-F has a smooth mechanism case and the 3348A-F has grooved case. The concealed vertical rod device is non-handed except when the SS (Signal Switch) option is used. See opposite page for available outside trim and device functions. 385A bottom strike 3348A-F/3548A-F fits door stiles as narrow as 3 1/2" (90mm). Newly designed device has a one piece center case cover. Bottom latch Finishes – US3, US4, US10, US15 (35A Only) US26, US26D, US26D-AM,US28, 313 and 315. Specifications Device lengths 2' 2' (610 mm) Door size 3' 2'4" to 3' (660mm to 914 mm) door size 4' 2'8" to 4' (813 mm to 1219 mm) door size Device centerline from finished floor 39 13/16" (1006mm) Standard, Adjustable from 35 5/8" (905mm) to 49 5/8" (1260mm) Center case dimensions 8 13/16" x 2 13/32" x 1 9/16" (208mm x 62mm x 40mm) Mechanism case dimensions 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm) Pushbar depressed – 3 1/16" (78 mm) Latch bolt Deadlocking anti-friction top & bottom bolt 3/4" (19mm) throw Deadlocking anti-friction top & bottom bolt 1 1/2" (38mm) throw Door undercut 3 Top & bottom latch 4 1/4" x 1 1/2" x 1 1/8" (108mm x 38mm x 29mm) Vertical rods Round 2 piece adjustable rods Top rod adjustable from 6'8" (2027mm) to 8'4" (2533mm) Bottom rod adjustable from 35 5/8" (905mm) to 49 5/8" (1260mm) Extension rod kits available for doors over 8'4" (2533mm) /4" (19mm) Fasteners & sex bolts (SNB) Includes 1 /4" (44mm) – 2 /4" (57mm) wood & metal doors #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device) Electric options ALK Alarm kit CX Chexit delayed exit EL Electric latch retraction HD-EL Electric latch retraction with hex dogging QEL Quiet electric latch retraction RX Request to exit, WP-RX waterproof option LX Latchbolt monitoring LX-RX Request to exit / latchbolt monitoring RX-LC, LX-LC, LX-RX-LC Low current option for RX, LX, LX-RX SS Signal switch CON Allegion Connect 3 1 Miscellaneous options GBK Glass bead kit PN Pneumatic SG Safety glow SEC Security screws SNB Sex bolts Dogging feature Hex dogging standard CD Cylinder dogging LD Less dogging Strikes Top – 388 – Unfinished, bottom – 385A – Unfinished Optional strikes 22 • Von Duprin 33A/35A Series QEL RX Quiet electric latch retraction • Bolt retraction via switch • Converts exit door to push-pull operation Pushpad monitor switch • Signals use of an opening • SPDT switch to monitor pushpad E (E360L) ALK Electric lever trim • Electrified remote locking/unlocking • Fail safe & fail secure options available • No key override Alarm exit kit • Unauthorized opening triggers 85-decibel horn • Set in armed or disarmed mode by key EL SG Electric latch retraction • Enables remote unlatching • Alternative to manual dogging Safety glow • Self illuminating touchpad • No batteries or electronics PN CON Pneumatic latch retraction • For areas where electrical devices banned • Special linkage for mechanical or pneumatic dogging Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply Standard trim EO DT NL NL-OP TL Dummy trim pull when dogged (not recommended for fire device) Night latch key retracts latchbolt Night latch key retracts latchbolt optional pull required Thumbturn key locks & unlocks Product description 3348A-EO-F 3548A-EO0F 3348A-DT-F 3548A-DT-F 3348A-NL-F 3548A-NL-F 3348A-NL-OP-F 3548A-NL-OP-F 3348A-TL-F 3548A-TL-F Trim description — 386DT 386NL 388 376T x 386 — 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 11/16" (190x43mm) 7 1/2" x 1 11/16" x 7/8" (190x43mmx22mm) — 8 1/2" x 4 5/16" (216x110mm) 8 1/2" x 4 5/16" (216x110mm) — 8 1/2" x 4 5/16" (216x110mm) Base size Grip size Projection — 2 7/16" (62mm) 2 7/16" (62mm) 1" (25mm) 1 13/16" (46mm) ANSI function 01 02 03 03 11-12 field selectable Cylinder type — — Rim Rim 1 1/4" Mortise Handing — — Handed — — — x 360L-DT x 550DT x IVES 8190 — x 550DT x IVES 8190 10" x 392-6 TL-BE L L-BE T T-BE Thumbturn-blank escutcheon always operable (no cylinder) Lever key locks and unlocks Lever blank escutcheon always operable (no cylinder) Thumbturn key locks and unlocks (behind C/Case) Thumbturn always operable (no cylinder) (behind C/Case) Product description 3348A-TL-BE-F 3548A-TL-BE-F 3348A-L-F 3548A-L-F 3348A-L-BE-F 3548A-L-BE-F 3348A-T-F 3548A-T-F 3348A-T-BE-F 3548A-T-BE-F Trim description 376T-BE x 386 360L 360L-BE 360T 360T-BE Base size 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) Grip size 8 1/2" x 4 5/16" (216x110mm) — — — — Projection 27/16" (62mm) 3" (76mm) 3" (76mm) 113/16" (46mm) 113/16" (46mm) — 08 or 09 field selectable — 11 or 12 field selectable — Cylinder type — 1 1/4" Mortise — 1 1/4" Mortise — Handing — Handed/Reversible Handed/Reversible — — x 392-6 — E360L-BE — E360T-BE Optional trim ANSI function 3348A-F/3548A-F Concealed vertical rod fire exit device Exit only no outside trim Optional trim Note: 360L & 360T used on wood door require the 33A-WDA cover plate 374T used on wood door require #10-WDA cover plate Notes Von Duprin 33A/35A Series • 23 3349A/3549A Concealed vertical cable device Top latch Cable detail 338 Filler plate (retrofit bracket) 3349A/3549A Concealed vertical cable device 3349A and 3549A for hollow metal single and double doors, UL listed for panic exit hardware. Devices are ANSI A156.3 – 2008 (LBL option 2014) Grade 1. The 3549A has a smooth mechanism case and the 3349A has grooved case. The concealed vertical cable device is non-handed except when the SS (signal switch) option is used. See opposite page for available outside trim and device functions. Center slide 249 Top strike 3349A/3549A fits door stiles as narrow as 2 1/8" (44 mm). Newly designed device has a one piece center case cover. Finishes – US3, US3A, US4, US4A, US10, US15 (3549 Only), US26, US26D, US26D-AM Antimicrobial, US28, 313, 315 and 643E. 349 Bottom Strike Bottom latch Specifications Device lengths Device centerline from finished floor 2' 2' (610 mm) Door size 3' 2'4" to 3' (660mm to 914 mm) door size 4' 2'8" to 4' (813 mm to 1219 mm) door size 39 13/16" (1006mm) Center case dimensions 8 13/16" x 2 13/32" x 1 9/16" (208mm x 62mm x 40mm) Mechanism case dimensions 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm) Pushbar depressed – 3 1/16" (78 mm) Deadlocking anti-friction top & bottom bolt 1/2" (13mm) throw Latch bolt Door undercut Top & bottom latch Vertical cables Fasteners & sex bolts (SNB) Electric options Mechanical options Miscellaneous options Dogging feature Strikes /4" (19mm) Maximum - 24231516 Spacer block kit needed for 3/4" (19mm) undercut 5 13/16" x 1 1/4" x 1 7/16" (147mm x 32mm x 37mm) 7 /32" (6mm) Diameter stainless steel cables 3 Includes 1 3/4" (44mm) – 2 1/4" (57mm) wood & metal doors #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device) ALK Alarm kit CX Chexit delayed exit EL Electric latch retraction HD-EL Electric latch retraction with hex dogging QEL Quiet electric latch retraction RX Request to exit, WP-RX waterproof option * LX Latchbolt monitoring * LX-RX Request to exit / latchbolt monitoring * RX-LC, LX-LC, LX-RX-LC Low current option for RX, LX, LX-RX SS Signal switch CON Allegion Connect AX Accessible device GBK Glass bead kit PL Pullman latch PN Pneumatic INS-2/INS-4 Insulclad Kits 1/2" / 1/4" panels LBL Less bottom latch SG Safety glow SEC Security screws SNB Sex bolts Hex dogging standard CD Cylinder dogging LD Less dogging Top – 249 Bottom – 349 *For 33/3549A devices, LX switch monitors trim input or electric dogging of EL/QEL devices. LX switch does not monitor latchbolt condition. 24 • Von Duprin 33A/35A Series QEL AX Quiet electric latch retraction • Bolt retraction via switch • Converts exit door to push-pull operation Accessible device • UL certified to meet new 5 lb. maximum operating force requirement • Exceeds ANSI/ BHMA requirements E (E360L) ALK Electric lever trim • Electrified remote locking/unlocking • Fail safe & fail secure options available • No key override Alarm exit kit • Unauthorized opening triggers 85-decibel horn • Set in armed or disarmed mode by key EL CON Electric latch retraction • Enables remote unlatching • Alternative to manual dogging Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply DI RX Dogging Indicator • Monitor dogging status without a control panel • Red indicator light shows visibility to dogging from over 75 feet Pushpad monitor switch • Signals use of an opening • SPDT switch to monitor pushpad CD PN Cylinder dogging • Replaces hex key dogging • Requires standard 1 1/4" mortise cylinder Pneumatic latch retraction • For areas where electrical devices banned • Special linkage for mechanical or pneumatic dogging Standard trim EO DT NL NL-OP Dummy trim pull when dogged Night latch key retracts latchbolt Night latch key retracts latchbolt optional pull required Product description 3349A-EO 3549A-EO 3349A-DT 3549A-DT 3349A-NL 3549A-NL 3349A-NL-OP 3549A-NL-OP Trim description — 386DT 386NL 388 — 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 11/16" (190x43mm) — 8 1/2" x 4 5/16" (216x110mm) 8 1/2" x 4 5/16" (216x110mm) — Base size Grip size Projection — 2 7/16" (62mm) 2 7/16" (62mm) 1" (25mm) ANSI function 01 02 03 03 Cylinder type — — Rim Rim Handing — — Handed — — x 360L-DT x 550DT x IVES 8190 — x 550DT x IVES 8190 10" L L-BE T T-BE Lever key locks and unlocks Lever blank escutcheon always operable (no cylinder) Thumbturn key locks and unlocks (behind C/case) Thumbturn always operable (no cylinder) (behind C/case) Product description 3349A-L 3549A-L 3349A-L-BE 3549A-L-BE 3349A-T 3549A-T 3349A-T-BE 3549A-T-BE Trim description 360L 360L-BE 360T 360T-BE Base size 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) Grip size — — — — Projection 3" (76mm) 3" (76mm) 113/16" (46mm) 113/16" (46mm) ANSI function 08 or 09 field selectable — 11 or 12 field selectable — Cylinder type 1 /4" Mortise — 1 1 /4" Mortise — Handing Handed/Reversible Handed/Reversible — — — E360L-BE — E360T-BE Optional trim 1 3349A/3549A Concealed vertical cable device Exit only no outside trim Optional trim Nominal door opening height Top cable part number Bottom cable part number 47250178 *82" - 96" *6'10" - 8' 47250175 >96" - 110" >8'0" - 9' 2" 47250176 47250179 >110" - 120" >9'2" - 10' 47250177 47250180 *Default door opening height. Specify door opening height if other than the default. For door heights less than 6'10" and greater than 10', contact our Customer Care department to discuss your specific application needs. Door opening height is distance from bottom of frame header to finished floor. See table on left for standard offering. Von Duprin 33A/35A Series • 25 3349A-F/3549A-F Concealed vertical cable fire exit device Top latch Cable detail 3349A-F/3549A-F Concealed vertical cable fire exit device 338 Filler plate (retrofit bracket) 3349A-F and 3549A-F for hollow metal single and double doors up to 8' x 10' (2438mm x 2540mm), UL listed for fire exit hardware. See page 47 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2008 (LBL option 2014) Grade 1. The 3549A-F has a smooth mechanism case and the 3349A-F has grooved case. The concealed vertical cable device is non-handed except when the SS (signal switch) option is used. See opposite page for available outside trim and device functions. Center slide 249 Top strike 3349A-F/3529A-F fits door stiles as narrow as 3 1/2" (90mm). Newly designed device has a one piece center case cover. Finishes – US3, US3A, US4, US4A, US10, US15 (3549 Only), US26, US26D, US26D-AM Antimicrobial, US28, 313, 315 and 643E. Specifications Device lengths 2' 2' (610 mm) Door size 3' 2'4" to 3' (660mm to 914 mm) door size 4' 2'8" to 4' (813 mm to 1219 mm) door size Device centerline from finished floor 39 13/16" (1006mm) Standard Center case dimensions 8 13/16" x 2 13/32" x 1 9/16" (208mm x 62mm x 40mm) Mechanism case dimensions 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm) Pushbar depressed – 3 1/16" (78 mm) Latch bolt Deadlocking anti-friction top & bottom bolt /2" (13mm) throw Door undercut 3 Top & bottom latch 1 /4" (19mm) Maximum - 24231516 Spacer block kit needed for 3/4" (19mm) undercut 5 13/16" x 1 1/4" x 1 7/16" (147mm x 32mm x 37mm) /32" (6mm) Diameter stainless steel cables Vertical cables 7 Fasteners & sex bolts (SNB) Includes 1 3/4" (44mm) – 2 1/4" (57mm) wood & metal doors #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device) Electric options ALK Alarm kit CX Chexit delayed exit EL Electric latch retraction HD-EL Electric latch retraction with hex dogging QEL Quiet electric latch retraction RX Request to exit, WP-RX waterproof option * LX Latchbolt monitoring * LX-RX Request to exit / latchbolt monitoring * RX-LC, LX-LC, LX-RX-LC Low current option for RX, LX, LX-RX SS Signal switch CON Allegion Connect Mechanical options AX Accessible device Miscellaneous options GBK Glass bead kit PN Pneumatic LBL Less bottom latch SG Safety glow SEC Security screws SNB Sex bolts Strikes Top – 249 Bottom – 349 *For 33/3549A devices, LX switch monitors trim input or electric dogging of EL/QEL devices. LX switch does not monitor latchbolt condition. 26 • Von Duprin 33A/35A Series 349 Bottom Strike Bottom latch QEL AX Quiet electric latch retraction • Bolt retraction via switch • Converts exit door to push-pull operation Accessible device • UL certified to meet new 5 lb. maximum operating force requirement • Exceeds ANSI/ BHMA requirements E (E360L) ALK Electric lever trim • Electrified remote locking/unlocking • Fail safe & fail secure options available • No key override Alarm exit kit • Unauthorized opening triggers 85-decibel horn • Set in armed or disarmed mode by key EL SG Electric latch retraction • Enables remote unlatching • Alternative to manual dogging Safety glow • Self illuminating touchpad • No batteries or electronics CON RX Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply Pushpad monitor switch • Signals use of an opening • SPDT switch to monitor pushpad PN Pneumatic latch retraction • For areas where electrical devices banned • Special linkage for mechanical or pneumatic dogging Standard trim EO DT NL NL-OP Dummy trim pull when dogged Night latch key retracts latchbolt Night latch key retracts latchbolt optional pull required Product description 3349A-EO-F 3549A-EO-F 3349A-DT-F 3549A-DT-F 3349A-NL-F 3549A-NL-F 3349A-NL-OP-F 3549A-NL-OP-F Trim description — 386DT 386NL 388 — 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 11/16" (190x43mm) — 8 1/2" x 4 5/16" (216x110mm) 8 1/2" x 4 5/16" (216x110mm) — Base size Grip size Projection — 2 7/16" (62mm) 2 7/16" (62mm) 1" (25mm) ANSI function 01 02 03 03 Cylinder type — — Rim Rim Handing — — Handed — — x 360L-DT x 550DT x IVES 8190 — x 550DT x IVES 8190 10" L L-BE T T-BE Lever key locks and unlocks Lever blank escutcheon always operable (no cylinder) Thumbturn key locks and unlocks (behind C/case) Thumbturn always operable (no cylinder) (behind C/case) Product description 3349A-L-F 3549A-L-F 3349A-L-BE-F 3549A-L-BE-F 3349A-T-F 3549A-T-F 3349A-T-BE-F 3549A-T-BE-F Trim description 360L 360L-BE 360T 360T-BE Base size 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) Grip size — — — — Projection 3" (76mm) 3" (76mm) 113/16" (46mm) 113/16" (46mm) ANSI function 08 or 09 field selectable — 11 or 12 field selectable — Cylinder type 1 /4" Mortise — 1 1 /4" Mortise — Handing Handed/Reversible Handed/Reversible — — — E360L-BE — E360T-BE Optional trim 1 3349A-F/3549A-F Concealed vertical cable fire exit device Exit only no outside trim Optional trim Nominal door opening height Top cable part number Bottom cable part number 47250178 *82" - 96" *6'10" - 8' 47250175 >96" - 110" >8'0" - 9' 2" 47250176 47250179 >110" - 120" >9'2" - 10' 47250177 47250180 *Default door opening height. Specify door opening height if other than the default. For door heights less than 6'10" and greater than 10', contact our Customer Care department to discuss your specific application needs. Door opening height is distance from bottom of frame header to finished floor. See table on left for standard offering. Von Duprin 33A/35A Series • 27 3350AWDC/3550AWDC Wood door concealed vertical cable device Top latch 3350AWDC/3550AWDC Concealed vertical cable device 338 Filler plate (retrofit bracket) 3350AWDC and 3550AWDC for use on single and double wood doors, UL listed for panic exit hardware. Devices are ANSI A156.3 – 2008 Grade 1. The 3549A has a smooth mechanism case and the 3350AWDC has grooved case. The concealed vertical cable device is non-handed except when the SS (signal switch) option is used. See opposite page for available outside trim and device functions. Center slide 150 Top strike 3350AWDC/3550AWDC fits door stiles as narrow as 2 1/8" (44 mm). Scalp Plate – Device is furnished standard with an 15" (381 mm) long scalp plate for easy access to cables. Finishes – US3, US3A, US4, US4A, US10, US15 (3550AWDC Only), US26, US26D, US26D-AM Antimicrobial, US28, 313, 315 and 643E. Specifications Device lengths Device centerline from finished floor 2' 2' (610 mm) Door size 3' 2'4" to 3' (660mm to 914 mm) door size 4' 2'8" to 4' (813 mm to 1219 mm) door size 39 13/16" (1006mm) Center case dimensions 8 13/16" x 2 13/32" x 1 9/16" (208mm x 62mm x 40mm) Mechanism case dimensions 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm) Pushbar depressed – 3 1/16" (78 mm) Deadlocking anti-friction top & bottom bolt 1/2" (13mm) throw Latch bolt Door undercut 3 Top & bottom latch 5 13/16" x 1 1/4" x 1 7/16" (147mm x 32mm x 37mm) 7 /32" (6mm) Diameter stainless steel cables Vertical cables Fasteners & sex bolts (SNB) Electric options Miscellaneous options Dogging feature Strikes /4" (19mm) Maximum Includes 1 3/4" (44mm) – 2 1/4" (57mm) wood doors #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device) ALK Alarm kit CX Chexit delayed exit EL Electric latch retraction HD-EL Electric latch retraction with hex dogging QEL Quiet electric latch retraction RX Request to exit, WP-RX waterproof option * LX Latchbolt monitoring * LX-RX Request to exit / latchbolt monitoring * RX-LC, LX-LC, LX-RX-LC Low current option for RX, LX, LX-RX SS Signal switch CON Allegion Connect GBK Glass bead kit PL Pullman latch PN Pneumatic INS-2/INS-4 Insulclad Kits 1/2" / 1/4" panels LBL Less bottom latch SG Safety glow SEC Security screws SNB Sex bolts Hex dogging standard CD Cylinder dogging LD Less dogging Top – 150 Bottom – 450 *For 33/3550AWDC devices, LX switch monitors trim input or electric dogging of EL/QEL devices. LX switch does not monitor latchbolt condition. 28 • Von Duprin 33A/35A Series 450 Bottom strike Bottom latch QEL PN Quiet electric latch retraction • Bolt retraction via switch • Converts exit door to push-pull operation Pneumatic latch retraction • For areas where electrical devices banned • Special linkage for mechanical or pneumatic dogging E (E360L) ALK Electric lever trim • Electrified remote locking/unlocking • Fail safe & fail secure options available • No key override Alarm exit kit • Unauthorized opening triggers 85-decibel horn • Set in armed or disarmed mode by key EL CON Electric latch retraction • Enables remote unlatching • Alternative to manual dogging Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply DI RX Dogging Indicator • Monitor dogging status without a control panel • Red indicator light shows visibility to dogging from over 75 feet Pushpad monitor switch • Signals use of an opening • SPDT switch to monitor pushpad CD Cylinder dogging • Replaces hex key dogging • Requires standard 1 1/4" mortise cylinder Standard trim EO DT NL NL-OP Dummy trim pull when dogged Night latch key retracts latchbolt Night latch key retracts latchbolt optional pull required Product description 3350AWDC-EO 3550AWDC-EO 33950AWDC-DT 3550AWDC-DT 3350AWDC-NL 3550AWDC-NL 3350AWDC-NL-OP 3550AWDC-NL-OP Trim description — 386DT 386NL 388 — 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 11/16" (190x43mm) — 8 1/2" x 4 5/16" (216x110mm) 8 1/2" x 4 5/16" (216x110mm) — Base size Grip size Projection — 2 7/16" (62mm) 2 7/16" (62mm) 1" (25mm) ANSI function 01 02 03 03 Cylinder type — — Rim Rim Handing — — Handed — — x 360L-DT x 550DT x IVES 8190 — x 550DT x IVES 8190 10" L L-BE T T-BE Lever key locks and unlocks Lever blank escutcheon always operable (no cylinder) Thumbturn key locks and unlocks (behind C/case) Thumbturn always operable (no cylinder) (behind C/case) Product description 3350AWDC-L 3550AWDC-L 3350AWDCA-L-BE 3550AWDC-L-BE 3350AWDC-T 3550AWDC-T 3350AWDC-T-BE 3550AWDC-T-BE Trim description 360L 360L-BE 360T 360T-BE Base size 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) Grip size — — — — Projection 3" (76mm) 3" (76mm) 113/16" (46mm) 113/16" (46mm) ANSI function 08 or 09 field selectable — 11 or 12 field selectable — Cylinder type 1 /4" Mortise — 1 1 /4" Mortise — Handing Handed/Reversible Handed/Reversible — — — E360L-BE — E360T-BE Optional trim 1 3349A/3549A Concealed vertical cable device Exit only no outside trim Optional trim Standard door opening height Feet (Inches) 6'8" - 7' (72" - 84") 7'1" - 8' (85" - 96") 8'1" - 9' (97" - 108") 9'1" - 10' (109" - 120") Door Opening Height is measured from finished floor to frame rabbet on door side. See table on left for standard offering. Note: Non-standard sizes available with extended lead time. Consult Customer Care for more information 1-877-671-7011. Von Duprin 33A/35A Series • 29 3350AWDC-F/3550AWDC-F Concealed vertical cable fire exit device Top latch 3350AWDC-F/3550AWDC-F Concealed vertical cable fire exit device 338 Filler plate (retrofit bracket) 3350AWDC-F and 3550AWDC-F for use on single and double wood doors up to 8' x 10' (2438mm x 2540mm), UL listed for fire exit hardware. See page 47 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2008 Grade 1. The 3550AWDC-F has a smooth mechanism case and the 3350AWDC-F has grooved case. The concealed vertical cable device is non-handed except when the SS (signal switch) option is used. See opposite page for available outside trim and device functions. Center slide 150 Top strike 3350AWDC-F/3550AWDC-F fits narrow stile doors. Scalp Plate – Device is furnished standard with an 15" (381 mm) long scalp plate for easy access to cables. Finishes – US3, US3A, US4, US4A, US10, US15 (3550AWDC Only), US26, US26D, US26D-AM Antimicrobial, US28, 313, 315 and 643E. Specifications Device lengths 2' 2' (610 mm) Door size 3' 2'4" to 3' (660mm to 914 mm) door size 4' 2'8" to 4' (813 mm to 1219 mm) door size Device centerline from finished floor 39 13/16" (1006mm) Standard Center case dimensions 8 13/16" x 2 13/32" x 1 9/16" (208mm x 62mm x 40mm) Mechanism case dimensions 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm) Pushbar depressed – 3 1/16" (78 mm) Latch bolt Deadlocking anti-friction top & bottom bolt /2" (13mm) throw 1 /4" (19mm) Maximum Door undercut 3 Top & bottom latch 5 13/16" x 1 1/4" x 1 7/16" (147mm x 32mm x 37mm) Vertical cables 7 Fasteners & sex bolts (SNB) Includes 1 3/4" (44mm) – 2 1/4" (57mm) wood doors #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device) Electric options ALK Alarm kit CX Chexit delayed exit EL Electric latch retraction HD-EL Electric latch retraction with hex dogging QEL Quiet electric latch retraction RX Request to exit, WP-RX waterproof option * LX Latchbolt monitoring * LX-RX Request to exit / latchbolt monitoring * RX-LC, LX-LC, LX-RX-LC Low current option for RX, LX, LX-RX SS Signal switch CON Allegion Connect /32" (6mm) Diameter stainless steel cables Miscellaneous options GBK Glass bead kit PN Pneumatic LBL Less bottom latch SG Safety glow SEC Security screws SNB Sex bolts Strikes Top – 150 Bottom – 450 *For 33/3550AWDC devices, LX switch monitors trim input or electric dogging of EL/QEL devices. LX switch does not monitor latchbolt condition. 30 • Von Duprin 33A/35A Series 450 Bottom strike Bottom latch QEL PN Quiet electric latch retraction • Bolt retraction via switch • Converts exit door to push-pull operation Pneumatic latch retraction • For areas where electrical devices banned • Special linkage for mechanical or pneumatic dogging E (E360L) ALK Electric lever trim • Electrified remote locking/unlocking • Fail safe & fail secure options available • No key override Alarm exit kit • Unauthorized opening triggers 85-decibel horn • Set in armed or disarmed mode by key EL SG Electric latch retraction • Enables remote unlatching • Alternative to manual dogging Safety glow • Self illuminating touchpad • No batteries or electronics CON RX Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply Pushpad monitor switch • Signals use of an opening • SPDT switch to monitor pushpad Standard trim EO DT NL NL-OP Dummy trim pull when dogged Night latch key retracts latchbolt Night latch key retracts latchbolt optional pull required Product description 3350AWDC-EO-F 3550AWDC-EO-F 3350AWDC-DT-F 3550AWDC-DT-F 3350AWDC-NL-F 3550AWDC-NL-F 3350AWDC-NL-OP-F 3550AWDC-NL-OP-F Trim description — 386DT 386NL 388 — 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 5/8" (190x41mm) 7 15/32" x 1 11/16" (190x43mm) — 8 1/2" x 4 5/16" (216x110mm) 8 1/2" x 4 5/16" (216x110mm) — Base size Grip size Projection — 2 7/16" (62mm) 2 7/16" (62mm) 1" (25mm) ANSI function 01 02 03 03 Cylinder type — — Rim Rim Handing — — Handed — — x 360L-DT x 550DT x IVES 8190 — x 550DT x IVES 8190 10" L L-BE T T-BE Lever key locks and unlocks Lever blank escutcheon always operable (no cylinder) Thumbturn key locks and unlocks (behind C/case) Thumbturn always operable (no cylinder) (behind C/case) Product description 3350AWDC-L-F 3550AWDC-L-F 3350AWDC-L-BE-F 3550AWDC-L-BE-F 3350AWDC-T-F 3550AWDC-T-F 3350AWDC-T-BE-F 3550AWDC-T-BE-F Trim description 360L 360L-BE 360T 360T-BE Base size 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm) Grip size — — — — Projection 3" (76mm) 3" (76mm) 113/16" (46mm) 113/16" (46mm) ANSI function 08 or 09 field selectable — 11 or 12 field selectable — Cylinder type 1 /4" Mortise — 1 1 /4" Mortise — Handing Handed/Reversible Handed/Reversible — — — E360L-BE — E360T-BE Optional trim 1 3349A-F/3549A-F Concealed vertical cable fire exit device Exit only no outside trim Optional trim Standard door opening height Feet (Inches) 6'8" - 7' (72" - 84") 7'1" - 8' (85" - 96") 8'1" - 9' (97" - 108") 9'1" - 10' (109" - 120") Door opening height is measured from finished floor to frame rabbet on door side. See table on left for standard offering. Note: Non-standard sizes available with extended lead time. Consult Customer Care for more information 1-877-671-7011. Von Duprin 33A/35A Series • 31 33A/35A Optional trim Lever Pull when dogged Trim description 360L-DT Night latch key retracts latchbolt Night Latch key retracts latchbolt Thumbturn key locks & unlocks Thumbturn key locks & unlocks 388 x 550DT 388 x IVES 8190 10" 360T x 550DT 360T x IVES 8190 10" Base size 7 1/2 x 1 11/16" x 7/8" (190x43mmx22mm) 7 1/2 x 1 11/16" (190x43mm) 7 1/2 x 1 11/16" (190x43mm) 7 1/2 x 1 11/16" x 7/8" (190x43mmx22mm) 7 1/2 x 1 11/16" x 7/8" (190x43mmx22mm) Grip size — 10" center to center 10" center to center 10" center to center 10" center to center Projection 3" (76mm) 1" (25mm) 1" (25mm) 1 13/16" (46mm) 1 13/16" (46mm) 02 03 03 11/12 Field selectable 11/12 Field selectable — Rim Rim 1 1/4" Mortise 1 1/4" Mortise Handing Handed / Reversible — — — — 33A/35A Trim selection ANSI function Cylinder type 32 • Von Duprin 33A/35A Series 33A/35A Optional trim Thumbturn-blank escutcheon always operable (no cylinder) Thumbturn-blank escutcheon always operable (no cylinder) Thumbturn key locks & unlocks Thumbturn-blank escutcheon always operable (no cylinder) 374T-BE/376T-BE x 8190 10" 392-6 Offset pull 360T-BE x 550 DT 360T-BE x 8190 10" 374T/376T x 8190 10" Base size 7 1/2 x 1 11/16" x 7/8" (190x43mmx22mm) 7 1/2 x 1 11/16" x 7/8" (190x43mmx22mm) 7 1/2 x 1 11/16" x 7/8" (190x43mmx22mm) 7 1/2 x 1 11/16" x 7/8" (190x43mmx22mm) 7 x 3 1/2" x 3/4" (178x89mmx19mm) Grip size 11 9/16" center to center 1" center to center 8 1/2" x 4 5/16" (216x110mm) 8 1/2" x 4 5/16" (216x110mm) 61/4" center to center Projection 113/16" (46mm) 113/16" (46mm) 113/16" (46mm) 113/16" (46mm) 2 1/4" ANSI function Trim description — — 11-12 Field selectable — — Cylinder type — — 1 1 /4" Mortise — — Handing — — — — — 33A/35A Optional trim Note: 360L & 360T used on Wood Door require the 33A-WDA cover plate 376T used on Wood Door require #10-WDA cover plate Von Duprin 33A/35A Series • 33 33A/35A Strike/Stile information Device type Standard single door 33A/35A Strike/Stile information Strike Standard double door Stile Strike w/mullion Optional single door Stile 33A 35A 1439 2" (51mm) 1408 x 5754 3327A 3527A 266 (Top) 304L (Bottom) 248-L (Bottom) 2 /8" (54mm) 266 (Top) 304L (Bottom) 1 3/4" (44mm) 248-L (Bottom) 3327A-F 3527A-F — — 3327A-LBR-F — — 338 (Top) 385A (Bottom) 21/8" (54mm) 338 (Top) 1 3/4" (44mm) 385A (Bottom) — — 338 (Top) — 3347A 3547A 3348A 3548A 3347A-F 3547A-F 3348A-F 3548A-F 3347A-LBR 3547A-LBR 3348A-LBR 3548A-LBR 3347A-LBR-F 3547A-LBR-F 3349A 3549A 3349A-F 3549A-F 3349A-LBL 3549A-LBL 3349A-LBL-F 3549A-LBL-F 1 299F (Top) 304L (Bottom) 499F (Top) (Req. auxiliary fire latch) 2" (51mm) Optional double door Strike Stile Strike w/mullion Stile 299 1410 1606 2 /4" (70mm) 1 3/4" (44mm) 21/2" (64mm) 299 x 5654 299 x 4954 1606 x 1654 25/8" (67mm) 35/16" (84mm) 23/4" (70mm) 299 (Top) 385A (Bottom) 260U (Top) 385A (Bottom) 3 31/8" (79mm) 21/8" (54mm) 299 (Top) 385A (Bottom) 260U (Top) 385A (Bottom) 31/8" (79mm) 21/8" (54mm) 2 3/16" (56mm) — — — — 3 5/8" (92mm) — — — — 304L (Bottom) 21/2" (64mm) 304L (Bottom) 21/2" (64mm) 338 (Top) 31/2" (89mm) 385A (Bottom) — — 304L (Bottom) 31/2" (89mm) 21/2" (64mm) 338 (Top) 21/2" (64mm) — — — — — 338 (Top) 35/8" (92mm) — — — — 1 3/4" (44mm) — — — — 31/2" (89mm) — — — — 249 (Top) 349 (Bottom) 21/2" (64mm) — — 249 (Top) 349 (Bottom) 249 (Top) 349 (Bottom) 249 (Top) 1 2 /2" (64mm) 249 (Top) 2 /2" (64mm) — — — — — — 249 (Top) 35/8" (92mm) — — — — 34• Von Duprin 33A/35A Series 34 1 33A/35A Strike/Stile information Strikes for rim devices 299 1408 1410 — Integral stop Projection 13/16" (21mm) One per pair of doors - use with 5754 Mullion only Projection 1/2" (13mm) 1439 1606 1609 Projection 1/2" (13mm) Projection 3/8" (10mm) For rim/vertical rod combination -not fire rated 33A/35A Strike/Stile information Strikes for vertical cable devices 249 - Top strike 349 349 - Bottom strike 249 1" (25 mm) 1¹⁹⁄₃₂" (40 mm) 1¹⁄₂" (38 mm) 2³⁄₄" (70 mm) ⁹⁄₁₆" (14 mm) ¹⁄₈" (3 mm) Projection 9/16" (14mm) ¹⁄₈" (3 mm) Projection 1/8" (3mm) Strikes for vertical rod devices 260U-Flush transom only Projection 3/8" (10mm) 266 Projection 1 1/4" (32mm) 299 299F Projection 13/16" (21mm) Projection 13/16" (21mm) 304L 338 385A 499F Mortise 13/16" (21mm) Mortise 5/8" (16mm) Mortise 2 1/2" (64mm) Projection 13/16" (21mm) 35 Von Duprin 33A/35A Series • 35 Grade, type and function options Grade, type and function options ANSI function, grade & type Function Grade 1, type 4 Grade 1, type 5 Grade 1, type 6, 7 & 8 01 33AEO 35AEO 3327A-EO 3327A-EO-F 3527A-EO 3527A-EO-F 3347A-EO 3347A-EO-F 3348A-EO 3348A-EO-F 3349A-EO 3349A-EO-F 3547A-EO 3547A-EO-F 3548A-EO 3548A-EO-F 3549A-EO 3549A-EO-F 02 33A-DT 35A-DT 3327A-DT 3527A-DT 3347A-DT 3348A-DT 3349A-DT 3547A-DT 3548A-DT 3549A-DT 03 33A-NL 33A-NL-OP 35A-NL 35A-NL-OP 3327A-NL-OP 3527A-NL-OP 3327A-NL-OP-F 3527A-NL-OP-F 3527A-NL 3327A-NL-F 3527A-NL 3527A-NL-F 3347A-NL-OP 3347A-NL-OP-F 3348A-NL-OP 3348A-NL-OP-F 3347A-NL 3347-NL-F 3348-NL 3348-NL-F 3349A-NL-OP 3349A-NL-OP-F 3349A-NL 3349A-NL-F 3547A-NL-OP 3547A-NL-OP-F 3548A-NL-OP 3548A-NL-OP-F 3547A-NL 3547-NL-F 3548-NL 3548-NL-F 3549A-NL-OP 3549A-NL-OP-F 3549A-NL 3549A-NL-F 08-09 33A-L 35A-L 3327A-L 3327A-L-F 3527A-L 3527A-L-F 3347A-L 3347A-L-F 3348A-L 3348A-L-F 3349A-L 3349A-L-F 3547A-L 3547A-L-F 3548A-L 3548A-L-F 3549A-L 3549A-L-F 11-12 33A-TL 35A-TL 3327A-TL 3327A-TL-F 3527A-TL 3527A-TL-F 3347A-TL 3347A-TL-F 3348A-TL 3348A-TL-F 3547A-TL 3547A-TL-F 3548A-TL 3548A-TL-F Dimensions 1 9/16" (40mm) 2 13/32" 8 3/16" (208mm) (62mm) 35 3/8" (838mm) 47 3/8" (1118mm) 18" (457mm) 24" (610mm) 2 3/16" (56mm) 36• Von Duprin 33A/35A Series 36 2 1/4" (57mm) Neutral: 3 13/16" (97mm) Depressed: 33 13/16" (78mm) 33A/35A Electrical options ALK Alarm kit RX Request to exit The ALK battery alarm kit is a simple yet effective way to deter unauthorized use of an opening. While the exit device is still a means of egress, the ALK kit contains an internal horn. When the touch bar is depressed, the horn sounds to provide an audible means of signaling that the opening has been violated. The alarm kit can be armed or disarmed by key. Thus allowing the exit device to be set in an armed or disarmed mode. The horn is rated at 85 decibel. The key switch uses a standard 1 1/4" (32mm) mortise cylinder with a straight cam (Schlage Cam reference B502-191). The unit operates on one standard 9-volt alkaline battery. When the battery is weak, the horn will emit an intermittent low battery alert signal. The RX feature is used to signal the use of an opening. This device is equipped with one internal SPDT switch which monitors the pushpad. The device can be connected to a security console, or may be used as a single door alarm when used with a horn and power supply. A continuous current electric transfer must be used for transferring power from the frame to the door. The RX switch option should not be used to control a load, but as a signalling switch (0.5 amps. resistive maximum). The RX switch is available in a low current (LC) switch. Most commonly used in computer operated monitoring systems. To order, specify: 1. Standard – Use prefix RX, example RX33AEO 2. Low Current – Use prefix RX-LC, example RX-LC35AEO The ALK is available in two styles, 33A ALK, grooved cover and 35A ALK, smooth cover. To order, specify: 1. Standard – Use prefix RX2, example RX233AEO The ALK includes “EMERGENCY EXIT ONLY. ALARM WILL SOUND” decal for application on door, or the RSS push bar trim can be used instead of the door decal,specify RSS push bar trim. LX Latch Bolt monitoring The External Inhibit comes standard on Von Duprin exit devices. External Inhibit (EI) allows for the use of external switch to be used to arm, disarm and reset the alarm. Auto Reset (AR) is an option that rearms the alarm after a preset time. AR is available in three field selectable times – 1¹⁄₂, 3 or 4¹⁄₂ minutes. When the ALK is used, standard dogging is removed. If cylinder dogging is required for 3' or 4' doors the ALK can be moved to the hinge side of the device and standard cylinder dogging can be added. To order, specify: 1. Standard, 33A ALK 2. Cylinder Dogging, CD33A ALK The RX2 feature uses 2 RX switches. The LX feature is used to signal the use of an opening. This device is equipped with one internal SPDT switch which monitors the latch bolt. The device can be connected to a security console, or may be used as a single door alarm when used with a horn and power supply. A continuous current electric transfer must be used for transferring power from the frame to the door. The LX switch option should not be used to control a load, but as a signalling switch (0.5 amps. resistive maximum). The LX switch is available in a low current (LC) switch. Most commonly used in computer operated monitoring systems. Minimum door sizes Device RX2 Double request to exit 33A/35A Electrical options Also can be powered using the PS902 power supply. See PS902 for additional information. Alarm kits are available with a choice of two switch kits, RX or LX. RX monitors the touchpad and is furnished standard. LX optional latch bolt monitoring is recommended for use with surface vertical rod exit devices. Specify ALK-LX. To order, specify: 1. Standard – Use prefix LX, example LX33AEO 2. Low Current – Use prefix LX-LC, example LX-LC35AEO 33A/35A 3' (914mm) Length 2'9" (838mm) 4' (1219mm) Length 3'3" (991mm) 3327A/3527A 2'8" (813mm) 3'2" (966mm) 3347A/3347A-F 3547A/3547A-F Electrical rating for all switches: 2'8" (813mm) 3'2" (966mm) • Standard – 2 Amp maximum @ 24VDC 3348A/3348A-F 3548A/3548A-F • Low Current (LC) - below 50 Milliamps @ 24VDC 2'8" (813mm) 3'2" (966mm) Note: All switches can be either factory or field installed 37 Von Duprin 33A/35A Series • 37 33A/35A Chexit device CX The Chexit® (with motor driven blocking actuator)* Minimum door opening sizes for CX devices Consult factory for other size requirements. The Von Duprin Chexit device is designed for controlled egress applications. It meets both life safety and security needs, as well as the requirements of NFPA 101 for "Special Locking Arrangement" and IBC "Special Egress-Control Devices". All control inputs, auxiliary locking, local alarm and remote signaling outputs are self-contained in the Chexit assembly. Numerous configurable options allow the device to be customized for the specific code or application requirements. The standard Chexit device sounds an alarm and keeps the door secured for 15 seconds following an exit attempt with immediate release upon fire. Electrical options & accessories The Chexit device includes a 6" x 20" decal for application on door. Device 3' (914mm) Length 4' (1219mm) Length CX33A/35A 2'10 3/4" (883mm) 3'4 3/4" (1035mm) CX3327A/3327A-F/3527A/3527A-F 2'10 1/4" (870mm) 3'4 1/4" (1022mm) CX3347A/3347A-F/3547A/3547A-F 2'10 1/4" (870mm) 3'4 1/4" (1022mm) CX3348A/3348A-F/3548A/3548A-F 2'10 1/4" (870mm) 3'4 1/4" (1022mm) CX3349A/3349A-F/3549A/3549A-F 2'10 1/4" (870mm) 3'4 1/4" (1022mm) 2'10 1/4" (870mm) 3'4 1/4" (1022mm) CX3350/3350WDC-F/ 3550/3550WDC-F Specifications / Power supply requirements* Input voltage – 24VDC Input current inrush – 1.25A Input current holding – 390mA Alarm relay and Secure relay contact ratings – 24VDC, 1A Fire alarm, Inhibit and Door position switch inputs require normally closed dry contacts. “PUSH UNTIL ALARM SOUNDS. DOOR CAN BE OPENED IN 15 SECONDS” Power supply information for CX devices with motor driven blocking actuator*. Chexit typical applications Chexit single door with options – The Chexit is used as an access control device. The card reader allows access. Also shown in this application is an external horn and door position switch. The auxiliary horn is used for increased volume in remote locations. Using a door position switch gives added security to the opening in case the door is not reclosed. With the Chexit disarmed, the opening functions as a normal exit device. If card readers are required on both sides of the door, the normally closed contacts of the readers should be wired in series. ** Power supply Maximum number of devices PS902 (up to 2 amps) 1 Chexit device PS904 (up to 4 amps) 3 Chexit devices PS906 (up to 6 amps) 4 Chexit devices PS914 (up to 4 amps) 4 Chexit devices When powering multiple components, verify that the amperage requirements of all components combined does not exceed the power supply output rating, see table above for output ratings. Consult Installation Instructions for proper wire gauge and wire run requirements. Exceeding the recommended devices and/or not following Installation Instructions may void your warranty. Call Customer Care at 877-671-7011 or visit the Allegion website for more information - www.us.allegion.com. How to order* To order, specify: 1. Prefix product description number “CX”. Example: CX33A-L 2. Specify option (see options on page 38). Example: CX-RCM 3. Door size other than 3' (914mm). 4. Door thickness other than 1 3/4" (45mm). 5. Finish. *Note: Chexit devices built after August 24, 2015 are built using motor driven blocking actuators that have decreased power supply and operating requirements. The information listed in this catalog references the power supply and operating requirements that are needed for the new products with motor driven blocking actuators. For information on devices built previous to August 24, 2015, please contact Customer Care at 877-671-7011. **Note: PS902 is not to be used for double door Chexit applications. Figure 1. Riser Diagram, Single Door 38• Von Duprin 33A/35A Series 38 33/35 Chexit, RCM and DE5300 features The Chexit, Remote Chexit Module (RCM) or DE5300 devices have several features and options available to fit your applications. See below for more information. Inputs & Outputs Fire Alarm Input This input releases the door immediately upon a fire alarm allowing immediate egress. The Internal Alarm can be silenced during a fire input via an onboard switch setting. Inhibit Input (Access Control) This optional input is provided to allow authorized egress or entry when the device is Armed using an external card reader, Key Switch, etc. It also allows remote reset of the Chexit, RCM or DE5300 in an alarmed condition. The ability to reset alarms with the inhibit input can be disabled via an onboard switch setting. Door Position Switch Input An optional Door Position Switch (DPS) can provide door position status to Chexit, RCM or DE5300 for additional security, ensuring that the door is closed, and can cause alarm when the door is left or forced open. Alarm Relay Contacts The Alarm Relay contacts are provided as a means to control a Remote Alarm, such as a horn or lamp, or signal an external monitor. The contacts can be configured with a jumper as Normally Open or Normally Closed, and become active upon entering an alarmed condition. Secure Relay Contacts The Secure Relay contacts are provided as a means to signal an external monitor. The contacts can be configured as Normally Open or Normally Closed with a jumper, and become active when the DPS indicates the door is closed and the Push Pad is locked. Delays Release Delay When the Push Pad is pushed and the Nuisance Delay expires, the Chexit, RCM or DE5300 enters the Release Delay with alarm. During the Release Delay, the Internal Alarm sounds, the Alarm Relay activates, and the Chexit/RCM keeps the Push Pad or DE5300 magnetic lock, locked for 15 seconds (less any time already elapsed during the Nuisance Delay). Once started, the Release Delay sequence will not stop and the devices will unlock. Nuisance Delay When a Chexit, RCM or DE5300 is located in a public area, it can be desirable to limit false releases when the Push Pad is accidently pushed. The Nuisance Delay is the brief time a Push Pad can be accidently pushed before the Release Delay sequence starts. If the Nuisance Time is set to 0 seconds the Chexit, RCM or DE5300 will enter Release Delay as soon as the Push Pad is pushed (when armed). Setting the Nuisance Time to 1, 2, or 3 seconds allows the Push Pad to be pressed for 1 to 3 seconds before the Chexit, RCM or DE5300 goes into Release Delay. If the Nuisance Audio and Nuisance Delay are both on, the Internal Alarm will pulse during the Nuisance Delay. The Alarm Relay does not activate during the Nuisance Delay. If the Push Pad is released before the Nuisance Delay expires, the Chexit, RCM or DE5300 will remain armed. DPS Delay If the DPS detects that the door closed during the Rearm Delay, the Chexit, RCM or DE5300 ends the Rearm Delay and allows 2 seconds for the latch to clear the strike before rearming. Interface Key Switch The Key Switch provides the means to Arm or Disarm/Reset the Chexit, RCM or DE5300. Turning the Key Switch clockwise initiates the Rearm Delay, and turning the Key Switch counterclockwise Disarms/Resets the Chexit, RCM or DE5300. The Key Switch allows the key to be removed in either the Arm or the Disarm/Reset position. Status Indicator The red Status Indicator displays the status of the Chexit, RCM or DE5300. The Status Indicator flashes slow if the Chexit, RCM or DE5300 is armed, flashes fast in an alarmed mode, is off when inhibited and on solid during Rearm Delay. Internal Alarm The Internal Alarm sounds the status of the Chexit, RCM or DE5300. The Internal Alarm sounds continuously during and after a fire alarm or a Release Delay, pulses fast during the Nuisance Delay or a tamper and pulses slow during Disarmed Powerup mode. Settings Armed Powerup When set to OFF, a power disruption and power return will put the Chexit, RCM or DE5300 in a disarmed, unlocked alarm mode. Trim Fail Safe / Fail Secure (FS/FSE) The trim input power can be set to FS (Fail Safe; locked when energized, unlocked when deenergized or during power failure) or FSE (Fail Secure; unlocked when energized, locked when deenergized or during power failure). Electrical options & accessories Gang Bus The Gang bus allows a Chexit, RCM or DE5300 device to signal other Chexit, RCM or DE5300 devices when it enters the Release Delay, allowing multiple doors to release at the same time in an emergency. Up to 8 devices may be connected to the Gang Bus. Rearm Delay The Rearm Delay is the amount of time after the Key Switch or Inhibit Input is deactivated to when the device rearms. It is designed to give someone time to pass through the door before rearming occurs. The Rearm Time can be changed via the onboard switch settings from 0 and 28 seconds in 2 second increments. If the Rearm Time is set to 30 seconds and a DPS is used, if the door is opened and the Rearm Time expires, there will be no alarm. The Chexit, RCM or DE5300 will rearm after the door is closed. If the door never opens, the Chexit, RCM or DE5300 will rearm after 30 seconds. If not using a DPS, the Chexit, RCM or DE5300 will always rearm in 30 seconds. The trim must be bought or modified to physically function as FS or FSE. This on board setting only selects the trim input power. 39 Von Duprin 33A/35A Series • 39 33A/35A Chexit options DE5300 Delayed Egress System RCM Remote Chexit Module — is designed to provide the concept of the Chexit delayed exit system for door sizes smaller than the standard Chexit device can accommodate. The Chexit module is installed in a control box and mounted in a remote location. Features and functions of the standard Chexit exit device are available on the Remote Chexit Module. DE5300 Delayed Egress System — is designed for controlled egress applications when used in conjunction with a magnetic lock. It meets both life safety and security needs, as well as the requirements of NFPA for "Special Locking Arrangement" and IBC "Special Egress-Control Devices". All control units, auxiliary locking, local alarm and remote signaling outputs are selfcontained in the DE5300 assembly. The DE5300 is commonly used on narrow stile doors where a standard or narrow stile Chexit is not practical. DE5300 Delayed Exit System uses a Chexit logic board and a Von Duprin RX-LC (low current request to exit) panic device to control a Schlage Electronics Direct Hold Magnetic Lock. RCM Module Minimum door opening sizes for RCM devices Electrical options & accessories Consult factory for other size requirements. Device 3' (914mm) Length 4' (1219mm) Length CX-RCM33A/35A 2'5" (737mm) 2'11" (889mm) CX-RCM3327A/3327A-F /3527A/3527A-F 2'4 1/2" (724mm) 2'10 1/2" (876mm) CX-RCM3347A/3347A-F /3547A/3547A-F 2'4 1/2" (724mm) 2'10 1/2" (876mm) CX-RCM3348A/3348A-F /3548A/3548A-F 2'4 1/2" (724mm) 2'10 1/2" (876mm) CX-RCM3349A/3349A-F /3549A/3549A-F 2'4 1/2" (724mm) 2'10 1/2" (876mm) CX3350/3350WDC-F/ 3550/3550WDC-F 2'4 1/2" (724mm) 2'10 1/2" (876mm) DE5300 Module The Chexit module for the DE5300 is installed in a control box and mounted in the wall adjacent to the door. Features and functions of the standard Chexit exit device are available on the DE5300. The DE5300 device includes a 6" x 20" decal for application on door. “PUSH UNTIL ALARM SOUNDS. DOOR CAN BE OPENED IN 15 SECONDS” Cylinders — Cylinders are not furnished with the DE5300 and must be specified when ordering. Use 11/4” mortise cylinder with compression ring K510-406 with straight cam and orient cam as shown. Schlage cylinder 20-001-114 recommended for the device and the CD cylinder dogging option. See Schlage Pricebook for additional information. Specifications / Power supply requirements* Size – 3.75" x 5.57" x 2.50" Input voltage – 24VDC Input current inrush – 1.25A Input current holding – 390mA Alarm relay and Secure relay contact ratings – 24VDC, 1A Fire alarm, Inhibit and Door position switch inputs require normally closed dry contacts. Specifications / Power supply requirements Size - 3.75" x 5.57" x 2.50" Input voltage – 24VDC Cylinders — Cylinders are not furnished with the Chexit device and must be specified when ordering. Use 11/4” mortise cylinder with compression ring K510-406 with straight cam and orient cam as shown. Schlage cylinder 20-001-114 recommended for the device and the CD cylinder dogging option. See Schlage Pricebook for additional information. Input current – 1A Alarm relay and Secure relay contact ratings – 24VDC, 1A Fire alarm, Inhibit and Door position switch inputs require normally closed dry contacts. How to order To order, specify: 1. DE5300 2. M420/P, M450/P, or M490/P magnetic lock (order direct from Schlage Electronics). 3. RX-LC 22/33A/35A/98/99 device. 4. PS900 Series 5. EPT-2/10 How to order* To fire alarm contact 2 x 18 AWG See Chexit "How to order" on page 36. *Note: RCM modules built after August 24, 2015 are built using motor driven blocking actuators that have decreased power supply and operating requirements. The information listed in this catalog references the power supply and operating requirements that are needed for the new products with motor driven blocking actuators. For information on devices built previous to August 24, 2015, please contact Customer Care 902, 904, 906, 2 x 18 or 914 Power supply To secure status 2 x 18 AWG 2 x 18 AWG Remote Alarm Junction box 2 x 18 AWG (plus power if required) 5 x 18 AWG at 877-671-7011. Magnetic Lock 15 x 18 AWG 2 x 18 AWG DE5300 EPT2/10 RXLC Exit Device Card Reader 1. See step 6l for conduit knockout locations that can be used. 2. Trim wires not shown on diagram, add them as needed. 40• Von Duprin 33A/35A Series 40 AC input (See power supply instructions for AC input requirements) Figure 1. Riser Diagram, Single Figure 1. Riser Diagram, Single DoorDoor 33A/35A Electrical options QEL Quiet electric latch retraction EL Electric latch retraction QEL devices are also useful with automatic door operators, and may be applied to fire-rated applications when under the control of an automatic fire alarm system. EL devices are also useful with automatic door operators, and may be applied to fire-rated applications when under the control of an automatic fire alarm system. UL approved for Class II circuit applications. The QEL feature allows for the remote unlatching of exit devices. A control station operator can flip a switch to retract the latch bolt and immediately change an exit door to push-pull operation. Different than the popular EL, the QEL quiet operation is achieved using an electric drive motor which retracts the latch bolt either momentary unlatching or for extended periods of time. This feature is an alternative to manual dogging. UL approved for Class II circuit applications. The QEL option does not include the power transfer from door to frame, the power supply, or the control operator. Refer to EPT-2 power transfer and the PS902 or 914 power supply. The PS902/914 with the 2RS, 4RL or 4R board is the minimum required. Other option boards available for other functions, see PS902/914 power supply for additional information. 1.0 A Inrush (0.5 sec.) 0.14 A Holding 2.0 A Calibrate (3 sec. one time) The PS914 with the 900-2RS option card is minimum option card required. Other option cards available for other functions, see PS914 power supply for additional information. PS872 Wiring PS872 Wiring To order, specify: 1. Standard – Use prefix EL, example EL33AL 2. Hex Key dogging – Use prefix HD-EL, example HD-EL33AL To order, specify: 1. Standard – Use prefix QEL, example QEL33A-L. Popular EL application Popular QEL application Popular application Power supply PS914-2RS Electric power transfer EPT-2 or EPT-10 Popular application Power supply PS902-2RS Electric power transfer EPT-2 or EPT-10 120/240 120 VAC 120/240 VAC VAC SC I1 O1 I2 O2 GND SC I1 O1 I2 O2 GND EPT-2 EPT-2 QEL #2 QEL #2 a* a* Input #2 (Required for independent operation only). b* Input #2 (Required for independent operation only). b* EPT-2 EPT-2 QEL #1 QEL #1 a* a* Input #1 QEL Device wire selection size Distance (one-way) 200 ft. Wire Gauge 18 AWG 320 ft. 16 AWG 500 ft. 14 AWG 800 ft. 12 AWG EL Device wire selection size Von Duprin exit device EL 33A/35A Rim a* b* Wire selection 1200 ft. Max. Input #1 b* b* a* Electrical options & accessories 24VDC Current The EL option does not include the power transfer from door to frame, the power supply, or the control operator. Refer to EPT-2 power transfer and the PS914 power supply. Solenoid specifications: Continuous Duty – 24 VDC Current Inrush – 16 Amps Current Holding – 0.3 Amps QEL Electrical load Voltage The EL feature allows for the remote unlatching of exit devices. A control station operator can flip a switch to retract the latch bolt and immediately change an exit door to push-pull operation. A powerful, continuous duty solenoid retracts the latch bolt, either for momentary unlatching, or for extended periods of time. The EL feature is an alternative to manual dogging. If manual hex-key dogging is required, specify HD-EL. Switch wire size 18 gauge standard b* All other EL33A/35A device types Control Switch EL Wire length (feet)1 Wire gauge (AWG) 0-500 12 0-300 14 0-200 0-250 16 12 0-150 14 0-100 16 0-1200 18 1. Wire lengths include an EPT, Door loop, electric hinge or pivot and are measured one way between the PS914/option board and the device. 2. Table is applicable to devices that have shipped after August 2012. 41 Von Duprin 33A/35A Series • 41 33A/35A Electrical accessories Power supplies Series PS902/914 PS902 PS904 PS906 PS914 Number of connectors on power supply for the 2 amps 4 amps 6 amps following: 4 amps Distribution boards 1 2 3 2 Battery back-up board 1 1 1 1 33A/35A Electrical options Note: One fire alarm board can be connected directly to the PS902. If a fire alarm board is desired for the PS904, PS906 or PS914 it can be connected to a distribution board. Overview: The PS900 Series is a consolidated line of power supplies and accessories that offer enhanced flexibility and functionality specific to the changing needs of the access control market. The PS900 Series can be used in a variety of applications to convert high voltage AC power into the low voltage DC outputs required by most access control devices. The PS900 Series protects devices downstream by providing Class 2*, filtered and regulated power. The full line is UL294 certified. Note: PS906 can provide Class 2 rated outputs when used with 900-8P distribution board. Applications: The PS900 Series of power supplies works with many electrified devices including Schlage electromagnetic locks, Schlage AD-Series hardwired locks, Schlage electrified mechanical locks, Von Duprin electrified strikes , Von Duprin exit devices, and many other brands. Accessories: The Schlage PS900 Series features seven option boards for use in a variety of applications. All Schlage PS900 Series power supplies option boards are UL 294 certified. Features: • Constant output rating at both 12 VDC and 24 VDC provides superior performance ; includes field selectable jumper Option boards: 900-4R: 4 relay controlled output board to power multiple devices • Polarized connectors for option boards eliminate need for racks and side connectors 900-4RL: 4 relay distribution board with logic is field configurable for time delay function, auto operator, security interlock • Flat mounting of option boards provides easier access to terminal blocks for connection of electrified devices • High voltage protective cover • Battery back-up board auto-selects voltage • Fire alarm relay can be configured to provide either switched or un-switched outputs from a power supply • PS914 designed with high in rush current for powering electrified panic devices • Universal 120-240 VAC input • Low voltage DC, regulated and filtered • Electronic power limiting foldback circuit for AC current overload protection • Fused primary input • AC status monitor- isolated SPDT contacts • AC input and DC output LED status indicators • Cover mounted AC input indication • Hinged cover with lock down screws Certifications: • UL 294 certified—the standard for access control • Class 2 rated* * Except PS906, output rating exceeds Class 2 power limits Once power is converted to low voltage DC, the PS900 Series offers a variety of distribution options, including basic fuse protection, simple relay, and advanced logic providing complex sequencing and timing functions. * PS906 can provide Class 2 rated outputs when used with 900-8P distribution board. 42• Von Duprin 33A/35A Series 42 900-8F: Provides 8 individually fuse-protected outputs, giving the flexibility to power multiple devices and provide another layer of protection 900-FA: Emergency interface relay integrates with fire alarm and is used to cut power in case of emergency 900-BB: Battery backup 900-2RS: 2 relay EL/QEL panic device control board (PS914 only) 900-BBK: Battery backup kit includes two 7A/hr batteries and provides up to four hours of backup power when cycled every 5 minutes at full load 33A/35A Electrical accessories EPT Electrical power transfer PNT Pneumatic transfer Allegion Connect Electric power transfer provides a means of transferring electrical power from a door frame to the edge of a swinging door. The units are completely concealed when the door is in the closed position, and are ideally suite for installations involving abuse or heavy traffic. Two models are available; EPT-2, two 18 gauge wires and EPT-10, ten 24 gauge wires. The EPT-2 and EPT-10 are U/L listed as “miscellaneous door accessory”. Pneumatic controls PNT-1 is available for pneumatic latch retraction exit devices. Appearance and dimensions are identical to EPT models. UL Listed for use on firedoors Door applications: Allegion’s cross-category Connect features common interconnect components to our electrified options. Allegion Connect is a quick and easy way to connect power sources; all the way from your power supply to locking device. There is no wire cutting; reducing installation and maintenance time ultimately cutting cost. After installation, Allegion’s Connect continues to provide benefits throughout the lifetime of the opening by offering a service kit for repairs or modifications in the future. Hinge type Door thickness Features and benefits Up to 5" butt hinges 1 3/4" • 0-180 Up to 3/4" offest pivots 1 3/4" 0-130 5 1/2" butt hinges 1 3/4" • Perfect Connections: these factory installed connectors ensure the right wires match up every time 0-110 6" butt hinges 1 3/4" 0-90 Swing clear hinges 1 3/4" Finishes SP28 (sprayed aluminum) SP313 (sprayed duranodic). Dimensions Housing 9" x 1 1/4" x 1 5/8" (229mm x 32mm x 38mm) EPT-2 Two 18 gauge wires, Up to 2 AMPS @ 24VDC, with a 16 AMPS Maximum Surge EPT-10 Ten 24 gauge wires, Up to 1 AMPS @ 24VDC, with a 16 AMPS Maximum Surge PNT-1 5 /32" Tubing To order, specify: 1. EPT-2 ,EPT-10 or PNT-1. 2. Finish, SP28 or SP313. Quick: common connections reducing installation time • Protective: the connectors protect the connection points throughout the installation process and lifetime of the opening • Interchangeable: all Allegion Connect products utilize the same connectors • Maintenance: you no longer need to cut away wire to disconnect Allegion products, also available is a service kit specifically for Connect products. Harness length 6 Inches 12 Inches 26 Inches 32 Inches 38 Inches 44 Inches 50 Inches 192 Inches Connectors on both ends CON-6 CON-12 CON-26 CON-32 CON-38 CON-44 CON-50 CON-192 Connectors on one end, crimped pins on the other end CON-6P CON-12P CON-26P CON-32P CON-38P CON-44P CON-50P CON-192P Power Supply Wire Harness = Connectors on one end, stripped leads on the other end, offering a direct connection to the power supply 6 Inches 33A/35A Electrical accessories Degree of opening 0-180 CON-6W - wire extension to power supply Consult door manufacturer for harness length requirements. Note: You will need to purchase a separate wiring harness to go from exit device to hinge/ EPT and an additional harness to go from hinge/EPT to power supply or access control system. Harness part numbers with ordering information can be located in the Schlage, Von Duprin and Falcon pricebooks. A service kit is available for order in the Schlage, Von Duprin and Falcon pricebooks. Included in this kit are male end plugs, female end plugs and pins to customize harnesses to your application. Note: Must be ordered with exit devices and locks How to order 1. Specify CON for Connect electronic options Example: EL-35-EO-CON (35 Series Electrified Latching exit only with Connect connectors) 2. Specify harness length; Consult door manufacturer for harness length 3. Specify Von Duprin EPT10-CON or Ives 7200 power transfer hinge Wire run options 43 Von Duprin 33A/35A Series • 43 33A/35A Mechanical options AX Accessible device The AX device is a UL certified exit device designed to meet the progressive requirements of the California Building Code for accessible openings. This device meets the 5 lbs of operating force requirement called for in chapter 11B-309.4. The AX device also exceeds ANSI/BHMA requirements. Available devices include: AX33/35A, AX33/35A-F, AX33/3549A LBL, AX33/3549A-F LBL, AX33/3549A-F LBLAFL. Additionally, all AX devices will be shipped with a new UL label clearly stating “Meets California building Code (2013) Sec. 11B-309.4” and an “AX” identifier label on device center case. See images below for reference. PNT pneumatic transfer Pneumatic controls PNT-1 is available for pneumatic latch retraction exit devices. Appearance and dimensions are identical to EPT models. RSS Red Silk Screen Red silkscreen lettering on touchpad trim. - "Emergency Exit Only, Push To Open And Sound Alarm". This comes standard on SS devices. To order, specify: Suffix RSS, 3327L-RSS RHR WH Weep holes WH is available for all 98/99 Series exit devices. Weep holes are ideal for devices that are mounted to exterior doors that can be exposed to rain and other elements. Hole spacing on 3' and 4' devices devices are every 6" on center. A 3 foot device will have 5 holes, are 4 foot device will have 7 holes. 33A/35A Mechanical options To order, specify: Suffix WH, 33A-EO-WH SS Signal switch PN Pneumatic controlled exit devices The PN feature provides remote latch bolt retraction in hazardous areas where electrically operated devices would not be permitted. The pneumatic solenoid will retract the latch bolt for momentary or prolonged periods. PN exit devices are particularly suited for use with automatic door operators. The PN feature is available on both Panic and fire exit hardware devices. The PN feature includes a special actuating linkage that gives building owners the option of mechanically or pneumatically dogging the exit device. If manual hex-key dogging is required, specify HD-PN (Dogging the device, whether mechanically or pneumatically, makes the device function as a push/pull unit and reduces the wear on its moving parts.) If cylinder dogging is required, the standard cylinder dogging is not available. When activated pneumatically, the latch bolt(s) of the exit device retract in 1/2₂ to 11/2 seconds. This pneumatic operation uses air pressure ranging from 50 to 100 pounds per square inch. Monitors pushpad and latch bolt The SS feature is used to signal the unauthorized use of an opening. This device is equipped with two internal SPDT switches. One switch monitors both the pushpad and the latch bolt assembly, making the latch bolt tamper resistant, for positive security. An additional SPDT switch is connected to the 1 1/4" (32mm) mortise with straight cam for alarm “bypass.” (Schlage cam reference B502-191). The device can be connected to a security console, or may be used as a single door alarm when used with a horn and power supply. A continuous current electric transfer must be used for transferring power from the frame to the door. To order, specify: 1. Prefix SS, example SS33AL 2. Handing Required, LHR or RHR Electrical ratings: Up to 2.0 AMPS @ 24VDC Popular SS application Unauthorized use of this opening will activate the local horn. The key switch permits inhibiting this system for authorized entry. SG Safety glow This product will function only when it is part of a pneumatic system (air compressor, air lines, pneumatic system, etc.). Contact LCN for correct control boxes. To order, specify: • Standard — Use prefix PN, example PN99NL • Hex Key Dogging — Use prefix HD-PN, example HD-PN33ANL • Special Center Case Dogging (handing is required, specify RHR or LHR) — Use prefix SD-PN, example SD-PN33ANL Self-illuminating touchpad defines the location of the exit door in dark or smoke-filled area. The Safety Glow coating is a special powder coat finish that glows brightly during low or no light conditions. This coating was developed to meet MEA standards where luminescent exit door markings are required in commercial facilities. There are no batteries or electronics, the coating is charged when exposed to light. To order, specify: Suffix SG, EL 3327A-SG 44• Von Duprin 33A/35A Series 44 33A/35A Mechanical options Dogging options LD Less dogging Less Dogging is available in all 33A/35A Panic Exit devices to remove the dogging option. To order, specify: 1. Use prefix LD, example LD33AL CD Cylinder dogging Cylinder dogging is available on all 33A/35A Panic Exit devices to replace the standard hex key dogging. Unit requires a standard 1¹⁄₄" (32mm) mortise cylinder with a straight cam (Schlage Cam B502-191 reference). To order, specify: 1. Use prefix, CD, example CD33AL CDK Cylinder dogging kit For field conversion, a cylinder dogging conversion kit is available. Cannot be added to fire exit hardware. Order: 33A/99CDK or 35A/98CDK, specify finish Dummy pushpad The 330 dummy pushpad is designed as a companion unit for all 33A devices. The 350 dummy pushpad is a companion unit for all 35A devices. The pushpad is rigid or nonfunctioning. A push/pull operation can be accomplished by using 386DT, 360L-DT, 550DT, 392-6 trim or any Ives Pull. The 330/350 can be equipped with a functional pushpad and will accommodate an RX switch. Specify RX-330. May also be equipped with the RX2, double RX switch. Specify RX2-330 To order, specify: 1. 330 or 350 2. Size 3' or 4' (914mm or 1219mm) 3. Finish, US3, US4, US10, US26, US26D, US28, 313AN, 315AN, 350 Only US32D. 33A/35A Mechanical options 45 Von Duprin 33A/35A Series • 45 33A/35A Device options & accessories RG-27 Vertical rod and latch guard Series RG-27 Vertical rod and latch guards protect the bottom rods of exit devices from the damaging impacts of carts or gurneys passing through doors. (If bottom rods become damaged, the exit device will not function as intended and can jeopardize the ability to exit safely during an emergency.) In addition to protecting the vertical rod, the guard provides a smooth, unobstructed surface so the door can be pushed open easily with the bumpers of a wheelchair. The latch guard portion is 10" high. The standard latch guard features a 45° ramp. The extended latch guard offers a continuous ramp in 3' or 4' widths. Device options & accessories All stainless steel construction in US32D finish. Latch guards can cover latches as large as 1 1/4"W x 10"H x 1 7/8" projection. Rod Guard Extended latch guard Latch Guard 10" 12" 2 1/4" 4 3/8" LBR/LBL Less bottom rod/Less bottom latch LBR/LBL option is available, using a spring loaded auxiliary latch bolt installed in the lower door edge. When exposed to heat the auxiliary latch bolt releases, keeping the doors in alignment and closed during a fire. UL listed 3 hours on hollow metal doors double egress, 90 minute swinging same direction, and 20 minutes wood doors (consult wood door manufacturer). Fits door stiles as narrow as 3 5/8". LBR/LBL devices must be ordered in pairs or must be used in conjunction with an approved automatic or constant latching flush bolt. LBR/LBL used on non-fire rated devices, the spring loaded auxiliary latch bolt is not required. Device is supplied less bottom rod, latch and strike. PL Pullman latch When PL is specified the standard latches are replaced with pullman style latches. Pullman latches are always extended and are most commonly used in conjunction with electric strikes and LBR-less bottom rod application. Not available with Fire rated devices. Not recommended where security is of the utmost since latches do not deadlock. GBK Glass bead kit Glass bead conversion kits are available for all 33A/35A Series devices for use on doors with raised glass beads. Each kit consists of 1/4" (6mm) shim sets. GBK for Surface vertical rod ships with 1/8" shims for rod guides. To order, specify: 1. 33AGBK 2. Device type (Rim, mortise, surface vertical rod, concealed vertical rod) 3. Wood door, when used with concealed vertical rod WDA Cover plate kit Models RGO Rod guard only (Projection 1 3/16") RG-27 Rod and latch guard RG-27-3 3' (914mm) Rod guard and extended latch guard RG-27-4 4' (1219mm) Rod guard and extended latch guard LGO Latch guard only LGO-3 3' (914mm) Extended latch guard only LGO-4 4' (1219mm) Extended latch guard only Note: Wood doors - Can be used on fire doors with high density blocking with sheet metal screws. For non-fire rated wood doors use sex bolt. For wood door applications, used to cover up door preparations for control, also prevents the control from boring into the wood door. Finished to match control. #10WDA Cover plate kit for 370 Series controls 7 7/8" 7 7/8" To order, specify: 1. Model number. 2. Handing (except on RGO). 3. Door material if other than Hollow metal. 4. Optional sex bolt mounting available. #33A-WDA Cover plate kit for 360 Series controls 2 1/16" 46• Von Duprin 33A/35A Series 46 2 1/16" 33A/35A Device options & accessories Mullions Removable steel mullions provide single door performance in double door openings with rim devices. Mullions are easily removed by loosening bottom set screw and removing top fitting cover. The top mullion fitting is attached to the frame and is concealed by the fitting cover. Steel mullions are 2" (51mm) wide and 3" (76mm) deep, with a wall thickness of 1/8" (3mm). Mullions are shipped with mounting screws and prepared for strikes. Strikes are not included except where indicated. Steel mullions are available in SP28 and SP313 finishes. Consult factory for other powder coat finish options. KR – Keyed removable steel mullions make removal faster and easier by a single operation of the mortise cylinder. Once mullion is removed, large equipment or furniture can freely pass through the opening. The unit will self lock when reinstalled, without the use of the cylinder key. Uses a 1 1/4" mortise cylinder with a straight cam (Schlage cam reference L583-475). Cylinders are sold separately. Prefix mullion model with “KR”. Aluminum mullions are available in US4, US10, US28, 313 and 315 finishes. Consult factory for other powder coat finish options. Aluminum mullions are not available keyed removable. Stock hollow metal applications for devices mounted to cover ANSI 161 cutouts are higher than the standard mullion strike location. Consult the factory for special strike preparation or order a blank mullion. See below. Blank mullions are furnished without strike preparation. They are used to mount devices at a strike height different from the standard mullion preparation. To order, specify: 1. For keyed Removable option on steel mullions, prefix model number with “KR” 2. Model number 3. Height of opening 4. Finish 5. Handing if required 6. Centerline deviation (refer to device template for standard centerline) 7. Strikes, when required, should be ordered with device Keyed removable steel mullions Steel mullions 1654 Prepared for two 1606 strikes. If 1606 strikes are not specified on the order, two per mullion will be added. Additional charges apply. 4954 Prepared for 264 or 299 strikes. For use with all Von Duprin Panic rim devices. 9954 Prepared for and must be used with two 268 strikes (88-F device), or two 499F (22-F, 33A-F, 35A-F, 98-F, 99F devices). UL fire labeled mullion for up to 3 hour opening using Von Duprin fire exit rim devices. This mullion is not easily removed due to special fittings. 33A-F and 35A-F devices are rated up to 10'0" (3048 mm). Note: If 268 or 499F strikes are not specified on the order, two per mullion will be added. Additional charges apply. 4754 Prepared for two 4263 monitor strikes. 4854 Prepared for one 299 and one 6111 electric strike. Indicate handing for electric strike. Device options & accessories Removable aluminum mullions are 1 1/16" (27mm) wide on face closest to the door and 23/8" (60mm) at the widest point. The depth is 3 1/8" (79mm) with a wall thickness of 1/8" (3mm). Removable mullions 9854 Prepared for one 268 or 499F strike and one 6111 electric strike. Indicate handing for electric strike. UL fire labelled mullion for up to 3 hour openings up to 8' x 8' (2438mm x 2438mm) using Von Duprin fire exit rim devices Aluminum mullions 5654 Prepared for two 299 strikes. 5754 Prepared for 1408 double strike. 47 Von Duprin 33A/35A Series • 47 33A/35A Additional information UL Listed — Fire exit hardware label/Opening size Single door Double door Exit device 33A/35A-F 3 Hour 4' x 10' Same direction Double egress 3 Hour 8' x 8' (w/ KR98/9954 mullion) – 3 Hour 8' x 10' (w/ 98/9954 mullion) 3327A-F – 90 Min. 8' x 10' 3 Hour 8' x 10' 3527A-F – 90 Min. 8' x 10' 3 Hour 8' x 10' 3347A-F – 90 Min. 8' x 10' 3 Hour 8' x 10' 3547A-F – 90 Min. 8' x 10' 3 Hour 8' x 10' 3348A-F – 90 Min. 8' x 10' 3 Hour 8' x 10' 3548A-F – 90 Min. 8' x 10' 3 Hour 8' x 10' 3349A-F – 90 Min. 8' x 10' 3 Hour 8' x 10' 3549A-F – 90 Min. 8' x 10' 3 Hour 8' x 10' Additional information When using the 3347A-F and 3547A-F in a wood door application, consult wood door manufacturers for current UL listings. Cylinders Cylinders are not furnished with device or trim and must be specified when ordering. Refer to trim pages for cylinder type. Mortise — 3215 (Schlage 20-001, B502-191 cam) Dogged (inverted) cam Undogged cam (standard operations) For cylinder dogging or 360L For standard trim functions or 360L-NL 48• Von Duprin 33A/35A Series 48 Rim — 3216 (Schlage 20-022 cam) 33A/35A Finishes Finishes* US number BHMA number Color US number BHMA number Chromium, polished US26 625 Bronze, dull US10 612 Anodized, aluminum US28 628 US15 619 Chromium, dull US26D 626 Satin stainless steel US32D 630 Brass, polished US3 605 Duranodic dark bronze 313 710 Brass, dull US4 606 Black, painted (not flat powder) SPBLK 693 Flat Black US19/ 315 622/711 Aged bronze – 643e Color Satin nickel Available for 35A ONLY Finishes Special finishes Color US number BHMA number Satin chrome, Antimicrobial US26DAM 626-AM Satin stainless steel, antimicrobial US32DAM 630-AM Pushpad Options — Knurled Embossed “Push” Braille (Caution-Stairwell), satin stainless steel only RSS – (Emergency Exit – Push to open and sound alarm) – Red Silkscreen lettering on US32D * NOTE: Durable powder coated finishes available at specific special request. PLEASE CONTACT FACTORY. 49 Von Duprin 33A/35A Series • 49 About Allegion Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands like CISA®, Interflex®, LCN®, Schlage®, SimonsVoss® and Von Duprin®. Focusing on security around the door and adjacent areas, Allegion produces a range of solutions for homes, businesses, schools and other institutions. Allegion is a $2 billion company, with products sold in almost 130 countries. For more, visit www.allegion.com © 2017 Allegion 006593, Rev. 04/17 www.allegion.com/us
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Create Date : 2017:04:11 11:59:22-04:00 Metadata Date : 2017:05:07 15:33:49-04:00 Modify Date : 2017:05:07 15:33:49-04:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:1e152e19-96bc-4238-b1d1-b62dd9383ab1 Original Document ID : xmp.did:5DF51FCC472168118A6DCBE4F6556AD0 Document ID : xmp.id:F13FA128F9226811808399026382A278 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:F03FA128F9226811808399026382A278 Derived From Document ID : xmp.did:F03FA128F9226811808399026382A278 Derived From Original Document ID: xmp.did:5DF51FCC472168118A6DCBE4F6556AD0 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2017:04:11 11:59:22-04:00 Format : application/pdf Title : Von Duprin 33A.35A Series Catalog Description : Exit Devices; 33A Series; 35 A Series Creator : Subject : Exit Devices, 33A Series, 35 A Series Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 50 Keywords : Exit, Devices;, 33A, Series;, 35, A, Series Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools